C++ sched_clock_idle_sleep_event函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sched_clock_idle_sleep_event函数的典型用法代码示例。如果您正苦于以下问题：C++ sched_clock_idle_sleep_event函数的具体用法？C++ sched_clock_idle_sleep_event怎么用？C++ sched_clock_idle_sleep_event使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sched_clock_idle_sleep_event函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @drv: cpuidle driver with cpuidle state information
 * @index: the index of suggested state
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);

	pr = __this_cpu_read(processors);

	if (unlikely(!pr))
		return -EINVAL;

	if (cx->entry_method == ACPI_CSTATE_FFH) {
		if (current_set_polling_and_test())
			return -EINVAL;
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);

	sched_clock_idle_wakeup_event(0);

	lapic_timer_state_broadcast(pr, cx, 0);
	return index;
}

开发者ID:AndroidGX，项目名称:SimpleGX-L-5.0.2_BOD6_G901F，代码行数:40，代码来源:processor_idle.c

示例2: acpi_idle_enter_simple

static int acpi_idle_enter_simple(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
	ktime_t  kt1, kt2;
	s64 idle_time_ns;
	s64 idle_time;

	pr = __this_cpu_read(processors);
	dev->last_residency = 0;

	if (unlikely(!pr))
		return -EINVAL;

	local_irq_disable();

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		smp_mb();

		if (unlikely(need_resched())) {
			current_thread_info()->status |= TS_POLLING;
			local_irq_enable();
			return -EINVAL;
		}
	}

	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	kt1 = ktime_get_real();
	
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);
	kt2 = ktime_get_real();
	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
	idle_time = idle_time_ns;
	do_div(idle_time, NSEC_PER_USEC);

	
	dev->last_residency = (int)idle_time;

	
	sched_clock_idle_wakeup_event(idle_time_ns);

	local_irq_enable();
	if (cx->entry_method != ACPI_CSTATE_FFH)
		current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	cx->time += idle_time;
	return index;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:59，代码来源:processor_idle.c

示例3: tick_nohz_start_idle

static ktime_t tick_nohz_start_idle(int cpu, struct tick_sched *ts)
{
	ktime_t now = ktime_get();

	ts->idle_entrytime = now;
	ts->idle_active = 1;
	sched_clock_idle_sleep_event();
	return now;
}

开发者ID:AnwariJr，项目名称:Zenfone-Kernel，代码行数:9，代码来源:tick-sched.c

示例4: tick_nohz_start_idle

static ktime_t tick_nohz_start_idle(int cpu, struct tick_sched *ts)
{
	ktime_t now = ktime_get();

	ts->idle_entrytime = now;
	ts->idle_active = 1;
	
#ifdef CONFIG_MT_LOAD_BALANCE_PROFILER
	mt_lbprof_update_state(cpu, MT_LBPROF_NO_TASK_STATE);
#endif	

	sched_clock_idle_sleep_event();
	return now;
}

开发者ID:erfae，项目名称:KashKernel_4.2，代码行数:14，代码来源:tick-sched.c

示例5: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @drv: cpuidle driver with cpuidle state information
 * @index: the index of suggested state
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);

	pr = __this_cpu_read(processors);

	if (unlikely(!pr))
		return -EINVAL;

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		/*
		 * TS_POLLING-cleared state must be visible before we test
		 * NEED_RESCHED:
		 */
		smp_mb();

		if (unlikely(need_resched())) {
			current_thread_info()->status |= TS_POLLING;
			return -EINVAL;
		}
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);

	sched_clock_idle_wakeup_event(0);

	if (cx->entry_method != ACPI_CSTATE_FFH)
		current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	return index;
}

开发者ID:ArthySundaram，项目名称:chromeos-kvm，代码行数:55，代码来源:processor_idle.c

示例6: tick_nohz_start_idle

static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
{
	ktime_t now, delta;

	now = ktime_get();
	if (ts->idle_active) {
		delta = ktime_sub(now, ts->idle_entrytime);
		ts->idle_lastupdate = now;
		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
	}
	ts->idle_entrytime = now;
	ts->idle_active = 1;
	sched_clock_idle_sleep_event();
	return now;
}

开发者ID:marcero，项目名称:ab73kernel-Hannspad-2632，代码行数:15，代码来源:tick-sched.c

示例7: omap3_enter_idle

static int omap3_enter_idle(struct cpuidle_device *dev,
			struct cpuidle_state *state)
{
	struct omap3_processor_cx *cx;
	u8 cur_per_state, cur_neon_state, pre_neon_state, pre_per_state;
	struct timespec ts_preidle, ts_postidle, ts_idle;
	u32 fclken_core, iclken_core, fclken_per, iclken_per;
	u32 sdrcpwr_val, sdrc_power_register = 0x0;
	int wakeup_latency;
	int core_sleep_flg = 0;
	u32 per_ctx_saved = 0;
	int ret = -1;
#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
	int idle_status = 0;
#endif

	local_irq_disable();
	local_fiq_disable();

	if (need_resched()) {
		local_irq_enable();
		local_fiq_enable();
		return 0;
	}

#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
	sw_latency_arr[swlat_arr_wrptr].sleep_start =
				 omap_32k_sync_timer_read();
#endif
	PM_PREPWSTST_MPU = 0xFF;
	PM_PREPWSTST_CORE = 0xFF;
	PM_PREPWSTST_NEON = 0xFF;
	PM_PREPWSTST_PER = 0xFF;

	cx = cpuidle_get_statedata(state);

	target_state.mpu_state = cx->mpu_state;
	target_state.core_state = cx->core_state;

	/* take a time marker for residency */
	getnstimeofday(&ts_preidle);

	if (cx->type == OMAP3_STATE_C0) {
		omap_sram_idle();
		goto return_sleep_time;
	}

	if (cx->type > OMAP3_STATE_C1)
		sched_clock_idle_sleep_event(); /* about to enter deep idle */

	correct_target_state();
	wakeup_latency = cx->wakeup_latency;
	if (target_state.core_state != cx->core_state) {
		/* Currently, this can happen only for core_off */
		/* Adjust wakeup latency to that of core_cswr state */
		/* Hard coded now and needs to be made more generic */
		/* omap3_power_states[4] is CSWR for core */
		wakeup_latency = omap3_power_states[4].wakeup_latency;
	}

	/* Reprogram next wake up tick to adjust for wake latency */
	if (wakeup_latency > 1000) {
		struct tick_device *d = tick_get_device(smp_processor_id());
		ktime_t adjust, next, now = ktime_get();
		if (ktime_to_ns(ktime_sub(d->evtdev->next_event, now)) >
			(wakeup_latency * 1000 + NSEC_PER_MSEC)) {
			adjust = ktime_set(0, (wakeup_latency * 1000));
			next = ktime_sub(d->evtdev->next_event, adjust);
			clockevents_program_event(d->evtdev, next, now);
		}
	}

	/* Check for pending interrupts. If there is an interrupt, return */
	if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
		goto return_sleep_time;

	prcm_get_power_domain_state(DOM_PER, &cur_per_state);
	prcm_get_power_domain_state(DOM_NEON, &cur_neon_state);

	fclken_core = CM_FCLKEN1_CORE;
	iclken_core = CM_ICLKEN1_CORE;
	fclken_per = CM_FCLKEN_PER;
	iclken_per = CM_ICLKEN_PER;

	/* If target state if core_off, save registers
	 * before changing anything
	 */
	if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
		prcm_save_registers(&target_state);
		omap_uart_save_ctx(0);
		omap_uart_save_ctx(1);
	}

	/* Check for pending interrupts. If there is an interrupt, return */
	if (INTCPS_PENDING_IRQ0 | INTCPS_PENDING_IRQ1 | INTCPS_PENDING_IRQ2)
		goto return_sleep_time;

	/* Program MPU and NEON to target state */
	if (target_state.mpu_state > PRCM_MPU_ACTIVE) {
		if ((cur_neon_state == PRCM_ON) &&
//.........这里部分代码省略.........

