C++ ANIM_editkeyframes_select函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ANIM_editkeyframes_select函数的典型用法代码示例。如果您正苦于以下问题：C++ ANIM_editkeyframes_select函数的具体用法？C++ ANIM_editkeyframes_select怎么用？C++ ANIM_editkeyframes_select使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ANIM_editkeyframes_select函数的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: actkeys_mselect_single

/* option 1) select keyframe directly under mouse */
static void actkeys_mselect_single(bAnimContext *ac, bAnimListElem *ale, short select_mode, float selx)
{
	KeyframeEditData ked = {{NULL}};
	KeyframeEditFunc select_cb, ok_cb;
	
	/* get functions for selecting keyframes */
	select_cb = ANIM_editkeyframes_select(select_mode);
	ok_cb = ANIM_editkeyframes_ok(BEZT_OK_FRAME);
	ked.f1 = selx;
	
	/* select the nominated keyframe on the given frame */
	if (ale->type == ANIMTYPE_GPLAYER)
		ED_gpencil_select_frame(ale->data, selx, select_mode);
	else if (ale->type == ANIMTYPE_MASKLAYER)
		ED_mask_select_frame(ale->data, selx, select_mode);
	else {
		if (ELEM(ac->datatype, ANIMCONT_GPENCIL, ANIMCONT_MASK) &&
		    (ale->type == ANIMTYPE_SUMMARY) && (ale->datatype == ALE_ALL))
		{
			ListBase anim_data = {NULL, NULL};
			int filter;
			filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE /*| ANIMFILTER_CURVESONLY */ | ANIMFILTER_NODUPLIS);
			ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
			for (ale = anim_data.first; ale; ale = ale->next) {
				if (ale->type == ANIMTYPE_GPLAYER)
					ED_gpencil_select_frame(ale->data, selx, select_mode);
				else if (ale->type == ANIMTYPE_MASKLAYER)
					ED_mask_select_frame(ale->data, selx, select_mode);
			}
		}
		else {
			ANIM_animchannel_keyframes_loop(&ked, ac->ads, ale, ok_cb, select_cb, NULL);
		}
	}
}

开发者ID:vanangamudi，项目名称:blender-main，代码行数:36，代码来源:action_select.c

示例2: deselect_action_keys

/* Deselects keyframes in the action editor
 *	- This is called by the deselect all operator, as well as other ones!
 *
 * 	- test: check if select or deselect all
 *	- sel: how to select keyframes (SELECT_*)
 */
static void deselect_action_keys (bAnimContext *ac, short test, short sel)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditData ked= {{NULL}};
	KeyframeEditFunc test_cb, sel_cb;
	
	/* determine type-based settings */
	if (ac->datatype == ANIMCONT_GPENCIL)
		filter= (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE | ANIMFILTER_NODUPLIS);
	else
		filter= (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE /*| ANIMFILTER_CURVESONLY*/ | ANIMFILTER_NODUPLIS);
	
	/* filter data */
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
	
	/* init BezTriple looping data */
	test_cb= ANIM_editkeyframes_ok(BEZT_OK_SELECTED);
	
	/* See if we should be selecting or deselecting */
	if (test) {
		for (ale= anim_data.first; ale; ale= ale->next) {
			if (ale->type == ANIMTYPE_GPLAYER) {
				if (is_gplayer_frame_selected(ale->data)) {
					sel= SELECT_SUBTRACT;
					break;
				}
			}
			else {
				if (ANIM_fcurve_keyframes_loop(&ked, ale->key_data, NULL, test_cb, NULL)) {
					sel= SELECT_SUBTRACT;
					break;
				}
			}
		}
	}
	
	/* convert sel to selectmode, and use that to get editor */
	sel_cb= ANIM_editkeyframes_select(sel);
	
