C++ XnDeviceModuleHolder类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中XnDeviceModuleHolder类的典型用法代码示例。如果您正苦于以下问题：C++ XnDeviceModuleHolder类的具体用法？C++ XnDeviceModuleHolder怎么用？C++ XnDeviceModuleHolder使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了XnDeviceModuleHolder类的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: xnLogVerbose

XnStatus XnDeviceBase::OpenAllStreams()
{
    XnStatus nRetVal = XN_STATUS_OK;

    xnLogVerbose(XN_MASK_DDK, "Opening all streams...");

    // go over modules list, and look for closed streams
    for (ModuleHoldersHash::Iterator it = m_Modules.Begin(); it != m_Modules.End(); ++it)
    {
        XnDeviceModuleHolder* pModuleHolder = it->Value();
        if (IsStream(pModuleHolder->GetModule()))
        {
            XnDeviceStream* pStream = (XnDeviceStream*)pModuleHolder->GetModule();
            if (!pStream->IsOpen())
            {
                nRetVal = pStream->Open();
                XN_IS_STATUS_OK(nRetVal);
            }
        }
    }

    xnLogInfo(XN_MASK_DDK, "All streams are open.");

    return XN_STATUS_OK;
}

开发者ID:higuchi-yuuki，项目名称:OpenNI2，代码行数:25，代码来源:XnDeviceBase.cpp

示例2: xnLogVerbose

XnStatus XnDeviceBase::CloseAllStreams()
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnLogVerbose(XN_MASK_DDK, "Closing all streams...");

	// go over modules list, and look for closed streams
	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			XnDeviceStream* pStream = (XnDeviceStream*)pModuleHolder->GetModule();
			if (pStream->IsOpen())
			{
				nRetVal = pStream->Close();
				XN_IS_STATUS_OK(nRetVal);
			}
		}
	}

	xnLogInfo(XN_MASK_DDK, "All streams are closed.");

	return XN_STATUS_OK;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:25，代码来源:XnDeviceBase.cpp

示例3: FindStream

XnStatus XnDeviceBase::FindStream(const XnChar* StreamName, XnDeviceStream** ppStream)
{
	// find the module
	XnDeviceModuleHolder* pStreamHolder = NULL;
	XnStatus nRetVal = FindStream(StreamName, &pStreamHolder);
	XN_IS_STATUS_OK(nRetVal);

	*ppStream = (XnDeviceStream*)pStreamHolder->GetModule();

	return XN_STATUS_OK;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:11，代码来源:XnDeviceBase.cpp

示例4: FindModule

XnStatus XnDeviceBase::FindModule(const XnChar* ModuleName, XnDeviceModule** ppModule)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	XnDeviceModuleHolder* pHolder;
	nRetVal = FindModule(ModuleName, &pHolder);
	XN_IS_STATUS_OK(nRetVal);

	*ppModule = pHolder->GetModule();
	
	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:12，代码来源:XnDeviceBase.cpp

示例5: GetStreamsList

XnStatus XnDeviceBase::GetStreamsList(XnDeviceModuleHolderList& list)
{
	list.Clear();

	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			list.AddLast(pModuleHolder);
		}
	}

	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:15，代码来源:XnDeviceBase.cpp

示例6: XN_VALIDATE_INPUT_PTR

XnStatus XnSensor::LoadConfigFromFile(const XnChar* csINIFilePath, const XnChar* csSectionName)
{
	XnStatus nRetVal = XN_STATUS_OK;

	XN_VALIDATE_INPUT_PTR(csINIFilePath);
	XN_VALIDATE_INPUT_PTR(csSectionName);

	// we first need to configure the USB interface (we want to do so BEFORE creating streams)
	nRetVal = m_Interface.ReadValueFromFile(csINIFilePath, XN_MODULE_NAME_DEVICE);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_NumberOfBuffers.ReadValueFromFile(csINIFilePath, XN_MODULE_NAME_DEVICE);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_ReadFromEP1.ReadValueFromFile(csINIFilePath, XN_MODULE_NAME_DEVICE);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_ReadFromEP2.ReadValueFromFile(csINIFilePath, XN_MODULE_NAME_DEVICE);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_ReadFromEP3.ReadValueFromFile(csINIFilePath, XN_MODULE_NAME_DEVICE);
	XN_IS_STATUS_OK(nRetVal);

	// now create all streams
	nRetVal = CreateStreamsFromFile(csINIFilePath, csSectionName);
	XN_IS_STATUS_OK(nRetVal);

	// now configure DEVICE module (primary stream, global mirror, etc.)
	nRetVal = DeviceModule()->LoadConfigFromFile(csINIFilePath, XN_MODULE_NAME_DEVICE);
	XN_IS_STATUS_OK(nRetVal);

	// and now configure the streams
	XnDeviceModuleHolderList streams;
	nRetVal = GetStreamsList(streams);
	XN_IS_STATUS_OK(nRetVal);

	for (XnDeviceModuleHolderList::Iterator it = streams.begin(); it != streams.end(); ++it)
	{
		XnDeviceModuleHolder* pHolder = *it;
		nRetVal = pHolder->GetModule()->LoadConfigFromFile(csINIFilePath);
		XN_IS_STATUS_OK(nRetVal);
	}

	return (XN_STATUS_OK);
}

开发者ID:AlpinistPanda，项目名称:SensorKinect，代码行数:45，代码来源:XnSensor.cpp

示例7: while

XnStatus XnDeviceBase::Destroy()
{
    XnStatus nRetVal = XN_STATUS_OK;

    // free all modules
    while (m_Modules.Size() != 0)
    {
        XnDeviceModuleHolder* pModuleHolder = m_Modules.Begin()->Value();
        if (IsStream(pModuleHolder->GetModule()))
        {
            XnChar strName[XN_DEVICE_MAX_STRING_LENGTH];
            strcpy(strName, pModuleHolder->GetModule()->GetName());
            nRetVal = DestroyStream(strName);
            XN_IS_STATUS_OK(nRetVal);
        }
        else
        {
            // free memory of registered properties to this module
            FreeModuleRegisteredProperties(m_Modules.Begin()->Key());

            pModuleHolder->GetModule()->Free();
            DestroyModule(pModuleHolder);
            m_Modules.Remove(m_Modules.Begin());
        }
    }

    m_pDevicePropertiesHolder = NULL;

    m_Modules.Clear();

    // close dump
    xnDumpFileClose(m_StreamsDataDump);

    if (m_hLock != NULL)
    {
        xnOSCloseCriticalSection(&m_hLock);
        m_hLock = NULL;
    }

    return XN_STATUS_OK;
}

开发者ID:higuchi-yuuki，项目名称:OpenNI2，代码行数:41，代码来源:XnDeviceBase.cpp

示例8: xnLogInfo

XnStatus XnDeviceBase::DestroyStream(const XnChar* StreamName)
{
    XnStatus nRetVal = XN_STATUS_OK;

    xnLogInfo(XN_MASK_DDK, "Destroying stream '%s'...", StreamName);

    // keep the stream name (we now delete the module, so the name will be lost)
    XnChar strStreamName[XN_DEVICE_MAX_STRING_LENGTH];
    strncpy(strStreamName, StreamName, XN_DEVICE_MAX_STRING_LENGTH);

    xnl::AutoCSLocker lock(m_hLock);

    // Find the stream
    XnDeviceModuleHolder* pStreamHolder;
    nRetVal = FindStream(strStreamName, &pStreamHolder);
    XN_IS_STATUS_OK(nRetVal);

    XnDeviceStream* pStream = (XnDeviceStream*)pStreamHolder->GetModule();
    XnUInt32 nRefCount = pStream->DecRef();
    if (0 == nRefCount)
    {
        // remove it from map
        nRetVal = RemoveModule(strStreamName);
        XN_IS_STATUS_OK(nRetVal);

        // and free it's memory
        DestroyStreamModule(pStreamHolder);

        // free memory of registered properties to this stream
        FreeModuleRegisteredProperties(StreamName);

        xnLogVerbose(XN_MASK_DDK, "'%s' stream destroyed.", strStreamName);
    }
    else
    {
        xnLogVerbose(XN_MASK_DDK, "'%s' stream now has %d references.", strStreamName, nRefCount);
    }

    return XN_STATUS_OK;
}

开发者ID:higuchi-yuuki，项目名称:OpenNI2，代码行数:40，代码来源:XnDeviceBase.cpp

示例9: SetMirror

XnStatus XnDeviceBase::SetMirror(XnBool bMirror)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	// change all streams
	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			XnDeviceStream* pStream = (XnDeviceStream*)pModuleHolder->GetModule();
			nRetVal = pStream->SetMirror(bMirror);
			XN_IS_STATUS_OK(nRetVal);
		}
	}

	// and set property
	nRetVal = m_DeviceMirror.UnsafeUpdateValue(bMirror);
	XN_IS_STATUS_OK(nRetVal);
	
	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:22，代码来源:XnDeviceBase.cpp

示例10: GetStreamNames

XnStatus XnDeviceBase::GetStreamNames(const XnChar** pstrNames, XnUInt32* pnNamesCount)
{
	// first we need to count them
	XnUInt32 nCount = 0;

	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			nCount++;
		}
	}

	if (nCount > *pnNamesCount)
	{
		*pnNamesCount = nCount;
		return XN_STATUS_OUTPUT_BUFFER_OVERFLOW;
	}

	// OK. we have enough space. Copy into it
	nCount = 0;
	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			pstrNames[nCount] = it.Key();
			nCount++;
		}
	}

	*pnNamesCount = nCount;

	return XN_STATUS_OK;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:36，代码来源:XnDeviceBase.cpp

示例11: XN_VALIDATE_INPUT_PTR

XnStatus XnDeviceBase::GetAllProperties(XnPropertySet* pSet, XnBool bNoStreams /* = FALSE */, const XnChar* strModule /* = NULL */)
{
	XnStatus nRetVal = XN_STATUS_OK;

	XN_VALIDATE_INPUT_PTR(pSet);

	// clear the set
	nRetVal = XnPropertySetClear(pSet);
	XN_IS_STATUS_OK(nRetVal);

	if (strModule != NULL)
	{
		XnDeviceModule* pModule;
		nRetVal = FindModule(strModule, &pModule);
		XN_IS_STATUS_OK(nRetVal);

		nRetVal = pModule->GetAllProperties(pSet);
		XN_IS_STATUS_OK(nRetVal);
	}
	else
	{
		// enumerate over modules
		for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
		{
			XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();

			if (bNoStreams && IsStream(pModuleHolder->GetModule()))
				continue;

			nRetVal = pModuleHolder->GetModule()->GetAllProperties(pSet);
			XN_IS_STATUS_OK(nRetVal);
		}
	}

	return XN_STATUS_OK;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:36，代码来源:XnDeviceBase.cpp

示例12: GetIOStream

XnStatus XnDeviceFileReader::Rewind()
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	// go back to start of stream
	nRetVal = GetIOStream()->Seek(XN_DEVICE_FILE_MAGIC_LEN);
	XN_IS_STATUS_OK(nRetVal);

	// read initial state
	XN_PROPERTY_SET_CREATE_ON_STACK(state);
	nRetVal = ReadInitialState(&state);
	XN_IS_STATUS_OK(nRetVal);

	// first handle current streams. remove or reset them
	XnDeviceModuleHolderList streams;
	nRetVal = GetStreamsList(streams);
	XN_IS_STATUS_OK(nRetVal);

	for (XnDeviceModuleHolderList::Iterator it = streams.Begin(); it != streams.End(); ++it)
	{
		XnDeviceModuleHolder* pHolder = *it;

		if (m_bStreamsCollectionChanged)
		{
			// we need to destroy all streams, and recreate them later
			nRetVal = DestroyStream(pHolder->GetModule()->GetName());
			XN_IS_STATUS_OK(nRetVal);
		}
		else
		{
			// just reset frame ID
			XnStreamReaderStream* pStream = (XnStreamReaderStream*)pHolder->GetModule();
			pStream->Reset();
		}
	}

