本文整理汇总了Python中pyNastran.bdf.bdf_interface.assign_type.integer函数的典型用法代码示例。如果您正苦于以下问题：Python integer函数的具体用法？Python integer怎么用？Python integer使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了integer函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: add_card
def add_card(cls, card, comment=''):
pid = integer(card, 1, 'pid')
mid = integer(card, 2, 'mid')
gamma = double_or_blank(card, 3, 'gamma', 0.5)
phi = double_or_blank(card, 4, 'gamma', 180.)
assert len(card) <= 5, 'len(PRAC3D card) = %i' % len(card)
return PRAC3D(pid, mid, gamma, phi, comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:7，代码来源:properties.py
示例2: add_card
def add_card(self, card, comment=''):
i = self.i
self.property_id[i] = integer(card, 1, 'pid')
self.material_id[i] = integer(card, 2, 'mid')
self.cordm[i] = integer_or_blank(card, 3, 'cordm', 0)
self.integ[i] = integer_string_or_blank(card, 4, 'integ', '')
#validIntegration = ['THREE', 'TWO', 'FULL', 'BUBBLE',
# 2, 3, None, 'REDUCED']
# ISOP
# ------
# 1. FULL
# 2.
# 3.
# REDUCED
# IN
# ------
# 1.
# 2. TWO
# 3. THREE
# BUBBLE - 2 for CTETRA, 3 for CHEXA/CPENTA
# STRESS
# ------
# 1. GAUSS (no midside nodes on CPENTA/CHEXA; ok on CTETRA)
# 2.
self.stress[i] = integer_string_or_blank(card, 5, 'stress', '')
self.isop[i] = integer_string_or_blank(card, 6, 'isop', '')
self.fctn[i] = string_or_blank(card, 7, 'fctn', 'SMECH')
assert len(card) <= 8, 'len(PSOLID card) = %i\ncard=%s' % (len(card), card)
self.i += 1
开发者ID:hurlei，项目名称:pyNastran，代码行数:31，代码来源:psolid.py
示例3: __init__
def __init__(self, card=None, data=None, comment=''):
ThermalElement.__init__(self, card)
if comment:
self._comment = comment
if card:
#: Surface element ID
self.eid = integer(card, 1, 'eid')
#: PHBDY property entry identification numbers. (Integer > 0)
self.pid = integer(card, 2, 'pid')
assert self.pid > 0
self.Type = string(card, 3, 'Type')
#print("self.Type = %s" % self.Type)
# msg = 'CHBDYP Type=%r' % self.Type
#assert self.Type in ['POINT','LINE','ELCYL','FTUBE','TUBE'], msg
#: A VIEW entry identification number for the front face.
self.iViewFront = integer_or_blank(card, 4, 'iViewFront', 0)
#: A VIEW entry identification number for the back face.
self.iViewBack = integer_or_blank(card, 5, 'iViewBack', 0)
#: Grid point identification numbers of grids bounding the surface.
#: (Integer > 0)
self.g1 = integer(card, 6, 'g1')
#: Grid point identification numbers of grids bounding the surface.
#: (Integer > 0)
if self.Type != 'POINT':
self.g2 = integer(card, 7, 'g2')
else:
self.g2 = blank(card, 7, 'g2')
#: Orientation grid point. (Integer > 0; Default = 0)
self.g0 = integer_or_blank(card, 8, 'g0', 0)
#: RADM identification number for front face of surface element.
#: (Integer > 0)
self.radMidFront = integer_or_blank(card, 9, 'radMidFront', 0)
#: RADM identification number for back face of surface element.
#: (Integer > 0)
self.radMidBack = integer_or_blank(card, 10, 'radMidBack', 0)
#: Grid point identification number of a midside node if it is used
#: with the line type surface element.
self.gmid = integer_or_blank(card, 11, 'gmid')
#: Coordinate system for defining orientation vector.
#: (Integer > 0; Default = 0
self.ce = integer_or_blank(card, 12, 'ce', 0)
#: Components of the orientation vector in coordinate system CE.
#: The origin of the orientation vector is grid point G1.