	/* Now set the flags */
	for (ale= anim_data.first; ale; ale= ale->next) {
		if (ale->type == ANIMTYPE_GPLAYER)
			set_gplayer_frame_selection(ale->data, sel);
		else
			ANIM_fcurve_keyframes_loop(&ked, ale->key_data, NULL, sel_cb, NULL); 
	}
	
	/* Cleanup */
	BLI_freelistN(&anim_data);
}

开发者ID:mik0001，项目名称:Blender，代码行数:59，代码来源:action_select.c

示例3: markers_selectkeys_between

/* TODO, this is almost an _exact_ duplicate of a function of the same name in graph_select.c
 * should de-duplicate - campbell */
static void markers_selectkeys_between(bAnimContext *ac)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditFunc ok_cb, select_cb;
	KeyframeEditData ked = {{NULL}};
	float min, max;
	
	/* get extreme markers */
	ED_markers_get_minmax(ac->markers, 1, &min, &max);
	min -= 0.5f;
	max += 0.5f;
	
	/* get editing funcs + data */
	ok_cb = ANIM_editkeyframes_ok(BEZT_OK_FRAMERANGE);
	select_cb = ANIM_editkeyframes_select(SELECT_ADD);

	ked.f1 = min;
	ked.f2 = max;
	
	/* filter data */
	filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE /*| ANIMFILTER_CURVESONLY */ | ANIMFILTER_NODUPLIS);
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
	
	/* select keys in-between */
	for (ale = anim_data.first; ale; ale = ale->next) {
		AnimData *adt = ANIM_nla_mapping_get(ac, ale);
		
		if (adt) {
			ANIM_nla_mapping_apply_fcurve(adt, ale->key_data, 0, 1);
			ANIM_fcurve_keyframes_loop(&ked, ale->key_data, ok_cb, select_cb, NULL);
			ANIM_nla_mapping_apply_fcurve(adt, ale->key_data, 1, 1);
		}
		else if (ale->type == ANIMTYPE_GPLAYER) {
			ED_gplayer_frames_select_border(ale->data, min, max, SELECT_ADD);
		}
		else if (ale->type == ANIMTYPE_MASKLAYER) {
			ED_masklayer_frames_select_border(ale->data, min, max, SELECT_ADD);
		}
		else {
			ANIM_fcurve_keyframes_loop(&ked, ale->key_data, ok_cb, select_cb, NULL);
		}
	}
	
	/* Cleanup */
	ANIM_animdata_freelist(&anim_data);
}

开发者ID:mgschwan，项目名称:blensor，代码行数:51，代码来源:action_select.c

示例4: actkeys_mselect_single

/* option 1) select keyframe directly under mouse */
static void actkeys_mselect_single (bAnimContext *ac, bAnimListElem *ale, short select_mode, float selx)
{
	KeyframeEditData ked= {{NULL}};
	KeyframeEditFunc select_cb, ok_cb;
	
	/* get functions for selecting keyframes */
	select_cb= ANIM_editkeyframes_select(select_mode);
	ok_cb= ANIM_editkeyframes_ok(BEZT_OK_FRAME);
	ked.f1= selx;
	
	/* select the nominated keyframe on the given frame */
	if (ale->type == ANIMTYPE_GPLAYER)
		select_gpencil_frame(ale->data, selx, select_mode);
	else
		ANIM_animchannel_keyframes_loop(&ked, ac->ads, ale, ok_cb, select_cb, NULL);
}

开发者ID:mik0001，项目名称:Blender，代码行数:17，代码来源:action_select.c

示例5: actkeys_mselect_column

/* Option 3) Selects all visible keyframes in the same frame as the mouse click */
static void actkeys_mselect_column(bAnimContext *ac, short select_mode, float selx)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditFunc select_cb, ok_cb;
	KeyframeEditData ked = {{NULL}};
	
	/* set up BezTriple edit callbacks */
	select_cb = ANIM_editkeyframes_select(select_mode);
	ok_cb = ANIM_editkeyframes_ok(BEZT_OK_FRAME);
	
