• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ rtw_get_stainfo函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中rtw_get_stainfo函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_get_stainfo函数的具体用法？C++ rtw_get_stainfo怎么用？C++ rtw_get_stainfo使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了rtw_get_stainfo函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtw_get_stainfo

struct sta_info *rtw_get_bcmc_stainfo(struct adapter *padapter)
{
	struct sta_priv *pstapriv = &padapter->stapriv;
	u8 bc_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};

	return rtw_get_stainfo(pstapriv, bc_addr);
}
开发者ID:Lyude，项目名称:linux，代码行数:7，代码来源:rtw_sta_mgt.c


示例2: rtw_setassocsta_cmdrsp_callback

void rtw_setassocsta_cmdrsp_callback(struct adapter *padapter,  struct cmd_obj *pcmd)
{
	struct sta_priv *pstapriv = &padapter->stapriv;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
	struct set_assocsta_parm *passocsta_parm = (struct set_assocsta_parm *)(pcmd->parmbuf);
	struct set_assocsta_rsp *passocsta_rsp = (struct set_assocsta_rsp *)(pcmd->rsp);
	struct sta_info *psta = rtw_get_stainfo(pstapriv, passocsta_parm->addr);


	if (psta == NULL) {
		RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nERROR: setassocsta_cmdrsp_callbac => can't get sta_info\n\n"));
		goto exit;
	}

	psta->aid = passocsta_rsp->cam_id;
	psta->mac_id = passocsta_rsp->cam_id;

	spin_lock_bh(&pmlmepriv->lock);

	if ((check_fwstate(pmlmepriv, WIFI_MP_STATE) == true) && (check_fwstate(pmlmepriv, _FW_UNDER_LINKING) == true))
		_clr_fwstate_(pmlmepriv, _FW_UNDER_LINKING);

	set_fwstate(pmlmepriv, _FW_LINKED);
	spin_unlock_bh(&pmlmepriv->lock);

exit:
	rtw_free_cmd_obj(pcmd);

}
开发者ID:020gzh，项目名称:linux，代码行数:29，代码来源:rtw_cmd.c


示例3: rtl8723b_hal_dm_in_lps

void rtl8723b_hal_dm_in_lps(PADAPTER padapter)
{
	u32	PWDB_rssi=0;	
	struct mlme_priv 	*pmlmepriv = &padapter->mlmepriv;
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(padapter);
	PDM_ODM_T		pDM_Odm = &pHalData->odmpriv;
	pDIG_T	pDM_DigTable = &pDM_Odm->DM_DigTable;
	struct sta_priv *pstapriv = &padapter->stapriv;
	struct sta_info *psta = NULL;

	DBG_871X("%s, RSSI_Min=%d\n", __func__, pDM_Odm->RSSI_Min);

	//update IGI
	ODM_Write_DIG(pDM_Odm, pDM_Odm->RSSI_Min);


	//set rssi to fw
	psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));
	if(psta && (psta->rssi_stat.UndecoratedSmoothedPWDB > 0))
	{
		PWDB_rssi = (psta->mac_id | (psta->rssi_stat.UndecoratedSmoothedPWDB<<16) );
		
		rtl8723b_set_rssi_cmd(padapter, (u8*)&PWDB_rssi);
	}	

}
开发者ID:NextThingCo，项目名称:RTL8723BS，代码行数:26，代码来源:rtl8723b_dm.c


示例4: rtl8723b_HalDmWatchDog_in_LPS

void rtl8723b_HalDmWatchDog_in_LPS(IN	PADAPTER	Adapter)
{
	u8	bLinked =false;
	PHAL_DATA_TYPE	pHalData = GET_HAL_DATA(Adapter);
	struct mlme_priv	*pmlmepriv = &Adapter->mlmepriv;
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	PDM_ODM_T		pDM_Odm = &pHalData->odmpriv;
	pDIG_T	pDM_DigTable = &pDM_Odm->DM_DigTable;
	struct sta_priv *pstapriv = &Adapter->stapriv;
	struct sta_info *psta = NULL;

	if (Adapter->hw_init_completed == false)
		goto skip_lps_dm;


	if (rtw_linked_check(Adapter))
		bLinked = true;

