C++ BCM_DEBUG_PRINT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BCM_DEBUG_PRINT函数的典型用法代码示例。如果您正苦于以下问题：C++ BCM_DEBUG_PRINT函数的具体用法？C++ BCM_DEBUG_PRINT怎么用？C++ BCM_DEBUG_PRINT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BCM_DEBUG_PRINT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: usbbcm_disconnect

static void usbbcm_disconnect (struct usb_interface *intf)
{
	PS_INTERFACE_ADAPTER psIntfAdapter = NULL;
	PMINI_ADAPTER psAdapter = NULL;
	struct usb_device       *udev = NULL;
    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);	

	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Usb disconnected");
	if(intf == NULL)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "intf pointer is NULL");
		return;
	}
	psIntfAdapter = usb_get_intfdata(intf);
	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "psIntfAdapter 0x%x",(unsigned int)psIntfAdapter);
	if(psIntfAdapter == NULL)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "InterfaceAdapter pointer is NULL");
		return;
	}
	psAdapter = psIntfAdapter->psAdapter;
	if(psAdapter->bDoSuspend)
		intf->needs_remote_wakeup = 0;
		
	psAdapter->device_removed = TRUE ;
	usb_set_intfdata(intf, NULL);	
	InterfaceAdapterFree(psIntfAdapter);
	udev = interface_to_usbdev (intf);
	usb_put_dev(udev);
	usb_deregister_dev (intf, &usbbcm_class);
}

开发者ID:aircross，项目名称:ray，代码行数:31，代码来源:InterfaceInit.c

示例2: putUsbSuspend

VOID putUsbSuspend(struct work_struct *work)
{
	PS_INTERFACE_ADAPTER psIntfAdapter = NULL ;
	struct usb_interface *intf = NULL ;
	psIntfAdapter = container_of(work, S_INTERFACE_ADAPTER,usbSuspendWork);
	intf=psIntfAdapter->interface ;
		
	if(psIntfAdapter->bSuspended == FALSE) 
	{
		usb_autopm_put_interface(intf);
		if(intf->is_active == 0)	
		{
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Interface Suspend Completely\n");
		}
		else
		{
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"Interface suspend failed..");
		}
		
	}
	else
	{
		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Interface Resumed Completely\n");
	}
	
}

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:26，代码来源:InterfaceMisc.c

示例3: AllocUsbCb

static __inline int AllocUsbCb(PS_INTERFACE_ADAPTER psIntfAdapter)
{
	int i = 0;
	for(i = 0; i < MAXIMUM_USB_TCB; i++)
	{
		if((psIntfAdapter->asUsbTcb[i].urb =	
				usb_alloc_urb(0, GFP_KERNEL)) == NULL)
		{
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Cant allocate Tx urb for index %d", i);
			return -ENOMEM;
		}
	}

	for(i = 0; i < MAXIMUM_USB_RCB; i++)
	{
		if ((psIntfAdapter->asUsbRcb[i].urb = 
				usb_alloc_urb(0, GFP_KERNEL)) == NULL) 
		{
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Cant allocate Rx urb for index %d", i);
			return -ENOMEM;
		}
		if((psIntfAdapter->asUsbRcb[i].urb->transfer_buffer = 
			kmalloc(MAX_DATA_BUFFER_SIZE, GFP_KERNEL)) == NULL)                 
		{
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Cant allocate Rx buffer for index %d", i);
			return -ENOMEM;		
		}
		psIntfAdapter->asUsbRcb[i].urb->transfer_buffer_length = MAX_DATA_BUFFER_SIZE;		
	}
	return 0;
}

开发者ID:aircross，项目名称:ray，代码行数:31，代码来源:InterfaceInit.c

示例4: UpdateClassifierPHSRule

static UINT UpdateClassifierPHSRule(IN B_UINT16  uiClsId,
      IN S_CLASSIFIER_ENTRY *pstClassifierEntry,
      S_CLASSIFIER_TABLE *psaClassifiertable ,S_PHS_RULE *psPhsRule,
      B_UINT8 u8AssociatedPHSI)
{
	S_PHS_RULE *pstAddPhsRule = NULL;
	UINT              nPhsRuleIndex = 0;
	BOOLEAN       bPHSRuleOrphaned = FALSE;
	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
	psPhsRule->u8RefCnt =0;

