C++ M2M_ERR函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中M2M_ERR函数的典型用法代码示例。如果您正苦于以下问题：C++ M2M_ERR函数的具体用法？C++ M2M_ERR怎么用？C++ M2M_ERR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了M2M_ERR函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: m2m_wifi_request_scan_ssid

sint8 m2m_wifi_request_scan_ssid(uint8 ch,char* pcssid)
{
	sint8	s8Ret = M2M_ERR_SCAN_IN_PROGRESS;

	if(!gu8scanInProgress)
	{
		tstrM2MScan strtmp;
		m2m_memset((uint8*)&strtmp,0,sizeof(tstrM2MScan));
		strtmp.u8ChNum = ch;
		if(pcssid)
		{
			uint8 len =	m2m_strlen((uint8 *)pcssid);
			m2m_memcpy(strtmp.au8SSID,(uint8 *)pcssid,len+1);
		}
		s8Ret = hif_send(M2M_REQ_GRP_WIFI, M2M_WIFI_REQ_SCAN, (uint8*)&strtmp, sizeof(tstrM2MScan),NULL, 0,0);

		if(s8Ret == M2M_SUCCESS)
		{
			gu8scanInProgress = 1;
		}
		else
		{
			M2M_ERR("SCAN Failed Ret = %d\n",s8Ret);
		}
	}
	else
	{
		M2M_ERR("SCAN In Progress\n");
	}
	return s8Ret;
}

开发者ID:zhengwang721，项目名称:ASF，代码行数:31，代码来源:m2m_wifi.c

示例2: m2m_validate_scan_options

static sint8 m2m_validate_scan_options(tstrM2MScanOption* ptstrM2MScanOption)
{
	sint8 s8Ret = M2M_SUCCESS;
	/* Check for incoming pointer */
	if(ptstrM2MScanOption == NULL)
	{
		M2M_ERR("INVALID POINTER\n");
		s8Ret = M2M_ERR_FAIL;
	}	
	/* Check for valid No of slots */
	 if(ptstrM2MScanOption->u8NumOfSlot < 1)
	{
		M2M_ERR("INVALID No of scan slots!\n");
		s8Ret = M2M_ERR_FAIL;
	}	
	/* Check for valid time of slots */
	 if(ptstrM2MScanOption->u8SlotTime < 1)
	{
		M2M_ERR("INVALID scan slot time!\n");
		s8Ret = M2M_ERR_FAIL;
	}	
	/* Check for valid No of probe requests per slot */
	 if((ptstrM2MScanOption->u8ProbesPerSlot < 0)||(ptstrM2MScanOption->u8ProbesPerSlot > M2M_SCAN_DEFAULT_NUM_PROBE))
	{
		M2M_ERR("INVALID No of probe requests per scan slot\n");
		s8Ret = M2M_ERR_FAIL;
	}	
	/* Check for valid RSSI threshold */
	 if((ptstrM2MScanOption->s8RssiThresh  < -99) || (ptstrM2MScanOption->s8RssiThresh >= 0))
	{
		M2M_ERR("INVALID RSSI threshold %d \n",ptstrM2MScanOption->s8RssiThresh);
		s8Ret = M2M_ERR_FAIL;
	}	
	return s8Ret;
}

开发者ID:JacobV90，项目名称:Embedded_Project，代码行数:35，代码来源:m2m_wifi.c

示例3: nm_drv_deinit

/*
*	@fn		nm_drv_deinit
*	@brief	Deinitialize NMC1000 driver
*	@author	M. Abdelmawla
*	@date	17 July 2012
*	@version	1.0
*/
sint8 nm_drv_deinit(void * arg)
{
    (void)arg; // Silence "unused" warning

    sint8 ret;

    ret = chip_deinit();
    if (M2M_SUCCESS != ret) {
        M2M_ERR("[nmi stop]: chip_deinit fail\n");
        goto ERR1;
    }

    ret = nm_bus_iface_deinit();
    if (M2M_SUCCESS != ret) {
        M2M_ERR("[nmi stop]: fail init bus\n");
        goto ERR1;
    }
#ifdef CONF_WINC_USE_SPI
    /* Must do this after global reset to set SPI data packet size. */
    nm_spi_deinit();
#endif