	ODM_CmnInfoUpdate(&pHalData->odmpriv , ODM_CMNINFO_LINK, bLinked);

	if (bLinked == false)
		goto skip_lps_dm;

	if (!(pDM_Odm->SupportAbility & ODM_BB_RSSI_MONITOR))
		goto skip_lps_dm;


	/* ODM_DMWatchdog(&pHalData->odmpriv); */
	/* Do DIG by RSSI In LPS-32K */

      /* 1 Find MIN-RSSI */
	psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));
	if (psta == NULL)
		goto skip_lps_dm;

	pdmpriv->EntryMinUndecoratedSmoothedPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB;

	DBG_871X("CurIGValue =%d, EntryMinUndecoratedSmoothedPWDB = %d\n", pDM_DigTable->CurIGValue, pdmpriv->EntryMinUndecoratedSmoothedPWDB);

	if (pdmpriv->EntryMinUndecoratedSmoothedPWDB <=0)
		goto skip_lps_dm;

	pdmpriv->MinUndecoratedPWDBForDM = pdmpriv->EntryMinUndecoratedSmoothedPWDB;

	pDM_Odm->RSSI_Min = pdmpriv->MinUndecoratedPWDBForDM;

	/* if (pDM_DigTable->CurIGValue != pDM_Odm->RSSI_Min) */
	if ((pDM_DigTable->CurIGValue > pDM_Odm->RSSI_Min + 5) ||
             (pDM_DigTable->CurIGValue < pDM_Odm->RSSI_Min - 5))

	{
		rtw_dm_in_lps_wk_cmd(Adapter);
	}


skip_lps_dm:

	return;

}
开发者ID:jasonabele，项目名称:rtl8723bs，代码行数:60，代码来源:rtl8723b_dm.c


示例5: sreset_restore_security_station

void sreset_restore_security_station(_adapter *padapter)
{
	u8 EntryId = 0;
	struct mlme_priv *mlmepriv = &padapter->mlmepriv;
	struct sta_priv * pstapriv = &padapter->stapriv;
	struct sta_info *psta;
	struct security_priv* psecuritypriv=&(padapter->securitypriv);
	struct mlme_ext_info	*pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;

	{
		u8 val8;

		if (pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X) {
			val8 = 0xcc;
		#ifdef CONFIG_WAPI_SUPPORT
		} else if (padapter->wapiInfo.bWapiEnable && pmlmeinfo->auth_algo == dot11AuthAlgrthm_WAPI) {
			//Disable TxUseDefaultKey, RxUseDefaultKey, RxBroadcastUseDefaultKey.
			val8 = 0x4c;
		#endif
		} else {
			val8 = 0xcf;
		}
		rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
	}

	#if 0
	if (	( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP40_ ) ||
		( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP104_ ))
	{

		for(EntryId=0; EntryId<4; EntryId++)
		{
			if(EntryId == psecuritypriv->dot11PrivacyKeyIndex)
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 1);
			else
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 0);
		}

	}
	else
	#endif
	if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) ||
		(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_))
	{
		psta = rtw_get_stainfo(pstapriv, get_bssid(mlmepriv));
		if (psta == NULL) {
			//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
		}
		else
		{
			//pairwise key
			rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
			//group key
			rtw_set_key(padapter,&padapter->securitypriv,padapter->securitypriv.dot118021XGrpKeyid, 0);
		}
	}
}
开发者ID:GREYFOXRGR，项目名称:BPI-M3-bsp，代码行数:57，代码来源:rtw_sreset.c


示例6: rtw_get_bcmc_stainfo

struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter)
{
	struct sta_info		*psta;
	struct sta_priv		*pstapriv = &padapter->stapriv;
	u8 bc_addr[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
_func_enter_;
	 psta = rtw_get_stainfo(pstapriv, bc_addr);
_func_exit_;
	return psta;