	/* loop through all of the keys and select additional keyframes
	 * based on the keys found to be selected above
	 */
	if (ELEM(ac->datatype, ANIMCONT_GPENCIL, ANIMCONT_MASK))
		filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE /*| ANIMFILTER_CURVESONLY */ | ANIMFILTER_NODUPLIS);
	else
		filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE | ANIMFILTER_NODUPLIS);
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
	
	for (ale = anim_data.first; ale; ale = ale->next) {
		AnimData *adt = ANIM_nla_mapping_get(ac, ale);
		
		/* set frame for validation callback to refer to */
		if (adt)
			ked.f1 = BKE_nla_tweakedit_remap(adt, selx, NLATIME_CONVERT_UNMAP);
		else
			ked.f1 = selx;
		
		/* select elements with frame number matching cfra */
		if (ale->type == ANIMTYPE_GPLAYER)
			ED_gpencil_select_frame(ale->key_data, selx, select_mode);
		else if (ale->type == ANIMTYPE_MASKLAYER)
			ED_mask_select_frame(ale->key_data, selx, select_mode);
		else
			ANIM_fcurve_keyframes_loop(&ked, ale->key_data, ok_cb, select_cb, NULL);
	}
	
	/* free elements */
	BLI_freelistN(&ked.list);
	ANIM_animdata_freelist(&anim_data);
}

开发者ID:mgschwan，项目名称:blensor，代码行数:45，代码来源:action_select.c

示例6: actkeys_mselect_channel_only

/* option 4) select all keyframes in same channel */
static void actkeys_mselect_channel_only(bAnimContext *ac, bAnimListElem *ale, short select_mode)
{
	KeyframeEditFunc select_cb;
	
	/* get functions for selecting keyframes */
	select_cb = ANIM_editkeyframes_select(select_mode);
	
	/* select all keyframes in this channel */
	if (ale->type == ANIMTYPE_GPLAYER) {
		ED_gpencil_select_frames(ale->data, select_mode);
	}
	else if (ale->type == ANIMTYPE_MASKLAYER) {
		ED_mask_select_frames(ale->data, select_mode);
	}
	else {
		if (ELEM(ac->datatype, ANIMCONT_GPENCIL, ANIMCONT_MASK) &&
		    (ale->type == ANIMTYPE_SUMMARY) && (ale->datatype == ALE_ALL))
		{
			ListBase anim_data = {NULL, NULL};
			int filter;
			
			filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE /*| ANIMFILTER_CURVESONLY */ | ANIMFILTER_NODUPLIS);
			ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
			
			for (ale = anim_data.first; ale; ale = ale->next) {
				if (ale->type == ANIMTYPE_GPLAYER) {
					ED_gpencil_select_frames(ale->data, select_mode);
				}
				else if (ale->type == ANIMTYPE_MASKLAYER) {
					ED_mask_select_frames(ale->data, select_mode);
				}
			}
			
			ANIM_animdata_freelist(&anim_data);
		}
		else {
			ANIM_animchannel_keyframes_loop(NULL, ac->ads, ale, NULL, select_cb, NULL);
		}
	}
}

开发者ID:mgschwan，项目名称:blensor，代码行数:41，代码来源:action_select.c

示例7: region_select_action_keys

static void region_select_action_keys(bAnimContext *ac, const rctf *rectf_view, short mode, short selectmode, void *data)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditData ked;
	KeyframeEditFunc ok_cb, select_cb;
	View2D *v2d = &ac->ar->v2d;
	rctf rectf, scaled_rectf;
	float ymin = 0, ymax = (float)(-ACHANNEL_HEIGHT_HALF(ac));
	
	/* convert mouse coordinates to frame ranges and channel coordinates corrected for view pan/zoom */
	UI_view2d_region_to_view_rctf(v2d, rectf_view, &rectf);
	
	/* filter data */
	filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE | ANIMFILTER_LIST_CHANNELS);
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
	
