本文整理汇总了C++中HAL_READ_UINT8函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_READ_UINT8函数的具体用法？C++ HAL_READ_UINT8怎么用？C++ HAL_READ_UINT8使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了HAL_READ_UINT8函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
cyg_uint8 eir, c;
channel_data_t* chan = (channel_data_t*)__ch_data;
CYGARC_HAL_SAVE_GP();
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
HAL_READ_UINT8(chan->base+CYG_DEVICE_BK0_EIR, eir);
*__ctrlc = 0;
if( (eir & CYG_DEVICE_BK0_EIR_mask) == CYG_DEVICE_BK0_EIR_IRQ_RX ) {
HAL_READ_UINT8(chan->base+CYG_DEVICE_BK0_RXD, c);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:27，代码来源:pc87338.c
示例2: cyg_hal_plf_sci_isr
static int
cyg_hal_plf_sci_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
cyg_uint8 c, sr;
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
int res = 0;
CYGARC_HAL_SAVE_GP();
*__ctrlc = 0;
HAL_READ_UINT8(base+_REG_SCSSR, sr);
if (sr & CYGARC_REG_SCI_SCSSR_ORER) {
// Serial RX overrun. Clear error and hope protocol recovers.
HAL_WRITE_UINT8(base+_REG_SCSSR,
CYGARC_REG_SCI_SCSSR_CLEARMASK & ~CYGARC_REG_SCI_SCSSR_ORER);
res = CYG_ISR_HANDLED;
} else if (sr & CYGARC_REG_SCI_SCSSR_RDRF) {
// Received character
HAL_READ_UINT8(base+_REG_SCRDR, c);
// Clear buffer full flag.
HAL_WRITE_UINT8(base+_REG_SCSSR,
CYGARC_REG_SCI_SCSSR_CLEARMASK & ~CYGARC_REG_SCI_SCSSR_RDRF);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:33，代码来源:sh2_sci.c
示例3: cyg_hal_plf_serial_getc_nonblock
static cyg_bool
cyg_hal_plf_serial_getc_nonblock(void* __ch_data, cyg_uint8* ch)
{
cyg_uint8* port;
cyg_uint8 _status;
// Some of the diagnostic print code calls through here with no idea what the ch_data is.
// Go ahead and assume it is channels[0].
if (__ch_data == 0)
__ch_data = (void*)&channels[0];
port = ((channel_data_t*)__ch_data)->base;
HAL_READ_UINT8(port + _SERIAL_SR, _status);
if ((_status & SIO_LSTAT_RRDY) == 0)
return false;
HAL_READ_UINT8(port + _SERIAL_RXR, *ch);
// We must ack the interrupt caused by that read to avoid
// confusing the GDB stub ROM.
HAL_INTERRUPT_ACKNOWLEDGE( CYGNUM_HAL_INTERRUPT_SERIAL_0_RX );
return true;
}
开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:25，代码来源:am33_serial.c
示例4: cyg_hal_plf_scif_getc_nonblock
//static
cyg_bool
cyg_hal_plf_scif_getc_nonblock(void* __ch_data, cyg_uint8* ch)
{
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
cyg_uint16 fdr, sr;
cyg_bool res = false;
HAL_READ_UINT16(base+_REG_SCSSR, sr);
if (sr & CYGARC_REG_SCIF_SCSSR_ER) {
cyg_uint8 ssr2;
HAL_WRITE_UINT16(base+_REG_SCFER, 0);
HAL_READ_UINT8(base+_REG_SC2SSR, ssr2);
ssr2 &= ~CYGARC_REG_SCIF_SC2SSR_ORER;
HAL_WRITE_UINT8(base+_REG_SC2SSR, ssr2);
HAL_WRITE_UINT16(base+_REG_SCSSR,
CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~(CYGARC_REG_SCIF_SCSSR_BRK | CYGARC_REG_SCIF_SCSSR_FER | CYGARC_REG_SCIF_SCSSR_PER));
}
HAL_READ_UINT16(base+_REG_SCFDR, fdr);
if (0 != (fdr & CYGARC_REG_SCIF_SCFDR_RCOUNT_MASK)) {
HAL_READ_UINT8(base+_REG_SCFRDR, *ch);
// Clear DR/RDF flags
HAL_READ_UINT16(base+_REG_SCSSR, sr);
HAL_WRITE_UINT16(base+_REG_SCSSR,
CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~(CYGARC_REG_SCIF_SCSSR_RDF | CYGARC_REG_SCIF_SCSSR_DR));
res = true;
}
return res;
}
开发者ID:EPiCS，项目名称:reconos_v2，代码行数:35，代码来源:sh2_scif.c
示例5: cyg_hal_plf_serial_isr
static int CYGOPT_HAL_KINETIS_DIAG_FLASH_SECTION_ATTR
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
channel_data_t* chan = (channel_data_t*)__ch_data;
CYG_ADDRESS uart_p = (CYG_ADDRESS) chan->base;
cyg_uint8 uart_s1;
int res = 0;
cyg_uint8 ch_in;
CYGARC_HAL_SAVE_GP();
*__ctrlc = 0;
HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_S1, uart_s1);
if (uart_s1 & CYGHWR_DEV_FREESCALE_UART_S1_RDRF) {
HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_D, ch_in);
if( cyg_hal_is_break( (char *) &ch_in , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:benchfox，项目名称:ecos，代码行数:28，代码来源:hal_diag.c
示例6: ps2_send_command
// Sending out a command. The controller command, if any, gets sent here.
// This is followed by the first byte for the keyboard or mouse. The
// remaining bytes and any retransmits will be handled by the interrupt
// handler.
static void
ps2_send_command(int controller_command, unsigned char* command, int length, int mouse)
{
int status;
CYG_PRECONDITION(NULL == ps2_command, "Only one send command is allowed at a time");
CYG_PRECONDITION((KC_CONTROL_NULL != controller_command) || (NULL != command), "no-op");
CYG_PRECONDITION(!mouse || (KC_CONTROL_NULL == controller_command), "cannot combine controller and mouse commands");
ps2_command = command;
ps2_command_index = 0;
ps2_command_length = length;
ps2_command_mouse = 0;
ps2_command_ack = 0;
if (KC_CONTROL_NULL != controller_command) {
do {
HAL_READ_UINT8(KC_STATUS, status);
} while (status & KC_STATUS_INPB);
HAL_WRITE_UINT8(KC_CONTROL, controller_command);
}
if (length > 0) {
if (mouse) {
do {
HAL_READ_UINT8(KC_STATUS, status);
} while (status & KC_STATUS_INPB);
HAL_WRITE_UINT8(KC_CONTROL, KC_CONTROL_WRITE_AUX);
}
do {
HAL_READ_UINT8(KC_STATUS, status);
} while (status & KC_STATUS_INPB);
HAL_WRITE_UINT8(KC_INPUT, command[0]);
}
}
开发者ID:Palantir555，项目名称:ecos-mars-zx3，代码行数:39，代码来源:ps2kbdmou_ecos.c
示例7: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
char c;
cyg_uint8 lsr;
CYGARC_HAL_SAVE_GP();
cyg_drv_interrupt_acknowledge(chan->isr_vector);
*__ctrlc = 0;
HAL_READ_UINT8(chan->base+CYG_DEV_LSR, lsr);
if ( (lsr & SIO_LSR_DR) != 0 ) {
HAL_READ_UINT8(chan->base+CYG_DEV_RBR, c);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:26，代码来源:hal_diag.c
示例8: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
channel_data_t* chan = (channel_data_t*)__ch_data;
