C++ sd_ble_gap_ppcp_set函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sd_ble_gap_ppcp_set函数的典型用法代码示例。如果您正苦于以下问题：C++ sd_ble_gap_ppcp_set函数的具体用法？C++ sd_ble_gap_ppcp_set怎么用？C++ sd_ble_gap_ppcp_set使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sd_ble_gap_ppcp_set函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ble_conn_params_init

uint32_t ble_conn_params_init(const ble_conn_params_init_t * p_init)
{
    uint32_t err_code;
    
    m_conn_params_config = *p_init;
    m_change_param = false;
    if (p_init->p_conn_params != NULL)
    {
        m_preferred_conn_params = *p_init->p_conn_params;
        
        // Set the connection params in stack
        err_code = sd_ble_gap_ppcp_set(&m_preferred_conn_params);
        if (err_code != NRF_SUCCESS)
        {
            return err_code;
        }
    }
    else
    {
        // Fetch the connection params from stack
        err_code = sd_ble_gap_ppcp_get(&m_preferred_conn_params);
        if (err_code != NRF_SUCCESS)
        {
            return err_code;
        }
    }

    m_conn_handle  = BLE_CONN_HANDLE_INVALID;
    m_update_count = 0;
    
    return app_timer_create(&m_conn_params_timer_id,
                            APP_TIMER_MODE_SINGLE_SHOT,
                            update_timeout_handler);
}

开发者ID:A-L-E-X，项目名称:nRF51822-Arduino，代码行数:34，代码来源:ble_conn_params.cpp

示例2: gap_params_init

/**@brief Function for the GAP initialization.
 *
 * @details This function shall be used to setup all the necessary GAP (Generic Access Profile)
 *          parameters of the device. It also sets the permissions.
 *
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
    
    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME, 
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);
    
    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    // Set GAP Peripheral Preferred Connection Parameters (converting connection interval from
    // milliseconds to required unit of 1.25ms).
    gap_conn_params.min_conn_interval = (4 * APP_CFG_CONNECTION_INTERVAL) / 5;
    gap_conn_params.max_conn_interval = (4 * APP_CFG_CONNECTION_INTERVAL) / 5;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}

开发者ID:tkadom，项目名称:TWBLE，代码行数:31，代码来源:main.c

示例3: gap_params_init

 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    char                    deviceaddr_name[16];
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    snprintf(&deviceaddr_name,14,"%s-%.4X%.2X\0",
        DEVICE_NAME,
        NRF_FICR->DEVICEADDR[0],
        NRF_FICR->DEVICEADDR[1]);

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)deviceaddr_name, strlen(deviceaddr_name));

    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_CYCLING_CADENCE_SENSOR);
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);

开发者ID:longcongduoi，项目名称:nRF51SDK，代码行数:31，代码来源:main.c

示例4: ble_conn_params_change_conn_params

uint32_t ble_conn_params_change_conn_params(ble_gap_conn_params_t * new_params)
{
    uint32_t err_code;

    m_preferred_conn_params = *new_params;
    // Set the connection params in stack
    err_code = sd_ble_gap_ppcp_set(&m_preferred_conn_params);
    if (err_code == NRF_SUCCESS)
    {
        if (!is_conn_params_ok(&m_current_conn_params))
        {
            m_change_param = true;
            err_code = sd_ble_gap_conn_param_update(m_conn_handle, &m_preferred_conn_params);
            m_update_count = 1;
        }
        else
        {
            // Notify the application that the procedure has succeded
            if (m_conn_params_config.evt_handler != NULL)
            {
                ble_conn_params_evt_t evt;

                evt.evt_type = BLE_CONN_PARAMS_EVT_SUCCEEDED;
                m_conn_params_config.evt_handler(&evt);
            }
            err_code = NRF_SUCCESS;
        }
    }
    return err_code;
}

开发者ID:0xc0170，项目名称:mbed，代码行数:30，代码来源:ble_conn_params.cpp

示例5: gap_ppcp_set_handle

/**@brief Function for decoding a command packet with RPC_SD_BLE_GAP_PPCP_SET opcode.
 *
 * This function will decode the command, call the BLE Stack API, and also send command response
 * to the peer through the the transport layer.
 *
 * @param[in] p_command         The encoded structure that needs to be decoded and passed on
 *                              to the BLE Stack API.
 * @param[in] command_len       The length of the encoded command read from transport layer.
 *
 * @retval NRF_SUCCESS               If the decoding of the command was successful, the SoftDevice
 *                                   API was called, and the command response was sent to peer,
 *                                   otherwise an error code.
 * @retval NRF_ERROR_INVALID_LENGTH  If the content length of the packet is not conforming to the
 *                                   codec specification.
 */
static uint32_t gap_ppcp_set_handle(uint8_t * p_command, uint32_t command_len)
{
    uint32_t              err_code;
    ble_gap_conn_params_t conn_params;

    uint32_t                index        = 0;
    ble_gap_conn_params_t * p_conn_param = NULL;

    if (p_command[index++] == RPC_BLE_FIELD_PRESENT)
    {
        conn_params.min_conn_interval   = uint16_decode(&p_command[index]);
        index += sizeof(uint16_t);

        conn_params.max_conn_interval   = uint16_decode(&p_command[index]);
        index += sizeof(uint16_t);

        conn_params.slave_latency       = uint16_decode(&p_command[index]);
        index += sizeof(uint16_t);

        conn_params.conn_sup_timeout    = uint16_decode(&p_command[index]);
        p_conn_param = &conn_params;
    }
    
    RPC_DECODER_LENGTH_CHECK(command_len, index, SD_BLE_GAP_PPCP_SET);

    err_code = sd_ble_gap_ppcp_set(p_conn_param);

    return ble_rpc_cmd_resp_send(SD_BLE_GAP_PPCP_SET, err_code);
}

开发者ID:huiyue000，项目名称:51822，代码行数:44，代码来源:ble_rpc_cmd_decoder_gap.c

示例6: gap_params_init

/**@brief     Function for the GAP initialization.
 *
 * @details   This function will setup all the necessary GAP (Generic Access Profile) parameters of
 *            the device. It also sets the permissions and appearance.
 */
static uint32_t gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params = {0};
    ble_gap_conn_sec_mode_t sec_mode;


    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = gap_address_change();
    VERIFY_SUCCESS(err_code);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    VERIFY_SUCCESS(err_code);

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    return err_code;
}

开发者ID:CWBudde，项目名称:Espruino，代码行数:30，代码来源:nrf_ble_dfu.c

示例7: gap_params_init

// gap name/appearance/connection parameters
static void gap_params_init (void) {
    uint32_t                err_code;
    ble_gap_conn_sec_mode_t sec_mode;
    ble_gap_conn_params_t   gap_conn_params;

    // Full strength signal
    sd_ble_gap_tx_power_set(4);

    // Let anyone connect and set the name given the platform
    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
    err_code = sd_ble_gap_device_name_set(&sec_mode,
            (const uint8_t *)"BEES", strlen("BEES"));
            //(const uint8_t *)DEVICE_NAME, strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    // Not sure what this is useful for, but why not set it
    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_COMPUTER);
    APP_ERROR_CHECK(err_code);

    // Specify parameters for a connection
    memset(&gap_conn_params, 0, sizeof(gap_conn_params));
    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}

开发者ID:azhn，项目名称:smartbike，代码行数:30，代码来源:main.c

示例8: gap_params_init

/**@brief Function for the GAP initialization.
 *
 * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
 *          device including the device name, appearance, and the preferred connection parameters.
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    /* YOUR_JOB: Use an appearance value matching the application's use case.
    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_);
    APP_ERROR_CHECK(err_code); */

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}

开发者ID:eqot，项目名称:ble_app_template，代码行数:32，代码来源:main.c

示例9: gap_params_init

/**@brief   Function for the GAP initialization.
 *
 * @details This function will setup all the necessary GAP (Generic Access Profile)
 *          parameters of the device. It also sets the permissions and appearance.
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
    
    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *) DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);

    // Add static pin:
	uint8_t passkey[] = STATIC_PASSKEY;
	m_static_pin_option.gap.passkey.p_passkey = passkey;
	err_code =  sd_ble_opt_set(BLE_GAP_OPT_PASSKEY, &m_static_pin_option);
	APP_ERROR_CHECK(err_code);
}

开发者ID:chronosfitness，项目名称:nRF51-ble-app-uart-static-passkey，代码行数:34，代码来源:main.c

示例10: gap_params_init

/**@brief Function for the GAP initialization.
 *
 * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
 *          device including the device name, appearance, and the preferred connection parameters.
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_KEYRING);
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_tx_power_set(TX_POWER_LEVEL);
    APP_ERROR_CHECK(err_code);
}

开发者ID:RobinLin，项目名称:Espruino，代码行数:34，代码来源:main.c

示例11: gap_params_init

/**@brief Function for the GAP initialization.
 *
 * @details This function shall be used to setup all the necessary GAP (Generic Access Profile)
 * parameters of the device. It also sets the permissions and appearance.
 */
static void gap_params_init(void) {
	uint32_t err_code;
	ble_gap_conn_params_t gap_conn_params;
	ble_gap_conn_sec_mode_t sec_mode;

	BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
	err_code = sd_ble_gap_device_name_set(&sec_mode, DEVICE_NAME,
			strlen(DEVICE_NAME));
	APP_ERROR_CHECK(err_code);

	static const unsigned ADDR_LEN = 6;
	const uint8_t address[] = { 0xe7, 0xAA, 0xAA, 0xAA, 0xAA, 0xAB };
	ble_gap_addr_t dev_addr;
	dev_addr.addr_type = ADDR_TYPE_PUBLIC;
	memcpy(dev_addr.addr, address, ADDR_LEN);
	err_code = sd_ble_gap_address_set(&dev_addr);
	APP_ERROR_CHECK(err_code);

	memset(&gap_conn_params, 0, sizeof(gap_conn_params));

	gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
	gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
	gap_conn_params.slave_latency = SLAVE_LATENCY;
	gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT;

	err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
	APP_ERROR_CHECK(err_code);
}

开发者ID:Joisar，项目名称:BLE-NRF51822-LBS-ANDROID，代码行数:33，代码来源:main.c

示例12: BLE_GAP_CONN_SEC_MODE_SET_OPEN

//This function configures the Generic access Profile
//GAP is a service that must be implemented on all BLE devices
//These are some basic values that other devices can request
//Some of these values might be writable over the air
//The current characteristics are
//		Device name
//		Appearance
//		Peripheral Preferred Connection Parameters
void GAPController::bleConfigureGAP(){
	u32 err = 0;
	//Set up an open link write permission
	//There are multiple security modes defined in the BLE spec
	//Use these macros: http://developer.nordicsemi.com/nRF51_SDK/doc/7.1.0/s110/html/a00813.html
	ble_gap_conn_sec_mode_t secPermissionOpen;
	BLE_GAP_CONN_SEC_MODE_SET_OPEN(&secPermissionOpen);

	//Set the GAP device name
	err = sd_ble_gap_device_name_set(&secPermissionOpen, (u8*)DEVICE_NAME, strlen(DEVICE_NAME));
	APP_ERROR_CHECK(err);

	//Set the appearance of the device as defined in http://developer.nordicsemi.com/nRF51_SDK/doc/7.1.0/s110/html/a00837.html
	err = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_COMPUTER);
	APP_ERROR_CHECK(err);

	//Set gap peripheral preferred connection parameters (not used by the mesh implementation)
	ble_gap_conn_params_t gapConnectionParams;
	memset(&gapConnectionParams, 0, sizeof(gapConnectionParams));
	gapConnectionParams.min_conn_interval = Config->meshMinConnectionInterval;
	gapConnectionParams.max_conn_interval = Config->meshMaxConnectionInterval;
	gapConnectionParams.slave_latency = Config->meshPeripheralSlaveLatency;
	gapConnectionParams.conn_sup_timeout = Config->meshConnectionSupervisionTimeout;
	err = sd_ble_gap_ppcp_set(&gapConnectionParams);
	APP_ERROR_CHECK(err);


}

开发者ID:Pady005，项目名称:fruitymesh，代码行数:36，代码来源:GAPController.cpp

示例13: gap_params_init

////////////////////////////////////////////////////////////////////////////////
//
// GAP Initialization
static void gap_params_init(void)
{
	// Create the scan response name
	memset(_scanResponse, 0, sizeof(_scanResponse));
	memcpy(_scanResponse, SCAN_RESPONSE_BASE, strlen(SCAN_RESPONSE_BASE));
	memcpy(_scanResponse + strlen(SCAN_RESPONSE_BASE), STR(BUILD_NUM), 4);

    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)_scanResponse,
                                          strlen(_scanResponse));
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_UNKNOWN);
    APP_ERROR_CHECK(err_code);

	err_code = sd_ble_gap_tx_power_set(4);
	APP_ERROR_CHECK(err_code);							  
    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}

开发者ID:skywavedesign，项目名称:swd_nrf51_s110_qt_template，代码行数:36，代码来源:custom_profile.c

示例14: gap_params_init

/**@brief Function for the GAP initialization.
 *
 * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
 *          device including the device name, appearance, and the preferred connection parameters.
 */
static void gap_params_init(void)
{
	uint32_t                err_code;
	ble_gap_conn_params_t   gap_conn_params;
	ble_gap_conn_sec_mode_t sec_mode;
	ble_gap_addr_t device_mac;

#ifdef RANDOM_MAC
	device_mac.addr_type = BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE;
	err_code = sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_AUTO, &device_mac);
#else
	uint8_t mac_addr[] = {0x00,0x19,0x25,0x39,0x54,0x95};
	device_mac.addr_type = BLE_GAP_ADDR_TYPE_PUBLIC;
	memcpy(device_mac.addr, mac_addr,6);
	err_code = sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &device_mac);
	APP_ERROR_CHECK(err_code);
#endif
	BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
	err_code = sd_ble_gap_device_name_set(&sec_mode,
			(const uint8_t *)DEVICE_NAME,
			strlen(DEVICE_NAME));
	APP_ERROR_CHECK(err_code);
	err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_TAG);
	APP_ERROR_CHECK(err_code);
	memset(&gap_conn_params, 0, sizeof(gap_conn_params));
	gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
	gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
	gap_conn_params.slave_latency     = SLAVE_LATENCY;
	gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;
	err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
	APP_ERROR_CHECK(err_code);
	err_code = sd_ble_gap_tx_power_set(4);
	APP_ERROR_CHECK(err_code);
}

开发者ID:jack23912，项目名称:mtconnect04-examples，代码行数:39，代码来源:main.c

示例15: conn_mw_ble_gap_ppcp_set

uint32_t conn_mw_ble_gap_ppcp_set(uint8_t const * const p_rx_buf,
                                 uint32_t              rx_buf_len,
                                 uint8_t * const       p_tx_buf,
                                 uint32_t * const      p_tx_buf_len)
{
   SER_ASSERT_NOT_NULL(p_rx_buf);
   SER_ASSERT_NOT_NULL(p_tx_buf);
   SER_ASSERT_NOT_NULL(p_tx_buf_len);

   ble_gap_conn_params_t   conn_params;
   ble_gap_conn_params_t * p_conn_params = &conn_params;

   uint32_t err_code = NRF_SUCCESS;
   uint32_t sd_err_code;

   err_code = ble_gap_ppcp_set_req_dec(p_rx_buf, rx_buf_len, &p_conn_params);
   SER_ASSERT(err_code == NRF_SUCCESS, err_code);

   sd_err_code = sd_ble_gap_ppcp_set(p_conn_params);

   err_code = ble_gap_ppcp_set_rsp_enc(sd_err_code, p_tx_buf, p_tx_buf_len);
   SER_ASSERT(err_code == NRF_SUCCESS, err_code);

   return err_code;
}

开发者ID:BLEHexapod，项目名称:nrf_sdk，代码行数:25，代码来源:conn_mw_ble_gap.c

示例16: gap_params_init

// Function for the GAP initialization.
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);
    
    const char deviceName[] = "RGB LED";

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *) deviceName,
                                          strlen(deviceName));
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MSEC_TO_UNITS(20, UNIT_1_25_MS);
    gap_conn_params.max_conn_interval = MSEC_TO_UNITS(75, UNIT_1_25_MS);
    gap_conn_params.slave_latency     = 0;
    gap_conn_params.conn_sup_timeout  = MSEC_TO_UNITS(4000, UNIT_10_MS);

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);
}

开发者ID:electronut，项目名称:nRF51-RGB-LED-test，代码行数:26，代码来源:main.c

示例17: ASSERT_INT

ble_error_t nRF5xGap::setPreferredConnectionParams(const ConnectionParams_t *params)
{
    ASSERT_INT(NRF_SUCCESS,
        sd_ble_gap_ppcp_set(reinterpret_cast<const ble_gap_conn_params_t *>(params)),
        BLE_ERROR_PARAM_OUT_OF_RANGE);

    return BLE_ERROR_NONE;
}

开发者ID:AlessandroA，项目名称:mbed，代码行数:8，代码来源:nRF5xGap.cpp

示例18: bluetooth_init

static void bluetooth_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gppcp;
    ble_advdata_t           advdata;
    ble_gap_conn_sec_mode_t sec_mode;
    uint8_t                 flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;

    // Initialise SoftDevice, and enable BLE event interrupt.
    BLE_STACK_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM,
                           BLE_L2CAP_MTU_DEF,
                           ble_evt_dispatch,
                           false);

    // Set GAP parameters
    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode, DEVICE_NAME, strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_TAG);
    APP_ERROR_CHECK(err_code);

    memset(&gppcp, 0, sizeof(gppcp));

    gppcp.min_conn_interval = MIN_CONN_INTERVAL;
    gppcp.max_conn_interval = MAX_CONN_INTERVAL;
    gppcp.slave_latency     = SLAVE_LATENCY;
    gppcp.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gppcp);
    APP_ERROR_CHECK(err_code);

    // Build and set advertising data.
    memset(&advdata, 0, sizeof(advdata));

    advdata.name_type          = BLE_ADVDATA_FULL_NAME;
    advdata.include_appearance = true;
    advdata.flags.size         = sizeof(flags);
    advdata.flags.p_data       = &flags;

    err_code = ble_advdata_set(&advdata, NULL);
    APP_ERROR_CHECK(err_code);

    // Initialise advertising parameters (used when starting advertising).
    memset(&m_adv_params, 0, sizeof(m_adv_params));

    m_adv_params.type        = BLE_GAP_ADV_TYPE_ADV_IND;
    m_adv_params.p_peer_addr = NULL;                           // Undirected advertisement.
    m_adv_params.fp          = BLE_GAP_ADV_FP_ANY;
    m_adv_params.interval    = APP_ADV_INTERVAL;
    m_adv_params.timeout     = APP_ADV_TIMEOUT_IN_SECONDS;

    // Start advertising when entering main loop.
    m_start_adv_flag = true;
}

开发者ID:rpi-fongming，项目名称:nolem_m2d，代码行数:56，代码来源:main.c

示例19: gap_params_init

/**@brief Function for the GAP initialization.
 *
 * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the
 *          device including the device name, appearance, and the preferred connection parameters.
 */
static void gap_params_init(void)
{
    uint32_t                err_code;
    ble_gap_conn_params_t   gap_conn_params;
    ble_gap_conn_sec_mode_t sec_mode;

    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode);

    err_code = sd_ble_gap_device_name_set(&sec_mode,
                                          (const uint8_t *)DEVICE_NAME,
                                          strlen(DEVICE_NAME));
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_UNKNOWN);
    APP_ERROR_CHECK(err_code);

    memset(&gap_conn_params, 0, sizeof(gap_conn_params));

    gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL;
    gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL;
    gap_conn_params.slave_latency     = SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  = CONN_SUP_TIMEOUT;

    err_code = sd_ble_gap_ppcp_set(&gap_conn_params);
    APP_ERROR_CHECK(err_code);

    err_code = sd_ble_gap_tx_power_set(INITIAL_TX_POWER_LEVEL);
    APP_ERROR_CHECK(err_code);

    ble_opt_t ble_opt;
    uint8_t passkey[6] = { 0 };
    
    // Fetch pin from UICR
    uint8_t val = (*((uint32_t *)UICR_PIN_ADDRESS)) & 0x000000FF;
    passkey[0] = (val == 0xFF) ? 0x31 : val;
    
    val = ((*((uint32_t *)UICR_PIN_ADDRESS)) & 0x0000FF00) >> 8;
    passkey[1] = (val == 0xFF) ? 0x32 : val;
    
    val = ((*((uint32_t *)UICR_PIN_ADDRESS)) & 0x00FF0000) >> 16;
    passkey[2] = (val == 0xFF) ? 0x33 : val;
    
    val = ((*((uint32_t *)UICR_PIN_ADDRESS)) & 0xFF000000) >> 24;
    passkey[3] = (val == 0xFF) ? 0x34 : val;
    
    val = (*((uint32_t *)(UICR_PIN_ADDRESS+4))) & 0x000000FF;
    passkey[4] = (val == 0xFF) ? 0x35 : val;
    
    val = ((*((uint32_t *)(UICR_PIN_ADDRESS+4))) & 0x0000FF00) >> 8;
    passkey[5] = (val == 0xFF) ? 0x36 : val;
    
    ble_opt.gap_opt.passkey.p_passkey = passkey;
    err_code = sd_ble_opt_set(BLE_GAP_OPT_PASSKEY, &ble_opt);
    APP_ERROR_CHECK(err_code);
}

开发者ID:t21，项目名称:HomeHub，代码行数:60，代码来源:main.c

示例20: btle_gap_init

error_t btle_gap_init(void)
{
    ble_gap_conn_params_t gap_conn_params = {0};

    gap_conn_params.min_conn_interval = msec_to_1_25msec(
                                            CFG_GAP_CONNECTION_MIN_INTERVAL_MS);  // in 1.25ms units
    gap_conn_params.max_conn_interval = msec_to_1_25msec(
                                            CFG_GAP_CONNECTION_MAX_INTERVAL_MS);  // in 1.25ms unit
    gap_conn_params.slave_latency     = CFG_GAP_CONNECTION_SLAVE_LATENCY;
    gap_conn_params.conn_sup_timeout  =
        CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS / 10; // in 10ms unit

    ble_gap_conn_sec_mode_t sec_mode;
    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); // no security is needed

    // ASSERT_STATUS( sd_ble_gap_device_name_set(&sec_mode,   //_modify
                   // (const uint8_t *)
                   // CFG_GAP_LOCAL_NAME,
                   // strlen(CFG_GAP_LOCAL_NAME)));
    // ASSERT_STATUS( sd_ble_gap_appearance_set(CFG_GAP_APPEARANCE));
    // ASSERT_STATUS( sd_ble_gap_ppcp_set(&gap_conn_params));
    // ASSERT_STATUS( sd_ble_gap_tx_power_set(CFG_BLE_TX_POWER_LEVEL));
    nrf_err_check( sd_ble_gap_device_name_set(&sec_mode,  
                   (const uint8_t *)
                   CFG_GAP_LOCAL_NAME,
                   strlen(CFG_GAP_LOCAL_NAME)) );
    nrf_err_check( sd_ble_gap_appearance_set(CFG_GAP_APPEARANCE) );
    nrf_err_check( sd_ble_gap_ppcp_set(&gap_conn_params) );
    nrf_err_check( sd_ble_gap_tx_power_set(CFG_BLE_TX_POWER_LEVEL) );
    
    /* Connection Parameters */
    enum {
        FIRST_UPDATE_DELAY = APP_TIMER_TICKS(5000, CFG_TIMER_PRESCALER),
        NEXT_UPDATE_DELAY  = APP_TIMER_TICKS(5000, CFG_TIMER_PRESCALER),
        MAX_UPDATE_COUNT   = 3
    };

    ble_conn_params_init_t cp_init = {0};

    cp_init.p_conn_params                  = NULL;
    cp_init.first_conn_params_update_delay = FIRST_UPDATE_DELAY;
    cp_init.next_conn_params_update_delay  = NEXT_UPDATE_DELAY;
    cp_init.max_conn_params_update_count   = MAX_UPDATE_COUNT;
    cp_init.start_on_notify_cccd_handle    = BLE_GATT_HANDLE_INVALID;
    cp_init.disconnect_on_fail             = true;
    cp_init.evt_handler                    = NULL;
    cp_init.error_handler                  = error_callback;

    //ASSERT_STATUS ( ble_conn_params_init(&cp_init));   //_modify
    nrf_err_check( ble_conn_params_init(&cp_init) );
    
    return ERROR_NONE;
}

开发者ID:A-L-E-X，项目名称:nRF51822-Arduino，代码行数:53，代码来源:btle_gap.cpp

注：本文中的sd_ble_gap_ppcp_set函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sd_ble_gap_sec_params_reply函数代码示例发布时间：2022-05-30

C++ sd_ble_gap_disconnect函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17948|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9562|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8126|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8507|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8410|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9301|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8374|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7805|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8357|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7359|2022-11-06

客服电话

电子邮件

C++ sd_ble_gap_ppcp_set函数代码示例

示例1: ble_conn_params_init

示例2: gap_params_init

示例3: gap_params_init

示例4: ble_conn_params_change_conn_params

示例5: gap_ppcp_set_handle

示例6: gap_params_init

示例7: gap_params_init

示例8: gap_params_init

示例9: gap_params_init

示例10: gap_params_init

示例11: gap_params_init

示例12: BLE_GAP_CONN_SEC_MODE_SET_OPEN

示例13: gap_params_init

示例14: gap_params_init

示例15: conn_mw_ble_gap_ppcp_set

示例16: gap_params_init

示例17: ASSERT_INT

示例18: bluetooth_init

示例19: gap_params_init

示例20: btle_gap_init

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

geekammo/MicroView-Arduino-Library: Micr

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053