C++ HAL_UART_IRQHandler函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中HAL_UART_IRQHandler函数的典型用法代码示例。如果您正苦于以下问题：C++ HAL_UART_IRQHandler函数的具体用法？C++ HAL_UART_IRQHandler怎么用？C++ HAL_UART_IRQHandler使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了HAL_UART_IRQHandler函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: UART4_IRQHandler

/**
* @brief This function handles UART4 global interrupt.
*/
void UART4_IRQHandler(void)
{
  /* USER CODE BEGIN UART4_IRQn 0 */

  /* USER CODE END UART4_IRQn 0 */
  HAL_UART_IRQHandler(&huart4);
  /* USER CODE BEGIN UART4_IRQn 1 */

  /* USER CODE END UART4_IRQn 1 */
}

开发者ID:CynaCons，项目名称:stm32_BluTechDevice，代码行数:13，代码来源:stm32f1xx_it.c

示例2: USART3_IRQHandler

/**
* @brief This function handles USART3 global interrupt.
*/
void USART3_IRQHandler(void)
{
  /* USER CODE BEGIN USART3_IRQn 0 */

  /* USER CODE END USART3_IRQn 0 */
  HAL_UART_IRQHandler(&huart3);
  /* USER CODE BEGIN USART3_IRQn 1 */

  /* USER CODE END USART3_IRQn 1 */
}

开发者ID:csorvagep，项目名称:robotcar，代码行数:13，代码来源:stm32f4xx_it.c

示例3: UART4_IRQHandler

/**
* @brief This function handles UART4 global interrupt.
*/
void UART4_IRQHandler(void)
{
  /* USER CODE BEGIN UART4_IRQn 0 */
  SEGGER_SYSVIEW_RecordEnterISR();
  HAL_GPS_UART_IRQHandler(&huart4);
  /* USER CODE END UART4_IRQn 0 */
  HAL_UART_IRQHandler(&huart4);
  /* USER CODE BEGIN UART4_IRQn 1 */
  SEGGER_SYSVIEW_RecordEnterISR();
  /* USER CODE END UART4_IRQn 1 */
}

开发者ID:librespacefoundation，项目名称:upsat-adcs-software，代码行数:14，代码来源:stm32f4xx_it.c

示例4: USART2_IRQHandler

/**
* @brief This function handles USART2 global interrupt.
*/
void USART2_IRQHandler(void)
{
  /* USER CODE BEGIN USART2_IRQn 0 */
  SEGGER_SYSVIEW_RecordEnterISR();
  HAL_ADCS_UART_IRQHandler(&huart2);
  /* USER CODE END USART2_IRQn 0 */
  HAL_UART_IRQHandler(&huart2);
  /* USER CODE BEGIN USART2_IRQn 1 */
  SEGGER_SYSVIEW_RecordEnterISR();
  /* USER CODE END USART2_IRQn 1 */
}

开发者ID:librespacefoundation，项目名称:upsat-adcs-software，代码行数:14，代码来源:stm32f4xx_it.c

示例5: USART6_IRQHandler

/**
* @brief This function handles USART6 global interrupt.
*/
void USART6_IRQHandler(void)
{
  /* USER CODE BEGIN USART6_IRQn 0 */

  /* USER CODE END USART6_IRQn 0 */
  HAL_NVIC_ClearPendingIRQ(USART6_IRQn);
  HAL_UART_IRQHandler(&huart6);
  /* USER CODE BEGIN USART6_IRQn 1 */

  /* USER CODE END USART6_IRQn 1 */
}

开发者ID:RMRobotics，项目名称:navxmxp，代码行数:14，代码来源:stm32f4xx_it.c

示例6: USART1_IRQHandler

void USART1_IRQHandler(void)
{
	portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
	
  HAL_UART_IRQHandler(&huart1);
	
	/* If lHigherPriorityTaskWoken is now equal to pdTRUE, then a context
	switch should be performed before the interrupt exists.  That ensures the
	unblocked (higher priority) task is returned to immediately. */
	portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
	
}

开发者ID:OUWECAD，项目名称:MOWE，代码行数:12，代码来源:stm32f0xx_it.c

示例7: UART4_IRQHandler

void UART4_IRQHandler(void)
{
 HAL_UART_IRQHandler(&huart4);
 
