本文整理汇总了C++中BCD_TO_BIN函数的典型用法代码示例。如果您正苦于以下问题:C++ BCD_TO_BIN函数的具体用法?C++ BCD_TO_BIN怎么用?C++ BCD_TO_BIN使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了BCD_TO_BIN函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ds1307_convert_to_time
static void
ds1307_convert_to_time( struct rtc_time *dt, char *buf)
{
dt->tm_sec = BCD_TO_BIN(buf[0]);
dt->tm_min = BCD_TO_BIN(buf[1]);
if ( TWELVE_HOUR_MODE(buf[2]) )
{
dt->tm_hour = HOURS_12(buf[2]);
if (HOURS_AP(buf[2])) /* PM */
{
dt->tm_hour += 12;
}
}
else /* 24-hour-mode */
{
dt->tm_hour = HOURS_24(buf[2]);
}
dt->tm_mday = BCD_TO_BIN(buf[4]);
/* dt->tm_mon is zero-based */
dt->tm_mon = BCD_TO_BIN(buf[5]) - 1;
/* year is 1900 + dt->tm_year */
dt->tm_year = BCD_TO_BIN(buf[6]) + 100;
if( rtc_debug > 2)
{
printk("ds1307_get_datetime: year = %d\n", dt->tm_year);
printk("ds1307_get_datetime: mon = %d\n", dt->tm_mon);
printk("ds1307_get_datetime: mday = %d\n", dt->tm_mday);
printk("ds1307_get_datetime: hour = %d\n", dt->tm_hour);
printk("ds1307_get_datetime: min = %d\n", dt->tm_min);
printk("ds1307_get_datetime: sec = %d\n", dt->tm_sec);
}
}
开发者ID:GunioRobot,项目名称:MI424WR_GEN2_Rev_E-F,代码行数:35,代码来源:ds1307.c
示例2: EntryPoints
/*****************************************************************************
* EntryPoints: Reads the information about the entry points on the disc.
*****************************************************************************/
static int EntryPoints( access_t *p_access )
{
access_sys_t *p_sys = p_access->p_sys;
uint8_t sector[VCD_DATA_SIZE];
entries_sect_t entries;
int i_nb;
/* Read the entry point sector */
if( ioctl_ReadSectors( VLC_OBJECT(p_access), p_sys->vcddev,
VCD_ENTRIES_SECTOR, sector, 1, VCD_TYPE ) < 0 )
{
msg_Err( p_access, "could not read entry points sector" );
return VLC_EGENERIC;
}
memcpy( &entries, sector, CD_SECTOR_SIZE );
i_nb = GetWBE( &entries.i_entries_nb );
if( i_nb > 500 )
{
msg_Err( p_access, "invalid entry points number" );
return VLC_EGENERIC;
}
if( strncmp( entries.psz_id, "ENTRYVCD", sizeof( entries.psz_id ) ) &&
strncmp( entries.psz_id, "ENTRYSVD", sizeof( entries.psz_id ) ) )
{
msg_Err( p_access, "unrecognized entry points format" );
return VLC_EGENERIC;
}
for( int i = 0; i < i_nb; i++ )
{
const int i_title = BCD_TO_BIN(entries.entry[i].i_track) - 2;
const int i_sector =
(MSF_TO_LBA2( BCD_TO_BIN( entries.entry[i].msf.minute ),
BCD_TO_BIN( entries.entry[i].msf.second ),
BCD_TO_BIN( entries.entry[i].msf.frame ) ));
seekpoint_t *s;
if( i_title < 0 ) continue; /* Should not occur */
if( i_title >= p_sys->i_titles ) continue;
msg_Dbg( p_access, "Entry[%d] title=%d sector=%d",
i, i_title, i_sector );
s = vlc_seekpoint_New();
s->i_byte_offset = (i_sector - p_sys->p_sectors[i_title+1]) *
VCD_DATA_SIZE;
TAB_APPEND( p_sys->title[i_title]->i_seekpoint,
p_sys->title[i_title]->seekpoint, s );
}
return VLC_SUCCESS;
}
开发者ID:Ackhuman,项目名称:vlc,代码行数:59,代码来源:vcd.c
示例3: getdate
void getdate( struct date *dateblk)
{
unsigned long tmp;
__asm__ __volatile__("int $0x40":"=a"(tmp):"0"(29));
dateblk->da_year=2000+(tmp&0xff);
dateblk->da_mon=(tmp>>8)&0xff;
dateblk->da_day=(tmp>>16)&0xff;
BCD_TO_BIN(dateblk->da_year);
BCD_TO_BIN(dateblk->da_mon);
BCD_TO_BIN(dateblk->da_day);
}
开发者ID:Misha-Mainenko,项目名称:kolibrios-llvm,代码行数:11,代码来源:getdate.c
示例4: _dos_getdate
void _dos_getdate(struct _dosdate_t *date)
