本文整理汇总了Python中pybvc.openflowdev.ofswitch.FlowEntry类的典型用法代码示例。如果您正苦于以下问题：Python FlowEntry类的具体用法？Python FlowEntry怎么用？Python FlowEntry使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了FlowEntry类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: Address
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" Input Port (%s)" % (hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp, ip_ecn,
input_port))
print (" Action: Output (CONTROLLER)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 15
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1006)
flow_entry.set_flow_cookie(cookie=100)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
# --- Instruction: 'Apply-action'
# Action: 'Output' to CONTROLLER
instruction = Instruction(instruction_order = 0)
action = OutputAction(action_order = 0, port = "CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
开发者ID:jebpublic，项目名称:pybvcsamples，代码行数:30，代码来源:of_flowMatchPhysPort-EthSrcDest-IpSrcDestDscpEcn_ActCtrl.py
示例2: print
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" Input Port (%s)\n" % (hex(eth_type), eth_src,
eth_dst, input_port))
print (" Actions: 'Push VLAN' (Ethernet Type=%s)"
% hex(push_eth_type))
print (" 'Set Field' (VLAN ID=%s)" % push_vlan_id)
print (" 'Output' (to Physical Port Number %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
flow_entry.set_flow_name(flow_name = "push_vlan_flow")
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 21
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1012)
flow_entry.set_flow_cookie(cookie = 401)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
flow_entry.set_flow_hard_timeout(hard_timeout = 1200)
flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
# --- Instruction: 'Apply-action'
# Actions: 'PushVlan'
# 'SetField'
# 'Output'
开发者ID:jebpublic，项目名称:pybvcsamples，代码行数:31，代码来源:of_flowMatchPhysPort-EthSrcDest_ActVlanPushSetPhysPort.py
示例3: ECN
" IP ECN (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IPv6 Flow Label (%s)\n"
" ICMPv6 Type (%s)\n"
" ICMPv6 Code (%s)\n"
" Metadata (%s)" % (hex(eth_type), ip_dscp, ip_ecn,
ipv6_src, ipv6_dst, ipv6_flabel,
icmpv6_type, icmpv6_code, metadata))
print (" Action: Output (to %s)" % output_port)
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 26
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name = "demo20.py")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority = 1019)
flow_entry.set_flow_cookie(cookie = 250)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
flow_entry.set_flow_hard_timeout(hard_timeout = 1200)
flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order = 0)
action = OutputAction(order = 0, port = output_port)
开发者ID:jebpublic，项目名称:pybvcsamples，代码行数:31，代码来源:demo20.py
示例4: of_demo_25
def of_demo_25():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 25 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
table_id = 0
priority = 500
cookie = 1000
cookie_mask = 255
customer_port = 110
provider_port = 111
qinq_eth_type = ETH_TYPE_STAG # 802.1ad (QinQ) VLAN tagged frame
dot1q_eth_type = ETH_TYPE_CTAG # 802.1q VLAN tagged frame
arp_eth_type = ETH_TYPE_ARP
ip_eth_type = ETH_TYPE_IPv4
provider_vlan_id = 100 # Provider VLAN
customer_vlan_id = 998 # Customer VLAN
first_flow_id = 31
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)"
% (hex(arp_eth_type), customer_vlan_id, customer_port))
print (" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)"
% (hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
fname = "[MLX1-A] Test flow (match:inport=110,arp;" + \
"actions:push-QINQ-tag,mod_vlan=100," + \
"push-DOT1Q-tag,mod_vlan=998,output:111)"
flow_entry1.set_flow_name(flow_name=fname)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout=600)
flow_entry1.set_flow_idle_timeout(idle_timeout=300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order=0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(provider_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = PushVlanHeaderAction(action_order)
action.set_eth_type(dot1q_eth_type)
instruction.add_apply_action(action)
action_order += 1
action = SetFieldAction(action_order)
action.set_vlan_id(customer_vlan_id)
instruction.add_apply_action(action)
#.........这里部分代码省略.........
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo25.py
示例5: of_demo_12
def of_demo_12():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 12 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# ARP Operation
# ARP Source IPv4 Address
# ARP Target IPv4 Address
# ARP source hardware address
# ARP target hardware address
# NOTE: Ethernet type MUST be 2054 (0x0806) -> ARP protocol
eth_type = ETH_TYPE_ARP
eth_src = "00:ab:fe:01:03:31"
eth_dst = "ff:ff:ff:ff:ff:ff"
arp_opcode = ARP_REQUEST
arp_src_ipv4_addr = "192.168.4.1/32"
arp_tgt_ipv4_addr = "10.21.22.23/32"
arp_src_hw_addr = "12:34:56:78:98:ab"
arp_tgt_hw_addr = "fe:dc:ba:98:76:54"
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" ARP Operation (%s)\n"
" ARP Source IPv4 Address (%s)\n"
" ARP Target IPv4 Address (%s)\n"
" ARP Source Hardware Address (%s)\n"
" ARP Target Hardware Address (%s)" %
(hex(eth_type), eth_src,
eth_dst, arp_opcode,
arp_src_ipv4_addr,
arp_tgt_ipv4_addr,
arp_src_hw_addr,
arp_tgt_hw_addr))
print (" Action: Output (CONTROLLER)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 19
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1010)
# --- Instruction: 'Apply-actions'
# Action: 'Output' CONTROLLER
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# ARP Operation
# ARP Source IPv4 Address
# ARP Target IPv4 Address
# ARP Source Hardware Address
# ARP Target Hardware Address
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_arp_opcode(arp_opcode)
match.set_arp_src_transport_address(arp_src_ipv4_addr)
match.set_arp_tgt_transport_address(arp_tgt_ipv4_addr)
match.set_arp_src_hw_address(arp_src_hw_addr)
match.set_arp_tgt_hw_address(arp_tgt_hw_addr)
flow_entry.add_match(match)
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo12.py
示例6: of_demo_26
def of_demo_26():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 26 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
flow_table_id = 0
flow_id_base = 12
flow_id = flow_id_base
flowEntries = []
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(6001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(12000)
flow_entry.set_flow_hard_timeout(12000)
flow_entry.set_flow_priority(1000)
instruction = Instruction(instruction_order=0)
action = DropAction(order=0)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_ARP)
match.set_eth_src("00:11:22:33:44:55")
match.set_eth_dst("aa:bb:cc:dd:ee:ff")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(7001)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_idle_timeout(2400)
flow_entry.set_flow_hard_timeout(2400)
flow_entry.set_flow_priority(2000)
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="CONTROLLER", max_len=60)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
match.set_eth_type(ETH_TYPE_IPv4)
match.set_ipv4_src("1.2.3.4/32")
match.set_ipv4_dst("192.168.1.11/32")
flow_entry.add_match(match)
flowEntries.append(flow_entry)
# Sample flow entry
flow_entry = FlowEntry()
flow_entry.set_flow_cookie(800)
flow_entry.set_flow_table_id(flow_table_id)
flow_entry.set_flow_id(flow_id)
flow_id += 1
flow_entry.set_flow_hard_timeout(1800)
flow_entry.set_flow_idle_timeout(1800)
flow_entry.set_flow_priority(3000)
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=5)
instruction.add_apply_action(action)
action = OutputAction(order=1, port=6)
instruction.add_apply_action(action)
action = OutputAction(order=2, port=7)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
match = Match()
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo26.py
示例7: of_demo_11
def of_demo_11():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 11 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# ICMPv4 Type
# ICMPv4 Code
# IP DSCP
# IP ECN
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
# IP Protocol Type MUST be 1 -> ICMP
eth_type = ETH_TYPE_IPv4
eth_src = "00:00:00:11:23:ae"
eth_dst = "00:ff:20:01:1a:3d"
ipv4_src = "17.1.2.3/8"
ipv4_dst = "172.168.5.6/18"
ip_proto = IP_PROTO_ICMP
ip_dscp = IP_DSCP_CS2 # 'Class Selector' = 'Immediate'
ip_ecn = IP_ECN_CE # Congestion Encountered
icmpv4_type = 6 # Alternate Host Address
icmpv4_code = 3 # Alternate Address for Host
input_port = 10
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" ICMPv4 Type (%s)\n"
" ICMPv4 Code (%s)\n"
" Input Port (%s)"
% (hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp, ip_ecn,
icmpv4_type, icmpv4_code,
input_port))
print (" Action: Output (NORMAL)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 18
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1009)
# --- Instruction: 'Apply-actions'
# Action: 'Output' NORMAL
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port="NORMAL")
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# IP ECN
# ICMPv4 Type
#.........这里部分代码省略.........
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo11.py
示例8: of_demo_36
#.........这里部分代码省略.........
elif(status.eq(STATUS.DATA_NOT_FOUND)):
grp_ids_oper = []
else:
print ("\n").strip()
print ("!!!Error, reason: %s" % status.detailed())
# Show current state of the Group Table in the Controller's
# configuration and operational data stores
print_groups(grp_ids_cfg, grp_ids_oper)
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Group action example"
priority = 1000
cookie = 1400
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
print "\n".strip()
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)" %
(match_in_port, hex(match_eth_type)))
print (" Actions: Apply Group (%s)\n" % group_id)
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = GroupAction(action_order)
action.set_group_id(group_id)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
flow_entry1.add_match(match)
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
开发者ID:BillTheBest，项目名称:pybvc，代码行数:67，代码来源:demo36.py
示例9: of_demo_37
def of_demo_37():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 37 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Modify VLAN ID and VLAN priority example1"
priority = 600
cookie = 1000
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_vlan_id = 100
act_mod_vlan_id = 172
act_mod_vlan_pcp = 2
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" VLAN ID (%s)" %
(match_in_port,
hex(match_eth_type),
match_vlan_id))
print (" Actions: Set VLAN ID (%s)\n"
" Set VLAN priority (%s)\n"
" Output (%s)" %
(act_mod_vlan_id, act_mod_vlan_pcp, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetVlanIdAction(action_order)
action.set_vid(act_mod_vlan_id)
instruction.add_apply_action(action)
action_order += 1
action = SetVlanPCPAction(action_order)
action.set_vlan_pcp(act_mod_vlan_pcp)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_vlan_id(match_vlan_id)
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo37.py
示例10: of_demo_20
def of_demo_20():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 20 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# ICMPv6 type
# ICMPv6 Code
# Metadata
eth_type = ETH_TYPE_IPv6
ip_dscp = IP_DSCP_CS7 # 'Class Selector' = 'Network'
ip_ecn = IP_ECN_CE # 'Congestion Encountered'
ipv6_src = "1234:5678:9ABC:DEF0:FDCD:A987:6543:210F/76"
ipv6_dst = "2000:2abc:edff:fe00::3456/94"
ipv6_flabel = 15
ip_proto = IP_PROTO_ICMPv6
icmpv6_type = 1 # 'Destination Unreachable'
icmpv6_code = 3 # 'Address Unreachable'
metadata = "0x0123456789ABCDEF"
# --- Flow Actions: Output (CONTROLLER)
output_port = "CONTROLLER"
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" IP DSCP (%s)\n"
" IP ECN (%s)\n"
" IPv6 Source Address (%s)\n"
" IPv6 Destination Address (%s)\n"
" IPv6 Flow Label (%s)\n"
" ICMPv6 Type (%s)\n"
" ICMPv6 Code (%s)\n"
" Metadata (%s)" %
(hex(eth_type), ip_dscp, ip_ecn,
ipv6_src, ipv6_dst, ipv6_flabel,
icmpv6_type, icmpv6_code, metadata))
print (" Action: Output (to %s)" % (output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 26
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_name(flow_name="demo20.py")
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_priority(flow_priority=1019)
flow_entry.set_flow_cookie(cookie=250)
flow_entry.set_flow_cookie_mask(cookie_mask=255)
flow_entry.set_flow_hard_timeout(hard_timeout=1200)
flow_entry.set_flow_idle_timeout(idle_timeout=3400)
# --- Instruction: 'Apply-actions'
# Actions: 'Output'
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=output_port)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# IP DSCP
# IP ECN
# IPv6 Source Address
# IPv6 Destination Address
# IPv6 Flow Label
# IP protocol number (ICMPv6)
# ICMPv6 Type
# ICMPv6 Code
# Metadata
match = Match()
match.set_eth_type(eth_type)
#.........这里部分代码省略.........
开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo20.py
示例11: of_demo_13
def of_demo_13():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 13 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# VLAN ID
# VLAN PCP
eth_type = ETH_TYPE_IPv4
eth_src = "00:00:00:11:23:ad"
eth_dst = "00:ff:29:01:19:61"
vlan_id = 100
vlan_pcp = PCP_CA # 'Critical Applications' (priority 3)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" VLAN ID (%s)\n"
" VLAN PCP(%s)"
% (hex(eth_type), eth_src,
eth_dst, vlan_id, vlan_pcp))
print (" Action: Output (to Physical Port Number)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 20
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_hard_timeout(0)
flow_entry.set_flow_idle_timeout(0)
flow_entry.set_flow_priority(1011)
# --- Instruction: 'Apply-actions'
# Action: 'Output' to port 7
instruction = Instruction(instruction_order=0)
action = OutputAction(order=0, port=7)
instruction.add_apply_action(action)
flow_entry.add_instruction(instruction)
# --- Match Fields: Ethernet Type
# Ethernet Source Address
# Ethernet Destination Address
# VLAN ID
# VLAN PCP
match = Match()
match.set_eth_type(eth_type)
match.set_eth_src(eth_src)
match.set_eth_dst(eth_dst)
match.set_vlan_id(vlan_id)
match.set_vlan_pcp(vlan_pcp)
flow_entry.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry)
status = result.get_status()
if(status.eq(STATUS.OK)):
print ("<<< Flow successfully added to the Controller")
else:
print ("\n")
print ("!!!Demo terminated, reason: %s" % status.brief().lower())
exit(0)
print ("\n")
print ("<<< Get configured flow from the Controller")
time.sleep(rundelay)
result = ofswitch.get_configured_flow(table_id, flow_id)
#.........这里部分代码省略.........
开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo13.py
示例12: print
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" % (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Input Port (%s)\n"
" MPLS Label (%s)"% (hex(eth_type), in_port, mpls_label))
print (" Action: Set Field (MPLS Label %s)\n"
" Output (Physical Port number %s)" % (new_mpls_label, output_port))
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_id = 29
flow_entry.set_flow_table_id(table_id)
flow_entry.set_flow_id(flow_id)
flow_entry.set_flow_name(flow_name = "Change MPLS Label")
flow_entry.set_flow_hard_timeout(hard_timeout = 0)
flow_entry.set_flow_idle_timeout(idle_timeout = 0)
flow_entry.set_flow_priority(flow_priority = 1022)
flow_entry.set_flow_cookie(cookie = 401)
flow_entry.set_flow_cookie_mask(cookie_mask = 255)
# --- Instruction: 'Apply-actions'
# Actions: 'Set Field'
# 'Output'
instruction = Instruction(instruction_order = 0)
开发者ID:jebpublic，项目名称:pybvcsamples，代码行数:30，代码来源:demo23.py
示例13: of_demo_43
def of_demo_43():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit(0)
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 43 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
(ctrlIpAddr, nodeName))
first_flow_id = 110
# ---------------------------------------------------
# First flow entry
# ---------------------------------------------------
table_id = 0
flow_id = first_flow_id
flow_name = "Set Queue example"
priority = 1000
cookie = 1400
match_in_port = 109
match_eth_type = ETH_TYPE_IPv4
match_ipv4_dst_addr = "10.0.0.0/8"
act_queue_id = 7
act_out_port = 112
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Input Port (%s)\n"
" Ethernet Type (%s)\n"
" IPv4 Destination Address (%s)" %
(match_in_port,
hex(match_eth_type),
match_ipv4_dst_addr))
print (" Actions: Set Queue (%s)\n"
" Output (%s)" %
(act_queue_id, act_out_port))
time.sleep(rundelay)
# Allocate a placeholder for the Flow Entry
flow_entry1 = FlowEntry()
# Generic attributes of the Flow Entry
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name)
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_hard_timeout(0)
flow_entry1.set_flow_idle_timeout(0)
# Instructions/Actions for the Flow Entry
instruction = Instruction(instruction_order=0)
action_order = 0
action = SetQueueAction(action_order)
action.set_gueue_id(act_queue_id)
instruction.add_apply_action(action)
action_order += 1
action = OutputAction(action_order)
action.set_outport(act_out_port)
instruction.add_apply_action(action)
flow_entry1.add_instruction(instruction)
# Match Fields for the Flow Entry
match = Match()
match.set_in_port(match_in_port)
match.set_eth_type(match_eth_type)
match.set_ipv4_dst(match_ipv4_dst_addr)
flow_entry1.add_match(match)
print ("\n")
print ("<<< Flow to send:")
print flow_entry1.get_payload()
time.sleep(rundelay)
result = ofswitch.add_modify_flow(flow_entry1)
#.........这里部分代码省略.........
开发者ID:s-garbuzov，项目名称:pybvc，代码行数:101，代码来源:demo43.py
示例14: print
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" VLAN ID (%s)\n"
" Input Port (%s)" % (hex(arp_eth_type), customer_vlan_id, customer_port))
print (" Action: Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Push VLAN (Ethernet Type %s)\n"
" Set Field (VLAN ID %s)\n"
" Output (Physical Port number %s)" % (hex(qinq_eth_type), provider_vlan_id,
hex(dot1q_eth_type), customer_vlan_id,
provider_port))
time.sleep(rundelay)
flow_id = first_flow_id
flow_entry1 = FlowEntry()
flow_entry1.set_flow_table_id(table_id)
flow_entry1.set_flow_name(flow_name = "[MLX1-A] Test flow (match:inport=110,arp;actions:push-QINQ-tag,mod_vlan=100,push-DOT1Q-tag,mod_vlan=998,output:111)")
flow_entry1.set_flow_id(flow_id)
flow_entry1.set_flow_hard_timeout(hard_timeout = 600)
flow_entry1.set_flow_idle_timeout(idle_timeout = 300)
flow_entry1.set_flow_priority(priority)
flow_entry1.set_flow_cookie(cookie)
flow_entry1.set_flow_cookie_mask(cookie_mask)
instruction = Instruction(instruction_order = 0)
action_order = 0
action = PushVlanHeaderAction(action_order)
action.set_eth_type(qinq_eth_type)
instruction.add_apply_action(action)
开发者ID:jebpublic，项目名称:pybvcsamples，代码行数:31，代码来源:demo25.py
示例15: of_demo_8
def of_demo_8():
f = "cfg.yml"
d = {}
if(load_dict_from_file(f, d) is False):
print("Config file '%s' read error: " % f)
exit()
try:
ctrlIpAddr = d['ctrlIpAddr']
ctrlPortNum = d['ctrlPortNum']
ctrlUname = d['ctrlUname']
ctrlPswd = d['ctrlPswd']
nodeName = d['nodeName']
rundelay = d['rundelay']
except:
print ("Failed to get Controller device attributes")
exit(0)
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
print ("<<< Demo 8 Start")
print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
ofswitch = OFSwitch(ctrl, nodeName)
# --- Flow Match: Ethernet Source Address
# Ethernet Destination Address
# IPv4 Source Address
# IPv4 Destination Address
# IP Protocol Number
# IP DSCP
# Input Port
# NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
eth_type = ETH_TYPE_IPv4
eth_src = "00:1c:01:00:23:aa"
eth_dst = "00:02:02:60:ff:fe"
ipv4_src = "10.0.245.1/24"
ipv4_dst = "192.168.1.123/16"
ip_proto = IP_PROTO_TLSP
ip_dscp = IP_DSCP_CS3 # 'Class Selector' = 'Flash'
input_port = 13
print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
% (ctrlIpAddr, nodeName))
print "\n"
print ("<<< Set OpenFlow flow on the Controller")
print (" Match: Ethernet Type (%s)\n"
" Ethernet Source Address (%s)\n"
" Ethernet Destination Address (%s)\n"
" IPv4 Source Address (%s)\n"
" IPv4 Destination Address (%s)\n"
" IP Protocol Number (%s)\n"
" IP DSCP (%s)\n"
" Input Port (%s)"
% (hex(eth_type), eth_src,
eth_dst, ipv4_src, ipv4_dst,
ip_proto, ip_dscp,
input_port))
print (" Action: Output (CONTROLLER)")
time.sleep(rundelay)
flow_entry = FlowEntry()
table_id = 0
flow_entry.set_flow_table_id(table_id)
flow_id = 15
flow_entry.s
|
客服电话
APP下载
官方微信
请发表评论