grzegorz914/homebridge-denon-tv: Homebridge plugin for Denon/Marantz AV Receiver ...

原作者: [db:作者] 来自: 网络收藏邀请

开源软件名称：

grzegorz914/homebridge-denon-tv

开源软件地址：

https://github.com/grzegorz914/homebridge-denon-tv

开源编程语言：

JavaScript 100.0%

开源软件介绍：

Homebridge Denon TV

Homebridge plugin for Denon/Marantz AV Receivers series X/SR. Tested with Denon AVR-X6300H and Marantz SR6013.

This plugin is based upon the official documentation for communicating with and controlling these Denon and Marantz receivers, located here: Denon Control Protocol 2020

Package Requirements

Package	Installation	Role	Required
Homebridge	Homebridge Wiki	HomeKit Bridge	Required
Config UI X	Config UI X Wiki	Web User Interface	Recommended
Denon TV	`npm install -g homebridge-denon-tv`	Plug-In	Required

Note

For homebridge-denon-tv versions 3.6.0 and above the minimum required version of Homebridge is 1.3.x.
If update to 3.15.0 need remove the accessory frome HomeKit app and add it again.

Troubleshooting

If for some reason the device is not displayed in HomeKit app try this procedure:
- Go to ./homebridge/persist.
- Remove AccessoryInfo.xxx file which contain Your device data: {"displayName":"AV Receiver"}.
- Next remove IdentifierCashe.xxx file with same name as AccessoryInfo.xxx.
- Restart Homebridge and try add it to the HomeKit app again.

Features and How To Use Them

Multi Zone control.
Power ON/OFF short press tile in HomeKit app.
RC/Media control is possible after you go to the RC app on iPhone/iPad.
Speaker control is possible after you go to RC app on iPhone/iPad Speaker Service.
Legacy Volume and Mute control is possible throught extra lightbulb/fan (slider).
Inputs can be changed using Inputs selector in HomeKit.app, additionally can create separate tile.
Surrounds can be changed using Surrounds selector in HomeKit.app, additionally can create separate tile.
Digital Input Modes can be controlled by creating separate tile in the buttons section.
Siri can be used for all functions, some times need create legacy buttons/switches/sensors.
Automations can be used for all functions, some times need create legacy buttons/switches/sensors.
MQTT Client publisch all available data from device.

Configuration

Install and use Homebridge Config UI X plugin to configure this plugin (Highly Recommended). The sample configuration can be edited and used manually as an alternative. See the sample-config.json file in this repository for an example or copy the example below into your config.json file, making the apporpriate changes before saving it. Be sure to always make a backup copy of your config.json file before making any changes to it.