}
开发者ID:morphis，项目名称:rtl8188eu，代码行数:11，代码来源:rtw_sta_mgt.c


示例7: GetHalDefVar

u8 GetHalDefVar(
	struct adapter *adapter, enum HAL_DEF_VARIABLE variable, void *value
)
{
	struct hal_com_data *hal_data = GET_HAL_DATA(adapter);
	DM_ODM_T *odm = &(hal_data->odmpriv);
	u8 bResult = _SUCCESS;

	switch (variable) {
	case HAL_DEF_UNDERCORATEDSMOOTHEDPWDB:
		{
			struct mlme_priv *pmlmepriv;
			struct sta_priv *pstapriv;
			struct sta_info *psta;

			pmlmepriv = &adapter->mlmepriv;
			pstapriv = &adapter->stapriv;
			psta = rtw_get_stainfo(pstapriv, pmlmepriv->cur_network.network.MacAddress);
			if (psta)
				*((int *)value) = psta->rssi_stat.UndecoratedSmoothedPWDB;
		}
		break;
	case HW_DEF_ODM_DBG_FLAG:
		*((u64 *)value) = odm->DebugComponents;
		break;
	case HW_DEF_ODM_DBG_LEVEL:
		*((u32 *)value) = odm->DebugLevel;
		break;
	case HAL_DEF_DBG_DM_FUNC:
		*((u32 *)value) = hal_data->odmpriv.SupportAbility;
		break;
	case HAL_DEF_DBG_DUMP_RXPKT:
		*((u8 *)value) = hal_data->bDumpRxPkt;
		break;
	case HAL_DEF_DBG_DUMP_TXPKT:
		*((u8 *)value) = hal_data->bDumpTxPkt;
		break;
	case HAL_DEF_ANT_DETECT:
		*((u8 *)value) = hal_data->AntDetection;
		break;
	case HAL_DEF_MACID_SLEEP:
		*(u8 *)value = false;
		break;
	case HAL_DEF_TX_PAGE_SIZE:
		*((u32 *)value) = PAGE_SIZE_128;
		break;
	default:
		DBG_871X_LEVEL(_drv_always_, "%s: [WARNING] HAL_DEF_VARIABLE(%d) not defined!\n", __func__, variable);
		bResult = _FAIL;
		break;
	}

	return bResult;
}
开发者ID:grate-driver，项目名称:linux，代码行数:54，代码来源:hal_com.c


示例8: rtw_set_802_11_remove_key

u8 rtw_set_802_11_remove_key(_adapter*	padapter, NDIS_802_11_REMOVE_KEY *key){
	
	uint				encryptionalgo;
	u8 * pbssid;
	struct sta_info *stainfo;
	u8	bgroup = (key->KeyIndex & 0x4000000) > 0 ? _FALSE: _TRUE;
	u8	keyIndex = (u8)key->KeyIndex & 0x03;
	u8	ret=_SUCCESS;
	
_func_enter_;

	if ((key->KeyIndex & 0xbffffffc) > 0) {
		ret=_FAIL;
		goto exit;
	}

	if (bgroup == _TRUE) {
		encryptionalgo= padapter->securitypriv.dot118021XGrpPrivacy;
		// clear group key by index
		//NdisZeroMemory(Adapter->MgntInfo.SecurityInfo.KeyBuf[keyIndex], MAX_WEP_KEY_LEN);
		//Adapter->MgntInfo.SecurityInfo.KeyLen[keyIndex] = 0;
		
		_rtw_memset(&padapter->securitypriv.dot118021XGrpKey[keyIndex], 0, 16);
		
		//! \todo Send a H2C Command to Firmware for removing this Key in CAM Entry.
	
	} else {
	
		pbssid=get_bssid(&padapter->mlmepriv);
		stainfo=rtw_get_stainfo(&padapter->stapriv , pbssid );
		if(stainfo !=NULL){
			encryptionalgo=stainfo->dot118021XPrivacy;

		// clear key by BSSID
		_rtw_memset(&stainfo->dot118021x_UncstKey, 0, 16);
		
		//! \todo Send a H2C Command to Firmware for disable this Key in CAM Entry.

		}
		else{
			ret= _FAIL;
			goto exit;
		}
	}

exit:
	
_func_exit_;

	return _TRUE;
	
}
开发者ID:digetx，项目名称:rtl8192cu-fixes，代码行数:52，代码来源:rtw_ioctl_set.c


示例9: rtw_setstaKey_cmdrsp_callback

void rtw_setstaKey_cmdrsp_callback(struct adapter *padapter,  struct cmd_obj *pcmd)
{
	struct sta_priv *pstapriv = &padapter->stapriv;
	struct set_stakey_rsp *psetstakey_rsp = (struct set_stakey_rsp *)(pcmd->rsp);
	struct sta_info *psta = rtw_get_stainfo(pstapriv, psetstakey_rsp->addr);

	if (!psta) {
		RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("\nERROR: %s => can't get sta_info\n\n", __func__));
		goto exit;
	}
exit:
	rtw_free_cmd_obj(pcmd);
}
开发者ID:avagin，项目名称:linux，代码行数:13，代码来源:rtw_cmd.c


