本文整理汇总了C++中InvalidateRect函数的典型用法代码示例。如果您正苦于以下问题：C++ InvalidateRect函数的具体用法？C++ InvalidateRect怎么用？C++ InvalidateRect使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了InvalidateRect函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ConvertTexMatWithQTexture
//.........这里部分代码省略.........
char sz[128];
texdef_t *pt;
brushprimit_texdef_t *bpt;
// local copy if a width=2 height=2 qtetxture_t is needed
brushprimit_texdef_t local_bp;
int i;
if (!g_surfwin)
return;
m_bPatchMode = false;
if (OnlyPatchesSelected())
{
pt = &g_qeglobals.d_texturewin.texdef;
if (QE_SingleBrush())
{
//strcpy(g_patch_texdef.name, Patch_GetTextureName());
g_patch_texdef.SetName(Patch_GetTextureName());
}
else
{
//strcpy(g_patch_texdef.name, pt->name);
g_patch_texdef.SetName(pt->name);
}
g_patch_texdef.contents = pt->contents;
g_patch_texdef.flags = pt->flags;
g_patch_texdef.value = pt->value;
pt = &g_patch_texdef;
m_bPatchMode = true;
}
else
{
if (g_bNewFace && g_ptrSelectedFaces.GetSize() > 0)
{
face_t *selFace = reinterpret_cast<face_t*>(g_ptrSelectedFaces.GetAt(0));
pt = &selFace->texdef;
if (g_qeglobals.m_bBrushPrimitMode)
{
// compute a texture matrix related to the default matrix width=2 height=2
ConvertTexMatWithQTexture( &selFace->brushprimit_texdef, selFace->d_texture, &local_bp, NULL );
bpt = &local_bp;
}
}
else
{
pt = &g_qeglobals.d_texturewin.texdef;
if (g_qeglobals.m_bBrushPrimitMode)
{
bpt = &g_qeglobals.d_texturewin.brushprimit_texdef;
}
}
// brush primitive mode : compute fake shift scale rot representation
if (g_qeglobals.m_bBrushPrimitMode)
TexMatToFakeTexCoords( bpt->coords, m_shift, &m_rotate, m_scale );
}
SendMessage (WM_SETREDRAW, 0, 0);
::SetWindowText(GetDlgItem(IDC_TEXTURE)->GetSafeHwnd(), pt->name);
if (m_bPatchMode)
sprintf(sz, "%4.6f", pt->shift[0]);
else
if (g_qeglobals.m_bBrushPrimitMode)
sprintf(sz, "%d", (int)m_shift[0]);
else
sprintf(sz, "%d", (int)pt->shift[0]);
::SetWindowText(GetDlgItem(IDC_HSHIFT)->GetSafeHwnd(), sz);
if (m_bPatchMode)
sprintf(sz, "%4.6f", pt->shift[1]);
else
if (g_qeglobals.m_bBrushPrimitMode)
sprintf(sz, "%d", (int)m_shift[1]);
else
sprintf(sz, "%d", (int)pt->shift[1]);
::SetWindowText(GetDlgItem(IDC_VSHIFT)->GetSafeHwnd(), sz);
sprintf(sz, m_bPatchMode ? "%4.6f" : "%4.6f", g_qeglobals.m_bBrushPrimitMode ? m_scale[0] : pt->scale[0]);
::SetWindowText(GetDlgItem(IDC_HSCALE)->GetSafeHwnd(), sz);
sprintf(sz, m_bPatchMode ? "%4.6f" : "%4.6f", g_qeglobals.m_bBrushPrimitMode ? m_scale[1] : pt->scale[1]);
::SetWindowText(GetDlgItem(IDC_VSCALE)->GetSafeHwnd(), sz);
//++timo compute BProtate as int ..
sprintf(sz, "%d", g_qeglobals.m_bBrushPrimitMode ? (int)m_rotate : (int)pt->rotate);
::SetWindowText(GetDlgItem(IDC_ROTATE)->GetSafeHwnd(), sz);
sprintf(sz, "%d", (int)pt->value);
::SetWindowText(GetDlgItem(IDC_VALUE)->GetSafeHwnd(), sz);
for (i=0 ; i<32 ; i++)
::SendMessage(GetDlgItem(g_checkboxes[i])->GetSafeHwnd(), BM_SETCHECK, !!(pt->flags&(1<<i)), 0 );
for (i=0 ; i<32 ; i++)
::SendMessage(GetDlgItem(g_checkboxes[32+i])->GetSafeHwnd(), BM_SETCHECK, !!(pt->contents&(1<<i)), 0 );
SendMessage (WM_SETREDRAW, 1, 0);
InvalidateRect (NULL, true);
}
开发者ID:Izhido，项目名称:qrevpak，代码行数:101，代码来源:SurfaceDlg.cpp
示例2: WndProc
//.........这里部分代码省略.........
apt[2].x = cxClient / 2 ;
apt[2].y = 3 * cyClient / 4 ;
apt[3].x = 3 * cxClient / 4 ;
apt[3].y = cyClient / 2 ;
return 0 ;
case WM_LBUTTONDOWN:
case WM_RBUTTONDOWN:
case WM_MOUSEMOVE:
if (wParam & MK_LBUTTON || wParam & MK_RBUTTON)
{
hdc = GetDC (hwnd) ;
SelectObject (hdc, GetStockObject (WHITE_PEN)) ;
DrawBezier (hdc, apt) ;
if (wParam & MK_LBUTTON)
{
apt[1].x = LOWORD (lParam) ;
apt[1].y = HIWORD (lParam) ;
}
if (wParam & MK_RBUTTON)
{
apt[2].x = LOWORD (lParam) ;
apt[2].y = HIWORD (lParam) ;
}
SelectObject (hdc, GetStockObject (BLACK_PEN)) ;
DrawBezier (hdc, apt) ;
ReleaseDC (hwnd, hdc) ;
}
return 0 ;
case WM_PAINT:
InvalidateRect (hwnd, NULL, TRUE) ;
hdc = BeginPaint (hwnd, &ps) ;
DrawBezier (hdc, apt) ;
EndPaint (hwnd, &ps) ;
return 0 ;
case WM_DESTROY:
PostQuitMessage (0) ;
return 0 ;
}
return DefWindowProc (hwnd, message, wParam, lParam) ;
}
开发者ID:chenhz2284，项目名称:cpp_lib，代码行数:101，代码来源:main4.cpp
示例3: BrowseNamesDlgProc
/* Handles browse names dialog box */
LRESULT CALLBACK BrowseNamesDlgProc(HWND hDlg, UINT msg, WPARAM wParam, LPARAM lParam)
{
static List namesList = NIL;
List names=NIL;
struct strName nm;
Name n;
UINT theName;
WORD NotifyCode, wId;
RECT aRect, DlgRect;
HBITMAP hBitmap;
HBITMAP hBmp;
BITMAP bm;
static HBITMAP hPBm, hPSelBm, hDBm, hDSelBm, hMBm, hMSelBm, hNBm, hNSelBm,
hSBm, hSSelBm;
CHAR Buffer[300];
DRAWITEMSTRUCT FAR *lpdis;
LPMEASUREITEMSTRUCT lpmis;
BOOL Selected = FALSE;
NotifyCode = HIWORD (wParam);
wId = LOWORD (wParam);
switch (msg) {
case WM_INITDIALOG:
CenterDialogInParent(hDlg);
SetDialogFont (hDlg, hDialogFont);
namesList = addNamesMatching((String)0, NIL);
/* Clear the redraw flag */
SendDlgItemMessage(hDlg, LB_NAMES ,WM_SETREDRAW, FALSE, 0L);
for (names=namesList; nonNull(names); names=tl(names)) {
if (nonNull(names)) {
nm = name(hd(names));
fprintf(stdstr, "%s -- in %s\n",textToStr(nm.text),textToStr(module(nm.mod).text));
SendDlgItemMessage(hDlg, LB_NAMES ,LB_ADDSTRING, 0, (LONG)(LPSTR) stdstrbuff);
SendDlgItemMessage(hDlg, LB_NAMES, LB_SETCURSEL, 0, 0L);
}
}
/* Set the redraw flag and force repaint. */
SendDlgItemMessage(hDlg, LB_NAMES ,WM_SETREDRAW, TRUE, 0L);
InvalidateRect(GetDlgItem(hDlg, LB_NAMES), NULL, TRUE);
theName = 0;
SetName(hDlg, theName, namesList);
hPBm = LoadBitmap (hThisInstance, "PRIMBMP");
MapBitmap (hPBm, RGB(0,128,128), GetSysColor(COLOR_WINDOW));
hPSelBm = LoadBitmap (hThisInstance, "PRIMBMP");
MapBitmap (hPSelBm, RGB(0,128,128), GetSysColor(COLOR_HIGHLIGHT));
hDBm = LoadBitmap (hThisInstance, "DATACONSBMP");
MapBitmap (hDBm, RGB(0,128,128), GetSysColor(COLOR_WINDOW));
hDSelBm = LoadBitmap (hThisInstance, "DATACONSBMP");
MapBitmap (hDSelBm, RGB(0,128,128), GetSysColor(COLOR_HIGHLIGHT));
hMBm = LoadBitmap (hThisInstance, "MEMBERBMP");
MapBitmap (hMBm, RGB(0,128,128), GetSysColor(COLOR_WINDOW));
hMSelBm = LoadBitmap (hThisInstance, "MEMBERBMP");
MapBitmap (hMSelBm, RGB(0,128,128), GetSysColor(COLOR_HIGHLIGHT));
hNBm = LoadBitmap (hThisInstance, "NAMEBMP");
MapBitmap (hNBm, RGB(0,128,128), GetSysColor(COLOR_WINDOW));
hNSelBm = LoadBitmap (hThisInstance, "NAMEBMP");
MapBitmap (hNSelBm, RGB(0,128,128), GetSysColor(COLOR_HIGHLIGHT));
hSBm = LoadBitmap (hThisInstance, "SELECTORBMP");
MapBitmap (hSBm, RGB(0,128,128), GetSysColor(COLOR_WINDOW));
hSSelBm = LoadBitmap (hThisInstance, "SELECTORBMP");
MapBitmap (hSSelBm, RGB(0,128,128), GetSysColor(COLOR_HIGHLIGHT));
/* set focus to search box (must return FALSE) */
SetFocus (GetDlgItem(hDlg, IDC_SEARCHNAME));
return FALSE;
case WM_DESTROY:
DeleteObject(hPBm);
DeleteObject(hPSelBm);
DeleteObject(hDBm);
DeleteObject(hDSelBm);
DeleteObject(hMBm);
DeleteObject(hMSelBm);
DeleteObject(hNBm);
DeleteObject(hNSelBm);
DeleteObject(hSBm);
DeleteObject(hSSelBm);
break;
case WM_CTLCOLORBTN:
case WM_CTLCOLORDLG:
case WM_CTLCOLOREDIT:
case WM_CTLCOLORLISTBOX:
case WM_CTLCOLORMSGBOX:
case WM_CTLCOLORSCROLLBAR:
case WM_CTLCOLORSTATIC:
break;
case WM_MEASUREITEM:
lpdis = (DRAWITEMSTRUCT FAR *) lParam;
//.........这里部分代码省略.........
开发者ID:OS2World，项目名称:DEV-UTIL-HUGS，代码行数:101，代码来源:Winbrows.c
示例4: MainWinProc
//.........这里部分代码省略.........