开发者ID:smartassfox，项目名称:archos_kernel_27，代码行数:101，代码来源:pm_idle_34xx.c

示例8: acpi_idle_enter_bm

static int acpi_idle_enter_bm(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
	ktime_t  kt1, kt2;
	s64 idle_time_ns;
	s64 idle_time;


	pr = __this_cpu_read(processors);
	dev->last_residency = 0;

	if (unlikely(!pr))
		return -EINVAL;

	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
		if (drv->safe_state_index >= 0) {
			return drv->states[drv->safe_state_index].enter(dev,
						drv, drv->safe_state_index);
		} else {
			local_irq_disable();
			acpi_safe_halt();
			local_irq_enable();
			return -EINVAL;
		}
	}

	local_irq_disable();

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		smp_mb();

		if (unlikely(need_resched())) {
			current_thread_info()->status |= TS_POLLING;
			local_irq_enable();
			return -EINVAL;
		}
	}

	acpi_unlazy_tlb(smp_processor_id());

	
	sched_clock_idle_sleep_event();
	lapic_timer_state_broadcast(pr, cx, 1);

	kt1 = ktime_get_real();
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		c3_cpu_count++;
		
		if (c3_cpu_count == num_online_cpus())
			acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
		raw_spin_unlock(&c3_lock);
	} else if (!pr->flags.bm_check) {
		ACPI_FLUSH_CPU_CACHE();
	}

	acpi_idle_do_entry(cx);

	
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
		c3_cpu_count--;
		raw_spin_unlock(&c3_lock);
	}
	kt2 = ktime_get_real();
	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
	idle_time = idle_time_ns;
	do_div(idle_time, NSEC_PER_USEC);

	
	dev->last_residency = (int)idle_time;

	
	sched_clock_idle_wakeup_event(idle_time_ns);

	local_irq_enable();
	if (cx->entry_method != ACPI_CSTATE_FFH)
		current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	cx->time += idle_time;
	return index;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:90，代码来源:processor_idle.c

示例9: acpi_idle_enter_bm

/**
 * acpi_idle_enter_bm - enters C3 with proper BM handling
 * @dev: the target CPU
 * @drv: cpuidle driver containing state data
 * @index: the index of suggested state
 *
 * If BM is detected, the deepest non-C3 idle state is entered instead.
 */
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);

	pr = __this_cpu_read(processors);

	if (unlikely(!pr))
		return -EINVAL;

	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
		if (drv->safe_state_index >= 0) {
			return drv->states[drv->safe_state_index].enter(dev,
						drv, drv->safe_state_index);
		} else {
			acpi_safe_halt();
			return -EBUSY;
		}
	}

	if (cx->entry_method == ACPI_CSTATE_FFH) {
		if (current_set_polling_and_test())
			return -EINVAL;
	}

	acpi_unlazy_tlb(smp_processor_id());

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	/*
	 * disable bus master
	 * bm_check implies we need ARB_DIS
	 * !bm_check implies we need cache flush
	 * bm_control implies whether we can do ARB_DIS
	 *
	 * That leaves a case where bm_check is set and bm_control is
	 * not set. In that case we cannot do much, we enter C3
	 * without doing anything.
	 */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		c3_cpu_count++;
		/* Disable bus master arbitration when all CPUs are in C3 */
		if (c3_cpu_count == num_online_cpus())
			acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
		raw_spin_unlock(&c3_lock);
	} else if (!pr->flags.bm_check) {
		ACPI_FLUSH_CPU_CACHE();
	}

	acpi_idle_do_entry(cx);

	/* Re-enable bus master arbitration */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
		c3_cpu_count--;
		raw_spin_unlock(&c3_lock);
	}

	sched_clock_idle_wakeup_event(0);

	lapic_timer_state_broadcast(pr, cx, 0);
	return index;
}

开发者ID:AndroidGX，项目名称:SimpleGX-L-5.0.2_BOD6_G901F，代码行数:80，代码来源:processor_idle.c

示例10: acpi_idle_enter_bm

/**
 * acpi_idle_enter_bm - enters C3 with proper BM handling
 * @dev: the target CPU
 * @state: the state data
 *
 * If BM is detected, the deepest non-C3 idle state is entered instead.
 */
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
			      struct cpuidle_state *state)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
	u32 t1, t2;
	int sleep_ticks = 0;

	pr = __get_cpu_var(processors);

	if (unlikely(!pr))
		return 0;

	if (acpi_idle_suspend)
		return(acpi_idle_enter_c1(dev, state));

	if (acpi_idle_bm_check()) {
		if (dev->safe_state) {
			dev->last_state = dev->safe_state;
			return dev->safe_state->enter(dev, dev->safe_state);
		} else {
			local_irq_disable();
			acpi_safe_halt();
			local_irq_enable();
			return 0;
		}
	}

	local_irq_disable();
	current_thread_info()->status &= ~TS_POLLING;
	/*
	 * TS_POLLING-cleared state must be visible before we test
	 * NEED_RESCHED:
	 */
	smp_mb();

	if (unlikely(need_resched())) {
		current_thread_info()->status |= TS_POLLING;
		local_irq_enable();
		return 0;
	}

	acpi_unlazy_tlb(smp_processor_id());

