本文整理汇总了Python中pyNastran.bdf.bdf_interface.assign_type.integer_or_blank函数的典型用法代码示例。如果您正苦于以下问题：Python integer_or_blank函数的具体用法？Python integer_or_blank怎么用？Python integer_or_blank使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了integer_or_blank函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: add_card
def add_card(cls, card, comment=''):
mid = integer(card, 1, 'mid')
tid = integer_or_blank(card, 2, 'tid')
Type = string(card, 3, 'Type')
if Type not in ['NLELAST', 'PLASTIC']:
raise ValueError('MATS1 Type must be [NLELAST, PLASTIC]; Type=%r' % Type)
if Type == 'NLELAST':
# should we even read these?
h = None
hr = None
yf = None
limit1 = None
limit2 = None
#h = blank(card, 4, 'h')
#hr = blank(card, 6, 'hr')
#yf = blank(card, 5, 'yf')
#limit1 = blank(card, 7, 'yf')
#limit2 = blank(card, 8, 'yf')
else:
h = double_or_blank(card, 4, 'H')
yf = integer_or_blank(card, 5, 'yf', 1)
hr = integer_or_blank(card, 6, 'hr', 1)
limit1 = double(card, 7, 'limit1')
if yf in [3, 4]:
limit2 = double(card, 8, 'limit2')
else:
#limit2 = blank(card, 8, 'limit2')
limit2 = None
assert len(card) <= 9, 'len(MATS1 card) = %i\ncard=%s' % (len(card), card)
return MATS1(mid, tid, Type, h, hr, yf, limit1, limit2, comment=comment)
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:32，代码来源:material_deps.py
示例2: add_card
def add_card(cls, card, comment=''):
pid = integer(card, 1, 'pid')
tkid = integer_or_blank(card, 2, 'tkid', 0)
tgeid = integer_or_blank(card, 3, 'tgeid', 0)
tknid = integer_or_blank(card, 4, 'tknid', 0)
assert len(card) <= 5, 'len(PELAST card) = %i' % len(card)
return PELAST(pid, tkid, tgeid, tknid, comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:7，代码来源:springs.py
示例3: add_card
def add_card(self, card, comment=''):
pid = integer(card, 1, 'property_id')
if comment:
self.set_comment(pid, comment)
i = self.i
self.property_id[i] = pid
self.thickness[i] = double(card, 3, 'thickness')
self.twelveIt3[i] = double_or_blank(card, 5, '12*I/t^3', 1.0)
self.tst[i] = double_or_blank(card, 7, 'ts/t', 0.833333)
self.nsm[i] = double_or_blank(card, 8, 'nsm', 0.0)
t_over_2 = self.thickness[i] / 2.
self.z1[i] = double_or_blank(card, 9, 'z1', -t_over_2)
self.z2[i] = double_or_blank(card, 10, 'z2', t_over_2)
self.material_ids[i, :] = [
integer(card, 2, 'material_id'),
integer_or_blank(card, 4, 'material_id2', -1),
integer_or_blank(card, 6, 'material_id3', -1),
integer_or_blank(card, 11, 'material_id4', -1)
]
#self.model.log.debug(self.material_ids[i, :])
#ii = np.array([i])
#file_obj = StringIO()
#file_obj.write('<PSHELL object> n=%s\n' % self.n)
#self.write_card_by_index(file_obj, i=ii)
#print(file_obj.getvalue())
assert len(card) <= 12, 'len(PSHELL card) = %i\ncard=%s' % (len(card), card)
self.i += 1
开发者ID:hurlei，项目名称:pyNastran，代码行数:32，代码来源:pshell.py
示例4: add
def add(self, card, comment=''):
self._comment = comment
self.n = 1
self.cp = integer_or_blank(card, 2, 'cp', 0)
self.cd = integer_or_blank(card, 6, 'cd', 0)
self.ps = integer_or_blank(card, 7, 'ps', -1)
self.seid = integer_or_blank(card, 8, 'seid', 0)
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:7，代码来源:grid.py
示例5: __init__
def __init__(self, card, comment=''):
ThermalElement.__init__(self, card)