	// if we need, recreate streams
	if (m_bStreamsCollectionChanged)
	{
		nRetVal = CreateStreams(&state);
		XN_IS_STATUS_OK(nRetVal);
	}

	// now set state.
	for (XnPropertySetData::Iterator it = state.pData->Begin(); it != state.pData->End(); ++it)
	{
		const XnChar* strName = it->Key();
		XnActualPropertiesHash* pHash = it->Value();

		// fix it first
		if (strcmp(strName, XN_MODULE_NAME_DEVICE) == 0)
		{
			pHash->Remove(XN_MODULE_PROPERTY_READ_WRITE_MODE);
			pHash->Remove(XN_MODULE_PROPERTY_PRIMARY_STREAM);
		}

		XnDeviceModule* pModule;
		nRetVal = FindModule(strName, &pModule);
		XN_IS_STATUS_OK(nRetVal);

		nRetVal = pModule->UnsafeBatchConfig(*pHash);
		XN_IS_STATUS_OK(nRetVal);
	}

	ResetLastTimestampAndFrame();
	m_nReferenceTimestamp = 0;
	m_nReferenceTime = 0;
	m_bStreamsCollectionChanged = FALSE;

	return (XN_STATUS_OK);
}

开发者ID:RikeshThapa，项目名称:VirtueX，代码行数:71，代码来源:XnDeviceFileReader.cpp

示例13: XN_IS_STATUS_OK

XnStatus XnStreamReaderDevice::SetInitialState(const XnDeviceConfig* pDeviceConfig, XnPropertySet* pSet)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	// Fix state (remove some properties that we don't wish to reflect in reader device)
	XnActualPropertiesHash* pDeviceModule = NULL;
	if (XN_STATUS_OK == pSet->pData->Get(XN_MODULE_NAME_DEVICE, pDeviceModule))
	{
		pDeviceModule->Remove(XN_MODULE_PROPERTY_READ_WRITE_MODE);
		pDeviceModule->Remove(XN_MODULE_PROPERTY_PRIMARY_STREAM);
	}

	// now init base using this state (this will also create module DEVICE)
	XnDeviceConfig initConfig;
	initConfig.cpConnectionString = pDeviceConfig->cpConnectionString;
	initConfig.DeviceMode = pDeviceConfig->DeviceMode;
	initConfig.pInitialValues = pSet;
	initConfig.SharingMode = pDeviceConfig->SharingMode;

	nRetVal = XnStreamDevice::InitImpl(&initConfig);
	XN_IS_STATUS_OK(nRetVal);

	// now create the rest of the modules and streams (DEVICE was already created)
	XnPropertySetData* pPropSetData = pSet->pData;
	for (XnPropertySetData::ConstIterator it = pPropSetData->begin(); it != pPropSetData->end(); ++it)
	{
		// ignore module DEVICE
		if (strcmp(XN_MODULE_NAME_DEVICE, it.Key()) == 0)
		{
			continue;
		}

		// check if this is a stream
		XnActualPropertiesHash::ConstIterator itProp = it.Value()->end();
		if (XN_STATUS_OK == it.Value()->Find(XN_STREAM_PROPERTY_TYPE, itProp))
		{
			XnActualStringProperty* pTypeProp = (XnActualStringProperty*)itProp.Value();
			nRetVal = HandleNewStream(pTypeProp->GetValue(), it.Key(), it.Value());
			XN_IS_STATUS_OK(nRetVal);
		}
		else
		{
			// this is module. create it
			XnDeviceModuleHolder* pHolder = NULL;
			nRetVal = CreateModule(it.Key(), &pHolder);
			XN_IS_STATUS_OK(nRetVal);

			// set its props
			nRetVal = pHolder->Init(it.Value());
			if (nRetVal != XN_STATUS_OK)
			{
				DestroyModule(pHolder);
				return (nRetVal);
			}