cyg_uint8 iir;
int res = 0;
CYGARC_HAL_SAVE_GP();
HAL_READ_UINT8(chan->base+PXA2X0_UART_IIR, iir);
iir &= PXA2X0_UART_IIR_ID_MASK;
*__ctrlc = 0;
if ( iir == 0x04 ) {
cyg_uint8 c, lsr;
HAL_READ_UINT8(chan->base+PXA2X0_UART_LSR, lsr);
if (lsr & PXA2X0_UART_LSR_DR) {
HAL_READ_UINT8(chan->base+PXA2X0_UART_RBR, c);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
}
// Acknowledge the interrupt
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:32，代码来源:hal_diag.c
示例9: cyg_hal_plf_scif_putc
void
cyg_hal_plf_scif_putc(void* __ch_data, cyg_uint8 c)
{
channel_data_t* chan = (channel_data_t*)__ch_data;
cyg_uint8* base = chan->base;
cyg_uint16 fdr, sr;
cyg_uint8 scscr = 0;
CYGARC_HAL_SAVE_GP();
HAL_READ_UINT8(base+_REG_SCSCR, scscr);
if (chan->irda_mode) {
HAL_WRITE_UINT8(base+_REG_SCSCR, scscr|CYGARC_REG_SCIF_SCSCR_TE);
}
#ifdef CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX
if (chan->async_rxtx_mode) {
HAL_WRITE_UINT8(base+_REG_SCSCR, (scscr|CYGARC_REG_SCIF_SCSCR_TE)&~CYGARC_REG_SCIF_SCSCR_RE);
}
#endif
do {
HAL_READ_UINT16(base+_REG_SCFDR, fdr);
} while (((fdr & CYGARC_REG_SCIF_SCFDR_TCOUNT_MASK) >> CYGARC_REG_SCIF_SCFDR_TCOUNT_shift) == 16);
HAL_WRITE_UINT8(base+_REG_SCFTDR, c);
// Clear FIFO-empty/transmit end flags (read back SR first)
HAL_READ_UINT16(base+_REG_SCSSR, sr);
HAL_WRITE_UINT16(base+_REG_SCSSR, CYGARC_REG_SCIF_SCSSR_CLEARMASK
& ~(CYGARC_REG_SCIF_SCSSR_TDFE | CYGARC_REG_SCIF_SCSSR_TEND ));
// Hang around until all characters have been safely sent.
do {
HAL_READ_UINT16(base+_REG_SCSSR, sr);
} while ((sr & CYGARC_REG_SCIF_SCSSR_TEND) == 0);
if (chan->irda_mode) {
#ifdef CYGHWR_HAL_SH_SH2_SCIF_IRDA_TXRX_COMPENSATION
// In IrDA mode there will be generated spurious RX events when
// the TX unit is switched on. Eat that character.
cyg_uint8 _junk;
HAL_READ_UINT8(base+_REG_SCFRDR, _junk);
// Clear buffer full flag (read back first)
HAL_READ_UINT16(base+_REG_SCSSR, sr);
HAL_WRITE_UINT16(base+_REG_SCSSR,
CYGARC_REG_SCIF_SCSSR_CLEARMASK & ~(CYGARC_REG_SCIF_SCSSR_RDF|CYGARC_REG_SCIF_SCSSR_DR));
#endif // CYGHWR_HAL_SH_SH2_SCIF_IRDA_TXRX_COMPENSATION
// Disable transmitter again
HAL_WRITE_UINT8(base+_REG_SCSCR, scscr);
}
#ifdef CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX
if (chan->async_rxtx_mode) {
// Disable transmitter, enable receiver
HAL_WRITE_UINT8(base+_REG_SCSCR, scscr);
}
#endif // CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX
CYGARC_HAL_RESTORE_GP();
}
开发者ID:EPiCS，项目名称:reconos_v2，代码行数:60，代码来源:sh2_scif.c
示例10: cyg_hal_plf_serial_isr
static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc,
CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
int res = 0;
cyg_uint8 _iir, c;
channel_data_t* chan;
CYGARC_HAL_SAVE_GP();
// Some of the diagnostic print code calls through here with no idea what the ch_data is.
