本文整理汇总了C++中sd_ble_gap_sec_params_reply函数的典型用法代码示例。如果您正苦于以下问题：C++ sd_ble_gap_sec_params_reply函数的具体用法？C++ sd_ble_gap_sec_params_reply怎么用？C++ sd_ble_gap_sec_params_reply使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了sd_ble_gap_sec_params_reply函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: gap_sec_params_reply_handle
/**@brief Function for decoding a command packet with RPC_SD_BLE_GAP_SEC_PARAMS_REPLY opcode.
*
* This function will decode the command, call the BLE Stack API, and also send command response
* to the peer through the the transport layer.
*
* @param[in] p_command The encoded structure that needs to be decoded and passed on
* to the BLE Stack API.
* @param[in] command_len The length of the encoded command read from transport layer.
*
* @retval NRF_SUCCESS If the decoding of the command was successful, the SoftDevice
* API was called, and the command response was sent to peer,
* otherwise an error code.
* @retval NRF_ERROR_INVALID_LENGTH If the content length of the packet is not conforming to the
* codec specification.
*/
static uint32_t gap_sec_params_reply_handle(const uint8_t * const p_command, uint32_t command_len)
{
uint8_t sec_status;
uint16_t conn_handle;
uint32_t err_code;
ble_gap_sec_params_t sec_params;
uint32_t index = 0;
ble_gap_sec_params_t * p_sec_param = NULL;
conn_handle = uint16_decode(&p_command[index]);
index += sizeof(uint16_t);
RPC_DECODER_LENGTH_CHECK(command_len, index, SD_BLE_GAP_SEC_PARAMS_REPLY);
sec_status = p_command[index++];
RPC_DECODER_LENGTH_CHECK(command_len, index, SD_BLE_GAP_SEC_PARAMS_REPLY);
if (p_command[index++] == RPC_BLE_FIELD_PRESENT)
{
index += sec_params_decode(&p_command[index], &sec_params);
p_sec_param = &sec_params;
}
else
{
p_sec_param = NULL;
}
RPC_DECODER_LENGTH_CHECK(command_len, index, SD_BLE_GAP_SEC_PARAMS_REPLY);
err_code = sd_ble_gap_sec_params_reply(conn_handle, sec_status, p_sec_param);
return ble_rpc_cmd_resp_send(SD_BLE_GAP_SEC_PARAMS_REPLY, err_code);
}
开发者ID:huiyue000，项目名称:51822，代码行数:48，代码来源:ble_rpc_cmd_decoder_gap.c
示例2: conn_mw_ble_gap_sec_params_reply
uint32_t conn_mw_ble_gap_sec_params_reply(uint8_t const * const p_rx_buf,
uint32_t rx_buf_len,
uint8_t * const p_tx_buf,
uint32_t * const p_tx_buf_len)
{
SER_ASSERT_NOT_NULL(p_rx_buf);
SER_ASSERT_NOT_NULL(p_tx_buf);
SER_ASSERT_NOT_NULL(p_tx_buf_len);
uint32_t err_code = NRF_SUCCESS;
uint32_t sd_err_code;
uint16_t conn_handle;
uint8_t sec_status;
ble_gap_sec_params_t sec_params;
ble_gap_sec_params_t * p_sec_params = &sec_params;
err_code = ble_gap_sec_params_reply_req_dec(p_rx_buf,
rx_buf_len,
&conn_handle,
&sec_status,
&p_sec_params);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
sd_err_code = sd_ble_gap_sec_params_reply(conn_handle, sec_status, p_sec_params);
err_code = ble_gap_sec_params_reply_rsp_enc(sd_err_code, p_tx_buf, p_tx_buf_len);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
return err_code;
}
开发者ID:451506709，项目名称:automated_machine，代码行数:32，代码来源:conn_mw_ble_gap.c
示例3: ble_gap_event_handler
static void ble_gap_event_handler(ble_evt_t* evt)
{
switch (evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
break;
case BLE_GAP_EVT_DISCONNECTED:
sd_ble_gap_adv_start(&ble_adv_params);
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
APP_ERROR_CHECK(sd_ble_gap_sec_params_reply(evt->evt.gap_evt.conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS, &ble_gap_bond_params));
break;
case BLE_GAP_EVT_CONN_SEC_UPDATE:
break;
case BLE_GAP_EVT_AUTH_STATUS:
break;
default:
break;
}
}
开发者ID:Eppo791906066，项目名称:nRF51-ble-bcast-mesh，代码行数:26，代码来源:nrf_adv_conn.c
示例4: conn_mw_ble_gap_sec_params_reply
uint32_t conn_mw_ble_gap_sec_params_reply(uint8_t const * const p_rx_buf,
uint32_t rx_buf_len,
uint8_t * const p_tx_buf,
uint32_t * const p_tx_buf_len)
{
SER_ASSERT_NOT_NULL(p_rx_buf);
SER_ASSERT_NOT_NULL(p_tx_buf);
SER_ASSERT_NOT_NULL(p_tx_buf_len);
uint32_t err_code = NRF_SUCCESS;
uint32_t sd_err_code;
uint32_t sec_tab_index = 0;
uint16_t * p_conn_handle;
uint8_t sec_status;
ble_gap_sec_params_t sec_params;
ble_gap_sec_params_t * p_sec_params = &sec_params;
// Allocate global security context for soft device
err_code = conn_ble_gap_sec_context_create(&sec_tab_index);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
p_conn_handle = &(m_conn_keys_table[sec_tab_index].conn_handle);
// Set up global structure for command decoder
ble_gap_sec_keyset_t * p_sec_keyset = &(m_conn_keys_table[sec_tab_index].keyset);
p_sec_keyset->keys_own.p_enc_key = &(m_conn_keys_table[sec_tab_index].enc_key_own);
p_sec_keyset->keys_own.p_id_key = &(m_conn_keys_table[sec_tab_index].id_key_own);
p_sec_keyset->keys_own.p_sign_key = &(m_conn_keys_table[sec_tab_index].sign_key_own);
p_sec_keyset->keys_own.p_pk = &(m_conn_keys_table[sec_tab_index].pk_own);
p_sec_keyset->keys_peer.p_enc_key = &(m_conn_keys_table[sec_tab_index].enc_key_peer);
p_sec_keyset->keys_peer.p_id_key = &(m_conn_keys_table[sec_tab_index].id_key_peer);
p_sec_keyset->keys_peer.p_sign_key = &(m_conn_keys_table[sec_tab_index].sign_key_peer);
p_sec_keyset->keys_peer.p_pk = &(m_conn_keys_table[sec_tab_index].pk_peer);
err_code = ble_gap_sec_params_reply_req_dec(p_rx_buf,
rx_buf_len,
p_conn_handle,
&sec_status,
&p_sec_params,
&p_sec_keyset);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
if (p_sec_keyset == NULL)
{
//If no keyset was sent destroy the context.
err_code = conn_ble_gap_sec_context_destroy(*p_conn_handle);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
}
sd_err_code = sd_ble_gap_sec_params_reply(*p_conn_handle, sec_status, p_sec_params, p_sec_keyset);
err_code = ble_gap_sec_params_reply_rsp_enc(sd_err_code, p_tx_buf, p_tx_buf_len, p_sec_keyset);
SER_ASSERT(err_code == NRF_SUCCESS, err_code);
return err_code;
}
开发者ID:kiibohd，项目名称:controller，代码行数:57，代码来源:conn_mw_ble_gap.c
示例5: on_ble_evt
static void on_ble_evt(ble_evt_t * p_ble_evt){
uint32_t err_code;
switch (p_ble_evt->header.evt_id){
case BLE_GAP_EVT_CONNECTED:
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
enable_hr_rdy_interrupt();
break;
case BLE_GAP_EVT_DISCONNECTED:
m_conn_handle = BLE_CONN_HANDLE_INVALID;
disable_hr_rdy_interrupt();
advertising_start();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT){
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
default:
break;
}
}
开发者ID:augustio，项目名称:heart_rate_sensor，代码行数:33，代码来源:main.c
示例6: on_ble_evt
/**@brief Function for the application's SoftDevice event handler.
*
* @param[in] p_ble_evt SoftDevice event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
APP_ERROR_CHECK(err_code);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
// No system attributes have been stored.
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
开发者ID:monpetit，项目名称:inventus-factory-examples，代码行数:39，代码来源:main.c
示例7: on_ble_peripheral_evt
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_peripheral_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
LEDS_OFF(PERIPHERAL_ADVERTISING_LED);
LEDS_ON(PERIPHERAL_CONNECTED_LED);
m_conn_handle_peripheral = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
LEDS_OFF(PERIPHERAL_CONNECTED_LED);
m_conn_handle_peripheral = BLE_CONN_HANDLE_INVALID;
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(m_conn_handle_peripheral, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle_peripheral, NULL, 0, BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
开发者ID:451506709，项目名称:automated_machine，代码行数:37，代码来源:main.c
示例8: on_ble_evt
/**@brief Application's Stack BLE event handler.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
nrf_gpio_pin_set(CONNECTED_LED_PIN_NO);
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
nrf_gpio_pin_clear(CONNECTED_LED_PIN_NO);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
// Need to close the ANT channel to make it safe to write bonding information to flash
err_code = sd_ant_channel_close(ANT_HRMRX_ANT_CHANNEL);
APP_ERROR_CHECK(err_code);
// Note: Bonding information will be stored, advertising will be restarted and the
// ANT channel will be reopened when ANT event CHANNEL_CLOSED is received.
break;
#ifndef BONDING_ENABLE
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP,
NULL);
#endif // BONDING_ENABLE
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
{
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
// Go to system-off mode (this function will not return; wakeup will cause a reset)
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
#ifndef BONDING_ENABLE
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
APP_ERROR_CHECK(err_code);
break;
#endif // BONDING_ENABLE
default:
// No implementation needed.
break;
}
}
开发者ID:DroneBucket，项目名称:Drone_Bucket_CrazyFlie2_NRF_Firmware，代码行数:60，代码来源:main.c
示例9: on_ble_evt
/**@brief Function for the Application's S110 SoftDevice event handler.
*
* @param[in] p_ble_evt S110 SoftDevice event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
nrf_gpio_pin_set(CONNECTED_LED_PIN_NO);
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
m_is_advertising = false;
break;
case BLE_GAP_EVT_DISCONNECTED:
nrf_gpio_pin_clear(CONNECTED_LED_PIN_NO);
if (!m_tear_down_in_progress)
{
// The Disconnected event is because of an external event. (Link loss or
// disconnect triggered by the DFU Controller before the firmware update was
// complete).
// Restart advertising so that the DFU Controller can reconnect if possible.
advertising_start();
}
m_conn_handle = BLE_CONN_HANDLE_INVALID;
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_TIMEOUT:
if (p_ble_evt->evt.gatts_evt.params.timeout.src == BLE_GATT_TIMEOUT_SRC_PROTOCOL)
{
err_code = sd_ble_gap_disconnect(m_conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
}
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
开发者ID:AveryLouie，项目名称:flashware，代码行数:60，代码来源:dfu_transport_ble.c
示例10: on_ble_evt
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
led_stop();
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
// Initialize the current heart rate to the average of max and min values. So that
// everytime a new connection is made, the heart rate starts from the same value.
m_cur_heart_rate = (MAX_HEART_RATE + MIN_HEART_RATE) / 2;
// Start timers used to generate battery and HR measurements.
application_timers_start();
// Start handling button presses
err_code = app_button_enable();
break;
case BLE_GAP_EVT_DISCONNECTED:
// Since we are not in a connection and have not started advertising, store bonds
err_code = ble_bondmngr_bonded_masters_store();
APP_ERROR_CHECK(err_code);
// Go to system-off mode, should not return from this function, wakeup will trigger
// a reset.
system_off_mode_enter();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
{
led_stop();
GPIO_WAKEUP_BUTTON_CONFIG(HR_INC_BUTTON_PIN_NO);
GPIO_WAKEUP_BUTTON_CONFIG(HR_DEC_BUTTON_PIN_NO);
system_off_mode_enter();
}
break;
default:
break;
}
APP_ERROR_CHECK(err_code);
}
开发者ID:Dalocklei，项目名称:Wearable-Pedometer，代码行数:59，代码来源:main.c
示例11: on_ble_evt
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
static ble_gap_evt_auth_status_t m_auth_status;
ble_gap_enc_info_t * p_enc_info;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
led_off(LED);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
m_conn_handle = BLE_CONN_HANDLE_INVALID;
advertising_start();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_AUTH_STATUS:
m_auth_status = p_ble_evt->evt.gap_evt.params.auth_status;
break;
case BLE_GAP_EVT_SEC_INFO_REQUEST:
p_enc_info = &m_auth_status.periph_keys.enc_info;
if (p_enc_info->div == p_ble_evt->evt.gap_evt.params.sec_info_request.div)
{
err_code = sd_ble_gap_sec_info_reply(m_conn_handle, p_enc_info, NULL);
APP_ERROR_CHECK(err_code);
}
else
{
// No keys found for this device
err_code = sd_ble_gap_sec_info_reply(m_conn_handle, NULL, NULL);
APP_ERROR_CHECK(err_code);
}
break;
default:
// No implementation needed.
break;
}
}
开发者ID:Books305，项目名称:twiz-fw，代码行数:58，代码来源:twi_ble_evt.c
示例12: on_ble_evt
/**@brief Application's BLE Stack event handler.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
led_stop();
led1_on();
connected = true;
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
// Start handling button presses
//err_code = app_button_enable();
break;
case BLE_GAP_EVT_DISCONNECTED:
// Since we are not in a connection and have not started advertising, store bonds
err_code = ble_bondmngr_bonded_masters_store();
APP_ERROR_CHECK(err_code);
led1_off();
connected = false;
// Go to system-off mode, should not return from this function, wakeup will trigger
// a reset.
//system_off_mode_enter();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
{
led_stop();
//system_off_mode_enter();
}
break;
default:
break;
}
APP_ERROR_CHECK(err_code);
}
开发者ID:jarodz，项目名称:otolith，代码行数:55，代码来源:main.c
示例13: on_ble_evt
/**@brief Function for handling the Application's BLE stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
nrf_gpio_pin_clear(LED_CONNECTED_PIN);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
err_code = app_button_enable();
APP_ERROR_CHECK(err_code);
user_connected = true;
break;
case BLE_GAP_EVT_DISCONNECTED:
nrf_gpio_pin_set(LED_CONNECTED_PIN);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
err_code = app_button_disable();
APP_ERROR_CHECK(err_code);
user_connected = false;
advertising_start();
twi_clear_motorshield();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP,
NULL,
NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
// No system attributes have been stored.
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
开发者ID:jtguggedal，项目名称:Physical_Web_Toy_SDK_11，代码行数:53，代码来源:main.c
示例14: on_ble_evt
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt) {
uint32_t err_code;
switch (p_ble_evt->header.evt_id) {
case BLE_GAP_EVT_CONNECTED:
app.conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
//advertising_stop();
break;
case BLE_GAP_EVT_DISCONNECTED:
app.conn_handle = BLE_CONN_HANDLE_INVALID;
advertising_start();
break;
case BLE_GATTS_EVT_WRITE:
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(app.conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS, &m_sec_params, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(app.conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_AUTH_STATUS:
break;
case BLE_GAP_EVT_SEC_INFO_REQUEST:
// No keys found for this device.
err_code = sd_ble_gap_sec_info_reply(app.conn_handle, NULL, NULL, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING) {
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
default:
break;
}
}
开发者ID:quanghmfw，项目名称:blees，代码行数:52，代码来源:main.c
示例15: on_ble_evt
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
nrf_gpio_pin_set(CONNECTED_LED_PIN_NO);
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
nrf_gpio_pin_clear(CONNECTED_LED_PIN_NO);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
// Since we are not in a connection and have not started advertising, store bonds.
err_code = ble_bondmngr_bonded_centrals_store();
APP_ERROR_CHECK(err_code);
advertising_start();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
{
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
// Go to system-off mode (this function will not return; wakeup will cause a reset).
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
default:
// No implementation needed.
break;
}
}
开发者ID:huiyue000，项目名称:51822，代码行数:52，代码来源:main.c
示例16: on_ble_evt
/**@brief Application's Stack BLE event handler.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
led_on(CONNECTED_LED_PIN_NO);
led_off(ADVERTISING_LED_PIN_NO);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
led_off(CONNECTED_LED_PIN_NO);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP,
NULL,
NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
{
led_off(ADVERTISING_LED_PIN_NO);
}
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle,
NULL,
0,
(BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS | BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS));
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
开发者ID:kevin-ledinh，项目名称:banana-tree，代码行数:50，代码来源:ble_phone_connection.c
示例17: on_ble_evt
/**@brief Function for the Application's S110 SoftDevice event handler.
*
* @param[in] p_ble_evt S110 SoftDevice event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt) {
uint32_t err_code;
switch (p_ble_evt->header.evt_id) {
case BLE_GAP_EVT_TIMEOUT:
// the timeout for sd_ble_gap_adv_start expired - kick it off again
jswrap_nrf_bluetooth_startAdvertise();
break;
case BLE_GAP_EVT_CONNECTED:
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
ble_is_sending = false; // reset state - just in case
jsiSetConsoleDevice( EV_BLUETOOTH );
break;
case BLE_GAP_EVT_DISCONNECTED:
m_conn_handle = BLE_CONN_HANDLE_INVALID;
jsiSetConsoleDevice( DEFAULT_CONSOLE_DEVICE );
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
// Pairing not supported
err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP, NULL, NULL);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
// No system attributes have been stored.
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
break;
case BLE_EVT_TX_COMPLETE:
// UART Transmit finished - we can try and send more data
ble_is_sending = false;
jswrap_nrf_transmit_string();
break;
default:
// No implementation needed.
break;
}
}
开发者ID:zhaozhongchen，项目名称:Espruino，代码行数:47，代码来源:jswrap_bluetooth.c
示例18: ble_central_bondmngr_on_ble_evt
void ble_central_bondmngr_on_ble_evt(ble_central_bondmngr_t * p_bm, ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
switch(p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
printf("Starting authentication.\r\n");
printf("enc_info: %x\r\n", bond_info.enc_key.enc_info.ltk[0]);
print_address(&p_ble_evt->evt.gap_evt.params.connected.peer_addr);
if (memcmp((void *) &bond_info.addr, (void *) &p_ble_evt->evt.gap_evt.params.connected.peer_addr, sizeof(ble_gap_addr_t)) == 0)
{
printf("Is reconnecting.\r\n");
err_code = sd_ble_gap_encrypt(m_conn_handle, &bond_info.enc_key.master_id, &bond_info.enc_key.enc_info);
}
else
{
printf("New bond.\r\n");
bond_info.addr = p_ble_evt->evt.gap_evt.params.connected.peer_addr;
err_code = sd_ble_gap_authenticate(m_conn_handle, p_bm->p_sec_params);
}
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle, BLE_GAP_SEC_STATUS_SUCCESS, NULL, &bond_info.keyset);
printf("Security parameters requested.\r\n");
break;
case BLE_GAP_EVT_DISCONNECTED:
m_conn_handle = BLE_CONN_HANDLE_INVALID;
break;
default:
break;
}
APP_ERROR_CHECK(err_code);
}
开发者ID:huiyue000，项目名称:51822，代码行数:42，代码来源:ble_central_bondmngr.c
示例19: on_ble_evt
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
//APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_DISCONNECTED:
advertising_start();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
{
advertising_start();
}
break;
default:
// No implementation needed.
break;
}
}
开发者ID:Veerachart，项目名称:crazyflie2-nrf-firmware，代码行数:41，代码来源:ble.c
示例20: on_ble_evt
/**@brief Function for the Application's S110 SoftDevice event handler.
*
* @param[in] p_ble_evt S110 SoftDevice event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
static ble_gap_sec_keyset_t s_sec_keyset;
ble_gap_enc_info_t * p_enc_info;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
APP_ERROR_CHECK(err_code);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
advertising_start();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
s_sec_keyset.keys_periph.p_enc_key = NULL;
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params,
&s_sec_keyset);
APP_ERROR_CHECK(err_code);
break;
case BLE_GATTS_EVT_SYS_ATTR_MISSING:
err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0, 0);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_AUTH_STATUS:
// TODO: Adoptation to s110v8.0.0, is this needed anymore ?
break;
case BLE_GAP_EVT_SEC_INFO_REQUEST:
if (s_sec_keyset.keys_periph.p_enc_key != NULL)
{
p_enc_info = &s_sec_keyset.keys_periph.p_enc_key->enc_info;
err_code = sd_ble_gap_sec_info_reply(m_conn_handle, p_enc_info, NULL, NULL);
APP_ERROR_CHECK(err_code);
}
else
{
// No keys found for this device.
err_code = sd_ble_gap_sec_info_reply(m_conn_handle, NULL, NULL, NULL);
APP_ERROR_CHECK(err_code);
}
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
{
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
// Configure buttons with sense level low as wakeup source.
err_code = bsp_buttons_enable(1 << WAKEUP_BUTTON_ID);
APP_ERROR_CHECK(err_code);
// Go to system-off mode (this function will not return; wakeup will cause a reset).
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
default:
// No implementation needed.
break;
}
}
开发者ID:inamuj，项目名称:ble_app_uart，代码行数:77，代码来源:main.c
注：本文中的sd_ble_gap_sec_params_reply函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论