optional, service name ('tahoma', 'connexoon_rts', 'cozytouch' or 'rexel')
user
String
null
mandatory, your service account username
password
String
null
mandatory, your service account password
pollingPeriod
Integer
30
optional, bridge polling period in seconds
refreshPeriod
Integer
30
optional, device states refresh period in minutes
exclude
String[]
[]
optional, list of protocols (hue,enocean,zwave,io,rts), ui name, widget name or device name to exclude
exposeScenarios
Boolean
false
optional, expose TaHoma/Connexoon/Cozytouch scenarios as HomeKit switches. Could also specify a list of string corresponding to scenarios names to expose
devicesConfig
Object[]
[]
optional list of device specific configuration (see below)
Specific device configuration
This option allows you to apply a specific configuation to device or group of device.
One configuration is composed of a key attribute containing device name, widget, uiClass, protocol or unique identifier and as many parameter depending of device type.
{
"key": "Bedroom door",
"param1": "value1"
...
}
Alarm parameters
Type
Default
Note
stayZones
String
'A'
optional, active zones (A,B,C) in 'Stay' mode
nightZones
String
'B'
optional, active zones (A,B,C) in 'Night' mode
occupancySensor
Boolean
false
optional, add an occupancy widget linked to the alarm
WindowCovering parameters
Type
Default
Note
defaultPosition
Integer
0
optional, final position for UpDown rollershutter after any command
reverse
Boolean
false
optional, reverse up/down in case of bad mounting
lowSpeed
Boolean / String
false
optional, use low speed for roller shutter supporting it. If string, specify slot time with format "HH:MM-HH:MM". Low speed will be enabled between them.
blindMode
String
null
optional, change main slider action to orientation. By default, both closure and orientation will be set. When setting blindMode: true the blinds work in the following way: Opening the blinds or setting them to 100% will fully open them. Closing the blinds or setting them to 0% will fully close them. Setting the blinds to a value between 1% and 99% will first close the blinds and then adjust thier horizontal tilt in a way that 99% means fully horizonal = more light, and 1% means nearly closed = less light.
blindsOnRollerShutter
Boolean
false
optional, when blinds are installed on roller shutter motors allow slats to stay horizontal (opened) at intermediate position
movementDuration
Integer
0
optional, duration of a full shutter movement from 'open' to 'close' in seconds. Will be used to approximate shutter intermediate position. (0 = disable feature)
GarageDoorOpener parameters
Type
Default
Note
cyclic
Boolean
false
optional, restore closed state after cycleDuration seconds for stateless devices with cyclic behaviour
cycleDuration
Integer
false
optional, cycle duration (in seconds) for cyclic mode (default: 5 sec)
reverse
Boolean
false
optional, reverse up/down in case of bad mounting
pedestrianDuration
Integer
0
optional, duration for pedestrian position for RTS gates
HeatingSystem parameters
Type
Default
Note
derogationDuration
Integer
1
optional, duration (in hours) for derogation orders
comfort
Integer
19
optional, comfort temperature used as display for heaters controled by pilot wire
eco
Integer
17
optional, comfort temperature used as display for heaters controled by pilot wire
请发表评论