本文整理汇总了C++中M函数的典型用法代码示例。如果您正苦于以下问题：C++ M函数的具体用法？C++ M怎么用？C++ M使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了M函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: sha256_hash_block
void sha256_hash_block(sha256_ctx *ctx, const unsigned char data[64], int perform_endian_swap)
{
ARCH_WORD_32 A, B, C, D, E, F, G, H, tmp, W[16];
#if ARCH_LITTLE_ENDIAN
int i;
if (perform_endian_swap) {
for (i = 0; i < 16; ++i)
W[i] = JOHNSWAP(*((ARCH_WORD_32*)&(data[i<<2])));
} else
#endif
memcpy(W, data, 16*sizeof(ARCH_WORD_32));
// Load state from all prior blocks (or init state)
A = ctx->h[0];
B = ctx->h[1];
C = ctx->h[2];
D = ctx->h[3];
E = ctx->h[4];
F = ctx->h[5];
G = ctx->h[6];
H = ctx->h[7];
R(A, B, C, D, E, F, G, H, W[ 0], 0x428A2F98);
R(H, A, B, C, D, E, F, G, W[ 1], 0x71374491);
R(G, H, A, B, C, D, E, F, W[ 2], 0xB5C0FBCF);
R(F, G, H, A, B, C, D, E, W[ 3], 0xE9B5DBA5);
R(E, F, G, H, A, B, C, D, W[ 4], 0x3956C25B);
R(D, E, F, G, H, A, B, C, W[ 5], 0x59F111F1);
R(C, D, E, F, G, H, A, B, W[ 6], 0x923F82A4);
R(B, C, D, E, F, G, H, A, W[ 7], 0xAB1C5ED5);
R(A, B, C, D, E, F, G, H, W[ 8], 0xD807AA98);
R(H, A, B, C, D, E, F, G, W[ 9], 0x12835B01);
R(G, H, A, B, C, D, E, F, W[10], 0x243185BE);
R(F, G, H, A, B, C, D, E, W[11], 0x550C7DC3);
R(E, F, G, H, A, B, C, D, W[12], 0x72BE5D74);
R(D, E, F, G, H, A, B, C, W[13], 0x80DEB1FE);
R(C, D, E, F, G, H, A, B, W[14], 0x9BDC06A7);
R(B, C, D, E, F, G, H, A, W[15], 0xC19BF174);
R(A, B, C, D, E, F, G, H, M(16), 0xE49B69C1);
R(H, A, B, C, D, E, F, G, M(17), 0xEFBE4786);
R(G, H, A, B, C, D, E, F, M(18), 0x0FC19DC6);
R(F, G, H, A, B, C, D, E, M(19), 0x240CA1CC);
R(E, F, G, H, A, B, C, D, M(20), 0x2DE92C6F);
R(D, E, F, G, H, A, B, C, M(21), 0x4A7484AA);
R(C, D, E, F, G, H, A, B, M(22), 0x5CB0A9DC);
R(B, C, D, E, F, G, H, A, M(23), 0x76F988DA);
R(A, B, C, D, E, F, G, H, M(24), 0x983E5152);
R(H, A, B, C, D, E, F, G, M(25), 0xA831C66D);
R(G, H, A, B, C, D, E, F, M(26), 0xB00327C8);
R(F, G, H, A, B, C, D, E, M(27), 0xBF597FC7);
R(E, F, G, H, A, B, C, D, M(28), 0xC6E00BF3);
R(D, E, F, G, H, A, B, C, M(29), 0xD5A79147);
R(C, D, E, F, G, H, A, B, M(30), 0x06CA6351);
R(B, C, D, E, F, G, H, A, M(31), 0x14292967);
R(A, B, C, D, E, F, G, H, M(32), 0x27B70A85);
R(H, A, B, C, D, E, F, G, M(33), 0x2E1B2138);
R(G, H, A, B, C, D, E, F, M(34), 0x4D2C6DFC);
R(F, G, H, A, B, C, D, E, M(35), 0x53380D13);
R(E, F, G, H, A, B, C, D, M(36), 0x650A7354);
R(D, E, F, G, H, A, B, C, M(37), 0x766A0ABB);
R(C, D, E, F, G, H, A, B, M(38), 0x81C2C92E);
R(B, C, D, E, F, G, H, A, M(39), 0x92722C85);
R(A, B, C, D, E, F, G, H, M(40), 0xA2BFE8A1);
R(H, A, B, C, D, E, F, G, M(41), 0xA81A664B);
R(G, H, A, B, C, D, E, F, M(42), 0xC24B8B70);
R(F, G, H, A, B, C, D, E, M(43), 0xC76C51A3);
R(E, F, G, H, A, B, C, D, M(44), 0xD192E819);
R(D, E, F, G, H, A, B, C, M(45), 0xD6990624);
R(C, D, E, F, G, H, A, B, M(46), 0xF40E3585);
R(B, C, D, E, F, G, H, A, M(47), 0x106AA070);
R(A, B, C, D, E, F, G, H, M(48), 0x19A4C116);
R(H, A, B, C, D, E, F, G, M(49), 0x1E376C08);
R(G, H, A, B, C, D, E, F, M(50), 0x2748774C);
R(F, G, H, A, B, C, D, E, M(51), 0x34B0BCB5);
R(E, F, G, H, A, B, C, D, M(52), 0x391C0CB3);
R(D, E, F, G, H, A, B, C, M(53), 0x4ED8AA4A);
R(C, D, E, F, G, H, A, B, M(54), 0x5B9CCA4F);
R(B, C, D, E, F, G, H, A, M(55), 0x682E6FF3);
R(A, B, C, D, E, F, G, H, M(56), 0x748F82EE);
R(H, A, B, C, D, E, F, G, M(57), 0x78A5636F);
R(G, H, A, B, C, D, E, F, M(58), 0x84C87814);
R(F, G, H, A, B, C, D, E, M(59), 0x8CC70208);
R(E, F, G, H, A, B, C, D, M(60), 0x90BEFFFA);
R(D, E, F, G, H, A, B, C, M(61), 0xA4506CEB);
R(C, D, E, F, G, H, A, B, M(62), 0xBEF9A3F7);
R(B, C, D, E, F, G, H, A, M(63), 0xC67178F2);
// save state for usage in next block (or result if this was last block)
ctx->h[0] += A;
ctx->h[1] += B;
ctx->h[2] += C;
ctx->h[3] += D;
ctx->h[4] += E;
ctx->h[5] += F;
ctx->h[6] += G;
ctx->h[7] += H;
}
开发者ID:balidani，项目名称:JohnTheRipper，代码行数:97，代码来源:sha2.c
示例2: _mesa_transform_vector
/**
* Transform a 4-element row vector (1x4 matrix) by a 4x4 matrix. This
* function is used for transforming clipping plane equations and spotlight
* directions.
* Mathematically, u = v * m.
* Input: v - input vector
* m - transformation matrix
* Output: u - transformed vector
*/
void
_mesa_transform_vector( GLfloat u[4], const GLfloat v[4], const GLfloat m[16] )
{
const GLfloat v0 = v[0], v1 = v[1], v2 = v[2], v3 = v[3];
#define M(row,col) m[row + col*4]
u[0] = v0 * M(0,0) + v1 * M(1,0) + v2 * M(2,0) + v3 * M(3,0);
u[1] = v0 * M(0,1) + v1 * M(1,1) + v2 * M(2,1) + v3 * M(3,1);
u[2] = v0 * M(0,2) + v1 * M(1,2) + v2 * M(2,2) + v3 * M(3,2);
u[3] = v0 * M(0,3) + v1 * M(1,3) + v2 * M(2,3) + v3 * M(3,3);
#undef M
}
开发者ID:venkatarajasekhar，项目名称:Qt，代码行数:20，代码来源:m_matrix.c
示例3: _math_matrix_frustum
/**
* Apply a perspective projection matrix.
*
* \param mat matrix to apply the projection.
* \param left left clipping plane coordinate.
* \param right right clipping plane coordinate.
* \param bottom bottom clipping plane coordinate.
* \param top top clipping plane coordinate.
* \param nearval distance to the near clipping plane.
* \param farval distance to the far clipping plane.
*
* Creates the projection matrix and multiplies it with \p mat, marking the
* MAT_FLAG_PERSPECTIVE flag.
*/
void
_math_matrix_frustum( GLmatrix *mat,
GLfloat left, GLfloat right,
GLfloat bottom, GLfloat top,
GLfloat nearval, GLfloat farval )
{
GLfloat x, y, a, b, c, d;
GLfloat m[16];
x = (2.0F*nearval) / (right-left);
y = (2.0F*nearval) / (top-bottom);
a = (right+left) / (right-left);
b = (top+bottom) / (top-bottom);
c = -(farval+nearval) / ( farval-nearval);
d = -(2.0F*farval*nearval) / (farval-nearval); /* error? */
#define M(row,col) m[col*4+row]
M(0,0) = x; M(0,1) = 0.0F; M(0,2) = a; M(0,3) = 0.0F;
M(1,0) = 0.0F; M(1,1) = y; M(1,2) = b; M(1,3) = 0.0F;
M(2,0) = 0.0F; M(2,1) = 0.0F; M(2,2) = c; M(2,3) = d;
M(3,0) = 0.0F; M(3,1) = 0.0F; M(3,2) = -1.0F; M(3,3) = 0.0F;
#undef M
matrix_multf( mat, m, MAT_FLAG_PERSPECTIVE );
}
开发者ID:venkatarajasekhar，项目名称:Qt，代码行数:39，代码来源:m_matrix.c
示例4: EDSRSA
void EDSRSA(char *M_fname, char *n_fname, char *e_fname, char *d_fname)
{
std::ifstream in(M_fname);
int *M_hash = (int*)md5(&in), i;
BigInt M(intToChar(M_hash[3])), N(n_fname, false), E(e_fname, false), D(d_fname, false);
M *= BigInt("10000000000"); M += BigInt(intToChar(M_hash[2]));
M *= BigInt("10000000000"); M += BigInt(intToChar(M_hash[1]));
M *= BigInt("10000000000"); M += BigInt(intToChar(M_hash[0]));
BigInt Signature("1"), Encode("1");
BigInt DegreeNet[RNet];
DegreeNet[0] = M;
DegreeNet[0] %= N;
for(i = 1; i < RNet; i++)
{
DegreeNet[i] = DegreeNet[i-1] * DegreeNet[i-1];
DegreeNet[i] %= N;
}
BigInt degreeNum[RNet];
degreeNum[0] = BigInt("1");
for(int i = 1; i < RNet; i++)
degreeNum[i] = degreeNum[i-1] * BigInt("2");
BigInt I("0");
for(int j = RNet-1; j >= 0;)
{
if(D >= I + degreeNum[j])
{
Signature *= DegreeNet[j];
Signature %= N;
I += degreeNum[j];
}
else
j--;
}
/////////////////////////////
DegreeNet[0] = Signature;
DegreeNet[0] %= N;
for(i = 1; i < RNet; i++)
{
DegreeNet[i] = DegreeNet[i-1] * DegreeNet[i-1];
DegreeNet[i] %= N;
}
I = BigInt("0");
for(int j = RNet-1; j >= 0;)
{
if(E >= I + degreeNum[j])
{
Encode *= DegreeNet[j];
Encode %= N;
I += degreeNum[j];
}
else
j--;
}
/////////////////////////////
M.TextWrite("hash.txt");
Signature.TextWrite("signature.txt");
Encode.TextWrite("encode.txt");
if( M % N == Encode)
std::cout<<"OK\n";
else
std::cout<<"NOT OK\n";
}
开发者ID:Valentina-Ermolaeva-KI1102，项目名称:rsa，代码行数:62，代码来源:rsa.cpp
示例5: RGB
void CGuiToolButton::DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct)
{
CDC* pdc= CDC::FromHandle(lpDrawItemStruct->hDC);
CRect rc=lpDrawItemStruct->rcItem;
UINT uState=lpDrawItemStruct->itemState;
CBrush cb;
if( uState & ODS_SELECTED) //the button is pressed
{
if(m_StyleDisplay==GUISTYLE_2003 || m_StyleDisplay == GUISTYLE_2003MENUBTN)
cb.CreateSolidBrush(GuiDrawLayer::m_Theme? RGB(249,200,102):GuiDrawLayer::GetRGBPressBXP());
else
cb.CreateSolidBrush(GuiDrawLayer::GetRGBPressBXP());
}
else
if (m_bMouserOver)
{
if(m_StyleDisplay==GUISTYLE_2003 || m_StyleDisplay== GUISTYLE_2003MENUBTN)
cb.CreateSolidBrush(GuiDrawLayer::m_Theme? RGB(252,230,186):GuiDrawLayer::GetRGBFondoXP());
else
cb.CreateSolidBrush(GuiDrawLayer::GetRGBFondoXP());
}
else
{
if(m_StyleDisplay==GUISTYLE_2003)
{
if (m_Transparent && m_StyleDisplay )
cb.CreateStockObject(NULL_BRUSH);
else
{
CGradient M(CSize(rc.Width(),rc.Height()+1));
M.PrepareReverseVertTab(pdc,m_StyleDisplay);
M.Draw(pdc,rc.left,rc.top,0,0,rc.Width(),rc.Height(),SRCCOPY);
}
}
else
if (m_StyleDisplay== GUISTYLE_2003MENUBTN)
cb.CreateSolidBrush(GuiDrawLayer::GetRGBColorFace(m_StyleDisplay));
else
cb.CreateSolidBrush(m_clColor);
}
if (( uState & ODS_SELECTED) || m_bMouserOver )
{
pdc->Draw3dRect(rc,GuiDrawLayer::GetRGBCaptionXP(),GuiDrawLayer::GetRGBCaptionXP());
rc.DeflateRect(1,1);
}
else if(m_ScrollButton || m_bSimple)
{
pdc->Draw3dRect(rc,GuiDrawLayer::GetRGBColorShadow(),GuiDrawLayer::GetRGBColorShadow());
rc.DeflateRect(1,1);
}
if (m_Transparent )
pdc->FillRect(rc,&cb);
int calculodify;
calculodify=rc.Height()-(m_SizeImage.cy);
calculodify/=2;
int nHeigh=calculodify+(m_bShowDark?1:0);
int nWidth=m_ScrollButton?rc.Width()/2 :2;
CPoint m_point=CPoint(nWidth,nHeigh);
if (m_SizeImage.cx > 2)
{
if(m_bMouserOver == 1 && !(uState & ODS_DISABLED) && !(uState & ODS_SELECTED) && m_bShowDark)
{
CPoint p(m_point.x+1,m_point.y+1);
pdc->DrawState(p,m_SizeImage,m_Icon,DSS_MONO,CBrush (GuiDrawLayer::GetRGBColorShadow()));
m_point.x-=1; m_point.y-=1;
}
pdc->DrawState (m_point, m_SizeImage,m_Icon,
(uState==ODS_DISABLED?DSS_DISABLED:DSS_NORMAL),(CBrush*)NULL);
}
if (m_SizeText.cx > 2)
{
int nMode = pdc->SetBkMode(TRANSPARENT);
CRect rectletra=rc;
int nt=m_ScrollButton?0:8;
rectletra.left+=m_SizeImage.cx+nt;
CPoint pt=CSize(rectletra.top,rectletra.left);
if (uState & ODS_DISABLED)
pdc->DrawState(pt, m_SizeText, m_szText, DSS_DISABLED, TRUE, 0, (CBrush*)NULL);
else
{
if(m_bMouserOver != 1)
pdc->SetTextColor(m_clrFont);
pdc->DrawText(m_szText,rectletra,DT_SINGLELINE|DT_LEFT|DT_VCENTER);
}
pdc->SetBkMode(nMode);
}
// TODO: Add your code to draw the specified item
}
开发者ID:ZhaoboMeng，项目名称:k-line-print，代码行数:100，代码来源:GuiToolButton.cpp
示例6: game_init
void game_init(int ai)
{
static int once = 1;
int x, y;
BITMAP *tmp;
int bc = makecol(200, 150, 50);
clear_to_color(screen, makecol(0, 0, 0));
textout_centre(screen, font, "Generating&Caching Data", SCREEN_W / 2, 0, -1);
textout_centre(screen, font, "May take a while", SCREEN_W / 2, SCREEN_H / 2, -1);
textout_centre(screen, font, "(about 10 minutes for first run,", SCREEN_W / 2, SCREEN_H / 2 + 20, -1);
textout_centre(screen, font, "about 1 minute every first game,", SCREEN_W / 2, SCREEN_H / 2 + 40, -1);
textout_centre(screen, font, "few seconds else)", SCREEN_W / 2, SCREEN_H / 2 + 60, -1);
if (once) {
once = 0;
animdata[0] = load_gfx("gravburn", 48);
animdata[1] = load_gfx("shock", 48);
animdata[2] = load_gfx("fireball", 48);
animdata[3] = load_gfx("wheel", 48);
animdata[4] = load_gfx("glow", 32);
{
int a;
for (a = 0; a < ANIMS; a++) {
anim[a] = 0;
animlen[a] = dat_length(animdata[a]);
}
}
tower = dat[TOWER_BMP].dat;
explosion = dat[EXPLOSION_WAV].dat;
radiating = dat[RADIATING_WAV].dat;
teleport = dat[TELEPORT_WAV].dat;
bonus = dat[BONUS_WAV].dat;
nuclearegg = dat[NUCLEAREGG_BMP].dat;
launcher = dat[LAUNCHER_BMP].dat;
bonuspic[0] = dat[BONUS0_BMP].dat;
bonuspic[1] = dat[BONUS1_BMP].dat;
bonuspic[2] = dat[BONUS2_BMP].dat;
map = create_bitmap(SCREEN_W, SCREEN_H);
}
ignore[0] = 0;
ignore[1] = 0;
think[0] = 0;
think[1] = 0;
memorized[0] = 0;
memorized[1] = 0;
AI[0] = 0;
if (ai) AI[1] = 1; else AI[1] = 0;
power[0] = 0;
power[1] = 0;
bonusnum = 0;
life[0] = 100;
life[1] = 100;
go = 0;
turn = 0;
tmp = create_bitmap_ex(32, SCREEN_W, SCREEN_H);
draw_back(tmp);
for (y = 0; y < 16; y++) {
for (x = 0; x < 16; x++) {
hills[y][x] = rnd();
}
}
basex[0] = 4 * TW + TW / 2;
basey[0] = 4 * TH + TH / 2;
basex[1] = 12 * TW + TW / 2;
basey[1] = 12 * TH + TH / 2;
hills[4][4] = 1;
hills[5][4] = 1;
hills[5][5] = 1;
hills[4][5] = 1;
hills[12][12] = 1;
hills[13][12] = 1;
hills[13][13] = 1;
hills[12][13] = 1;
x = rnd() * 16;
y = rnd() * 16;
for (y = 0; y < MH; y++) {
for (x = 0; x < MW; x++) {
int c = 0;
int t;
float height = get_height(x, y);
float h = 0, z = height * ZZZ;
for (h = height, t = 0; z > 0 && t < 2; z--, h -= 1.0 / (float)ZZZ, t++) {
int r, g, b;
float l;
if (h < 0.2) {
float p = h / 0.2;
//.........这里部分代码省略.........
开发者ID:stavrossk，项目名称:EggHack，代码行数:101，代码来源:game.c
示例7: prima_one_loop_round
Bool
prima_one_loop_round( Bool wait, Bool careOfApplication)
{
XEvent ev, next_event;
fd_set read_set, write_set, excpt_set;
struct timeval timeout;
int r, i, queued_events;
PTimerSysData timer;
if ( guts. applicationClose) return false;
if (( queued_events = XEventsQueued( DISP, QueuedAlready))) {
goto FetchAndProcess;
}
read_set = guts.read_set;
write_set = guts.write_set;
excpt_set = guts.excpt_set;
if ( guts. oldest) {
gettimeofday( &timeout, nil);
if ( guts. oldest-> when. tv_sec < timeout. tv_sec ||
( guts. oldest-> when. tv_sec == timeout. tv_sec &&
guts. oldest-> when. tv_usec <= timeout. tv_usec)) {
timer = guts. oldest;
apc_timer_start( timer-> who);
if ( timer-> who == CURSOR_TIMER) {
prima_cursor_tick();
} else if ( timer-> who == MENU_TIMER) {
apc_timer_stop( MENU_TIMER);
if ( guts. currentMenu) {
XEvent ev;
ev. type = MenuTimerMessage;
prima_handle_menu_event( &ev, M(guts. currentMenu)-> w-> w, guts. currentMenu);
}
} else if ( timer-> who == MENU_UNFOCUS_TIMER) {
prima_end_menu();
} else {
prima_simple_message( timer-> who, cmTimer, false);
}
gettimeofday( &timeout, nil);
}
if ( guts. oldest && wait) {
if ( guts. oldest-> when. tv_sec < timeout. tv_sec) {
timeout. tv_sec = 0;
timeout. tv_usec = 0;
} else {
timeout. tv_sec = guts. oldest-> when. tv_sec - timeout. tv_sec;
if ( guts. oldest-> when. tv_usec < timeout. tv_usec) {
if ( timeout. tv_sec == 0) {
timeout. tv_sec = 0;
timeout. tv_usec = 0;
} else {
timeout. tv_sec--;
timeout. tv_usec = 1000000 - (timeout. tv_usec - guts. oldest-> when. tv_usec);
}
} else {
timeout. tv_usec = guts. oldest-> when. tv_usec - timeout. tv_usec;
}
}
if ( timeout. tv_sec > 0 || timeout. tv_usec > 200000) {
timeout. tv_sec = 0;
timeout. tv_usec = 200000;
}
} else {
timeout. tv_sec = 0;
if ( wait)
timeout. tv_usec = 200000;
else
timeout. tv_usec = 0;
}
} else {
timeout. tv_sec = 0;
if ( wait)
timeout. tv_usec = 200000;
else
timeout. tv_usec = 0;
}
if (( r = select( guts.max_fd+1, &read_set, &write_set, &excpt_set, &timeout)) > 0 &&
FD_ISSET( guts.connection, &read_set)) {
if (( queued_events = XEventsQueued( DISP, QueuedAfterFlush)) <= 0) {
/* just like tcl/perl tk do, to avoid an infinite loop */
RETSIGTYPE oldHandler = signal( SIGPIPE, SIG_IGN);
XNoOp( DISP);
XFlush( DISP);
(void) signal( SIGPIPE, oldHandler);
}
FetchAndProcess:
if ( queued_events && ( application || !careOfApplication)) {
XNextEvent( DISP, &ev);
XCHECKPOINT;
queued_events--;
while ( queued_events > 0) {
if (!application && careOfApplication) return false;
XNextEvent( DISP, &next_event);
XCHECKPOINT;
prima_handle_event( &ev, &next_event);
guts. total_events++;
queued_events = XEventsQueued( DISP, QueuedAlready);
memcpy( &ev, &next_event, sizeof( XEvent));
}
if (!application && careOfApplication) return false;
//.........这里部分代码省略.........
开发者ID:Teslos，项目名称:Prima，代码行数:101，代码来源:apc_app.c
示例8: glOrtho
void glOrtho( GLfloat left, GLfloat right, GLfloat bottom, GLfloat top,
GLfloat near_val, GLfloat far_val )
{
GLfloat mat[16];
if( left == right || bottom == top || near_val == far_val )
return;
#define M(row,col) mat[col * 4 + row]
M(0,0) = 2.0f / (right - left);
M(0,1) = 0.0f;
M(0,2) = 0.0f;
M(0,3) = -(right + left) / (right - left);
M(1,0) = 0.0f;
M(1,1) = 2.0f / (top - bottom);
M(1,2) = 0.0f;
M(1,3) = -(top + bottom) / (top - bottom);
M(2,0) = 0.0f;
M(2,1) = 0.0f;
M(2,2) = -2.0f / (far_val - near_val);
M(2,3) = -(far_val + near_val) / (far_val - near_val);
M(3,0) = 0.0f;
M(3,1) = 0.0f;
M(3,2) = 0.0f;
M(3,3) = 1.0f;
ur_matrixMult( matrixTop, mat, matrixTop );
}
开发者ID:0branch，项目名称:boron，代码行数:32，代码来源:es_compat.c
示例9: gl_pick_matrix
//glu pick matrix implementation borrowed from Mesa3D
glh::matrix4f gl_pick_matrix(GLfloat x, GLfloat y, GLfloat width, GLfloat height, GLint* viewport)
{
GLfloat m[16];
GLfloat sx, sy;
GLfloat tx, ty;
sx = viewport[2] / width;
sy = viewport[3] / height;
tx = (viewport[2] + 2.f * (viewport[0] - x)) / width;
ty = (viewport[3] + 2.f * (viewport[1] - y)) / height;
#define M(row,col) m[col*4+row]
M(0,0) = sx; M(0,1) = 0.f; M(0,2) = 0.f; M(0,3) = tx;
M(1,0) = 0.f; M(1,1) = sy; M(1,2) = 0.f; M(1,3) = ty;
M(2,0) = 0.f; M(2,1) = 0.f; M(2,2) = 1.f; M(2,3) = 0.f;
M(3,0) = 0.f; M(3,1) = 0.f; M(3,2) = 0.f; M(3,3) = 1.f;
#undef M
return glh::matrix4f(m);
}
开发者ID:djdevil1989，项目名称:Luna-Viewer，代码行数:21，代码来源:llviewercamera.cpp
示例10: draw_spiral
static cairo_time_t
draw_spiral (cairo_t *cr,
cairo_fill_rule_t fill_rule,
align_t align,
close_t close,
int width, int height, int loops)
{
int i;
int n=0;
double x[MAX_SEGMENTS];
double y[MAX_SEGMENTS];
int step = 3;
int side = width < height ? width : height;
assert(5*(side/step/2+1)+2 < MAX_SEGMENTS);
#define L(x_,y_) (x[n] = (x_), y[n] = (y_), n++)
#define M(x_,y_) L(x_,y_)
#define v(t) L(x[n-1], y[n-1] + (t))
#define h(t) L(x[n-1] + (t), y[n-1])
switch (align) {
case PIXALIGN: M(0,0); break;
case NONALIGN: M(0.1415926, 0.7182818); break;
}
while (side >= step && side >= 0) {
v(side);
h(side);
v(-side);
h(-side+step);
v(step);
side -= 2*step;
}
switch (close) {
case RECTCLOSE: L(x[n-1],y[0]); break;
case DIAGCLOSE: L(x[0],y[0]); break;
}
assert(n < MAX_SEGMENTS);
cairo_save (cr);
cairo_set_source_rgb (cr, 0, 0, 0);
cairo_paint (cr);
cairo_translate (cr, 1, 1);
cairo_set_fill_rule (cr, fill_rule);
cairo_set_source_rgb (cr, 1, 0, 0);
cairo_new_path (cr);
cairo_move_to (cr, x[0], y[0]);
for (i = 1; i < n; i++) {
cairo_line_to (cr, x[i], y[i]);
}
cairo_close_path (cr);
cairo_perf_timer_start ();
cairo_perf_set_thread_aware (cr, FALSE);
while (loops--) {
if (loops == 0)
cairo_perf_set_thread_aware (cr, TRUE);
cairo_fill_preserve (cr);
}
cairo_perf_timer_stop ();
cairo_restore (cr);
return cairo_perf_timer_elapsed ();
}
开发者ID:csyuschmjuh，项目名称:apl，代码行数:71，代码来源:spiral.c
示例11: plot_freqs
static int plot_freqs(AVFilterLink *inlink, AVFrame *in)
{
AVFilterContext *ctx = inlink->dst;
AVFilterLink *outlink = ctx->outputs[0];
ShowFreqsContext *s = ctx->priv;
const int win_size = s->win_size;
char *colors, *color, *saveptr = NULL;
AVFrame *out;
int ch, n;
out = ff_get_video_buffer(outlink, outlink->w, outlink->h);
if (!out)
return AVERROR(ENOMEM);
for (n = 0; n < outlink->h; n++)
memset(out->data[0] + out->linesize[0] * n, 0, outlink->w * 4);
/* fill FFT input with the number of samples available */
for (ch = 0; ch < s->nb_channels; ch++) {
const float *p = (float *)in->extended_data[ch];
for (n = 0; n < in->nb_samples; n++) {
s->fft_data[ch][n].re = p[n] * s->window_func_lut[n];
s->fft_data[ch][n].im = 0;
}
for (; n < win_size; n++) {
s->fft_data[ch][n].re = 0;
s->fft_data[ch][n].im = 0;
}
}
/* run FFT on each samples set */
for (ch = 0; ch < s->nb_channels; ch++) {
av_fft_permute(s->fft, s->fft_data[ch]);
av_fft_calc(s->fft, s->fft_data[ch]);
}
#define RE(x, ch) s->fft_data[ch][x].re
#define IM(x, ch) s->fft_data[ch][x].im
#define M(a, b) (sqrt((a) * (a) + (b) * (b)))
colors = av_strdup(s->colors);
if (!colors) {
av_frame_free(&out);
return AVERROR(ENOMEM);
}
for (ch = 0; ch < s->nb_channels; ch++) {
uint8_t fg[4] = { 0xff, 0xff, 0xff, 0xff };
int prev_y = -1, f;
double a;
color = av_strtok(ch == 0 ? colors : NULL, " |", &saveptr);
if (color)
av_parse_color(fg, color, -1, ctx);
a = av_clipd(M(RE(0, ch), 0) / s->scale, 0, 1);
plot_freq(s, ch, a, 0, fg, &prev_y, out, outlink);
for (f = 1; f < s->nb_freq; f++) {
a = av_clipd(M(RE(f, ch), IM(f, ch)) / s->scale, 0, 1);
plot_freq(s, ch, a, f, fg, &prev_y, out, outlink);
}
}
av_free(colors);
out->pts = in->pts;
return ff_filter_frame(outlink, out);
}
开发者ID:MAXsundai，项目名称:FFmpeg，代码行数:70，代码来源:avf_showfreqs.c
示例12: ad_exit
/**
* Description not yet available.
* \param
*/
void laplace_approximation_calculator::generate_antithetical_rvs()
{
// number of random vectors
const ivector & itmp=(*num_local_re_array)(1,num_separable_calls);
//const ivector & itmpf=(*num_local_fixed_array)(1,num_separable_calls);
for (int i=2;i<=num_separable_calls;i++)
{
if (itmp(i) != itmp(i-1))
{
cerr << "At present can only use antithetical rv's when "
"all separable calls are the same size" << endl;
ad_exit(1);
}
}
int n=itmp(1);
int samplesize=num_importance_samples;
// mesh size
double delta=0.01;
// maximum of distribution is near here
double mid=sqrt(double(n-1));
dmatrix weights(1,2*n,1,2);
double spread=15;
if (mid-spread<=0.001)
spread=mid-0.1;
double ssum=0.0;
double x=0.0;
double tmax=(n-1)*log(mid)-0.5*mid*mid;
for (x=mid-spread;x<=mid+spread;x+=delta)
{
ssum+=exp((n-1)*log(x)-0.5*x*x-tmax);
}
double tsum=0;
dvector dist(1,samplesize+1);
dist.initialize();
int is=0;
int ii;
for (x=mid-spread;x<=mid+spread;x+=delta)
{
tsum+=exp((n-1)*log(x)-0.5*x*x-tmax)/ssum*samplesize;
int ns=int(tsum);
for (ii=1;ii<=ns;ii++)
{
dist(++is)=x;
}
tsum-=ns;
}
if (is==samplesize-1)
{
dist(samplesize)=mid;
}
else if (is<samplesize-1)
{
cerr << "This can't happen" << endl;
exit(1);
}
// get random numbers
random_number_generator rng(rseed);
if (antiepsilon)
{
if (allocated(*antiepsilon))
{
delete antiepsilon;
antiepsilon=0;
}
}
antiepsilon=new dmatrix(1,samplesize,1,n);
dmatrix & M=*antiepsilon;
M.fill_randn(rng);
for (int i=1;i<=samplesize;i++)
{
M(i)=M(i)/norm(M(i));
}
int nvar=(samplesize-1)*n;
independent_variables xx(1,nvar);
ii=0;
for (int i=2;i<=samplesize;i++)
{
for (int j=1;j<=n;j++)
{
xx(++ii)=M(i,j);
}
}
fmmt1 fmc(nvar,5);
//fmm fmc(nvar,5);
fmc.noprintx=1;
fmc.iprint=10;
fmc.maxfn=2500;
fmc.crit=1.e-6;
double f;
double fbest=1.e+50;;
//.........这里部分代码省略.........
开发者ID:fishfollower，项目名称:admb，代码行数:101，代码来源:df1b2lp8.cpp
示例13: rowsize
/**
* Description not yet available.
* \param
*/
imatrix laplace_approximation_calculator::check_sparse_matrix_structure(void)
{
ivector rowsize(1,usize);
rowsize.initialize();
imatrix tmp(1,usize,1,usize);
tmp.initialize();
for (int ii=1;ii<=num_separable_calls;ii++)
{
if (allocated((*derindex)(ii)))
{
ivector iv = sort((*derindex)(ii));
int n=iv.indexmax();
if (n>1) // so we have off diagonal elements
{
for (int i=1;i<=n;i++)
{
int row=iv(i);
for (int j=1;j<=n;j++)
{
if (i != j)
{
int col=iv(j);
int foundmatch=0;
for (int k=1;k<=rowsize(row);k++)
{
if (tmp(row,k)==col)
{
foundmatch=1;
break;
}
}
if (foundmatch==0) // add a new element to tmp(row)
{
rowsize(row)++;
if (rowsize(row)> tmp(row).indexmax())
{
tmp(row).reallocate(2); // double the size
}
tmp(row,rowsize(row))=col;
}
}
}
}
}
}
}
imatrix M(1,usize,1,rowsize);
ofstream ofs("sparseness.info");
ofs << "# Number of parameters" << endl;
ofs << usize << endl;
ofs << "# Number of off diagonal elements in each row" << endl;
ofs << rowsize << endl;
ofs << "# The nonempty rows of M" << endl;
for (int i=1;i<=usize;i++)
{
if (rowsize(i)>0)
{
M(i)=sort(tmp(i)(1,rowsize(i)));
ofs << setw(4) << M(i) << endl;
}
}
return M;
}
开发者ID:fishfollower，项目名称:admb，代码行数:68，代码来源:df1b2lp8.cpp
示例14: F
void HeatTransfer::mass_residual( bool compute_jacobian,
AssemblyContext& context,
CachedValues& /*cache*/ )
{
#ifdef GRINS_USE_GRVY_TIMERS
this->_timer->BeginTimer("HeatTransfer::mass_residual");
#endif
// First we get some references to cell-specific data that
// will be used to assemble the linear system.
// Element Jacobian * quadrature weights for interior integration
const std::vector<libMesh::Real> &JxW =
context.get_element_fe(_temp_vars.T_var())->get_JxW();
// The shape functions at interior quadrature points.
const std::vector<std::vector<libMesh::Real> >& phi =
context.get_element_fe(_temp_vars.T_var())->get_phi();
const std::vector<libMesh::Point>& u_qpoint =
context.get_element_fe(this->_flow_vars.u_var())->get_xyz();
// The number of local degrees of freedom in each variable
const unsigned int n_T_dofs = context.get_dof_indices(_temp_vars.T_var()).size();
// The subvectors and submatrices we need to fill:
libMesh::DenseSubVector<libMesh::Real> &F = context.get_elem_residual(_temp_vars.T_var());
libMesh::DenseSubMatrix<libMesh::Real> &M = context.get_elem_jacobian(_temp_vars.T_var(), _temp_vars.T_var());
unsigned int n_qpoints = context.get_element_qrule().n_points();
for (unsigned int qp = 0; qp != n_qpoints; ++qp)
{
// For the mass residual, we need to be a little careful.
// The time integrator is handling the time-discretization
// for us so we need to supply M(u_fixed)*u for the residual.
// u_fixed will be given by the fixed_interior_* functions
// while u will be given by the interior_* functions.
libMesh::Real T_dot = context.interior_value(_temp_vars.T_var(), qp);
const libMesh::Number r = u_qpoint[qp](0);
libMesh::Real jac = JxW[qp];
if( _is_axisymmetric )
{
jac *= r;
}
for (unsigned int i = 0; i != n_T_dofs; ++i)
{
F(i) += _rho*_Cp*T_dot*phi[i][qp]*jac;
if( compute_jacobian )
{
for (unsigned int j=0; j != n_T_dofs; j++)
{
// We're assuming rho, cp are constant w.r.t. T here.
M(i,j) += _rho*_Cp*phi[j][qp]*phi[i][qp]*jac;
}
}// End of check on Jacobian
} // End of element dof loop
} // End of the quadrature point loop
#ifdef GRINS_USE_GRVY_TIMERS
this->_timer->EndTimer("HeatTransfer::mass_residual");
#endif
return;
}
开发者ID:SylvainPlessis，项目名称:grins，代码行数:73，代码来源:heat_transfer.C
示例15: ResInt
//.........这里部分代码省略.........
{
double f0 = L0.get(i,m,k);
double f1 = L1.get(i,m,k);
double f2 = L2.get(i,m,k);
double f3 = L3.get(i,m,k);
double f4 = L4.get(i,m,k);
double tmp = (dt/480.0)*((23.0+4.0*sq2)*f0 + (-13.0*sq2+64.0)*f1
+ (-72.0*sq2+96.0)*f2 + (-43.0*sq2+64.0)*f3
+ (-7.0+4.0*sq2)*f4);
ILout.set(i,m,k,1, tmp );
tmp = (sq2*dt/960.0)*((-8.0-15.0*sq2)*f0 + 146.0*f1
+ 144.0*f2 - 34.0*f3
+ (-8.0+15.0*sq2)*f4);
ILout.set(i,m,k,2, tmp );
tmp = (sq2*dt/960.0)*((-8.0+15.0*sq2)*f0 - 34.0*f1
+ 144.0*f2 + 146.0*f3
+ (-8.0-15.0*sq2)*f4);
ILout.set(i,m,k,3, tmp );
tmp = (dt/480.0)*((-7.0+4.0*sq2)*f0 + (-43.0*sq2+64.0)*f1
+ (-72.0*sq2+96.0)*f2 + (-13.0*sq2+64.0)*f3
+ (23.0+4.0*sq2)*f4);
ILout.set(i,m,k,4, tmp );
}
break;
case 6:
// integrate the right hand side for each subinterval:
dTensor2 M(6,5);
M.set(1,1, 19.0/288.0);
M.set(1,2, -3.0/800.0);
M.set(1,3, 11.0/7200.0);
M.set(1,4, -11.0/7200.0);
M.set(1,5, 3.0/800.0);
M.set(2,1, 1427.0/7200.0);
M.set(2,2, 637.0/7200.0);
M.set(2,3, -31.0/2400.0);
M.set(2,4, 77.0/7200.0);
M.set(2,5, -173.0/7200.0);
M.set(3,1, -133.0/1200.0);
M.set(3,2, 511.0/3600.0);
M.set(3,3, 401.0/3600.0);
M.set(3,4, -43.0/1200.0);
M.set(3,5, 241.0/3600.0);
M.set(4,1, 241.0/3600.0);
M.set(4,2, -43.0/1200.0);
M.set(4,3, 401.0/3600.0);
M.set(4,4, 511.0/3600.0);
M.set(4,5, -133.0/1200.0);
M.set(5,1, -173.0/7200.0);
M.set(5,2, 77.0/7200.0);
M.set(5,3, -31.0/2400.0);
M.set(5,4, 637.0/7200.0);
M.set(5,5, 1427.0/7200.0);
M.set(6,1, 3.0/800.0);
M.set(6,2, -11.0/7200.0);
M.set(6,3, 11.0/7200.0);
M.set(6,4, -3.0/800.0);
M.set(6,5, 19.0/288.0);
开发者ID:smoe1，项目名称:ImplicitExplicit，代码行数:66，代码来源:ResInt.cpp
示例16: deflat
void deflat(T& M, const Interface& i, double coef)
{
// deflate the Matrix
for (Interface::const_iterator omit=i.begin();omit!=i.end();++omit) {
for (Mesh::const_vertex_iterator vit1=omit->mesh().vertex_begin();vit1!=omit->mesh().vertex_end();++vit1) {
#pragma omp parallel for
#ifndef OPENMP_3_0
for (int i2=vit1-omit->mesh().vertex_begin();i2<omit->mesh().vertex_size();++i2) {
const Mesh::const_vertex_iterator vit2 = omit->mesh().vertex_begin()+i2;
#else
for (Mesh::const_vertex_iterator vit2=vit1;vit2<omit->mesh().vertex_end();++vit2) {
#endif
M((*vit1)->index(),(*vit2)->index()) += coef;
}
}
}
}
void assemble_HM(const Geometry& geo, SymMatrix& mat, const unsigned gauss_order)
{
mat = SymMatrix((geo.size()-geo.outermost_interface().nb_triangles()));
mat.set(0.0);
double K = 1.0 / (4.0 * M_PI);
// We iterate over the meshes (or pair of domains) to fill the lower half of the HeadMat (since its symmetry)
for ( Geometry::const_iterator mit1 = geo.begin(); mit1 != geo.end(); ++mit1) {
for ( Geometry::const_iterator mit2 = geo.begin(); (mit2 != (mit1+1)); ++mit2) {
// if mit1 and mit2 communicate, i.e they are used for the definition of a common domain
const int orientation = geo.oriented(*mit1, *mit2); // equals 0, if they don't have any domains in common
// equals 1, if they are both oriented toward the same domain
// equals -1, if they are not
if ( orientation != 0 ) {
double Scoeff = orientation * geo.sigma_inv(*mit1, *mit2) * K;
double Dcoeff = - orientation * geo.indicator(*mit1, *mit2) * K;
double Ncoeff;
if ( !(mit1->outermost() || mit2->outermost()) ) {
// Computing S block first because it's needed for the corresponding N block
operatorS(*mit1, *mit2, mat, Scoeff, gauss_order);
Ncoeff = geo.sigma(*mit1, *mit2)/geo.sigma_inv(*mit1, *mit2);
} else {
Ncoeff = orientation * geo.sigma(*mit1, *mit2) * K;
}
if ( !mit1->outermost() ) {
// Computing D block
operatorD(*mit1, *mit2, mat, Dcoeff, gauss_order,false);
}
if ( ( *mit1 != *mit2 ) && ( !mit2->outermost() ) ) {
// Computing D* block
operatorD(*mit1, *mit2, mat, Dcoeff, gauss_order, true);
}
// Computing N block
operatorN(*mit1, *mit2, mat, Ncoeff, gauss_order);
}
}
}
// Deflate the diagonal block (N33) of 'mat' : (in order to have a zero-mean potential for the outermost interface)
const Interface i = geo.outermost_interface();
unsigned i_first = (*i.begin()->mesh().vertex_begin())->index();
deflat(mat, i, mat(i_first, i_first) / (geo.outermost_interface().nb_vertices()));
}
开发者ID:bburle，项目名称:openmeeg，代码行数:68，代码来源:assembleHeadMat.cpp
示例17: G
G(GAME_EndWar, 224)
#endif
#if TERA
G(GAME_Tera, 568)
#endif
#if HUNTED
G(GAME_Hunted, 708) // real version is 709, which is incorrect
#endif
#if DND
G(GAME_DND, 673) // real version is 674
#endif
G(GAME_GoWJ, 828) // real version is 846
// Unreal engine 4
#if UNREAL4
M(0), M(1), M(2), M(3), M(4), M(5)
#endif
};
#undef G
#undef M
void FArchive::OverrideVersion()
{
int OldVer = ArVer;
int OldLVer = ArLicenseeVer;
for (int i = 0; i < ARRAY_COUNT(ue4versions); i++)
{
if (ue4versions[i].GameTag == Game)
开发者ID:whztt07，项目名称:UModel，代码行数:31，代码来源:GameDatabase.cpp
示例18: C
} keypad[PADKEYS] = {
{'y', 'Y', C('y')}, /* 7 */
{'k', 'K', C('k')}, /* 8 */
{'u', 'U', C('u')}, /* 9 */
{'m', C('p'), C('p')}, /* - */
{'h', 'H', C('h')}, /* 4 */
{'g', 'g', 'g'}, /* 5 */
{'l', 'L', C('l')}, /* 6 */
{'p', 'P', C('p')}, /* + */
{'b', 'B', C('b')}, /* 1 */
{'j', 'J', C('j')}, /* 2 */
{'n', 'N', C('n')}, /* 3 */
{'i', 'I', C('i')}, /* Ins */
{'.', ':', ':'} /* Del */
}, numpad[PADKEYS] = {
{'7', M('7'), '7'}, /* 7 */
{'8', M('8'), '8'}, /* 8 */
{'9', M('9'), '9'}, /* 9 */
{'m', C('p'), C('p')}, /* - */
{'4', M('4'), '4'}, /* 4 */
{'g', 'G', 'g'}, /* 5 */
{'6', M('6'), '6'}, /* 6 */
{'p', 'P', C('p')}, /* + */
{'1', M('1'), '1'}, /* 1 */
{'2', M('2'), '2'}, /* 2 */
{'3', M('3'), '3'}, /* 3 */
{'i', 'I', C('i')}, /* Ins */
{'.', ':', ':'} /* Del */
};
/*
开发者ID:Agyar，项目名称:NetHack，代码行数:31，代码来源:os2.c
示例19: X
DoubleVector RowDoubleMatrix::preconditionedConjugateGradient(const DoubleVector &B, double epsilon, unsigned int niter, bool printMessages, unsigned int messageStep) const
{
DoubleVector X(size_, 0.0); // начальное приближение - вектор нулей
DoubleVector resid(size_); // невязка
DoubleVector M(size_); // предусловие
DoubleVector Z(size_);
DoubleVector P(size_);
DoubleVector temp(size_); // ременное хранилище
double resid_norm;
for (size_type i = 0; i < size_; i++)
{
for (size_type j = 0; j < row_size_[i]; j++)
{
ColumnValuePair pair = data_[i][j];
if (pair.column == i)
{
M[i] = 1.0 / pair.value;
}
}
}
residual(X, B, resid);
resid_norm = resid.norm_2();
if (printMessages)
{
std::cout << "Метод сопряженных градиентов для решения предобусловленной СЛАУ" << std::endl;
std::cout << "Начальная невязка: " << resid_norm << std::endl;
}
if (resid_norm > epsilon)
{
double ha;
Z = M.dotProduct( resid ); // z_0
P = Z; // p_0
ha = (resid * Z);
for (unsigned int i = 0; i < niter; i++)
{
double alpha;
double beta;
double hanew;
product(P, temp);
alpha = ha / (P * temp);
X += alpha * P;
resid -= alpha * temp;
resid_norm = resid.norm_2();
if (resid_norm <= epsilon)
{
if (printMessages)
std::cout <
|
客服电话
APP下载
官方微信
请发表评论