if comment:
self._comment = comment
#: Surface element ID
self.eid = integer(card, 1, 'eid')
# no field 2
#: Surface type
self.Type = string(card, 3, 'Type')
assert self.Type in ['REV', 'AREA3', 'AREA4', 'AREA6', 'AREA8']
#: A VIEW entry identification number for the front face
self.iViewFront = integer_or_blank(card, 4, 'iViewFront', 0)
#: A VIEW entry identification number for the back face
self.iViewBack = integer_or_blank(card, 8, 'iViewBack', 0)
#: RADM identification number for front face of surface element
#: (Integer > 0)
self.radMidFront = integer_or_blank(card, 6, 'radMidFront', 0)
#: RADM identification number for back face of surface element
#: (Integer > 0)
self.radMidBack = integer_or_blank(card, 7, 'radMidBack', 0)
# no field 8
#: Grid point IDs of grids bounding the surface (Integer > 0)
self.nodes = []
n = 1
for i in range(9, len(card)):
grid = integer_or_blank(card, i, 'grid%i' % n)
if grid is not None:
self.nodes.append(grid)
assert len(self.nodes) > 0, 'card=%s' % card
开发者ID:watkinrt，项目名称:pyNastran，代码行数:35，代码来源:thermal.py
示例6: test_integer_or_blank
def test_integer_or_blank(self):
"""
value = integer_or_blank(card, n, fieldname)
"""
# integer
self.check_integer(integer_or_blank)
# float
with self.assertRaises(SyntaxError):
integer_or_blank(BDFCard([1.]), 0, 'field')
with self.assertRaises(SyntaxError):
integer_or_blank(BDFCard(['1.']), 0, 'field')
# string
with self.assertRaises(SyntaxError):
integer_or_blank(BDFCard(['a']), 0, 'field')
with self.assertRaises(SyntaxError):
integer_or_blank(BDFCard(['1b']), 0, 'field')
# blank
self.assertEqual('a', integer_or_blank(BDFCard(['']), 0, 'field', 'a'))
self.assertEqual('b', integer_or_blank(BDFCard([None]), 0, 'field', 'b'))
card = [1, '2', '3.', 'C', None, '']
exact = [1, 2, SyntaxError, SyntaxError, None, None]
default = [None, None, None, None, None, None]
self.run_function_default(integer_or_blank, card, exact, default)
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:28，代码来源:test_assign_type.py
示例7: add_card
def add_card(cls, card, comment=''):
name = string(card, 1, 'name')
#zero
#: 4-Lower Triangular; 5=Upper Triangular; 6=Symmetric; 8=Identity (m=nRows, n=m)
ifo = integer(card, 3, 'ifo')
#: 1-Real, Single Precision; 2=Real,Double Precision;
# 3=Complex, Single; 4=Complex, Double
tin = integer(card, 4, 'tin')
#: 0-Set by cell precision
tout = integer_or_blank(card, 5, 'tout', 0)
#: Input format of Ai, Bi. (Integer=blank or 0 indicates real, imaginary format;
#: Integer > 0 indicates amplitude, phase format.)
polar = integer_or_blank(card, 6, 'polar', 0)
if ifo == 1: # square
ncols = integer_or_blank(card, 8, 'ifo=%s; ncol' % (ifo))
elif ifo == 6: # symmetric
ncols = integer_or_blank(card, 8, 'ifo=%s; ncol' % (ifo))
elif ifo in [2, 9]: # rectangular
ncols = integer(card, 8, 'ifo=%s; ncol' % (ifo))
else:
# technically right, but nulling this will fix bad decks
#self.ncols = blank(card, 8, 'ifo=%s; ncol' % self.ifo)
raise NotImplementedError('ifo=%s is not supported' % ifo)
GCj = []
GCi = []
Real = []
Complex = []
return cls(name, ifo, tin, tout, polar, ncols,
GCj, GCi, Real, Complex, comment=comment)
开发者ID:saullocastro，项目名称:pyNastran，代码行数:32，代码来源:dmig.py