	/* get beztriple editing/validation funcs  */
	select_cb = ANIM_editkeyframes_select(selectmode);
	ok_cb = ANIM_editkeyframes_ok(mode);
	
	/* init editing data */
	memset(&ked, 0, sizeof(KeyframeEditData));
	if (mode == BEZT_OK_CHANNEL_LASSO) {
		KeyframeEdit_LassoData *data_lasso = data;
		data_lasso->rectf_scaled = &scaled_rectf;
		ked.data = data_lasso;
	}
	else if (mode == BEZT_OK_CHANNEL_CIRCLE) {
		KeyframeEdit_CircleData *data_circle = data;
		data_circle->rectf_scaled = &scaled_rectf;
		ked.data = data;
	}
	else {
		ked.data = &scaled_rectf;
	}
	
	/* loop over data, doing region select */
	for (ale = anim_data.first; ale; ale = ale->next) {
		AnimData *adt = ANIM_nla_mapping_get(ac, ale);
		
		/* get new vertical minimum extent of channel */
		ymin = ymax - ACHANNEL_STEP(ac);
		
		/* compute midpoint of channel (used for testing if the key is in the region or not) */
		ked.channel_y = ymin + ACHANNEL_HEIGHT_HALF(ac);
		
		/* if channel is mapped in NLA, apply correction
		 * - Apply to the bounds being checked, not all the keyframe points,
		 *   to avoid having scaling everything
		 * - Save result to the scaled_rect, which is all that these operators
		 *   will read from
		 */
		if (adt) {
			ked.iterflags &= ~(KED_F1_NLA_UNMAP | KED_F2_NLA_UNMAP);
			ked.f1 = BKE_nla_tweakedit_remap(adt, rectf.xmin, NLATIME_CONVERT_UNMAP);
			ked.f2 = BKE_nla_tweakedit_remap(adt, rectf.xmax, NLATIME_CONVERT_UNMAP);
		}
		else {
			ked.iterflags |= (KED_F1_NLA_UNMAP | KED_F2_NLA_UNMAP); /* for summary tracks */
			ked.f1 = rectf.xmin;
			ked.f2 = rectf.xmax;
		}
		
		/* Update values for scaled_rectf - which is used to compute the mapping in the callbacks
		 * NOTE: Since summary tracks need late-binding remapping, the callbacks may overwrite these 
		 *       with the properly remapped ked.f1/f2 values, when needed
		 */
		scaled_rectf.xmin = ked.f1;
		scaled_rectf.xmax = ked.f2;
		scaled_rectf.ymin = ymin;
		scaled_rectf.ymax = ymax;
		
		/* perform vertical suitability check (if applicable) */
		if ((mode == ACTKEYS_BORDERSEL_FRAMERANGE) ||
		    !((ymax < rectf.ymin) || (ymin > rectf.ymax)))
		{
			/* loop over data selecting */
			switch (ale->type) {
#if 0 /* XXX: Keyframes are not currently shown here */
				case ANIMTYPE_GPDATABLOCK:
				{
					bGPdata *gpd = ale->data;
					bGPDlayer *gpl;
					for (gpl = gpd->layers.first; gpl; gpl = gpl->next) {
						ED_gplayer_frames_select_region(&ked, ale->data, mode, selectmode);
					}
					break;
				}
#endif
				case ANIMTYPE_GPLAYER:
				{
					ED_gplayer_frames_select_region(&ked, ale->data, mode, selectmode);
					break;
				}
				case ANIMTYPE_MASKDATABLOCK:
				{
					Mask *mask = ale->data;
//.........这里部分代码省略.........

开发者ID:mgschwan，项目名称:blensor，代码行数:101，代码来源:action_select.c

示例8: borderselect_action

static void borderselect_action (bAnimContext *ac, rcti rect, short mode, short selectmode)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditData ked;
	KeyframeEditFunc ok_cb, select_cb;
	View2D *v2d= &ac->ar->v2d;
	rctf rectf;
	float ymin=0, ymax=(float)(-ACHANNEL_HEIGHT_HALF);
	
	/* convert mouse coordinates to frame ranges and channel coordinates corrected for view pan/zoom */
	UI_view2d_region_to_view(v2d, rect.xmin, rect.ymin+2, &rectf.xmin, &rectf.ymin);
	UI_view2d_region_to_view(v2d, rect.xmax, rect.ymax-2, &rectf.xmax, &rectf.ymax);
	
	/* filter data */
	filter= (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE | ANIMFILTER_LIST_CHANNELS | ANIMFILTER_NODUPLIS);
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
	
	/* get beztriple editing/validation funcs  */
	select_cb= ANIM_editkeyframes_select(selectmode);
	
	if (ELEM(mode, ACTKEYS_BORDERSEL_FRAMERANGE, ACTKEYS_BORDERSEL_ALLKEYS))
		ok_cb= ANIM_editkeyframes_ok(BEZT_OK_FRAMERANGE);
	else
		ok_cb= NULL;
		
	/* init editing data */
	memset(&ked, 0, sizeof(KeyframeEditData));
	
	/* loop over data, doing border select */
	for (ale= anim_data.first; ale; ale= ale->next) {
		AnimData *adt= ANIM_nla_mapping_get(ac, ale);
		
		/* get new vertical minimum extent of channel */
		ymin= ymax - ACHANNEL_STEP;
		
		/* set horizontal range (if applicable) */
		if (ELEM(mode, ACTKEYS_BORDERSEL_FRAMERANGE, ACTKEYS_BORDERSEL_ALLKEYS)) {
			/* if channel is mapped in NLA, apply correction */
			if (adt) {
				ked.f1= BKE_nla_tweakedit_remap(adt, rectf.xmin, NLATIME_CONVERT_UNMAP);
				ked.f2= BKE_nla_tweakedit_remap(adt, rectf.xmax, NLATIME_CONVERT_UNMAP);
			}
			else {
				ked.f1= rectf.xmin;
				ked.f2= rectf.xmax;
			}
		}
		
		/* perform vertical suitability check (if applicable) */
		if ( (mode == ACTKEYS_BORDERSEL_FRAMERANGE) || 
			!((ymax < rectf.ymin) || (ymin > rectf.ymax)) )
		{
			/* loop over data selecting */
			if (ale->type == ANIMTYPE_GPLAYER)
				borderselect_gplayer_frames(ale->data, rectf.xmin, rectf.xmax, selectmode);
			else
				ANIM_animchannel_keyframes_loop(&ked, ac->ads, ale, ok_cb, select_cb, NULL);
		}
		
		/* set minimum extent to be the maximum of the next channel */
		ymax=ymin;
	}
	
	/* cleanup */
	BLI_freelistN(&anim_data);
}

开发者ID:mik0001，项目名称:Blender，代码行数:69，代码来源:action_select.c

示例9: borderselect_action

static void borderselect_action(bAnimContext *ac, const rcti rect, short mode, short selectmode)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditData ked;
	KeyframeEditFunc ok_cb, select_cb;
	View2D *v2d = &ac->ar->v2d;
	rctf rectf;
	float ymin = 0, ymax = (float)(-ACHANNEL_HEIGHT_HALF(ac));
	
	/* convert mouse coordinates to frame ranges and channel coordinates corrected for view pan/zoom */
	UI_view2d_region_to_view(v2d, rect.xmin, rect.ymin + 2, &rectf.xmin, &rectf.ymin);
	UI_view2d_region_to_view(v2d, rect.xmax, rect.ymax - 2, &rectf.xmax, &rectf.ymax);
	
	/* filter data */
	filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE | ANIMFILTER_LIST_CHANNELS);
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
	
	/* get beztriple editing/validation funcs  */
	select_cb = ANIM_editkeyframes_select(selectmode);
	
	if (ELEM(mode, ACTKEYS_BORDERSEL_FRAMERANGE, ACTKEYS_BORDERSEL_ALLKEYS))
		ok_cb = ANIM_editkeyframes_ok(BEZT_OK_FRAMERANGE);
	else
		ok_cb = NULL;
		
