C++ sched_clock_idle_wakeup_event函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sched_clock_idle_wakeup_event函数的典型用法代码示例。如果您正苦于以下问题：C++ sched_clock_idle_wakeup_event函数的具体用法？C++ sched_clock_idle_wakeup_event怎么用？C++ sched_clock_idle_wakeup_event使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sched_clock_idle_wakeup_event函数的13个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @drv: cpuidle driver with cpuidle state information
 * @index: the index of suggested state
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);

	pr = __this_cpu_read(processors);

	if (unlikely(!pr))
		return -EINVAL;

	if (cx->entry_method == ACPI_CSTATE_FFH) {
		if (current_set_polling_and_test())
			return -EINVAL;
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);

	sched_clock_idle_wakeup_event(0);

	lapic_timer_state_broadcast(pr, cx, 0);
	return index;
}

开发者ID:AndroidGX，项目名称:SimpleGX-L-5.0.2_BOD6_G901F，代码行数:40，代码来源:processor_idle.c

示例2: acpi_idle_enter_simple

static int acpi_idle_enter_simple(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
	ktime_t  kt1, kt2;
	s64 idle_time_ns;
	s64 idle_time;

	pr = __this_cpu_read(processors);
	dev->last_residency = 0;

	if (unlikely(!pr))
		return -EINVAL;

	local_irq_disable();

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		smp_mb();

		if (unlikely(need_resched())) {
			current_thread_info()->status |= TS_POLLING;
			local_irq_enable();
			return -EINVAL;
		}
	}

	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	kt1 = ktime_get_real();
	
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);
	kt2 = ktime_get_real();
	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
	idle_time = idle_time_ns;
	do_div(idle_time, NSEC_PER_USEC);

	
	dev->last_residency = (int)idle_time;

	
	sched_clock_idle_wakeup_event(idle_time_ns);

	local_irq_enable();
	if (cx->entry_method != ACPI_CSTATE_FFH)
		current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	cx->time += idle_time;
	return index;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:59，代码来源:processor_idle.c

示例3: tick_nohz_stop_idle

static void tick_nohz_stop_idle(int cpu, ktime_t now)
{
	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);

	update_ts_time_stats(cpu, ts, now, NULL);
	ts->idle_active = 0;

	sched_clock_idle_wakeup_event(0);
}

开发者ID:AdiPat，项目名称:android_kernel_tegra_n1，代码行数:9，代码来源:tick-sched.c

示例4: tick_nohz_stop_idle

static void tick_nohz_stop_idle(int cpu, ktime_t now)
{
	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
	ktime_t delta;

	delta = ktime_sub(now, ts->idle_entrytime);
	ts->idle_lastupdate = now;
	ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
	ts->idle_active = 0;

	sched_clock_idle_wakeup_event(0);
}

开发者ID:marcero，项目名称:ab73kernel-Hannspad-2632，代码行数:12，代码来源:tick-sched.c

示例5: tick_nohz_stop_idle

static void tick_nohz_stop_idle(int cpu, ktime_t now)
{
	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);

	update_ts_time_stats(cpu, ts, now, NULL);
	ts->idle_active = 0;
	
#ifdef CONFIG_MT_LOAD_BALANCE_PROFILER
	mt_lbprof_update_state(cpu, MT_LBPROF_NO_TASK_STATE);
#endif

	sched_clock_idle_wakeup_event(0);
}

开发者ID:erfae，项目名称:KashKernel_4.2，代码行数:13，代码来源:tick-sched.c

示例6: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @drv: cpuidle driver with cpuidle state information
 * @index: the index of suggested state
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);

	pr = __this_cpu_read(processors);

	if (unlikely(!pr))
		return -EINVAL;

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		/*
		 * TS_POLLING-cleared state must be visible before we test
		 * NEED_RESCHED:
		 */
		smp_mb();

		if (unlikely(need_resched())) {
			current_thread_info()->status |= TS_POLLING;
			return -EINVAL;
		}
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);

	sched_clock_idle_wakeup_event(0);

	if (cx->entry_method != ACPI_CSTATE_FFH)
		current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	return index;
}

开发者ID:ArthySundaram，项目名称:chromeos-kvm，代码行数:55，代码来源:processor_idle.c

示例7: omap3_enter_idle


//.........这里部分代码省略.........
	/* Continue core restoration part, only if Core-Sleep is attempted */
	if ((target_state.core_state > PRCM_CORE_ACTIVE) && core_sleep_flg) {
		prcm_set_core_domain_state(PRCM_CORE_ACTIVE);

#ifdef CONFIG_OMAP_SMARTREFLEX
		enable_smartreflex(SR1_ID);
		enable_smartreflex(SR2_ID);
#endif

		if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
#ifdef CONFIG_OMAP34XX_OFFMODE
			context_restore_update(DOM_CORE1);
#endif
			prcm_restore_registers(&target_state);
			prcm_restore_core_context(target_state.core_state);
			omap3_restore_core_settings();
			}
		/* Errata 1.4
		* if the timer device gets idled which is when we
		* are cutting the timer ICLK which is when we try
		* to put Core to RET.
		* Wait Period = 2 timer interface clock cycles +
		* 1 timer functional clock cycle
		* Interface clock = L4 clock. For the computation L4
		* clock is assumed at 50MHz (worst case).
		* Functional clock = 32KHz
		* Wait Period = 2*10^-6/50 + 1/32768 = 0.000030557 = 30.557uSec
		* Roundingoff the delay value to a safer 50uSec
		*/
		omap_udelay(GPTIMER_WAIT_DELAY);
		CM_AUTOIDLE_WKUP &= ~(0x1);
		if (core_off_notification != NULL)
			core_off_notification(PRCM_FALSE);
	}

	if (cur_per_state == PRCM_ON) {
		CM_FCLKEN_PER = fclken_per;
		CM_ICLKEN_PER = iclken_per;
		prcm_get_pre_power_domain_state(DOM_PER, &pre_per_state);
		if (pre_per_state == PRCM_OFF && per_ctx_saved) {
			if (enable_debug)
				per_off++;
			omap3_restore_per_context();
			post_uart_inactivity();
#ifdef CONFIG_OMAP34XX_OFFMODE
			context_restore_update(DOM_PER);
#endif
		}
	}

	pr_debug("MPU state:%x,CORE state:%x\n", PM_PREPWSTST_MPU,
							PM_PREPWSTST_CORE);
	store_prepwst();

return_sleep_time:
	getnstimeofday(&ts_postidle);
	ts_idle = timespec_sub(ts_postidle, ts_preidle);

	if (cx->type > OMAP3_STATE_C1)
		sched_clock_idle_wakeup_event(timespec_to_ns(&ts_idle));

#ifdef CONFIG_ENABLE_SWLATENCY_MEASURE
	if (idle_status) {
		sw_latency_arr[swlat_arr_wrptr].wkup_end =
					omap_32k_sync_timer_read();
		sw_latency_arr[swlat_arr_wrptr].wkup_start =
					wakeup_start_32ksync;

		sw_latency_arr[swlat_arr_wrptr].cstate =
			((PM_PREPWSTST_MPU & 0x3) << 2) |
			 (PM_PREPWSTST_CORE & 0x3) |
			 (omap_readl(0x48306CB0) << 16);

		swlat_arr_wrptr++;

		if (swlat_arr_wrptr == SW_LATENCY_ARR_SIZE)
			swlat_arr_wrptr = 0;
	}
#endif

	local_irq_enable();
	local_fiq_enable();

#ifdef OMAP3_START_RNG
	if (!is_device_type_gp()) {
		/*Start RNG after interrupts are enabled
		 * and only when CORE OFF was successful
		 */
		if (!(prepwst_core_rng & 0x3)) {
			ret = omap3_start_rng();
			if (ret)
				printk(KERN_INFO"Failed to generate new"
						" RN in idle %x\n", ret);
			prepwst_core_rng = 0xFF;
		}
	}
#endif

	return (u32)timespec_to_ns(&ts_idle)/1000;
}

开发者ID:smartassfox，项目名称:archos_kernel_27，代码行数:101，代码来源:pm_idle_34xx.c

示例8: acpi_idle_enter_bm

static int acpi_idle_enter_bm(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
	ktime_t  kt1, kt2;
	s64 idle_time_ns;
	s64 idle_time;


	pr = __this_cpu_read(processors);
	dev->last_residency = 0;

	if (unlikely(!pr))
		return -EINVAL;

	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
		if (drv->safe_state_index >= 0) {
			return drv->states[drv->safe_state_index].enter(dev,
						drv, drv->safe_state_index);
		} else {
			local_irq_disable();
			acpi_safe_halt();
			local_irq_enable();
			return -EINVAL;
		}
	}

	local_irq_disable();

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		smp_mb();

		if (unlikely(need_resched())) {
			current_thread_info()->status |= TS_POLLING;
			local_irq_enable();
			return -EINVAL;
		}
	}

	acpi_unlazy_tlb(smp_processor_id());

	
	sched_clock_idle_sleep_event();
	lapic_timer_state_broadcast(pr, cx, 1);

	kt1 = ktime_get_real();
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		c3_cpu_count++;
		
		if (c3_cpu_count == num_online_cpus())
			acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
		raw_spin_unlock(&c3_lock);
	} else if (!pr->flags.bm_check) {
		ACPI_FLUSH_CPU_CACHE();
	}

	acpi_idle_do_entry(cx);

	
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
		c3_cpu_count--;
		raw_spin_unlock(&c3_lock);
	}
	kt2 = ktime_get_real();
	idle_time_ns = ktime_to_ns(ktime_sub(kt2, kt1));
	idle_time = idle_time_ns;
	do_div(idle_time, NSEC_PER_USEC);

	
	dev->last_residency = (int)idle_time;

	
	sched_clock_idle_wakeup_event(idle_time_ns);

	local_irq_enable();
	if (cx->entry_method != ACPI_CSTATE_FFH)
		current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	cx->time += idle_time;
	return index;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:90，代码来源:processor_idle.c

示例9: acpi_idle_enter_bm

/**
 * acpi_idle_enter_bm - enters C3 with proper BM handling
 * @dev: the target CPU
 * @drv: cpuidle driver containing state data
 * @index: the index of suggested state
 *
 * If BM is detected, the deepest non-C3 idle state is entered instead.
 */
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
		struct cpuidle_driver *drv, int index)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);

	pr = __this_cpu_read(processors);

	if (unlikely(!pr))
		return -EINVAL;

	if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
		if (drv->safe_state_index >= 0) {
			return drv->states[drv->safe_state_index].enter(dev,
						drv, drv->safe_state_index);
		} else {
			acpi_safe_halt();
			return -EBUSY;
		}
	}

	if (cx->entry_method == ACPI_CSTATE_FFH) {
		if (current_set_polling_and_test())
			return -EINVAL;
	}

	acpi_unlazy_tlb(smp_processor_id());

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	/*
	 * disable bus master
	 * bm_check implies we need ARB_DIS
	 * !bm_check implies we need cache flush
	 * bm_control implies whether we can do ARB_DIS
	 *
	 * That leaves a case where bm_check is set and bm_control is
	 * not set. In that case we cannot do much, we enter C3
	 * without doing anything.
	 */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		c3_cpu_count++;
		/* Disable bus master arbitration when all CPUs are in C3 */
		if (c3_cpu_count == num_online_cpus())
			acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
		raw_spin_unlock(&c3_lock);
	} else if (!pr->flags.bm_check) {
		ACPI_FLUSH_CPU_CACHE();
	}

	acpi_idle_do_entry(cx);

	/* Re-enable bus master arbitration */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		raw_spin_lock(&c3_lock);
		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
		c3_cpu_count--;
		raw_spin_unlock(&c3_lock);
	}

	sched_clock_idle_wakeup_event(0);

	lapic_timer_state_broadcast(pr, cx, 0);
	return index;
}

开发者ID:AndroidGX，项目名称:SimpleGX-L-5.0.2_BOD6_G901F，代码行数:80，代码来源:processor_idle.c

示例10: acpi_idle_enter_bm

/**
 * acpi_idle_enter_bm - enters C3 with proper BM handling
 * @dev: the target CPU
 * @state: the state data
 *
 * If BM is detected, the deepest non-C3 idle state is entered instead.
 */
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
			      struct cpuidle_state *state)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
	u32 t1, t2;
	int sleep_ticks = 0;

	pr = __get_cpu_var(processors);

	if (unlikely(!pr))
		return 0;

	if (acpi_idle_suspend)
		return(acpi_idle_enter_c1(dev, state));

	if (acpi_idle_bm_check()) {
		if (dev->safe_state) {
			dev->last_state = dev->safe_state;
			return dev->safe_state->enter(dev, dev->safe_state);
		} else {
			local_irq_disable();
			acpi_safe_halt();
			local_irq_enable();
			return 0;
		}
	}

	local_irq_disable();
	current_thread_info()->status &= ~TS_POLLING;
	/*
	 * TS_POLLING-cleared state must be visible before we test
	 * NEED_RESCHED:
	 */
	smp_mb();

	if (unlikely(need_resched())) {
		current_thread_info()->status |= TS_POLLING;
		local_irq_enable();
		return 0;
	}

	acpi_unlazy_tlb(smp_processor_id());

	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	acpi_state_timer_broadcast(pr, cx, 1);

	/*
	 * disable bus master
	 * bm_check implies we need ARB_DIS
	 * !bm_check implies we need cache flush
	 * bm_control implies whether we can do ARB_DIS
	 *
	 * That leaves a case where bm_check is set and bm_control is
	 * not set. In that case we cannot do much, we enter C3
	 * without doing anything.
	 */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		spin_lock(&c3_lock);
		c3_cpu_count++;
		/* Disable bus master arbitration when all CPUs are in C3 */
		if (c3_cpu_count == num_online_cpus())
			acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
		spin_unlock(&c3_lock);
	} else if (!pr->flags.bm_check) {
		ACPI_FLUSH_CPU_CACHE();
	}

	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
	acpi_idle_do_entry(cx);
	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);

	/* Re-enable bus master arbitration */
	if (pr->flags.bm_check && pr->flags.bm_control) {
		spin_lock(&c3_lock);
		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
		c3_cpu_count--;
		spin_unlock(&c3_lock);
	}

#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
	/* TSC could halt in idle, so notify users */
	if (tsc_halts_in_c(ACPI_STATE_C3))
		mark_tsc_unstable("TSC halts in idle");
#endif
	sleep_ticks = ticks_elapsed(t1, t2);
	/* Tell the scheduler how much we idled: */
	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
//.........这里部分代码省略.........

开发者ID:10x-Amin，项目名称:x10_Th_kernel，代码行数:101，代码来源:processor_idle.c

示例11: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @state: the state data
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
				  struct cpuidle_state *state)
{
	struct acpi_processor *pr;
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
	u32 t1, t2;
	int sleep_ticks = 0;

	pr = __get_cpu_var(processors);

	if (unlikely(!pr))
		return 0;

	if (acpi_idle_suspend)
		return(acpi_idle_enter_c1(dev, state));

	local_irq_disable();
	current_thread_info()->status &= ~TS_POLLING;
	/*
	 * TS_POLLING-cleared state must be visible before we test
	 * NEED_RESCHED:
	 */
	smp_mb();

	if (unlikely(need_resched())) {
		current_thread_info()->status |= TS_POLLING;
		local_irq_enable();
		return 0;
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	acpi_state_timer_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);
	t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);