}
}
v = v0;
x = x0;
SelectObject(hDC, Pen5);
for(t = -6.0; t <= 11; t = t + 0.1 ){
k1=-(g*v +w1*w1*x)+a*cos(w2*t);
k2=-(g*(v+k1/2)+w1*w1*x) + a*cos(w2*(t+0.05));
k3=-(g*(v+k2/2)+w1*w1*x) + a*cos(w2*(t+0.05));
k4=-(g*(v+k3)+w1*w1*x) + a*cos(w2*(t+0.1));
v=v+(k1+2*k2+2*k3+k4)/60;
x=x+0.1*v;
k1n=-(g*v +w1*w1*x)+a*cos(w2*t);
k2n=-(g*(v+k1/2)+w1*w1*x) + a*cos(w2*(t+0.05));
k3n=-(g*(v+k2/2)+w1*w1*x) + a*cos(w2*(t+0.05));
k4n=-(g*(v+k3)+w1*w1*x) + a*cos(w2*(t+0.1));
vn=v+(k1n+2*k2n+2*k3n+k4n)/60;
xn=x+0.1*v;
if(((20*t+150)<370) && ((-20*x+360)>240) && ((20*(t+0.1)+150)<370) && ((-20*xn+360)>240)){
MoveToEx( hDC, 20*t+150, -20*x+360, NULL );
LineTo( hDC, 20*(t+0.1)+150, -20*xn+360 );
}
if(((20*t+150)<370) && ((-20*v+120)<240) && ((20*(t+0.1)+150)<370) && ((-20*vn+120)<240)){
MoveToEx( hDC, 20*t+150, -20*v+120, NULL );
LineTo( hDC, 20*(t+0.1)+150, -20*vn+120);
}
if(((20*x+555)>370) && ((-20*v+120)<240) && ((20*xn+555)>370) && ((-20*vn+120)<240)){
MoveToEx( hDC, 20*x+555, -20*v+120, NULL );
LineTo( hDC, 20*xn+555, -20*vn+120);
}
}
}
EndPaint(hw, &ps);
return 0;
break;
case WM_COMMAND:
/* нажата наша кнопочка? */
if ((HIWORD(wp)==0) && (LOWORD(wp)==ID_MYBUTTON)){
// MessageBox(hw,"You pressed my button","MessageBox",MB_OK|MB_ICONWARNING);
GetDlgItemText(hw, ID_STARTSPD, LPSTR(V0), 80 );
GetDlgItemText(hw, ID_STARTPOS, LPSTR(X0), 80 );
GetDlgItemText(hw, ID_MAINFREQ, LPSTR(W1), 80 );
GetDlgItemText(hw, ID_ATTCONST, LPSTR(G), 80 );
GetDlgItemText(hw, ID_PWFREQUE, LPSTR(W2), 80 );
GetDlgItemText(hw, ID_PWAMPLIT, LPSTR(A), 80 );
if(V0[0] == 0){
MessageBox(hw,"Input start speed","ERROR",MB_OK|MB_ICONERROR);
}
if(X0[0] == 0){
MessageBox(hw,"Input start position","ERROR",MB_OK|MB_ICONERROR);
}
if(W1[0] == 0){
MessageBox(hw,"Input main frequency","ERROR",MB_OK|MB_ICONERROR);
}
if(G[0] == 0){
MessageBox(hw,"Input attenuation constant","ERROR",MB_OK|MB_ICONERROR);
}
if(W2[0] == 0){
MessageBox(hw,"Input driving force's frequency","ERROR",MB_OK|MB_ICONERROR);
}
if(A[0] == 0){
MessageBox(hw,"Input driving force's amplitude","ERROR",MB_OK|MB_ICONERROR);
}
v0 = atof(V0);
x0 = atof(X0);
w1 = atof(W1);
g = atof(G);
w2 = atof(W2);
a = atof(A);
v = v0;
x = x0;
InvalidateRect(hw, NULL, FALSE);
// UpdateWindow(hw);
//MoveWindow(hw, 0, 0, 740, 480, true);
}
return 0;
case WM_DESTROY:
/* пользователь закрыл окно, программа может завершаться */
PostQuitMessage(0);
return 0;
}
return DefWindowProc(hw,msg,wp,lp);
}
开发者ID:VulpesCorsac，项目名称:Mathematical-Modelling-DPQE-MIPT，代码行数:101，代码来源:Колебания.cpp
示例5: GetClientRect
void debugview_info::update()
{
RECT bounds, vscroll_bounds, hscroll_bounds;
debug_view_xy totalsize, visiblesize, topleft;
bool show_vscroll, show_hscroll;
SCROLLINFO scrollinfo;
// get the view window bounds
GetClientRect(m_wnd, &bounds);
visiblesize.x = (bounds.right - bounds.left) / metrics().debug_font_width();
visiblesize.y = (bounds.bottom - bounds.top) / metrics().debug_font_height();
// get the updated total rows/cols and left row/col
totalsize = m_view->total_size();
topleft = m_view->visible_position();
// determine if we need to show the scrollbars
show_vscroll = show_hscroll = false;
if (totalsize.x > visiblesize.x && bounds.bottom >= metrics().hscroll_height())
{
bounds.bottom -= metrics().hscroll_height();
visiblesize.y = (bounds.bottom - bounds.top) / metrics().debug_font_height();
show_hscroll = true;
}
if (totalsize.y > visiblesize.y && bounds.right >= metrics().vscroll_width())
{
bounds.right -= metrics().vscroll_width();
visiblesize.x = (bounds.right - bounds.left) / metrics().debug_font_width();
show_vscroll = true;
}
if (!show_vscroll && totalsize.y > visiblesize.y && bounds.right >= metrics().vscroll_width())
{
bounds.right -= metrics().vscroll_width();
visiblesize.x = (bounds.right - bounds.left) / metrics().debug_font_width();
show_vscroll = true;
}
// compute the bounds of the scrollbars
GetClientRect(m_wnd, &vscroll_bounds);
vscroll_bounds.left = vscroll_bounds.right - metrics().vscroll_width();
if (show_hscroll)
vscroll_bounds.bottom -= metrics().hscroll_height();
GetClientRect(m_wnd, &hscroll_bounds);
hscroll_bounds.top = hscroll_bounds.bottom - metrics().hscroll_height();
if (show_vscroll)
hscroll_bounds.right -= metrics().vscroll_width();
// if we hid the scrollbars, make sure we reset the top/left corners
if (topleft.y + visiblesize.y > totalsize.y)
topleft.y = std::max(totalsize.y - visiblesize.y, 0);
if (topleft.x + visiblesize.x > totalsize.x)
topleft.x = std::max(totalsize.x - visiblesize.x, 0);
// fill out the scroll info struct for the vertical scrollbar
scrollinfo.cbSize = sizeof(scrollinfo);
scrollinfo.fMask = SIF_PAGE | SIF_POS | SIF_RANGE;
scrollinfo.nMin = 0;
scrollinfo.nMax = totalsize.y - 1;
scrollinfo.nPage = visiblesize.y;
scrollinfo.nPos = topleft.y;
SetScrollInfo(m_vscroll, SB_CTL, &scrollinfo, TRUE);
// fill out the scroll info struct for the horizontal scrollbar
scrollinfo.cbSize = sizeof(scrollinfo);
scrollinfo.fMask = SIF_PAGE | SIF_POS | SIF_RANGE;
scrollinfo.nMin = 0;
scrollinfo.nMax = totalsize.x - 1;
scrollinfo.nPage = visiblesize.x;
scrollinfo.nPos = topleft.x;
SetScrollInfo(m_hscroll, SB_CTL, &scrollinfo, TRUE);
// update window info
visiblesize.y++;
visiblesize.x++;
m_view->set_visible_size(visiblesize);
m_view->set_visible_position(topleft);
// invalidate the bounds
InvalidateRect(m_wnd, nullptr, FALSE);
// adjust the bounds of the scrollbars and show/hide them
if (m_vscroll)
{
if (show_vscroll)
smart_set_window_bounds(m_vscroll, m_wnd, vscroll_bounds);
smart_show_window(m_vscroll, show_vscroll);
}
if (m_hscroll)
{
if (show_hscroll)
smart_set_window_bounds(m_hscroll, m_wnd, hscroll_bounds);
smart_show_window(m_hscroll, show_hscroll);
}
}
开发者ID:RalfVB，项目名称:mame，代码行数:95，代码来源:debugviewinfo.cpp
示例6: WindowProcedure
LRESULT CALLBACK WindowProcedure(HWND hwnd, UINT message, WPARAM wParam, LPARAM lParam)
{
osdmsg *ms;
switch (message) {
case WM_CREATE:
logmsg("WindowProcedure::CREATE");
SetWindowLongPtr(hwnd, GWLP_USERDATA, (LONG_PTR)&defstr);
return 0;
case WM_DESTROY:
logmsg("WindowProcedure::DESTROY");
return 0;
case WM_PAINT:
logmsg("WindowProcedure::PAINT");
ms = (osdmsg*)GetWindowLongPtr(hwnd, GWLP_USERDATA);
if (ms)
return DrawMe(hwnd, ms->text, ms->color);
PAINTSTRUCT ps;
BeginPaint(hwnd, &ps);
EndPaint(hwnd, &ps);
return 0;
case WM_NCRBUTTONDOWN:
logmsg("WindowProcedure::NCRBUTTONDOWN");
ms = (osdmsg*)GetWindowLongPtr(hwnd, GWLP_USERDATA);
if (ms) {
if (ms->callback) ms->callback(ms->param);
SendMessage(hwnd, WM_USER + 3, 0, 0);
}
return 0;
case WM_TIMER:
logmsg("WindowProcedure::TIMER");
SendMessage(hwnd, WM_USER + 3, wParam, 0);
return 0;
case WM_USER + 1: //draw text ((char *)string, (int) timeout
logmsg("WindowProcedure::USER+1");
ms = (osdmsg*)mir_alloc(sizeof(osdmsg));
ms->text = mir_tstrdup((TCHAR *)wParam);
if (lParam == 0)
lParam = db_get_dw(NULL, THIS_MODULE, "timeout", DEFAULT_TIMEOUT);
ms->timeout = lParam;
ms->callback = 0;
ms->color = db_get_dw(NULL, THIS_MODULE, "clr_msg", DEFAULT_CLRMSG);
ms->param = 0;
SendMessage(hwnd, WM_USER + 4, (WPARAM)ms, 0);
mir_free(ms->text);
mir_free(ms);
return 0;
case WM_USER + 2: //show
logmsg("WindowProcedure::USER+2");
SetWindowPos(hwnd, HWND_TOPMOST, 0, 0, 0, 0, SWP_NOMOVE | SWP_NOSIZE | SWP_SHOWWINDOW | SWP_NOACTIVATE);
return 0;
case WM_USER + 3: //hide
ms = (osdmsg*)GetWindowLongPtr(hwnd, GWLP_USERDATA);
logmsg("WindowProcedure::USER+3");
if (!ms)
return 0;
logmsg("WindowProcedure::USER+3/om");
KillTimer(hwnd, (UINT_PTR)ms);
mir_free(ms->text);
mir_free(ms);
SetWindowLongPtr(hwnd, GWLP_USERDATA, 0);
ShowWindow(hwnd, SW_HIDE);
return 0;
case WM_USER + 4:
logmsg("WindowProcedure::USER+4");
ms = (osdmsg*)GetWindowLongPtr(hwnd, GWLP_USERDATA);
if (ms != 0) {
logmsg("WindowProcedure::USER+4/old");
KillTimer(hwnd, (UINT_PTR)ms);
mir_free(ms->text);
mir_free(ms);
SetWindowLongPtr(hwnd, GWLP_USERDATA, 0);
}
ms = (osdmsg*)mir_alloc(sizeof(osdmsg));
memcpy(ms, (osdmsg*)wParam, sizeof(osdmsg));
ms->text = mir_tstrdup(ms->text);
SetWindowLongPtr(hwnd, GWLP_USERDATA, (LONG_PTR)ms);
SetTimer(hwnd, (UINT_PTR)ms, (UINT)ms->timeout, 0);
InvalidateRect(hwnd, 0, TRUE);
SendMessage(hwnd, WM_USER + 2, 0, 0);
return 0;
case WM_NCHITTEST:
{
//.........这里部分代码省略.........
开发者ID:Seldom，项目名称:miranda-ng，代码行数:101，代码来源:wbOSD.cpp
示例7: ProcessPageWndProc
INT_PTR CALLBACK
ProcessPageWndProc(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
RECT rc;
int nXDifference;
int nYDifference;
int cx, cy;
switch (message) {
case WM_INITDIALOG:
/*
* Save the width and height
*/
GetClientRect(hDlg, &rc);
nProcessPageWidth = rc.right;
nProcessPageHeight = rc.bottom;
/* Update window position */
SetWindowPos(hDlg, NULL, 15, 30, 0, 0, SWP_NOACTIVATE|SWP_NOOWNERZORDER|SWP_NOSIZE|SWP_NOZORDER);
/*
* Get handles to the controls
*/
hProcessPageListCtrl = GetDlgItem(hDlg, IDC_PROCESSLIST);
hProcessPageHeaderCtrl = (HWND)SendMessageW(hProcessPageListCtrl, LVM_GETHEADER, 0, 0);
hProcessPageEndProcessButton = GetDlgItem(hDlg, IDC_ENDPROCESS);
hProcessPageShowAllProcessesButton = GetDlgItem(hDlg, IDC_SHOWALLPROCESSES);
/* Enable manual column reordering, set full select */
SendMessageW(hProcessPageListCtrl, LVM_SETEXTENDEDLISTVIEWSTYLE, LVS_EX_FULLROWSELECT|LVS_EX_HEADERDRAGDROP,
LVS_EX_FULLROWSELECT|LVS_EX_HEADERDRAGDROP);
AddColumns();
/*
* Subclass the process list control so we can intercept WM_ERASEBKGND
*/
OldProcessListWndProc = (WNDPROC)SetWindowLongPtrW(hProcessPageListCtrl, GWLP_WNDPROC, (LONG_PTR)ProcessListWndProc);
/* Start our refresh thread */
CloseHandle( CreateThread(NULL, 0, ProcessPageRefreshThread, NULL, 0, NULL));
return TRUE;
case WM_DESTROY:
/* Close the event handle, this will make the */
/* refresh thread exit when the wait fails */
CloseHandle(hProcessPageEvent);
SaveColumnSettings();
break;
case WM_COMMAND:
/* Handle the button clicks */
switch (LOWORD(wParam))
{
case IDC_ENDPROCESS:
ProcessPage_OnEndProcess();
}
break;
case WM_SIZE:
if (wParam == SIZE_MINIMIZED)
return 0;
cx = LOWORD(lParam);
cy = HIWORD(lParam);
nXDifference = cx - nProcessPageWidth;
nYDifference = cy - nProcessPageHeight;
nProcessPageWidth = cx;
nProcessPageHeight = cy;
/* Reposition the application page's controls */
GetWindowRect(hProcessPageListCtrl, &rc);
cx = (rc.right - rc.left) + nXDifference;
cy = (rc.bottom - rc.top) + nYDifference;
SetWindowPos(hProcessPageListCtrl, NULL, 0, 0, cx, cy, SWP_NOACTIVATE|SWP_NOOWNERZORDER|SWP_NOMOVE|SWP_NOZORDER);
InvalidateRect(hProcessPageListCtrl, NULL, TRUE);
GetClientRect(hProcessPageEndProcessButton, &rc);
MapWindowPoints(hProcessPageEndProcessButton, hDlg, (LPPOINT)(&rc), (sizeof(RECT)/sizeof(POINT)) );
cx = rc.left + nXDifference;
cy = rc.top + nYDifference;
SetWindowPos(hProcessPageEndProcessButton, NULL, cx, cy, 0, 0, SWP_NOACTIVATE|SWP_NOOWNERZORDER|SWP_NOSIZE|SWP_NOZORDER);
InvalidateRect(hProcessPageEndProcessButton, NULL, TRUE);
GetClientRect(hProcessPageShowAllProcessesButton, &rc);
MapWindowPoints(hProcessPageShowAllProcessesButton, hDlg, (LPPOINT)(&rc), (sizeof(RECT)/sizeof(POINT)) );
cx = rc.left;
cy = rc.top + nYDifference;
SetWindowPos(hProcessPageShowAllProcessesButton, NULL, cx, cy, 0, 0, SWP_NOACTIVATE|SWP_NOOWNERZORDER|SWP_NOSIZE|SWP_NOZORDER);
InvalidateRect(hProcessPageShowAllProcessesButton, NULL, TRUE);
break;
case WM_NOTIFY:
ProcessPageOnNotify(lParam);
break;
}
//.........这里部分代码省略.........
开发者ID:AlexSteel，项目名称:wine，代码行数:101，代码来源:procpage.c
示例8: WndProc
//
// 函数: WndProc(HWND, UINT, WPARAM, LPARAM)
//
// 目的: 处理主窗口的消息。
//
// WM_COMMAND - 处理应用程序菜单
// WM_PAINT - 绘制主窗口
// WM_DESTROY - 发送退出消息并返回
//
//
LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
int wmId, wmEvent;
PAINTSTRUCT ps;
HDC hdc;
RECT rect;
switch (message)
{
case WM_COMMAND:
wmId = LOWORD(wParam);
wmEvent = HIWORD(wParam);
// 分析菜单选择:
switch (wmId)
{
case IDM_ABOUT:
DialogBox(hInst, MAKEINTRESOURCE(IDD_ABOUTBOX), hWnd, About);
break;
case IDM_EXIT:
DestroyWindow(hWnd);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
break;
//画图
case WM_PAINT:
hdc = BeginPaint(hWnd, &ps);
// TODO: 在此添加任意绘图代码...
//MoveToEx(hdc,50,50,0);
//LineTo(hdc,100,100);
for (int i=1;i<nCount;i++)
{
MoveToEx(hdc,xPosition[i-1],yPosition[i-1],0);
LineTo(hdc,xPosition[i],yPosition[i]);
}
//MoveToEx(hdc,xPosition[nCount-1],yPosition[nCount-1],0);
//LineTo(hdc,xPosition[0],yPosition[0]);
EndPaint(hWnd, &ps);
break;
case WM_DESTROY:
PostQuitMessage(0);
break;
case WM_MOUSEMOVE:
xPosition[nCount] = GET_X_LPARAM(lParam);
yPosition[nCount] = GET_Y_LPARAM(lParam);
nCount++;
GetClientRect(hWnd,&rect);
InvalidateRect(hWnd,&rect,TRUE);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
return 0;
}
开发者ID:soulsheng，项目名称:soulsheng-windows，代码行数:71，代码来源:WinPaint.cpp
示例9: LOWORD
/// <summary>
/// Handle windows messages for the class instance
/// </summary>
/// <param name="hWnd">window message is for</param>
/// <param name="uMsg">message</param>
/// <param name="wParam">message data</param>
/// <param name="lParam">additional message data</param>
/// <returns>result of message processing</returns>
LRESULT CALLBACK CFaceBasics::DlgProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
//UNREFERENCED_PARAMETER(wParam);
//UNREFERENCED_PARAMETER(lParam);
UINT wmId = LOWORD(wParam);
UINT wmEvent = HIWORD(wParam);
UINT lwmId = LOWORD(lParam);
UINT lwmEvent = HIWORD(lParam);
bool result = false;
hMenu = GetMenu(hWnd);
DWORD errResult;
switch (message)
{
case WM_INITDIALOG:
{
// Bind application window handle
m_hWnd = hWnd;
// Init Direct2D
D2D1CreateFactory(D2D1_FACTORY_TYPE_SINGLE_THREADED, &m_pD2DFactory);
// Create and initialize a new Direct2D image renderer (take a look at ImageRenderer.h)
// We'll use this to draw the data we receive from the Kinect to the screen
m_pDrawDataStreams = new ImageRenderer();
HRESULT hr = m_pDrawDataStreams->Initialize(GetDlgItem(m_hWnd, IDC_VIDEOVIEW), m_pD2DFactory, cColorWidth, cColorHeight, cColorWidth * sizeof(RGBQUAD));
if (FAILED(hr))
{
SetStatusMessage(L"Failed to initialize the Direct2D draw device.", 10000, true);
}
// Get and initialize the default Kinect sensor
InitializeDefaultSensor();
}
break;
case WM_COMMAND:
switch (wmId)
{
case ID_OPTIONS_SHOWFACEBOX:
errResult = GetMenuState(hMenu, ID_OPTIONS_SHOWFACEBOX,
MF_BYCOMMAND);
if (!(errResult & MF_CHECKED))
{
CheckMenuItem(hMenu, ID_OPTIONS_SHOWFACEBOX,
MF_BYCOMMAND | MF_CHECKED);
m_pDrawDataStreams->m_drawFaceBox = true;
}
else
{
CheckMenuItem(hMenu, ID_OPTIONS_SHOWFACEBOX,
MF_BYCOMMAND | MF_UNCHECKED);
m_pDrawDataStreams->m_drawFaceBox = false;
}
InvalidateRect(hWnd, 0, TRUE);
break;
case ID_OPTIONS_SHOWFACEPOINTS:
errResult = GetMenuState(hMenu, ID_OPTIONS_SHOWFACEPOINTS,
MF_BYCOMMAND);
if (!(errResult & MF_CHECKED))
{
CheckMenuItem(hMenu, ID_OPTIONS_SHOWFACEPOINTS,
MF_BYCOMMAND | MF_CHECKED);
m_pDrawDataStreams->m_drawFacePoints = true;
}
else
{
CheckMenuItem(hMenu, ID_OPTIONS_SHOWFACEPOINTS,
MF_BYCOMMAND | MF_UNCHECKED);
m_pDrawDataStreams->m_drawFacePoints = false;
}
InvalidateRect(hWnd, 0, TRUE);
break;
case ID_OPTIONS_SHOWHDFACEPOINTS:
errResult = GetMenuState(hMenu, ID_OPTIONS_SHOWHDFACEPOINTS,
MF_BYCOMMAND);
if (!(errResult & MF_CHECKED))
{
//.........这里部分代码省略.........
开发者ID:dngoins，项目名称:KinectFaceStudio，代码行数:101，代码来源:FaceBasics.cpp
示例10: AnimationCtrlProc
//.........这里部分代码省略.........
if (!anim_info->mem_dc)
break;
hdc = BeginPaint (hwnd);
src_dc = anim_info->mem_dc;
if (GetWindowStyle (hwnd) & ANS_SCALED) {
GetClientRect (hwnd, &rc_anim);
} else {
SetRect (&rc_anim, 0, 0, anim_info->anim->width,
anim_info->anim->height);
}
if (RECTW (rc_anim) == anim_info->anim->width
&& RECTH (rc_anim) == anim_info->anim->height) {
BitBlt (anim_info->mem_dc, 0, 0, 0, 0, hdc, 0, 0, 0);
} else {
StretchBlt (anim_info->mem_dc, 0, 0,
anim_info->anim->width, anim_info->anim->height,
hdc,
0, 0,
RECTW (rc_anim), RECTH (rc_anim), 0);
}
EndPaint (hwnd, hdc);
return 0;
}
case ANM_SETANIMATION: {
ANIMATION* old = anim_info->anim;
anim_info->anim = (ANIMATION*)lParam;
anim_info->current = NULL;
if (anim_info->anim) {
KillTimer (hwnd, ID_TIMER);
if (GetWindowStyle (hwnd) & ANS_FITTOANI) {
RECT rc;
GetWindowRect(hwnd, &rc);
MoveWindow(hwnd, rc.left, rc.top,
anim_info->anim->width,
anim_info->anim->height, FALSE);
}
anim_info->current = NULL;
setup_anim_mem_dc(hwnd, anim_info);
next_frame(hwnd, anim_info);
anim_info->elapsed_10ms = 0;
//SetTimer (hwnd, ID_TIMER, anim_info->anim->time_unit);
SetTimer (hwnd, ID_TIMER, 10);
}
return (int)old;
}
case ANM_GETANIMATION:
return (int)anim_info->anim;
case ANM_STARTPLAY: {
if (anim_info->anim) {
anim_info->current = NULL;
anim_info->status = ANIM_STATUS_PLAY;
next_frame(hwnd, anim_info);
anim_info->elapsed_10ms = 0;
}
return 0;
}
case ANM_PAUSE_RESUME:
if(anim_info->anim)
{
if (anim_info->status == ANIM_STATUS_PLAY)
anim_info->status = ANIM_STATUS_STOP;
else
anim_info->status = ANIM_STATUS_PLAY;
}
return 0;
case ANM_STOPPLAY:
if(anim_info->anim)
{
anim_info->current = NULL;
anim_info->status = ANIM_STATUS_STOP;
next_frame (hwnd, anim_info); //back to the first frame
anim_info->elapsed_10ms = 0;
InvalidateRect (hwnd, NULL, FALSE);
}
return 0;
case MSG_LBUTTONDBLCLK:
NotifyParent (hwnd, GetDlgCtrlID (hwnd), ANNC_DBLCLK);
break;
case MSG_LBUTTONDOWN:
NotifyParent (hwnd, GetDlgCtrlID (hwnd), ANNC_CLICKED);
break;
default:
break;
}
return DefaultControlProc (hwnd, message, wParam, lParam);
}
开发者ID:VVillwin，项目名称:minigui，代码行数:101，代码来源:animation.c
示例11: WndProc
//
// FUNCTION: WndProc(HWND, UINT, WPARAM, LPARAM)
//
// PURPOSE: Processes messages for the main window.
//
// WM_COMMAND - process the application menu
// WM_PAINT - Paint the main window
// WM_DESTROY - post a quit message and return
//
//
LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
int wmId, wmEvent;
PAINTSTRUCT ps;
HDC hdc;
RECT rect,rectDIY;
switch (message)
{
case WM_COMMAND:
wmId = LOWORD(wParam);
wmEvent = HIWORD(wParam);
// Parse the menu selections:
switch (wmId)
{
case IDM_ABOUT:
DialogBox(hInst, MAKEINTRESOURCE(IDD_ABOUTBOX), hWnd, About);
break;
case IDM_EXIT:
DestroyWindow(hWnd);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
break;
case WM_PAINT:
hdc = BeginPaint(hWnd, &ps);
rectDIY.left=0;
rectDIY.right=500;
rectDIY.top=0;
rectDIY.bottom=400;
DrawText(hdc,text,ncount,&rectDIY,0);
// TODO: Add any drawing code here...
