C++ sbus_readl函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sbus_readl函数的典型用法代码示例。如果您正苦于以下问题：C++ sbus_readl函数的具体用法？C++ sbus_readl怎么用？C++ sbus_readl使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sbus_readl函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: bigmac_rx_reset

static void bigmac_rx_reset(void __iomem *bregs)
{
	int tries = RX_RESET_TRIES;

	sbus_writel(0, bregs + BMAC_RXCFG);
	while (sbus_readl(bregs + BMAC_RXCFG) && --tries)
		udelay(20);

	if (!tries) {
		printk(KERN_ERR "BIGMAC: Receiver will not reset.\n");
		printk(KERN_ERR "BIGMAC: rx_cfg is %08x\n",
		       sbus_readl(bregs + BMAC_RXCFG));
	}
}

开发者ID:0xroot，项目名称:Blackphone-BP1-Kernel，代码行数:14，代码来源:sunbmac.c

示例2: sun4m_nmi

void sun4m_nmi(struct pt_regs *regs)
{
    unsigned long afsr, afar, si;

    printk(KERN_ERR "Aieee: sun4m NMI received!\n");
    /* XXX HyperSparc hack XXX */
    __asm__ __volatile__("mov 0x500, %%g1\n\t"
                         "lda [%%g1] 0x4, %0\n\t"
                         "mov 0x600, %%g1\n\t"
                         "lda [%%g1] 0x4, %1\n\t" :
                         "=r" (afsr), "=r" (afar));
    printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
    si = sbus_readl(&sun4m_irq_global->pending);
    printk(KERN_ERR "si=%08lx\n", si);
    if (si & SUN4M_INT_MODULE_ERR)
        printk(KERN_ERR "Module async error\n");
    if (si & SUN4M_INT_M2S_WRITE_ERR)
        printk(KERN_ERR "MBus/SBus async error\n");
    if (si & SUN4M_INT_ECC_ERR)
        printk(KERN_ERR "ECC memory error\n");
    if (si & SUN4M_INT_VME_ERR)
        printk(KERN_ERR "VME async error\n");
    printk(KERN_ERR "you lose buddy boy...\n");
    show_regs(regs);
    prom_halt();
}

开发者ID:openube，项目名称:android_kernel_sony_c2305，代码行数:26，代码来源:sun4m_irq.c

示例3: leo_clear

static void leo_clear(struct vc_data *conp, struct display *p, int sy, int sx,
		      int height, int width)
{
	struct fb_info_sbusfb *fb = (struct fb_info_sbusfb *)p->fb_info;
	register struct leo_lc_ss0_usr *us = fb->s.leo.lc_ss0_usr;
	register struct leo_ld *ss = (struct leo_ld *) fb->s.leo.ld_ss0;
	unsigned long flags;
	int x, y, w, h;
	int i;

	spin_lock_irqsave(&fb->lock, flags);
	do {
		i = sbus_readl(&us->csr);
	} while (i & 0x20000000);
	sbus_writel((attr_bgcol_ec(p,conp)<<24), &ss->fg);
	if (fontheightlog(p)) {
		y = sy << fontheightlog(p); h = height << fontheightlog(p);
	} else {
		y = sy * fontheight(p); h = height * fontheight(p);
	}
	if (fontwidthlog(p)) {
		x = sx << fontwidthlog(p); w = width << fontwidthlog(p);
	} else {
		x = sx * fontwidth(p); w = width * fontwidth(p);
	}
	sbus_writel((w - 1) | ((h - 1) << 11), &us->extent);
	sbus_writel((x + fb->x_margin) | ((y + fb->y_margin) << 11) | 0x80000000,
		    &us->fill);
	spin_unlock_irqrestore(&fb->lock, flags);
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:30，代码来源:leofb.c

示例4: leo_switch_from_graph

static void leo_switch_from_graph(struct fb_info *info)
{
	struct leo_par *par = (struct leo_par *) info->par;
	struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0;
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&par->lock, flags);

	par->extent = ((info->var.xres - 1) |
		       ((info->var.yres - 1) << 16));

	sbus_writel(0xffffffff, &ss->wid);
	sbus_writel(0xffff, &ss->wmask);
	sbus_writel(0, &ss->vclipmin);
	sbus_writel(par->extent, &ss->vclipmax);
	sbus_writel(0, &ss->fg);
	sbus_writel(0xff000000, &ss->planemask);
	sbus_writel(0x310850, &ss->rop);
	sbus_writel(0, &ss->widclip);
	sbus_writel((info->var.xres-1) | ((info->var.yres-1) << 11),
		    &par->lc_ss0_usr->extent);
	sbus_writel(4, &par->lc_ss0_usr->addrspace);
	sbus_writel(0x80000000, &par->lc_ss0_usr->fill);
	sbus_writel(0, &par->lc_ss0_usr->fontt);
	do {
		val = sbus_readl(&par->lc_ss0_usr->csr);
	} while (val & 0x20000000);

	spin_unlock_irqrestore(&par->lock, flags);
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:31，代码来源:leo.c

示例5: leo_loadcmap

static void leo_loadcmap (struct fb_info_sbusfb *fb, struct display *p, int index, int count)
{
        struct leo_lx_krn *lx_krn = fb->s.leo.lx_krn;
	unsigned long flags;
	u32 tmp;
	int i;
	
	spin_lock_irqsave(&fb->lock, flags);
	sbus_writel(LEO_KRN_TYPE_CLUT0, &lx_krn->krn_type);
	i = leo_wait (lx_krn);
	if (i)
		goto out;
	sbus_writel(LEO_KRN_TYPE_CLUTDATA, &lx_krn->krn_type);
	for (i = 0; i < 256; i++) {
		u32 val;

		val = fb->color_map CM(i,0) |
			(fb->color_map CM(i,1) << 8) |
			(fb->color_map CM(i,2) << 16);

		sbus_writel(val, &lx_krn->krn_value); /* Throw colors there :)) */
	}
	sbus_writel(LEO_KRN_TYPE_CLUT0, &lx_krn->krn_type);
	tmp = sbus_readl(&lx_krn->krn_csr);
	tmp |= (LEO_KRN_CSR_UNK|LEO_KRN_CSR_UNK2);
	sbus_writel(tmp, &lx_krn->krn_csr);
out:
	spin_unlock_irqrestore(&fb->lock, flags);
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:29，代码来源:leofb.c

示例6: myri_do_handshake

static int myri_do_handshake(struct myri_eth *mp)
{
	struct myri_shmem __iomem *shmem = mp->shmem;
	void __iomem *cregs = mp->cregs;
	struct myri_channel __iomem *chan = &shmem->channel;
	int tick 			= 0;

	DET(("myri_do_handshake: "));
	if (sbus_readl(&chan->state) == STATE_READY) {
		DET(("Already STATE_READY, failed.\n"));
		return -1;	/* We're hosed... */
	}

	myri_disable_irq(mp->lregs, cregs);

	while (tick++ < 25) {
		u32 softstate;

		/* Wake it up. */
		DET(("shakedown, CONTROL_WON, "));
		sbus_writel(1, &shmem->shakedown);
		sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL);

		softstate = sbus_readl(&chan->state);
		DET(("chanstate[%08x] ", softstate));
		if (softstate == STATE_READY) {
			DET(("wakeup successful, "));
			break;
		}

		if (softstate != STATE_WFN) {
			DET(("not WFN setting that, "));
			sbus_writel(STATE_WFN, &chan->state);
		}

		udelay(20);
	}

	myri_enable_irq(mp->lregs, cregs);

	if (tick > 25) {
		DET(("25 ticks we lose, failure.\n"));
		return -1;
	}
	DET(("success\n"));
	return 0;
}

开发者ID:nos1609，项目名称:Chrono_Kernel-1，代码行数:47，代码来源:myri_sbus.c

示例7: parport_sunbpp_disable_irq

static void parport_sunbpp_disable_irq(struct parport *p)
{
	struct bpp_regs *regs = (struct bpp_regs *)p->base;
	u32 tmp;

	tmp = sbus_readl(&regs->p_csr);
	tmp &= ~DMA_INT_ENAB;
	sbus_writel(tmp, &regs->p_csr);
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:9，代码来源:parport_sunbpp.c

示例8: leo_wait

static int leo_wait (struct leo_lx_krn *lx_krn)
{
	int i;
	
	for (i = 0; (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000; i++)
		udelay (1); /* Busy wait at most 0.3 sec */
	if (i == 300000)
		return -EFAULT; /* Timed out - should we print some message? */
	return 0;
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:10，代码来源:leofb.c

示例9: bigmac_tx_reset

static void bigmac_tx_reset(void __iomem *bregs)
{
	int tries = TX_RESET_TRIES;

	sbus_writel(0, bregs + BMAC_TXCFG);

	/* The fifo threshold bit is read-only and does
	 * not clear.  -DaveM
	 */
	while ((sbus_readl(bregs + BMAC_TXCFG) & ~(BIGMAC_TXCFG_FIFO)) != 0 &&
	       --tries != 0)
		udelay(20);

	if (!tries) {
		printk(KERN_ERR "BIGMAC: Transmitter will not reset.\n");
		printk(KERN_ERR "BIGMAC: tx_cfg is %08x\n",
		       sbus_readl(bregs + BMAC_TXCFG));
	}
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:19，代码来源:sunbmac.c

示例10: init_one_dvma

void __init init_one_dvma(struct sbus_dma *dma, int num_dma)
{
	printk("dma%d: ", num_dma);
	
	dma->next = 0;
	dma->running = 0;      /* No transfers going on as of yet */
	dma->allocated = 0;    /* No one has allocated us yet */
	switch(sbus_readl(dma->regs + DMA_CSR)&DMA_DEVICE_ID) {
	case DMA_VERS0:
		dma->revision = dvmarev0;
		printk("Revision 0 ");
		break;
	case DMA_ESCV1:
		dma->revision = dvmaesc1;
		printk("ESC Revision 1 ");
		break;
	case DMA_VERS1:
		dma->revision = dvmarev1;
		printk("Revision 1 ");
		break;
	case DMA_VERS2:
		dma->revision = dvmarev2;
		printk("Revision 2 ");
		break;
	case DMA_VERHME:
		dma->revision = dvmahme;
		printk("HME DVMA gate array ");
		break;
	case DMA_VERSPLUS:
		dma->revision = dvmarevplus;
		printk("Revision 1 PLUS ");
		break;
	default:
		printk("unknown dma version %08x",
		       sbus_readl(dma->regs + DMA_CSR) & DMA_DEVICE_ID);
		dma->allocated = 1;
		break;
	}
	printk("\n");
#if 0 /* Clutters up the screen */
	dump_dma_regs(dma->regs);
#endif
}

开发者ID:archith，项目名称:camera_project，代码行数:43，代码来源:dvma.c

示例11: leo_wait

static void leo_wait(struct leo_lx_krn __iomem *lx_krn)
{
	int i;
	
	for (i = 0;
	     (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000;
	     i++)
		udelay (1); /* Busy wait at most 0.3 sec */
	return;
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:10，代码来源:leo.c

示例12: qec_interrupt

/* Interrupts for all QE's get filtered out via the QEC master controller,
 * so we just run through each qe and check to see who is signaling
 * and thus needs to be serviced.
 */
static irqreturn_t qec_interrupt(int irq, void *dev_id)
{
	struct sunqec *qecp = dev_id;
	u32 qec_status;
	int channel = 0;

	/* Latch the status now. */
	qec_status = sbus_readl(qecp->gregs + GLOB_STAT);
	while (channel < 4) {
		if (qec_status & 0xf) {
			struct sunqe *qep = qecp->qes[channel];
			u32 qe_status;

			qe_status = sbus_readl(qep->qcregs + CREG_STAT);
			if (qe_status & CREG_STAT_ERRORS) {
				if (qe_is_bolixed(qep, qe_status))
					goto next;
			}
			if (qe_status & CREG_STAT_RXIRQ)
				qe_rx(qep);
			if (netif_queue_stopped(qep->dev) &&
			    (qe_status & CREG_STAT_TXIRQ)) {
				spin_lock(&qep->lock);
				qe_tx_reclaim(qep);
				if (TX_BUFFS_AVAIL(qep) > 0) {
					/* Wake net queue and return to
					 * lazy tx reclaim.
					 */
					netif_wake_queue(qep->dev);
					sbus_writel(1, qep->qcregs + CREG_TIMASK);
				}
				spin_unlock(&qep->lock);
			}
	next:
			;
		}
		qec_status >>= 4;
		channel++;
	}

	return IRQ_HANDLED;
}

开发者ID:Lyude，项目名称:linux，代码行数:46，代码来源:sunqe.c

示例13: leo_init_hw

static void leo_init_hw(struct fb_info *info)
{
	struct leo_par *par = (struct leo_par *) info->par;
	u32 val;

	val = sbus_readl(&par->ld_ss1->ss1_misc);
	val |= LEO_SS1_MISC_ENABLE;
	sbus_writel(val, &par->ld_ss1->ss1_misc);

	leo_switch_from_graph(info);
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:11，代码来源:leo.c

示例14: vfc_i2c_wait_for_bus

int vfc_i2c_wait_for_bus(struct vfc_dev *dev) 
{
	int timeout = 1000; 

	while(!(sbus_readl(&dev->regs->i2c_s1) & BB)) {
		if(!(timeout--))
			return -ETIMEDOUT;
		vfc_i2c_delay(dev);
	}
	return 0;
}