// Go ahead and assume it is channels[0].
if (__ch_data == 0)
__ch_data = (void*)&channels[0];
chan = (channel_data_t*)__ch_data;
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
HAL_READ_UINT8(chan->base + SER_16550_IIR, _iir);
_iir &= SIO_IIR_ID_MASK;
*__ctrlc = 0;
if ((_iir == ISR_Rx_Avail) || (_iir == ISR_Rx_Char_Timeout)) {
HAL_READ_UINT8(chan->base + SER_16550_RBR, c);
if( cyg_hal_is_break( &c , 1 ) )
*__ctrlc = 1;
res = CYG_ISR_HANDLED;
}
CYGARC_HAL_RESTORE_GP();
return res;
}
开发者ID:houzhenggang，项目名称:mt7688_mips_ecos，代码行数:35，代码来源:ser16c550c.c
示例11: cyg_hal_plf_serial_putc
void
cyg_hal_plf_serial_putc(void* __ch_data, cyg_uint8 __ch)
{
cyg_uint8* port;
cyg_uint8 _lsr;
// Some of the diagnostic print code calls through here with no idea what the ch_data is.
// Go ahead and assume it is channels[0].
if (__ch_data == 0)
__ch_data = (void*)&channels[0];
port = ((channel_data_t*)__ch_data)->base;
CYGARC_HAL_SAVE_GP();
do {
HAL_READ_UINT8(port+SER_16550_LSR, _lsr);
} while ((_lsr & SIO_LSR_THRE) == 0);
// Now, the transmit buffer is empty
HAL_WRITE_UINT8(port+SER_16550_THR, __ch);
// Hang around until the character has been safely sent.
do {
HAL_READ_UINT8(port+SER_16550_LSR, _lsr);
} while ((_lsr & SIO_LSR_THRE) == 0);
CYGARC_HAL_RESTORE_GP();
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:29，代码来源:hal_diag.c
示例12: cyg_hal_plf_serial_init_channel
void
cyg_hal_plf_serial_init_channel(void* __ch_data)
{
cyg_uint8 port;
cyg_uint8 value;
port = ((channel_data_t*)__ch_data)->base;
// set the port direction and function registers to serial
switch (port){
case CYG_HAL_FR30_MB91301_SER0_BASE:
HAL_READ_UINT8(CYG_HAL_FR30_MB91301_DDRJ, value);
value |= 0x6;
value &= ~0x1;
HAL_WRITE_UINT8(CYG_HAL_FR30_MB91301_DDRJ, value);
HAL_READ_UINT8(CYG_HAL_FR30_MB91301_PFRJ, value);
HAL_WRITE_UINT8(CYG_HAL_FR30_MB91301_PFRJ, value | 0x7);
if (CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0){
cyg_hal_plf_serial_set_baudrate_internal(port, CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD);
} else {
cyg_hal_plf_serial_set_baudrate_internal(port, CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD);
}
break;
case CYG_HAL_FR30_MB91301_SER1_BASE:
HAL_READ_UINT8(CYG_HAL_FR30_MB91301_DDRJ, value);
value |= 0x30;
value &= ~0x8;
HAL_WRITE_UINT8(CYG_HAL_FR30_MB91301_DDRJ, value);
HAL_READ_UINT8(CYG_HAL_FR30_MB91301_PFRJ, value);
HAL_WRITE_UINT8(CYG_HAL_FR30_MB91301_PFRJ, value | 0x38);
if (CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 1){
cyg_hal_plf_serial_set_baudrate_internal(port, CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD);
} else {
cyg_hal_plf_serial_set_baudrate_internal(port, CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD);