     HAL_UART_Receive_IT( &huart4 , string , 154);  
   
     if( (string[0] == 'm') && (string[152] == 'n') ){
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_13 , GPIO_PIN_SET );
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_14 , GPIO_PIN_RESET );
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_12 , GPIO_PIN_RESET );
    }else if( (string[0] == 'M') && (string[152] == 'N') ){
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_14 , GPIO_PIN_SET );
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_13 , GPIO_PIN_RESET );
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_12 , GPIO_PIN_RESET );
    }else{
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_12 , GPIO_PIN_SET );
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_13 , GPIO_PIN_RESET );
      HAL_GPIO_WritePin( GPIOD , GPIO_PIN_14 , GPIO_PIN_RESET );
    }
 HAL_UART_IRQHandler(&huart4);
}

开发者ID:mostafayasin，项目名称:MOTSL，代码行数:21，代码来源:main-RX-int-hal.c

示例8: USART1_IRQHandler

/**
* @brief This function handles USART1 global interrupt.
*/
void USART1_IRQHandler(void)
{

  trace_puts("Run into USART1_IRQHandler!");
  /* USER CODE BEGIN USART1_IRQn 0 */

  /* USER CODE END USART1_IRQn 0 */
  HAL_UART_IRQHandler(&huart1);
  /* USER CODE BEGIN USART1_IRQn 1 */

  /* USER CODE END USART1_IRQn 1 */
}

开发者ID:atmanic，项目名称:chassis_universal_platform，代码行数:15，代码来源:stm32f4xx_it.c

示例9: USART3_8_IRQHandler

void USART3_8_IRQHandler(void)
{
  if (__HAL_GET_PENDING_IT(HAL_ITLINE_USART3)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART3_INDEX]);
  }
  if (__HAL_GET_PENDING_IT(HAL_ITLINE_USART4)!= RESET)
  {
     HAL_UART_IRQHandler(&UartHandle[USART4_INDEX]);
  }
  if (__HAL_GET_PENDING_IT(HAL_ITLINE_USART5)!= RESET)
  {
     HAL_UART_IRQHandler(&UartHandle[USART5_INDEX]);
  }
  if (__HAL_GET_PENDING_IT(HAL_ITLINE_USART6)!= RESET)
  {
     HAL_UART_IRQHandler(&UartHandle[USART6_INDEX]);
  }
  if (__HAL_GET_PENDING_IT(HAL_ITLINE_USART7)!= RESET)
  {
     HAL_UART_IRQHandler(&UartHandle[USART7_INDEX]);
  }
  if (__HAL_GET_PENDING_IT(HAL_ITLINE_USART8)!= RESET)
  {
     HAL_UART_IRQHandler(&UartHandle[USART8_INDEX]);
  }
}

开发者ID:jmoyerman，项目名称:stm32f0_cube，代码行数:27，代码来源:stm32f0xx_it.c

示例10: USART3_8_IRQHandler

/**
  * @brief  This function handles UART3_8 interrupt request.  
  * @param  None
  * @retval None
  * @Note   This function is redefined in "main.h" and related to DMA 
  *         used for USART data transmission     
  */  
void USART3_8_IRQHandler(void)
{
  uint32_t pendingIT = SYSCFG->IT_LINE_SR[USART3_8_IRQn];
  
  if((pendingIT & SYSCFG_ITLINE29_SR_USART3_GLB)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART3_INDEX]);
  }
  if((pendingIT & SYSCFG_ITLINE29_SR_USART4_GLB)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART4_INDEX]);
  }
  if((pendingIT & SYSCFG_ITLINE29_SR_USART5_GLB)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART5_INDEX]);
  }
  if((pendingIT & SYSCFG_ITLINE29_SR_USART6_GLB)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART6_INDEX]);
  }
  if((pendingIT & SYSCFG_ITLINE29_SR_USART7_GLB)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART7_INDEX]);
  }
  if((pendingIT & SYSCFG_ITLINE29_SR_USART8_GLB)!= RESET)
  {
    HAL_UART_IRQHandler(&UartHandle[USART8_INDEX]);
  }
}

开发者ID:GreyCardinalRus，项目名称:stm32-cube，代码行数:36，代码来源:stm32f0xx_it.c

示例11: USART3_8_IRQHandler

/**
* @brief This function handles USART3 to USART8 global interrupts / USART3 wake-up interrupt through EXTI line 28.
*/
void USART3_8_IRQHandler(void)
{
	portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
	
