• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ NG_NODE_NAME函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中NG_NODE_NAME函数的典型用法代码示例。如果您正苦于以下问题：C++ NG_NODE_NAME函数的具体用法？C++ NG_NODE_NAME怎么用？C++ NG_NODE_NAME使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了NG_NODE_NAME函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ng_l2cap_lp_con_cfm

int
ng_l2cap_lp_con_cfm(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
	ng_hci_lp_con_cfm_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Check message */
	if (msg->header.arglen != sizeof(*ep)) {
		NG_L2CAP_ALERT(
"%s: %s - invalid LP_ConnectCfm[Neg] message size\n",
			__func__, NG_NODE_NAME(l2cap->node));
		error = EMSGSIZE;
		goto out;
	}

	ep = (ng_hci_lp_con_cfm_ep *) (msg->data);

	/* Check if we have requested/accepted this connection */
	con = ng_l2cap_con_by_addr(l2cap, &ep->bdaddr);
	if (con == NULL) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_ConnectCfm event. Connection does not exist\n",
			__func__, NG_NODE_NAME(l2cap->node));
		error = ENOENT;
		goto out;
	}

	/* Check connection state */
	if (con->state != NG_L2CAP_W4_LP_CON_CFM) {
		NG_L2CAP_ALERT(
"%s: %s - unexpected LP_ConnectCfm event. " \
"Invalid connection state, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);
		error = EINVAL;
		goto out;
	}

	/*
	 * Looks like it is our confirmation. It is safe now to cancel 
	 * connection timer and notify upper layer. If timeout already
	 * happened then ignore connection confirmation and let timeout
	 * handle that.
 	 */

	if ((error = ng_l2cap_lp_untimeout(con)) != 0)
		goto out;

	if (ep->status == 0) {
		con->state = NG_L2CAP_CON_OPEN;
		con->con_handle = ep->con_handle;
		ng_l2cap_lp_deliver(con);
	} else /* Negative confirmation - remove connection descriptor */
		ng_l2cap_con_fail(con, ep->status);
out:
	return (error);
} /* ng_l2cap_lp_con_cfm */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:58，代码来源:ng_l2cap_llpi.c


示例2: ng_l2cap_lp_con_req

int
ng_l2cap_lp_con_req(ng_l2cap_p l2cap, bdaddr_p bdaddr)
{
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_con_req_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Verify that we DO NOT have connection to the remote unit */
	con = ng_l2cap_con_by_addr(l2cap, bdaddr);
	if (con != NULL) {
		NG_L2CAP_ALERT(
"%s: %s - unexpected LP_ConnectReq event. " \
"Connection already exists, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);

		return (EEXIST);
	}

	/* Check if lower layer protocol is still connected */
	if (l2cap->hci == NULL || NG_HOOK_NOT_VALID(l2cap->hci)) {
		NG_L2CAP_ERR(
"%s: %s - hook \"%s\" is not connected or valid\n",
			__func__, NG_NODE_NAME(l2cap->node), NG_L2CAP_HOOK_HCI);

		return (ENOTCONN);
	}

	/* Create and intialize new connection descriptor */
	con = ng_l2cap_new_con(l2cap, bdaddr);
	if (con == NULL)
		return (ENOMEM);

	/* Create and send LP_ConnectReq event */
	NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_REQ,
		sizeof(*ep), M_NOWAIT);
	if (msg == NULL) {
		ng_l2cap_free_con(con);

		return (ENOMEM);
	}

	ep = (ng_hci_lp_con_req_ep *) (msg->data);
	bcopy(bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));
	ep->link_type = NG_HCI_LINK_ACL;

	con->state = NG_L2CAP_W4_LP_CON_CFM;
	ng_l2cap_lp_timeout(con);

	NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->hci, NULL);
	if (error != 0)
		ng_l2cap_free_con(con); /* will remove timeout */
	
	return (error);
} /* ng_l2cap_lp_con_req */
开发者ID:MarginC，项目名称:kame，代码行数:56，代码来源:ng_l2cap_llpi.c


示例3: ng_l2cap_lp_discon_ind

int
ng_l2cap_lp_discon_ind(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
	ng_hci_lp_discon_ind_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Check message */
	if (msg->header.arglen != sizeof(*ep)) {
		NG_L2CAP_ALERT(
"%s: %s - invalid LP_DisconnectInd message size\n",
			__func__, NG_NODE_NAME(l2cap->node));
		error = EMSGSIZE;
		goto out;
	}

	ep = (ng_hci_lp_discon_ind_ep *) (msg->data);

	/* Check if we have this connection */
	con = ng_l2cap_con_by_handle(l2cap, ep->con_handle);
	if (con == NULL) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_DisconnectInd event. " \
"Connection does not exist, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ep->con_handle);
		error = ENOENT;
		goto out;
	}

	/* XXX Verify connection state -- do we need to check this? */
	if (con->state != NG_L2CAP_CON_OPEN) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_DisconnectInd event. " \
"Invalid connection state, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);
		error = EINVAL;
		goto out;
	}

	/*
	 * Notify upper layer and remove connection
	 * Note: The connection could have auto disconnect timeout set. Try
	 * to remove it. If auto disconnect timeout happened then ignore
	 * disconnect indication and let timeout handle that.
	 */

	if (con->flags & NG_L2CAP_CON_AUTO_DISCON_TIMO)
		if ((error = ng_l2cap_discon_untimeout(con)) != 0)
			return (error);

	ng_l2cap_con_fail(con, ep->reason);
out:
	return (error);
} /* ng_l2cap_lp_discon_ind */
开发者ID:AhmadTux，项目名称:freebsd，代码行数:55，代码来源:ng_l2cap_llpi.c


示例4: ng_hci_lp_con_req

int
ng_hci_lp_con_req(ng_hci_unit_p unit, item_p item, hook_p hook)
{
	int link_type;
	
	if ((unit->state & NG_HCI_UNIT_READY) != NG_HCI_UNIT_READY) {
		NG_HCI_WARN(
"%s: %s - unit is not ready, state=%#x\n",
			__func__, NG_NODE_NAME(unit->node), unit->state);

		NG_FREE_ITEM(item);

		return (ENXIO);
	}

	if (NGI_MSG(item)->header.arglen != sizeof(ng_hci_lp_con_req_ep)) {
		NG_HCI_ALERT(
"%s: %s - invalid LP_ConnectReq message size=%d\n",
			__func__, NG_NODE_NAME(unit->node),
			NGI_MSG(item)->header.arglen);

		NG_FREE_ITEM(item);

		return (EMSGSIZE);
	}
	link_type = ((ng_hci_lp_con_req_ep *)(NGI_MSG(item)->data))->link_type;
	switch(link_type){
	case NG_HCI_LINK_ACL:
		return (ng_hci_lp_acl_con_req(unit, item, hook));
	case NG_HCI_LINK_SCO:
		if (hook != unit->sco ) {
			NG_HCI_WARN(
				"%s: %s - LP_ConnectReq for SCO connection came from wrong hook=%p\n",
				__func__, NG_NODE_NAME(unit->node), hook);
			
			NG_FREE_ITEM(item);
			
			return (EINVAL);
		}
		
		return (ng_hci_lp_sco_con_req(unit, item, hook));
	case NG_HCI_LINK_LE_PUBLIC:
	case NG_HCI_LINK_LE_RANDOM:		
		return (ng_hci_lp_le_con_req(unit, item, hook, link_type));
	default:
		panic("%s: link_type invalid.", __func__);
	}
	
	return (EINVAL);
} /* ng_hci_lp_con_req */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:50，代码来源:ng_hci_ulpi.c


示例5: ng_hci_lp_enc_change

int
ng_hci_lp_enc_change(ng_hci_unit_con_p con, int status)
{
	ng_hci_unit_p		 unit = con->unit;
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_enc_change_ep	*ep = NULL;
	int			 error;


	if (con->link_type != NG_HCI_LINK_SCO) {
		if (unit->acl != NULL && NG_HOOK_IS_VALID(unit->acl)) {
			NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_ENC_CHG, 
				sizeof(*ep), M_NOWAIT);
			if (msg != NULL) {
				ep = (ng_hci_lp_enc_change_ep *) msg->data;
				ep->status = status;
				ep->link_type = con->link_type;
				ep->con_handle = con->con_handle;