开发者ID:kzlin129，项目名称:tt-gpl，代码行数:11，代码来源:vfc_i2c.c

示例15: leo_restore_palette

static void leo_restore_palette (struct fb_info_sbusfb *fb)
{
	u32 tmp;
	unsigned long flags;

	spin_lock_irqsave(&fb->lock, flags);
	tmp = sbus_readl(&fb->s.leo.ld_ss1->ss1_misc);
	tmp &= ~(LEO_SS1_MISC_ENABLE);
	sbus_writel(tmp, &fb->s.leo.ld_ss1->ss1_misc);
	spin_unlock_irqrestore(&fb->lock, flags);
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:11，代码来源:leofb.c

示例16: leo_switch_from_graph

static void leo_switch_from_graph(struct fb_info *info)
{
	struct leo_par *par = (struct leo_par *) info->par;
	struct leo_ld_ss0 __iomem *ss = par->ld_ss0;
	struct leo_cursor __iomem *cursor = par->cursor;
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&par->lock, flags);

	par->extent = ((info->var.xres - 1) |
		       ((info->var.yres - 1) << 16));

	sbus_writel(0xffffffff, &ss->wid);
	sbus_writel(0xffff, &ss->wmask);
	sbus_writel(0, &ss->vclipmin);
	sbus_writel(par->extent, &ss->vclipmax);
	sbus_writel(0, &ss->fg);
	sbus_writel(0xff000000, &ss->planemask);
	sbus_writel(0x310850, &ss->rop);
	sbus_writel(0, &ss->widclip);
	sbus_writel((info->var.xres-1) | ((info->var.yres-1) << 11),
		    &par->lc_ss0_usr->extent);
	sbus_writel(4, &par->lc_ss0_usr->addrspace);
	sbus_writel(0x80000000, &par->lc_ss0_usr->fill);
	sbus_writel(0, &par->lc_ss0_usr->fontt);
	do {
		val = sbus_readl(&par->lc_ss0_usr->csr);
	} while (val & 0x20000000);

	/* setup screen buffer for cfb_* functions */
	sbus_writel(1, &ss->wid);
	sbus_writel(0x00ffffff, &ss->planemask);
	sbus_writel(0x310b90, &ss->rop);
	sbus_writel(0, &par->lc_ss0_usr->addrspace);

	/* hide cursor */
	sbus_writel(sbus_readl(&cursor->cur_misc) & ~LEO_CUR_ENABLE, &cursor->cur_misc);

	spin_unlock_irqrestore(&par->lock, flags);
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:41，代码来源:leo.c

示例17: leo_blank

static void leo_blank (struct fb_info_sbusfb *fb)
{
	unsigned long flags;
	u32 tmp;

	spin_lock_irqsave(&fb->lock, flags);
	sbus_writel(LEO_KRN_TYPE_VIDEO, &fb->s.leo.lx_krn->krn_type);

	tmp = sbus_readl(&fb->s.leo.lx_krn->krn_csr);
	tmp &= ~LEO_KRN_CSR_ENABLE;
	sbus_writel(tmp, &fb->s.leo.lx_krn->krn_csr);
	spin_unlock_irqrestore(&fb->lock, flags);
}

开发者ID:SimonKagstrom，项目名称:mci500h-linux-2.4.27，代码行数:13，代码来源:leofb.c

示例18: myri_interrupt

static irqreturn_t myri_interrupt(int irq, void *dev_id)
{
	struct net_device *dev		= (struct net_device *) dev_id;
	struct myri_eth *mp		= netdev_priv(dev);
	void __iomem *lregs		= mp->lregs;
	struct myri_channel __iomem *chan = &mp->shmem->channel;
	unsigned long flags;
	u32 status;
	int handled = 0;

	spin_lock_irqsave(&mp->irq_lock, flags);

	status = sbus_readl(lregs + LANAI_ISTAT);
	DIRQ(("myri_interrupt: status[%08x] ", status));
	if (status & ISTAT_HOST) {
		u32 softstate;

		handled = 1;
		DIRQ(("IRQ_DISAB "));
		myri_disable_irq(lregs, mp->cregs);
		softstate = sbus_readl(&chan->state);
		DIRQ(("state[%08x] ", softstate));
		if (softstate != STATE_READY) {
			DIRQ(("myri_not_so_happy "));
			myri_is_not_so_happy(mp);
		}
		DIRQ(("\nmyri_rx: "));
		myri_rx(mp, dev);
		DIRQ(("\nistat=ISTAT_HOST "));
		sbus_writel(ISTAT_HOST, lregs + LANAI_ISTAT);
		DIRQ(("IRQ_ENAB "));
		myri_enable_irq(lregs, mp->cregs);
	}
	DIRQ(("\n"));

	spin_unlock_irqrestore(&mp->irq_lock, flags);

	return IRQ_RETVAL(handled);
}

开发者ID:nos1609，项目名称:Chrono_Kernel-1，代码行数:39，代码来源:myri_sbus.c

示例19: write_tcvr_bit

static void write_tcvr_bit(struct bigmac *bp, void __iomem *tregs, int bit)
{
	if (bp->tcvr_type == internal) {
		bit = (bit & 1) << 3;
		sbus_writel(bit | (MGMT_PAL_OENAB | MGMT_PAL_EXT_MDIO),
			    tregs + TCVR_MPAL);
		sbus_readl(tregs + TCVR_MPAL);
		sbus_writel(bit | MGMT_PAL_OENAB | MGMT_PAL_EXT_MDIO | MGMT_PAL_DCLOCK,
			    tregs + TCVR_MPAL);
		sbus_readl(tregs + TCVR_MPAL);
	} else if (bp->tcvr_type == external) {
		bit = (bit & 1) << 2;
		sbus_writel(bit | MGMT_PAL_INT_MDIO | MGMT_PAL_OENAB,
			    tregs + TCVR_MPAL);
		sbus_readl(tregs + TCVR_MPAL);
		sbus_writel(bit | MGMT_PAL_INT_MDIO | MGMT_PAL_OENAB | MGMT_PAL_DCLOCK,
			    tregs + TCVR_MPAL);
		sbus_readl(tregs + TCVR_MPAL);
	} else {
		printk(KERN_ERR "write_tcvr_bit: No transceiver type known!\n");
	}
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:22，代码来源:sunbmac.c

示例20: myri_clean_rings

static void myri_clean_rings(struct myri_eth *mp)
{
	struct sendq __iomem *sq = mp->sq;
	struct recvq __iomem *rq = mp->rq;
	int i;

	sbus_writel(0, &rq->tail);
	sbus_writel(0, &rq->head);
	for (i = 0; i < (RX_RING_SIZE+1); i++) {
		if (mp->rx_skbs[i] != NULL) {
			struct myri_rxd __iomem *rxd = &rq->myri_rxd[i];
			u32 dma_addr;

			dma_addr = sbus_readl(&rxd->myri_scatters[0].addr);
			dma_unmap_single(&mp->myri_op->dev, dma_addr,
					 RX_ALLOC_SIZE, DMA_FROM_DEVICE);
			dev_kfree_skb(mp->rx_skbs[i]);
			mp->rx_skbs[i] = NULL;
		}
	}

	mp->tx_old = 0;
	sbus_writel(0, &sq->tail);
	sbus_writel(0, &sq->head);
	for (i = 0; i < TX_RING_SIZE; i++) {
		if (mp->tx_skbs[i] != NULL) {
			struct sk_buff *skb = mp->tx_skbs[i];
			struct myri_txd __iomem *txd = &sq->myri_txd[i];
			u32 dma_addr;

			dma_addr = sbus_readl(&txd->myri_gathers[0].addr);
			dma_unmap_single(&mp->myri_op->dev, dma_addr,
					 (skb->len + 3) & ~3,
					 DMA_TO_DEVICE);
			dev_kfree_skb(mp->tx_skbs[i]);
			mp->tx_skbs[i] = NULL;
		}
	}
}

开发者ID:nos1609，项目名称:Chrono_Kernel-1，代码行数:39，代码来源:myri_sbus.c

注：本文中的sbus_readl函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sbus_writeb函数代码示例发布时间：2022-05-30

C++ sbus_readb函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17952|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9564|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8127|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8508|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8411|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9303|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8375|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7807|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8359|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7360|2022-11-06

客服电话

电子邮件

C++ sbus_readl函数代码示例

示例1: bigmac_rx_reset

示例2: sun4m_nmi

示例3: leo_clear

示例4: leo_switch_from_graph

示例5: leo_loadcmap

示例6: myri_do_handshake

示例7: parport_sunbpp_disable_irq

示例8: leo_wait

示例9: bigmac_tx_reset

示例10: init_one_dvma

示例11: leo_wait

示例12: qec_interrupt

示例13: leo_init_hw

示例14: vfc_i2c_wait_for_bus

示例15: leo_restore_palette

示例16: leo_switch_from_graph

示例17: leo_blank

示例18: myri_interrupt

示例19: write_tcvr_bit

示例20: myri_clean_rings

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

RADDELPHIXE5的android开发环境配置

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053