示例10: rtw_btcoex_RejectApAggregatedPacket

// ==================================================
// Below Functions are called by BT-Coex
// ==================================================
void rtw_btcoex_RejectApAggregatedPacket(PADAPTER padapter, u8 enable)
{
	struct mlme_ext_info *pmlmeinfo;

	pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;

	if (_TRUE == enable)
	{
		struct sta_info *psta = NULL;

		pmlmeinfo->bAcceptAddbaReq = _FALSE;

		if ((pmlmeinfo->state & 0x03) == WIFI_FW_STATION_STATE) {
			psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv));
			if (psta)
				send_delba(padapter, 0, psta->hwaddr);
		} else if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
			_irqL irqL;
			_list *phead, *plist;
			u8 peer_num = 0;
			char peers[NUM_STA];
			struct sta_priv *pstapriv = &padapter->stapriv;
			int i;

			_enter_critical_bh(&pstapriv->asoc_list_lock, &irqL);

			phead = &pstapriv->asoc_list;
			plist = get_next(phead);

			while ((rtw_end_of_queue_search(phead, plist)) == _FALSE) {
				int stainfo_offset;
				
				psta = LIST_CONTAINOR(plist, struct sta_info, asoc_list);
				plist = get_next(plist);

				stainfo_offset = rtw_stainfo_offset(pstapriv, psta);
				if (stainfo_offset_valid(stainfo_offset))
					peers[peer_num++] = stainfo_offset;
			}
	
			_exit_critical_bh(&pstapriv->asoc_list_lock, &irqL);

			if (peer_num) {
				for (i = 0; i < peer_num; i++) {
					psta = rtw_get_stainfo_by_offset(pstapriv, peers[i]);
					if (psta)
						send_delba(padapter, 0, psta->hwaddr);
				}
			}
		}
	}
开发者ID:Carlstark，项目名称:RaspberryPi2，代码行数:54，代码来源:rtw_btcoex.c


示例11: proc_get_ap_info

int proc_get_ap_info(struct seq_file *m, void *v)
{
	struct net_device *dev = m->private;
	struct sta_info *psta;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
	struct wlan_network *cur_network = &(pmlmepriv->cur_network);
	struct sta_priv *pstapriv = &padapter->stapriv;

	psta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress);
	if(psta)
	{
		int i;
		struct recv_reorder_ctrl *preorder_ctrl;
					
		DBG_871X_SEL_NL(m, "SSID=%s\n", cur_network->network.Ssid.Ssid);		
		DBG_871X_SEL_NL(m, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
		DBG_871X_SEL_NL(m, "cur_channel=%d, cur_bwmode=%d, cur_ch_offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset);		
		DBG_871X_SEL_NL(m, "wireless_mode=0x%x, rtsen=%d, cts2slef=%d\n", psta->wireless_mode, psta->rtsen, psta->cts2self);
		DBG_871X_SEL_NL(m, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);
#ifdef CONFIG_80211N_HT
		DBG_871X_SEL_NL(m, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);		
		DBG_871X_SEL_NL(m, "bwmode=%d, ch_offset=%d, sgi_20m=%d,sgi_40m=%d\n", psta->bw_mode, psta->htpriv.ch_offset, psta->htpriv.sgi_20m, psta->htpriv.sgi_40m);
		DBG_871X_SEL_NL(m, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable);	
		DBG_871X_SEL_NL(m, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
		DBG_871X_SEL_NL(m, "ldpc_cap=0x%x, stbc_cap=0x%x, beamform_cap=0x%x\n", psta->htpriv.ldpc_cap, psta->htpriv.stbc_cap, psta->htpriv.beamform_cap);
#endif //CONFIG_80211N_HT
#ifdef CONFIG_80211AC_VHT
		DBG_871X_SEL_NL(m, "vht_en=%d, vht_sgi_80m=%d\n", psta->vhtpriv.vht_option, psta->vhtpriv.sgi_80m);
		DBG_871X_SEL_NL(m, "vht_ldpc_cap=0x%x, vht_stbc_cap=0x%x, vht_beamform_cap=0x%x\n", psta->vhtpriv.ldpc_cap, psta->vhtpriv.stbc_cap, psta->vhtpriv.beamform_cap);
		DBG_871X_SEL_NL(m, "vht_mcs_map=0x%x, vht_highest_rate=0x%x, vht_ampdu_len=%d\n", *(u16*)psta->vhtpriv.vht_mcs_map, psta->vhtpriv.vht_highest_rate, psta->vhtpriv.ampdu_len);
#endif
					
		for(i=0;i<16;i++)
		{							
			preorder_ctrl = &psta->recvreorder_ctrl[i];
			if(preorder_ctrl->enable)
			{
				DBG_871X_SEL_NL(m, "tid=%d, indicate_seq=%d\n", i, preorder_ctrl->indicate_seq);
			}
		}	
							
	}
	else
	{							
		DBG_871X_SEL_NL(m, "can't get sta's macaddr, cur_network's macaddr:" MAC_FMT "\n", MAC_ARG(cur_network->network.MacAddress));
	}

	return 0;
}
开发者ID:NotKit，项目名称:android-ia_kernel_intel_baytrail，代码行数:51，代码来源:rtw_debug.c


示例12: proc_get_ap_info

int proc_get_ap_info(char *page, char **start,
			  off_t offset, int count,
			  int *eof, void *data)
{
	struct sta_info *psta;
	struct net_device *dev = data;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
	struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
	struct wlan_network *cur_network = &(pmlmepriv->cur_network);
	struct sta_priv *pstapriv = &padapter->stapriv;
	int len = 0;

	psta = rtw_get_stainfo(pstapriv, cur_network->network.MacAddress);
	if(psta)
	{
		int i;
		struct recv_reorder_ctrl *preorder_ctrl;

		len += snprintf(page + len, count - len, "SSID=%s\n", cur_network->network.Ssid.Ssid);
		len += snprintf(page + len, count - len, "sta's macaddr:" MAC_FMT "\n", MAC_ARG(psta->hwaddr));
		len += snprintf(page + len, count - len, "cur_channel=%d, cur_bwmode=%d, cur_ch_offset=%d\n", pmlmeext->cur_channel, pmlmeext->cur_bwmode, pmlmeext->cur_ch_offset);
		len += snprintf(page + len, count - len, "rtsen=%d, cts2slef=%d\n", psta->rtsen, psta->cts2self);
		len += snprintf(page + len, count - len, "state=0x%x, aid=%d, macid=%d, raid=%d\n", psta->state, psta->aid, psta->mac_id, psta->raid);
#ifdef CONFIG_80211N_HT
		len += snprintf(page + len, count - len, "qos_en=%d, ht_en=%d, init_rate=%d\n", psta->qos_option, psta->htpriv.ht_option, psta->init_rate);
		len += snprintf(page + len, count - len, "bwmode=%d, ch_offset=%d, sgi=%d\n", psta->htpriv.bwmode, psta->htpriv.ch_offset, psta->htpriv.sgi);
		len += snprintf(page + len, count - len, "ampdu_enable = %d\n", psta->htpriv.ampdu_enable);
		len += snprintf(page + len, count - len, "agg_enable_bitmap=%x, candidate_tid_bitmap=%x\n", psta->htpriv.agg_enable_bitmap, psta->htpriv.candidate_tid_bitmap);
#endif //CONFIG_80211N_HT

		for(i=0;i<16;i++)
		{
			preorder_ctrl = &psta->recvreorder_ctrl[i];
			if(preorder_ctrl->enable)
			{
				len += snprintf(page + len, count - len, "tid=%d, indicate_seq=%d\n", i, preorder_ctrl->indicate_seq);
			}
		}

	}
	else
	{
		len += snprintf(page + len, count - len, "can't get sta's macaddr, cur_network's macaddr:" MAC_FMT "\n", MAC_ARG(cur_network->network.MacAddress));
	}

	*eof = 1;
	return len;

}
开发者ID:rtaubes，项目名称:dwa_171，代码行数:50，代码来源:rtw_debug.c


示例13: rtw_btcoex_RejectApAggregatedPacket

/*  ================================================== */
void rtw_btcoex_RejectApAggregatedPacket(struct adapter *padapter, u8 enable)
{
	struct mlme_ext_info *pmlmeinfo;
	struct sta_info *psta;

	pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;
	psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv));

	if (true == enable) {
		pmlmeinfo->bAcceptAddbaReq = false;
		if (psta)
			send_delba(padapter, 0, psta->hwaddr);
	} else{
		pmlmeinfo->bAcceptAddbaReq = true;
	}
}
开发者ID:mkrufky，项目名称:linux，代码行数:17，代码来源:rtw_btcoex.c


示例14: rtw_get_cur_max_rate

/*
* rtw_get_cur_max_rate - 
* @adapter: pointer to _adapter structure
* 
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(_adapter *adapter)
{
	int	i = 0;
	u16	rate = 0, max_rate = 0;
	struct mlme_priv	*pmlmepriv = &adapter->mlmepriv;
	WLAN_BSSID_EX	*pcur_bss = &pmlmepriv->cur_network.network;
	struct sta_info *psta = NULL;
	u8	short_GI=0;
#ifdef CONFIG_80211N_HT
	u8	rf_type = 0;
#endif

#ifdef CONFIG_MP_INCLUDED
	if (adapter->registrypriv.mp_mode == 1)
	{	
		if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
			return 0;
	}
#endif

	if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE) 
		&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE))
		return 0;

	psta = rtw_get_stainfo(&adapter->stapriv, get_bssid(pmlmepriv));
	if (psta == NULL)
		return 0;

	short_GI = query_ra_short_GI(psta);

#ifdef CONFIG_80211N_HT
	if (IsSupportedHT(psta->wireless_mode)) {
		rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));

		max_rate = rtw_mcs_rate(
			rf_type,
			((psta->bw_mode == CHANNEL_WIDTH_40)?1:0),
			short_GI,
			psta->htpriv.ht_cap.supp_mcs_set
		);
	}
#ifdef CONFIG_80211AC_VHT
	else if (IsSupportedVHT(psta->wireless_mode)) {
		max_rate = ((rtw_vht_mcs_to_data_rate(psta->bw_mode, short_GI, pmlmepriv->vhtpriv.vht_highest_rate) + 1) >> 1) * 10;
	}
开发者ID:AOSC-Dev，项目名称:aosc-os-armel-sunxi-boot，代码行数:51，代码来源:rtw_ioctl_set.c


示例15: rtw_get_cur_max_rate

/*
* rtw_get_cur_max_rate -
* @adapter: pointer to _adapter structure
*
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(_adapter *adapter)
{
	int	i = 0;
	u16	rate = 0, max_rate = 0;
	struct mlme_priv	*pmlmepriv = &adapter->mlmepriv;
	WLAN_BSSID_EX	*pcur_bss = &pmlmepriv->cur_network.network;
	struct sta_info *psta = NULL;
	u8	short_GI=0;
	u8	rf_type = 0;

	if((check_fwstate(pmlmepriv, _FW_LINKED) != true)
		&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != true))
		return 0;

	psta = rtw_get_stainfo(&adapter->stapriv, get_bssid(pmlmepriv));
	if (psta == NULL)
		return 0;

	short_GI = query_ra_short_GI(psta);

	if (IsSupportedHT(psta->wireless_mode)) {
		rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));

		max_rate = rtw_mcs_rate(
			rf_type,
			((psta->bw_mode == CHANNEL_WIDTH_40)?1:0),
			short_GI,
			psta->htpriv.ht_cap.supp_mcs_set
		);
	}
	else
	{
		while( (pcur_bss->SupportedRates[i]!=0) && (pcur_bss->SupportedRates[i]!=0xFF))
		{
			rate = pcur_bss->SupportedRates[i]&0x7F;
			if(rate>max_rate)
				max_rate = rate;
			i++;
		}

		max_rate = max_rate*10/2;
	}

	return max_rate;
}
开发者ID:jozzse，项目名称:rtl8723bs，代码行数:51，代码来源:rtw_ioctl_set.c


示例16: rtw_gtk_offload

int rtw_gtk_offload(struct net_device *net, u8 *cmd_ptr)
{
	int i;
	//u8 *cmd_ptr = priv_cmd.buf;
	struct sta_info * psta;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(net);
	struct mlme_priv 	*pmlmepriv = &padapter->mlmepriv;
	struct sta_priv *pstapriv = &padapter->stapriv;
	struct security_priv* psecuritypriv=&(padapter->securitypriv);
	psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));
	
	
	if (psta == NULL) 
	{
		DBG_8192C("%s, : Obtain Sta_info fail \n", __func__);
	}
	else
	{
		//string command length of "GTK_REKEY_OFFLOAD"
		cmd_ptr += 18;
		
		_rtw_memcpy(psta->kek, cmd_ptr, RTW_KEK_LEN);
		cmd_ptr += RTW_KEK_LEN;
		/*
		printk("supplicant KEK: ");
		for(i=0;i<RTW_KEK_LEN; i++)
			printk(" %02x ", psta->kek[i]);
		printk("\n supplicant KCK: ");
		*/
		_rtw_memcpy(psta->kck, cmd_ptr, RTW_KCK_LEN);
		cmd_ptr += RTW_KCK_LEN;
		/*
		for(i=0;i<RTW_KEK_LEN; i++)
			printk(" %02x ", psta->kck[i]);
		*/
		_rtw_memcpy(psta->replay_ctr, cmd_ptr, RTW_REPLAY_CTR_LEN);
		psecuritypriv->binstallKCK_KEK = _TRUE;
		
		//printk("\nREPLAY_CTR: ");
		//for(i=0;i<RTW_REPLAY_CTR_LEN; i++)
			//printk(" %02x ", psta->replay_ctr[i]);
	}

	return _SUCCESS;
}
开发者ID:AustinKwang，项目名称:rtl8192eu，代码行数:45，代码来源:rtw_android.c


示例17: rtw_btcoex_RejectApAggregatedPacket

// ==================================================
// Below Functions are called by BT-Coex
// ==================================================
void rtw_btcoex_RejectApAggregatedPacket(PADAPTER padapter, u8 enable)
{
	struct mlme_ext_info *pmlmeinfo;
	struct sta_info *psta;

	pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;
	psta = rtw_get_stainfo(&padapter->stapriv, get_bssid(&padapter->mlmepriv));

	if (_TRUE == enable)
	{
		pmlmeinfo->bAcceptAddbaReq = _FALSE;
		send_delba(padapter, 0, psta->hwaddr);
	}
	else
	{
		pmlmeinfo->bAcceptAddbaReq = _TRUE;
	}
}
开发者ID:1fans，项目名称:rtl8192eu-linux-driver，代码行数:21，代码来源:rtw_btcoex.c


示例18: _restore_security_setting

static void _restore_security_setting(_adapter *padapter)
{
	u8 EntryId = 0;
	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;	
	struct sta_priv * pstapriv = &padapter->stapriv;
	struct sta_info *psta;
	struct security_priv* psecuritypriv=&(padapter->securitypriv);	
	struct mlme_ext_info	*pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;

	(pmlmeinfo->auth_algo == dot11AuthAlgrthm_8021X)
		? rtw_write8(padapter, REG_SECCFG, 0xcc)
		: rtw_write8(padapter, REG_SECCFG, 0xcf);
	
	if (	( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP40_ ) ||
		( padapter->securitypriv.dot11PrivacyAlgrthm == _WEP104_ ))		
	{

		for(EntryId=0; EntryId<4; EntryId++)
		{
			if(EntryId == psecuritypriv->dot11PrivacyKeyIndex)
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 1);
			else
				rtw_set_key(padapter,&padapter->securitypriv, EntryId, 0);
		}	

	}
	else if((padapter->securitypriv.dot11PrivacyAlgrthm == _TKIP_) ||
		(padapter->securitypriv.dot11PrivacyAlgrthm == _AES_))
	{
		psta = rtw_get_stainfo(pstapriv, get_bssid(pmlmepriv));				
		if (psta == NULL) {
			//DEBUG_ERR( ("Set wpa_set_encryption: Obtain Sta_info fail \n"));
		}
		else
		{			
			//pairwise key
			rtw_setstakey_cmd(padapter, (unsigned char *)psta, _TRUE);
			//group key			
			rtw_set_key(padapter,&padapter->securitypriv,padapter->securitypriv.dot118021XGrpKeyid, 0);
		}
	}
	
}
开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:43，代码来源:rtl8192c_sreset.c