			// and add it
			nRetVal = AddModule(pHolder);
			if (nRetVal != XN_STATUS_OK)
			{
				DestroyModule(pHolder);
				return (nRetVal);
			}
		}
	} // modules loop
	
	return (XN_STATUS_OK);
}

开发者ID:linjason，项目名称:Scene-Matching，代码行数:67，代码来源:XnStreamReaderDevice.cpp

示例14: xnLogInfo

XnStatus XnDeviceBase::CreateStreamImpl(const XnChar* strType, const XnChar* strName, const XnActualPropertiesHash* pInitialSet)
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnLogInfo(XN_MASK_DDK, "Creating stream '%s' of type '%s'...", strName, strType);

	XnDeviceModule* pModule;
	if (FindModule(strName, &pModule) == XN_STATUS_OK)
	{
		// already exists. check sharing mode (when shared, we allow "creating" the same stream)
		if (GetSharingMode() != XN_DEVICE_SHARED ||
			!IsStream(pModule) ||
			strcmp(strType, ((XnDeviceStream*)pModule)->GetType()) != 0)
		{
			XN_LOG_WARNING_RETURN(XN_STATUS_STREAM_ALREADY_EXISTS, XN_MASK_DDK, "A stream with this name already exists!");
		}

		// OK, we'll allow this. Just set new configuration
		if (pInitialSet != NULL)
		{
			nRetVal = pModule->BatchConfig(*pInitialSet);
			XN_IS_STATUS_OK(nRetVal);
		}
	}
	else
	{
		// create stream
		XnDeviceModuleHolder* pNewStreamHolder = NULL;

		nRetVal = CreateStreamModule(strType, strName, &pNewStreamHolder);
		XN_IS_STATUS_OK(nRetVal);

		XnDeviceStream* pNewStream = (XnDeviceStream*)(pNewStreamHolder->GetModule());
		if (pNewStream == NULL)
		{
			DestroyStreamModule(pNewStreamHolder);
			XN_LOG_ERROR_RETURN(XN_STATUS_ERROR, XN_MASK_DDK, "Internal Error: Invalid new stream!");
		}

		// initialize the stream
		xnLogVerbose(XN_MASK_DDK, "Initializing stream '%s'...", strName);

		nRetVal = pNewStreamHolder->Init(pInitialSet);
		if (nRetVal != XN_STATUS_OK)
		{
			DestroyStreamModule(pNewStreamHolder);
			return (nRetVal);
		}

		// set it's mirror value (if not requested otherwise)
		XnBool bSetMirror = TRUE;

		if (pInitialSet != NULL)
		{
			XnActualPropertiesHash::ConstIterator it = pInitialSet->end();
			if (XN_STATUS_OK == pInitialSet->Find(XN_MODULE_PROPERTY_MIRROR, it))
			{
				bSetMirror = FALSE;
			}
		}

		if (bSetMirror)
		{
			nRetVal = pNewStream->SetMirror((XnBool)m_DeviceMirror.GetValue());
			if (nRetVal != XN_STATUS_OK)
			{
				DestroyStreamModule(pNewStreamHolder);
				return (nRetVal);
			}
		}

		// add it to the list of existing modules
		nRetVal = AddModule(pNewStreamHolder);
		if (nRetVal != XN_STATUS_OK)
		{
			DestroyStreamModule(pNewStreamHolder);
			return (nRetVal);
		}

		xnLogInfo(XN_MASK_DDK, "Stream '%s' was initialized.", strName);

		nRetVal = StreamAdded(pNewStream);
		XN_IS_STATUS_OK(nRetVal);

		xnLogInfo(XN_MASK_DDK, "'%s' stream was created.", strName);
	}

	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:89，代码来源:XnDeviceBase.cpp

注：本文中的XnDeviceModuleHolder类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ XnDeviceStream类代码示例发布时间：2022-05-31

C++ XnDeviceModule类代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ XnDeviceModuleHolder类代码示例

示例1: xnLogVerbose

示例2: xnLogVerbose

示例3: FindStream

示例4: FindModule

示例5: GetStreamsList

示例6: XN_VALIDATE_INPUT_PTR

示例7: while

示例8: xnLogInfo

示例9: SetMirror

示例10: GetStreamNames

示例11: XN_VALIDATE_INPUT_PTR

示例12: GetIOStream

示例13: XN_IS_STATUS_OK

示例14: xnLogInfo

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

CVE-2022-29834

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053