#: (Real or blank)
self.e1 = double_or_blank(card, 13, 'e3')
self.e2 = double_or_blank(card, 14, 'e3')
self.e3 = double_or_blank(card, 15, 'e3')
assert len(card) <= 16, 'len(CHBDYP card) = %i' % len(card)
else:
raise NotImplementedError(data)
开发者ID:watkinrt，项目名称:pyNastran，代码行数:60，代码来源:thermal.py
示例4: add_card
def add_card(cls, card, comment=''):
m = np.zeros((6, 6))
eid = integer(card, 1, 'eid')
nid = integer(card, 2, 'nid')
cid = integer_or_blank(card, 3, 'cid', 0)
m[0, 0] = double_or_blank(card, 4, 'M11', 0.)
m[1, 0] = double_or_blank(card, 5, 'M21', 0.)
m[1, 1] = double_or_blank(card, 6, 'M22', 0.)
m[2, 0] = double_or_blank(card, 7, 'M31', 0.)
m[2, 1] = double_or_blank(card, 8, 'M32', 0.)
m[2, 2] = double_or_blank(card, 9, 'M33', 0.)
m[3, 0] = double_or_blank(card, 10, 'M41', 0.)
m[3, 1] = double_or_blank(card, 11, 'M42', 0.)
m[3, 2] = double_or_blank(card, 12, 'M43', 0.)
m[3, 3] = double_or_blank(card, 13, 'M44', 0.)
m[4, 0] = double_or_blank(card, 14, 'M51', 0.)
m[4, 1] = double_or_blank(card, 15, 'M52', 0.)
m[4, 2] = double_or_blank(card, 16, 'M53', 0.)
m[4, 3] = double_or_blank(card, 17, 'M54', 0.)
m[4, 4] = double_or_blank(card, 18, 'M55', 0.)
m[5, 0] = double_or_blank(card, 19, 'M61', 0.)
m[5, 1] = double_or_blank(card, 20, 'M62', 0.)
m[5, 2] = double_or_blank(card, 21, 'M63', 0.)
m[5, 3] = double_or_blank(card, 22, 'M64', 0.)
m[5, 4] = double_or_blank(card, 23, 'M65', 0.)
m[5, 5] = double_or_blank(card, 24, 'M66', 0.)
assert len(card) <= 25, 'len(CONM1 card) = %i' % len(card)
return CONM1(eid, nid, cid, m, comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:29，代码来源:mass.py
示例5: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer(card, 2, 'pid')
nids = [integer_or_blank(card, 3, 'n1', 0),
integer_or_blank(card, 4, 'n2', 0)]
assert len(card) <= 5, 'len(CDAMP5 card) = %i\ncard=%s' % (len(card), card)
return CDAMP5(eid, pid, nids, comment=comment)
开发者ID:saullocastro，项目名称:pyNastran，代码行数:7，代码来源:damper.py
示例6: add_card
def add_card(self, card, comment=''):
assert self.n > 0, self.n
i = self.i
load_id = integer(card, 1, 'load_id')
tbar = double(card, 3, 'Tbar')
tprime = double(card, 4, 'Tprime')
t1 = double_or_blank(card, 5, 'T1')
t2 = double_or_blank(card, 6, 'T2')
self.load_id[i] = load_id
self.element_id[i] = integer(card, 2, 'element_id')
self.tbar[i] = tbar
self.tprime[i] = tprime
self.temp[i, 0] = t1
self.temp[i, 1] = t2
self.i += 1
if len(card) >= 7:
# i must be < self.n
eids = expand_thru(card[9:])
for eid in eids:
self.load_id[i] = load_id
assert isinstance(eid, int), eid
self.element_id[i] = eid
self.tbar[i] = tbar
self.tprime[i] = tprime
self.temp[i, 0] = t1
self.temp[i, 1] = t2
self.i += 1
assert self.i <= self.n
assert len(card) <= 7, '%s; n=%s' % (card, len(card))
#assert len(card) <= 7, len(card)
self.eids = None
开发者ID:hurlei，项目名称:pyNastran，代码行数:34，代码来源:temp.py
示例7: add_card
def add_card(cls, card, comment=''):
sid = integer(card, 1, 'sid')
method = string_or_blank(card, 2, 'method', 'LAN')
f1 = double_or_blank(card, 3, 'f1')
f2 = double_or_blank(card, 4, 'f2')
ne = integer_or_blank(card, 5, 'ne')
if method not in cls.allowed_methods:
msg = 'method=%s; allowed_methods=[%s]' % (
method, ', '.join(cls.allowed_methods))
raise ValueError(msg)
if method == 'SINV':
nd = integer_or_blank(card, 6, 'nd', 600)
if method == 'INV':
nd = integer_or_blank(card, 6, 'nd', 3 * ne)
elif method in ['GIV', 'MGIV', 'HOU', 'MHOU']:
nd = integer_or_blank(card, 6, 'nd', 0)
else:
nd = integer(card, 6, 'nd')
norm = string_or_blank(card, 9, 'norm', 'MASS')
if method == 'POINT':
G = integer(card, 10, 'G')
C = components(card, 11, 'C')
else:
G = blank(card, 10, 'G')
C = blank(card, 11, 'C')
assert len(card) <= 12, 'len(EIGR card) = %i\ncard=%s' % (len(card), card)
return EIGR(sid, method, f1, f2, ne, nd, norm, G, C, comment=comment)
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:31，代码来源:methods.py
示例8: add_card
def add_card(cls, card, icard=0, comment=''):
noffset = 2 * icard
sid = integer(card, 1, 'sid')
Type = string(card, 2, 'Type')
id = integer(card, 3 + noffset, 'id')
value = double(card, 4 + noffset, 'value')
return NSM(sid, Type, id, value, comment=comment)
开发者ID:saullocastro，项目名称:pyNastran，代码行数:7，代码来源:mass.py
示例9: add_card
def add_card(self, card, comment=''):
i = self.i
sid = integer(card, 1, 'sid')
excite_id = integer(card, 2, 'excite_id')
delay = integer_double_or_blank(card, 3, 'delay', 0.)
dphase = integer_double_or_blank(card, 4, 'dphase', 0.)
tc = integer_double_or_blank(card, 5, 'tc', 0)
td = integer_double_or_blank(card, 6, 'td', 0)
Type = integer_string_or_blank(card, 7, 'Type', 'LOAD')
if Type in [0, 'L', 'LO', 'LOA', 'LOAD']:
Type = 'LOAD'
elif Type in [1, 'D', 'DI', 'DIS', 'DISP']:
Type = 'DISP'
elif Type in [2, 'V', 'VE', 'VEL', 'VELO']:
Type = 'VELO'
elif Type in [3, 'A', 'AC', 'ACC', 'ACCE']:
Type = 'ACCE'
elif Type in [5, 6, 7, 12, 13]:
pass
else:
msg = 'invalid TLOAD2 type Type=%r' % Type
raise RuntimeError(msg)
assert len(card) <= 13, 'len(TLOAD2 card) = %i\ncard=%s' % (len(card), card)
self.sid[i] = sid
self.excite_id[i] = excite_id
if isinstance(delay, int):
self.delay_id[i] = delay
self.is_delay_table[i] = 1
elif isinstance(delay, float):
self.delay_tau[i] = delay
self.is_delay_table[i] = 0
else:
raise NotImplementedError(delay)
if isinstance(dphase, int):
self.dphase_id[i] = dphase
self.is_dphase_table[i] = 1
elif isinstance(dphase, float):
self.dphase_lead[i] = dphase
self.is_dphase_table[i] = 0
else:
raise NotImplementedError(dphase)
self.Type[i] = Type
if isinstance(tc, int):
self.table_c[i] = tc
elif isinstance(tc, float):
self.constant_c[i] = tc
else:
raise NotImplementedError('tc=%r' % tc)
if isinstance(td, int):
self.table_d[i] = td
elif isinstance(td, float):
self.constant_d[i] = td
else:
raise NotImplementedError('tc=%r' % tc)
self.i += 1
开发者ID:hurlei，项目名称:pyNastran，代码行数:60，代码来源:rload1.py
示例10: add_card
def add_card(cls, card, comment=''):
conid = integer(card, 1, 'conid')
rid = integer(card, 2, 'rid')
hid = integer(card, 3, 'hid')
c = components(card, 4, 'c')
d = double(card, 5, 'd')
return SPCAX(conid, rid, hid, c, d, comment=comment)
开发者ID:hurlei，项目名称:pyNastran，代码行数:7，代码来源:constraints.py
示例11: add_card
def add_card(self, card, comment=''):
#self.model.log.debug('chexa8-add')
i = self.i
#comment = self._comments[i]
eid = integer(card, 1, 'element_id')
if comment:
self.set_comment(eid, comment)
#: Element ID
self.element_id[i] = eid
#: Property ID
self.property_id[i] = integer(card, 2, 'property_id')
#: Node IDs
nids = array([
integer(card, 3, 'node_id_1'),
integer(card, 4, 'node_id_2'),
integer(card, 5, 'node_id_3'),
integer(card, 6, 'node_id_4'),
integer(card, 7, 'node_id_5'),
integer(card, 8, 'node_id_6'),
integer(card, 9, 'node_id_7'),
integer(card, 10, 'node_id_8')
], dtype='int32')
assert 0 not in nids, '%s\n%s' % (nids, card)
self.node_ids[i, :] = nids
assert len(card) == 11, 'len(CHEXA8 card) = %i\ncard=%s' % (len(card), card)
self.i += 1
开发者ID:saullocastro，项目名称:pyNastran，代码行数:28，代码来源:chexa8.py
示例12: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer_or_blank(card, 2, 'pid', eid)
ga = integer(card, 3, 'ga')
gb = integer(card, 4, 'gb')
x1_g0 = integer_double_or_blank(card, 5, 'x1_g0', 0.0)
if isinstance(x1_g0, integer_types):
g0 = x1_g0
x = None
elif isinstance(x1_g0, float):
g0 = None
x = np.array([double_or_blank(card, 5, 'x1', 0.0),
double_or_blank(card, 6, 'x2', 0.0),
double_or_blank(card, 7, 'x3', 0.0)], dtype='float64')
if norm(x) == 0.0:
msg = 'G0 vector defining plane 1 is not defined.\n'
msg += 'G0 = %s\n' % g0
msg += 'X = %s\n' % x
raise RuntimeError(msg)
else:
raise ValueError('invalid x1Go=%r on CBEND' % x1_g0)
geom = integer(card, 8, 'geom')
assert len(card) == 9, 'len(CBEND card) = %i\ncard=%s' % (len(card), card)
return CBEND(eid, pid, ga, gb, g0, x, geom, comment=comment)
开发者ID:hurlei，项目名称:pyNastran，代码行数:25，代码来源:bars.py
示例13: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer_or_blank(card, 2, 'pid', eid)
nids = [integer(card, 3, 'n1'),
integer(card, 4, 'n2')]
assert len(card) == 5, 'len(CTUBE card) = %i' % len(card)
return CTUBE(eid, pid, nids, comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:7，代码来源:rods.py
示例14: add
def add(self, card, comment=''):
i = self.i
self.property_id[i] = integer(card, 1, 'property_id')
self.material_id[i] = integer(card, 2, 'material_id')
self.area[i] = double_or_blank(card, 3, 'area', 0.0)
self.I1[i] = double_or_blank(card, 4, 'I1', 0.0)
self.I2[i] = double_or_blank(card, 5, 'I2', 0.0)
#: .. todo:: support SOL 600 default
Jdefault = 0.5 * (self.I1[i] + self.I2[i])
self.J[i] = double_or_blank(card, 6, 'J', Jdefault)
self.nsm[i] = double_or_blank(card, 7, 'non-structural_mass', 0.0)
if 0:
self.C1 = double_or_blank(card, 9, 'C1', 0.0)
self.C2 = double_or_blank(card, 10, 'C2', 0.0)
self.D1 = double_or_blank(card, 11, 'D1', 0.0)
self.D2 = double_or_blank(card, 12, 'D2', 0.0)
self.E1 = double_or_blank(card, 13, 'E1', 0.0)
self.E2 = double_or_blank(card, 14, 'E2', 0.0)
self.F1 = double_or_blank(card, 15, 'F1', 0.0)
self.F2 = double_or_blank(card, 16, 'F2', 0.0)
#: default=infinite; assume 1e8
self.K1 = double_or_blank(card, 17, 'K1', 1e8)
#: default=infinite; assume 1e8
self.K2 = double_or_blank(card, 18, 'K2', 1e8)
#: I12 -> use I12()
self.i12 = double_or_blank(card, 19, 'I12', 0.0)
if self.A == 0.0 and self.i12 == 0.0:
assert self.K1 is None, 'K1 must be blank if A=0.0 and I12=0.0; A=%r I12=%r K1=%r' % (self.A, self.i12, self.K1)
assert self.K2 is None, 'K2 must be blank if A=0.0 and I12=0.0; A=%r I12=%r K2=%r' % (self.A, self.i12, self.K2)
assert len(card) <= 20, 'len(PBAR card) = %i' % len(card)
self.i += 1
开发者ID:marcinch18，项目名称:pyNastran，代码行数:35，代码来源:pbar.py
示例15: __init__
def __init__(self, card, nCoord, data, comment):
Coord.__init__(self, card, data, comment)
self.is_resolved = False
if nCoord is not None:
assert nCoord in (0, 1), 'nCoord=%r' % (nCoord)
nCoord *= 4 # 0 if the 1st coord, 4 if the 2nd
#: the coordinate ID
self.cid = integer(card, 1 + nCoord, 'cid')
#: a Node at the origin
self.g1 = integer(card, 2 + nCoord, 'g1')
#: a Node on the z-axis
self.g2 = integer(card, 3 + nCoord, 'g2')
#: a Node on the xz-plane
self.g3 = integer(card, 4 + nCoord, 'g3')
else:
self.cid = data[0]
self.g1 = data[1]
self.g2 = data[2]
self.g3 = data[3]
assert len(data) == 4, 'data = %s' % (data)
assert self.g1 != self.g2
assert self.g1 != self.g3
assert self.g2 != self.g3
self.e1 = None
self.e2 = None
self.e3 = None
self.i = None
self.j = None
self.k = None
开发者ID:hurlei，项目名称:pyNastran，代码行数:32，代码来源:coordinate_systems.py
示例16: add_card
def add_card(cls, card, comment=''):
sid = integer(card, 1, 'sid')
nid0 = integer(card, 2, 'nid0')
# component 0 means an SPOINT/EPOINT
c = components_or_blank(card, 3, 'components_0', 0)
b0 = double_or_blank(card, 4, 'b0', 0.)
b1 = double_or_blank(card, 5, 'b1', 0.)
b2 = double_or_blank(card, 6, 'b2', 0.)
nfields = len(card) - 9
nrows = nfields // 8
if nfields % 8 > 0:
nrows += 1
nids = []
components = []
a = []
for irow in range(nrows):
j = irow * 8 + 9
#ifield = irow + 1
nid = integer(card, j, 'grid_%i' % (irow + 1))
component = components_or_blank(card, j + 1, 'components_%i' % (irow + 1), 0)
a0 = double_or_blank(card, j + 2, 'a0_%i' % (irow + 1), 0.)
a1 = double_or_blank(card, j + 3, 'a1_%i' % (irow + 1), 0.)
a2 = double_or_blank(card, j + 4, 'a2_%i' % (irow + 1), 0.)
nids.append(nid)
components.append(component)
a.append([a0, a1, a2])
return TF(sid, nid0, c, b0, b1, b2, nids, components, a,
comment=comment)
开发者ID:hurlei，项目名称:pyNastran，代码行数:30，代码来源:dynamic.py
示例17: add
def add(self, card, comment=''):
i = self.i
self.element_id[i] = integer(card, 1, 'element_id')
self.property_id[i] = integer(card, 2, 'property_id')
self.coord_id[i] = integer_or_blank(card, 3, 'cp', 0)
self.nspan[i] = integer_or_blank(card, 4, 'nspan', 0)
self.nchord[i] = integer_or_blank(card, 5, 'nchord', 0)
#if self.nspan==0:
self.lspan[i] = integer_or_blank(card, 6, 'lspan', 0)
#if self.nchord==0:
self.lchord[i] = integer_or_blank(card, 7, 'lchord', 0)
self.igid[i] = integer(card, 8, 'igid')
self.p1[i, :] = [double_or_blank(card, 9, 'x1', 0.0),
double_or_blank(card, 10, 'y1', 0.0),
double_or_blank(card, 11, 'z1', 0.0)]
self.x12[i] = double_or_blank(card, 12, 'x12', 0.)
self.p4[i, :] = [double_or_blank(card, 13, 'x4', 0.0),
double_or_blank(card, 14, 'y4', 0.0),
double_or_blank(card, 15, 'z4', 0.0)]
self.x43[i] = double_or_blank(card, 16, 'x43', 0.)
assert len(card) <= 17, 'len(CAERO1 card) = %i\ncard=%s' % (len(card), card)
self.i += 1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:28，代码来源:caero1.py
示例18: __init__
def __init__(self, card, comment=''):
self.pid = integer(card, 1, 'property_id')
self.sets = []
self.Types = []
self.gammas = []
self._cps = []
#self.set = integer(card, 2, 'set_id')
#self.Type = string(card, 3, 'Type')
#if self.Type not in ['NEWTON','PRANDTL-MEYER', 'CP']:
# raise RuntimeError('Type=%r' % Type)
#self.gamma = double_or_blank(card, 4, 'gamma', 1.4)
i = 2
while i < len(card):
self.sets.append(integer(card, i, 'set_id'))
Type = string(card, i+1, 'Type')
self.Types.append(Type)
#if self.Type not in ['NEWTON','PRANDTL-MEYER', 'CP']:
#raise RuntimeError('Type=%r' % Type)
self.gammas.append(double_or_blank(card, i+2, 'gamma', 1.4))
_cp = None
if Type == 'CP':
_cp = double(card, i+3, 'Cp')
elif Type == 'NEWTON':
_cp = double_or_blank(card, i+3, 'Cp_nominal', 2.0)
self._cps.append(_cp)
i += 7
开发者ID:FrankNaets，项目名称:pyNastran，代码行数:28，代码来源:cards.py
示例19: add_card
def add_card(cls, card, comment=''):
sid = integer(card, 1, 'sid')
excite_id = integer(card, 2, 'excite_id')
delay = integer_or_blank(card, 3, 'delay', 0)
Type = integer_string_or_blank(card, 4, 'Type', 'LOAD')
T1 = double_or_blank(card, 5, 'T1', 0.0)
T2 = double_or_blank(card, 6, 'T2', T1)
frequency = double_or_blank(card, 7, 'frequency', 0.)
phase = double_or_blank(card, 8, 'phase', 0.)
c = double_or_blank(card, 9, 'c', 0.)
b = double_or_blank(card, 10, 'b', 0.)
us0 = double_or_blank(card, 11, 'us0', 0.)
vs0 = double_or_blank(card, 12, 'vs0', 0.)
if Type in [0, 'L', 'LO', 'LOA', 'LOAD']:
Type = 'LOAD'
elif Type in [1, 'D', 'DI', 'DIS', 'DISP']:
Type = 'DISP'
elif Type in [2, 'V', 'VE', 'VEL', 'VELO']:
Type = 'VELO'
elif Type in [3, 'A', 'AC', 'ACC', 'ACCE']:
Type = 'ACCE'
elif Type in [5, 6, 7, 12, 13]:
pass
else:
msg = 'invalid TLOAD2 type Type=%r' % Type
raise RuntimeError(msg)
assert len(card) <= 13, 'len(TLOAD2 card) = %i\ncard=%s' % (len(card), card)
return TLOAD2(sid, excite_id, delay, Type, T1, T2, frequency, phase,
c, b, us0, vs0, comment=comment)
开发者ID:hurlei，项目名称:pyNastran，代码行数:31，代码来源:dloads.py
示例20: add_card
def add_card(cls, card, comment=''):
pid = integer(card, 1, 'pid')
mid = integer(card, 2, 'mid') # MATHE, MATHP
cid = integer_or_blank(card, 3, 'cid', 0)
stress_strain_output_location = string_or_blank(card, 4, 'str', 'GRID')
return PLPLANE(pid, mid, cid, stress_strain_output_location,
comment=comment)
开发者ID:watkinrt，项目名称:pyNastran，代码行数:7，代码来源:shell.py
注：本文中的pyNastran.bdf.bdf_interface.assign_type.integer函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论