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	acpi_state_timer_broadcast(pr, cx, 1);

	/*
	 * disable bus master
	 * bm_check implies we need ARB_DIS
	 * !bm_check implies we need cache flush
	 * bm_control implies whether we can do ARB_DIS
	 *
	 * That leaves a case where bm_check is set and bm_control is
	 * not set. In that case we cannot do much, we enter C3
	 * without doing anything.
	 */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		spin_lock(&c3_lock);
		c3_cpu_count++;
		/* Disable bus master arbitration when all CPUs are in C3 */
		if (c3_cpu_count == num_online_cpus())
			acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
		spin_unlock(&c3_lock);
	} else if (!pr->flags.bm_check) {
		ACPI_FLUSH_CPU_CACHE();
	}

	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
	acpi_idle_do_entry(cx);
	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);

	/* Re-enable bus master arbitration */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		spin_lock(&c3_lock);
		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
		c3_cpu_count--;
		spin_unlock(&c3_lock);
	}

#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
	/* TSC could halt in idle, so notify users */
	if (tsc_halts_in_c(ACPI_STATE_C3))
		mark_tsc_unstable("TSC halts in idle");
#endif
	sleep_ticks = ticks_elapsed(t1, t2);
	/* Tell the scheduler how much we idled: */
	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
//.........这里部分代码省略.........

开发者ID:10x-Amin，项目名称:x10_Th_kernel，代码行数:101，代码来源:processor_idle.c

示例11: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @state: the state data
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
				  struct cpuidle_state *state)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
	u32 t1, t2;
	int sleep_ticks = 0;

	pr = __get_cpu_var(processors);

	if (unlikely(!pr))
		return 0;

	if (acpi_idle_suspend)
		return(acpi_idle_enter_c1(dev, state));

	local_irq_disable();
	current_thread_info()->status &= ~TS_POLLING;
	/*
	 * TS_POLLING-cleared state must be visible before we test
	 * NEED_RESCHED:
	 */
	smp_mb();

	if (unlikely(need_resched())) {
		current_thread_info()->status |= TS_POLLING;
		local_irq_enable();
		return 0;
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	acpi_state_timer_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);
	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);

#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
	/* TSC could halt in idle, so notify users */
	if (tsc_halts_in_c(cx->type))
		mark_tsc_unstable("TSC halts in idle");;
#endif
	sleep_ticks = ticks_elapsed(t1, t2);

	/* Tell the scheduler how much we idled: */
	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);

	local_irq_enable();
	current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	acpi_state_timer_broadcast(pr, cx, 0);
	cx->time += sleep_ticks;
	return ticks_elapsed_in_us(t1, t2);
}

开发者ID:10x-Amin，项目名称:x10_Th_kernel，代码行数:69，代码来源:processor_idle.c

示例12: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @index: the index of suggested state
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
	ktime_t  kt1, kt2;
	s64 idle_time;
	s64 sleep_ticks = 0;

	pr = __get_cpu_var(processors);
	dev->last_residency = 0;

	if (unlikely(!pr))
		return -EINVAL;

	local_irq_disable();

	if (acpi_idle_suspend) {
		local_irq_enable();
		cpu_relax();
		return -EBUSY;
	}

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		/*
		 * TS_POLLING-cleared state must be visible before we test
		 * NEED_RESCHED:
		 */
		smp_mb();
	}

	if (unlikely(need_resched())) {
		current_thread_info()->status |= TS_POLLING;
		local_irq_enable();
		return -EINVAL;
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	kt1 = ktime_get_real();
	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);
	kt2 = ktime_get_real();
	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));

	sleep_ticks = us_to_pm_timer_ticks(idle_time);

	/* Update device last_residency*/
	dev->last_residency = (int)idle_time;

	/* Tell the scheduler how much we idled: */
	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);

	local_irq_enable();
	current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	cx->time += idle_time;
	return index;
}