	/* init editing data */
	memset(&ked, 0, sizeof(KeyframeEditData));
	
	/* loop over data, doing border select */
	for (ale = anim_data.first; ale; ale = ale->next) {
		AnimData *adt = ANIM_nla_mapping_get(ac, ale);
		
		/* get new vertical minimum extent of channel */
		ymin = ymax - ACHANNEL_STEP(ac);
		
		/* set horizontal range (if applicable) */
		if (ELEM(mode, ACTKEYS_BORDERSEL_FRAMERANGE, ACTKEYS_BORDERSEL_ALLKEYS)) {
			/* if channel is mapped in NLA, apply correction */
			if (adt) {
				ked.iterflags &= ~(KED_F1_NLA_UNMAP | KED_F2_NLA_UNMAP);
				ked.f1 = BKE_nla_tweakedit_remap(adt, rectf.xmin, NLATIME_CONVERT_UNMAP);
				ked.f2 = BKE_nla_tweakedit_remap(adt, rectf.xmax, NLATIME_CONVERT_UNMAP);
			}
			else {
				ked.iterflags |= (KED_F1_NLA_UNMAP | KED_F2_NLA_UNMAP); /* for summary tracks */
				ked.f1 = rectf.xmin;
				ked.f2 = rectf.xmax;
			}
		}
		
		/* perform vertical suitability check (if applicable) */
		if ((mode == ACTKEYS_BORDERSEL_FRAMERANGE) ||
		    !((ymax < rectf.ymin) || (ymin > rectf.ymax)))
		{
			/* loop over data selecting */
			switch (ale->type) {
#if 0 /* XXX: Keyframes are not currently shown here */
				case ANIMTYPE_GPDATABLOCK:
				{
					bGPdata *gpd = ale->data;
					bGPDlayer *gpl;
					for (gpl = gpd->layers.first; gpl; gpl = gpl->next) {
						ED_gplayer_frames_select_border(gpl, rectf.xmin, rectf.xmax, selectmode);
					}
					break;
				}
#endif
				case ANIMTYPE_GPLAYER:
					ED_gplayer_frames_select_border(ale->data, rectf.xmin, rectf.xmax, selectmode);
					break;
				case ANIMTYPE_MASKDATABLOCK:
				{
					Mask *mask = ale->data;
					MaskLayer *masklay;
					for (masklay = mask->masklayers.first; masklay; masklay = masklay->next) {
						ED_masklayer_frames_select_border(masklay, rectf.xmin, rectf.xmax, selectmode);
					}
					break;
				}
				case ANIMTYPE_MASKLAYER:
					ED_masklayer_frames_select_border(ale->data, rectf.xmin, rectf.xmax, selectmode);
					break;
				default:
					ANIM_animchannel_keyframes_loop(&ked, ac->ads, ale, ok_cb, select_cb, NULL);
					break;
			}
		}
		
		/* set minimum extent to be the maximum of the next channel */
		ymax = ymin;
	}
	
	/* cleanup */
	ANIM_animdata_freelist(&anim_data);
}

开发者ID:mgschwan，项目名称:blensor，代码行数:98，代码来源:action_select.c

示例10: actkeys_select_leftright

static void actkeys_select_leftright(bAnimContext *ac, short leftright, short select_mode)
{
	ListBase anim_data = {NULL, NULL};
	bAnimListElem *ale;
	int filter;
	
	KeyframeEditFunc ok_cb, select_cb;
	KeyframeEditData ked = {{NULL}};
	Scene *scene = ac->scene;
	
	/* if select mode is replace, deselect all keyframes (and channels) first */
	if (select_mode == SELECT_REPLACE) {
		select_mode = SELECT_ADD;
		