				NG_SEND_MSG_HOOK(error, unit->node, msg,
					unit->acl, 0);
			}
		} else
			NG_HCI_INFO(
"%s: %s - ACL hook not valid, hook=%p\n",
				__func__, NG_NODE_NAME(unit->node), unit->acl);

	}
	return (0);
} /* ng_hci_lp_con_cfm */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:30，代码来源:ng_hci_ulpi.c


示例6: ng_l2cap_lp_discon_ind

int
ng_l2cap_lp_discon_ind(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
	ng_hci_lp_discon_ind_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Check message */
	if (msg->header.arglen != sizeof(*ep)) {
		NG_L2CAP_ALERT(
"%s: %s - invalid LP_DisconnectInd message size\n",
			__func__, NG_NODE_NAME(l2cap->node));
		error = EMSGSIZE;
		goto out;
	}

	ep = (ng_hci_lp_discon_ind_ep *) (msg->data);

	/* Check if we have this connection */
	con = ng_l2cap_con_by_handle(l2cap, ep->con_handle);
	if (con == NULL) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_DisconnectInd event. " \
"Connection does not exist, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ep->con_handle);
		error = ENOENT;
		goto out;
	}

	/* XXX Verify connection state -- do we need to check this? */
	if (con->state != NG_L2CAP_CON_OPEN) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_DisconnectInd event. " \
"Invalid connection state, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);
		error = EINVAL;
		goto out;
	}

	/* Notify upper layer and remove connection */
	con->state = NG_L2CAP_CON_CLOSED;
	ng_l2cap_con_fail(con, ep->reason);
out:
	return (error);
} /* ng_l2cap_lp_discon_ind */
开发者ID:MarginC，项目名称:kame，代码行数:46，代码来源:ng_l2cap_llpi.c


示例7: ng_getsockaddr

/*
 * Used for both data and control sockets
 */
static void
ng_getsockaddr(netmsg_t msg)
{
	struct socket *so = msg->sockaddr.base.nm_so;
	struct sockaddr **addr = msg->sockaddr.nm_nam;
	struct ngpcb *pcbp;
	struct sockaddr_ng *sg;
	int sg_len;
	int error = 0;

	/* Why isn't sg_data a `char[1]' ? :-( */
	sg_len = sizeof(struct sockaddr_ng) - sizeof(sg->sg_data) + 1;

	pcbp = sotongpcb(so);
	if ((pcbp == NULL) || (pcbp->sockdata == NULL)) {
		/* XXXGL: can this still happen? */
		error = EINVAL;
		goto replymsg;
	}

	mtx_lock(&pcbp->sockdata->mtx);
	if (pcbp->sockdata->node != NULL) {
		node_p node = pcbp->sockdata->node;
		int namelen = 0;	/* silence compiler! */

		if (NG_NODE_HAS_NAME(node))
			sg_len += namelen = strlen(NG_NODE_NAME(node));

		sg = kmalloc(sg_len, M_SONAME, M_WAITOK | M_ZERO);

		if (NG_NODE_HAS_NAME(node))
			bcopy(NG_NODE_NAME(node), sg->sg_data, namelen);

		sg->sg_len = sg_len;
		sg->sg_family = AF_NETGRAPH;
		*addr = (struct sockaddr *)sg;
		mtx_unlock(&pcbp->sockdata->mtx);
	} else {
		mtx_unlock(&pcbp->sockdata->mtx);
		error = EINVAL;
	}

replymsg:
	lwkt_replymsg(&msg->sockaddr.base.lmsg, error);
}
开发者ID:wan721，项目名称:DragonFlyBSD，代码行数:48，代码来源:ng_socket.c


示例8: ng_l2cap_lp_qos_ind

int
ng_l2cap_lp_qos_ind(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
	ng_hci_lp_qos_ind_ep	*ep = NULL;
	ng_l2cap_con_p		 con = NULL;
	int			 error = 0;

	/* Check message */
	if (msg->header.arglen != sizeof(*ep)) {
		NG_L2CAP_ALERT(
"%s: %s - invalid LP_QoSViolation message size\n",
			__func__, NG_NODE_NAME(l2cap->node));
		error = EMSGSIZE;
		goto out;
	}

	ep = (ng_hci_lp_qos_ind_ep *) (msg->data);

	/* Check if we have this connection */
	con = ng_l2cap_con_by_handle(l2cap, ep->con_handle);
	if (con == NULL) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_QoSViolationInd event. " \
"Connection does not exist, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ep->con_handle);
		error = ENOENT;
		goto out;
	}

	/* Verify connection state */
	if (con->state != NG_L2CAP_CON_OPEN) {
		NG_L2CAP_ERR(
"%s: %s - unexpected LP_QoSViolationInd event. " \
"Invalid connection state, state=%d, con_handle=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), con->state, 
			con->con_handle);
		error = EINVAL;
		goto out;
	}

	/* XXX FIXME Notify upper layer and terminate channels if required */
out:
	return (error);
} /* ng_l2cap_qos_ind */
开发者ID:AhmadTux，项目名称:freebsd，代码行数:44，代码来源:ng_l2cap_llpi.c


示例9: ng_l2cap_l2ca_con_rsp

int
ng_l2cap_l2ca_con_rsp(ng_l2cap_chan_p ch, u_int32_t token, u_int16_t result,
		u_int16_t status)
{
	ng_l2cap_p		 l2cap = ch->con->l2cap;
	struct ng_mesg		*msg = NULL;
	ng_l2cap_l2ca_con_op	*op = NULL;
	int			 error = 0;

	/* Check if upstream hook is connected and valid */
	if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
		NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_Connect response message. " \
"Hook is not connected or valid, psm=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ch->psm);

		return (ENOTCONN);
	}

	/* Create and send L2CA_Connect response message */
	NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_CON,
		sizeof(*op), M_NOWAIT);
	if (msg == NULL)
		error = ENOMEM;
	else {
		msg->header.token = token;
		msg->header.flags |= NGF_RESP;

		op = (ng_l2cap_l2ca_con_op *)(msg->data);
		
		/*
		 * XXX Spec. says we should only populate LCID when result == 0
		 * What about PENDING? What the heck, for now always populate
		 * LCID :)
		 */
		if(ch->scid == NG_L2CAP_ATT_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_ATT;
			op->lcid = ch->con->con_handle;
		}else if(ch->scid == NG_L2CAP_SMP_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_SMP;
			op->lcid = ch->con->con_handle;
		}else{
			op->idtype = (ch->con->linktype == NG_HCI_LINK_ACL)?
				NG_L2CAP_L2CA_IDTYPE_BREDR :
				NG_L2CAP_L2CA_IDTYPE_LE;
			op->lcid = ch->scid;				
		}
		op->encryption = ch->con->encryption;
		op->result = result;
		op->status = status;

		NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
	}

	return (error);
} /* ng_l2cap_l2ca_con_rsp */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:56，代码来源:ng_l2cap_ulpi.c


示例10: ng_hci_lp_con_req

int
ng_hci_lp_con_req(ng_hci_unit_p unit, item_p item, hook_p hook)
{
	if ((unit->state & NG_HCI_UNIT_READY) != NG_HCI_UNIT_READY) {
		NG_HCI_WARN(
"%s: %s - unit is not ready, state=%#x\n",
			__func__, NG_NODE_NAME(unit->node), unit->state);

		NG_FREE_ITEM(item);

		return (ENXIO);
	}

	if (NGI_MSG(item)->header.arglen != sizeof(ng_hci_lp_con_req_ep)) {
		NG_HCI_ALERT(
"%s: %s - invalid LP_ConnectReq message size=%d\n",
			__func__, NG_NODE_NAME(unit->node),
			NGI_MSG(item)->header.arglen);

		NG_FREE_ITEM(item);

		return (EMSGSIZE);
	}

	if (((ng_hci_lp_con_req_ep *)(NGI_MSG(item)->data))->link_type == NG_HCI_LINK_ACL)
		return (ng_hci_lp_acl_con_req(unit, item, hook));

	if (hook != unit->sco) {
		NG_HCI_WARN(
"%s: %s - LP_ConnectReq for SCO connection came from wrong hook=%p\n",
			__func__, NG_NODE_NAME(unit->node), hook);

		NG_FREE_ITEM(item);

		return (EINVAL);
	}

	return (ng_hci_lp_sco_con_req(unit, item, hook));
} /* ng_hci_lp_con_req */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:39，代码来源:ng_hci_ulpi.c


示例11: ng_hci_command_timeout

int
ng_hci_command_timeout(ng_hci_unit_p unit)
{
	if (unit->state & NG_HCI_UNIT_COMMAND_PENDING)
		panic(
"%s: %s - Duplicated command timeout!\n", __func__, NG_NODE_NAME(unit->node));

	unit->state |= NG_HCI_UNIT_COMMAND_PENDING;
	ng_callout(&unit->cmd_timo, unit->node, NULL,
				bluetooth_hci_command_timeout(),
				ng_hci_process_command_timeout, NULL, 0);

	return (0);
} /* ng_hci_command_timeout */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:14，代码来源:ng_hci_misc.c


示例12: ng_hci_con_untimeout

int
ng_hci_con_untimeout(ng_hci_unit_con_p con)
{
	if (!(con->flags & NG_HCI_CON_TIMEOUT_PENDING))
		panic(
"%s: %s - No connection timeout!\n", __func__, NG_NODE_NAME(con->unit->node));

	if (ng_uncallout(&con->con_timo, con->unit->node) == 0)
		return (ETIMEDOUT);

	con->flags &= ~NG_HCI_CON_TIMEOUT_PENDING;

	return (0);
} /* ng_hci_con_untimeout */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:14，代码来源:ng_hci_misc.c


示例13: ng_hci_command_untimeout

int
ng_hci_command_untimeout(ng_hci_unit_p unit)
{
	if (!(unit->state & NG_HCI_UNIT_COMMAND_PENDING))
		panic(
"%s: %s - No command timeout!\n", __func__, NG_NODE_NAME(unit->node));

	if (ng_uncallout(&unit->cmd_timo, unit->node) == 0)
		return (ETIMEDOUT);

	unit->state &= ~NG_HCI_UNIT_COMMAND_PENDING;

	return (0);
} /* ng_hci_command_untimeout */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:14，代码来源:ng_hci_misc.c


示例14: ng_l2cap_l2ca_write_rsp

int
ng_l2cap_l2ca_write_rsp(ng_l2cap_chan_p ch, u_int32_t token, u_int16_t result,
		u_int16_t length)
{
	ng_l2cap_p		 l2cap = ch->con->l2cap;
	struct ng_mesg		*msg = NULL;
	ng_l2cap_l2ca_write_op	*op = NULL;
	int			 error = 0;

	/* Check if upstream hook is connected and valid */
	if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
		NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_WriteRsp message. " \
"Hook is not connected or valid, psm=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ch->psm);

		return (ENOTCONN);
	}

	/* Create and send L2CA_WriteRsp message */
	NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_WRITE,
			sizeof(*op), M_NOWAIT);
	if (msg == NULL)
		error = ENOMEM;
	else {
		msg->header.token = token;
		msg->header.flags |= NGF_RESP;

		op = (ng_l2cap_l2ca_write_op *)(msg->data);
		op->result = result;
		op->length = length;
		if(ch->scid == NG_L2CAP_ATT_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_ATT;
			op->lcid = ch->con->con_handle;
		}else if(ch->scid == NG_L2CAP_SMP_CID){
			op->idtype = NG_L2CAP_L2CA_IDTYPE_SMP;
			op->lcid = ch->con->con_handle;
		}else{
			op->idtype = (ch->con->linktype == NG_HCI_LINK_ACL)?
				NG_L2CAP_L2CA_IDTYPE_BREDR :
				NG_L2CAP_L2CA_IDTYPE_LE;
			op->lcid = ch->scid;				
			
		}
		NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
	}

	return (error);
} /* ng_l2cap_l2ca_write_rsp */
开发者ID:hmatyschok，项目名称:MeshBSD，代码行数:49，代码来源:ng_l2cap_ulpi.c


示例15: ng_hci_con_timeout

int
ng_hci_con_timeout(ng_hci_unit_con_p con)
{
	if (con->flags & NG_HCI_CON_TIMEOUT_PENDING)
		panic(
"%s: %s - Duplicated connection timeout!\n",
			__func__, NG_NODE_NAME(con->unit->node));

	con->flags |= NG_HCI_CON_TIMEOUT_PENDING;
	ng_callout(&con->con_timo, con->unit->node, NULL,
				bluetooth_hci_connect_timeout(),
				ng_hci_process_con_timeout, NULL,
				con->con_handle);

	return (0);
} /* ng_hci_con_timeout */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:16，代码来源:ng_hci_misc.c


示例16: ng_hci_mtap

void
ng_hci_mtap(ng_hci_unit_p unit, struct mbuf *m0)
{
	struct mbuf	*m = NULL;
	int		 error = 0;

	if (unit->raw != NULL && NG_HOOK_IS_VALID(unit->raw)) {
		m = m_dup(m0, M_DONTWAIT);
		if (m != NULL)
			NG_SEND_DATA_ONLY(error, unit->raw, m);

		if (error != 0)
			NG_HCI_INFO(
"%s: %s - Could not forward packet, error=%d\n",
				__func__, NG_NODE_NAME(unit->node), error);
	}
} /* ng_hci_mtap */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:17，代码来源:ng_hci_misc.c


示例17: ng_hci_node_is_up

void
ng_hci_node_is_up(node_p node, hook_p hook, void *arg1, int arg2)
{
	ng_hci_unit_p		 unit = NULL;
	struct ng_mesg		*msg = NULL;
	ng_hci_node_up_ep	*ep = NULL;
	int			 error;

	if (node == NULL || NG_NODE_NOT_VALID(node) ||
	    hook == NULL || NG_HOOK_NOT_VALID(hook))
		return;

	unit = (ng_hci_unit_p) NG_NODE_PRIVATE(node);
	if ((unit->state & NG_HCI_UNIT_READY) != NG_HCI_UNIT_READY)
		return;

	if (hook != unit->acl && hook != unit->sco)
		return;

	NG_MKMESSAGE(msg,NGM_HCI_COOKIE,NGM_HCI_NODE_UP,sizeof(*ep),M_NOWAIT);
	if (msg != NULL) {
		ep = (ng_hci_node_up_ep *)(msg->data);

		if (hook == unit->acl) {
			NG_HCI_BUFF_ACL_SIZE(unit->buffer, ep->pkt_size);
			NG_HCI_BUFF_ACL_TOTAL(unit->buffer, ep->num_pkts);
		} else {
			NG_HCI_BUFF_SCO_SIZE(unit->buffer, ep->pkt_size);
			NG_HCI_BUFF_SCO_TOTAL(unit->buffer, ep->num_pkts);
		} 

		bcopy(&unit->bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));

		NG_SEND_MSG_HOOK(error, node, msg, hook, 0);
	} else
		error = ENOMEM;

	if (error != 0)
		NG_HCI_INFO(
"%s: %s - failed to send NODE_UP message to hook \"%s\", error=%d\n",
			__func__, NG_NODE_NAME(unit->node), 
			NG_HOOK_NAME(hook), error);
} /* ng_hci_node_is_up */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:43，代码来源:ng_hci_misc.c


示例18: ng_l2cap_lp_qos_cfm

int
ng_l2cap_lp_qos_cfm(ng_l2cap_p l2cap, struct ng_mesg *msg)
{
	ng_hci_lp_qos_cfm_ep	*ep = NULL;
	int			 error = 0;

	/* Check message */
	if (msg->header.arglen != sizeof(*ep)) {
		NG_L2CAP_ALERT(
"%s: %s - invalid LP_QoSSetupCfm[Neg] message size\n",
			__func__, NG_NODE_NAME(l2cap->node));
		error = EMSGSIZE;
		goto out;
	}

	ep = (ng_hci_lp_qos_cfm_ep *) (msg->data);
	/* XXX FIXME do something */
out:
	return (error);
} /* ng_l2cap_lp_qos_cfm */
开发者ID:AhmadTux，项目名称:freebsd，代码行数:20，代码来源:ng_l2cap_llpi.c


示例19: ng_hci_lp_con_ind

int
ng_hci_lp_con_ind(ng_hci_unit_con_p con, u_int8_t *uclass)
{
	ng_hci_unit_p		 unit = con->unit;
	struct ng_mesg		*msg = NULL;
	ng_hci_lp_con_ind_ep	*ep = NULL;
	hook_p			 hook = NULL;
	int			 error = 0;

	/*
	 * Connection_Request event is generated for specific link type.
	 * Use link_type to select upstream hook.
	 */

	if (con->link_type == NG_HCI_LINK_ACL)
		hook = unit->acl;
	else
		hook = unit->sco;

	if (hook != NULL && NG_HOOK_IS_VALID(hook)) {
		NG_MKMESSAGE(msg, NGM_HCI_COOKIE, NGM_HCI_LP_CON_IND, 
			sizeof(*ep), M_NOWAIT);
		if (msg == NULL)
			return (ENOMEM);

		ep = (ng_hci_lp_con_ind_ep *)(msg->data);
		ep->link_type = con->link_type;
		bcopy(uclass, ep->uclass, sizeof(ep->uclass));
		bcopy(&con->bdaddr, &ep->bdaddr, sizeof(ep->bdaddr));

		NG_SEND_MSG_HOOK(error, unit->node, msg, hook, 0);
	} else {
		NG_HCI_WARN(
"%s: %s - Upstream hook is not connected or not valid, hook=%p\n",
			__func__, NG_NODE_NAME(unit->node), hook);

		error = ENOTCONN;
	}

	return (error);
} /* ng_hci_lp_con_ind */
开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:41，代码来源:ng_hci_ulpi.c


示例20: ng_l2cap_l2ca_discon_ind

int
ng_l2cap_l2ca_discon_ind(ng_l2cap_chan_p ch)
{
	ng_l2cap_p			 l2cap = ch->con->l2cap;
	struct ng_mesg			*msg = NULL;
	ng_l2cap_l2ca_discon_ind_ip	*ip = NULL;
	int				 error = 0;

	/* Check if upstream hook is connected and valid */
	if (l2cap->l2c == NULL || NG_HOOK_NOT_VALID(l2cap->l2c)) {
		NG_L2CAP_ERR(
"%s: %s - unable to send L2CA_DisconnectInd message. " \
"Hook is not connected or valid, psm=%d\n",
			__func__, NG_NODE_NAME(l2cap->node), ch->psm);

		return (ENOTCONN);
	}

	/* Create and send L2CA_DisconnectInd message */
	NG_MKMESSAGE(msg, NGM_L2CAP_COOKIE, NGM_L2CAP_L2CA_DISCON_IND,
		sizeof(*ip), M_NOWAIT);
	if (msg == NULL)
		error = ENOMEM;
	else {
		ip = (ng_l2cap_l2ca_discon_ind_ip *)(msg->data);
		ip->idtype = ch->idtype;
		if(ch->idtype == NG_L2CAP_L2CA_IDTYPE_ATT||
		   ch->idtype == NG_L2CAP_L2CA_IDTYPE_SMP)
			ip->lcid = ch->con->con_handle;
		else
			ip->lcid = ch->scid;
		
		NG_SEND_MSG_HOOK(error, l2cap->node, msg, l2cap->l2c, 0);
	} 

	return (error);
} /* ng_l2cap_l2ca_discon_ind */
开发者ID:FreeBSDFoundation，项目名称:freebsd，代码行数:37，代码来源:ng_l2cap_ulpi.c



注：本文中的NG_NODE_NAME函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ NG_NODE_PRIVATE函数代码示例发布时间：2022-05-30
下一篇：
C++ NG_MKMESSAGE函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap