C++ ADDR_3RD_CYCLE函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ADDR_3RD_CYCLE函数的典型用法代码示例。如果您正苦于以下问题：C++ ADDR_3RD_CYCLE函数的具体用法？C++ ADDR_3RD_CYCLE怎么用？C++ ADDR_3RD_CYCLE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ADDR_3RD_CYCLE函数的7个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HAL_NAND_Erase_Block

/**
  * @brief  NAND memory Block erase.
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pAddress: pointer to NAND address structure
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
{
  uint32_t deviceaddress = 0;
  uint32_t tickstart = 0;
  
  /* Process Locked */
  __HAL_LOCK(hnand);
  
  /* Check the NAND controller state */
  if(hnand->State == HAL_NAND_STATE_BUSY)
  {
     return HAL_BUSY;
  }
  
  /* Identify the device address */
  deviceaddress = NAND_DEVICE;
  
  /* Update the NAND controller state */
  hnand->State = HAL_NAND_STATE_BUSY;  
  
  /* Send Erase block command sequence */
  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;

  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  
  /* for 512 and 1 GB devices, 4th cycle is required */     
  if(hnand->Info.BlockNbr >= 1024)
  {
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  }  
		
  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1; 
  
  /* Update the NAND controller state */
  hnand->State = HAL_NAND_STATE_READY;
  
  /* Get tick */
  tickstart = HAL_GetTick();
  
  /* Read status until NAND is ready */
  while(HAL_NAND_Read_Status(hnand) != NAND_READY)
  {
    if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
    {
      /* Process unlocked */
      __HAL_UNLOCK(hnand);    
  
      return HAL_TIMEOUT; 
    } 
  }    
 
  /* Process unlocked */
  __HAL_UNLOCK(hnand);    
  
  return HAL_OK;  
}

开发者ID:Archcady，项目名称:mbed-os，代码行数:65，代码来源:stm32l4xx_hal_nand.c

示例2: HAL_NAND_Read_ID

/**
  * @brief  Read the NAND memory electronic signature
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pNAND_ID: NAND ID structure
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
{
  __IO uint32_t data = 0;
  uint32_t deviceaddress = 0;

  /* Process Locked */
  __HAL_LOCK(hnand);  
  
  /* Check the NAND controller state */
  if(hnand->State == HAL_NAND_STATE_BUSY)
  {
     return HAL_BUSY;
  }
  
  /* Identify the device address */
  if(hnand->Init.NandBank == FMC_NAND_BANK2)
  {
    deviceaddress = NAND_DEVICE1;
  }
  else
  {
    deviceaddress = NAND_DEVICE2;
  }
  
  /* Update the NAND controller state */ 
  hnand->State = HAL_NAND_STATE_BUSY;
  
  /* Send Read ID command sequence */   
  *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA))  = NAND_CMD_READID;
  *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;

  /* Read the electronic signature from NAND flash */  
  data = *(__IO uint32_t *)deviceaddress;
  
  /* Return the data read */
  pNAND_ID->Maker_Id   = ADDR_1ST_CYCLE(data);
  pNAND_ID->Device_Id  = ADDR_2ND_CYCLE(data);
  pNAND_ID->Third_Id   = ADDR_3RD_CYCLE(data);
  pNAND_ID->Fourth_Id  = ADDR_4TH_CYCLE(data);
  
  /* Update the NAND controller state */ 
  hnand->State = HAL_NAND_STATE_READY;
  
  /* Process unlocked */
  __HAL_UNLOCK(hnand);
   
  return HAL_OK;
}

开发者ID:Wanghuaichen，项目名称:dt900，代码行数:55，代码来源:stm32f4xx_hal_nand.c

示例3: HAL_NAND_Erase_Block

/**
  * @brief  NAND memory Block erase 
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pAddress : pointer to NAND address structure
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
{
  uint32_t DeviceAddress = 0;
  
  /* Process Locked */
  __HAL_LOCK(hnand);
  