#if (HO01R1 || HO02R0 || HO01R2 || HO02R1 || PO01R0 || PO02R0 || HO01R3 || HO02R2)
	HAL_UART_IRQHandler(&huart3);
#endif
#if (HO01R1 || HO02R0 || HO01R2 || HO02R1 || PO01R0 || PO02R0 || HO01R3 || HO02R2)
	HAL_UART_IRQHandler(&huart4);
#endif
#if (HO01R1 || HO02R0 || HO01R2 || HO02R1 || PO01R0 || PO02R0)
	HAL_UART_IRQHandler(&huart5);
#endif
#if (HO01R2 || HO02R1)
	HAL_UART_IRQHandler(&huart6);
#endif
#if (HO01R1 || HO02R0 || HO01R3 || HO02R2)
	HAL_UART_IRQHandler(&huart7);
#endif
#if (HO01R1 || HO02R0 || PO01R0 || PO02R0 || HO01R3 || HO02R2)
	HAL_UART_IRQHandler(&huart8);
#endif
	
	/* If lHigherPriorityTaskWoken is now equal to pdTRUE, then a context
	switch should be performed before the interrupt exists.  That ensures the
	unblocked (higher priority) task is returned to immediately. */
	portEND_SWITCHING_ISR( xHigherPriorityTaskWoken );
	
}

开发者ID:OUWECAD，项目名称:MOWE，代码行数:32，代码来源:stm32f0xx_it.c

示例12: USART1_IRQHandler

/**
* @brief This function handles USART1 global interrupt.
*/
void USART1_IRQHandler(void)
{
  /* USER CODE BEGIN USART1_IRQn 0 */

  /* USER CODE END USART1_IRQn 0 */
  HAL_UART_IRQHandler(&huart1);
  /* USER CODE BEGIN USART1_IRQn 1 */
HAL_GPIO_WritePin( GPIOG, GPIO_PIN_13, GPIO_PIN_SET);
	for(uint32_t i=0;i<100000;i++){}
HAL_GPIO_WritePin( GPIOG, GPIO_PIN_13, GPIO_PIN_RESET);
//	 HAL_UART_Receive_IT(&huart1, receiveBuffer, 1);
  /* USER CODE END USART1_IRQn 1 */
}

开发者ID:ilyaseeyousoon，项目名称:stm32f429_spi_slave_hal，代码行数:16，代码来源:stm32f4xx_it.c

示例13: USART1_IRQHandler

/**
  * @brief  This function handles UART interrupt request.
  * @param  None
  * @retval None
  */
void USART1_IRQHandler(void)
{
  /* Check if it's a RX interrupt */
  uint32_t tmp_flag = 0, tmp_it_source = 0;
  tmp_flag = __HAL_UART_GET_FLAG(&UART_Handle, UART_FLAG_RXNE);
  tmp_it_source = __HAL_UART_GET_IT_SOURCE(&UART_Handle, UART_IT_RXNE);
  if ((tmp_flag != RESET) && (tmp_it_source != RESET))
  {
    UART1_DataReceivedHandler();
  }
  /* Otherwise call the HAL IRQ handler */
  else
    HAL_UART_IRQHandler(&UART_Handle);
}

开发者ID:hampussandberg，项目名称:HexConnect，代码行数:19，代码来源:stm32f1xx_it.c

示例14: USART2_IRQHandler

/**
* @brief This function handles USART2 global interrupt.
*/
void USART2_IRQHandler(void)
{
  /* USER CODE BEGIN USART2_IRQn 0 */
#if 1
    if(__HAL_UART_GET_FLAG(&huart2, UART_FLAG_IDLE) && __HAL_UART_GET_IT_SOURCE(&huart2, UART_IT_IDLE))
    {
        __HAL_UART_CLEAR_IDLEFLAG(&huart2);
        ESP8266_RecvCallback(RECV_IDLE);
    }
#else
  /* USER CODE END USART2_IRQn 0 */
  HAL_UART_IRQHandler(&huart2);
  /* USER CODE BEGIN USART2_IRQn 1 */
#endif
  /* USER CODE END USART2_IRQn 1 */
}

开发者ID:JalonWong，项目名称:Mini-IoT，代码行数:19，代码来源:stm32f1xx_it.c

示例15: USART1_IRQHandler

/**
* @brief This function handles USART1 global interrupt / USART1 wake-up interrupt through EXTI line 25.
*/
void USART1_IRQHandler(void)
{
  /* USER CODE BEGIN USART1_IRQn 0 */
  if(__HAL_UART_GET_IT_SOURCE(&huart1, UART_IT_RXNE)!= RESET) 
	{
		prvvUARTRxISR();
	}
	if(__HAL_UART_GET_IT_SOURCE(&huart1, UART_IT_TXE)!= RESET) 
	{
		prvvUARTTxReadyISR();
	}
  /* USER CODE END USART1_IRQn 0 */
  HAL_UART_IRQHandler(&huart1);
  /* USER CODE BEGIN USART1_IRQn 1 */

  /* USER CODE END USART1_IRQn 1 */
}

开发者ID:RunnerL，项目名称:Farsight_SXT，代码行数:20，代码来源:stm32f0xx_it.c

示例16: USART1_IRQHandler

//void TIM4_IRQHandler( void )
//void I2C1_EV_IRQHandler( void )
//void I2C1_ER_IRQHandler( void )
//void I2C2_EV_IRQHandler( void )
//void I2C2_ER_IRQHandler( void )
//void SPI1_IRQHandler( void )
//void SPI2_IRQHandler( void )
void USART1_IRQHandler( void )
{
#if defined(KS_HW_UART_HAL_LIBRARY)
  HAL_UART_IRQHandler(hSerial.handle);

#else
  if (__HAL_UART_GET_IT_SOURCE(hSerial.handle, UART_IT_TXE) != RESET) {
    __HAL_UART_GET_IT_SOURCE(hSerial.handle, UART_IT_TXE);
    HAL_UART_TxCpltCallback(hSerial.handle);
  }
  if (__HAL_UART_GET_IT_SOURCE(hSerial.handle, UART_IT_RXNE) != RESET) {
    __HAL_UART_GET_IT_SOURCE(hSerial.handle, UART_IT_RXNE);
    HAL_UART_RxCpltCallback(hSerial.handle);
  }

#endif
}

开发者ID:QCopter，项目名称:QCopterFlightControl，代码行数:24，代码来源:stm32f4xx_it.c

示例17: USART1_IRQHandler

/**
* @brief This function handles USART1 global interrupt.
*/
void USART1_IRQHandler(void)
{
  /* USER CODE BEGIN USART1_IRQn 0 */
	uint32_t tmp1, tmp2;
  tmp1 = __HAL_UART_GET_FLAG(&huart1, UART_FLAG_IDLE);
  tmp2 = __HAL_UART_GET_IT_SOURCE(&huart1, UART_IT_IDLE);

  if((tmp1 != RESET) && (tmp2 != RESET))
  {
		__HAL_UART_DISABLE_IT(&huart1, UART_IT_IDLE);
    __HAL_UART_CLEAR_IDLEFLAG(&huart1);
    My_HAL_UART_IdleCallback(&huart1);
  }

  /* USER CODE END USART1_IRQn 0 */
  HAL_UART_IRQHandler(&huart1);
  /* USER CODE BEGIN USART1_IRQn 1 */

  /* USER CODE END USART1_IRQn 1 */
}

开发者ID:35408EF66CCE4377B1E3C2495CA1C18A，项目名称:stm32f407_oled，代码行数:23，代码来源:stm32f4xx_it.c

示例18: USART2_IRQHandler

/**
* @brief This function handles USART2 global interrupt.
*/
void USART2_IRQHandler(void)
{
  /* USER CODE BEGIN USART2_IRQn 0 */
	uint32_t tmp_flag = 0;
	
	tmp_flag = __HAL_UART_GET_FLAG(&huart2,UART_FLAG_IDLE);
	if((tmp_flag != RESET))
  {
		__HAL_UART_CLEAR_IDLEFLAG(&huart2);
		huart2.Instance->ISR;           //读取寄存器，清理相应标志位
		huart2.Instance->TDR; 			     //读取寄存器，清理相应标志位
		HAL_UART_DMAStop(&huart2);
		dma_state = HAL_UART_Receive_DMA(&huart2,uart2_recv_buf,BUFFER_SIZE);
	}
  /* USER CODE END USART2_IRQn 0 */
  HAL_UART_IRQHandler(&huart2);
  /* USER CODE BEGIN USART2_IRQn 1 */

  /* USER CODE END USART2_IRQn 1 */
}

开发者ID:RunnerL，项目名称:Farsight_SXT，代码行数:23，代码来源:stm32f0xx_it.c

示例19: serial_irq_handler_asynch

/**
 * The asynchronous TX and RX handler.
 *
 * @param obj The serial object
 * @return Returns event flags if a TX/RX transfer termination condition was met or 0 otherwise
 */
int serial_irq_handler_asynch(serial_t *obj)
{
    struct serial_s *obj_s = SERIAL_S(obj);
    UART_HandleTypeDef *huart = &uart_handlers[obj_s->index];
    
    volatile int return_event = 0;
    uint8_t *buf = (uint8_t*)(obj->rx_buff.buffer);
    uint8_t i = 0;
    
    // TX PART:
    if (__HAL_UART_GET_FLAG(huart, UART_FLAG_TC) != RESET) {
        if (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET) {
            // Return event SERIAL_EVENT_TX_COMPLETE if requested
            if ((obj_s->events & SERIAL_EVENT_TX_COMPLETE ) != 0) {
                return_event |= (SERIAL_EVENT_TX_COMPLETE & obj_s->events);
            }
        }
    }
    
    // Handle error events
    if (__HAL_UART_GET_FLAG(huart, UART_FLAG_PE) != RESET) {
        if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
            return_event |= (SERIAL_EVENT_RX_PARITY_ERROR & obj_s->events);
        }
    }
    
    if (__HAL_UART_GET_FLAG(huart, UART_FLAG_FE) != RESET) {
        if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
            return_event |= (SERIAL_EVENT_RX_FRAMING_ERROR & obj_s->events);
        }
    }
    
    if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) != RESET) {
        if (__HAL_UART_GET_IT_SOURCE(huart, USART_IT_ERR) != RESET) {
            return_event |= (SERIAL_EVENT_RX_OVERRUN_ERROR & obj_s->events);
        }
    }
    
    HAL_UART_IRQHandler(huart);
    
    // Abort if an error occurs
    if (return_event & SERIAL_EVENT_RX_PARITY_ERROR ||
            return_event & SERIAL_EVENT_RX_FRAMING_ERROR ||
            return_event & SERIAL_EVENT_RX_OVERRUN_ERROR) {
        return return_event;
    }
    
    //RX PART
    if (huart->RxXferSize != 0) {
        obj->rx_buff.pos = huart->RxXferSize - huart->RxXferCount;
    }
    if ((huart->RxXferCount == 0) && (obj->rx_buff.pos >= (obj->rx_buff.length - 1))) {
        return_event |= (SERIAL_EVENT_RX_COMPLETE & obj_s->events);
    }
    
    // Check if char_match is present
    if (obj_s->events & SERIAL_EVENT_RX_CHARACTER_MATCH) {
        if (buf != NULL) {
            for (i = 0; i < obj->rx_buff.pos; i++) {
                if (buf[i] == obj->char_match) {
                    obj->rx_buff.pos = i;
                    return_event |= (SERIAL_EVENT_RX_CHARACTER_MATCH & obj_s->events);
                    serial_rx_abort_asynch(obj);
                    break;
                }
            }
        }
    }
    
    return return_event;  
}

开发者ID:AlessandroA，项目名称:mbed，代码行数:77，代码来源:serial_api.c

示例20: HAL_UART_IRQHandler

void Uart::IRQ()
{

	 HAL_UART_IRQHandler(& m_huart);
	//__HAL_UART_CLEAR_FLAG(& m_huart,UART_FLAG_RXNE);
}

开发者ID:ViaudJV，项目名称:stm32bot，代码行数:6，代码来源:Uart.cpp

注：本文中的HAL_UART_IRQHandler函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ HAL_UART_Init函数代码示例发布时间：2022-05-30

C++ HAL_UART_DeInit函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18269|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9677|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8457|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8428|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ HAL_UART_IRQHandler函数代码示例

示例1: UART4_IRQHandler

示例2: USART3_IRQHandler

示例3: UART4_IRQHandler

示例4: USART2_IRQHandler

示例5: USART6_IRQHandler

示例6: USART1_IRQHandler

示例7: UART4_IRQHandler

示例8: USART1_IRQHandler

示例9: USART3_8_IRQHandler

示例10: USART3_8_IRQHandler

示例11: USART3_8_IRQHandler

示例12: USART1_IRQHandler

示例13: USART1_IRQHandler

示例14: USART2_IRQHandler

示例15: USART1_IRQHandler

示例16: USART1_IRQHandler

示例17: USART1_IRQHandler

示例18: USART2_IRQHandler

示例19: serial_irq_handler_asynch

示例20: HAL_UART_IRQHandler

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

MATLAB数据类型 — 元胞（cell）

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053