#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
	/* TSC could halt in idle, so notify users */
	if (tsc_halts_in_c(cx->type))
		mark_tsc_unstable("TSC halts in idle");;
#endif
	sleep_ticks = ticks_elapsed(t1, t2);

	/* Tell the scheduler how much we idled: */
	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);

	local_irq_enable();
	current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	acpi_state_timer_broadcast(pr, cx, 0);
	cx->time += sleep_ticks;
	return ticks_elapsed_in_us(t1, t2);
}

开发者ID:10x-Amin，项目名称:x10_Th_kernel，代码行数:69，代码来源:processor_idle.c

示例12: acpi_idle_enter_simple

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @index: the index of suggested state
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev, int index)
{
	struct acpi_processor *pr;
	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
	struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage);
	ktime_t  kt1, kt2;
	s64 idle_time;
	s64 sleep_ticks = 0;

	pr = __get_cpu_var(processors);
	dev->last_residency = 0;

	if (unlikely(!pr))
		return -EINVAL;

	local_irq_disable();

	if (acpi_idle_suspend) {
		local_irq_enable();
		cpu_relax();
		return -EBUSY;
	}

	if (cx->entry_method != ACPI_CSTATE_FFH) {
		current_thread_info()->status &= ~TS_POLLING;
		/*
		 * TS_POLLING-cleared state must be visible before we test
		 * NEED_RESCHED:
		 */
		smp_mb();
	}

	if (unlikely(need_resched())) {
		current_thread_info()->status |= TS_POLLING;
		local_irq_enable();
		return -EINVAL;
	}

	/*
	 * Must be done before busmaster disable as we might need to
	 * access HPET !
	 */
	lapic_timer_state_broadcast(pr, cx, 1);

	if (cx->type == ACPI_STATE_C3)
		ACPI_FLUSH_CPU_CACHE();

	kt1 = ktime_get_real();
	/* Tell the scheduler that we are going deep-idle: */
	sched_clock_idle_sleep_event();
	acpi_idle_do_entry(cx);
	kt2 = ktime_get_real();
	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));

	sleep_ticks = us_to_pm_timer_ticks(idle_time);

	/* Update device last_residency*/
	dev->last_residency = (int)idle_time;

	/* Tell the scheduler how much we idled: */
	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);

	local_irq_enable();
	current_thread_info()->status |= TS_POLLING;

	cx->usage++;

	lapic_timer_state_broadcast(pr, cx, 0);
	cx->time += idle_time;
	return index;
}

开发者ID:seyko2，项目名称:openvz_rhel6_kernel_mirror，代码行数:76，代码来源:processor_idle.c

示例13: omap3_enter_idle


//.........这里部分代码省略.........
#endif
		}

		/* Restore CAM and SGX. */
		if (PRCM_ON == cur_state.cam_state)
			prcm_transition_domain_to(DOM_CAM, PRCM_ON);
		if (PRCM_ON == cur_state.sgx_state)
			prcm_transition_domain_to(DOM_SGX, PRCM_ON);

		/* If we lost CORE context, restore it.
		 */
		if (target_state.core_state >= PRCM_CORE_OSWR_MEMRET) {
#ifdef CONFIG_OMAP34XX_OFFMODE
			context_restore_update(DOM_CORE1);
#endif
			prcm_restore_registers();
			prcm_restore_core_context(target_state.core_state);
#ifdef CONFIG_CORE_OFF
			omap3_restore_core_settings();
#endif
		}

		/* Restore DSS settings */
		if (omap2_disp_lpr_is_enabled()) {
			PM_WKEN_DSS      = pm_wken_dss;
			PM_PWSTCTRL_DSS  = pm_pwstctrl_dss;
			CM_CLKSTCTRL_DSS = cm_clkstctrl_dss;
			CM_FCLKEN_DSS    = cm_fclken_dss;
			CM_ICLKEN_DSS    = cm_iclken_dss;
			CM_AUTOIDLE_DSS  = cm_autoidle_dss;
		}

		/* At this point CORE and PER domain are back. We can release
		 * the console if we have it.
		 */
		if (got_console_lock) {
			release_console_sem();
		}

#ifdef CONFIG_OMAP_32K_TIMER
		/* Errata 1.4
		 * If a General Purpose Timer (GPTimer) is in posted mode
		 * (TSIRC.POSTED=1), due to internal resynchronizations, values
		 * read in TCRR, TCAR1 and TCAR2 registers right after the
		 * timer interface clock (L4) goes from stopped to active may
		 * not return the expected values. The most common event
		 * leading to this situation occurs upon wake up from idle.
		 *
		 * Software has to wait at least (2 timer interface clock
		 * cycles + 1 timer functional clock cycle) after L4 clock
		 * wakeup before reading TCRR, TCAR1 or TCAR2 registers for
		 * GPTimers in POSTED internal synchro- nization mode, and
		 * before reading WCRR register of the Watchdog timers . The
		 * same workaround must be applied before reading CR and
		 * 32KSYNCNT_REV registers of the synctimer module.
		 *
		 * Wait Period = 2 timer interface clock cycles +
		 *               1 timer functional clock cycle
		 * Interface clock  = L4 clock (50MHz worst case).
		 * Functional clock = 32KHz
		 * Wait Period = 2*10^-6/50 + 1/32768 = 0.000030557 = 30.557us
		 * Rounding off the delay value to a safer 50us.
		 */
		udelay(GPTIMER_WAIT_DELAY);
#endif

		/* Disable autoidling of GPT1.
		 */
		CM_AUTOIDLE_WKUP &= ~(0x1);
	}

	DPRINTK("MPU state:%x, CORE state:%x\n",
			PM_PREPWSTST_MPU, PM_PREPWSTST_CORE);

	/* Do wakeup event check s*/
	post_uart_activity();

	/* Update stats for sysfs entries.
	 */
	store_prepwst();

return_sleep_time:
	getnstimeofday(&ts_postidle);
#if defined(CONFIG_SYSFS) && defined(DEBUG_BAIL_STATS)
	ts_last_wake_up = ts_postidle;
#endif
	ts_idle = timespec_sub(ts_postidle, ts_preidle);

	if (cx->type > OMAP3_STATE_C2)
		sched_clock_idle_wakeup_event(timespec_to_ns(&ts_idle));


	DEBUG_STATE_PRINT(core_sleep_flg);


	local_irq_enable();
	local_fiq_enable();

	return (u32)timespec_to_ns(&ts_idle)/1000;
}

开发者ID:mozyg，项目名称:kernel，代码行数:101，代码来源:pm_cpuidle.c

注：本文中的sched_clock_idle_wakeup_event函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sched_clock_register函数代码示例发布时间：2022-05-30

C++ sched_clock_idle_sleep_event函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17948|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8507|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8410|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9301|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8374|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8357|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7359|2022-11-06

客服电话

电子邮件

C++ sched_clock_idle_wakeup_event函数代码示例

示例1: acpi_idle_enter_simple

示例2: acpi_idle_enter_simple

示例3: tick_nohz_stop_idle

示例4: tick_nohz_stop_idle

示例5: tick_nohz_stop_idle

示例6: acpi_idle_enter_simple

示例7: omap3_enter_idle

示例8: acpi_idle_enter_bm

示例9: acpi_idle_enter_bm

示例10: acpi_idle_enter_bm

示例11: acpi_idle_enter_simple

示例12: acpi_idle_enter_simple

示例13: omap3_enter_idle

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

geekammo/MicroView-Arduino-Library: Micr

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053