C++ rtw_get_current_time函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtw_get_current_time函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_get_current_time函数的具体用法？C++ rtw_get_current_time怎么用？C++ rtw_get_current_time使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtw_get_current_time函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtw_get_passing_time_ms

// the input parameter start use the same unit as returned by rtw_get_current_time
inline s32 rtw_get_passing_time_ms(u32 start)
{
#ifdef PLATFORM_LINUX
	return rtw_systime_to_ms(jiffies-start);
#endif
#ifdef PLATFORM_FREEBSD
	return rtw_systime_to_ms(rtw_get_current_time());
#endif	
#ifdef PLATFORM_WINDOWS
	LARGE_INTEGER	SystemTime;
	NdisGetCurrentSystemTime(&SystemTime);
	return rtw_systime_to_ms((u32)(SystemTime.LowPart) - start) ;
#endif
}

开发者ID:ChangYX，项目名称:Linux3188，代码行数:15，代码来源:osdep_service.c

示例2: sreset_reset

void sreset_reset(_adapter *padapter)
{
#ifdef DBG_CONFIG_ERROR_RESET
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
	struct pwrctrl_priv *pwrpriv = adapter_to_pwrctl(padapter);
	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	_irqL irqL;
	u32 start = rtw_get_current_time();
	struct dvobj_priv *psdpriv = padapter->dvobj;
	struct debug_priv *pdbgpriv = &psdpriv->drv_dbg;

	DBG_871X("%s\n", __FUNCTION__);

	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;


#ifdef CONFIG_LPS
	rtw_set_ps_mode(padapter, PS_MODE_ACTIVE, 0, 0, "SRESET");
#endif//#ifdef CONFIG_LPS
	
	_enter_pwrlock(&pwrpriv->lock);

	psrtpriv->silent_reset_inprogress = _TRUE;
	pwrpriv->change_rfpwrstate = rf_off;

	sreset_stop_adapter(padapter);
	#ifdef CONFIG_CONCURRENT_MODE
	sreset_stop_adapter(padapter->pbuddy_adapter);
	#endif

	#ifdef CONFIG_IPS
	_ips_enter(padapter);
	_ips_leave(padapter);
	#endif

	sreset_start_adapter(padapter);
	#ifdef CONFIG_CONCURRENT_MODE
	sreset_start_adapter(padapter->pbuddy_adapter);
	#endif

	psrtpriv->silent_reset_inprogress = _FALSE;

	_exit_pwrlock(&pwrpriv->lock);

	DBG_871X("%s done in %d ms\n", __FUNCTION__, rtw_get_passing_time_ms(start));
	pdbgpriv->dbg_sreset_cnt++;
#endif
}

开发者ID:austinmarton，项目名称:rtl8812au_linux，代码行数:50，代码来源:rtw_sreset.c

示例3: rtw_ips_pwr_down

void rtw_ips_pwr_down(_adapter *padapter)
{
	u32 start_time = rtw_get_current_time();
	DBG_8192C("===> rtw_ips_pwr_down...................\n");

	padapter->bCardDisableWOHSM = _TRUE;
	padapter->net_closed = _TRUE;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);
	
	rtw_ips_dev_unload(padapter);
	padapter->bCardDisableWOHSM = _FALSE;
	DBG_8192C("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time));
}

开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:14，代码来源:os_intfs.c

示例4: rtw_ips_pwr_up

int rtw_ips_pwr_up(_adapter *padapter)
{	
	int result;
	u32 start_time = rtw_get_current_time();
	DBG_8192C("===>  rtw_ips_pwr_up..............\n");
	rtw_reset_drv_sw(padapter);
	result = ips_netdrv_open(padapter);

	rtw_led_control(padapter, LED_CTL_NO_LINK);
	
 	DBG_8192C("<===  rtw_ips_pwr_up.............. in %dms\n", rtw_get_passing_time_ms(start_time));
	return result;

}

开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:14，代码来源:os_intfs.c

示例5: rtw_ips_pwr_down

void rtw_ips_pwr_down(struct adapter *padapter)
{
	u32 start_time = rtw_get_current_time();
	DBG_88E("===> rtw_ips_pwr_down...................\n");

	padapter->bCardDisableWOHSM = true;
	padapter->net_closed = true;

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_ips_dev_unload(padapter);
	padapter->bCardDisableWOHSM = false;
	DBG_88E("<=== rtw_ips_pwr_down..................... in %dms\n", rtw_get_passing_time_ms(start_time));
}

开发者ID:BozkurTR，项目名称:kernel，代码行数:14，代码来源:os_intfs.c

示例6: rtl8723a_sreset_xmit_status_check

void rtl8723a_sreset_xmit_status_check(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;

	unsigned long current_time;
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	unsigned int diff_time;
	u32 txdma_status;


	if( (txdma_status=rtw_read32(padapter, REG_TXDMA_STATUS)) !=0x00){
		DBG_8723A("%s REG_TXDMA_STATUS:0x%08x\n", __FUNCTION__, txdma_status);
		rtw_hal_sreset_reset(padapter);
	}

#ifdef CONFIG_USB_HCI
	//total xmit irp = 4
	//DBG_8723A("==>%s free_xmitbuf_cnt(%d),txirp_cnt(%d)\n",__FUNCTION__,pxmitpriv->free_xmitbuf_cnt,pxmitpriv->txirp_cnt);
	//if(pxmitpriv->txirp_cnt == NR_XMITBUFF+1)
	current_time = rtw_get_current_time();

	if(0 == pxmitpriv->free_xmitbuf_cnt || 0 == pxmitpriv->free_xmit_extbuf_cnt) {

		diff_time = rtw_get_passing_time_ms(psrtpriv->last_tx_time);

		if (diff_time > 2000) {
			if (psrtpriv->last_tx_complete_time == 0) {
				psrtpriv->last_tx_complete_time = current_time;
			}
			else{
				diff_time = rtw_get_passing_time_ms(psrtpriv->last_tx_complete_time);
				if (diff_time > 4000) {
					//padapter->Wifi_Error_Status = WIFI_TX_HANG;
					DBG_8723A("%s tx hang\n", __FUNCTION__);
					rtw_hal_sreset_reset(padapter);
				}
			}
		}
	}
#endif // #ifdef CONFIG_USB_HCI

	if (psrtpriv->dbg_trigger_point == SRESET_TGP_XMIT_STATUS) {
		psrtpriv->dbg_trigger_point = SRESET_TGP_NULL;
		rtw_hal_sreset_reset(padapter);
		return;
	}
}

开发者ID:Erwyn，项目名称:rtl8723au，代码行数:48，代码来源:rtl8723a_sreset.c

示例7: PS_RDY_CHECK

u8 PS_RDY_CHECK(_adapter * padapter)
{
	u32 curr_time, delta_time;
	struct pwrctrl_priv	*pwrpriv = adapter_to_pwrctl(padapter);
	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);

#ifdef CONFIG_WOWLAN
	if(_TRUE == pwrpriv->bInSuspend && pwrpriv->wowlan_mode)
		return _TRUE;
	else if (_TRUE == pwrpriv->bInSuspend)
		return _FALSE;
#else
	if(_TRUE == pwrpriv->bInSuspend )
		return _FALSE;
#endif

	curr_time = rtw_get_current_time();
	delta_time = curr_time -pwrpriv->DelayLPSLastTimeStamp;

	if(delta_time < LPS_DELAY_TIME)
	{
		return _FALSE;
	}

	if ((check_fwstate(pmlmepriv, _FW_LINKED) == _FALSE) ||
		(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) ||
		(check_fwstate(pmlmepriv, WIFI_UNDER_WPS) == _TRUE) ||
		(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE) ||
		(check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) ||
		(check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) == _TRUE) )
		return _FALSE;

	if( (padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) && (padapter->securitypriv.binstallGrpkey == _FALSE) )
	{
		DBG_871X("Group handshake still in progress !!!\n");
		return _FALSE;
	}

#ifdef CONFIG_IOCTL_CFG80211
	if (!rtw_cfg80211_pwr_mgmt(padapter))
		return _FALSE;
#endif

	return _TRUE;
}

开发者ID:OpenLD，项目名称:linux-wetek-3.10.y，代码行数:45，代码来源:rtw_pwrctrl.c

示例8: rtw_hal_read_chip_info

void rtw_hal_read_chip_info(_adapter *padapter)
{
	u8 hci_type = rtw_get_intf_type(padapter);
	u32 start = rtw_get_current_time();

	/*  before access eFuse, make sure card enable has been called */
	if ((hci_type == RTW_SDIO || hci_type == RTW_GSPI)
		&& !rtw_is_hw_init_completed(padapter))
		rtw_hal_power_on(padapter);

	padapter->HalFunc.read_adapter_info(padapter);

	if ((hci_type == RTW_SDIO || hci_type == RTW_GSPI)
		&& !rtw_is_hw_init_completed(padapter))
		rtw_hal_power_off(padapter);