EndPaint(hWnd, &ps);
break;
case WM_DESTROY:
//MessageBox(0,"SAVE?","�ב�¾",0);
PostQuitMessage(0);
break;
case WM_CHAR:
text[ncount]=wParam;
ncount++;
GetClientRect(hWnd,&rect);
InvalidateRect(hWnd,&rect,TRUE);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
return 0;
}
开发者ID:soulsheng，项目名称:soulsheng-windows，代码行数:71，代码来源:WinHello.cpp
示例12: OutputDebugString
int MHookHandler1::OnMouseMove(LONG _x, LONG _y)
{
int position;
bool goup=false; // Сразу отпусти клавишу
// При нажатой правой кнопке мыши не передаём её движения в MHVector,
// НО! продолжаем отслеживать last_x и last_y, не сбрасывая initialized!
// теперь по-новому: если есть прилипание к оси, то можно только противоположное
// или то же. Поворачивать нельзя.
if(initialized)
{
dx=(_x-last_x);
dy=(_y-last_y);
// Может, пятую кнопку можно нажать?
if(MHSettings::flag_enable_speed_button) OnFastMove(dx,dy);
position=MHVector::NewValues(dx,dy);
// Если вбок и вниз = просто вбок, меняем позиции 3 и 5 на 4
if((true==MHSettings::flag_downall)&&(8==MHSettings::GetNumPositions())&&((3==position)||(5==position)))
{
if(MHSettings::flag_up_immediately) goup=true;
position=4;
}
if(!rbutton_pressed) // известно последнее положение мыши, правая кнопка не нажата
{
// Новая опция - из конца в конец в два движения (только при 0==alt_offset)
if((MHSettings::flag_2moves_mode1)&&(0==alt2_offset))
{
if(0<=position) // новое направление
{
// Это противоположное направление?
if(IsOpposite(position_mem_opposite,position))
{
// 1. (при невыставленном флаге противоположного направления)
// сбросим нажатую клавишу. Нажать противоположную сможем только после таймаута
if(false==flag_opposite_direction)
{
// запомним время, отпустим кнопки, запомним направление (ниже)
opposite_time=timeGetTime();
MHKeypad::Reset(alt2_offset);
#ifdef _DEBUG
OutputDebugString(L"OppDir keyup");
#endif
flag_opposite_direction=true;
position_mem_opposite=position;
// Почему-то Reset не включает перерисовку
InvalidateRect(MHhwnd,NULL,TRUE);
}
else // при выставленном флаге противоположного направления
{
// 2. Как такое случилось?
// Не дожидаясь времени, когда можно идти назад, снова пошли вперёд
MHKeypad::Press(position,true,alt2_offset);
flag_opposite_direction=false;
position_mem_opposite=position;
if(goup) MHKeypad::Press(position,false, alt2_offset); // Флаг сказал, что нужно тут же отжать
}
}
else // не противоположное (position_mem содержит всё что угодно),
{
if(true==flag_opposite_direction)
{
// 3.
// ждём выхода в сторону position_mem, а по дороге завернули в сторону
// только здесь возможен поворот в сторону !!!
// Но только если прошло время обездвиженности!!!
if(timeGetTime()-opposite_time>100) // была пауза, можно идти в противоположном направлении
{
MHKeypad::Press(position,true, alt2_offset);
flag_opposite_direction=false;
position_mem_opposite=position;
if(goup) MHKeypad::Press(position,false, alt2_offset); // Флаг сказал, что нужно тут же отжать
}
else
{
MHVector::Reset(); // Не надо больше слать -1
opposite_time=timeGetTime(); // паузы в 50 мс неподвижности не было, перевзводим
}
//MHKeypad::Press(position,true);
//flag_opposite_direction=false; // уход в сторону - сброс ожиданий
}
else // flag_opposite_direction=false
{
// не ждём выхода в сторону position_mem.
// Нажимаем, только если -1==position_mem (при прилипании)
if((-1==position_mem)||(MHSettings::flag_change_direction_ontheway))
{
MHKeypad::Press(position,true, alt2_offset);
position_mem_opposite=position;
if(goup) MHKeypad::Press(position,false, alt2_offset); // Флаг сказал, что нужно тут же отжать
}
}
} // не противоположное направление
}
else if(-1==position)
//.........这里部分代码省略.........
开发者ID:MastaLomaster，项目名称:MHook，代码行数:101，代码来源:hh1.cpp
示例13: InvalidateRect
BOOL CWallDirListItem::Invalidate(BOOL bErase/* = TRUE*/)
{
return InvalidateRect(m_hWnd, NULL, bErase);
}
开发者ID:tsaikd，项目名称:MagicKD，代码行数:4，代码来源:WallDirListItem.cpp
示例14: GetItemRect
void CCheckListBox::InvalidateItem(int nIndex)
{
CRect rect;
GetItemRect(nIndex, rect);
InvalidateRect(rect, FALSE);
}
开发者ID:rickerliang，项目名称:OpenNT，代码行数:6，代码来源:winctrl3.cpp
示例15: InitLanguage
void CInfoDlg::OnTimer(UINT nIDEvent)
{
// TODO: Add your message handler code here and/or call default
if (nIDEvent == 1)
{
InitLanguage();
CRect rect;
int i =0;
int nSample = 0;
CString str1, str2,str3,str4;
AfxGetMainWnd()->GetWindowRect(&rect);
int width, high;
width = rect.Width();
high = rect.Height();
if (prv_nWidth >0&&prv_nHieght>0)
{
m_strInfo[0].Format("%d X %d", width, high);
m_strInfo[0]=m_strInfo[0]+" "+m_strRect;
m_strInfo[1].Format("%d X %d", prv_nWidth, prv_nHieght);
m_strInfo[1]=m_strInfo[1]+" "+m_strRect;
m_strInfo[2].Format("%d", g_Lost_frame);
m_strInfo[3].Format("%d", g_Total_frame);
m_strInfo[4].Format("%d kbps", g_Bit_rate);
m_strInfo[5].Format("%d f/s", g_Frame_rate);
m_strInfo[6].Format("H.264,%d X %d",prv_nWidth,prv_nHieght);
m_strInfo[7]=g_strUrl;
nSample = g_Samplerate/1000;
g_Samplerate = 0;
m_strInfo[8].Format("AAC,%s,%dKHz",m_strVedio,nSample);
for(i =0;i < 9;i++)
{
InvalidateRect(&m_rctext[i]);
}
}
else
{
width = 0;
high = 0;
g_Total_frame = 0;
g_Lost_frame = 0;
m_strInfo[0].Format("%d X %d", width, high);
m_strInfo[0]=m_strInfo[0]+" "+m_strRect;
m_strInfo[1].Format("%d X %d", prv_nWidth, prv_nHieght);
m_strInfo[1]=m_strInfo[1]+" "+m_strRect;
m_strInfo[2].Format("%d", g_Lost_frame);
m_strInfo[3].Format("%d", g_Total_frame);
m_strInfo[4].Format("%d kbps", g_Bit_rate);
m_strInfo[5].Format("%d f/s", g_Frame_rate);
m_strInfo[6].Format("H.264,%d X %d",prv_nWidth,prv_nHieght);
m_strInfo[7]=g_strUrl;
nSample = g_Samplerate/1000;
m_strInfo[8].Format("AAC,%s,%dKHz",m_strVedio,nSample);
for(i =0;i < 9;i++)
{
InvalidateRect(&m_rctext[i]);
}
}
InvalidateRect(&CRect(8,5,150,25));
for (i=0;i<8;i++)
{
InvalidateRect(&m_rcaption[i]);
}
}
CDialog::OnTimer(nIDEvent);
}
开发者ID:Lichanglu，项目名称:ENC-1260，代码行数:72，代码来源:InfoDlg.cpp
示例16: Sleep
//.........这里部分代码省略.........
vnclog.Print(LL_INTINFO, VNCLOG("SCR: new screen format %dx%dx%d\n"),
m_desktop->m_scrinfo.framebufferWidth,
m_desktop->m_scrinfo.framebufferHeight,
m_desktop->m_scrinfo.format.bitsPerPixel);
}
m_desktop->m_displaychanged = FALSE;
m_desktop->m_hookswitch = FALSE;
m_desktop->Hookdll_Changed = m_desktop->On_Off_hookdll; // Set the hooks again if necessary !
m_desktop->m_SWtoDesktop=FALSE;
//****************************************************************************
//************* SCREEN SIZE CHANGED
//****************************************************************************
if (screensize_changed)
{
vnclog.Print(LL_INTERR, VNCLOG("Size changed\n"));
POINT CursorPos;
m_desktop->SWinit();
m_desktop->GetQuarterSize();
GetCursorPos(&CursorPos);
CursorPos.x=g_dpi.UnscaleX(CursorPos.x);
CursorPos.y=g_dpi.UnscaleY(CursorPos.y);
CursorPos.x -= m_desktop->m_ScreenOffsetx;
CursorPos.y -= m_desktop->m_ScreenOffsety;
m_desktop->m_cursorpos.tl = CursorPos;
m_desktop->m_cursorpos.br = rfb::Point(GetSystemMetrics(SM_CXCURSOR),
GetSystemMetrics(SM_CYCURSOR)).translate(CursorPos);
m_server->SetSWOffset(m_desktop->m_SWOffsetx,m_desktop->m_SWOffsety);
// Adjust the UpdateTracker clip region
updates.set_clip_region(m_desktop->m_Cliprect);
m_desktop->m_buffer.ClearCache();
}
if (monitor_changed)
{
// we are using the driver, so a monitor change is a view change, like a special kind of single window
// m_desktop->current_monitor is the new monitor we want to see
// monitor size mymonitor[m_desktop->current_monitor-1]
// m_SWOffset is used by the encoders to send the correct coordinates to the viewer
// Cliprect, buffer coordinates
m_desktop->m_SWOffsetx=m_desktop->mymonitor[m_desktop->current_monitor-1].offsetx-m_desktop->mymonitor[2].offsetx;
m_desktop->m_SWOffsety=m_desktop->mymonitor[m_desktop->current_monitor-1].offsety-m_desktop->mymonitor[2].offsety;
m_server->SetSWOffset(m_desktop->m_SWOffsetx,m_desktop->m_SWOffsety);
m_desktop->m_Cliprect.tl.x=m_desktop->mymonitor[m_desktop->current_monitor-1].offsetx-m_desktop->mymonitor[2].offsetx;
m_desktop->m_Cliprect.tl.y=m_desktop->mymonitor[m_desktop->current_monitor-1].offsety-m_desktop->mymonitor[2].offsety;
m_desktop->m_Cliprect.br.x=m_desktop->mymonitor[m_desktop->current_monitor-1].offsetx+
m_desktop->mymonitor[m_desktop->current_monitor-1].Width-m_desktop->mymonitor[2].offsetx;
m_desktop->m_Cliprect.br.y=m_desktop->mymonitor[m_desktop->current_monitor-1].offsety+
m_desktop->mymonitor[m_desktop->current_monitor-1].Height-m_desktop->mymonitor[2].offsety;
vnclog.Print(LL_INTERR, VNCLOG("***********###############************ %i %i %i %i %i %i\n"),m_desktop->m_SWOffsetx,m_desktop->m_SWOffsety
,m_desktop->m_Cliprect.tl.x,m_desktop->m_Cliprect.tl.y,m_desktop->m_Cliprect.br.x,m_desktop->m_Cliprect.br.y);
rgncache.assign_union(rfb::Region2D(m_desktop->m_Cliprect));
updates.set_clip_region(m_desktop->m_Cliprect);
m_desktop->m_buffer.ClearCache();
m_desktop->m_buffer.BlackBack();
}
m_desktop->m_buffer.ClearCache();
m_desktop->m_buffer.BlackBack();
InvalidateRect(NULL,NULL,TRUE);
rgncache.assign_union(rfb::Region2D(m_desktop->m_Cliprect));
if (memcmp(&m_desktop->m_scrinfo.format, &oldscrinfo.format, sizeof(rfbPixelFormat)) != 0)
{
vnclog.Print(LL_INTERR, VNCLOG("Format changed\n"));
m_server->UpdatePalette(false); // changed no lock ok
m_server->UpdateLocalFormat(false); // changed no lock ok
}
if (screensize_changed)
{
screensize_changed=false;
m_server->SetNewSWSize(m_desktop->m_scrinfo.framebufferWidth,m_desktop->m_scrinfo.framebufferHeight,FALSE);//changed no lock ok
m_server->SetScreenOffset(m_desktop->m_ScreenOffsetx,m_desktop->m_ScreenOffsety,m_desktop->nr_monitors);// no lock ok
}
if (monitor_changed)
|
客服电话
APP下载
官方微信
请发表评论