示例8: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer_or_blank(card, 2, 'pid', eid)
nids = [integer_or_blank(card, 3, 'n1', 0),
integer_or_blank(card, 4, 'n2', 0)]
assert len(card) <= 5, 'len(CVISC card) = %i\ncard=%s' % (len(card), card)
return CVISC(eid, pid, nids, comment=comment)
开发者ID:saullocastro，项目名称:pyNastran，代码行数:7，代码来源:damper.py
示例9: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer_or_blank(card, 2, 'pid', eid)
s1 = integer_or_blank(card, 3, 's1')
s2 = integer_or_blank(card, 4, 's2')
assert len(card) <= 5, 'len(CMASS3 card) = %i' % len(card)
return CMASS3(eid, pid, s1, s2, comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:7，代码来源:mass.py
示例10: add_card
def add_card(cls, card, comment=''):
sid = integer(card, 1, 'sid')
method = string_or_blank(card, 2, 'method', 'LAN')
f1 = double_or_blank(card, 3, 'f1')
f2 = double_or_blank(card, 4, 'f2')
ne = integer_or_blank(card, 5, 'ne')
if method not in cls.allowed_methods:
msg = 'method=%s; allowed_methods=[%s]' % (
method, ', '.join(cls.allowed_methods))
raise ValueError(msg)
if method == 'SINV':
nd = integer_or_blank(card, 6, 'nd', 600)
if method == 'INV':
nd = integer_or_blank(card, 6, 'nd', 3 * ne)
elif method in ['GIV', 'MGIV', 'HOU', 'MHOU']:
nd = integer_or_blank(card, 6, 'nd', 0)
else:
nd = integer(card, 6, 'nd')
norm = string_or_blank(card, 9, 'norm', 'MASS')
if method == 'POINT':
G = integer(card, 10, 'G')
C = components(card, 11, 'C')
else:
G = blank(card, 10, 'G')
C = blank(card, 11, 'C')
assert len(card) <= 12, 'len(EIGR card) = %i\ncard=%s' % (len(card), card)
return EIGR(sid, method, f1, f2, ne, nd, norm, G, C, comment=comment)
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:31，代码来源:methods.py
示例11: add
def add(self, card, comment=''):
i = self.i
self.element_id[i] = integer(card, 1, 'element_id')
self.property_id[i] = integer(card, 2, 'property_id')
self.coord_id[i] = integer_or_blank(card, 3, 'cp', 0)
self.nspan[i] = integer_or_blank(card, 4, 'nspan', 0)
self.nchord[i] = integer_or_blank(card, 5, 'nchord', 0)
#if self.nspan==0:
self.lspan[i] = integer_or_blank(card, 6, 'lspan', 0)
#if self.nchord==0:
self.lchord[i] = integer_or_blank(card, 7, 'lchord', 0)
self.igid[i] = integer(card, 8, 'igid')
self.p1[i, :] = [double_or_blank(card, 9, 'x1', 0.0),
double_or_blank(card, 10, 'y1', 0.0),
double_or_blank(card, 11, 'z1', 0.0)]
self.x12[i] = double_or_blank(card, 12, 'x12', 0.)
self.p4[i, :] = [double_or_blank(card, 13, 'x4', 0.0),
double_or_blank(card, 14, 'y4', 0.0),
double_or_blank(card, 15, 'z4', 0.0)]
self.x43[i] = double_or_blank(card, 16, 'x43', 0.)
assert len(card) <= 17, 'len(CAERO1 card) = %i\ncard=%s' % (len(card), card)
self.i += 1
开发者ID:EmanueleCannizzaro，项目名称:pyNastran，代码行数:28，代码来源:caero1.py
示例12: add_card
def add_card(cls, card, comment=''):
pid = integer(card, 1, 'pid')
mid1 = integer_or_blank(card, 2, 'mid1')
t = double_or_blank(card, 3, 't')
mid2 = integer_or_blank(card, 4, 'mid2')
twelveIt3 = double_or_blank(card, 5, '12*I/t^3', 1.0) # poor name
mid3 = integer_or_blank(card, 6, 'mid3')
tst = double_or_blank(card, 7, 'ts/t', 0.833333)
nsm = double_or_blank(card, 8, 'nsm', 0.0)
if t is not None:
t_over_2 = t / 2.
z1 = double_or_blank(card, 9, 'z1', -t_over_2)
z2 = double_or_blank(card, 10, 'z2', t_over_2)
else:
z1 = double_or_blank(card, 9, 'z1')
z2 = double_or_blank(card, 10, 'z2')
mid4 = integer_or_blank(card, 11, 'mid4')
#if self.mid2 is None:
# assert self.mid3 is None
#else: # mid2 is defined
# #print (self.mid2 = ", self.mid2)
# assert self.mid2 >= -1
# #assert self.mid3 > 0
#if self.mid1 is not None and self.mid2 is not None:
# assert self.mid4 == None
assert len(card) <= 12, 'len(PSHELL card) = %i' % len(card)
return PSHELL(pid, mid1, t, mid2, twelveIt3,
mid3, tst, nsm,
z1, z2, mid4, comment=comment)
开发者ID:watkinrt，项目名称:pyNastran，代码行数:33，代码来源:shell.py
示例13: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
k = double(card, 2, 'k')
s1 = integer_or_blank(card, 3, 's1', 0)
s2 = integer_or_blank(card, 4, 's2', 0)
assert len(card) <= 5, 'len(CELAS4 card) = %i\ncard=%s' % (len(card), card)
return CELAS4(eid, k, s1, s2, comment=comment)
开发者ID:hurlei，项目名称:pyNastran，代码行数:7，代码来源:springs.py
示例14: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer_or_blank(card, 2, 'pid', eid)
ga = integer(card, 3, 'ga')
gb = integer(card, 4, 'gb')
gc = integer(card, 5, 'gc')
x, g0 = cls._init_x_g0(card, eid)
wa = np.array([double_or_blank(card, 9, 'w1a', 0.0),
double_or_blank(card, 10, 'w2a', 0.0),
double_or_blank(card, 11, 'w3a', 0.0)], dtype='float64')
wb = np.array([double_or_blank(card, 12, 'w1b', 0.0),
double_or_blank(card, 13, 'w2b', 0.0),
double_or_blank(card, 14, 'w3b', 0.0)], dtype='float64')
wc = np.array([double_or_blank(card, 15, 'w1c', 0.0),
double_or_blank(card, 16, 'w2c', 0.0),
double_or_blank(card, 17, 'w3c', 0.0)], dtype='float64')
tw = np.array([double_or_blank(card, 18, 0., 'twa'),
double_or_blank(card, 19, 0., 'twb'),
double_or_blank(card, 20, 0., 'twc')], dtype='float64')
s = np.array([integer_or_blank(card, 21, 'sa'),
integer_or_blank(card, 22, 'sb'),
integer_or_blank(card, 23, 'sc')], dtype='float64')
assert len(card) <= 24, 'len(CBEAM3 card) = %i\ncard=%s' % (len(card), card)
return CBEAM3(eid, pid, ga, gb, gc, x, g0,
wa, wb, wc, tw, s, comment='')
开发者ID:hurlei，项目名称:pyNastran，代码行数:31，代码来源:bars.py
示例15: add_card
def add_card(cls, card, comment=''):
eid = integer(card, 1, 'eid')
pid = integer(card, 2, 'pid')
nids = [integer_or_blank(card, 3, 'n1', 0),
integer_or_blank(card, 4, 'n2', 0)]
assert len(card) <= 5, 'len(CDAMP5 card) = %i' % len(card)
return CDAMP5(eid, pid, nids, comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:7，代码来源:damper.py
示例16: build
def build(self):
cards = self._cards
ncards = len(cards)
self.n = ncards
if ncards:
float_fmt = self.model.float_fmt
self.nid = zeros(ncards, 'int32')
self.temp = zeros(ncards, float_fmt)
for i, card in enumerate(cards):
#: Node ID
self.nid[i] = integer(card, 1, 'nid')
#: Grid point coordinate system
self.cp[i] = integer_or_blank(card, 2, 'cp', cp0)
x = double_or_blank(card, 3, 'x1', 0.)
y = double_or_blank(card, 4, 'x2', 0.)
z = double_or_blank(card, 5, 'x3', 0.)
#: node location in local frame
self.xyz[i] = [x, y, z]
#: Analysis coordinate system
self.cd[i] = integer_or_blank(card, 6, 'cd', cd0)
#: SPC constraint
self.ps[i] = integer_or_blank(card, 7, 'ps', ps0)
#: Superelement ID
self.seid[i] = integer_or_blank(card, 8, 'seid', seid0)
开发者ID:saullocastro，项目名称:pyNastran，代码行数:31，代码来源:temp.py
示例17: add_card
def add_card(cls, card, comment=''):
#: Property ID
pid = integer(card, 1, 'pid')
#: Material ID
mid1 = integer_or_blank(card, 2, 'mid1', 0)
t1 = double_or_blank(card, 3, 't1')
mid2 = integer_or_blank(card, 4, 'mid2', 0)
if mid2 > 0:
i = double(card, 5, 'i')
assert i > 0.0
else:
i = blank(card, 5, 'i')
mid3 = integer(card, 6, 0)
if mid3 > 0:
t2 = double(card, 7, 't3')
assert t2 > 0.0
else:
t2 = blank(card, 7, 't3')
nsm = double(card, 8, 'nsm')
z1 = double(card, 9, 'z1')
z2 = double(card, 10, 'z2')
j = 1
phi = []
for i in range(11, len(card)):
phii = double(card, i, 'phi' % j)
phi.append(phii)
j += 1
return PCONEAX(pid, mid1, t1, mid2, i, mid3, t2, nsm, z1, z2, phi,
comment=comment)
开发者ID:marcinch18，项目名称:pyNastran，代码行数:33，代码来源:properties.py
示例18: _read_shock
def _read_shock(self, card, istart):
"""
F(u, v) = Cv * S(u) * sign(v) * |v|^ev
"""
self.shockType = string_or_blank(card, istart + 1, 'shockType')
self.shockCVT = double(card, istart + 2, 'shockCVT')
self.shockCVC = double_or_blank(card, istart + 3, 'shockCVC')
self.shockExpVT = double_or_blank(card, istart + 4, 'shockExpVT', 1.0)
self.shockExpVC = double_or_blank(card, istart + 5,
'shockExpVC', self.shockExpVT)
if self.shockType == 'TABLE':
pass
# self.shockIDTS = integer(card, istart + 6, 'shockIDTS')
# self.shockIDETS = blank(card, istart + 9, 'shockIDETS')
# self.shockIDECS = blank(card, istart + 10, 'shockIDECS')
# self.shockIDETSD = blank(card, istart + 11, 'shockIDETSD')
# self.shockIDECSD = blank(card, istart + 12, 'shockIDECSD')
elif self.shockType == 'EQUAT':
self.shockIDTS = blank(card, istart + 6, 'shockIDTS')
self.shockIDETS = integer(card, istart + 9, 'shockIDETS')
self.shockIDECS = integer_or_blank(card, istart + 10,
'shockIDECS', self.shockIDETS)
self.shockIDETSD = integer(card, istart + 11, 'shockIDETSD')
self.shockIDECSD = integer_or_blank(card, istart + 11,
'shockIDECSD', self.shockIDETSD)
#def DEquation(self):
#if isinstance(self.dequation, int):
#return self.dequation
#return self.dequation.equation_id
else:
raise RuntimeError('Invalid shockType=%r on card\n%s' %(self.shockType, card))
istart += 8
return istart
开发者ID:marcinch18，项目名称:pyNastran，代码行数:35，代码来源:bush.py
示例19: add_card
def add_card(self, card, comment=''):
i = self.i
self.element_id[i] = integer(card, 1, 'element_id')
self.property_id[i] = integer(card, 2, 'property_id')
print(card)
self.node_ids[i, :] = [
integer(card, 3, 'n1'),
integer(card, 4, 'n2'),
integer(card, 5, 'n3'),
integer(card, 6, 'n4'),
integer_or_blank(card, 7, 'n5', 0),
integer_or_blank(card, 8, 'n6', 0),
integer_or_blank(card, 9, 'n7', 0),
integer_or_blank(card, 10, 'n8', 0)]
self.thickness[i, :] = [
double_or_blank(card, 11, 'T1', 1.0),
double_or_blank(card, 12, 'T2', 1.0),
double_or_blank(card, 13, 'T3', 1.0),
double_or_blank(card, 14, 'T4', 1.0), ]
#self.theta_mcid[i] = integer_double_or_blank(card, 15, 'theta_mcid', 0.0)
self.zoffset[i] = double_or_blank(card, 16, 'zoffset', 0.0)
self.t_flag[i] = integer_or_blank(card, 17, 'TFlag', 0)
self.i += 1
开发者ID:saullocastro，项目名称:pyNastran，代码行数:26，代码来源:cquad8.py
示例20: add_card
def add_card(self, card, comment=""):
i = self.i
self.element_id[i] = integer(card, 1, "eid")
self.property_id[i] = integer_or_blank(card, 2, "pid", self.element_id[i])
self.node_ids[i, :] = [integer(card, 3, "n1"), integer(card, 5, "n2")]
self.components[i, :] = [integer_or_blank(card, 4, "c1", 0), integer_or_blank(card, 6, "c2", 0)]
assert len(card) <= 7, "len(CELAS1 card) = %i\ncard=%s" % (len(card), card)
self.i += 1
开发者ID:hurlei，项目名称:pyNastran，代码行数:8，代码来源:celas1.py
注：本文中的pyNastran.bdf.bdf_interface.assign_type.integer_or_blank函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论