ERR1:
    return ret;
}

开发者ID:shampliu，项目名称:ideahacks，代码行数:32，代码来源:nmdrv.c

示例4: m2m_wifi_request_scan

sint8 m2m_wifi_request_scan(uint8 ch)
{
	sint8	s8Ret = M2M_ERR_SCAN_IN_PROGRESS;

	if(!gu8scanInProgress)
	{
		tstrM2MScan strtmp;
		strtmp.u8ChNum = ch;
		s8Ret = hif_send(M2M_REQ_GRP_WIFI, M2M_WIFI_REQ_SCAN, (uint8*)&strtmp, sizeof(tstrM2MScan),NULL, 0,0);

		if(s8Ret == M2M_SUCCESS)
		{
			gu8scanInProgress = 1;
		}
		else
		{
			M2M_ERR("SCAN Failed Ret = %d\n",s8Ret);
		}
	}
	else
	{
		M2M_ERR("SCAN In Progress\n");
	}
	return s8Ret;
}

开发者ID:InSoonPark，项目名称:asf，代码行数:25，代码来源:m2m_wifi.c

示例5: sslSetSockOpt

/*********************************************************************
Function
		setsockopt

Description

Return
		None.

Author
		Abdelrahman Diab

Version
		1.0

Date
		9 September 2014
*********************************************************************/
sint8 sslSetSockOpt(SOCKET sock, uint8  u8Opt, const void *pvOptVal, uint16 u16OptLen)
{
	sint8	s8Ret = SOCK_ERR_INVALID_ARG;
	if(sock < TCP_SOCK_MAX)
	{
		if(gastrSockets[sock].u8SSLFlags & SSL_FLAGS_ACTIVE)
		{
			if(u8Opt == SO_SSL_BYPASS_X509_VERIF)
			{
				int	optVal = *((int*)pvOptVal);
				if(optVal)
				{
					gastrSockets[sock].u8SSLFlags |= SSL_FLAGS_BYPASS_X509;
				}
				else
				{
					gastrSockets[sock].u8SSLFlags &= ~SSL_FLAGS_BYPASS_X509;
				}
				s8Ret = SOCK_ERR_NO_ERROR;
			}
			else if(u8Opt == SO_SSL_SNI)
			{
				if(u16OptLen < HOSTNAME_MAX_SIZE)
				{
					uint8					*pu8SNI = (uint8*)pvOptVal;
					tstrSSLSetSockOptCmd	strCmd;

					strCmd.sock			= sock;
					strCmd.u16SessionID	= gastrSockets[sock].u16SessionID;
					strCmd.u8Option		= u8Opt;
					strCmd.u32OptLen	= u16OptLen;
					m2m_memcpy(strCmd.au8OptVal, pu8SNI, HOSTNAME_MAX_SIZE);
					
					if(SOCKET_REQUEST(SOCKET_CMD_SSL_SET_SOCK_OPT, (uint8*)&strCmd, sizeof(tstrSSLSetSockOptCmd),
						0, 0, 0) == M2M_ERR_MEM_ALLOC)
					{
						s8Ret = SOCKET_REQUEST(SOCKET_CMD_SSL_SET_SOCK_OPT | M2M_REQ_DATA_PKT, 
							(uint8*)&strCmd, sizeof(tstrSSLSetSockOptCmd), 0, 0, 0);
					}
					s8Ret = SOCK_ERR_NO_ERROR;
				}
				else
				{
					M2M_ERR("SNI Exceeds Max Length\n");
				}
			}
			else
			{
				M2M_ERR("Unknown SSL Socket Option %d\n",u8Opt);
			}
		}
		else
		{
			M2M_ERR("Not SSL Socket\n");
		}
	}
	return s8Ret;
}

开发者ID:TobiasBog100，项目名称:Arduino，代码行数:76，代码来源:socket.c

示例6: nm_uart_reconfigure

/**
*	@fn			nm_uart_reconfigure
*	@brief		Reconfigures the UART interface
*	@param [in]	ptr
*				Pointer to a DWORD containing baudrate at this moment.
*	@return		M2M_SUCCESS in case of success and M2M_ERR_BUS_FAIL in case of failure
*	@author		Viswanathan Murugesan
*	@date		22 OCT 2014
*	@version	1.0
*/
sint8 nm_uart_reconfigure(void *ptr)
{
	tstrNmUartDefault strUart;
	sint8 s8Ret = M2M_SUCCESS;
	uint8 b[HDR_SZ+1];

	/*write reg*/
	b[0] = 0xa5;
	b[1] = 5;
	b[2] = 0;
	b[3] = 0;
	b[4] = 0;
	b[5] = 0;
	b[6] = 0;
	b[7] = 0;
	b[8] = 0;
	b[9] = (uint8)((*(unsigned long *)ptr) & 0x000000ff);
	b[10] = (uint8)(((*(unsigned long *)ptr) & 0x0000ff00)>>8);
	b[11] = (uint8)(((*(unsigned long *)ptr) & 0x00ff0000)>>16);
	b[12] = (uint8)(((*(unsigned long *)ptr) & 0xff000000)>>24);

	b[2] = get_cs(&b[1],HDR_SZ);

	get_cs(&b[1],HDR_SZ);

	strUart.pu8Buf = b;
	strUart.u16Sz = sizeof(b);

	if(M2M_SUCCESS != nm_bus_ioctl(NM_BUS_IOCTL_W, &strUart))
	{
		M2M_ERR("write error\n");
		s8Ret = M2M_ERR_BUS_FAIL;
	}
	else
	{
		if(!nm_bus_get_chip_type())
		{
			//check for the ack from the SAMD21 for the packet reception.
			strUart.u16Sz = 1;
			if(M2M_SUCCESS != nm_bus_ioctl(NM_BUS_IOCTL_R, &strUart))
			{
				s8Ret = M2M_ERR_BUS_FAIL;
			}
			if(b[0] == 0xAC)
			{
				M2M_DBG("Successfully sent the UART reconfigure command\n");
			}
			else
			{
				M2M_ERR("write error\n");
				s8Ret = M2M_ERR_BUS_FAIL;
			}
		}
	}

	return s8Ret;
}

开发者ID:bedomo，项目名称:thethings.iO-atmel-sdk，代码行数:67，代码来源:nmuart.c

示例7: m2m_ota_test

NMI_API sint8 m2m_ota_test(void)
{
	uint32 page  = 0;
	uint8 buffer[1500];
	uint32 u32Sz = 0;
	sint8 ret = M2M_SUCCESS;
	FILE *fp =NULL;
	fp = fopen(M2M_OTA_FILE,"rb");
	if(fp)
	{
		fseek(fp, 0L, SEEK_END);
		u32Sz = ftell(fp);
		fseek(fp, 0L, SEEK_SET);

		while(u32Sz > 0)
		{
			{
				page = (rand()%1400);

				if((page<100)||(page>1400)) page  = 1400;
			}

			if(u32Sz>page)
			{
				u32Sz-=page;
			}
			else
			{
				page = u32Sz;
				u32Sz = 0;
			}
			printf("page %d\n", (int)page);
			fread(buffer,page,1,fp);
			ret = hif_send(M2M_REQ_GROUP_OTA,M2M_OTA_REQ_TEST|M2M_REQ_DATA_PKT,NULL,0,(uint8*)&buffer,page,0);
			if(ret != M2M_SUCCESS)
			{
				M2M_ERR("\n");
			}
			nm_bsp_sleep(1);
		}

	}
	else
	{
		M2M_ERR("nO err\n");
	}
	return ret;
}

开发者ID:zhengwang721，项目名称:ASF，代码行数:48，代码来源:m2m_ota.c

示例8: nm_i2c_write_block

/*
*	@fn		nm_i2c_write_block
*	@brief	Write block of data
*	@param [in]	u32Addr
*				Start address
*	@param [in]	puBuf
*				Pointer to the buffer holding the data to be written
*	@param [in]	u16Sz
*				Number of bytes to write. The buffer size must be >= u16Sz
*	@return	M2M_SUCCESS in case of success and M2M_ERR_BUS_FAIL in case of failure
*	@author	M. Abdelmawla
*	@date	11 July 2012
*	@version	1.0
*/
sint8 nm_i2c_write_block(uint32 u32Addr, uint8 *pu8Buf, uint16 u16Sz)
{
	uint8 au8Buf[7];
	tstrNmI2cSpecial strI2c;
	sint8 s8Ret = M2M_SUCCESS;

	au8Buf[0] = 0x12;
	au8Buf[1] = (uint8)(u32Addr >> 24);
	au8Buf[2] = (uint8)(u32Addr >> 16);
	au8Buf[3] = (uint8)(u32Addr >> 8);
	au8Buf[4] = (uint8)(u32Addr);
	au8Buf[5] = (uint8)(u16Sz >> 8);
	au8Buf[6] = (uint8)(u16Sz);

	strI2c.pu8Buf1 = au8Buf;
	strI2c.pu8Buf2 = pu8Buf;
	strI2c.u16Sz1 = sizeof(au8Buf);
	strI2c.u16Sz2 = u16Sz;

	if(M2M_SUCCESS != nm_bus_ioctl(NM_BUS_IOCTL_W_SPECIAL, &strI2c))
	{
		M2M_ERR("write error\n");
		s8Ret = M2M_ERR_BUS_FAIL;
	}

	return s8Ret;
}

开发者ID:runtimeinc，项目名称:mynewt_arduino_zero，代码行数:41，代码来源:nmi2c.c

示例9: chip_reset_and_cpu_halt

sint8 chip_reset_and_cpu_halt(void)
{
	sint8 ret = M2M_SUCCESS;
	uint32 reg = 0;

	ret = chip_wake();
	if(ret != M2M_SUCCESS) {
		return ret;
	}
	chip_reset();
	ret = nm_read_reg_with_ret(0x1118, &reg);
	if (M2M_SUCCESS != ret) {
		ret = M2M_ERR_BUS_FAIL;
		M2M_ERR("[nmi start]: fail read reg 0x1118 ...\n");
	}
	reg |= (1 << 0);
	ret = nm_write_reg(0x1118, reg);
	ret += nm_read_reg_with_ret(NMI_GLB_RESET_0, &reg);
	if ((reg & (1ul << 10)) == (1ul << 10)) {
		reg &= ~(1ul << 10);
		ret += nm_write_reg(NMI_GLB_RESET_0, reg);
		ret += nm_read_reg_with_ret(NMI_GLB_RESET_0, &reg);
	}
#if 0
	reg |= (1ul << 10);
	ret += nm_write_reg(NMI_GLB_RESET_0, reg);
	ret += nm_read_reg_with_ret(NMI_GLB_RESET_0, &reg);
#endif
	nm_write_reg(BOOTROM_REG,0);
	nm_write_reg(NMI_STATE_REG,0);
	nm_write_reg(NMI_REV_REG,0);
	nm_write_reg(NMI_PIN_MUX_0, 0x11111000);
	return ret;
}

开发者ID:Meronw，项目名称:shipiot-samd21-winc1500，代码行数:34，代码来源:nmasic.c

示例10: m2m_wifi_start_provision_mode

sint8 m2m_wifi_start_provision_mode(tstrM2MAPConfig *pstrAPConfig, char *pcHttpServerDomainName, uint8 bEnableHttpRedirect)
{
	sint8	s8Ret = M2M_ERR_FAIL;

	if((pstrAPConfig != NULL))
	{
		tstrM2MProvisionModeConfig	strProvConfig;
		if(M2M_SUCCESS == m2m_validate_ap_parameters(pstrAPConfig))
		{
			m2m_memcpy((uint8*)&strProvConfig.strApConfig, (uint8*)pstrAPConfig, sizeof(tstrM2MAPConfig));
			if((m2m_strlen((uint8 *)pcHttpServerDomainName) <= 0) || (NULL == pcHttpServerDomainName))
			{
				M2M_ERR("INVALID DOMAIN NAME\n");
				goto ERR1;
			}
			m2m_memcpy((uint8*)strProvConfig.acHttpServerDomainName, (uint8*)pcHttpServerDomainName, 64);
			strProvConfig.u8EnableRedirect = bEnableHttpRedirect;

			/* Stop Scan if it is ongoing.
			*/
			gu8scanInProgress = 0;
			s8Ret = hif_send(M2M_REQ_GRP_WIFI, M2M_WIFI_REQ_START_PROVISION_MODE | M2M_REQ_DATA_PKT,
						(uint8*)&strProvConfig, sizeof(tstrM2MProvisionModeConfig), NULL, 0, 0);
		}
		else
		{
			/*goto ERR1;*/
		}
	}
ERR1:
	return s8Ret;
}

开发者ID:JacobV90，项目名称:Embedded_Project，代码行数:32，代码来源:m2m_wifi.c

示例11: nm_i2c_write_reg

/*
*	@fn		nm_i2c_write_reg
*	@brief	write register
*	@param [in]	u32Addr
*				Register address
*	@param [in]	u32Val
*				Value to be written to the register
*	@return	M2M_SUCCESS in case of success and M2M_ERR_BUS_FAIL in case of failure
*	@author	M. Abdelmawla
*	@date	11 July 2012
*	@version	1.0
*/
sint8 nm_i2c_write_reg(uint32 u32Addr, uint32 u32Val)
{
	tstrNmI2cDefault strI2c;
	uint8 b[16];
	sint8 s8Ret = M2M_SUCCESS;

	if(u32Addr < 0xff) { /* clockless i2c */
		b[0] = 0x19;
		b[1] = (uint8)(u32Addr);
		b[2] = (uint8)(u32Val);
		strI2c.u16Sz = 3;
	} else {
		b[0] = 0x90;
		b[1] = (uint8)(u32Addr >> 24);
		b[2] = (uint8)(u32Addr >> 16);
		b[3] = (uint8)(u32Addr >> 8);
		b[4] = (uint8)u32Addr;
		b[5] = 0x04;
		b[6] = (uint8)u32Val;
		b[7] = (uint8)(u32Val >> 8);
		b[8] = (uint8)(u32Val >> 16);
		b[9] = (uint8)(u32Val >> 24);
		strI2c.u16Sz = 10;
	}

	strI2c.pu8Buf = b;

	if(M2M_SUCCESS != nm_bus_ioctl(NM_BUS_IOCTL_W, &strI2c))
	{
		M2M_ERR("write error\n");
		s8Ret = M2M_ERR_BUS_FAIL;
	}

	return s8Ret;
}

开发者ID:runtimeinc，项目名称:mynewt_arduino_zero，代码行数:47，代码来源:nmi2c.c

示例12: cpu_start

sint8 cpu_start(void) {
	uint32 reg;
	sint8 ret;

	/**
	reset regs
	*/
	nm_write_reg(BOOTROM_REG,0);
	nm_write_reg(NMI_STATE_REG,0);
	nm_write_reg(NMI_REV_REG,0);

	/**
	Go...
	**/
	ret = nm_read_reg_with_ret(0x1118, &reg);
	if (M2M_SUCCESS != ret) {
		ret = M2M_ERR_BUS_FAIL;
		M2M_ERR("[nmi start]: fail read reg 0x1118 ...\n");
	}
	reg |= (1 << 0);
	ret = nm_write_reg(0x1118, reg);
	ret = nm_write_reg(0x150014, 0x1);
	ret += nm_read_reg_with_ret(NMI_GLB_RESET_0, &reg);
	if ((reg & (1ul << 10)) == (1ul << 10)) {
		reg &= ~(1ul << 10);
		ret += nm_write_reg(NMI_GLB_RESET_0, reg);
	}

	reg |= (1ul << 10);
	ret += nm_write_reg(NMI_GLB_RESET_0, reg);
	nm_bsp_sleep(1); /* TODO: Why bus error if this delay is not here. */
	return ret;
}

开发者ID:Meronw，项目名称:shipiot-samd21-winc1500，代码行数:33，代码来源:nmasic.c

示例13: m2m_ota_cb

/**
*	@fn			m2m_wifi_cb(uint8 u8OpCode, uint16 u16DataSize, uint32 u32Addr, uint8 grp)
*	@brief		WiFi call back function
*	@param [in]	u8OpCode
*					HIF Opcode type.
*	@param [in]	u16DataSize
*					HIF data length.
*	@param [in]	u32Addr
*					HIF address.
*	@param [in]	grp
*					HIF group type.
*	@author
*	@date
*	@version	1.0
*/
static void m2m_ota_cb(uint8 u8OpCode, uint16 u16DataSize, uint32 u32Addr)
{
	sint8 ret = M2M_SUCCESS;
	if(u8OpCode == M2M_OTA_RESP_NOTIF_UPDATE_INFO)
	{
		tstrOtaUpdateInfo strOtaUpdateInfo;
		m2m_memset((uint8*)&strOtaUpdateInfo,0,sizeof(tstrOtaUpdateInfo));
		ret = hif_receive(u32Addr,(uint8*)&strOtaUpdateInfo,sizeof(tstrOtaUpdateInfo),0);
		if(ret == M2M_SUCCESS)
		{
			if(gpfOtaNotifCb)
				gpfOtaNotifCb(&strOtaUpdateInfo);
		}
	}
	else if (u8OpCode == M2M_OTA_RESP_UPDATE_STATUS)
	{
		tstrOtaUpdateStatusResp strOtaUpdateStatusResp;
		m2m_memset((uint8*)&strOtaUpdateStatusResp,0,sizeof(tstrOtaUpdateStatusResp));
		ret = hif_receive(u32Addr, (uint8*) &strOtaUpdateStatusResp,sizeof(tstrOtaUpdateStatusResp), 0);
		if(ret == M2M_SUCCESS)
		{
			if(gpfOtaUpdateCb)
				gpfOtaUpdateCb(strOtaUpdateStatusResp.u8OtaUpdateStatusType,strOtaUpdateStatusResp.u8OtaUpdateStatus);
		}
	}
	else
	{
		M2M_ERR("Invaild OTA resp %d ?\n",u8OpCode);
	}

}

开发者ID:zhengwang721，项目名称:ASF，代码行数:46，代码来源:m2m_ota.c

示例14: m2m_ota_init

/*!
@fn	\
	NMI_API sint8  m2m_ota_init(tpfOtaUpdateCb pfOtaUpdateCb, tpfOtaNotifCb pfOtaNotifCb);

@brief
	Initialize the OTA layer.

@param [in]	pfOtaUpdateCb
				OTA Update callback function

@param [in]	pfOtaNotifCb
				OTA notify callback function

@return
	The function SHALL return 0 for success and a negative value otherwise.
*/
NMI_API sint8  m2m_ota_init(tpfOtaUpdateCb pfOtaUpdateCb, tpfOtaNotifCb pfOtaNotifCb)
{
	sint8 ret = M2M_SUCCESS;

	if(pfOtaUpdateCb){
		gpfOtaUpdateCb = pfOtaUpdateCb;
	}else{
		M2M_ERR("Invaild Ota update cb\n");
	}
	if(pfOtaNotifCb){
		gpfOtaNotifCb = pfOtaNotifCb;
	}else{
		M2M_ERR("Invaild Ota notify cb\n");
	}

	hif_register_cb(M2M_REQ_GROUP_OTA,m2m_ota_cb);

	return ret;
}

开发者ID:zhengwang721，项目名称:ASF，代码行数:35，代码来源:m2m_ota.c

示例15: m2m_wifi_set_scan_list

sint8 m2m_wifi_set_scan_list(tstrM2MScanList* pstrScanList)
{
	sint8	s8Ret = M2M_ERR_FAIL;
	s8Ret = hif_send(M2M_REQ_GRP_WIFI, M2M_WIFI_REQ_SET_SCAN_LIST, (uint8*)pstrScanList, sizeof(tstrM2MScanList),NULL, 0,0);
	if(s8Ret != M2M_SUCCESS)
	{
		M2M_ERR("SCAN List Ret = %d\n",s8Ret);
	}
	return s8Ret;
}

开发者ID:zhengwang721，项目名称:ASF，代码行数:10，代码来源:m2m_wifi.c

示例16: chip_deinit

sint8 chip_deinit(void)
{
	uint32 reg = 0;
	sint8 ret;
	uint8 timeout = 10;

	/**
	stop the firmware, need a re-download
	**/
	ret = nm_read_reg_with_ret(NMI_GLB_RESET_0, &reg);
	if (ret != M2M_SUCCESS) {
		M2M_ERR("failed to de-initialize\n");
	}
	reg &= ~(1 << 10);
	ret = nm_write_reg(NMI_GLB_RESET_0, reg);

	if (ret != M2M_SUCCESS) {
		M2M_ERR("Error while writing reg\n");
		return ret;
	}

	do {
		ret = nm_read_reg_with_ret(NMI_GLB_RESET_0, &reg);
		if (ret != M2M_SUCCESS) {
			M2M_ERR("Error while reading reg\n");
			return ret;
		}
		/*Workaround to ensure that the chip is actually reset*/
		if ((reg & (1 << 10))) {
			M2M_DBG("Bit 10 not reset retry %d\n", timeout);
			reg &= ~(1 << 10);
			ret = nm_write_reg(NMI_GLB_RESET_0, reg);
			timeout--;
		} else {
			break;
		}

	} while (timeout);

	return ret;
}

开发者ID:Meronw，项目名称:shipiot-samd21-winc1500，代码行数:41，代码来源:nmasic.c

示例17: m2m_wifi_req_server_init

sint8 m2m_wifi_req_server_init(uint8 ch)
{
	sint8 ret = M2M_SUCCESS;
#ifdef _PS_SERVER_
	tstrM2mServerInit strServer;
	strServer.u8Channel = ch;
	ret = hif_send(M2M_REQ_GRP_WIFI,M2M_WIFI_REQ_SERVER_INIT, (uint8*)&strServer, sizeof(tstrM2mServerInit), NULL, 0, 0);
#else
	M2M_ERR("_PS_SERVER_ is not defined\n");
#endif
	return ret;
}

开发者ID:InSoonPark，项目名称:asf，代码行数:12，代码来源:m2m_wifi.c

示例18: m2m_wifi_req_client_ctrl

sint8 m2m_wifi_req_client_ctrl(uint8 u8Cmd)
{

	sint8 ret = M2M_SUCCESS;
#ifdef _PS_SERVER_
	tstrM2Mservercmd	strCmd;
	strCmd.u8cmd = u8Cmd;
	ret = hif_send(M2M_REQ_GRP_WIFI, M2M_WIFI_REQ_CLIENT_CTRL, (uint8*)&strCmd, sizeof(tstrM2Mservercmd), NULL, 0, 0);
#else
	M2M_ERR("_PS_SERVER_ is not defined\n");
#endif
	return ret;
}

开发者ID:InSoonPark，项目名称:asf，代码行数:13，代码来源:m2m_wifi.c

示例19: pullup_ctrl

sint8 pullup_ctrl(uint32 pinmask, uint8 enable)
{
	sint8 s8Ret;
	uint32 val32;
	s8Ret = nm_read_reg_with_ret(0x142c, &val32);
	if(s8Ret != M2M_SUCCESS) {
		M2M_ERR("[pullup_ctrl]: failed to read\n");
		goto _EXIT;
	}
	if(enable) {
		val32 &= ~pinmask;
		} else {
		val32 |= pinmask;
	}
	s8Ret = nm_write_reg(0x142c, val32);
	if(s8Ret  != M2M_SUCCESS) {
		M2M_ERR("[pullup_ctrl]: failed to write\n");
		goto _EXIT;
	}
_EXIT:
	return s8Ret;
}

开发者ID:Meronw，项目名称:shipiot-samd21-winc1500，代码行数:22，代码来源:nmasic.c

示例20: nm_bus_init

/*
 *	@fn		nm_bus_init
 *	@brief	Initialize the bus wrapper
 *	@return	M2M_SUCCESS in case of success and M2M_ERR_BUS_FAIL in case of failure
 */
sint8 nm_bus_init(void *pvinit)
{
	sint8 result = M2M_SUCCESS;
#ifdef CONF_WINC_USE_I2C
	twihs_options_t opt;

	/* Enable the peripheral clock for TWI */
	pmc_enable_periph_clk(CONF_WINC_I2C_ID);

	/* Configure the options of TWI driver */
	opt.master_clk = sysclk_get_peripheral_hz();
	opt.speed      = CONF_WINC_TWIHS_CLOCK;

	if (twihs_master_init(CONF_WINC_I2C, &opt) != TWIHS_SUCCESS) {
		M2M_ERR("-E-\tTWI master initialization failed.\r");
		while (1) {
			/* Capture error */
		}
	}

#elif CONF_WINC_USE_SPI
	/* Configure SPI pins. */
	ioport_set_pin_mode(CONF_WINC_SPI_MISO_GPIO, CONF_WINC_SPI_MISO_FLAGS);
	ioport_set_pin_mode(CONF_WINC_SPI_MOSI_GPIO, CONF_WINC_SPI_MOSI_FLAGS);
	ioport_set_pin_mode(CONF_WINC_SPI_CLK_GPIO, CONF_WINC_SPI_CLK_FLAGS);
	ioport_set_pin_mode(CONF_WINC_SPI_CS_GPIO, CONF_WINC_SPI_CS_FLAGS);
	ioport_disable_pin(CONF_WINC_SPI_MISO_GPIO);
	ioport_disable_pin(CONF_WINC_SPI_MOSI_GPIO);
	ioport_disable_pin(CONF_WINC_SPI_CLK_GPIO);
	ioport_disable_pin(CONF_WINC_SPI_CS_GPIO);

	spi_enable_clock(CONF_WINC_SPI);
	spi_disable(CONF_WINC_SPI);
	spi_reset(CONF_WINC_SPI);
	spi_set_master_mode(CONF_WINC_SPI);
	spi_disable_mode_fault_detect(CONF_WINC_SPI);
	spi_set_peripheral_chip_select_value(CONF_WINC_SPI, CONF_WINC_SPI_NPCS);
	spi_set_clock_polarity(CONF_WINC_SPI,
			CONF_WINC_SPI_NPCS, CONF_WINC_SPI_POL);
	spi_set_clock_phase(CONF_WINC_SPI, CONF_WINC_SPI_NPCS, CONF_WINC_SPI_PHA);
	spi_set_bits_per_transfer(CONF_WINC_SPI, CONF_WINC_SPI_NPCS, SPI_CSR_BITS_8_BIT);
	spi_set_baudrate_div(CONF_WINC_SPI, CONF_WINC_SPI_NPCS,
			(sysclk_get_cpu_hz() / CONF_WINC_SPI_CLOCK));
	spi_set_transfer_delay(CONF_WINC_SPI, CONF_WINC_SPI_NPCS, CONF_WINC_SPI_DLYBS,
			CONF_WINC_SPI_DLYBCT);
	spi_enable(CONF_WINC_SPI);

	nm_bsp_reset();
#endif
	return result;
}

开发者ID:malachi-iot，项目名称:asf，代码行数:56，代码来源:nm_bus_wrapper_same70.c

注：本文中的M2M_ERR函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ MAC16_16函数代码示例发布时间：2022-05-30

C++ M函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18225|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9662|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8174|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8544|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8451|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9376|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8421|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8406|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7393|2022-11-06

客服电话

电子邮件

C++ M2M_ERR函数代码示例

示例1: m2m_wifi_request_scan_ssid

示例2: m2m_validate_scan_options

示例3: nm_drv_deinit

示例4: m2m_wifi_request_scan

示例5: sslSetSockOpt

示例6: nm_uart_reconfigure

示例7: m2m_ota_test

示例8: nm_i2c_write_block

示例9: chip_reset_and_cpu_halt

示例10: m2m_wifi_start_provision_mode

示例11: nm_i2c_write_reg

示例12: cpu_start

示例13: m2m_ota_cb

示例14: m2m_ota_init

示例15: m2m_wifi_set_scan_list

示例16: chip_deinit

示例17: m2m_wifi_req_server_init

示例18: m2m_wifi_req_client_ctrl

示例19: pullup_ctrl

示例20: nm_bus_init

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34989

kyamagu/matlab-json: Use official API: h

四维彩超怎么看性别？四维看男孩女孩诀窍

mathjax/MathJax-i18n: MathJax localizati

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053