}
break;
/*
case CYG_HAL_FR30_MB91301_SER2_BASE:
HAL_READ_UINT8(CYG_HAL_FR30_MB91301_DDRG, value);
HAL_WRITE_UINT8(CYG_HAL_FR30_MB91301_DDRG, value | 0x40);
HAL_READ_UINT8(CYG_HAL_FR30_MB91301_PFRG, value);
HAL_WRITE_UINT8(CYG_HAL_FR30_MB91301_PFRG, value | 0x60);
break;
*/
}
// set up U-Timer
/* HAL_WRITE_UINT8(port + CYG_HAL_FR30_MB91301_UTIMC_OFFSET, 0x02);
// 115200 bps
HAL_WRITE_UINT16(port + CYG_HAL_FR30_MB91301_UTIMR_OFFSET, 0x7);
cyg_hal_plf_serial_set_baudrate_internal(port, baudrate);
*/
// setup UART
HAL_WRITE_UINT8(port + CYG_HAL_FR30_MB91301_SCR_OFFSET, 0x13);
HAL_WRITE_UINT8(port + CYG_HAL_FR30_MB91301_SMR_OFFSET, 0x30);
}
开发者ID:KarenHung，项目名称:ecosgit，代码行数:58，代码来源:ser.c
示例13: cyg_hal_plf_serial_control
static int CYGOPT_HAL_KINETIS_DIAG_FLASH_SECTION_ATTR
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
channel_data_t* chan = (channel_data_t*)__ch_data;
CYG_ADDRESS uart_p = ((channel_data_t*)__ch_data)->base;
cyg_uint8 ser_port_reg;
int ret = 0;
va_list ap;
CYGARC_HAL_SAVE_GP();
va_start(ap, __func);
switch (__func) {
case __COMMCTL_IRQ_ENABLE:
chan->irq_state = 1;
HAL_INTERRUPT_ACKNOWLEDGE(chan->isr_vector);
HAL_INTERRUPT_UNMASK(chan->isr_vector);
HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
ser_port_reg |= CYGHWR_DEV_FREESCALE_UART_C2_RIE;
HAL_WRITE_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
break;
case __COMMCTL_IRQ_DISABLE:
ret = chan->irq_state;
chan->irq_state = 0;
HAL_INTERRUPT_MASK(chan->isr_vector);
HAL_READ_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
ser_port_reg &= ~(cyg_uint8)CYGHWR_DEV_FREESCALE_UART_C2_RIE;
HAL_WRITE_UINT8(uart_p + CYGHWR_DEV_FREESCALE_UART_C2, ser_port_reg);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->isr_vector;
break;
case __COMMCTL_SET_TIMEOUT:
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
case __COMMCTL_GETBAUD:
ret = chan->baud_rate;
break;
case __COMMCTL_SETBAUD:
chan->baud_rate = va_arg(ap, cyg_int32);
// Should we verify this value here?
cyg_hal_plf_serial_init_channel(chan);
ret = 0;
break;
default:
break;
}
va_end(ap);
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:benchfox，项目名称:ecos，代码行数:55，代码来源:hal_diag.c
示例14: hal_ppc405_i2c_put_bytes
externC bool
hal_ppc405_i2c_put_bytes(int addr, cyg_uint8 *val, int len)
{
cyg_uint8 stat, extstat, xfrcnt, cmd, size;
int i, j;
// The hardware can only move up to 4 bytes in a single operation
// This code breaks the request down into chunks of up to 4 bytes
// and checks the status after each chunk.
// Note: the actual device may impose additional size restrictions,
// e.g. some EEPROM devices may limit a single write to 32 bytes.
for (i = 0; i < len; i += size) {
HAL_WRITE_UINT8(IIC0_STS, (IIC0_STS_SCMP|IIC0_STS_IRQA));
HAL_WRITE_UINT8(IIC0_EXTSTS, (IIC0_EXTSTS_IRQP|IIC0_EXTSTS_IRQD));
HAL_WRITE_UINT8(IIC0_MDCNTL, (IIC0_MDCNTL_FSDB|IIC0_MDCNTL_FMDB));
cmd = IIC0_CNTL_RW_WRITE|IIC0_CNTL_PT;
size = (len - i);
if (size > 4) {
size = 4;
cmd |= IIC0_CNTL_CHT;
}
cmd |= ((size-1)<<IIC0_CNTL_TCT_SHIFT);
for (j = 0; j < size; j++) {
HAL_WRITE_UINT8(IIC0_MDBUF, val[i+j]);
}
HAL_WRITE_UINT8(IIC0_LMADR, addr);
HAL_WRITE_UINT8(IIC0_CNTL, cmd);
while (true) {
CYGACC_CALL_IF_DELAY_US(10); // 10us
HAL_READ_UINT8(IIC0_STS, stat);
if ((stat & IIC0_STS_PT) == 0) {
if ((stat & IIC0_STS_ERR) != 0) {
// Some sort of error
HAL_READ_UINT8(IIC0_EXTSTS, extstat);
HAL_READ_UINT8(IIC0_XFRCNT, xfrcnt);
HAL_WRITE_UINT8(IIC0_EXTSTS, extstat);
HAL_WRITE_UINT8(IIC0_MDCNTL, (IIC0_MDCNTL_FSDB|IIC0_MDCNTL_FMDB));
HAL_WRITE_UINT8(IIC0_STS, (IIC0_STS_SCMP|IIC0_STS_IRQA));
diag_printf("%s addr: %x, len: %d, err: %x/%x, count: %d, cmd: %x\n",
__FUNCTION__, addr, len, stat, extstat, xfrcnt, cmd);
diag_printf("buf: ");
for (j = 0; j < size; j++) {
diag_printf("0x%02x ", val[i+j]);
}
diag_printf("\n");
return false;
}
break;
}
}
}
return true;
}
开发者ID:janfj，项目名称:dd-wrt，代码行数:53，代码来源:var_misc.c
示例15: cyg_hal_plf_serial_control
static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
static int irq_state = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
int ret = -1;
cyg_uint8 ier;
va_list ap;
CYGARC_HAL_SAVE_GP();
va_start(ap, __func);
switch (__func) {
case __COMMCTL_GETBAUD:
ret = chan->baud_rate;
break;
case __COMMCTL_SETBAUD:
chan->baud_rate = va_arg(ap, cyg_int32);
// Should we verify this value here?
init_channel(chan);
ret = 0;
break;
case __COMMCTL_IRQ_ENABLE:
HAL_INTERRUPT_UNMASK(chan->isr_vector);
HAL_INTERRUPT_SET_LEVEL(chan->isr_vector, 1);
HAL_READ_UINT8(chan->base+PXA2X0_UART_IER, ier);
ier |= PXA2X0_UART_IER_RAVIE;
HAL_WRITE_UINT8(chan->base+PXA2X0_UART_IER, ier);
irq_state = 1;
break;
case __COMMCTL_IRQ_DISABLE:
ret = irq_state;
irq_state = 0;
HAL_INTERRUPT_MASK(chan->isr_vector);
HAL_READ_UINT8(chan->base+PXA2X0_UART_IER, ier);
ier &= ~PXA2X0_UART_IER_RAVIE;
HAL_WRITE_UINT8(chan->base+PXA2X0_UART_IER, ier);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->isr_vector;
break;
case __COMMCTL_SET_TIMEOUT:
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
break;
default:
break;
}
va_end(ap);
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:52，代码来源:hal_diag.c
示例16: hal_interrupt_status
void hal_interrupt_status(void)
{
int irq_status, irq_enable, ipr_value, timer_value;
cyg_uint8 reg;
HAL_READ_UINT8(CYG_DEVICE_TIMER0, reg); // LSB
timer_value = reg;
HAL_READ_UINT8(CYG_DEVICE_TIMER0, reg); // MSB
timer_value |= (reg << 8);
HAL_READ_UINT32(CYG_DEVICE_ICTL_IRQSR, irq_status);
HAL_READ_UINT32(CYG_DEVICE_ICTL_IRQER, irq_enable);
HAL_READ_UINT32(CYG_DEVICE_ICTL_IPR, ipr_value);
diag_printf("Interrupt: IRQ: %x.%x.%x, Timer: %x\n", irq_status,
irq_enable, ipr_value, timer_value);
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:14，代码来源:aeb_misc.c
示例17: mipsidt_serial_getc
// Fetch a character from the device input buffer, waiting if necessary
static unsigned char
mipsidt_serial_getc(serial_channel *chan)
{
unsigned char c;
mipsidt_serial_info *mipsidt_chan = (mipsidt_serial_info *)chan->dev_priv;
cyg_addrword_t port = mipsidt_chan->base;
cyg_uint8 _lsr;
do {
HAL_READ_UINT8(port+SER_16550_LSR, _lsr);
} while ((_lsr & SIO_LSR_DR) == 0);
HAL_READ_UINT8(port+SER_16550_RBR, c);
return c;
}
开发者ID:axonim，项目名称:ecos-ax-som-bf609，代码行数:15，代码来源:mipsidt_serial.c
示例18: cyg_hal_plf_serial_getc_nonblock
static cyg_bool
cyg_hal_plf_serial_getc_nonblock(void* __ch_data, cyg_uint8* ch)
{
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
cyg_uint8 lsr;
HAL_READ_UINT8(base+PXA2X0_UART_LSR, lsr);
if ((lsr & PXA2X0_UART_LSR_DR) == 0)
return false;
HAL_READ_UINT8(base+PXA2X0_UART_RBR, *ch);
return true;
}
开发者ID:lijinlei，项目名称:Kernel_BOOX60，代码行数:14，代码来源:hal_diag.c
示例19: cyg_hal_plf_serial_getc_nonblock
static cyg_bool
cyg_hal_plf_serial_getc_nonblock(void* __ch_data, cyg_uint8* ch)
{
cyg_uint8* base = ((channel_data_t*)__ch_data)->base;
cyg_uint8 lsr;
HAL_READ_UINT8(base+CYG_DEVICE_BK0_LSR, lsr);
if ((lsr & CYG_DEVICE_BK0_LSR_RXDA) == 0)
return false;
HAL_READ_UINT8 (base+CYG_DEVICE_BK0_RXD, *ch);
return true;
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:14，代码来源:pc87338.c
示例20: cyg_hal_plf_serial_control
static int
cyg_hal_plf_serial_control(void *__ch_data, __comm_control_cmd_t __func, ...)
{
static int irq_state = 0;
channel_data_t* chan = (channel_data_t*)__ch_data;
cyg_uint8 ier;
int ret = 0;
CYGARC_HAL_SAVE_GP();
switch (__func) {
case __COMMCTL_IRQ_ENABLE:
irq_state = 1;
HAL_READ_UINT8(chan->base+CYG_DEVICE_BK0_IER, ier);
ier |= CYG_DEVICE_BK0_IER_RXHDL_IE;
HAL_WRITE_UINT8(chan->base+CYG_DEVICE_BK0_IER, ier);
HAL_INTERRUPT_SET_LEVEL(chan->isr_vector, 1);
HAL_INTERRUPT_UNMASK(chan->isr_vector);
break;
case __COMMCTL_IRQ_DISABLE:
ret = irq_state;
irq_state = 0;
HAL_READ_UINT8(chan->base+CYG_DEVICE_BK0_IER, ier);
ier &= ~CYG_DEVICE_BK0_IER_RXHDL_IE;
HAL_WRITE_UINT8(chan->base+CYG_DEVICE_BK0_IER, ier);
HAL_INTERRUPT_MASK(chan->isr_vector);
break;
case __COMMCTL_DBG_ISR_VECTOR:
ret = chan->isr_vector;
break;
case __COMMCTL_SET_TIMEOUT:
{
va_list ap;
va_start(ap, __func);
ret = chan->msec_timeout;
chan->msec_timeout = va_arg(ap, cyg_uint32);
va_end(ap);
}
default:
break;
}
CYGARC_HAL_RESTORE_GP();
return ret;
}
开发者ID:0xCA5A，项目名称:dd-wrt，代码行数:50，代码来源:pc87338.c
注：本文中的HAL_READ_UINT8函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论