	/* Step 1 Deref Any Exisiting PHS Rule in this classifier Entry*/
	bPHSRuleOrphaned = DerefPhsRule( uiClsId, psaClassifiertable,
	    pstClassifierEntry->pstPhsRule);

	//Step 2 Search if there is a PHS Rule with u8AssociatedPHSI in Classifier table for this SF
	nPhsRuleIndex =GetPhsRuleEntry(psaClassifiertable,u8AssociatedPHSI,
	    eActiveClassifierRuleContext, &pstAddPhsRule);
	if(PHS_INVALID_TABLE_INDEX == nPhsRuleIndex)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_DISPATCH, DBG_LVL_ALL, "\nAdding New PHSRuleEntry For Classifier");

		if(psPhsRule->u8PHSI == 0)
		{
			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_DISPATCH, DBG_LVL_ALL, "\nError PHSI is Zero\n");
			return ERR_PHS_INVALID_PHS_RULE;
		}
		//Step 2.a PHS Rule Does Not Exist .Create New PHS Rule for uiClsId
		if(FALSE == bPHSRuleOrphaned)
		{
			pstClassifierEntry->pstPhsRule = kmalloc(sizeof(S_PHS_RULE), GFP_KERNEL);
			if(NULL == pstClassifierEntry->pstPhsRule)
			{
				return ERR_PHSRULE_MEMALLOC_FAIL;
			}
		}
		memcpy(pstClassifierEntry->pstPhsRule, psPhsRule, sizeof(S_PHS_RULE));

	}
	else
	{
		//Step 2.b PHS Rule  Exists Tie uiClsId with the existing PHS Rule
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_DISPATCH, DBG_LVL_ALL, "\nTying Classifier to Existing PHS Rule");
		if(bPHSRuleOrphaned)
		{
			kfree(pstClassifierEntry->pstPhsRule);
			pstClassifierEntry->pstPhsRule = NULL;
		}
		pstClassifierEntry->pstPhsRule = pstAddPhsRule;

	}
	pstClassifierEntry->bUsed = TRUE;
	pstClassifierEntry->u8PHSI = pstClassifierEntry->pstPhsRule->u8PHSI;
	pstClassifierEntry->uiClassifierRuleId = uiClsId;
	pstClassifierEntry->pstPhsRule->u8RefCnt++;
	pstClassifierEntry->bUnclassifiedPHSRule = pstClassifierEntry->pstPhsRule->bUnclassifiedPHSRule;

	return PHS_SUCCESS;

}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:60，代码来源:PHSModule.c

示例5: buffRdbkVerify

static INT buffRdbkVerify(struct bcm_mini_adapter *Adapter, PUCHAR mappedbuffer, UINT u32FirmwareLength, ULONG u32StartingAddress)
{
	UINT len = u32FirmwareLength;
	INT retval = STATUS_SUCCESS;
	PUCHAR readbackbuff = kzalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_KERNEL);
	int bytes;

	if (NULL == readbackbuff) {
		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "MEMORY ALLOCATION FAILED");
		return -ENOMEM;
	}

	while (u32FirmwareLength && !retval) {
		len = MIN_VAL(u32FirmwareLength, MAX_TRANSFER_CTRL_BYTE_USB);
		bytes = rdm(Adapter, u32StartingAddress, readbackbuff, len);

		if (bytes < 0) {
			retval = bytes;
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "rdm failed with status %d", retval);
			break;
		}

		retval = bcm_compare_buff_contents(readbackbuff, mappedbuffer, len);
		if (STATUS_SUCCESS != retval)
			break;

		u32StartingAddress += len;
		u32FirmwareLength -= len;
		mappedbuffer += len;

	} /* end of while (u32FirmwareLength && !retval) */
	kfree(readbackbuff);
	return retval;
}

