Python ofswitch.Instruction类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› Python›Python编程经验

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Python中pybvc.openflowdev.ofswitch.Instruction类的典型用法代码示例。如果您正苦于以下问题：Python Instruction类的具体用法？Python Instruction怎么用？Python Instruction使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了Instruction类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。

示例1: of_demo_15

def of_demo_15():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 15 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 VLAN ID
    #                 Input Port
    eth_type = ETH_TYPE_IPv4
    vlan_id = 100
    input_port = 3

    # --- Flow Actions: Push VLAN: Ethernet Type
    #                   Set Field: VLAN ID
    #                   Output:    Port Number
    push_eth_type = ETH_TYPE_DOT1AD  # 802.1ad VLAN tagged frame
    push_vlan_id = 200
    output_port = 5

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                VLAN ID (%s)\n"
           "                Input Port (%s)" %
           (hex(eth_type), vlan_id, input_port))
    print ("        Action: Push VLAN (Ethernet Type=%s)" %
           (hex(push_eth_type)))
    print ("                Set Field (VLAN ID=%s)" %
           (push_vlan_id))
    print ("                Output (to Physical Port Number %s)" %
           (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    flow_entry.set_flow_name(flow_name="Push VLAN")
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 22
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1013)
    flow_entry.set_flow_cookie(cookie=407)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=3400)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'PushVlan'
    #                  'SetField'
    #                  'Output'
    instruction = Instruction(instruction_order=0)
    action = PushVlanHeaderAction(order=0)
    action.set_eth_type(eth_type=push_eth_type)
    instruction.add_apply_action(action)
    action = SetFieldAction(order=1)
    action.set_vlan_id(vid=push_vlan_id)
    instruction.add_apply_action(action)
    action = OutputAction(order=2, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_vlan_id(vlan_id)
    match.set_in_port(in_port=input_port)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
#.........这里部分代码省略.........

开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo15.py

示例2: of_demo_40

def of_demo_40():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit(0)

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 40 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    first_flow_id = 110
    # ---------------------------------------------------
    # First flow entry
    # ---------------------------------------------------
    table_id = 0
    flow_id = first_flow_id
    flow_name = "Modify IP packet example1"
    priority = 900
    cookie = 1300

    match_in_port = 10
    match_eth_type = ETH_TYPE_IPv4
    match_ip_proto = IP_PROTO_TCP
    match_ipv4_src_addr = "192.1.2.0/24"
    match_ipv4_dst_addr = "173.194.123.40/32"
    match_tcp_dst_port = 8080

    act_mod_ipv4_src_addr = "212.16.1.8/32"
    act_mod_ipv4_dst_addr = "52.87.12.11/32"
    act_mod_tcp_src_port = 8888
    act_mod_tcp_dst_port = 9999
    act_out_port = 119

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Input Port (%s)\n"
           "                Ethernet Type (%s)\n"
           "                IP Protocol (%s)\n"
           "                IPv4 Source Address (%s)\n"
           "                IPv4 Destination Address (%s)\n"
           "                TCP Destination Port (%s)" %
           (match_in_port,
            hex(match_eth_type),
            match_ip_proto,
            match_ipv4_src_addr,
            match_ipv4_dst_addr,
            match_tcp_dst_port))
    print ("        Actions: Modify IPv4 Source Address (%s)\n"
           "                 Modify IPv4 Destination Address (%s)\n"
           "                 Modify TCP Source Port (%s)\n"
           "                 Modify TCP Destination Port (%s)\n"
           "                 Output (%s)" %
           (act_mod_ipv4_src_addr,
            act_mod_ipv4_dst_addr,
            act_mod_tcp_src_port,
            act_mod_tcp_dst_port,
            act_out_port))

    time.sleep(rundelay)

    # Allocate a placeholder for the Flow Entry
    flow_entry1 = FlowEntry()

    # Generic attributes of the Flow Entry
    flow_entry1.set_flow_table_id(table_id)
    flow_entry1.set_flow_name(flow_name)
    flow_entry1.set_flow_id(flow_id)
    flow_entry1.set_flow_cookie(cookie)
    flow_entry1.set_flow_priority(priority)
    flow_entry1.set_flow_hard_timeout(0)
    flow_entry1.set_flow_idle_timeout(0)

    # Instructions/Actions for the Flow Entry
    instruction = Instruction(instruction_order=0)

    action_order = 0
    action = SetNwSrcAction(action_order)
    action.set_nw_src(act_mod_ipv4_src_addr)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetNwDstAction(action_order)
#.........这里部分代码省略.........

开发者ID:s-garbuzov，项目名称:pybvc，代码行数:101，代码来源:demo40.py

示例3: of_demo_26

def of_demo_26():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 26 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    flow_table_id = 0
    flow_id_base = 12
    flow_id = flow_id_base
    flowEntries = []

    # Sample flow entry
    flow_entry = FlowEntry()
    flow_entry.set_flow_cookie(6001)
    flow_entry.set_flow_table_id(flow_table_id)
    flow_entry.set_flow_id(flow_id)
    flow_id += 1
    flow_entry.set_flow_idle_timeout(12000)
    flow_entry.set_flow_hard_timeout(12000)
    flow_entry.set_flow_priority(1000)

    instruction = Instruction(instruction_order=0)
    action = DropAction(order=0)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    match = Match()
    match.set_eth_type(ETH_TYPE_ARP)
    match.set_eth_src("00:11:22:33:44:55")
    match.set_eth_dst("aa:bb:cc:dd:ee:ff")
    flow_entry.add_match(match)

    flowEntries.append(flow_entry)

    # Sample flow entry
    flow_entry = FlowEntry()
    flow_entry.set_flow_cookie(7001)
    flow_entry.set_flow_table_id(flow_table_id)
    flow_entry.set_flow_id(flow_id)
    flow_id += 1
    flow_entry.set_flow_idle_timeout(2400)
    flow_entry.set_flow_hard_timeout(2400)
    flow_entry.set_flow_priority(2000)

    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="CONTROLLER", max_len=60)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    match = Match()
    match.set_eth_type(ETH_TYPE_IPv4)
    match.set_ipv4_src("1.2.3.4/32")
    match.set_ipv4_dst("192.168.1.11/32")
    flow_entry.add_match(match)

    flowEntries.append(flow_entry)

    # Sample flow entry
    flow_entry = FlowEntry()
    flow_entry.set_flow_cookie(800)
    flow_entry.set_flow_table_id(flow_table_id)
    flow_entry.set_flow_id(flow_id)
    flow_id += 1
    flow_entry.set_flow_hard_timeout(1800)
    flow_entry.set_flow_idle_timeout(1800)
    flow_entry.set_flow_priority(3000)

    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=5)
    instruction.add_apply_action(action)
    action = OutputAction(order=1, port=6)
    instruction.add_apply_action(action)
    action = OutputAction(order=2, port=7)
    instruction.add_apply_action(action)

    flow_entry.add_instruction(instruction)

    match = Match()
#.........这里部分代码省略.........

开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo26.py

示例4: origApp

def origApp(srcIp, destIp):
    f = "cfg.yml"
    d = {}
    if load_dict_from_file(f, d) == False:
        print ("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d["ctrlIpAddr"]
        ctrlPortNum = d["ctrlPortNum"]
        ctrlUname = d["ctrlUname"]
        ctrlPswd = d["ctrlPswd"]
        nodeName = d["nodeName"]
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    rundelay = 0

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)

    result = ctrl.get_openflow_nodes_operational_list()
    status = result.get_status()
    if status.eq(STATUS.OK) == True:
        print ('OpenFlow node names (composed as "openflow:datapathid"):')
        nodenames = result.get_data()
        print json.dumps(nodenames, indent=4)
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    idx = mktime(gmtime(0))

    for n in nodenames:
        ofswitch = OFSwitch(ctrl, n)

        # --- Flow Match:
        #                 IPv4 Source Address
        #                 IPv4 Destination Address
        #     NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
        eth_type = ETH_TYPE_IPv4
        ipv4_src = srcIp
        ipv4_dst = destIp

        print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" % (ctrlIpAddr, n))

        print "\n"
        print ("<<< Set OpenFlow flow on the Controller")
        print (
            "        Match:  Ethernet Type (%s)\n"
            "                IPv4 Source Address (%s)\n"
            "                IPv4 Destination Address (%s)\n" % (hex(eth_type), ipv4_src, ipv4_dst)
        )
        print ("        Action: Output (NORMAL)")

        time.sleep(rundelay)

        for i in range(0, 2):

            flow_entry = FlowEntry()
            table_id = 0
            flow_entry.set_flow_table_id(table_id)
            flow_id = 16 + idx
            idx = idx + 1
            flow_entry.set_flow_id(flow_id)
            flow_entry.set_flow_priority(flow_priority=1007)

            # --- Instruction: 'Apply-actions'
            #     Action:      'Output' NORMAL
            instruction = Instruction(instruction_order=0)
            action = OutputAction(order=0, port="NORMAL")
            instruction.add_apply_action(action)
            flow_entry.add_instruction(instruction)

            # --- Match Fields: Ethernet Type
            #                   Ethernet Source Address
            #                   Ethernet Destination Address
            #                   IPv4 Source Address
            #                   IPv4 Destination Address
            #                   IP Protocol Number
            #                   IP DSCP
            #                   IP ECN
            #                   TCP Source Port Number
            #                   TCP Destination Port Number
            #                   Input Port
            match = Match()
            match.set_eth_type(eth_type)
            if i == 0:
                match.set_ipv4_src(ipv4_src)
                match.set_ipv4_dst(ipv4_dst)
            else:
                match.set_ipv4_src(ipv4_dst)
                match.set_ipv4_dst(ipv4_src)

            flow_entry.add_match(match)
#.........这里部分代码省略.........

开发者ID:jebpublic，项目名称:brownBagApp2，代码行数:101，代码来源:brownBagApp2.py

示例5: of_demo_8

def of_demo_8():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 8 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")



    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Source Address
    #                 Ethernet Destination Address
    #                 IPv4 Source Address
    #                 IPv4 Destination Address
    #                 IP Protocol Number
    #                 IP DSCP
    #                 Input Port
    #     NOTE: Ethernet type MUST be 2048 (0x800) -> IPv4 protocol
    eth_type = ETH_TYPE_IPv4
    eth_src = "00:1c:01:00:23:aa"
    eth_dst = "00:02:02:60:ff:fe"
    ipv4_src = "10.0.245.1/24"
    ipv4_dst = "192.168.1.123/16"
    ip_proto = IP_PROTO_TLSP
    ip_dscp = IP_DSCP_CS3  # 'Class Selector' = 'Flash'
    input_port = 13

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
           % (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Ethernet Source Address (%s)\n"
           "                Ethernet Destination Address (%s)\n"
           "                IPv4 Source Address (%s)\n"
           "                IPv4 Destination Address (%s)\n"
           "                IP Protocol Number (%s)\n"
           "                IP DSCP (%s)\n"
           "                Input Port (%s)"
           % (hex(eth_type), eth_src,
              eth_dst, ipv4_src, ipv4_dst,
              ip_proto, ip_dscp,
              input_port))
    print ("        Action: Output (CONTROLLER)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 15
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1006)
    flow_entry.set_flow_cookie(cookie=100)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' to CONTROLLER
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port="CONTROLLER", max_len=60)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   IPv4 Source Address
    #                   IPv4 Destination Address
    #                   IP Protocol Number
    #                   IP DSCP
    #                   Input Port
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_ipv4_src(ipv4_src)
    match.set_ipv4_dst(ipv4_dst)
    match.set_ip_proto(ip_proto)
    match.set_ip_dscp(ip_dscp)
    match.set_in_port(input_port)
    flow_entry.add_match(match)

#.........这里部分代码省略.........

开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo8.py

示例6: of_demo_16

def of_demo_16():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 16 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 IPv6 Source Address
    #                 IPv6 Destination Address
    eth_type = ETH_TYPE_IPv6
    ipv6_src = "fe80::2acf:e9ff:fe21:6431/128"
    ipv6_dst = "aabb:1234:2acf:e9ff::fe21:6431/64"

    # --- Flow Actions: Output (CONTROLLER)
    output_port = "CONTROLLER"

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                IPv6 Source Address (%s)\n"
           "                IPv6 Destination Address (%s)" %
           (hex(eth_type), ipv6_src, ipv6_dst))
    print ("        Action: Output (to %s)" %
           (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    fname = "match=ipv6_src,ipv6_dst;actions=output:Controller"
    flow_entry.set_flow_name(flow_name=fname)
    table_id = 0
    flow_id = 23
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1014)
    flow_entry.set_flow_cookie(cookie=408)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=3400)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Output'
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   IPv6 Source Address
    #                   IPv6 Destination Address
    match = Match()
    match.set_eth_type(eth_type)
    match.set_ipv6_src(ipv6_src)
    match.set_ipv6_dst(ipv6_dst)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
    result = ofswitch.get_configured_flow(table_id, flow_id)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully read from the Controller")
        print ("Flow info:")
        flow = result.get_data()
#.........这里部分代码省略.........

开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo16.py

示例7: FlowEntry

 
 flow_entry = FlowEntry()
 table_id = 0
 flow_id = 26
 flow_entry.set_flow_table_id(table_id)
 flow_entry.set_flow_name(flow_name = "demo20.py")
 flow_entry.set_flow_id(flow_id)
 flow_entry.set_flow_priority(flow_priority = 1019)
 flow_entry.set_flow_cookie(cookie = 250)
 flow_entry.set_flow_cookie_mask(cookie_mask = 255)
 flow_entry.set_flow_hard_timeout(hard_timeout = 1200)
 flow_entry.set_flow_idle_timeout(idle_timeout = 3400)
 
 # --- Instruction: 'Apply-actions'
 #     Actions:     'Output'
 instruction = Instruction(instruction_order = 0)
 action = OutputAction(order = 0, port = output_port)
 instruction.add_apply_action(action)
 flow_entry.add_instruction(instruction)
 
 # --- Match Fields: Ethernet Type
 #                   IP DSCP
 #                   IP ECN
 #                   IPv6 Source Address
 #                   IPv6 Destination Address
 #                   IPv6 Flow Label
 #                   IP protocol number (ICMPv6)
 #                   ICMPv6 Type
 #                   ICMPv6 Code
 #                   Metadata
 match = Match()

开发者ID:jebpublic，项目名称:pybvcsamples，代码行数:30，代码来源:demo20.py

示例8: of_demo_37

def of_demo_37():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit(0)

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 37 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    first_flow_id = 110
    # ---------------------------------------------------
    # First flow entry
    # ---------------------------------------------------
    table_id = 0
    flow_id = first_flow_id
    flow_name = "Modify VLAN ID and VLAN priority example1"
    priority = 600
    cookie = 1000

    match_in_port = 109
    match_eth_type = ETH_TYPE_IPv4
    match_vlan_id = 100

    act_mod_vlan_id = 172
    act_mod_vlan_pcp = 2
    act_out_port = 112

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Input Port (%s)\n"
           "                Ethernet Type (%s)\n"
           "                VLAN ID (%s)" %
           (match_in_port,
            hex(match_eth_type),
            match_vlan_id))
    print ("        Actions: Set VLAN ID (%s)\n"
           "                 Set VLAN priority (%s)\n"
           "                 Output (%s)" %
           (act_mod_vlan_id, act_mod_vlan_pcp, act_out_port))

    time.sleep(rundelay)

    # Allocate a placeholder for the Flow Entry
    flow_entry1 = FlowEntry()

    # Generic attributes of the Flow Entry
    flow_entry1.set_flow_table_id(table_id)
    flow_entry1.set_flow_name(flow_name)
    flow_entry1.set_flow_id(flow_id)
    flow_entry1.set_flow_cookie(cookie)
    flow_entry1.set_flow_priority(priority)
    flow_entry1.set_flow_hard_timeout(0)
    flow_entry1.set_flow_idle_timeout(0)

    # Instructions/Actions for the Flow Entry
    instruction = Instruction(instruction_order=0)

    action_order = 0
    action = SetVlanIdAction(action_order)
    action.set_vid(act_mod_vlan_id)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetVlanPCPAction(action_order)
    action.set_vlan_pcp(act_mod_vlan_pcp)
    instruction.add_apply_action(action)

    action_order += 1
    action = OutputAction(action_order)
    action.set_outport(act_out_port)
    instruction.add_apply_action(action)

    flow_entry1.add_instruction(instruction)

    # Match Fields for the Flow Entry
    match = Match()

    match.set_in_port(match_in_port)
    match.set_eth_type(match_eth_type)
    match.set_vlan_id(match_vlan_id)

#.........这里部分代码省略.........

开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo37.py

示例9: of_demo_38

def of_demo_38():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit(0)

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 38 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    first_flow_id = 110
    # ---------------------------------------------------
    # First flow entry
    # ---------------------------------------------------
    table_id = 0
    flow_id = first_flow_id
    flow_name = "Modify source and destination MAC addresses example1"
    priority = 700
    cookie = 1100

    match_in_port = 109
    match_eth_type = ETH_TYPE_IPv4
    match_ipv4_src_addr = "10.0.0.4/32"

    act_mod_src_mac_addr = "00:00:00:11:23:ae"
    act_mod_dst_mac_addr = "a0:ff:29:01:19:61"
    act_out_port = 112

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Input Port (%s)\n"
           "                Ethernet Type (%s)\n"
           "                IPv4 Source Address (%s)" %
           (match_in_port,
            hex(match_eth_type),
            match_ipv4_src_addr))
    print ("        Actions: Modify Ethernet Source MAC Address (%s)\n"
           "                 Modify Ethernet Destination MAC Address (%s)\n"
           "                 Output (%s)" %
           (act_mod_src_mac_addr, act_mod_dst_mac_addr, act_out_port))

    time.sleep(rundelay)

    # Allocate a placeholder for the Flow Entry
    flow_entry1 = FlowEntry()

    # Generic attributes of the Flow Entry
    flow_entry1.set_flow_table_id(table_id)
    flow_entry1.set_flow_name(flow_name)
    flow_entry1.set_flow_id(flow_id)
    flow_entry1.set_flow_cookie(cookie)
    flow_entry1.set_flow_priority(priority)
    flow_entry1.set_flow_hard_timeout(0)
    flow_entry1.set_flow_idle_timeout(0)

    # Instructions/Actions for the Flow Entry
    instruction = Instruction(instruction_order=0)

    action_order = 0
    action = SetDlSrcAction(action_order)
    action.set_dl_src(act_mod_src_mac_addr)
    instruction.add_apply_action(action)

    action_order += 1
    action = SetDlDstAction(action_order)
    action.set_dl_dst(act_mod_dst_mac_addr)
    instruction.add_apply_action(action)

    action_order += 1
    action = OutputAction(action_order)
    action.set_outport(act_out_port)
    instruction.add_apply_action(action)

    flow_entry1.add_instruction(instruction)

    # Match Fields for the Flow Entry
    match = Match()

    match.set_in_port(match_in_port)
    match.set_eth_type(match_eth_type)
    match.set_ipv4_src(match_ipv4_src_addr)

#.........这里部分代码省略.........

开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo38.py

示例10: of_demo_13

def of_demo_13():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 13 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")



    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 Ethernet Source Address
    #                 Ethernet Destination Address
    #                 VLAN ID
    #                 VLAN PCP
    eth_type = ETH_TYPE_IPv4
    eth_src = "00:00:00:11:23:ad"
    eth_dst = "00:ff:29:01:19:61"
    vlan_id = 100
    vlan_pcp = PCP_CA  # 'Critical Applications' (priority 3)

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'"
           % (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                Ethernet Source Address (%s)\n"
           "                Ethernet Destination Address (%s)\n"
           "                VLAN ID (%s)\n"
           "                VLAN PCP(%s)"
           % (hex(eth_type), eth_src,
              eth_dst, vlan_id, vlan_pcp))
    print ("        Action: Output (to Physical Port Number)")

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_entry.set_flow_table_id(table_id)
    flow_id = 20
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_hard_timeout(0)
    flow_entry.set_flow_idle_timeout(0)
    flow_entry.set_flow_priority(1011)

    # --- Instruction: 'Apply-actions'
    #     Action:      'Output' to port 7
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=7)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   Ethernet Source Address
    #                   Ethernet Destination Address
    #                   VLAN ID
    #                   VLAN PCP
    match = Match()
    match.set_eth_type(eth_type)
    match.set_eth_src(eth_src)
    match.set_eth_dst(eth_dst)
    match.set_vlan_id(vlan_id)
    match.set_vlan_pcp(vlan_pcp)
    flow_entry.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    print flow_entry.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.brief().lower())
        exit(0)

    print ("\n")
    print ("<<< Get configured flow from the Controller")
    time.sleep(rundelay)
    result = ofswitch.get_configured_flow(table_id, flow_id)
#.........这里部分代码省略.........

开发者ID:pruiksmalw，项目名称:pybvc，代码行数:101，代码来源:demo13.py

示例11: of_demo_36


#.........这里部分代码省略.........
    # First flow entry
    # ---------------------------------------------------
    table_id = 0
    flow_id = first_flow_id
    flow_name = "Group action example"
    priority = 1000
    cookie = 1400

    match_in_port = 109
    match_eth_type = ETH_TYPE_IPv4

    print "\n".strip()
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match: Input Port (%s)\n"
           "               Ethernet Type (%s)" %
           (match_in_port, hex(match_eth_type)))
    print ("        Actions: Apply Group (%s)\n" % group_id)

    time.sleep(rundelay)

    # Allocate a placeholder for the Flow Entry
    flow_entry1 = FlowEntry()

    # Generic attributes of the Flow Entry
    flow_entry1.set_flow_table_id(table_id)
    flow_entry1.set_flow_name(flow_name)
    flow_entry1.set_flow_id(flow_id)
    flow_entry1.set_flow_cookie(cookie)
    flow_entry1.set_flow_priority(priority)
    flow_entry1.set_flow_hard_timeout(0)
    flow_entry1.set_flow_idle_timeout(0)

    # Instructions/Actions for the Flow Entry
    instruction = Instruction(instruction_order=0)

    action_order = 0
    action = GroupAction(action_order)
    action.set_group_id(group_id)
    instruction.add_apply_action(action)

    flow_entry1.add_instruction(instruction)

    # Match Fields for the Flow Entry
    match = Match()

    match.set_in_port(match_in_port)
    match.set_eth_type(match_eth_type)

    flow_entry1.add_match(match)

    print ("<<< Flow to send:")
    print flow_entry1.get_payload()
    time.sleep(rundelay)
    result = ofswitch.add_modify_flow(flow_entry1)
    status = result.get_status()
    if(status.eq(STATUS.OK)):
        print ("<<< Flow successfully added to the Controller")
    else:
        print ("\n")
        print ("!!!Demo terminated, reason: %s" % status.detailed())
        delete_groups(ofswitch, grp_ids_cfg)
        delete_flows(ofswitch, table_id, range(first_flow_id, flow_id + 1))
        exit(0)

    print "\n".strip()
    print ("<<< Remove all flows from the Controller")

开发者ID:BillTheBest，项目名称:pybvc，代码行数:67，代码来源:demo36.py

示例12: of_demo_20

def of_demo_20():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit()

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 20 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    # --- Flow Match: Ethernet Type
    #                 IP DSCP
    #                 IP ECN
    #                 IPv6 Source Address
    #                 IPv6 Destination Address
    #                 IPv6 Flow Label
    #                 ICMPv6 type
    #                 ICMPv6 Code
    #                 Metadata
    eth_type = ETH_TYPE_IPv6
    ip_dscp = IP_DSCP_CS7  # 'Class Selector' = 'Network'
    ip_ecn = IP_ECN_CE     # 'Congestion Encountered'
    ipv6_src = "1234:5678:9ABC:DEF0:FDCD:A987:6543:210F/76"
    ipv6_dst = "2000:2abc:edff:fe00::3456/94"
    ipv6_flabel = 15
    ip_proto = IP_PROTO_ICMPv6
    icmpv6_type = 1        # 'Destination Unreachable'
    icmpv6_code = 3        # 'Address Unreachable'
    metadata = "0x0123456789ABCDEF"

    # --- Flow Actions: Output (CONTROLLER)
    output_port = "CONTROLLER"

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Ethernet Type (%s)\n"
           "                IP DSCP (%s)\n"
           "                IP ECN (%s)\n"
           "                IPv6 Source Address (%s)\n"
           "                IPv6 Destination Address (%s)\n"
           "                IPv6 Flow Label (%s)\n"
           "                ICMPv6 Type (%s)\n"
           "                ICMPv6 Code (%s)\n"
           "                Metadata (%s)" %
           (hex(eth_type), ip_dscp, ip_ecn,
            ipv6_src, ipv6_dst, ipv6_flabel,
            icmpv6_type, icmpv6_code, metadata))
    print ("        Action: Output (to %s)" % (output_port))

    time.sleep(rundelay)

    flow_entry = FlowEntry()
    table_id = 0
    flow_id = 26
    flow_entry.set_flow_table_id(table_id)
    flow_entry.set_flow_name(flow_name="demo20.py")
    flow_entry.set_flow_id(flow_id)
    flow_entry.set_flow_priority(flow_priority=1019)
    flow_entry.set_flow_cookie(cookie=250)
    flow_entry.set_flow_cookie_mask(cookie_mask=255)
    flow_entry.set_flow_hard_timeout(hard_timeout=1200)
    flow_entry.set_flow_idle_timeout(idle_timeout=3400)

    # --- Instruction: 'Apply-actions'
    #     Actions:     'Output'
    instruction = Instruction(instruction_order=0)
    action = OutputAction(order=0, port=output_port)
    instruction.add_apply_action(action)
    flow_entry.add_instruction(instruction)

    # --- Match Fields: Ethernet Type
    #                   IP DSCP
    #                   IP ECN
    #                   IPv6 Source Address
    #                   IPv6 Destination Address
    #                   IPv6 Flow Label
    #                   IP protocol number (ICMPv6)
    #                   ICMPv6 Type
    #                   ICMPv6 Code
    #                   Metadata
    match = Match()
    match.set_eth_type(eth_type)
#.........这里部分代码省略.........

开发者ID:BillTheBest，项目名称:pybvc，代码行数:101，代码来源:demo20.py

示例13: of_demo_43

def of_demo_43():
    f = "cfg.yml"
    d = {}
    if(load_dict_from_file(f, d) is False):
        print("Config file '%s' read error: " % f)
        exit(0)

    try:
        ctrlIpAddr = d['ctrlIpAddr']
        ctrlPortNum = d['ctrlPortNum']
        ctrlUname = d['ctrlUname']
        ctrlPswd = d['ctrlPswd']
        nodeName = d['nodeName']
        rundelay = d['rundelay']
    except:
        print ("Failed to get Controller device attributes")
        exit(0)

    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")
    print ("<<< Demo 43 Start")
    print ("<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<")

    ctrl = Controller(ctrlIpAddr, ctrlPortNum, ctrlUname, ctrlPswd)
    ofswitch = OFSwitch(ctrl, nodeName)

    print ("<<< 'Controller': %s, 'OpenFlow' switch: '%s'" %
           (ctrlIpAddr, nodeName))

    first_flow_id = 110
    # ---------------------------------------------------
    # First flow entry
    # ---------------------------------------------------
    table_id = 0
    flow_id = first_flow_id
    flow_name = "Set Queue example"
    priority = 1000
    cookie = 1400

    match_in_port = 109
    match_eth_type = ETH_TYPE_IPv4
    match_ipv4_dst_addr = "10.0.0.0/8"

    act_queue_id = 7
    act_out_port = 112

    print "\n"
    print ("<<< Set OpenFlow flow on the Controller")
    print ("        Match:  Input Port (%s)\n"
           "                Ethernet Type (%s)\n"
           "                IPv4 Destination Address (%s)" %
           (match_in_port,
            hex(match_eth_type),
            match_ipv4_dst_addr))
    print ("        Actions: Set Queue (%s)\n"
           "                 Output (%s)" %
           (act_queue_id, act_out_port))

    time.sleep(rundelay)

    # Allocate a placeholder for the Flow Entry
    flow_entry1 = FlowEntry()

    # Generic attributes of the Flow Entry
    flow_entry1.set_flow_table_id(table_id)
    flow_entry1.set_flow_name(flow_name)
    flow_entry1.set_flow_id(flow_id)
    flow_entry1.set_flow_cookie(cookie)
    flow_entry1.set_flow_priority(priority)
    flow_entry1.set_flow_hard_timeout(0)
    flow_entry1.set_flow_idle_timeout(0)

    # Instructions/Actions for the Flow Entry
    instruction = Instruction(instruction_order=0)

    action_order = 0
    action = SetQueueAction(action_order)
    action.set_gueue_id(act_queue_id)
    instruction.add_apply_action(action)

    action_order += 1
    action = OutputAction(action_order)
    action.set_outport(act_out_port)
    instruction.add_apply_action(action)

    flow_entry1.add_instruction(instruction)

    # Match Fields for the Flow Entry
    match = Match()

    match.set_in_port(match_in_port)
    match.set_eth_type(match_eth_type)
    match.set_ipv4_dst(match_ipv4_dst_addr)

    flow_entry1.add_match(match)

    print ("\n")
    print ("<<< Flow to send:")
    p

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

Python ofswitch.Match类代码示例发布时间：2022-05-25

Python ofswitch.FlowEntry类代码示例发布时间：2022-05-25

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

2022-05-27

Python util.get_webmention_target函数代

2022-05-27

Python util.get_uuid函数代码示例

2022-05-27

Python util.get_type_by_name函数代码示例

2022-05-27

Python util.get_stdout函数代码示例

2022-05-27

阅读排行榜

1 Python 入门教程

Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P

阅读：13759|2022-01-22

2 Python wikiutil.getFrontPage函数代码示例

Python wikiutil.getFrontPage函数代码示例

阅读：9081|2022-05-24

3 Python 简介

Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本

阅读：4061|2022-01-22

4 Python tests.group函数代码示例

Python tests.group函数代码示例

阅读：4038|2022-05-27

5 Python util.check_if_user_has_permission

Python util.check_if_user_has_permission函数代码示例

阅读：3816|2022-05-27

6 Python 操练实例98

Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大

阅读：3498|2022-01-22

7 Python 环境搭建

Python 环境搭建本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py

阅读：3020|2022-01-22

8 Python output.darkgreen函数代码示例

Python output.darkgreen函数代码示例

阅读：2634|2022-05-25

9 Python 基础语法

Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也

阅读：2621|2022-01-22

10 Python 中文编码

Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没

阅读：2289|2022-01-22

客服电话

电子邮件

Python ofswitch.Instruction类代码示例

示例1: of_demo_15

示例2: of_demo_40

示例3: of_demo_26

示例4: origApp

示例5: of_demo_8

示例6: of_demo_16

示例7: FlowEntry

示例8: of_demo_37

示例9: of_demo_38

示例10: of_demo_13

示例11: of_demo_36

示例12: of_demo_20

示例13: of_demo_43

请发表评论

全部评论

上一篇：

下一篇：

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.grid_equal函数代码示例

Python util.get_worker_name函数代码示例

Python util.get_webmention_target函数代

Python util.get_uuid函数代码示例

Python util.get_type_by_name函数代码示例

Python util.get_stdout函数代码示例

关于我们

产品与服务

解决方案

139-2527-9053