• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

Overv/MineAssemble: A tiny bootable Minecraft clone written partly in x86 assemb ...

原作者: [db:作者] 来自: 网络 收藏 邀请

开源软件名称(OpenSource Name):

Overv/MineAssemble

开源软件地址(OpenSource Url):

https://github.com/Overv/MineAssemble

开源编程语言(OpenSource Language):

Assembly 78.8%

开源软件介绍(OpenSource Introduction):

MineAssemble

 

Prebuilt ISO - Video

MineAssemble is a tiny bootable Minecraft clone written partly in x86 assembly. I made it first and foremost because a university assignment required me to implement a game in assembly for a computer systems course. Because I had never implemented anything more complex than a "Hello World" bootloader before, I decided I wanted to learn about writing my own kernel code at the same time.

Note that the goal of this project was not to write highly efficient hand-optimized assembly code, but rather to have fun and write code that balances readability and speed. This is primarily accomplished by proper commenting and consistent code structuring.

Starting in assembly right away would be a bit too insane, so I first wrote a reference implementation in C using the SDL library, which can be found in the reference directory. I started writing it with the idea that if it was longer than 150 statements excluding boilerplate, it wouldn't be worth doing it in assembly. Like all estimates in the world of programming, this limit turned out to be a gross underestimate, reaching about 134 lines before adding the texture or even the input code.

After completing the reference code, I wrote the kernel boilerplate code (setting up VGA, interrupts, etc.) and changed the reference C code to work with this. Then I began slowly porting everything to handwritten assembly.

Unfortunately this turned out to be a lot more work than I expected, so currently a large fraction of the codebase is still in C. Slowly porting everything to assembly is an ongoing process. The code also isn't fully compatible with all systems yet. It seems to cause floating point exceptions on some setups.

How to play

QEMU

To run the game with QEMU, simply run make test This is a quick and easy way to play around with it.

Virtual machine

If you want to use virtualization software like VirtualBox, you can produce an .iso image with make iso and mount it. The virtual machine doesn't need a hard drive and requires no more than 4 MB of RAM.

You can also burn this image to a CD or DVD, but that is rather wasteful. Use the USB stick method to try it on real hardware unless it really isn't an option for some reason.

USB stick

Booting from an USB stick is an excellent way to try it on real hardware, but does involve a little bit more work. Note that this process will remove all data currently on the USB stick. Also, make sure to get the drive name right or you might accidentally wipe your hard drive!

  1. Format your USB stick to FAT32 with 1 MB free space preceding.
  2. Mount it using mount /dev/sdx1 /mnt where sdx is the drive name.
  3. Turn it into a GRUB rescue disk with grub-install --no-floppy --root-directory=/mnt /dev/sdx.
  4. Run make iso and copy the contents of the iso directory to the USB stick.
  5. Unmount with umount -l /dev/sdx1.

Now reboot your PC and boot from USB.

Debugging with GDB and QEMU

qemu-system-i368 -gdb tcp::1234 -S -kernel mineassemble.elf
i686-pc-elf-gdb mineassemble.elf
(gdb) target remote :1234
(gdb) continue

Building a cross compiler toolchain

In order to build MineAssemble, you need to have a cross compiler toolchain consisting of the GNU Binutils and GNU C Compiler (GCC). The toolchain must be built for i686-pc-elf target. For legacy reasons, GNU GCC and Binutils are configured at compile time and you will need to compile them from source to create a cross compiler toolchain. You will also need the NASM Assembler.

In addition, you might need QEMU for testing MineAssemble in an emulator and the GNU Debugger (GDB) for debugging.

Installing prerequisites

You will need to install a handful of utility libraries to build Binutils, GCC, QEMU and GDB.

Use your operating system's equivalent for apt-get or compile from source.

Install libmpc, libgmp, libmpfr (required for binutils, gcc and gdb)

sudo apt-get install libmpc-dev libgmp-dev libmpfr-dev

Install flex and bison (required for GCC)

sudo apt-get install flex bison

Install libsdl (optional front end for qemu)

sudo apt-get install libsdl-dev

Install NASM

NASM does not need to be configured at compile time, you can install it using your package manager.

sudo apt-get install nasm

Create directories for source, build files and binaries

mkdir ~/src                 # Source code
mkdir ~/i686-pc-elf-build   # Temporary build files
mkdir ~/i686-pc-elf         # Toolchain install destination

Get source code for Binutils, GCC, QEMU and GDB

git clone git://sourceware.org/git/binutils.git ~/src/binutils
git clone git://gcc.gnu.org/git/gcc.git ~/src/gcc
git clone git://git.qemu-project.org/qemu.git ~/src/qemu
git clone git://sourceware.org/git/gdb.git ~/src/gdb

Check out latest release versions

cd ~/src/binutils ; git checkout binutils-2_23_1
cd ~/src/gcc ; git checkout gcc-4_8-branch
cd ~/src/qemu ; git checkout v1.5.0
cd ~/src/gdb ; git checkout gdb_7_6-branch

Build binutils for target i686-pc-elf

mkdir ~/i686-pc-elf-build/binutils ; cd ~/i686-pc-elf-build/binutils
~/src/binutils/configure --prefix=$HOME/i686-pc-elf --target=i686-pc-elf --disable-shared --disable-nls
make -j 4  # parallel make for 4 cpus
make install

Build GCC (C compiler only) for target i686-pc-elf

mkdir ~/i686-pc-elf-build/gcc ; cd ~/i686-pc-elf-build/gcc
~/src/gcc/configure --prefix=$HOME/i686-pc-elf --target=i686-pc-elf --enable-languages=c --disable-shared --disable-nls
make -j 4 all-gcc
make install-gcc

Build qemu with i386-softmmu target (with SDL front end)

mkdir ~/i686-pc-elf-build/qemu ; cd ~/i686-pc-elf-build/qemu
~/src/qemu/configure --prefix=$HOME/i686-pc-elf --target-list=i386-softmmu --enable-sdl
make -j 4
make install

Build GDB for i686-pc-elf target

mkdir ~/i686-pc-elf-build/gdb ; cd ~/i686-pc-elf-build/gdb
~/src/gdb/configure --prefix=$HOME/i686-pc-elf --target=i686-pc-elf
make -j 4
make install

Add toolchain to $PATH

export PATH=$HOME/i686-pc-elf/bin:$PATH

Style conventions

With something as low-level as assembly, you quickly risk writing unreadable code if you don't have proper style conventions. This project uses the following identifier name conventions:

WORLD_SX - C-style define, usually allowing you to configure things
worldSX - Non-local variable (local vars are referred to by stack offsets)
init_world - Subroutine (uses underscores instead of camelCase)
.main_loop - Local label, only used from within subroutine

Variable names carry no type prefix, because it is almost always very clear what type a variable uses from its name or usage. Here are some examples:

float - vectors, angles, distance
int - time, block coordinates, block normal
byte - palette color, block type

Directives that apply to segments of a file or the whole file, such as

[bits 32]
section .text

have no indentation. Subroutines and local labels have one level of indentation and code or data within have two levels of indentation. One level of indentation is equal to 4 spaces.

Code is commonly separated in blocks with a comment above describing what is done in the block. If a line requires extra explanation, a comment is placed after the instruction.

Floating point math expressions are systematically converted from the reference infix expression to RPN (Reverse Polish Notation) to FPU instructions. Any optimizations are applied afterwards if deemed necessary. This systematic approach makes converting single-line C expressions to dozens of assembly instructions bearable and relatively error-free.

Explanation

The inner workings of this demo are really quite straight-forward. The code can be divided into four different components.

World

The world is stored as an unsigned byte array where every block has a value of either BLOCK_AIR or BLOCK_DIRT. The array is stored in the BSS section and is initialized by the init_world function. It loops over every x, y and z and creates a world where the lower half is dirt and the upper half is air.

While playing, other code calls set_block or get_block to interact with the world. These simply calculate the correct index and write to or read from the array.

Input and collision

Keyboard input is collected by an IRQ1 interrupt handler. It writes the up/down state to a 128-byte array indexed by the scan code. It also sets the upper bit to 1 to mark that key as updated. It ignores a key down event if the key is already set to down to ignore automatic key repeats.

Because the input handling needs to be independent of performance, an IRQ0 interrupt handler increases a time variable by 1 every millisecond to keep track of time. This is used to compute a delta time to scale movement by.

Before every frame is rendered, the handle_input function is called and collects the values from the keys array written to by the interrupt handler. If the upper bit of a cell is set to 1, then it knows that the key state has changed and processes it accordingly. All keys except for the movement keys (AWSD) are handled here.

After that, the update function is called to move the player according to the current velocity. This velocity is controlled partly by the handle_input function and partly by checking the down state of the AWSD keys in this function. The Y velocity is decreased to simulate gravity. Then the next player position is determined by adding the velocity multiplied by delta time.

Before the new position is assigned, the code first runs the handle_collision function for the head, center of the body and feet. It calls the raytrace function from these positions with the velocity as direction to determine if a collision will occur if the player moves to the new position. If that is the case, the velocity is corrected to mostly prevent collision. (The algorithm is not perfect, but it works pretty well.)

Rendering

Normally games use rasterization to render and this is very fast. Unfortunately a graphics library like OpenGL is not available at this level. Instead, code needs to be written that writes directly to the graphics memory. At this point, I had two choices: write my own rasterizer or implement a raytracer. I decided to go with raytracing, because:

  • It's much more straight-forward by simply computing the color per pixel
  • It's cool, because it allows for easy effects like raytraced shadows
  • It's fast enough, because we have a uniform 3D grid

The raytrace algorithm computes the distance to reach the sides of the block the ray starts in for every dimension. The shortest distance wins and the ray position is moved by that distance times the ray direction. This is repeated until the position is inside a BLOCK_DIRT or if it's out of the world. The final position is used to compute the side that was hit and the texture coordinates. The ray_color function is then called to let the block decide what color it's going to output. This function calls the raytrace function again to decide whether the pixel is shadowed or not by using the sunDir direction for the ray. It prevents infinite recursion by requesting an info raytrace instead of a color raytrace. This alternative returns a struct with hit info instead of a color.

Resources

One of the details you deal with when using a low-level VGA mode (mode 0x13) is that you can't just specify 24-bit or 32-bit RGB color for every pixel. Instead, you have to decide on a 256 color palette and specify an index for every pixel. The easy solution here is to use 3-2-3 bit channels and use an RGB color as index into the palette. Unfortunately this doesn't work at all, because with only 4 options for the green color channel, there's no way to represent all the subtle different shades of a grass block.

So I decided to generate a palette that could represent every color that the textures used exactly, well almost exactly. The palette does allow you to specify RGB colors, but with only 6 bits per channel instead of 8. That means that colors will be slightly off, but this is pretty much unnoticeable.

I wrote a program in C# that took the grass, dirt and side textures along with the reserved colors black, white and sky and automatically generated a palette and a palette colored representation of the three textures. This ended up working perfectly!

The splash screen works slightly differently. The reason that it's a bitmap instead of just using text mode is to make things a bit more streamlined. I first tried encoding it the same way as the textures, but this resulted in a 6400 line C file. Then I changed it to simply write a string of 1's and 0's for every line, which works much better. It even allows you to view the splash screen using a text editor! :-)

The bitmap of the splash screen is copied directly to VGA memory where '0' is subtracted from every byte. The keys array is then checked for an ENTER key press before the game is loaded. A problem here is that the user has to press ENTER in the GRUB bootloader menu as well, which means it would skip the splash screen immediately. That problem is currently solved by waiting for an ENTER key press twice. Somehow this even works when booting with Ctrl-X or another combination.

License

This project is licensed under the MIT license.

Some derived work with compatible licensing is also included:

Derived work here means that the code was adapted to fit the requirements of this project.




鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
taoneill/war: War - Minecraft TDM & CTF for Bukkit发布时间:2022-08-16
下一篇:
mcbut/MinecraftBut: 发布时间:2022-08-16
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap