本文整理汇总了C++中NG_MKMESSAGE函数的典型用法代码示例。如果您正苦于以下问题：C++ NG_MKMESSAGE函数的具体用法？C++ NG_MKMESSAGE怎么用？C++ NG_MKMESSAGE使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了NG_MKMESSAGE函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ng_hci_lp_enc_change
int
ng_hci_lp_enc_change(ng_hci_unit_con_p con, int status)
{
ng_hci_unit_p unit = con->unit;
struct ng_mesg *msg = NULL;
ng_hci_lp_enc_change_ep *ep = NULL;
int error;
if (con->link_type != NG_HCI_LINK_SCO) {
if (unit->acl != NULL && NG_HOOK_IS_VALID(unit->acl)) {
NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_ENC_CHG,
sizeof(*ep), M_NOWAIT);
if (msg != NULL) {
ep = (ng_hci_lp_enc_change_ep *) msg->data;
ep->status = status;
ep->link_type = con->link_type;
ep->con_handle = con->con_handle;
NG_SEND_MSG_HOOK(error, unit->node, msg,
unit->acl, 0);
}
} else
NG_HCI_INFO(
"%s: %s - ACL hook not valid, hook=%p\n",
__func__, NG_NODE_NAME(unit->node), unit->acl);
}
return (0);
} /* ng_hci_lp_con_cfm */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:30，代码来源:ng_hci_ulpi.c
示例2: ng_l2cap_lp_qos_req
int
ng_l2cap_lp_qos_req(ng_l2cap_p l2cap, u_int16_t con_handle,
ng_l2cap_flow_p flow)
{
struct ng_mesg *msg = NULL;
ng_hci_lp_qos_req_ep *ep = NULL;
ng_l2cap_con_p con = NULL;
int error = 0;
/* Verify that we have this connection */
con = ng_l2cap_con_by_handle(l2cap, con_handle);
if (con == NULL) {
NG_L2CAP_ERR(
"%s: %s - unexpected LP_QoSSetupReq event. " \
"Connection does not exist, con_handle=%d\n",
__func__, NG_NODE_NAME(l2cap->node), con_handle);
return (ENOENT);
}
/* Verify connection state */
if (con->state != NG_L2CAP_CON_OPEN) {
NG_L2CAP_ERR(
"%s: %s - unexpected LP_QoSSetupReq event. " \
"Invalid connection state, state=%d, con_handle=%d\n",
__func__, NG_NODE_NAME(l2cap->node), con->state,
con->con_handle);
return (EINVAL);
}
/* Check if lower layer protocol is still connected */
if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid",
__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);
return (ENOTCONN);
}
/* Create and send LP_QoSSetupReq event */
NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_QOS_REQ,
sizeof(*ep), M_NOWAIT);
if (msg == NULL)
return (ENOMEM);
ep = (ng_hci_lp_qos_req_ep *) (msg->data);
ep->con_handle = con_handle;
ep->flags = flow->flags;
ep->service_type = flow->service_type;
ep->token_rate = flow->token_rate;
ep->peak_bandwidth = flow->peak_bandwidth;
ep->latency = flow->latency;
ep->delay_variation = flow->delay_variation;
NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->hci, 0);
return (error);
} /* ng_l2cap_lp_con_req */
开发者ID:AhmadTux，项目名称:freebsd，代码行数:59，代码来源:ng_l2cap_llpi.c
示例3: ng_l2cap_lp_con_req
int
ng_l2cap_lp_con_req(ng_l2cap_p l2cap, bdaddr_p bdaddr)
{
struct ng_mesg *msg = NULL;
ng_hci_lp_con_req_ep *ep = NULL;
ng_l2cap_con_p con = NULL;
int error = 0;
/* Verify that we DO NOT have connection to the remote unit */
con = ng_l2cap_con_by_addr(l2cap, bdaddr);
if (con != NULL) {
NG_L2CAP_ALERT(
"%s: %s - unexpected LP_ConnectReq event. " \
"Connection already exists, state=%d, con_handle=%d\n",
__func__, NG_NODE_NAME(l2cap->node), con->state,
con->con_handle);
return (EEXIST);
}
/* Check if lower layer protocol is still connected */
if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid\n",
__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);
return (ENOTCONN);
}
/* Create and intialize new connection descriptor */
con = ng_l2cap_new_con(l2cap, bdaddr);
if (con == NULL)
return (ENOMEM);
/* Create and send LP_ConnectReq event */
NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_REQ,
sizeof(*ep), M_NOWAIT);
if (msg == NULL) {
ng_l2cap_free_con(con);
return (ENOMEM);
}
ep = (ng_hci_lp_con_req_ep *) (msg->data);
bcopy(bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));
ep->link_type = NG_HCI_LINK_ACL;
con->state = NG_L2CAP_W4_LP_CON_CFM;
ng_l2cap_lp_timeout(con);
NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->hci, NULL);
if (error != 0)
ng_l2cap_free_con(con); /* will remove timeout */
return (error);
} /* ng_l2cap_lp_con_req */
开发者ID:MarginC，项目名称:kame，代码行数:56，代码来源:ng_l2cap_llpi.c
示例4: ng_l2cap_l2ca_con_rsp
int
ng_l2cap_l2ca_con_rsp(ng_l2cap_chan_p ch, u_int32_t token, u_int16_t result,
u_int16_t status)
{
ng_l2cap_p l2cap = ch->con->l2cap;
struct ng_mesg *msg = NULL;
ng_l2cap_l2ca_con_op *op = NULL;
int error = 0;
/* Check if upstream hook is connected and valid */
if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_Connect response message. " \
"Hook is not connected or valid, psm=%d\n",
__func__, NG_NODE_NAME(l2cap->node), ch->psm);
return (ENOTCONN);
}
/* Create and send L2CA_Connect response message */
NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_CON,
sizeof(*op), M_NOWAIT);
if (msg == NULL)
error = ENOMEM;
else {
msg->header.token = token;
msg->header.flags |= NGF_RESP;
op = (ng_l2cap_l2ca_con_op *)(msg->data);
/*
* XXX Spec. says we should only populate LCID when result == 0
* What about PENDING? What the heck, for now always populate
* LCID :)
*/
if(ch->scid == NG_L2CAP_ATT_CID){
op->idtype = NG_L2CAP_L2CA_IDTYPE_ATT;
op->lcid = ch->con->con_handle;
}else if(ch->scid == NG_L2CAP_SMP_CID){
op->idtype = NG_L2CAP_L2CA_IDTYPE_SMP;
op->lcid = ch->con->con_handle;
}else{
op->idtype = (ch->con->linktype == NG_HCI_LINK_ACL)?
NG_L2CAP_L2CA_IDTYPE_BREDR :
NG_L2CAP_L2CA_IDTYPE_LE;
op->lcid = ch->scid;
}
op->encryption = ch->con->encryption;
op->result = result;
op->status = status;
NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
}
return (error);
} /* ng_l2cap_l2ca_con_rsp */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:56，代码来源:ng_l2cap_ulpi.c
示例5: ng_l2cap_l2ca_write_rsp
int
ng_l2cap_l2ca_write_rsp(ng_l2cap_chan_p ch, u_int32_t token, u_int16_t result,
u_int16_t length)
{
ng_l2cap_p l2cap = ch->con->l2cap;
struct ng_mesg *msg = NULL;
ng_l2cap_l2ca_write_op *op = NULL;
int error = 0;
/* Check if upstream hook is connected and valid */
if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_WriteRsp message. " \
"Hook is not connected or valid, psm=%d\n",
__func__, NG_NODE_NAME(l2cap->node), ch->psm);
return (ENOTCONN);
}
/* Create and send L2CA_WriteRsp message */
NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_WRITE,
sizeof(*op), M_NOWAIT);
if (msg == NULL)
error = ENOMEM;
else {
msg->header.token = token;
msg->header.flags |= NGF_RESP;
op = (ng_l2cap_l2ca_write_op *)(msg->data);
op->result = result;
op->length = length;
if(ch->scid == NG_L2CAP_ATT_CID){
op->idtype = NG_L2CAP_L2CA_IDTYPE_ATT;
op->lcid = ch->con->con_handle;
}else if(ch->scid == NG_L2CAP_SMP_CID){
op->idtype = NG_L2CAP_L2CA_IDTYPE_SMP;
op->lcid = ch->con->con_handle;
}else{
op->idtype = (ch->con->linktype == NG_HCI_LINK_ACL)?
NG_L2CAP_L2CA_IDTYPE_BREDR :
NG_L2CAP_L2CA_IDTYPE_LE;
op->lcid = ch->scid;
}
NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
}
return (error);
} /* ng_l2cap_l2ca_write_rsp */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:49，代码来源:ng_l2cap_ulpi.c
示例6: ng_hci_node_is_up
void
ng_hci_node_is_up(node_p node, hook_p hook, void *arg1, int arg2)
{
ng_hci_unit_p unit = NULL;
struct ng_mesg *msg = NULL;
ng_hci_node_up_ep *ep = NULL;
int error;
if (node == NULL || NG_NODE_NOT_VALID(node) ||
hook == NULL || NG_HOOK_NOT_VALID(hook))
return;
unit = (ng_hci_unit_p) NG_NODE_PRIVATE(node);
if ((unit->state & NG_HCI_UNIT_READY) != NG_HCI_UNIT_READY)
return;
if (hook != unit->acl && hook != unit->sco)
return;
NG_MKMESSAGE(msg,NGM_HCI_COOKIE,NGM_HCI_NODE_UP,sizeof(*ep),M_NOWAIT);
if (msg != NULL) {
ep = (ng_hci_node_up_ep *)(msg->data);
if (hook == unit->acl) {
NG_HCI_BUFF_ACL_SIZE(unit->buffer, ep->pkt_size);
NG_HCI_BUFF_ACL_TOTAL(unit->buffer, ep->num_pkts);
} else {
NG_HCI_BUFF_SCO_SIZE(unit->buffer, ep->pkt_size);
NG_HCI_BUFF_SCO_TOTAL(unit->buffer, ep->num_pkts);
}
bcopy(&unit->bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));
NG_SEND_MSG_HOOK(error, node, msg, hook, 0);
} else
error = ENOMEM;
if (error != 0)
NG_HCI_INFO(
"%s: %s - failed to send NODE_UP message to hook \"%s\", error=%d\n",
__func__, NG_NODE_NAME(unit->node),
NG_HOOK_NAME(hook), error);
} /* ng_hci_node_is_up */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:43，代码来源:ng_hci_misc.c
示例7: ng_hci_lp_con_ind
int
ng_hci_lp_con_ind(ng_hci_unit_con_p con, u_int8_t *uclass)
{
ng_hci_unit_p unit = con->unit;
struct ng_mesg *msg = NULL;
ng_hci_lp_con_ind_ep *ep = NULL;
hook_p hook = NULL;
int error = 0;
/*
* Connection_Request event is generated for specific link type.
* Use link_type to select upstream hook.
*/
if (con->link_type == NG_HCI_LINK_ACL)
hook = unit->acl;
else
hook = unit->sco;
if (hook != NULL && NG_HOOK_IS_VALID(hook)) {
NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_IND,
sizeof(*ep), M_NOWAIT);
if (msg == NULL)
return (ENOMEM);
ep = (ng_hci_lp_con_ind_ep *)(msg->data);
ep->link_type = con->link_type;
bcopy(uclass, ep->uclass, sizeof(ep->uclass));
bcopy(&con->bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));
NG_SEND_MSG_HOOK(error, unit->node, msg, hook, 0);
} else {
NG_HCI_WARN(
"%s: %s - Upstream hook is not connected or not valid, hook=%p\n",
__func__, NG_NODE_NAME(unit->node), hook);
error = ENOTCONN;
}
return (error);
} /* ng_hci_lp_con_ind */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:41，代码来源:ng_hci_ulpi.c
示例8: ng_l2cap_l2ca_discon_ind
int
ng_l2cap_l2ca_discon_ind(ng_l2cap_chan_p ch)
{
ng_l2cap_p l2cap = ch->con->l2cap;
struct ng_mesg *msg = NULL;
ng_l2cap_l2ca_discon_ind_ip *ip = NULL;
int error = 0;
/* Check if upstream hook is connected and valid */
if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_DisconnectInd message. " \
"Hook is not connected or valid, psm=%d\n",
__func__, NG_NODE_NAME(l2cap->node), ch->psm);
return (ENOTCONN);
}
/* Create and send L2CA_DisconnectInd message */
NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_DISCON_IND,
sizeof(*ip), M_NOWAIT);
if (msg == NULL)
error = ENOMEM;
else {
ip = (ng_l2cap_l2ca_discon_ind_ip *)(msg->data);
ip->idtype = ch->idtype;
if(ch->idtype == NG_L2CAP_L2CA_IDTYPE_ATT||
ch->idtype == NG_L2CAP_L2CA_IDTYPE_SMP)
ip->lcid = ch->con->con_handle;
else
ip->lcid = ch->scid;
NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
}
return (error);
} /* ng_l2cap_l2ca_discon_ind */
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:37，代码来源:ng_l2cap_ulpi.c
示例9: ng_hci_lp_le_con_req
static int
ng_hci_lp_le_con_req(ng_hci_unit_p unit, item_p item, hook_p hook, int link_type)
{
struct acl_con_req {
ng_hci_cmd_pkt_t hdr;
ng_hci_le_create_connection_cp cp;
} __attribute__ ((packed)) *req = NULL;
ng_hci_lp_con_req_ep *ep = NULL;
ng_hci_unit_con_p con = NULL;
struct mbuf *m = NULL;
int error = 0;
ep = (ng_hci_lp_con_req_ep *)(NGI_MSG(item)->data);
if((link_type != NG_HCI_LINK_LE_PUBLIC)&&
(link_type != NG_HCI_LINK_LE_RANDOM)){
printf("%s: Link type %d Cannot be here \n", __func__,
link_type);
}
/*
* Only one ACL connection can exist between each pair of units.
* So try to find ACL connection descriptor (in any state) that
* has requested remote BD_ADDR.
*
* Two cases:
*
* 1) We do not have connection to the remote unit. This is simple.
* Just create new connection descriptor and send HCI command to
* create new connection.
*
* 2) We do have connection descriptor. We need to check connection
* state:
*
* 2.1) NG_HCI_CON_W4_LP_CON_RSP means that we are in the middle of
* accepting connection from the remote unit. This is a race
* condition. We will ignore this message.
*
* 2.2) NG_HCI_CON_W4_CONN_COMPLETE means that upper layer already
* requested connection or we just accepted it. In any case
* all we need to do here is set appropriate notification bit
* and wait.
*
* 2.3) NG_HCI_CON_OPEN means connection is open. Just reply back
* and let upper layer know that we have connection already.
*/
con = ng_hci_con_by_bdaddr(unit, &ep->bdaddr, link_type);
if (con != NULL) {
switch (con->state) {
case NG_HCI_CON_W4_LP_CON_RSP: /* XXX */
error = EALREADY;
break;
case NG_HCI_CON_W4_CONN_COMPLETE:
if (hook != unit->sco)
con->flags |= NG_HCI_CON_NOTIFY_ACL;
else
con->flags |= NG_HCI_CON_NOTIFY_SCO;
break;
case NG_HCI_CON_OPEN: {
struct ng_mesg *msg = NULL;
ng_hci_lp_con_cfm_ep *cfm = NULL;
if (hook != NULL && NG_HOOK_IS_VALID(hook)) {
NGI_GET_MSG(item, msg);
NG_FREE_MSG(msg);
NG_MKMESSAGE(msg, NGM_HCI_COOKIE,
NGM_HCI_LP_CON_CFM, sizeof(*cfm),
M_NOWAIT);
if (msg != NULL) {
cfm = (ng_hci_lp_con_cfm_ep *)msg->data;
cfm->status = 0;
cfm->link_type = con->link_type;
cfm->con_handle = con->con_handle;
bcopy(&con->bdaddr, &cfm->bdaddr,
sizeof(cfm->bdaddr));
/*
* This will forward item back to
* sender and set item to NULL
*/
_NGI_MSG(item) = msg;
NG_FWD_ITEM_HOOK(error, item, hook);
} else
error = ENOMEM;
} else
NG_HCI_INFO(
"%s: %s - Source hook is not valid, hook=%p\n",
__func__, NG_NODE_NAME(unit->node),
hook);
} break;
default:
panic(
"%s: %s - Invalid connection state=%d\n",
__func__, NG_NODE_NAME(unit->node), con->state);
break;
}
//.........这里部分代码省略.........
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:101，代码来源:ng_hci_ulpi.c
示例10: ng_hci_lp_con_cfm
int
ng_hci_lp_con_cfm(ng_hci_unit_con_p con, int status)
{
ng_hci_unit_p unit = con->unit;
struct ng_mesg *msg = NULL;
ng_hci_lp_con_cfm_ep *ep = NULL;
int error;
/*
* Check who wants to be notified. For ACL links both ACL and SCO
* upstream hooks will be notified (if required). For SCO links
* only SCO upstream hook will receive notification
*/
if (con->link_type == NG_HCI_LINK_ACL &&
con->flags & NG_HCI_CON_NOTIFY_ACL) {
if (unit->acl != NULL && NG_HOOK_IS_VALID(unit->acl)) {
NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_CFM,
sizeof(*ep), M_NOWAIT);
if (msg != NULL) {
ep = (ng_hci_lp_con_cfm_ep *) msg->data;
ep->status = status;
ep->link_type = con->link_type;
ep->con_handle = con->con_handle;
bcopy(&con->bdaddr, &ep->bdaddr,
sizeof(ep->bdaddr));
NG_SEND_MSG_HOOK(error, unit->node, msg,
unit->acl, 0);
}
} else
NG_HCI_INFO(
"%s: %s - ACL hook not valid, hook=%p\n",
__func__, NG_NODE_NAME(unit->node), unit->acl);
con->flags &= ~NG_HCI_CON_NOTIFY_ACL;
}
if (con->flags & NG_HCI_CON_NOTIFY_SCO) {
if (unit->sco != NULL && NG_HOOK_IS_VALID(unit->sco)) {
NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_CFM,
sizeof(*ep), M_NOWAIT);
if (msg != NULL) {
ep = (ng_hci_lp_con_cfm_ep *) msg->data;
ep->status = status;
ep->link_type = con->link_type;
ep->con_handle = con->con_handle;
bcopy(&con->bdaddr, &ep->bdaddr,
sizeof(ep->bdaddr));
NG_SEND_MSG_HOOK(error, unit->node, msg,
unit->sco, 0);
}
} else
NG_HCI_INFO(
"%s: %s - SCO hook not valid, hook=%p\n",
__func__, NG_NODE_NAME(unit->node), unit->acl);
con->flags &= ~NG_HCI_CON_NOTIFY_SCO;
}
return (0);
} /* ng_hci_lp_con_cfm */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:63，代码来源:ng_hci_ulpi.c
示例11: ng_hci_lp_acl_con_req
static int
ng_hci_lp_acl_con_req(ng_hci_unit_p unit, item_p item, hook_p hook)
{
struct acl_con_req {
ng_hci_cmd_pkt_t hdr;
ng_hci_create_con_cp cp;
} __attribute__ ((packed)) *req = NULL;
ng_hci_lp_con_req_ep *ep = NULL;
ng_hci_unit_con_p con = NULL;
ng_hci_neighbor_t *n = NULL;
struct mbuf *m = NULL;
int error = 0;
ep = (ng_hci_lp_con_req_ep *)(NGI_MSG(item)->data);
/*
* Only one ACL connection can exist between each pair of units.
* So try to find ACL connection descriptor (in any state) that
* has requested remote BD_ADDR.
*
* Two cases:
*
* 1) We do not have connection to the remote unit. This is simple.
* Just create new connection descriptor and send HCI command to
* create new connection.
*
* 2) We do have connection descriptor. We need to check connection
* state:
*
* 2.1) NG_HCI_CON_W4_LP_CON_RSP means that we are in the middle of
* accepting connection from the remote unit. This is a race
* condition. We will ignore this message.
*
* 2.2) NG_HCI_CON_W4_CONN_COMPLETE means that upper layer already
* requested connection or we just accepted it. In any case
* all we need to do here is set appropriate notification bit
* and wait.
*
* 2.3) NG_HCI_CON_OPEN means connection is open. Just reply back
* and let upper layer know that we have connection already.
*/
con = ng_hci_con_by_bdaddr(unit, &ep->bdaddr, NG_HCI_LINK_ACL);
if (con != NULL) {
switch (con->state) {
case NG_HCI_CON_W4_LP_CON_RSP: /* XXX */
error = EALREADY;
break;
case NG_HCI_CON_W4_CONN_COMPLETE:
if (hook == unit->acl)
con->flags |= NG_HCI_CON_NOTIFY_ACL;
else
con->flags |= NG_HCI_CON_NOTIFY_SCO;
break;
case NG_HCI_CON_OPEN: {
struct ng_mesg *msg = NULL;
ng_hci_lp_con_cfm_ep *cfm = NULL;
if (hook != NULL && NG_HOOK_IS_VALID(hook)) {
NGI_GET_MSG(item, msg);
NG_FREE_MSG(msg);
NG_MKMESSAGE(msg, NGM_HCI_COOKIE,
NGM_HCI_LP_CON_CFM, sizeof(*cfm),
M_NOWAIT);
if (msg != NULL) {
cfm = (ng_hci_lp_con_cfm_ep *)msg->data;
cfm->status = 0;
cfm->link_type = con->link_type;
cfm->con_handle = con->con_handle;
bcopy(&con->bdaddr, &cfm->bdaddr,
sizeof(cfm->bdaddr));
/*
* This will forward item back to
* sender and set item to NULL
*/
_NGI_MSG(item) = msg;
NG_FWD_ITEM_HOOK(error, item, hook);
} else
error = ENOMEM;
} else
NG_HCI_INFO(
"%s: %s - Source hook is not valid, hook=%p\n",
__func__, NG_NODE_NAME(unit->node),
hook);
} break;
default:
panic(
"%s: %s - Invalid connection state=%d\n",
__func__, NG_NODE_NAME(unit->node), con->state);
break;
}
goto out;
}
//.........这里部分代码省略.........
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:101，代码来源:ng_hci_ulpi.c
示例12: vboxNetFltPortOsSetActive
void vboxNetFltPortOsSetActive(PVBOXNETFLTINS pThis, bool fActive)
{
struct ifnet *ifp;
struct ifreq ifreq;
int error;
node_p node;
struct ng_mesg *msg;
struct ngm_connect *con;
struct ngm_rmhook *rm;
char path[NG_PATHSIZ];
Log(("%s: fActive:%d\n", __func__, fActive));
ifp = ASMAtomicUoReadPtrT(&pThis->u.s.ifp, struct ifnet *);
VBOXCURVNET_SET(ifp->if_vnet);
node = ASMAtomicUoReadPtrT(&pThis->u.s.node, node_p);
memset(&ifreq, 0, sizeof(struct ifreq));
/* Activate interface */
if (fActive)
{
pThis->u.s.flags = ifp->if_flags;
ifpromisc(ifp, 1);
/* ng_ether nodes are named after the interface name */
snprintf(path, sizeof(path), "%s:", ifp->if_xname);
/*
* Send a netgraph connect message to the ng_ether node
* assigned to the bridged interface. Connecting
* the hooks 'lower' (ng_ether) to out 'input'.
*/
NG_MKMESSAGE(msg, NGM_GENERIC_COOKIE, NGM_CONNECT,
sizeof(struct ngm_connect), M_NOWAIT);
if (msg == NULL)
return;
con = (struct ngm_connect *)msg->data;
snprintf(con->path, NG_PATHSIZ, "vboxnetflt_%s:", ifp->if_xname);
strlcpy(con->ourhook, "lower", NG_HOOKSIZ);
strlcpy(con->peerhook, "input", NG_HOOKSIZ);
NG_SEND_MSG_PATH(error, node, msg, path, 0);
/*
* Do the same for the hooks 'upper' (ng_ether) and our
* 'output' hook.
*/
NG_MKMESSAGE(msg, NGM_GENERIC_COOKIE, NGM_CONNECT,
sizeof(struct ngm_connect), M_NOWAIT);
if (msg == NULL)
return;
con = (struct ngm_connect *)msg->data;
snprintf(con->path, NG_PATHSIZ, "vboxnetflt_%s:",
ifp->if_xname);
strlcpy(con->ourhook, "upper", sizeof(con->ourhook));
strlcpy(con->peerhook, "output", sizeof(con->peerhook));
NG_SEND_MSG_PATH(error, node, msg, path, 0);
}
else
{
/* De-activate interface */
pThis->u.s.flags = 0;
ifpromisc(ifp, 0);
/* Disconnect msgs are addressed to ourself */
snprintf(path, sizeof(path), "vboxnetflt_%s:", ifp->if_xname);
/*
* Send a netgraph message to disconnect our 'input' hook
*/
NG_MKMESSAGE(msg, NGM_GENERIC_COOKIE, NGM_RMHOOK,
sizeof(struct ngm_rmhook), M_NOWAIT);
if (msg == NULL)
return;
rm = (struct ngm_rmhook *)msg->data;
strlcpy(rm->ourhook, "input", NG_HOOKSIZ);
NG_SEND_MSG_PATH(error, node, msg, path, 0);
/*
* Send a netgraph message to disconnect our 'output' hook
*/
NG_MKMESSAGE(msg, NGM_GENERIC_COOKIE, NGM_RMHOOK,
sizeof(struct ngm_rmhook), M_NOWAIT);
if (msg == NULL)
return;
rm = (struct ngm_rmhook *)msg->data;
strlcpy(rm->ourhook, "output", NG_HOOKSIZ);
NG_SEND_MSG_PATH(error, node, msg, path, 0);
}
VBOXCURVNET_RESTORE();
}
开发者ID:LastRitter，项目名称:vbox-haiku，代码行数:90，代码来源:VBoxNetFlt-freebsd.c
示例13: ng_l2cap_lp_con_ind
int
ng_l2cap_lp_con_ind(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
ng_hci_lp_con_ind_ep *ep = NULL;
ng_hci_lp_con_rsp_ep *rp = NULL;
struct ng_mesg *rsp = NULL;
ng_l2cap_con_p con = NULL;
int error = 0;
/* Check message */
if (msg->header.arglen != sizeof(*ep)) {
NG_L2CAP_ALERT(
"%s: %s - invalid LP_ConnectInd message size\n",
__func__, NG_NODE_NAME(l2cap->node));
return (EMSGSIZE);
}
ep = (ng_hci_lp_con_ind_ep *) (msg->data);
/* Make sure we have only one connection to the remote unit */
con = ng_l2cap_con_by_addr(l2cap, &ep->bdaddr);
if (con != NULL) {
NG_L2CAP_ALERT(
"%s: %s - unexpected LP_ConnectInd event. " \
"Connection already exists, state=%d, con_handle=%d\n",
__func__, NG_NODE_NAME(l2cap->node), con->state,
con->con_handle);
return (EEXIST);
}
/* Check if lower layer protocol is still connected */
if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid",
__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);
return (ENOTCONN);
}
/* Create and intialize new connection descriptor */
con = ng_l2cap_new_con(l2cap, &ep->bdaddr);
if (con == NULL)
return (ENOMEM);
/* Create and send LP_ConnectRsp event */
NG_MKMESSAGE(rsp, NGM_HCI_COOKIE, NGM_HCI_LP_CON_RSP,
sizeof(*rp), M_NOWAIT);
if (rsp == NULL) {
ng_l2cap_free_con(con);
return (ENOMEM);
}
rp = (ng_hci_lp_con_rsp_ep *)(rsp->data);
rp->status = 0x00; /* accept connection */
rp->link_type = NG_HCI_LINK_ACL;
bcopy(&ep->bdaddr, &rp->bdaddr, sizeof(rp->bdaddr));
con->state = NG_L2CAP_W4_LP_CON_CFM;
ng_l2cap_lp_timeout(con);
NG_SEND_MSG_HOOK(error, l2cap->node, rsp, l2cap->hci, 0);
if (error != 0) {
if (ng_l2cap_lp_untimeout(con) == 0)
ng_l2cap_free_con(con);
/*
* Do not free connection if ng_l2cap_lp_untimeout() failed
* let timeout handler deal with it. Always return error to
* the caller.
*/
}
return (error);
} /* ng_l2cap_lp_con_ind */
开发者ID:AhmadTux，项目名称:freebsd，代码行数:77，代码来源:ng_l2cap_llpi.c
示例14: ng_ksocket_finish_accept
/*
* Handle the first completed incoming connection, assumed to be already
* on the socket's so_comp queue.
*/
static void
ng_ksocket_finish_accept(priv_p priv)
{
struct socket *const head = priv->so;
struct socket *so;
struct sockaddr *sa = NULL;
struct ng_mesg *resp;
struct ng_ksocket_accept *resp_data;
node_p node;
priv_p priv2;
int len;
int error;
ACCEPT_LOCK();
so = TAILQ_FIRST(&head->so_comp);
if (so == NULL) { /* Should never happen */
ACCEPT_UNLOCK();
return;
}
TAILQ_REMOVE(&head->so_comp, so, so_list);
head->so_qlen--;
so->so_qstate &= ~SQ_COMP;
so->so_head = NULL;
SOCK_LOCK(so);
soref(so);
sosetstate(so, SS_NBIO);
SOCK_UNLOCK(so);
ACCEPT_UNLOCK();
/* XXX KNOTE(&head->so_rcv.sb_sel.si_note, 0); */
soaccept(so, &sa);
len = OFFSETOF(struct ng_ksocket_accept, addr);
if (sa != NULL)
len += sa->sa_len;
NG_MKMESSAGE(resp, NGM_KSOCKET_COOKIE, NGM_KSOCKET_ACCEPT, len,
M_WAITOK | M_NULLOK);
if (resp == NULL) {
soclose(so);
goto out;
}
resp->header.flags |= NGF_RESP;
resp->header.token = priv->response_token;
/* Clone a ksocket node to wrap the new socket */
error = ng_make_node_common(&ng_ksocket_typestruct, &node);
if (error) {
kfree(resp, M_NETGRAPH);
soclose(so);
goto out;
}
if (ng_ksocket_constructor(node) != 0) {
NG_NODE_UNREF(node);
kfree(resp, M_NETGRAPH);
soclose(so);
goto out;
}
priv2 = NG_NODE_PRIVATE(node);
priv2->so = so;
priv2->flags |= KSF_CLONED | KSF_EMBRYONIC;
/*
* Insert the cloned node into a list of embryonic children
* on the parent node. When a hook is created on the cloned
* node it will be removed from this list. When the parent
* is destroyed it will destroy any embryonic children it has.
*/
LIST_INSERT_HEAD(&priv->embryos, priv2, siblings);
so->so_upcallarg = (caddr_t)node;
so->so_upcall = ng_ksocket_incoming;
SOCKBUF_LOCK(&so->so_rcv);
so->so_rcv.sb_flags |= SB_UPCALL;
SOCKBUF_UNLOCK(&so->so_rcv);
SOCKBUF_LOCK(&so->so_snd);
so->so_snd.sb_flags |= SB_UPCALL;
SOCKBUF_UNLOCK(&so->so_snd);
/* Fill in the response data and send it or return it to the caller */
resp_data = (struct ng_ksocket_accept *)resp->data;
resp_data->nodeid = NG_NODE_ID(node);
if (sa != NULL)
bcopy(sa, &resp_data->addr, sa->sa_len);
NG_SEND_MSG_ID(error, node, resp, priv->response_addr, 0);
out:
if (sa != NULL)
kfree(sa, M_SONAME);
}
开发者ID:juanfra684，项目名称:DragonFlyBSD，代码行数:97，代码来源:ng_ksocket.c
示例15: ng_ksocket_incoming2
/*
* When incoming data is appended to the socket, we get notified here.
* This is also called whenever a significant event occurs for the socket.
* Our original caller may have queued this even some time ago and
* we cannot trust that he even still exists. The node however is being
* held with a reference by the queueing code and guarantied to be valid.
*/
static void
ng_ksocket_incoming2(node_p node, hook_p hook, void *arg1, int arg2)
{
struct socket *so = arg1;
const priv_p priv = NG_NODE_PRIVATE(node);
struct mbuf *m;
struct ng_mesg *response;
struct uio auio;
int s, flags, error;
s = splnet();
/* so = priv->so; *//* XXX could have derived this like so */
KASSERT(so == priv->so, ("%s: wrong socket", __func__));
/* Allow next incoming event to be queued. */
atomic_store_rel_int(&priv->fn_sent, 0);
/* Check whether a pending connect operation has completed */
if (priv->flags & KSF_CONNECTING) {
if ((error = so->so_error) != 0) {
so->so_error = 0;
soclrstate(so, SS_ISCONNECTING);
}
if (!(so->so_state & SS_ISCONNECTING)) {
NG_MKMESSAGE(response, NGM_KSOCKET_COOKIE,
NGM_KSOCKET_CONNECT, sizeof(int32_t), M_WAITOK | M_NULLOK);
if (response != NULL) {
response->header.flags |= NGF_RESP;
response->header.token = priv->response_token;
*(int32_t *)response->data = error;
/*
* send an async "response" message
* to the node that set us up
* (if it still exists)
*/
NG_SEND_MSG_ID(error, node,
response, priv->response_addr, 0);
}
priv->flags &= ~KSF_CONNECTING;
}
}
/* Check whether a pending accept operation has completed */
if (priv->flags & KSF_ACCEPTING) {
error = ng_ksocket_check_accept(priv);
if (error != EWOULDBLOCK)
priv->flags &= ~KSF_ACCEPTING;
if (error == 0)
ng_ksocket_finish_accept(priv);
}
/*
* If we don't have a hook, we must handle data events later. When
* the hook gets created and is connected, this upcall function
* will be called again.
*/
if (priv->hook == NULL) {
splx(s);
return;
}
/* Read and forward available mbuf's */
auio.uio_td = NULL;
auio.uio_resid = 1000000000;
flags = MSG_DONTWAIT;
while (1) {
struct sockaddr *sa = NULL;
struct mbuf *n;
/* Try to get next packet from socket */
if ((error = soreceive(so, (so->so_state & SS_ISCONNECTED) ?
NULL : &sa, &auio, &m, NULL, &flags)) != 0)
break;
/* See if we got anything */
if (m == NULL) {
if (sa != NULL)
kfree(sa, M_SONAME);
break;
}
/*
* Don't trust the various socket layers to get the
* packet header and length correct (e.g. kern/15175).
*
* Also, do not trust that soreceive() will clear m_nextpkt
* for us (e.g. kern/84952, kern/82413).
*/
m->m_pkthdr.csum_flags = 0;
for (n = m, m->m_pkthdr.len = 0; n != NULL; n = n->m_next) {
m->m_pkthdr.len += n->m_len;
n->m_nextpkt = NULL;
//.........这里部分代码省略.........
开发者ID:juanfra684，项目名称:DragonFlyBSD，代码行数:101，代码来源:ng_ksocket.c
注：本文中的NG_MKMESSAGE函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论