开发者ID:ARMWorks，项目名称:FA_2451_Linux_Kernel，代码行数:34，代码来源:InterfaceDld.c

示例6: InterruptOut

int InterruptOut(PMINI_ADAPTER Adapter, PUCHAR pData)
{
    
    int 	status = STATUS_SUCCESS;
	int 	lenwritten = 0;
    PS_INTERFACE_ADAPTER psInterfaceAdapter = Adapter->pvInterfaceAdapter;
    
    if( FALSE == Adapter->bShutStatus &&
		FALSE == Adapter->IdleMode &&
		FALSE == Adapter->bPreparingForLowPowerMode &&
        FALSE == Adapter->device_removed)   
    {

	    status = usb_interrupt_msg (psInterfaceAdapter->udev, 
			     usb_sndintpipe(psInterfaceAdapter->udev,
            	 psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
       			 pData, 
		    	 8, 
			     &lenwritten, 
			     5000);
    }
	if(status)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending clear pattern down fails with status:%d..\n",status);
		return status;
	}
	else
	{
	    BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);	
        return STATUS_SUCCESS;
	}


} /* InterruptOut() */

开发者ID:3sOx，项目名称:asuswrt-merlin，代码行数:34，代码来源:InterfaceMisc.c

示例7: Zero

/**
@ingroup tx_functions
This function despatches packet from the specified queue.
@return Zero(success) or Negative value(failure)
*/
static INT SendPacketFromQueue(struct bcm_mini_adapter *Adapter,/**<Logical Adapter*/
			struct bcm_packet_info *psSF, /**<Queue identifier*/
			       struct sk_buff *Packet)	/**<Pointer to the packet to be sent*/
{
	INT Status = STATUS_FAILURE;
	UINT uiIndex = 0, PktLen = 0;

	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, SEND_QUEUE, DBG_LVL_ALL, "=====>");
	if (!Adapter || !Packet || !psSF) {
		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, SEND_QUEUE, DBG_LVL_ALL, "Got NULL Adapter or Packet");
		return -EINVAL;
	}

	if (psSF->liDrainCalculated == 0)
		psSF->liDrainCalculated = jiffies;
	/* send the packet to the fifo.. */
	PktLen = Packet->len;
	Status = SetupNextSend(Adapter, Packet, psSF->usVCID_Value);
	if (Status == 0) {
		for (uiIndex = 0; uiIndex < MIBS_MAX_HIST_ENTRIES; uiIndex++) {
			if ((PktLen <= MIBS_PKTSIZEHIST_RANGE*(uiIndex+1)) && (PktLen > MIBS_PKTSIZEHIST_RANGE*(uiIndex)))
				Adapter->aTxPktSizeHist[uiIndex]++;
		}
	}
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, SEND_QUEUE, DBG_LVL_ALL, "<=====");
	return Status;
}

开发者ID:AeroGirl，项目名称:VAR-SOM-AM33-SDK7-Kernel，代码行数:32，代码来源:LeakyBucket.c

示例8: InterfaceSuspend

int InterfaceSuspend (struct usb_interface *intf, pm_message_t message)
{
	PS_INTERFACE_ADAPTER  psIntfAdapter = usb_get_intfdata(intf);
	BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "=================================\n");
	//Bcm_kill_all_URBs(psIntfAdapter);
	psIntfAdapter->bSuspended = TRUE;

	if(TRUE == psIntfAdapter->bPreparingForBusSuspend)
	{
		psIntfAdapter->bPreparingForBusSuspend = FALSE;

		if(psIntfAdapter->psAdapter->LinkStatus == LINKUP_DONE)
		{
			psIntfAdapter->psAdapter->IdleMode = TRUE ;
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Host Entered in PMU Idle Mode..");	
		}
		else
		{
			psIntfAdapter->psAdapter->bShutStatus = TRUE;
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Host Entered in PMU Shutdown Mode..");	
		}
	}
	psIntfAdapter->psAdapter->bPreparingForLowPowerMode = FALSE;
	
	//Signaling the control pkt path
	wake_up(&psIntfAdapter->psAdapter->lowpower_mode_wait_queue);
	
	return 0;
}

开发者ID:aircross，项目名称:ray，代码行数:29，代码来源:InterfaceInit.c

示例9: GetSFTokenCount

static ULONG GetSFTokenCount(PMINI_ADAPTER Adapter, PacketInfo *psSF)
{
	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "IsPacketAllowedForFlow ===>");
	
	if(NULL == Adapter || (psSF < Adapter->PackInfo &&
		(uintptr_t)psSF > (uintptr_t) &Adapter->PackInfo[HiPriority]))
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "IPAFF: Got wrong Parameters:Adapter: %p, QIndex: %zd\n", Adapter, (psSF-Adapter->PackInfo));
		return 0;
	}

	if(FALSE != psSF->bValid && psSF->ucDirection)
	{
		if(0 != psSF->uiCurrentTokenCount)
		{
				return psSF->uiCurrentTokenCount;
		}
		else
		{
			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "Not enough tokens in queue %zd Available %u\n",
				psSF-Adapter->PackInfo, psSF->uiCurrentTokenCount);
			psSF->uiPendedLast = 1;
		}
	}
	else
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "IPAFF: Queue %zd not valid\n", psSF-Adapter->PackInfo);
	}
	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TOKEN_COUNTS, DBG_LVL_ALL, "IsPacketAllowedForFlow <===");
	return 0;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:31，代码来源:LeakyBucket.c

示例10: InterfaceHandleShutdownModeWakeup

void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
{
	unsigned int uiRegVal = 0;
	INT Status = 0;
	int bytes;

	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
		/* clear idlemode interrupt. */
		uiRegVal = 0;
		Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
		if (Status) {
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
			return;
		}
	}

    else {

        /* clear Interrupt EP registers. */
		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
		if (bytes < 0) {
			Status = bytes;
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
			return;
		}

		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
		if (bytes < 0) {
			Status = bytes;
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
			return;
		}
	}
}

开发者ID:AeroGirl，项目名称:VAR-SOM-AM33-SDK7-Kernel，代码行数:34，代码来源:InterfaceIdleMode.c

示例11: SendPacketFromQueue

static INT SendPacketFromQueue(PMINI_ADAPTER Adapter,
			       PacketInfo *psSF,		
			       struct sk_buff*  Packet)	
{
	INT  	Status=STATUS_FAILURE;
	UINT uiIndex =0,PktLen = 0;

	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, SEND_QUEUE, DBG_LVL_ALL, "=====>");
	if(!Adapter || !Packet || !psSF)
	{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, SEND_QUEUE, DBG_LVL_ALL, "Got NULL Adapter or Packet");
		return -EINVAL;
	}

	if(psSF->liDrainCalculated==0)
	{
		psSF->liDrainCalculated = jiffies;
	}
	
	PktLen = Packet->len;
	Status = SetupNextSend(Adapter, Packet, psSF->usVCID_Value);
	if(Status == 0)
	{
		for(uiIndex = 0 ; uiIndex < MIBS_MAX_HIST_ENTRIES ; uiIndex++)
		{	if((PktLen <= MIBS_PKTSIZEHIST_RANGE*(uiIndex+1)) && (PktLen > MIBS_PKTSIZEHIST_RANGE*(uiIndex)))
				Adapter->aTxPktSizeHist[uiIndex]++;
		}
	}
	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, SEND_QUEUE, DBG_LVL_ALL, "<=====");
	return Status;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:31，代码来源:LeakyBucket.c

示例12: phs_decompress

int phs_decompress(unsigned char *in_buf,unsigned char *out_buf,
 S_PHS_RULE   *decomp_phs_rules,UINT *header_size)
{
	int phss,size=0;
	 S_PHS_RULE   *tmp_memb;
	int bit,i=0;
	unsigned char *phsf,*phsm;
	int in_buf_len = *header_size-1;
	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
	in_buf++;
    BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_RECEIVE,DBG_LVL_ALL,"====>\n");
	*header_size = 0;

	if((decomp_phs_rules == NULL ))
		return 0;


	tmp_memb = decomp_phs_rules;
	//BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_RECEIVE,DBG_LVL_ALL,"\nDECOMP:In phs_decompress PHSI 1  %d",phsi));
	//*header_size = tmp_memb->u8PHSFLength;
	phss         = tmp_memb->u8PHSS;
	phsf         = tmp_memb->u8PHSF;
	phsm         = tmp_memb->u8PHSM;

	if(phss > MAX_PHS_LENGTHS)
		phss = MAX_PHS_LENGTHS;
	//BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_RECEIVE,DBG_LVL_ALL,"\nDECOMP:In phs_decompress PHSI  %d phss %d index %d",phsi,phss,index));
	while((phss > 0) && (size < in_buf_len))
	{
		bit =  ((*phsm << i)& SUPPRESS);

		if(bit == SUPPRESS)
		{
			*out_buf = *phsf;
			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_RECEIVE,DBG_LVL_ALL,"\nDECOMP:In phss  %d phsf %d ouput %d",
              phss,*phsf,*out_buf);
		}
		else
		{
			*out_buf = *in_buf;
			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_RECEIVE,DBG_LVL_ALL,"\nDECOMP:In phss  %d input %d ouput %d",
            phss,*in_buf,*out_buf);
			in_buf++;
			size++;
		}
		out_buf++;
		phsf++;
		phss--;
		i++;
		*header_size=*header_size + 1;

		if(i > MAX_NO_BIT)
		{
			i=0;
			phsm++;
		}
	}
	return size;
}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:59，代码来源:PHSModule.c

示例13: tx_pkt_handler

/**
 * @ingroup tx_functions
 * Transmit thread
 */
int tx_pkt_handler(struct bcm_mini_adapter *Adapter /**< pointer to adapter object*/)
{
	int status = 0;

	while (!kthread_should_stop()) {
		/* FIXME - the timeout looks like workaround for racey usage of TxPktAvail */
		if (Adapter->LinkUpStatus)
			wait_event_timeout(Adapter->tx_packet_wait_queue,
					tx_pending(Adapter), msecs_to_jiffies(10));
		else
			wait_event_interruptible(Adapter->tx_packet_wait_queue,
						tx_pending(Adapter));

		if (Adapter->device_removed)
			break;

		if (Adapter->downloadDDR == 1) {
			Adapter->downloadDDR += 1;
			status = download_ddr_settings(Adapter);
			if (status)
				pr_err(PFX "DDR DOWNLOAD FAILED! %d\n", status);
			continue;
		}

		/* Check end point for halt/stall. */
		if (Adapter->bEndPointHalted == TRUE) {
			Bcm_clear_halt_of_endpoints(Adapter);
			Adapter->bEndPointHalted = FALSE;
			StartInterruptUrb((PS_INTERFACE_ADAPTER)(Adapter->pvInterfaceAdapter));
		}

		if (Adapter->LinkUpStatus && !Adapter->IdleMode) {
			if (atomic_read(&Adapter->TotalPacketCount))
				update_per_sf_desc_cnts(Adapter);
		}

		if (atomic_read(&Adapter->CurrNumFreeTxDesc) &&
			Adapter->LinkStatus == SYNC_UP_REQUEST &&
			!Adapter->bSyncUpRequestSent) {

			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "Calling LinkMessage");
			LinkMessage(Adapter);
		}

		if ((Adapter->IdleMode || Adapter->bShutStatus) && atomic_read(&Adapter->TotalPacketCount)) {
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "Device in Low Power mode...waking up");
			Adapter->usIdleModePattern = ABORT_IDLE_MODE;
			Adapter->bWakeUpDevice = TRUE;
			wake_up(&Adapter->process_rx_cntrlpkt);
		}

		transmit_packets(Adapter);
		atomic_set(&Adapter->TxPktAvail, 0);
	}

	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "Exiting the tx thread..\n");
	Adapter->transmit_packet_thread = NULL;
	return 0;
}

开发者ID:AllenDou，项目名称:linux，代码行数:63，代码来源:Transmit.c

示例14: MatchDestIpv6Address

static BOOLEAN MatchDestIpv6Address(struct bcm_classifier_rule *pstClassifierRule,
	IPV6Header *pstIpv6Header)
{
	UINT uiLoopIndex = 0;
	UINT uiIpv6AddIndex = 0;
	UINT uiIpv6AddrNoLongWords = 4;
	ULONG aulDestIP[4];
	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
	/*
	 * This is the no. of Destination Addresses
	 * ie Range of IP Addresses contained in the classifier rule
	 * for which we need to match
	 */
	UINT  uiCountIPDestinationAddresses = (UINT)pstClassifierRule->ucIPDestinationAddressLength;


	if (uiCountIPDestinationAddresses == 0)
		return TRUE;


	/* First Convert the Ip Address in the packet to Host Endian order */
	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
		aulDestIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);

	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPDestinationAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
				"\n Destination Ipv6 Address In Received Packet :\n ");
		DumpIpv6Address(aulDestIP);
		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
				"\n Destination Ipv6 Mask In Classifier Rule :\n");
		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
				"\n Destination Ipv6 Address In Classifier Rule :\n");
		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex]);

		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
			if ((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
				/*
				 * Match failed for current Ipv6 Address.
				 * Try next Ipv6 Address
				 */
				break;
			}

			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
				/* Match Found */
				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
						DBG_LVL_ALL,
						"Ipv6 Destination Ip Address Matched\n");
				return TRUE;
			}
		}
	}
	return FALSE;

}

开发者ID:ARMWorks，项目名称:FA_2451_Linux_Kernel，代码行数:57，代码来源:IPv6Protocol.c

示例15: control_packet_handler

/**
 * @ingroup ctrl_pkt_functions
 * Thread to handle control pkt reception
 */
int control_packet_handler(struct bcm_mini_adapter *Adapter /* pointer to adapter object*/)
{
	struct sk_buff *ctrl_packet = NULL;
	unsigned long flags = 0;
	/* struct timeval tv; */
	/* int *puiBuffer = NULL; */
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CP_CTRL_PKT, DBG_LVL_ALL,
		"Entering to make thread wait on control packet event!");
	while (1) {
		wait_event_interruptible(Adapter->process_rx_cntrlpkt,
			atomic_read(&Adapter->cntrlpktCnt) ||
			Adapter->bWakeUpDevice ||
			kthread_should_stop());


		if (kthread_should_stop()) {
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, CP_CTRL_PKT,
				DBG_LVL_ALL, "Exiting\n");
			return 0;
		}
		if (TRUE == Adapter->bWakeUpDevice) {
			Adapter->bWakeUpDevice = FALSE;
			if ((FALSE == Adapter->bTriedToWakeUpFromlowPowerMode)
					&& ((TRUE == Adapter->IdleMode) ||
					    (TRUE == Adapter->bShutStatus))) {
				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
					CP_CTRL_PKT, DBG_LVL_ALL,
					"Calling InterfaceAbortIdlemode\n");
				/*
				 * Adapter->bTriedToWakeUpFromlowPowerMode
				 *					= TRUE;
				 */
				InterfaceIdleModeWakeup(Adapter);
			}
			continue;
		}

		while (atomic_read(&Adapter->cntrlpktCnt)) {
			spin_lock_irqsave(&Adapter->control_queue_lock, flags);
			ctrl_packet = Adapter->RxControlHead;
			if (ctrl_packet) {
				DEQUEUEPACKET(Adapter->RxControlHead,
					Adapter->RxControlTail);
				/* Adapter->RxControlHead=ctrl_packet->next; */
			}

			spin_unlock_irqrestore(&Adapter->control_queue_lock,
						flags);
			handle_rx_control_packet(Adapter, ctrl_packet);
			atomic_dec(&Adapter->cntrlpktCnt);
		}

		SetUpTargetDsxBuffers(Adapter);
	}
	return STATUS_SUCCESS;
}

开发者ID:AD5GB，项目名称:kernel_n5_3.10-experimental，代码行数:60，代码来源:HandleControlPacket.c

示例16: TransmitTcb

static __inline int TransmitTcb(PS_INTERFACE_ADAPTER psIntfAdapter, PUSB_TCB pTcb, PVOID data, int len)
{

	struct urb *urb = pTcb->urb;
	int retval = 0;
	
#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35)
	urb->transfer_buffer = usb_buffer_alloc(psIntfAdapter->udev, len, 
#else
	urb->transfer_buffer = usb_alloc_coherent(psIntfAdapter->udev, len, 
#endif
						GFP_ATOMIC, &urb->transfer_dma);
	if (!urb->transfer_buffer) 
	{
		BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Error allocating memory\n");
		return  -ENOMEM;
	}
	memcpy(urb->transfer_buffer, data, len);
	urb->transfer_buffer_length = len;

	BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Sending Bulk out packet\n");
	//For T3B,INT OUT end point will be used as bulk out end point
	if((psIntfAdapter->psAdapter->chip_id == T3B) && (psIntfAdapter->bHighSpeedDevice == TRUE))
	{
		usb_fill_int_urb(urb, psIntfAdapter->udev,
	    	psIntfAdapter->sBulkOut.bulk_out_pipe,
			urb->transfer_buffer, len, write_bulk_callback, pTcb,
			psIntfAdapter->sBulkOut.int_out_interval);	
	}
	else
	{
	usb_fill_bulk_urb(urb, psIntfAdapter->udev,
		  psIntfAdapter->sBulkOut.bulk_out_pipe,
		  urb->transfer_buffer, len, write_bulk_callback, pTcb);	
	}	  
	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* For DMA transfer */

	if(FALSE == psIntfAdapter->psAdapter->device_removed &&
	   FALSE == psIntfAdapter->psAdapter->bEndPointHalted &&
	   FALSE == psIntfAdapter->bSuspended &&
	   FALSE == psIntfAdapter->bPreparingForBusSuspend)
	{
		retval = usb_submit_urb(urb, GFP_ATOMIC);
		if (retval) 
		{
			BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "failed submitting write urb, error %d", retval);
			if(retval == -EPIPE)
			{
				psIntfAdapter->psAdapter->bEndPointHalted = TRUE ;
				wake_up(&psIntfAdapter->psAdapter->tx_packet_wait_queue);
			}
		}
	}
	return retval;
}

开发者ID:aircross，项目名称:ray，代码行数:55，代码来源:InterfaceTx.c

示例17: DumpIpv6Header

static VOID DumpIpv6Header(IPV6Header *pstIpv6Header)
{
	UCHAR ucVersion;
	UCHAR ucPrio;
	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"----Ipv6 Header---");
	ucVersion = pstIpv6Header->ucVersionPrio & 0xf0;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Version : %x\n", ucVersion);
	ucPrio = pstIpv6Header->ucVersionPrio & 0x0f;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Priority : %x\n", ucPrio);
	/*
	 * BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
	 * "Flow Label : %x\n",(pstIpv6Header->ucVersionPrio &0xf0);
	 */
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Payload Length : %x\n",
			ntohs(pstIpv6Header->usPayloadLength));
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Next Header : %x\n", pstIpv6Header->ucNextHeader);
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Hop Limit : %x\n", pstIpv6Header->ucHopLimit);
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Src Address :\n");
	DumpIpv6Address(pstIpv6Header->ulSrcIpAddress);
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"Dest Address :\n");
	DumpIpv6Address(pstIpv6Header->ulDestIpAddress);
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
			"----Ipv6 Header End---");


}

开发者ID:ARMWorks，项目名称:FA_2451_Linux_Kernel，代码行数:35，代码来源:IPv6Protocol.c

示例18: verify_suppress_phsf

static int verify_suppress_phsf(unsigned char *in_buffer,unsigned char *out_buffer,
				unsigned char *phsf,unsigned char *phsm,unsigned int phss,
				unsigned int phsv,UINT* new_header_size)
{
	unsigned int size=0;
	int bit,i=0;
	struct bcm_mini_adapter *Adapter = GET_BCM_ADAPTER(gblpnetdev);
    BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_SEND, DBG_LVL_ALL,"\nCOMP:In verify_phsf PHSM - 0x%X",*phsm);


	if(phss>(*new_header_size))
	{
		phss=*new_header_size;
	}
	while(phss > 0)
	{
		bit = ((*phsm << i)& SUPPRESS);
		if(bit == SUPPRESS)
		{

			if(*in_buffer != *phsf)
			{
				if(phsv == VERIFY)
				{
					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_SEND, DBG_LVL_ALL,"\nCOMP:In verify_phsf failed for field  %d buf  %d phsf %d",phss,*in_buffer,*phsf);
					return STATUS_PHS_NOCOMPRESSION;
				}
			}
			else
				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_SEND, DBG_LVL_ALL,"\nCOMP:In verify_phsf success for field  %d buf  %d phsf %d",phss,*in_buffer,*phsf);
		}
		else
		{
			*out_buffer = *in_buffer;
			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_SEND, DBG_LVL_ALL,"\nCOMP:In copying_header input %d  out %d",*in_buffer,*out_buffer);
			out_buffer++;
			size++;
		}
		in_buffer++;
		phsf++;
		phss--;
		i++;
		if(i > MAX_NO_BIT)
		{
			i=0;
			phsm++;
		}
	}
	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, PHS_SEND, DBG_LVL_ALL,"\nCOMP:In verify_phsf success");
	*new_header_size = size;
	return STATUS_PHS_COMPRESSED;
}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:52，代码来源:PHSModule.c

示例19: MatchSrcIpv6Address

static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
{
	UINT uiLoopIndex=0;
	UINT  uiIpv6AddIndex=0;
	UINT  uiIpv6AddrNoLongWords = 4;
	ULONG aulSrcIP[4];
    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
	/*
	//This is the no. of Src Addresses ie Range of IP Addresses contained
	//in the classifier rule for which we need to match
	*/
	UINT  uiCountIPSrcAddresses = (UINT)pstClassifierRule->ucIPSourceAddressLength;


	if(0 == uiCountIPSrcAddresses)
		return TRUE;


	//First Convert the Ip Address in the packet to Host Endian order
	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
	{
		aulSrcIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);
	}

	for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
	{
		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
		DumpIpv6Address(aulSrcIP);
		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Classifier Rule : \n");
		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex]);

		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
		{
			if((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
			{
				//Match failed for current Ipv6 Address.Try next Ipv6 Address
				break;
			}

			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
			{
				//Match Found
				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Src Ip Address Matched\n");
				return TRUE;
			}
		}
	}
	return FALSE;
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:52，代码来源:IPv6Protocol.c

示例20: print_usb_interface_desc

static void	print_usb_interface_desc(struct usb_interface_descriptor *usb_intf_desc)
{
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "**************** INTERFACE DESCRIPTOR *********************");
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bLength: %x", usb_intf_desc->bLength);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bDescriptorType: %x", usb_intf_desc->bDescriptorType);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceNumber: %x", usb_intf_desc->bInterfaceNumber);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bAlternateSetting: %x", usb_intf_desc->bAlternateSetting);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bNumEndpoints: %x", usb_intf_desc->bNumEndpoints);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceClass: %x", usb_intf_desc->bInterfaceClass);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceSubClass: %x", usb_intf_desc->bInterfaceSubClass);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceProtocol: %x", usb_intf_desc->bInterfaceProtocol);
		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "iInterface :%x\n",usb_intf_desc->iInterface);
}

开发者ID:aircross，项目名称:ray，代码行数:13，代码来源:InterfaceInit.c

注：本文中的BCM_DEBUG_PRINT函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BCON_INT32函数代码示例发布时间：2022-05-30

C++ BCD_TO_BIN函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18341|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9706|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8195|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8563|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8474|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9417|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8446|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7878|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8430|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7405|2022-11-06

客服电话

电子邮件

C++ BCM_DEBUG_PRINT函数代码示例

示例1: usbbcm_disconnect

示例2: putUsbSuspend

示例3: AllocUsbCb

示例4: UpdateClassifierPHSRule

示例5: buffRdbkVerify

示例6: InterruptOut

示例7: Zero

示例8: InterfaceSuspend

示例9: GetSFTokenCount

示例10: InterfaceHandleShutdownModeWakeup

示例11: SendPacketFromQueue

示例12: phs_decompress

示例13: tx_pkt_handler

示例14: MatchDestIpv6Address

示例15: control_packet_handler

示例16: TransmitTcb

示例17: DumpIpv6Header

示例18: verify_suppress_phsf

示例19: MatchSrcIpv6Address

示例20: print_usb_interface_desc

请发表评论

全部评论

上一篇：

下一篇：

dphi-official/Machine_Learning_Bootcamp

juven/maven-bash-completion: Maven Bash

win7系统注册表编辑器打开的操作方法

CVE-2022-2550

route101/mastoinker: Quick image view as

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053