{
unsigned long tmp;
__asm__ __volatile__("int $0x40":"=a"(tmp):"0"(29));
date->year=2000+(tmp&0xff);
date->month=(tmp>>8)&0xff;
date->day= (tmp>>16)&0xff;
date->dayofweek=0; /* xxx - how to do it correctly ? */
BCD_TO_BIN(date->year);
BCD_TO_BIN(date->month);
BCD_TO_BIN(date->day);
}
开发者ID:Misha-Mainenko,项目名称:kolibrios-llvm,代码行数:12,代码来源:d_getdat.c
示例5: GetCmosTime
//---------------------------------------------------------------------------------------------------------------------------
//
// 获得 CMOS 时间
//
//---------------------------------------------------------------------------------------------------------------------------
void GetCmosTime(CmosTime* t)
{
if (t) {
t->sec = ReadCmos(0);
t->min = ReadCmos(2);
t->hour= ReadCmos(4);
}
BCD_TO_BIN(t->sec);
BCD_TO_BIN(t->min);
BCD_TO_BIN(t->hour);
}
开发者ID:huashengshuita,项目名称:HITCS-30--FAT32-For-Linux0.11,代码行数:17,代码来源:Timer.c
示例6: GetCmosDate
//-----------------------------------------------------------------------------------------------------------------------------
//
//获得 CMOS 日期
//
//-----------------------------------------------------------------------------------------------------------------------------
void GetCmosDate(CmosDate* d)
{
if (d) {
d->dayofweek =ReadCmos(6);
d->day =ReadCmos(7);
d->month =ReadCmos(8);
d->year = ReadCmos(9);
}
BCD_TO_BIN(d->day);
BCD_TO_BIN(d->month);
BCD_TO_BIN(d->year);
d->year+=2000;
}
开发者ID:huashengshuita,项目名称:HITCS-30--FAT32-For-Linux0.11,代码行数:19,代码来源:Timer.c
示例7: set_rtc_mmss
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
* ms after the second nowtime has started, because when nowtime is written
* into the registers of the CMOS clock, it will jump to the next second
* precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
* sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
static int set_rtc_mmss(unsigned long nowtime)
{
unsigned char save_control, save_freq_select;
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
/* gets recalled with irq locally disabled */
spin_lock(&rtc_lock);
save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
* set */
CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
* prescaler */
CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
BCD_TO_BIN(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
/* correct for half hour time zone */
real_minutes += 30;
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(real_seconds);
BIN_TO_BCD(real_minutes);
}
CMOS_WRITE(real_seconds, RTC_SECONDS);
CMOS_WRITE(real_minutes, RTC_MINUTES);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock(&rtc_lock);
return retval;
}
开发者ID:274914765,项目名称:C,代码行数:70,代码来源:rtc.c
示例8: __initfunc
__initfunc(int rtc_init(void))
{
unsigned long flags;
#ifdef __alpha__
unsigned int year, ctrl;
unsigned long uip_watchdog;
char *guess = NULL;
#endif
printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
if(request_irq(RTC_IRQ, rtc_interrupt, SA_INTERRUPT, "rtc", NULL))
{
/* Yeah right, seeing as irq 8 doesn't even hit the bus. */
printk(KERN_ERR "rtc: IRQ %d is not free.\n", RTC_IRQ);
return -EIO;
}
misc_register(&rtc_dev);
/* Check region? Naaah! Just snarf it up. */
request_region(RTC_PORT(0), RTC_IO_EXTENT, "rtc");
#ifdef __alpha__
rtc_freq = HZ;
/* Each operating system on an Alpha uses its own epoch.
Let's try to guess which one we are using now. */
uip_watchdog = jiffies;
if (rtc_is_updating() != 0)
while (jiffies - uip_watchdog < 2*HZ/100)
barrier();
save_flags(flags);
cli();
year = CMOS_READ(RTC_YEAR);
ctrl = CMOS_READ(RTC_CONTROL);
restore_flags(flags);
if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
BCD_TO_BIN(year); /* This should never happen... */
if (year > 10 && year < 44) {
epoch = 1980;
guess = "ARC console";
} else if (year < 96) {
epoch = 1952;
guess = "Digital UNIX";
}
if (guess)
printk("rtc: %s epoch (%lu) detected\n", guess, epoch);
#endif
init_timer(&rtc_irq_timer);
rtc_irq_timer.function = rtc_dropped_irq;
rtc_wait = NULL;
save_flags(flags);
cli();
/* Initialize periodic freq. to CMOS reset default, which is 1024Hz */
CMOS_WRITE(((CMOS_READ(RTC_FREQ_SELECT) & 0xF0) | 0x06), RTC_FREQ_SELECT);
restore_flags(flags);
rtc_freq = 1024;
return 0;
}
开发者ID:chinnyannieb,项目名称:empeg-hijack,代码行数:59,代码来源:rtc.c
示例9: getDate
/*==========================================================================
FUNCTION:DS3231 driver
PURPOSE:
---------------------------------------------------------------------------*/
bool Crtc::getDate(u16* year, u08* mon, u08* day, u08* hour, u08* min) {
u08 buf[0x12];
// send address
buf[0] = 0x00;
i2c->masterSend(rtc_id, 1, buf);
// get the data
i2c->masterReceive(rtc_id, 7, buf);
//datetime.sec = BCD_TO_BIN (buf[0] & 0x7F);
*min = BCD_TO_BIN (buf[1] & 0x7F);
*hour = BCD_TO_BIN (buf[2] & 0x3F);
//*wday = (buf[3]) & 0x7; //1--7
*day = BCD_TO_BIN (buf[4] & 0x3F); //01--31
*mon = BCD_TO_BIN (buf[5] & 0x1F);
*year = BCD_TO_BIN (buf[6]) + 2000; /* byte*/
return true;
}
开发者ID:woutercloete,项目名称:cableguard,代码行数:21,代码来源:MCP7940x.cpp
示例10: evm_read_time
static int evm_read_time(struct device *dev, struct rtc_time *tm)
{
char rtcdata [9];
rtcdata[0] = 2;
rtcdata[1] = 1;
davinci_i2c_write(2, rtcdata, 0x23);
msleep(1);
davinci_i2c_read(9, rtcdata, 0x23);
msleep(1);
/* FIXME the RTC reports 12-hour time, without an AM/PM indicator,
* but Linux requires that we report 24 hour time...
*/
tm->tm_year = BCD_TO_BIN(rtcdata[3]) * 100
+ BCD_TO_BIN(rtcdata[2])
- 1900;
tm->tm_mon = BCD_TO_BIN(rtcdata[4]);
tm->tm_mday = BCD_TO_BIN(rtcdata[5]);
tm->tm_hour = BCD_TO_BIN(rtcdata[6]);
tm->tm_min = BCD_TO_BIN(rtcdata[7]);
tm->tm_sec = BCD_TO_BIN(rtcdata[8]);
return 0;
}
开发者ID:mrtos,项目名称:Logitech-Revue,代码行数:27,代码来源:rtc-davinci-evm.c
示例11: get_swarm_time
static unsigned long __init get_swarm_time(void)
{
unsigned int year, mon, day, hour, min, sec, y2k;
sec = xicor_read(X1241REG_SC);
min = xicor_read(X1241REG_MN);
hour = xicor_read(X1241REG_HR);
if (hour & X1241REG_HR_MIL) {
hour &= 0x3f;
} else {
if (hour & 0x20)
hour = (hour & 0xf) + 0x12;
}
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
day = xicor_read(X1241REG_DT);
mon = xicor_read(X1241REG_MO);
year = xicor_read(X1241REG_YR);
y2k = xicor_read(X1241REG_Y2K);
BCD_TO_BIN(day);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
BCD_TO_BIN(y2k);
year += (y2k * 100);
return mktime(year, mon, day, hour, min, sec);
}
开发者ID:TKr,项目名称:Wive-ng-rt8186,代码行数:33,代码来源:time.c
示例12: pcf8563_read
INT8S pcf8563_read(TIME* ptime)
{
INT8U time_ram[10];
INT8U sub_addr, mode, year;
if(NULL == ptime){
return -1;
}
mode = 1;
sub_addr = 0x02;
if(IRcvStr(PCF8563_I2C_PORT, 0xA2, sub_addr, mode, time_ram, 7) == false){
return -1;
}
ptime->second = BCD_TO_BIN(time_ram[0] & 0x7F);
ptime->minute = BCD_TO_BIN(time_ram[1] & 0x7F);
ptime->hour = BCD_TO_BIN(time_ram[2] & 0x3F);
ptime->day = BCD_TO_BIN(time_ram[3] & 0x3F);
ptime->week = BCD_TO_BIN(time_ram[4] & 0x07);
ptime->month = BCD_TO_BIN(time_ram[5] & 0x1F);
// йю╪меп╤о
if(time_ram[5]&(0x80)){
ptime->year = 1900;
}else{
ptime->year = 2000;
}
year = BCD_TO_BIN(time_ram[6]);
ptime->year += year;
return 0;
}
开发者ID:postgetme,项目名称:crco,代码行数:34,代码来源:pcf8563.c
示例13: pcf8583_get_datetime
static int
pcf8583_get_datetime(struct i2c_client *client, struct rtc_tm *dt)
{
unsigned char buf[8], addr[1] = { 1 };
struct i2c_msg msgs[2] = {
{ client->addr, 0, 1, addr },
{ client->addr, I2C_M_RD, 6, buf }
};
int ret = -EIO;
memset(buf, 0, sizeof(buf));
ret = i2c_transfer(client->adapter, msgs, 2);
if (ret == 2) {
dt->year_off = buf[4] >> 6;
dt->wday = buf[5] >> 5;
buf[4] &= 0x3f;
buf[5] &= 0x1f;
dt->cs = BCD_TO_BIN(buf[0]);
dt->secs = BCD_TO_BIN(buf[1]);
dt->mins = BCD_TO_BIN(buf[2]);
dt->hours = BCD_TO_BIN(buf[3]);
dt->mday = BCD_TO_BIN(buf[4]);
dt->mon = BCD_TO_BIN(buf[5]);
ret = 0;
}
开发者ID:sarnobat,项目名称:knoppix,代码行数:29,代码来源:pcf8583.c
示例14: time_init
static void time_init(void)
{
struct mktime time;
int i;
for (i = 0 ; i < 1000000 ; i++)
if (!(CMOS_READ(10) & 0x80))
break;
do {
time.sec = CMOS_READ(0);
time.min = CMOS_READ(2);
time.hour = CMOS_READ(4);
time.day = CMOS_READ(7);
time.mon = CMOS_READ(8);
time.year = CMOS_READ(9);
} while (time.sec != CMOS_READ(0));
BCD_TO_BIN(time.sec);
BCD_TO_BIN(time.min);
BCD_TO_BIN(time.hour);
BCD_TO_BIN(time.day);
BCD_TO_BIN(time.mon);
BCD_TO_BIN(time.year);
time.mon--;
startup_time = kernel_mktime(&time);
}
开发者ID:LambdaCalculus379,项目名称:SLS-1.02,代码行数:25,代码来源:main.c
示例15: maple_get_rtc_time
void maple_get_rtc_time(struct rtc_time *tm)
{
do {
tm->tm_sec = maple_clock_read(RTC_SECONDS);
tm->tm_min = maple_clock_read(RTC_MINUTES);
tm->tm_hour = maple_clock_read(RTC_HOURS);
tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH);
tm->tm_mon = maple_clock_read(RTC_MONTH);
tm->tm_year = maple_clock_read(RTC_YEAR);
} while (tm->tm_sec != maple_clock_read(RTC_SECONDS));
if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY)
|| RTC_ALWAYS_BCD) {
BCD_TO_BIN(tm->tm_sec);
BCD_TO_BIN(tm->tm_min);
BCD_TO_BIN(tm->tm_hour);
BCD_TO_BIN(tm->tm_mday);
BCD_TO_BIN(tm->tm_mon);
BCD_TO_BIN(tm->tm_year);
}
if ((tm->tm_year + 1900) < 1970)
tm->tm_year += 100;
GregorianDay(tm);
}
开发者ID:BackupTheBerlios,项目名称:arp2-svn,代码行数:25,代码来源:time.c
示例16: get_rtc_time
void
get_rtc_time(struct rtc_time *rtc_tm)
{
unsigned long flags;
local_irq_save(flags);
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
rtc_tm->tm_hour = CMOS_READ(RTC_HOURS);
rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
rtc_tm->tm_mon = CMOS_READ(RTC_MONTH);
rtc_tm->tm_year = CMOS_READ(RTC_YEAR);
local_irq_restore(flags);
BCD_TO_BIN(rtc_tm->tm_sec);
BCD_TO_BIN(rtc_tm->tm_min);
BCD_TO_BIN(rtc_tm->tm_hour);
BCD_TO_BIN(rtc_tm->tm_mday);
BCD_TO_BIN(rtc_tm->tm_mon);
BCD_TO_BIN(rtc_tm->tm_year);
/*
* Account for differences between how the RTC uses the values
* and how they are defined in a struct rtc_time;
*/
if (rtc_tm->tm_year <= 69)
rtc_tm->tm_year += 100;
rtc_tm->tm_mon--;
}
开发者ID:ManiacTwister,项目名称:linux-hnd,代码行数:33,代码来源:ds1302.c
示例17: get_rtc_time
void
get_rtc_time(struct rtc_time *tm)
{
tm->tm_sec = rtc_read(RTC_SECONDS);
tm->tm_min = rtc_read(RTC_MINUTES);
tm->tm_hour = rtc_read(RTC_HOURS);
tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
tm->tm_mon = rtc_read(RTC_MONTH);
tm->tm_year = rtc_read(RTC_YEAR);
if (tm->tm_sec & 0x80)
printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
tm->tm_sec &= 0x7f;
tm->tm_min &= 0x7f;
tm->tm_hour &= 0x3f;
tm->tm_mday &= 0x3f;
tm->tm_mon &= 0x1f;
BCD_TO_BIN(tm->tm_sec);
BCD_TO_BIN(tm->tm_min);
BCD_TO_BIN(tm->tm_hour);
BCD_TO_BIN(tm->tm_mday);
BCD_TO_BIN(tm->tm_mon);
tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
}
开发者ID:12019,项目名称:hg556a_source,代码行数:27,代码来源:pcf8563.c
示例18: get_m48t35_time
static __init unsigned long get_m48t35_time(void)
{
unsigned int year, month, date, hour, min, sec;
struct m48t35_rtc *rtc;
nasid_t nid;
nid = get_nasid();
rtc = (struct m48t35_rtc *)(KL_CONFIG_CH_CONS_INFO(nid)->memory_base +
IOC3_BYTEBUS_DEV0);
spin_lock(&rtc_lock);
rtc->control |= M48T35_RTC_READ;
sec = rtc->sec;
min = rtc->min;
hour = rtc->hour;
date = rtc->date;
month = rtc->month;
year = rtc->year;
rtc->control &= ~M48T35_RTC_READ;
spin_unlock(&rtc_lock);
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
BCD_TO_BIN(date);
BCD_TO_BIN(month);
BCD_TO_BIN(year);
year += 1970;
return mktime(year, month, date, hour, min, sec);
}
开发者ID:Picture-Elements,项目名称:linux-2.4-peijse,代码行数:32,代码来源:ip27-timer.c
示例19: get_rtc_time
void
get_rtc_time(struct rtc_time *tm)
{
tm->tm_sec = rtc_read(RTC_SECONDS);
tm->tm_min = rtc_read(RTC_MINUTES);
tm->tm_hour = rtc_read(RTC_HOURS);
tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
tm->tm_wday = rtc_read(RTC_WEEKDAY);
tm->tm_mon = rtc_read(RTC_MONTH);
tm->tm_year = rtc_read(RTC_YEAR);
if (tm->tm_sec & 0x80)
printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
"information is no longer guaranteed!\n", PCF8563_NAME);
tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
tm->tm_sec &= 0x7F;
tm->tm_min &= 0x7F;
tm->tm_hour &= 0x3F;
tm->tm_mday &= 0x3F;
tm->tm_wday &= 0x07; /* Not coded in BCD. */
tm->tm_mon &= 0x1F;
BCD_TO_BIN(tm->tm_sec);
BCD_TO_BIN(tm->tm_min);
BCD_TO_BIN(tm->tm_hour);
BCD_TO_BIN(tm->tm_mday);
BCD_TO_BIN(tm->tm_mon);
tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
}
开发者ID:Broadcom,项目名称:stblinux-2.6.18,代码行数:30,代码来源:pcf8563.c
示例20: GetBootTime
uint32 GetBootTime (void)
{
uint32 i;
struct Tm tm;
for (i=0; i <10000000; i++)
if ((CMOS_READ (CMOS_CTRL_REG_A) & RTC_UIP) == 0)
break;
tm.sec = CMOS_READ (CMOS_SECONDS);
tm.min = CMOS_READ (CMOS_MINUTES);
tm.hour = CMOS_READ (CMOS_HOURS);
tm.mday = CMOS_READ (CMOS_DATE_OF_MONTH);
tm.mon = CMOS_READ (CMOS_MONTH);
tm.year = CMOS_READ (CMOS_YEAR);
if (!(CMOS_READ (CMOS_CTRL_REG_B) & RTC_DM_BINARY))
{
BCD_TO_BIN (tm.sec);
BCD_TO_BIN (tm.min);
BCD_TO_BIN (tm.hour);
BCD_TO_BIN (tm.mday);
BCD_TO_BIN (tm.mon);
BCD_TO_BIN (tm.year);
}
if ((tm.year += 1900) < 1970)
tm.year += 100;
tm.year -= 1900;
tm.mon -=1;
return MakeTime(&tm);
}
开发者ID:cod5,项目名称:kielder,代码行数:34,代码来源:boottime.c
注:本文中的BCD_TO_BIN函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论