	DBG_871X("%s in %d ms\n", __func__, rtw_get_passing_time_ms(start));
}

开发者ID:ConiKost，项目名称:rtl88XXAU，代码行数:18，代码来源:hal_intf.c

示例9: _rtw_mi_busy_traffic_check

u8 _rtw_mi_busy_traffic_check(_adapter *padapter, void *data)
{
    u32 passtime;
    struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
    bool check_sc_interval = *(bool *)data;

    if (pmlmepriv->LinkDetectInfo.bBusyTraffic == _TRUE) {
        if (check_sc_interval) {
            /* Miracast can't do AP scan*/
            passtime = rtw_get_passing_time_ms(pmlmepriv->lastscantime);
            pmlmepriv->lastscantime = rtw_get_current_time();
            if (passtime > BUSY_TRAFFIC_SCAN_DENY_PERIOD) {
                RTW_INFO(ADPT_FMT" bBusyTraffic == _TRUE\n", ADPT_ARG(padapter));
                return _TRUE;
            }
        } else
            return _TRUE;
    }

    return _FALSE;
}

开发者ID:plathome，项目名称:debian_based_firmware，代码行数:21，代码来源:rtw_mi.c

示例10: rtl8723b_sreset_xmit_status_check

void rtl8723b_sreset_xmit_status_check(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;

	unsigned long current_time;
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	unsigned int diff_time;
	u32 txdma_status;


	if( (txdma_status=rtw_read32(padapter, REG_TXDMA_STATUS)) !=0x00){
		DBG_871X("%s REG_TXDMA_STATUS:0x%08x\n", __FUNCTION__, txdma_status);
		rtl8723b_silentreset_for_specific_platform(padapter);
	}

#ifdef CONFIG_USB_HCI
	//total xmit irp = 4
	//DBG_8192C("==>%s free_xmitbuf_cnt(%d),txirp_cnt(%d)\n",__FUNCTION__,pxmitpriv->free_xmitbuf_cnt,pxmitpriv->txirp_cnt);
	current_time = rtw_get_current_time();
	if(0==pxmitpriv->free_xmitbuf_cnt)
	{
		diff_time = jiffies_to_msecs(current_time - psrtpriv->last_tx_time);

		if(diff_time > 2000){
			if(psrtpriv->last_tx_complete_time==0){
				psrtpriv->last_tx_complete_time = current_time;
			}
			else{
				diff_time = jiffies_to_msecs(current_time - psrtpriv->last_tx_complete_time);
				if(diff_time > 4000){
					//padapter->Wifi_Error_Status = WIFI_TX_HANG;
					DBG_8192C("%s tx hang\n", __FUNCTION__);
					rtl8723b_silentreset_for_specific_platform(padapter);
				}
			}
		}
	}
#endif // #ifdef CONFIG_USB_HCI
}

开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:40，代码来源:rtl8723b_sreset.c

示例11: sreset_reset

void sreset_reset(_adapter *padapter)
{
#ifdef DBG_CONFIG_ERROR_RESET
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv	*pmlmepriv = &(padapter->mlmepriv);
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	_irqL irqL;
	u32 start = rtw_get_current_time();

	DBG_871X("%s\n", __FUNCTION__);

	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;

	_enter_critical_mutex(&psrtpriv->silentreset_mutex, &irqL);
	psrtpriv->silent_reset_inprogress = _TRUE;
	pwrpriv->change_rfpwrstate = rf_off;

	sreset_stop_adapter(padapter);
	#ifdef CONFIG_CONCURRENT_MODE
	sreset_stop_adapter(padapter->pbuddy_adapter);
	#endif

	#ifdef CONFIG_IPS
	ips_enter(padapter);
	ips_leave(padapter);
	#endif

	sreset_start_adapter(padapter);
	#ifdef CONFIG_CONCURRENT_MODE
	sreset_start_adapter(padapter->pbuddy_adapter);
	#endif

	psrtpriv->silent_reset_inprogress = _FALSE;
	_exit_critical_mutex(&psrtpriv->silentreset_mutex, &irqL);

	DBG_871X("%s done in %d ms\n", __FUNCTION__, rtw_get_passing_time_ms(start));
#endif
}

开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:40，代码来源:rtw_sreset.c

示例12: rtw_lps_leave

void rtw_lps_leave(struct rtw_adapter *padapter)
{
#define LPS_LEAVE_TIMEOUT_MS 100

	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	u32 start_time;
	bool bAwake = false;

#ifdef CONFIG_CONCURRENT_MODE
	if (padapter->iface_type != IFACE_PORT0)
		return;		/* Skip power saving for concurrent mode port 1 */
#endif

	if (pwrpriv->bLeisurePs) {
		if (pwrpriv->pwr_mode != PS_MODE_ACTIVE) {
			rtw_set_ps_mode(padapter, PS_MODE_ACTIVE, 0);

			if (pwrpriv->pwr_mode == PS_MODE_ACTIVE) {
				start_time = rtw_get_current_time();
				while (1) {
					rtw_hal_get_hwreg(padapter,
							  HW_VAR_FWLPS_RF_ON,
							  (u8 *)(&bAwake));

					if (bAwake || padapter->bSurpriseRemoved)
						break;

					if (rtw_get_passing_time_ms(start_time) > LPS_LEAVE_TIMEOUT_MS) {
						DBG_8192D
						    ("Wait for FW LPS leave more than %u ms!!!\n",
						     LPS_LEAVE_TIMEOUT_MS);
						break;
					}
					rtw_usleep_os(100);
				}
			}
		}
	}

}

开发者ID:Eventide，项目名称:rtl8192du，代码行数:40，代码来源:rtw_pwrctrl.c

示例13: rtw_handle_tkip_countermeasure

u8 rtw_handle_tkip_countermeasure(_adapter* padapter)
{
	u8 status = _SUCCESS;
	u32 cur_time = 0;
		
	if (padapter->securitypriv.btkip_countermeasure == _TRUE) {
		cur_time = rtw_get_current_time();

		if( (cur_time - padapter->securitypriv.btkip_countermeasure_time) > 60 * HZ )
		{
			padapter->securitypriv.btkip_countermeasure = _FALSE;
			padapter->securitypriv.btkip_countermeasure_time = 0;
		}
		else
		{
			status = _FAIL;			
		}
	}

	return status;
	
}

开发者ID:Alex-van-der-Peet，项目名称:rtl8812AU_8821AU_linux，代码行数:22，代码来源:mlme_linux.c

示例14: rtl8192c_sreset_xmit_status_check

void rtl8192c_sreset_xmit_status_check(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);	
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;	
	
	unsigned long current_time;
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	unsigned int diff_time;
	
	if(rtw_read32(padapter, REG_TXDMA_STATUS) !=0x00){
		rtl8192c_silentreset_for_specific_platform(padapter);						
	}
	
	//total xmit irp = 4
	//DBG_8192C("==>%s free_xmitbuf_cnt(%d),txirp_cnt(%d)\n",__FUNCTION__,pxmitpriv->free_xmitbuf_cnt,pxmitpriv->txirp_cnt);
	//if(pxmitpriv->txirp_cnt == NR_XMITBUFF+1)
	current_time = rtw_get_current_time();
	if(0==pxmitpriv->free_xmitbuf_cnt)
	{
		diff_time = jiffies_to_msecs(current_time - psrtpriv->last_tx_time);
			
		if(diff_time > 2000){
			if(psrtpriv->last_tx_complete_time==0){
				psrtpriv->last_tx_complete_time = current_time;
			}
			else{
				diff_time = jiffies_to_msecs(current_time - psrtpriv->last_tx_complete_time);
				if(diff_time > 4000){
					//padapter->Wifi_Error_Status = WIFI_TX_HANG;
					DBG_8192C("tx hang...start reset\n");
					rtl8192c_silentreset_for_specific_platform(padapter);	
				}
			}
		}	
	}	
}

开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:36，代码来源:rtl8192c_sreset.c

示例15: rtw_resume_process

int rtw_resume_process(_adapter *padapter)
{
	struct net_device *pnetdev;
	struct pwrctrl_priv *pwrpriv;
	u8 is_pwrlock_hold_by_caller;
	u8 is_directly_called_by_auto_resume;
	int ret = 0;
	u32 start_time = rtw_get_current_time();

	_func_enter_;

	DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);

	rtw_wifi_gpio_wlan_ctrl(WLAN_PWDN_ON);
	rtw_mdelay_os(1);

	{
		u32 ret = 0;
		DBG_8192C("read start:\n");
		//spi_write8_endian(padapter, SPI_LOCAL_OFFSET | 0xF0, 0x01, 1);
		rtw_write8(padapter, SPI_LOCAL_OFFSET | 0xF0, 0x03);
		ret = rtw_read32(padapter, SPI_LOCAL_OFFSET | 0xF0);
		DBG_8192C("read end 0xF0 read32:%x:\n", ret);
		DBG_8192C("read end 0xF0 read8:%x:\n", rtw_read8(padapter, SPI_LOCAL_OFFSET | 0xF0));

	}

	if (padapter) {
		pnetdev = padapter->pnetdev;
		pwrpriv = &padapter->pwrctrlpriv;
	} else {
		ret = -1;
		goto exit;
	}

	// interface init
	if (gspi_init(adapter_to_dvobj(padapter)) != _SUCCESS)
	{
		ret = -1;
		RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("%s: initialize SDIO Failed!!\n", __FUNCTION__));
		goto exit;
	}
	rtw_hal_disable_interrupt(padapter);
	if (gspi_alloc_irq(adapter_to_dvobj(padapter)) != _SUCCESS)
	{
		ret = -1;
		RT_TRACE(_module_hci_intfs_c_, _drv_err_, ("%s: gspi_alloc_irq Failed!!\n", __FUNCTION__));
		goto exit;
	}

	rtw_reset_drv_sw(padapter);
	pwrpriv->bkeepfwalive = _FALSE;

	DBG_871X("bkeepfwalive(%x)\n",pwrpriv->bkeepfwalive);
	if(pm_netdev_open(pnetdev,_TRUE) != 0) {
		ret = -1;
		goto exit;
	}

	netif_device_attach(pnetdev);
	netif_carrier_on(pnetdev);

	if( padapter->pid[1]!=0) {
		DBG_871X("pid[1]:%d\n",padapter->pid[1]);
		rtw_signal_process(padapter->pid[1], SIGUSR2);
	}

	#ifdef CONFIG_LAYER2_ROAMING_RESUME
	rtw_roaming(padapter, NULL);
	#endif

	#ifdef CONFIG_RESUME_IN_WORKQUEUE
	rtw_unlock_suspend();
	#endif //CONFIG_RESUME_IN_WORKQUEUE

exit:
	pwrpriv->bInSuspend = _FALSE;
	DBG_871X("<===  %s return %d.............. in %dms\n", __FUNCTION__
		, ret, rtw_get_passing_time_ms(start_time));

	_func_exit_;

	return ret;
}

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:84，代码来源:gspi_intf.c

示例16: rtw_gspi_suspend

static int rtw_gspi_suspend(struct spi_device *spi, pm_message_t mesg)
{
	struct dvobj_priv *dvobj = spi_get_drvdata(spi);
	PADAPTER padapter = dvobj->if1;
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct net_device *pnetdev = padapter->pnetdev;
	int ret = 0;

	u32 start_time = rtw_get_current_time();

	_func_enter_;

	DBG_871X("==> %s (%s:%d)\n",__FUNCTION__, current->comm, current->pid);

	pwrpriv->bInSuspend = _TRUE;

	while (pwrpriv->bips_processing == _TRUE)
		rtw_msleep_os(1);

	if((!padapter->bup) || (padapter->bDriverStopped)||(padapter->bSurpriseRemoved))
	{
		DBG_871X("%s bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n", __FUNCTION__
			,padapter->bup, padapter->bDriverStopped,padapter->bSurpriseRemoved);
		goto exit;
	}

	rtw_cancel_all_timer(padapter);
	LeaveAllPowerSaveMode(padapter);

	//padapter->net_closed = _TRUE;
	//s1.
	if(pnetdev)
	{
		netif_carrier_off(pnetdev);
		rtw_netif_stop_queue(pnetdev);
	}
#ifdef CONFIG_WOWLAN
	padapter->pwrctrlpriv.bSupportRemoteWakeup=_TRUE;
#else
	//s2.
	//s2-1.  issue rtw_disassoc_cmd to fw
	disconnect_hdl(padapter, NULL);
	//rtw_disassoc_cmd(padapter);
#endif

#ifdef CONFIG_LAYER2_ROAMING_RESUME
	if(check_fwstate(pmlmepriv, WIFI_STATION_STATE) && check_fwstate(pmlmepriv, _FW_LINKED) )
	{
		DBG_871X("%s %s(" MAC_FMT "), length:%d assoc_ssid.length:%d\n",__FUNCTION__,
				pmlmepriv->cur_network.network.Ssid.Ssid,
				MAC_ARG(pmlmepriv->cur_network.network.MacAddress),
				pmlmepriv->cur_network.network.Ssid.SsidLength,
				pmlmepriv->assoc_ssid.SsidLength);

		pmlmepriv->to_roaming = 1;
	}
#endif

	//s2-2.  indicate disconnect to os
	rtw_indicate_disconnect(padapter);
	//s2-3.
	rtw_free_assoc_resources(padapter, 1);

	//s2-4.
	rtw_free_network_queue(padapter, _TRUE);

	rtw_led_control(padapter, LED_CTL_POWER_OFF);

	rtw_dev_unload(padapter);

	if(check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
		rtw_indicate_scan_done(padapter, 1);

	if(check_fwstate(pmlmepriv, _FW_UNDER_LINKING))
		rtw_indicate_disconnect(padapter);

	// interface deinit
	gspi_deinit(dvobj);
	RT_TRACE(_module_hci_intfs_c_, _drv_notice_, ("%s: deinit GSPI complete!\n", __FUNCTION__));

	rtw_wifi_gpio_wlan_ctrl(WLAN_PWDN_OFF);
	rtw_mdelay_os(1);
exit:
	DBG_871X("<===  %s return %d.............. in %dms\n", __FUNCTION__
		, ret, rtw_get_passing_time_ms(start_time));

	_func_exit_;
	return ret;
}

开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:90，代码来源:gspi_intf.c

示例17: rtw_set_802_11_ssid


//.........这里部分代码省略.........
#ifdef CONFIG_LPS
			else {
				rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_JOINBSS, 1);
			}
#endif
		}
		else
		{
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set SSID not the same ssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_ssid=[%s] len=0x%x\n", ssid->Ssid, (unsigned int)ssid->SsidLength));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("assoc_ssid=[%s] len=0x%x\n", pmlmepriv->assoc_ssid.Ssid, (unsigned int)pmlmepriv->assoc_ssid.SsidLength));

			rtw_disassoc_cmd(padapter);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(padapter);
			
			rtw_free_assoc_resources(padapter, 1);

			if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}
		}		
	}

handle_tkip_countermeasure:
#ifdef PLATFORM_WINDOWS
	if (padapter->securitypriv.btkip_countermeasure==_TRUE)
	{
		LARGE_INTEGER	sys_time;
		u32  diff_time,cur_time ;
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:padapter->securitypriv.btkip_countermeasure==_TRUE\n"));
		NdisGetCurrentSystemTime(&sys_time);	
		cur_time=(u32)(sys_time.QuadPart/10);  // In micro-second.
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:cur_time=0x%x\n",cur_time));
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:psecuritypriv->last_mic_err_time=0x%x\n",padapter->securitypriv.btkip_countermeasure_time));
		diff_time = cur_time -padapter->securitypriv.btkip_countermeasure_time; // In micro-second.
		RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid:diff_time=0x%x\n",diff_time));

		if (diff_time > 60000000) {
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid(): countermeasure time >60s.\n"));
			padapter->securitypriv.btkip_countermeasure=_FALSE;
			// Update MIC error time.
			padapter->securitypriv.btkip_countermeasure_time=0;
		} else {
			// can't join  in 60 seconds.
			status = _FAIL;
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("rtw_set_802_11_ssid(): countermeasure time <60s.\n"));
			goto release_mlme_lock;
		}
	}
#endif

#ifdef PLATFORM_LINUX
	if (padapter->securitypriv.btkip_countermeasure == _TRUE) {
		cur_time = rtw_get_current_time();

		if( (cur_time - padapter->securitypriv.btkip_countermeasure_time) > 60 * HZ )
		{
			padapter->securitypriv.btkip_countermeasure = _FALSE;
			padapter->securitypriv.btkip_countermeasure_time = 0;
		}
		else
		{
			status = _FAIL;
			goto release_mlme_lock;
		}
	}
#endif

	#ifdef CONFIG_VALIDATE_SSID
	if (rtw_validate_ssid(ssid) == _FALSE) {
		status = _FAIL;
		goto release_mlme_lock;
	}
	#endif

	_rtw_memcpy(&pmlmepriv->assoc_ssid, ssid, sizeof(NDIS_802_11_SSID));
	pmlmepriv->assoc_by_bssid=_FALSE;

	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		pmlmepriv->to_join = _TRUE;	
	}
	else {
		status = rtw_do_join(padapter);
	}

release_mlme_lock:
	_exit_critical_bh(&pmlmepriv->lock, &irqL);

exit:
	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
		("-rtw_set_802_11_ssid: status=%d\n", status));
	
_func_exit_;

	return status;
	
}

开发者ID:pocketbook，项目名称:U7，代码行数:101，代码来源:rtw_ioctl_set.c

示例18: rtw_set_802_11_bssid

u8 rtw_set_802_11_bssid(_adapter* padapter, u8 *bssid)
{	
	_irqL irqL;	
	u8 status=_SUCCESS;
	u32 cur_time = 0;

	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	
_func_enter_;
	
	DBG_871X_LEVEL(_drv_always_, "set bssid:%pM\n", bssid);

	if ((bssid[0]==0x00 && bssid[1]==0x00 && bssid[2]==0x00 && bssid[3]==0x00 && bssid[4]==0x00 &&bssid[5]==0x00) ||
	    (bssid[0]==0xFF && bssid[1]==0xFF && bssid[2]==0xFF && bssid[3]==0xFF && bssid[4]==0xFF &&bssid[5]==0xFF))
	{
		status = _FAIL;
		goto exit;
	}
		
	_enter_critical_bh(&pmlmepriv->lock, &irqL);


	DBG_871X("Set BSSID under fw_state=0x%08x\n", get_fwstate(pmlmepriv));
	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		goto handle_tkip_countermeasure;
	} else if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == _TRUE) {
		goto release_mlme_lock;
	}

	if (check_fwstate(pmlmepriv, _FW_LINKED|WIFI_ADHOC_MASTER_STATE) == _TRUE)
	{
		RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_info_, ("set_bssid: _FW_LINKED||WIFI_ADHOC_MASTER_STATE\n"));

		if (_rtw_memcmp(&pmlmepriv->cur_network.network.MacAddress, bssid, ETH_ALEN) == _TRUE)
		{		
			if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == _FALSE)
				goto release_mlme_lock;//it means driver is in WIFI_ADHOC_MASTER_STATE, we needn't create bss again.
		} else {
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("Set BSSID not the same bssid\n"));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("set_bssid="MAC_FMT"\n", MAC_ARG(bssid) ));
			RT_TRACE(_module_rtl871x_ioctl_set_c_,_drv_info_,("cur_bssid="MAC_FMT"\n", MAC_ARG(pmlmepriv->cur_network.network.MacAddress) ));

			rtw_disassoc_cmd(padapter);

			if (check_fwstate(pmlmepriv, _FW_LINKED) == _TRUE)
				rtw_indicate_disconnect(padapter);

			rtw_free_assoc_resources(padapter, 1);

			if ((check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == _TRUE)) {
				_clr_fwstate_(pmlmepriv, WIFI_ADHOC_MASTER_STATE);
				set_fwstate(pmlmepriv, WIFI_ADHOC_STATE);
			}		
		}
	}

handle_tkip_countermeasure:
	//should we add something here...?

#ifdef PLATFORM_LINUX
	if (padapter->securitypriv.btkip_countermeasure == _TRUE) {
		cur_time = rtw_get_current_time();

		if( (cur_time - padapter->securitypriv.btkip_countermeasure_time) > 60 * HZ )
		{
			padapter->securitypriv.btkip_countermeasure = _FALSE;
			padapter->securitypriv.btkip_countermeasure_time = 0;
		}
		else
		{
			status = _FAIL;
			goto release_mlme_lock;
		}
	}
#endif

	_rtw_memcpy(&pmlmepriv->assoc_bssid, bssid, ETH_ALEN);
	pmlmepriv->assoc_by_bssid=_TRUE;

	if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY) == _TRUE) {
		pmlmepriv->to_join = _TRUE;	
	}
	else {
		status = rtw_do_join(padapter);
	}

release_mlme_lock:
	_exit_critical_bh(&pmlmepriv->lock, &irqL);
		
exit:
	RT_TRACE(_module_rtl871x_ioctl_set_c_, _drv_err_,
		("rtw_set_802_11_bssid: status=%d\n", status));
	
_func_exit_;

	return status;
}

开发者ID:pocketbook，项目名称:U7，代码行数:97，代码来源:rtw_ioctl_set.c

示例19: usb_write_port


//.........这里部分代码省略.........
	_exit_critical(&pxmitpriv->lock, &irqL);
		
	purb	= pxmitbuf->pxmit_urb[0];

#if 0
	if(pdvobj->ishighspeed)
	{
		if(cnt> 0 && cnt%512 == 0)
		{
			//DBG_8192C("ishighspeed, cnt=%d\n", cnt);
			bwritezero = _TRUE;			
		}	
	}
	else
	{
		if(cnt > 0 && cnt%64 == 0)
		{
			//DBG_8192C("cnt=%d\n", cnt);
			bwritezero = _TRUE;			
		}	
	}
#endif

	//translate DMA FIFO addr to pipehandle
	pipe = ffaddr2pipehdl(pdvobj, addr);	

#ifdef CONFIG_REDUCE_USB_TX_INT	
	if ( (pxmitpriv->free_xmitbuf_cnt%NR_XMITBUFF == 0)
		|| (pxmitbuf->ext_tag == _TRUE) )
	{
		purb->transfer_flags  &=  (~URB_NO_INTERRUPT);
	} else {
		purb->transfer_flags  |=  URB_NO_INTERRUPT;
		//DBG_8192C("URB_NO_INTERRUPT ");
	}
#endif


	usb_fill_bulk_urb(purb, pusbd, pipe, 
       				pxmitframe->buf_addr, //= pxmitbuf->pbuf
              			cnt,
              			usb_write_port_complete,
              			pxmitbuf);//context is pxmitbuf
              			
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_TX
	purb->transfer_dma = pxmitbuf->dma_transfer_addr;
	purb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
	purb->transfer_flags |= URB_ZERO_PACKET;
#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX
              			
#if 0
	if (bwritezero)
        {
            purb->transfer_flags |= URB_ZERO_PACKET;           
        }			
#endif

	status = usb_submit_urb(purb, GFP_ATOMIC);
	if (!status) {
		#ifdef DBG_CONFIG_ERROR_DETECT	
		{	
			HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
			pHalData->srestpriv.last_tx_time = rtw_get_current_time();		
		}
		#endif
	} else {
		rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_WRITE_PORT_ERR);
		DBG_871X("usb_write_port, status=%d\n", status);
		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port(): usb_submit_urb, status=%x\n", status));
		
		switch (status) {
		case -ENODEV:
			padapter->bDriverStopped=_TRUE;
			break;
		default:
			break;
		}
		goto exit;
	}

	ret= _SUCCESS;

//   Commented by Albert 2009/10/13
//   We add the URB_ZERO_PACKET flag to urb so that the host will send the zero packet automatically.
/*	
	if(bwritezero == _TRUE)
	{
		usb_bulkout_zero(pintfhdl, addr);
	}
*/

	RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("-usb_write_port\n"));

exit:
	if (ret != _SUCCESS)
		rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
_func_exit_;
	return ret;

}

开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:101，代码来源:usb_ops_linux.c

示例20: usb_write_port_complete


//.........这里部分代码省略.........
			//DBG_8192C("pxmitpriv->viq_cnt=%d\n", pxmitpriv->viq_cnt);
			break;
		case 6:
		case 7:
			pxmitpriv->voq_cnt--;
			//DBG_8192C("pxmitpriv->voq_cnt=%d\n", pxmitpriv->voq_cnt);
			break;
		case 0:
		case 3:			
		default:
			pxmitpriv->beq_cnt--;
			//DBG_8192C("pxmitpriv->beq_cnt=%d\n", pxmitpriv->beq_cnt);
			break;
			
	}	
	
	_exit_critical(&pxmitpriv->lock, &irqL);
	
	
	if(pxmitpriv->txirp_cnt==0)
	{
		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: txirp_cnt== 0, set allrxreturnevt!\n"));		
		_rtw_up_sema(&(pxmitpriv->tx_retevt));
	}
*/
        //rtw_free_xmitframe(pxmitpriv, pxmitframe);
	
	if(padapter->bSurpriseRemoved || padapter->bDriverStopped ||padapter->bWritePortCancel)
	{
		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped(%d) OR bSurpriseRemoved(%d)", padapter->bDriverStopped, padapter->bSurpriseRemoved));
		DBG_8192C("%s(): TX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bWritePortCancel(%d) pxmitbuf->ext_tag(%x) \n", 
		__FUNCTION__,padapter->bDriverStopped, padapter->bSurpriseRemoved,padapter->bReadPortCancel,pxmitbuf->ext_tag);	

		goto check_completion;
	}


	if (purb->status==0) {
	
	} else {
		RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete : purb->status(%d) != 0 \n", purb->status));
		DBG_871X("###=> urb_write_port_complete status(%d)\n",purb->status);
		if((purb->status==-EPIPE)||(purb->status==-EPROTO))
		{
			//usb_clear_halt(pusbdev, purb->pipe);	
			//msleep(10);
			sreset_set_wifi_error_status(padapter, USB_WRITE_PORT_FAIL);
		} else if (purb->status == -EINPROGRESS) {
			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: EINPROGESS\n"));
			goto check_completion;

		} else if (purb->status == -ENOENT) {
			DBG_871X("%s: -ENOENT\n", __func__);
			goto check_completion;
			
		} else if (purb->status == -ECONNRESET) {
			DBG_871X("%s: -ECONNRESET\n", __func__);
			goto check_completion;

		} else if (purb->status == -ESHUTDOWN) {
			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete: ESHUTDOWN\n"));
			padapter->bDriverStopped=_TRUE;
			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bDriverStopped=TRUE\n"));

			goto check_completion;
		}
		else
		{					
			padapter->bSurpriseRemoved=_TRUE;
			DBG_8192C("bSurpriseRemoved=TRUE\n");
			//rtl8192cu_trigger_gpio_0(padapter);
			RT_TRACE(_module_hci_ops_os_c_,_drv_err_,("usb_write_port_complete:bSurpriseRemoved=TRUE\n"));

			goto check_completion;
		}
	}

	#ifdef DBG_CONFIG_ERROR_DETECT
	{	
		HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
		pHalData->srestpriv.last_tx_complete_time = rtw_get_current_time();		
	}
	#endif

check_completion:
	_enter_critical(&pxmitpriv->lock_sctx, &irqL);
	rtw_sctx_done_err(&pxmitbuf->sctx,
		purb->status ? RTW_SCTX_DONE_WRITE_PORT_ERR : RTW_SCTX_DONE_SUCCESS);
	_exit_critical(&pxmitpriv->lock_sctx, &irqL);

	rtw_free_xmitbuf(pxmitpriv, pxmitbuf);

	//if(rtw_txframes_pending(padapter))	
	{
		tasklet_hi_schedule(&pxmitpriv->xmit_tasklet);
	}
	
_func_exit_;	

}

开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:101，代码来源:usb_ops_linux.c

注：本文中的rtw_get_current_time函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtw_get_stainfo函数代码示例发布时间：2022-05-30

C++ rtw_free_xmitframe函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17957|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8509|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9304|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7808|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ rtw_get_current_time函数代码示例

示例1: rtw_get_passing_time_ms

示例2: sreset_reset

示例3: rtw_ips_pwr_down

示例4: rtw_ips_pwr_up

示例5: rtw_ips_pwr_down

示例6: rtl8723a_sreset_xmit_status_check

示例7: PS_RDY_CHECK

示例8: rtw_hal_read_chip_info

示例9: _rtw_mi_busy_traffic_check

示例10: rtl8723b_sreset_xmit_status_check

示例11: sreset_reset

示例12: rtw_lps_leave

示例13: rtw_handle_tkip_countermeasure

示例14: rtl8192c_sreset_xmit_status_check

示例15: rtw_resume_process

示例16: rtw_gspi_suspend

示例17: rtw_set_802_11_ssid

示例18: rtw_set_802_11_bssid

示例19: usb_write_port

示例20: usb_write_port_complete

请发表评论

全部评论

上一篇：

下一篇：

MATLAB入门（一）

librespeed/speedtest: Self-hosted Speedt

CVE-2022-36948

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053