C++ XnDeviceStream类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中XnDeviceStream类的典型用法代码示例。如果您正苦于以下问题：C++ XnDeviceStream类的具体用法？C++ XnDeviceStream怎么用？C++ XnDeviceStream使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了XnDeviceStream类的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: xnLogVerbose

XnStatus XnDeviceBase::CloseAllStreams()
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnLogVerbose(XN_MASK_DDK, "Closing all streams...");

	// go over modules list, and look for closed streams
	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			XnDeviceStream* pStream = (XnDeviceStream*)pModuleHolder->GetModule();
			if (pStream->IsOpen())
			{
				nRetVal = pStream->Close();
				XN_IS_STATUS_OK(nRetVal);
			}
		}
	}

	xnLogInfo(XN_MASK_DDK, "All streams are closed.");

	return XN_STATUS_OK;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:25，代码来源:XnDeviceBase.cpp

示例2: xnLogVerbose

XnStatus XnDeviceBase::OpenAllStreams()
{
    XnStatus nRetVal = XN_STATUS_OK;

    xnLogVerbose(XN_MASK_DDK, "Opening all streams...");

    // go over modules list, and look for closed streams
    for (ModuleHoldersHash::Iterator it = m_Modules.Begin(); it != m_Modules.End(); ++it)
    {
        XnDeviceModuleHolder* pModuleHolder = it->Value();
        if (IsStream(pModuleHolder->GetModule()))
        {
            XnDeviceStream* pStream = (XnDeviceStream*)pModuleHolder->GetModule();
            if (!pStream->IsOpen())
            {
                nRetVal = pStream->Open();
                XN_IS_STATUS_OK(nRetVal);
            }
        }
    }

    xnLogInfo(XN_MASK_DDK, "All streams are open.");

    return XN_STATUS_OK;
}

开发者ID:higuchi-yuuki，项目名称:OpenNI2，代码行数:25，代码来源:XnDeviceBase.cpp

示例3: XN_VALIDATE_INPUT_PTR

XnStatus XnDeviceBase::WriteStream(XnStreamData* pStreamData)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	XN_VALIDATE_INPUT_PTR(pStreamData);

	if (m_ReadWriteMode.GetValue() != XN_DEVICE_MODE_WRITE)
	{
		return XN_STATUS_IO_DEVICE_WRONG_MODE;
	}

	// take the stream to write
	XnDeviceStream* pStream;
	nRetVal = FindStream(pStreamData->StreamName, &pStream);
	XN_IS_STATUS_OK(nRetVal);

	// make sure it is open
	if (!pStream->IsOpen())
	{
		return XN_STATUS_STREAM_NOT_OPEN;
	}

	// and write
	nRetVal = pStream->Write(pStreamData);
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:28，代码来源:XnDeviceBase.cpp

示例4: FindStream

XnStatus XnSensor::GetBufferPool(const XnChar* strStream, XnBufferPool** ppBufferPool)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	XnDeviceModuleHolder* pHolder;
	nRetVal = FindStream(strStream, &pHolder);
	XN_IS_STATUS_OK(nRetVal);

	XnSensorStreamHolder* pSensorStreamHolder = (XnSensorStreamHolder*)(pHolder);
	XnDeviceStream* pStream = pSensorStreamHolder->GetStream();

	XnUInt64 nFrameBased;
	nRetVal = pStream->GetProperty(XN_STREAM_PROPERTY_IS_FRAME_BASED, &nFrameBased);
	XN_IS_STATUS_OK(nRetVal);

	if (nFrameBased == 0)
	{
		return XN_STATUS_BAD_TYPE;
	}

	XnFrameStream* pFrameStream = (XnFrameStream*)pStream;
	*ppBufferPool = pFrameStream->GetBufferPool();
	
	return (XN_STATUS_OK);
}

开发者ID:02031991，项目名称:Sensor，代码行数:25，代码来源:XnSensor.cpp

示例5: SetIsOpenCallback

XnStatus XN_CALLBACK_TYPE XnDeviceStream::SetIsOpenCallback(XnActualIntProperty* /*pSender*/, XnUInt64 nValue, void* pCookie)
{
	XnDeviceStream* pStream = (XnDeviceStream*)pCookie;
	if (nValue == TRUE)
	{
		return pStream->Open();
	}
	else
	{
		return pStream->Close();
	}
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:12，代码来源:XnDeviceStream.cpp

示例6: GetStreamRequiredDataSize

XnStatus XnDeviceBase::GetStreamRequiredDataSize(const XnChar* StreamName, XnUInt32* pnRequiredSize)
{
	XnStatus nRetVal = XN_STATUS_OK;

	// find stream
	XnDeviceStream* pStream;
	nRetVal = FindStream(StreamName, &pStream);
	XN_IS_STATUS_OK(nRetVal);

	*pnRequiredSize = pStream->GetRequiredDataSize();

	return XN_STATUS_OK;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:13，代码来源:XnDeviceBase.cpp

示例7: HasPrimaryStreamAdvanced

XnBool XnDeviceBase::HasPrimaryStreamAdvanced(XnStreamDataSet* pOutputSet)
{
	if (strcmp(m_PrimaryStream.GetValue(), XN_PRIMARY_STREAM_NONE) == 0)
	{
		// special case of None: condition is always true
		return TRUE;
	}

	const XnChar* astrNames[XN_DEVICE_BASE_MAX_STREAMS_COUNT];
	XnUInt32 nArraySize = XN_DEVICE_BASE_MAX_STREAMS_COUNT;

	// take a list of streams to check for new data
	if (strcmp(m_PrimaryStream.GetValue(), XN_PRIMARY_STREAM_ANY) != 0)
	{
		// we have a specific stream. Add it to the list
		astrNames[0] = m_PrimaryStream.GetValue();
		nArraySize = 1;
	}
	else
	{
		// special case of ANY. we need to check every one of requested streams
		XnStreamData* apStreamOutputs[XN_DEVICE_BASE_MAX_STREAMS_COUNT];
		if (XN_STATUS_OK != XnStreamDataSetCopyToArray(pOutputSet, apStreamOutputs, &nArraySize))
		{
			return FALSE;
		}

		for (XnUInt32 i = 0; i < nArraySize; ++i)
		{
			astrNames[i] = apStreamOutputs[i]->StreamName;
		}
	}

	// now check if we have new data
	for (XnUInt32 i = 0; i < nArraySize; ++i)
	{
		XnDeviceStream* pStream = NULL;
		if (XN_STATUS_OK == FindStream(astrNames[i], &pStream))
		{
			if (pStream->IsNewDataAvailable())
				return TRUE;
		}
	}

	return FALSE;
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:46，代码来源:XnDeviceBase.cpp

示例8: switch

OniStatus XnOniDevice::setProperty(int propertyId, const void* data, int dataSize)
{
	switch (propertyId)
	{
	case ONI_DEVICE_PROPERTY_IMAGE_REGISTRATION:
		{
			if (dataSize == sizeof(OniImageRegistrationMode))
			{
				OniImageRegistrationMode* mode = (OniImageRegistrationMode*)data;

				// Find the depth stream in the sensor.
				XnDeviceStream* pDepth = NULL;
				XnStatus xnrc = m_sensor.GetStream(XN_STREAM_NAME_DEPTH, &pDepth);
				if (xnrc != XN_STATUS_OK)
				{
					return ONI_STATUS_BAD_PARAMETER;
				}

				// Set the mode in the depth stream.
				XnUInt64 val = (*mode == ONI_IMAGE_REGISTRATION_DEPTH_TO_COLOR) ? 1 : 0;
				xnrc = pDepth->SetProperty(XN_STREAM_PROPERTY_REGISTRATION, val);
				if (xnrc != XN_STATUS_OK)
				{
					return ONI_STATUS_ERROR;
				}
			}
			else
			{
				m_driverServices.errorLoggerAppend("Unexpected size: %d != %d\n", dataSize, sizeof(OniImageRegistrationMode));
				return ONI_STATUS_ERROR;
			}
		}
		break;
	default:
		XnStatus nRetVal = m_sensor.DeviceModule()->SetProperty(propertyId, data, dataSize);
		if (nRetVal != XN_STATUS_OK)
		{
			return ONI_STATUS_BAD_PARAMETER;
		}
	}
	return ONI_STATUS_OK;
}

开发者ID:MetaMagic，项目名称:OpenNI2，代码行数:42，代码来源:XnOniDevice.cpp

示例9: HasSynchedFrameArrived

XnBool XnSensor::HasSynchedFrameArrived(const XnChar* strDepthStream, const XnChar* strImageStream)
{
	// find both streams
	XnDeviceStream* pDepth;
	XnDeviceStream* pImage;

	if (XN_STATUS_OK != FindStream(strDepthStream, &pDepth))
		return FALSE;

	if (XN_STATUS_OK != FindStream(strImageStream, &pImage))
		return FALSE;

	XnUInt32 nThreshold = XN_SENSOR_FRAME_SYNC_MAX_DIFF;
	if (IsHighResTimestamps())
		nThreshold *= 1000;

	// wait for both to advance, and time difference to be less than threshold
	XnInt32 nTimestampDiff = XnInt32(pDepth->GetLastTimestamp() - pImage->GetLastTimestamp());

	XnBool bConditionMet = (
		pDepth->IsNewDataAvailable() &&
		pImage->IsNewDataAvailable() &&
		(XnUInt32)abs(nTimestampDiff) <= nThreshold
		);

	if (xnLogIsDumpMaskEnabled(XN_DUMP_FRAME_SYNC))
	{
		XnUInt64 nNow;
		xnOSGetHighResTimeStamp(&nNow);
		xnDumpWriteString(m_FrameSyncDump, "%llu,%u,%llu,%u,%llu,%s\n",
			nNow,
			pDepth->IsNewDataAvailable(),
			pDepth->GetLastTimestamp(),
			pImage->IsNewDataAvailable(),
			pImage->GetLastTimestamp(),
			bConditionMet ? "OK" : "Waiting");
	}

	return bConditionMet;
}

开发者ID:AlpinistPanda，项目名称:SensorKinect，代码行数:40，代码来源:XnSensor.cpp

示例10: xnLogInfo

XnStatus XnDeviceBase::DestroyStream(const XnChar* StreamName)
{
    XnStatus nRetVal = XN_STATUS_OK;

    xnLogInfo(XN_MASK_DDK, "Destroying stream '%s'...", StreamName);

    // keep the stream name (we now delete the module, so the name will be lost)
    XnChar strStreamName[XN_DEVICE_MAX_STRING_LENGTH];
    strncpy(strStreamName, StreamName, XN_DEVICE_MAX_STRING_LENGTH);

    xnl::AutoCSLocker lock(m_hLock);

    // Find the stream
    XnDeviceModuleHolder* pStreamHolder;
    nRetVal = FindStream(strStreamName, &pStreamHolder);
    XN_IS_STATUS_OK(nRetVal);

    XnDeviceStream* pStream = (XnDeviceStream*)pStreamHolder->GetModule();
    XnUInt32 nRefCount = pStream->DecRef();
    if (0 == nRefCount)
    {
        // remove it from map
        nRetVal = RemoveModule(strStreamName);
        XN_IS_STATUS_OK(nRetVal);

        // and free it's memory
        DestroyStreamModule(pStreamHolder);

        // free memory of registered properties to this stream
        FreeModuleRegisteredProperties(StreamName);

        xnLogVerbose(XN_MASK_DDK, "'%s' stream destroyed.", strStreamName);
    }
    else
    {
        xnLogVerbose(XN_MASK_DDK, "'%s' stream now has %d references.", strStreamName, nRefCount);
    }

    return XN_STATUS_OK;
}

开发者ID:higuchi-yuuki，项目名称:OpenNI2，代码行数:40，代码来源:XnDeviceBase.cpp

示例11: SetMirror

XnStatus XnDeviceBase::SetMirror(XnBool bMirror)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	// change all streams
	for (XnStringsHash::Iterator it = m_Modules.begin(); it != m_Modules.end(); ++it)
	{
		XnDeviceModuleHolder* pModuleHolder = (XnDeviceModuleHolder*)it.Value();
		if (IsStream(pModuleHolder->GetModule()))
		{
			XnDeviceStream* pStream = (XnDeviceStream*)pModuleHolder->GetModule();
			nRetVal = pStream->SetMirror(bMirror);
			XN_IS_STATUS_OK(nRetVal);
		}
	}

	// and set property
	nRetVal = m_DeviceMirror.UnsafeUpdateValue(bMirror);
	XN_IS_STATUS_OK(nRetVal);
	
	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:22，代码来源:XnDeviceBase.cpp

示例12: XN_PROPERTY_SET_CREATE_ON_STACK

XnStatus XnServerSensorInvoker::OnStreamAdded(const XnChar* StreamName)
{
	XnStatus nRetVal = XN_STATUS_OK;

	// get all props
	XN_PROPERTY_SET_CREATE_ON_STACK(props);
	nRetVal = m_sensor.GetAllProperties(&props, FALSE, StreamName);
	XN_IS_STATUS_OK(nRetVal);

	// register to all props
	nRetVal = RegisterToProps(&props);
	XN_IS_STATUS_OK(nRetVal);

	XnActualPropertiesHash* pStreamProps = props.pData->Begin()->Value();

	// create stream data
	SensorInvokerStream serverStream;
	xnOSMemSet(&serverStream, 0, sizeof(serverStream));
	strcpy(serverStream.strType, StreamName);

	XN_VALIDATE_NEW(serverStream.pNewDataEvent, NewStreamDataEvent);

	// check if this is a frame stream
	XnProperty* pIsFrameBased;
	nRetVal = pStreamProps->Get(XN_STREAM_PROPERTY_IS_FRAME_BASED, pIsFrameBased);
	if (nRetVal == XN_STATUS_OK)
	{
		XnActualIntProperty* pIntProp = (XnActualIntProperty*)pIsFrameBased;
		serverStream.bFrameStream = (pIntProp->GetValue() == TRUE);
	}

	if (serverStream.bFrameStream)
	{
		// create the "shared memory name" property
		XN_VALIDATE_NEW(serverStream.pSharedMemoryName, XnActualStringProperty, XN_STREAM_PROPERTY_SHARED_BUFFER_NAME);

		// and add it to the stream
		XnDeviceStream* pStream;
		nRetVal = m_sensor.GetStream(StreamName, &pStream);
		if (nRetVal != XN_STATUS_OK)
		{
			XN_DELETE(serverStream.pNewDataEvent);
			XN_DELETE(serverStream.pSharedMemoryName);
			return nRetVal;
		}

		nRetVal = pStream->AddProperty(serverStream.pSharedMemoryName);
		if (nRetVal != XN_STATUS_OK)
		{
			XN_DELETE(serverStream.pNewDataEvent);
			XN_DELETE(serverStream.pSharedMemoryName);
			return nRetVal;
		}

		// create a shared memory buffer pool for it
		nRetVal = SetStreamSharedMemory(&serverStream);
		if (nRetVal != XN_STATUS_OK)
		{
			XN_DELETE(serverStream.pNewDataEvent);
			XN_DELETE(serverStream.pSharedMemoryName);
			return nRetVal;
		}
	}

	// create a stream data object for the stream
	nRetVal = m_sensor.CreateStreamData(StreamName, &serverStream.pStreamData);
	if (nRetVal != XN_STATUS_OK)
	{
		XN_DELETE(serverStream.pNewDataEvent);
		XN_DELETE(serverStream.pSharedMemoryName);
		return (nRetVal);
	}

	// and add it to our list of streams
	nRetVal = m_streams.Set(StreamName, serverStream);
	if (nRetVal != XN_STATUS_OK)
	{
		XN_DELETE(serverStream.pNewDataEvent);
		XN_DELETE(serverStream.pSharedMemoryName);
		return (nRetVal);
	}

	return (XN_STATUS_OK);
}

开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:84，代码来源:XnServerSensorInvoker.cpp

示例13: UpdateRequiredSizeCallback

XnStatus XN_CALLBACK_TYPE XnDeviceStream::UpdateRequiredSizeCallback(const XnProperty* /*pSenser*/, void* pCookie)
{
	XnDeviceStream* pStream = (XnDeviceStream*)pCookie;
	return pStream->UpdateRequiredSize();
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:5，代码来源:XnDeviceStream.cpp

示例14: SetOutputFormatCallback

XnStatus XN_CALLBACK_TYPE XnDeviceStream::SetOutputFormatCallback(XnActualIntProperty* /*pSender*/, XnUInt64 nValue, void* pCookie)
{
	XnDeviceStream* pStream = (XnDeviceStream*)pCookie;
	return pStream->SetOutputFormat((XnOutputFormats)nValue);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:5，代码来源:XnDeviceStream.cpp

示例15: SetIsMirrorCallback

XnStatus XN_CALLBACK_TYPE XnDeviceStream::SetIsMirrorCallback(XnActualIntProperty* /*pSender*/, XnUInt64 nValue, void* pCookie)
{
	XnDeviceStream* pStream = (XnDeviceStream*)pCookie;
	return pStream->SetMirror((XnBool)nValue);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:5，代码来源:XnDeviceStream.cpp

示例16: xnLogInfo

XnStatus XnDeviceBase::CreateStreamImpl(const XnChar* strType, const XnChar* strName, const XnActualPropertiesHash* pInitialSet)
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnLogInfo(XN_MASK_DDK, "Creating stream '%s' of type '%s'...", strName, strType);

	XnDeviceModule* pModule;
	if (FindModule(strName, &pModule) == XN_STATUS_OK)
	{
		// already exists. check sharing mode (when shared, we allow "creating" the same stream)
		if (GetSharingMode() != XN_DEVICE_SHARED ||
			!IsStream(pModule) ||
			strcmp(strType, ((XnDeviceStream*)pModule)->GetType()) != 0)
		{
			XN_LOG_WARNING_RETURN(XN_STATUS_STREAM_ALREADY_EXISTS, XN_MASK_DDK, "A stream with this name already exists!");
		}

		// OK, we'll allow this. Just set new configuration
		if (pInitialSet != NULL)
		{
			nRetVal = pModule->BatchConfig(*pInitialSet);
			XN_IS_STATUS_OK(nRetVal);
		}
	}
	else
	{
		// create stream
		XnDeviceModuleHolder* pNewStreamHolder = NULL;

		nRetVal = CreateStreamModule(strType, strName, &pNewStreamHolder);
		XN_IS_STATUS_OK(nRetVal);

		XnDeviceStream* pNewStream = (XnDeviceStream*)(pNewStreamHolder->GetModule());
		if (pNewStream == NULL)
		{
			DestroyStreamModule(pNewStreamHolder);
			XN_LOG_ERROR_RETURN(XN_STATUS_ERROR, XN_MASK_DDK, "Internal Error: Invalid new stream!");
		}

		// initialize the stream
		xnLogVerbose(XN_MASK_DDK, "Initializing stream '%s'...", strName);

		nRetVal = pNewStreamHolder->Init(pInitialSet);
		if (nRetVal != XN_STATUS_OK)
		{
			DestroyStreamModule(pNewStreamHolder);
			return (nRetVal);
		}

		// set it's mirror value (if not requested otherwise)
		XnBool bSetMirror = TRUE;

		if (pInitialSet != NULL)
		{
			XnActualPropertiesHash::ConstIterator it = pInitialSet->end();
			if (XN_STATUS_OK == pInitialSet->Find(XN_MODULE_PROPERTY_MIRROR, it))
			{
				bSetMirror = FALSE;
			}
		}

		if (bSetMirror)
		{
			nRetVal = pNewStream->SetMirror((XnBool)m_DeviceMirror.GetValue());
			if (nRetVal != XN_STATUS_OK)
			{
				DestroyStreamModule(pNewStreamHolder);
				return (nRetVal);
			}
		}

		// add it to the list of existing modules
		nRetVal = AddModule(pNewStreamHolder);
		if (nRetVal != XN_STATUS_OK)
		{
			DestroyStreamModule(pNewStreamHolder);
			return (nRetVal);
		}

		xnLogInfo(XN_MASK_DDK, "Stream '%s' was initialized.", strName);

		nRetVal = StreamAdded(pNewStream);
		XN_IS_STATUS_OK(nRetVal);

		xnLogInfo(XN_MASK_DDK, "'%s' stream was created.", strName);
	}

	return (XN_STATUS_OK);
}

开发者ID:0pascal0，项目名称:SensorKinect，代码行数:89，代码来源:XnDeviceBase.cpp

注：本文中的XnDeviceStream类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ XnProperty类代码示例发布时间：2022-05-31

C++ XnDeviceModuleHolder类代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ XnDeviceStream类代码示例

示例1: xnLogVerbose

示例2: xnLogVerbose

示例3: XN_VALIDATE_INPUT_PTR

示例4: FindStream

示例5: SetIsOpenCallback

示例6: GetStreamRequiredDataSize

示例7: HasPrimaryStreamAdvanced

示例8: switch

示例9: HasSynchedFrameArrived

示例10: xnLogInfo

示例11: SetMirror

示例12: XN_PROPERTY_SET_CREATE_ON_STACK

示例13: UpdateRequiredSizeCallback

示例14: SetOutputFormatCallback

示例15: SetIsMirrorCallback

示例16: xnLogInfo

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

CVE-2022-29834

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053