  /* Check the NAND controller state */
  if(hnand->State == HAL_NAND_STATE_BUSY)
  {
     return HAL_BUSY;
  }
  
  /* Identify the device address */
  DeviceAddress = NAND_DEVICE;
  
  /* Update the NAND controller state */
  hnand->State = HAL_NAND_STATE_BUSY;  
  
  /* Send Erase block command sequence */
  *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_ERASE0;

  *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
  __DSB();
  
  /* for 512 and 1 GB devices, 4th cycle is required */     
  if(hnand->Info.BlockNbr >= 1024)
  {
    *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
    __DSB();
  }  
		
  *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_ERASE1; 
  __DSB();
  
  /* Update the NAND controller state */
  hnand->State = HAL_NAND_STATE_READY;
  
  /* Process unlocked */
  __HAL_UNLOCK(hnand);    
  
  return HAL_OK;  
}

开发者ID:ASzz，项目名称:verisure1512，代码行数:52，代码来源:stm32f7xx_hal_nand.c

示例4: HAL_NAND_Write_SpareArea

/**
  * @brief  Write Spare area(s) to NAND memory.
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pAddress: pointer to NAND address structure
  * @param  pBuffer: pointer to source buffer to write  
  * @param  NumSpareAreaTowrite: number of spare areas to write to block
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
{
  __IO uint32_t index = 0;
  uint32_t tickstart = 0;
  uint32_t deviceaddress = 0, size = 0, num_spare_area_written = 0, addressstatus = NAND_VALID_ADDRESS;
  NAND_AddressTypeDef nandaddress;
  uint32_t addressoffset = 0;

  /* Process Locked */
  __HAL_LOCK(hnand); 
  
  /* Check the NAND controller state */
  if(hnand->State == HAL_NAND_STATE_BUSY)
  {
     return HAL_BUSY;
  }
  
  /* Identify the device address */
  deviceaddress = NAND_DEVICE;
  
  /* Update the FMC_NAND controller state */
  hnand->State = HAL_NAND_STATE_BUSY;  
  
  /* Save the content of pAddress as it will be modified */
  nandaddress.Block     = pAddress->Block;
  nandaddress.Page      = pAddress->Page;
  nandaddress.Zone      = pAddress->Zone;
  
  /* Spare area(s) write loop */
  while((NumSpareAreaTowrite != 0) && (addressstatus == NAND_VALID_ADDRESS))
  {  
    /* update the buffer size */
    size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_written);

    /* Get the address offset */
    addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
    
    /* Send write Spare area command sequence */
    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;

    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;  
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);  
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);  
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset); 
  
    /* for 512 and 1 GB devices, 4th cycle is required */     
    if(hnand->Info.BlockNbr >= 1024)
    {
      *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
    }
  
    /* Write data to memory */
    for(; index < size; index++)
    {
      *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
    }
   
    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
    
    /* Get tick */
    tickstart = HAL_GetTick();
   
    /* Read status until NAND is ready */
    while(HAL_NAND_Read_Status(hnand) != NAND_READY)
    {
      if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
      {
        return HAL_TIMEOUT; 
      }   
    }

    /* Increment written spare areas number */
    num_spare_area_written++;
    
    /* Decrement spare areas to write */
    NumSpareAreaTowrite--;
    
    /* Increment the NAND address */
    addressstatus = NAND_AddressIncrement(hnand, &nandaddress);
  }

  /* Update the NAND controller state */
  hnand->State = HAL_NAND_STATE_READY;

  /* Process unlocked */
  __HAL_UNLOCK(hnand);
    
  return HAL_OK;  
}

开发者ID:Archcady，项目名称:mbed-os，代码行数:99，代码来源:stm32l4xx_hal_nand.c

示例5: HAL_NAND_Read_Page

/**
  * @brief  Read Page(s) from NAND memory block.
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pAddress: pointer to NAND address structure
  * @param  pBuffer: pointer to destination read buffer
  * @param  NumPageToRead: number of pages to read from block 
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
{   
  __IO uint32_t index  = 0;
  uint32_t deviceaddress = 0, size = 0, numpagesread = 0, addressstatus = NAND_VALID_ADDRESS;
  NAND_AddressTypeDef nandaddress;
  uint32_t addressoffset = 0;
  
  /* Process Locked */
  __HAL_LOCK(hnand); 
  
  /* Check the NAND controller state */
  if(hnand->State == HAL_NAND_STATE_BUSY)
  {
     return HAL_BUSY;
  }
  
  /* Identify the device address */
  deviceaddress = NAND_DEVICE;

  /* Update the NAND controller state */ 
  hnand->State = HAL_NAND_STATE_BUSY;
  
  /* Save the content of pAddress as it will be modified */
  nandaddress.Block     = pAddress->Block;
  nandaddress.Page      = pAddress->Page;
  nandaddress.Zone      = pAddress->Zone;
  
  /* Page(s) read loop */
  while((NumPageToRead != 0) && (addressstatus == NAND_VALID_ADDRESS))  
  {	   
    /* update the buffer size */
    size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpagesread);
    
    /* Get the address offset */
    addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
    
    /* Send read page command sequence */
    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;  
   
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00; 
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset); 
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset); 
    *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
  
    /* for 512 and 1 GB devices, 4th cycle is required */    
    if(hnand->Info.BlockNbr >= 1024)
    {
      *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
    }
  
    *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA))  = NAND_CMD_AREA_TRUE1;
      
    /* Get Data into Buffer */    
    for(; index < size; index++)
    {
      *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
    }
    
    /* Increment read pages number */
    numpagesread++;
    
    /* Decrement pages to read */
    NumPageToRead--;
    
    /* Increment the NAND address */
    addressstatus = NAND_AddressIncrement(hnand, &nandaddress);
  }
  
  /* Update the NAND controller state */ 
  hnand->State = HAL_NAND_STATE_READY;
  
  /* Process unlocked */
  __HAL_UNLOCK(hnand);  
    
  return HAL_OK;

}

开发者ID:Archcady，项目名称:mbed-os，代码行数:86，代码来源:stm32l4xx_hal_nand.c

示例6: HAL_NAND_Write_SpareArea

/**
  * @brief  Write Spare area(s) to NAND memory
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pAddress : pointer to NAND address structure
  * @param  pBuffer : pointer to source buffer to write
  * @param  NumSpareAreaTowrite  : number of spare areas to write to block
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
{
    __IO uint32_t index = 0;
    uint32_t tickstart = 0;
    uint32_t deviceAddress = 0, size = 0, numSpareAreaWritten = 0, nandAddress = 0;

    /* Process Locked */
    __HAL_LOCK(hnand);

    /* Check the NAND controller state */
    if(hnand->State == HAL_NAND_STATE_BUSY) {
        return HAL_BUSY;
    }

    /* Identify the device address */
    deviceAddress = NAND_DEVICE;

    /* Update the FMC_NAND controller state */
    hnand->State = HAL_NAND_STATE_BUSY;

    /* NAND raw address calculation */
    nandAddress = ARRAY_ADDRESS(pAddress, hnand);

    /* Spare area(s) write loop */
    while((NumSpareAreaTowrite != 0) && (nandAddress < ((hnand->Info.BlockSize) * (hnand->Info.SpareAreaSize) * (hnand->Info.ZoneSize)))) {
        /* update the buffer size */
        size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * numSpareAreaWritten);

        /* Send write Spare area command sequence */
        *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
        *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;

        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00;
        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
        __DSB();
        /* for 512 and 1 GB devices, 4th cycle is required */
        if(hnand->Info.BlockNbr >= 1024) {
            *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(nandAddress);
            __DSB();
        }

        /* Write data to memory */
        for(index = 0; index < size; index++) {
            *(__IO uint8_t *)deviceAddress = *(uint8_t *)pBuffer++;
            __DSB();
        }

        *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
        __DSB();

        /* Read status until NAND is ready */
        while(HAL_NAND_Read_Status(hnand) != NAND_READY) {
            /* Get tick */
            tickstart = HAL_GetTick();

            if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT) {
                return HAL_TIMEOUT;
            }
        }

        /* Increment written spare areas number */
        numSpareAreaWritten++;

        /* Decrement spare areas to write */
        NumSpareAreaTowrite--;

        /* Increment the NAND address */
        nandAddress = (uint32_t)(nandAddress + (hnand->Info.PageSize));
    }

    /* Update the NAND controller state */
    hnand->State = HAL_NAND_STATE_READY;

    /* Process unlocked */
    __HAL_UNLOCK(hnand);

    return HAL_OK;
}

开发者ID:peterliu2，项目名称:FreeRTOS，代码行数:89，代码来源:stm32f7xx_hal_nand.c

示例7: HAL_NAND_Read_SpareArea

/**
  * @brief  Read Spare area(s) from NAND memory
  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
  *                the configuration information for NAND module.
  * @param  pAddress : pointer to NAND address structure
  * @param  pBuffer: pointer to source buffer to write
  * @param  NumSpareAreaToRead: Number of spare area to read
  * @retval HAL status
*/
HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
{
    __IO uint32_t index = 0;
    uint32_t deviceAddress = 0, size = 0, numSpareAreaRead = 0, nandAddress = 0;

    /* Process Locked */
    __HAL_LOCK(hnand);

    /* Check the NAND controller state */
    if(hnand->State == HAL_NAND_STATE_BUSY) {
        return HAL_BUSY;
    }

    /* Identify the device address */
    deviceAddress = NAND_DEVICE;

    /* Update the NAND controller state */
    hnand->State = HAL_NAND_STATE_BUSY;

    /* NAND raw address calculation */
    nandAddress = ARRAY_ADDRESS(pAddress, hnand);

    /* Spare area(s) read loop */
    while((NumSpareAreaToRead != 0) && (nandAddress < ((hnand->Info.BlockSize) * (hnand->Info.SpareAreaSize) * (hnand->Info.ZoneSize)))) {

        /* update the buffer size */
        size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * numSpareAreaRead);

        /* Send read spare area command sequence */
        *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;

        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00;
        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);
        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);
        *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);

        /* for 512 and 1 GB devices, 4th cycle is required */
        if(hnand->Info.BlockNbr >= 1024) {
            *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(nandAddress);
        }

        *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;

        /* Get Data into Buffer */
        for(index = 0; index < size; index++) {
            *(uint8_t *)pBuffer++ = *(uint8_t *)deviceAddress;
        }

        /* Increment read spare areas number */
        numSpareAreaRead++;

        /* Decrement spare areas to read */
        NumSpareAreaToRead--;

        /* Increment the NAND address */
        nandAddress = (uint32_t)(nandAddress + (hnand->Info.SpareAreaSize));
    }

    /* Update the NAND controller state */
    hnand->State = HAL_NAND_STATE_READY;

    /* Process unlocked */
    __HAL_UNLOCK(hnand);

    return HAL_OK;
}

开发者ID:peterliu2，项目名称:FreeRTOS，代码行数:75，代码来源:stm32f7xx_hal_nand.c

注：本文中的ADDR_3RD_CYCLE函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ADDR_3rd_CYCLE函数代码示例发布时间：2022-05-30

C++ ADDR_2nd_CYCLE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18443|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9750|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8230|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8590|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8503|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9467|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8484|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7910|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8466|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7435|2022-11-06

客服电话

电子邮件

C++ ADDR_3RD_CYCLE函数代码示例

示例1: HAL_NAND_Erase_Block

示例2: HAL_NAND_Read_ID

示例3: HAL_NAND_Erase_Block

示例4: HAL_NAND_Write_SpareArea

示例5: HAL_NAND_Read_Page

示例6: HAL_NAND_Write_SpareArea

示例7: HAL_NAND_Read_SpareArea

请发表评论

全部评论

上一篇：

下一篇：

序言 - Kubernetes 实践指南

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053