开发者ID:seyko2，项目名称:openvz_rhel6_kernel_mirror，代码行数:76，代码来源:processor_idle.c

示例13: omap3_enter_idle

static int omap3_enter_idle(struct cpuidle_device *dev,
			struct cpuidle_state *state)
{
	struct omap3_processor_cx *cx;
	struct timespec ts_preidle;
	struct timespec ts_postidle;
	struct timespec ts_idle;

	/* Used for LPR mode DSS context save/restore. */
	u32 pm_wken_dss      = 0;
	u32 pm_pwstctrl_dss  = 0;
	u32 cm_clkstctrl_dss = 0;
	u32 cm_fclken_dss    = 0;
	u32 cm_iclken_dss    = 0;
	u32 cm_autoidle_dss  = 0;

	u32 fclken_core;
	u32 iclken_core;
	u32 fclken_per;
	u32 iclken_per;

	int wakeup_latency;

	struct system_power_state target_state;
	struct system_power_state cur_state;

#ifdef CONFIG_HW_SUP_TRANS
	u32 sleepdep_per;
	u32 wakedep_per;
#endif /* #ifdef CONFIG_HW_SUP_TRANS */

	u32 sdrc_power_register = 0;
	int core_sleep_flg = 0;
	int got_console_lock = 0;

	/* Disable interrupts.
	 */
	local_irq_disable();
	local_fiq_disable();

	/* If need resched - return immediately
	 */ 
	if( need_resched()) {
		local_fiq_enable();
		local_irq_enable();
		return 0;
	}

	/* Reset previous power state registers.
	 */
	clear_prepwstst();

	omap3_idle_setup_wkup_sources ();
	
	/* Set up target state from state context provided by cpuidle.
	 */
	cx = cpuidle_get_statedata(state);
	target_state.mpu_state  = cx->mpu_state;
	target_state.core_state = cx->core_state;
	target_state.neon_state = 0; /* Avoid gcc warning. Will be set in
					adjust_target_states(). */

	/* take a time marker for residency.
	 */
	getnstimeofday(&ts_preidle);

	/* If the requested state is C0, we bail here...
	 */
	if (cx->type == OMAP3_STATE_C1) {
		omap_sram_idle(target_state.mpu_state);
		goto return_sleep_time;
	}

	if (cx->type > OMAP3_STATE_C2)
		sched_clock_idle_sleep_event(); /* about to enter deep idle */

	/* Adjust PER and NEON domain target states as well as CORE domain
	 * target state depending on MPU/CORE setting, enable_off sysfs entry
	 * and PER timer status.
	 */
	adjust_target_states(&target_state);

	wakeup_latency = cx->wakeup_latency;
	/* NOTE:
	 *   We will never get the condition below as we are not supporting
	 *   CORE OFF right now. Keeping this code around for future reference.
	 */
	if (target_state.core_state != cx->core_state) {
		/* Currently, this can happen only for core_off. Adjust wakeup
		 * latency to that of core_cswr state. Hard coded now and needs
		 * to be made more generic omap3_power_states[4] is CSWR for
		 * core */
		wakeup_latency = omap3_power_states[4].wakeup_latency;
	}

	/* Reprogram next wake up tick to adjust for wake latency */
	if (wakeup_latency > 1000) {
		struct tick_device *d = tick_get_device(smp_processor_id());
		ktime_t now = ktime_get();

//.........这里部分代码省略.........

开发者ID:mozyg，项目名称:kernel，代码行数:101，代码来源:pm_cpuidle.c

注：本文中的sched_clock_idle_sleep_event函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sched_clock_idle_wakeup_event函数代码示例发布时间：2022-05-30

C++ sched_autogroup_fork函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17948|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8507|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8410|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9301|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8374|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8357|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7359|2022-11-06

客服电话

电子邮件

C++ sched_clock_idle_sleep_event函数代码示例

示例1: acpi_idle_enter_simple

示例2: acpi_idle_enter_simple

示例3: tick_nohz_start_idle

示例4: tick_nohz_start_idle

示例5: acpi_idle_enter_simple

示例6: tick_nohz_start_idle

示例7: omap3_enter_idle

示例8: acpi_idle_enter_bm

示例9: acpi_idle_enter_bm

示例10: acpi_idle_enter_bm

示例11: acpi_idle_enter_simple

示例12: acpi_idle_enter_simple

示例13: omap3_enter_idle

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

geekammo/MicroView-Arduino-Library: Micr

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053