		/* - deselect all other keyframes, so that just the newly selected remain
		 * - channels aren't deselected, since we don't re-select any as a consequence
		 */
		deselect_action_keys(ac, 0, SELECT_SUBTRACT);
	}
	
	/* set callbacks and editing data */
	ok_cb = ANIM_editkeyframes_ok(BEZT_OK_FRAMERANGE);
	select_cb = ANIM_editkeyframes_select(select_mode);
	
	if (leftright == ACTKEYS_LRSEL_LEFT) {
		ked.f1 = MINAFRAMEF;
		ked.f2 = (float)(CFRA + 0.1f);
	}
	else {
		ked.f1 = (float)(CFRA - 0.1f);
		ked.f2 = MAXFRAMEF;
	}
	
	/* filter data */
	if (ELEM(ac->datatype, ANIMCONT_GPENCIL, ANIMCONT_MASK))
		filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE | ANIMFILTER_NODUPLIS);
	else
		filter = (ANIMFILTER_DATA_VISIBLE | ANIMFILTER_LIST_VISIBLE /*| ANIMFILTER_CURVESONLY*/ | ANIMFILTER_NODUPLIS);
	ANIM_animdata_filter(ac, &anim_data, filter, ac->data, ac->datatype);
		
	/* select keys */
	for (ale = anim_data.first; ale; ale = ale->next) {
		AnimData *adt = ANIM_nla_mapping_get(ac, ale);
		
		if (adt) {
			ANIM_nla_mapping_apply_fcurve(adt, ale->key_data, 0, 1);
			ANIM_fcurve_keyframes_loop(&ked, ale->key_data, ok_cb, select_cb, NULL);
			ANIM_nla_mapping_apply_fcurve(adt, ale->key_data, 1, 1);
		}
		else if (ale->type == ANIMTYPE_GPLAYER)
			ED_gplayer_frames_select_border(ale->data, ked.f1, ked.f2, select_mode);
		else if (ale->type == ANIMTYPE_MASKLAYER)
			ED_masklayer_frames_select_border(ale->data, ked.f1, ked.f2, select_mode);
		else
			ANIM_fcurve_keyframes_loop(&ked, ale->key_data, ok_cb, select_cb, NULL);
	}
	
	/* Sync marker support */
	if (select_mode == SELECT_ADD) {
		SpaceAction *saction = (SpaceAction *)ac->sl;
		
		if ((saction) && (saction->flag & SACTION_MARKERS_MOVE)) {
			ListBase *markers = ED_animcontext_get_markers(ac);
			TimeMarker *marker;
			
			for (marker = markers->first; marker; marker = marker->next) {
				if (((leftright == ACTKEYS_LRSEL_LEFT)  && (marker->frame <  CFRA)) ||
				    ((leftright == ACTKEYS_LRSEL_RIGHT) && (marker->frame >= CFRA)))
				{
					marker->flag |= SELECT;
				}
				else {
					marker->flag &= ~SELECT;
				}
			}
		}
	}

	/* Cleanup */
	ANIM_animdata_freelist(&anim_data);
}

开发者ID:mgschwan，项目名称:blensor，代码行数:81，代码来源:action_select.c

注：本文中的ANIM_editkeyframes_select函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ANIM_nla_mapping_get函数代码示例发布时间：2022-05-30

C++ ANIM_editkeyframes_ok函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18443|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9750|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8230|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8590|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8503|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9467|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8484|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7910|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8466|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7435|2022-11-06

客服电话

电子邮件

C++ ANIM_editkeyframes_select函数代码示例

示例1: actkeys_mselect_single

示例2: deselect_action_keys

示例3: markers_selectkeys_between

示例4: actkeys_mselect_single

示例5: actkeys_mselect_column

示例6: actkeys_mselect_channel_only

示例7: region_select_action_keys

示例8: borderselect_action

示例9: borderselect_action

示例10: actkeys_select_leftright

请发表评论

全部评论

上一篇：

下一篇：

序言 - Kubernetes 实践指南

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053