Key	Description
`name`	Here set the accessory Name to be displayed in Homebridge/HomeKit.
`host`	Here set the Hsostname or Address IP of TV.
`port`	Here set the API communication port, if `8080` is not working try to use port `80` which some receivers use alternatively.
`zoneControl`	Selects which zone will be controlled by this section (`0` - Main Zone, `1` - Zone 2, `2` - Zone 3, `3` - Surround Mode) or choice from the configurations GUI
`enableDebugMode`	If enabled, deep log will be present in homebridge console.
`disableLogInfo`	If enabled, disable log info, all values and state will not be displayed in Homebridge log console.
`disableLogDeviceInfo`	If enabled, add ability to disable log device info by every connections device to the network.
`masterPower`	If enabled, then the power switch for that zone (typically you would only use this for the Main Zone) will turn the entire receiver `ON` or `OFF/STANDBY` rather than just the zone itself
`masterVolume`	If enabled, then the volume for that zone (typically you would only use this for the Main Zone) will set the entire receiver `UP` or `DOWN` rather than just the zone itself
`masterMute`	If enabled, then the mute switch for that zone (typically you would only use this for the Main Zone) will muted the entire receiver `ON` or `OFF` rather than just the zone itself
`volumeControl`	Here choice what a additional volume control mode You want to use (None, Lightbulb, Fan).
`infoButtonCommand`	Here select the function of `I` button in RC app.
`inputs.name`	Here set Input Name which You want expose to the Homebridge/HomeKit.
`inputs.reference`	Choose from available inputs, the inputs that should be published to and appear in HomeKit app in the device tile as inputs list
`inputs.mode`	Choose from available inputs mode.
`inputs.switch`	If enabled, the tile for that input will be expose to the Homebridge/HomeKit and can be used for HomeKit automation.
`inputs.displayType`	Here select display type in HomeKit app, possible `Button`, `Switch`, `Motion Sensor`, `Occupancy Sensor`.
`buttonsMainZone.name`	Here set Button Name which You want expose to the Homebridge/HomeKit.
`buttonsMainZone.reference`	Here choice function for additional control button for Main Zone.
`buttonsMainZone.displayType`	Here select display type in HomeKit app, possible `Button`, `Switch`.
`buttonsZone2.name`	Here set Button Name which You want expose to the Homebridge/HomeKit.
`buttonsZone2.reference`	Here choice function for additional control button for Zone 2.
`buttonsZone2.displayType`	Here select display type in HomeKit app, possible `Button`, `Switch`.
`buttonsZone3.name`	Here set Button Name which You want expose to the Homebridge/HomeKit.
`buttonsZone3.reference`	Here choice function for additional control button for Zone 3.
`buttonsZone3.displayType`	Here select display type in HomeKit app, possible `Button`, `Switch`.
`surrounds.name`	Here set Surround Mode Name which You want expose to the Homebridge/HomeKit.
`surrounds.reference`	Here choice Surround Mode, the mode that should be published to and appear in HomeKit app in the extra tile as Surrounds List.
`surrounds.switch`	If enabled, the tile for that surround mode will be expose to the Homebridge/HomeKit and can be used for HomeKit automation.
`surrounds.displayType`	Here select display type in HomeKit app, possible `Button`, `Switch`, `Motion Sensor`, `Occupancy Sensor`.
`enableMqtt`	If enabled, MQTT Broker will start automatically and publish all awailable PV installation data.
`mqttHost`	Here set the IP Address or Hostname for MQTT Broker.)
`mqttPort`	Here set the Port for MQTT Broker, default 1883.)
`mqttPrefix`	Here set the Prefix for Topic or leave empty.)
`mqttAuth`	If enabled, MQTT Broker will use authorization credentials.
`mqttUser`	Here set the MQTT Broker user.
`mqttPasswd`	Here set the MQTT Broker password.
`mqttDebug`	If enabled, deep log will be present in homebridge console for MQTT.
`AV Surround Mode`	This extra Accessory will control all functions of Main Zone except (Inputs and Buttons).

{
    "platform": "DenonTv",
    "devices": [
        {
            "name": "AV Main Zone",
            "host": "192.168.1.5",
            "port": 8080,
            "zoneControl" : 0,
            "volumeControl": 0,
            "masterPower": false,
            "masterVolume": false,
            "masterMute": false,
            "infoButtonCommand": "MNINF",
            "disableLogInfo": false,
            "disableLogDeviceInfo": false,
            "enableDebugMode": false,
            "inputs": [
                {
                    "name": "Xbox One",
                    "reference": "GAME",
                    "mode": "SI",
                    "switch": false,
					"displayType": 0
                },
                {
                    "name": "Television",
                    "reference": "TV",
                    "mode": "SI",
                    "switch": false,
					"displayType": 0
                }
            ],
            "buttonsMainZone": [
                {
                    "name": "POWER ON",
                    "reference": "ZMON",
					"displayType": 0
                }
            ],
            "enableMqtt": false,
            "mqttHost": "192.168.1.33",
            "mqttPort": 1883,
            "mqttPrefix": "home/denon",
            "mqttAuth": false,
            "mqttUser": "user",
            "mqttPass": "password",
            "mqttDebug": false
        },
        {
            "name": "AV Zone 1",
            "host": "192.168.1.5",
            "port": 8080,
            "zoneControl" : 1,
            "volumeControl": 0,
            "masterPower": false,
            "masterVolume": false,
            "masterMute": false,
            "infoButtonCommand": "MNINF",
            "disableLogInfo": false,
            "disableLogDeviceInfo": false,
            "enableDebugMode": false,
            "inputs": [
                {
                    "name": "Xbox One",
                    "reference": "GAME",
                    "mode": "SI",
                    "switch": false,
					"displayType": 0
                },
                {
                    "name": "Television",
                    "reference": "TV",
                    "mode": "SI",
                    "switch": false,
					"displayType": 0
                }
            ],
            "buttonsZone2": [
                {
                    "name": "POWER ON",
                    "reference": "Z2ON",
					"displayType": 0
                }
            ],
            "enableMqtt": false,
            "mqttHost": "192.168.1.33",
            "mqttPort": 1883,
            "mqttPrefix": "home/denon",
            "mqttAuth": false,
            "mqttUser": "user",
            "mqttPass": "password",
            "mqttDebug": false
        },
        {
            "name": "AV Zone 2",
            "host": "192.168.1.5",
            "port": 8080,
            "zoneControl" : 2,
            "volumeControl": 0,
            "masterPower": false,
            "masterVolume": false,
            "masterMute": false,
            "infoButtonCommand": "MNINF",
            "disableLogInfo": false,
            "disableLogDeviceInfo": false,
            "enableDebugMode": false,
            "inputs": [
                {
                    "name": "Xbox One",
                    "reference": "GAME",
                    "mode": "SI",
                    "switch": false,
					"displayType": 0
                },
                {
                    "name": "Television",
                    "reference": "TV",
                    "mode": "SI",
                    "switch": false,
					"displayType": 0
                }
            ],
            "buttonsZone3": [
                {
                    "name": "POWER ON",
                    "reference": "Z3ON",
					"displayType": 0
                }
            ],
            "enableMqtt": false,
            "mqttHost": "192.168.1.33",
            "mqttPort": 1883,
            "mqttPrefix": "home/denon",
            "mqttAuth": false,
            "mqttUser": "user",
            "mqttPass": "password",
            "mqttDebug": false
        },
        {
            "name": "AV Surround Mode",
            "host": "192.168.1.5",
            "port": 8080,
            "zoneControl" : 3,
            "volumeControl": 0,
            "masterPower": false,
            "masterVolume": false,
            "masterMute": false,
            "infoButtonCommand": "MNINF",
            "disableLogInfo": false,
            "disableLogDeviceInfo": false,
            "enableDebugMode": false,
            "surrounds": [
                {
                    "name": "MCH Stereo",
                    "reference": "MCH STEREO",
                    "switch": false,
					"displayType": 0
                },
                {
                    "name": "Stereo",
                    "reference": "STEREO",
                    "switch": false,
					"displayType": 0
                }
            ],
            "enableMqtt": false,
            "mqttHost": "192.168.1.33",
            "mqttPort": 1883,
            "mqttPrefix": "home/denon",
            "mqttAuth": false,
            "mqttUser": "user",
            "mqttPass": "password",
            "mqttDebug": false
        }
    ]
}

Adding to HomeKit

Each accessory needs to be manually paired.

Open the Home app on your device.
Tap the .
Tap Add Accessory, and select I Don't Have a Code or Cannot Scan or More Options.
Select Your accessory.
Enter the Homebridge PIN or scan the QR code, this can be found in Homebridge UI or Homebridge logs.
Complete the accessory setup.

Limitations

That maximum Services for 1 accessory is 100. If Services > 100, accessory stop responding.
To solve this problem the plugin counts the number of Services and not allow add more as 100.
If You have configured more as 100 Services some inputs or buttons will not be available in the HomeKit app.
The Services in this accessory are:
- Information.
- Speaker.
- Lightbulb.
- Fan.
- Television.
- Inputs, which may range from 6 to 100 as each input is 1 service.
- Buttons, which may range from 6 to 100 as each button is 1 service.

What's New

Development

Please feel free to create a Pull request and help in development. It will be highly appreciated.

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

jzelinskie/homebrew-duckdns: automatically update duckdns via launchd on OSX发布时间：2022-06-14

ckuburlis/homebridge-tado发布时间：2022-06-14

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18080|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9613|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8147|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8530|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8432|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9343|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8395|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7832|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8385|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7380|2022-11-06

客服电话

电子邮件

grzegorz914/homebridge-denon-tv: Homebridge plugin for Denon/Marantz AV Receiver ...

开源软件名称：

开源软件地址：

开源编程语言：

开源软件介绍：

Homebridge Denon TV

Package Requirements

Note

Troubleshooting

Features and How To Use Them

Configuration

Adding to HomeKit

Limitations

What's New

Development

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

TUNER88/iOSSystemSoundsLibrary: List of

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053