示例19: rtw_hal_mgnt_xmit

/*
 * [IMPORTANT] This function would be run in interrupt context.
 */
s32	rtw_hal_mgnt_xmit(_adapter *padapter, struct xmit_frame *pmgntframe)
{
	s32 ret = _FAIL;
	u8	*pframe, subtype;
	struct rtw_ieee80211_hdr	*pwlanhdr;
	struct sta_info	*psta;
	struct sta_priv		*pstapriv = &padapter->stapriv;
	
	update_mgntframe_attrib_addr(padapter, pmgntframe);
	pframe = (u8 *)(pmgntframe->buf_addr) + TXDESC_OFFSET;
	subtype = GetFrameSubType(pframe); /* bit(7)~bit(2) */
	
	//pwlanhdr = (struct rtw_ieee80211_hdr *)pframe;
	//_rtw_memcpy(pmgntframe->attrib.ra, pwlanhdr->addr1, ETH_ALEN);

#ifdef CONFIG_IEEE80211W
	if (padapter->securitypriv.binstallBIPkey == _TRUE && (subtype == WIFI_DEAUTH || subtype == WIFI_DISASSOC ||
			subtype == WIFI_ACTION))
	{
		if (IS_MCAST(pmgntframe->attrib.ra) && pmgntframe->attrib.key_type != IEEE80211W_NO_KEY) {
			pmgntframe->attrib.encrypt = _BIP_;
			/* pmgntframe->attrib.bswenc = _TRUE; */
		} else if (pmgntframe->attrib.key_type != IEEE80211W_NO_KEY) {
			psta = rtw_get_stainfo(pstapriv, pmgntframe->attrib.ra);
			if (psta && psta->bpairwise_key_installed == _TRUE) {
				pmgntframe->attrib.encrypt = _AES_;
				pmgntframe->attrib.bswenc = _TRUE;
			} else {
				DBG_871X("%s, %d, bpairwise_key_installed is FALSE\n", __func__, __LINE__);
				goto no_mgmt_coalesce;
			}
		}
		DBG_871X("encrypt=%d, bswenc=%d\n", pmgntframe->attrib.encrypt, pmgntframe->attrib.bswenc);
		rtw_mgmt_xmitframe_coalesce(padapter, pmgntframe->pkt, pmgntframe);
	}
#endif //CONFIG_IEEE80211W
no_mgmt_coalesce:
	ret = padapter->HalFunc.mgnt_xmit(padapter, pmgntframe);
	return ret;
}
开发者ID:ConiKost，项目名称:rtl88XXAU，代码行数:43，代码来源:hal_intf.c


示例20: rtw_set_802_11_remove_key

u8 rtw_set_802_11_remove_key(_adapter*	padapter, NDIS_802_11_REMOVE_KEY *key){

	u8 *pbssid;
	struct sta_info *stainfo;
	u8	bgroup = (key->KeyIndex & 0x4000000) > 0 ? false: true;
	u8	keyIndex = (u8)key->KeyIndex & 0x03;
	u8	ret=_SUCCESS;

_func_enter_;

	if ((key->KeyIndex & 0xbffffffc) > 0) {
		ret=_FAIL;
		goto exit;
	}

	if (bgroup == true) {
		/*  clear group key by index */

		_rtw_memset(&padapter->securitypriv.dot118021XGrpKey[keyIndex], 0, 16);

		/*  \todo Send a H2C Command to Firmware for removing this Key in CAM Entry. */
	} else {
		pbssid=get_bssid(&padapter->mlmepriv);
		stainfo=rtw_get_stainfo(&padapter->stapriv , pbssid );
		if (stainfo) {
			/*  clear key by BSSID */
			_rtw_memset(&stainfo->dot118021x_UncstKey, 0, 16);

			/*  \todo Send a H2C Command to Firmware for disable this Key in CAM Entry. */
		} else {
			ret= _FAIL;
			goto exit;
		}
	}
exit:

_func_exit_;
	return ret;
}
开发者ID:tivolist，项目名称:rtl8188eu，代码行数:39，代码来源:rtw_ioctl_set.c



注：本文中的rtw_get_stainfo函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ rtw_hal_set_hwreg函数代码示例发布时间：2022-05-30
下一篇：
C++ rtw_get_current_time函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap