• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号
登陆 注册
描述文字

C++ HS_LOG函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中HS_LOG函数的典型用法代码示例。如果您正苦于以下问题：C++ HS_LOG函数的具体用法？C++ HS_LOG怎么用？C++ HS_LOG使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了HS_LOG函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: usb_headset_detect

static void usb_headset_detect(int type)
{
    int state_h2w = 0;
    int state_usb = 0;

    HS_DBG();

    mutex_lock(&hi->mutex_lock);
    state_h2w = switch_get_state(&hi->sdev_h2w);

    switch (type) {
    case USB_NO_HEADSET:
        hi->usb_headset.type = USB_NO_HEADSET;
        hi->usb_headset.status = STATUS_DISCONNECTED;
        state_h2w &= ~MASK_USB_HEADSET;
        state_usb = GOOGLE_USB_AUDIO_UNPLUG;
        HS_LOG_TIME("Remove USB_HEADSET (state %d, %d)",
                    state_h2w, state_usb);
        break;
    case USB_AUDIO_OUT:
        hi->usb_headset.type = USB_AUDIO_OUT;
        hi->usb_headset.status = STATUS_CONNECTED_ENABLED;
        state_h2w |= BIT_USB_AUDIO_OUT;
        state_usb = GOOGLE_USB_AUDIO_ANLG;
        HS_LOG_TIME("Insert USB_AUDIO_OUT (state %d, %d)",
                    state_h2w, state_usb);
        break;
    default:
        HS_LOG("Unknown headset type");
    }

    switch_set_state(&hi->sdev_h2w, state_h2w);
    switch_set_state(&hi->sdev_usb_audio, state_usb);
    mutex_unlock(&hi->mutex_lock);
}
开发者ID:LeeDroid-，项目名称:Shooter-2.6.35-MR，代码行数:35，代码来源:htc_headset_mgr.c


示例2: headset_ext_detect

void headset_ext_detect(int type)
{
	HS_DBG();

	switch (type) {
	case H2W_NO_HEADSET:
		/* Release Key */
	case H2W_HEADSET:
	case H2W_35MM_HEADSET:
	case H2W_REMOTE_CONTROL:
	case H2W_USB_CRADLE:
	case H2W_UART_DEBUG:
	case H2W_TVOUT:
		break;
	case USB_NO_HEADSET:
		/* Release Key */
	case USB_AUDIO_OUT:
#ifdef CONFIG_SUPPORT_USB_SPEAKER
	case USB_AUDIO_OUT_DGTL:
#endif
		usb_headset_detect(type);
		break;
	default:
		HS_LOG("Unknown headset type");
	}
}
开发者ID:Bigtime1267，项目名称:HTC-C525c，代码行数:26，代码来源:htc_headset_mgr.c


示例3: headset_notifier_update

static void headset_notifier_update(int id)
{
    if (!hi) {
        HS_LOG("HS_MGR driver is not ready");
        return;
    }

    switch (id) {
    case HEADSET_REG_HPIN_GPIO:
        break;
    case HEADSET_REG_REMOTE_ADC:
        update_mic_status(HS_DEF_MIC_DETECT_COUNT);
        break;
    case HEADSET_REG_REMOTE_KEYCODE:
    case HEADSET_REG_RPC_KEY:
        break;
    case HEADSET_REG_MIC_STATUS:
        update_mic_status(HS_DEF_MIC_DETECT_COUNT);
        break;
    case HEADSET_REG_MIC_BIAS:
    case HEADSET_REG_MIC_SELECT:
    case HEADSET_REG_KEY_INT_ENABLE:
    case HEADSET_REG_KEY_ENABLE:
    case HEADSET_REG_INDICATOR_ENABLE:
        break;
    default:
        break;
    }
}
开发者ID:LeeDroid-，项目名称:Shooter-2.6.35-MR，代码行数:29，代码来源:htc_headset_mgr.c


示例4: get_fs

static struct file *openFile(char *path,int flag,int mode)
{
	mm_segment_t old_fs;
	old_fs = get_fs();
	set_fs(KERNEL_DS);
	fp=filp_open(path, flag, mode);
	set_fs(old_fs);
	if(IS_ERR(fp))
	   HS_LOG("File Open Error:%s",path);

	if(!fp->f_op)
	   HS_LOG("File Operation Method Error!!");

	if (fp) return fp;
	else return NULL;
}
开发者ID:Snuzzo，项目名称:dna-kernel，代码行数:16，代码来源:htc_headset_one_wire.c


示例5: hs_notify_key_event

int hs_notify_key_event(int key_code)
{
    struct button_work *work;

    HS_DBG();

    if (hi->hs_35mm_type == HEADSET_UNKNOWN_MIC ||
            hi->hs_35mm_type == HEADSET_NO_MIC ||
            hi->h2w_35mm_type == HEADSET_NO_MIC)
        update_mic_status(HS_DEF_MIC_DETECT_COUNT);
    else if (!hs_hpin_stable()) {
        HS_LOG("The HPIN is unstable, SKIP THE BUTTON EVENT.");
        return 1;
    } else {
        work = kzalloc(sizeof(struct button_work), GFP_KERNEL);
        if (!work) {
            HS_ERR("Failed to allocate button memory");
            return 1;
        }
        work->key_code = key_code;
        INIT_DELAYED_WORK(&work->key_work, button_35mm_work_func);
        queue_delayed_work(button_wq, &work->key_work,
                           HS_JIFFIES_BUTTON);
    }

    return 1;
}
开发者ID:LeeDroid-，项目名称:Shooter-2.6.35-MR，代码行数:27，代码来源:htc_headset_mgr.c


示例6: onewire_init_work_func

static void onewire_init_work_func(struct work_struct *work)
{
    HS_LOG("Open %s", hi->pdata.onewire_tty_dev);
    fp = openFile(hi->pdata.onewire_tty_dev,O_CREAT|O_RDWR|O_NONBLOCK,0666);
    if (fp != NULL) {
        if (!fp->private_data)
            HS_LOG("No private data");
        else {
            HS_LOG("Private data exist");
            closeFile(fp);
            return;
        }
    } else
        HS_LOG("%s, openFile is NULL pointer\n", __func__);
    closeFile(fp);
}
开发者ID:Kirmaniarslan，项目名称:kernel_3.0.16_htc_pico，代码行数:16，代码来源:htc_headset_one_wire.c


示例7: headset_notifier_register

int headset_notifier_register(struct headset_notifier *notifier)
{
    if (!notifier->func) {
        HS_LOG("NULL register function");
        return 0;
    }

    switch (notifier->id) {
    case HEADSET_REG_HPIN_GPIO:
        HS_LOG("Register HPIN_GPIO notifier");
        hs_mgr_notifier.hpin_gpio = notifier->func;
        break;
    case HEADSET_REG_REMOTE_ADC:
        HS_LOG("Register REMOTE_ADC notifier");
        hs_mgr_notifier.remote_adc = notifier->func;
        break;
    case HEADSET_REG_RPC_KEY:
        HS_LOG("Register RPC_KEY notifier");
        hs_mgr_notifier.rpc_key = notifier->func;
        break;
    case HEADSET_REG_MIC_STATUS:
        HS_LOG("Register MIC_STATUS notifier");
        hs_mgr_notifier.mic_status = notifier->func;
        break;
    case HEADSET_REG_MIC_BIAS:
        HS_LOG("Register MIC_BIAS notifier");
        hs_mgr_notifier.mic_bias_enable = notifier->func;
        break;
    case HEADSET_REG_MIC_SELECT:
        HS_LOG("Register MIC_SELECT notifier");
        hs_mgr_notifier.mic_select = notifier->func;
        break;
    case HEADSET_REG_KEY_INT_ENABLE:
        HS_LOG("Register KEY_INT_ENABLE notifier");
        hs_mgr_notifier.key_int_enable = notifier->func;
        break;
    case HEADSET_REG_KEY_ENABLE:
        HS_LOG("Register KEY_ENABLE notifier");
        hs_mgr_notifier.key_enable = notifier->func;
        break;
    default:
        HS_LOG("Unknown register ID");
        return 0;
    }

    return 1;
}
开发者ID:RuNuH，项目名称:eViL-sense-3x，代码行数:47，代码来源:htc_headset_mgr.c


示例8: hs_1wire_deinit

static void hs_1wire_deinit(void)
{
	char all_zero = 0xaa;
	if (fp) {
		if (hi->pdata.tx_level_shift_en)
			gpio_set_value_cansleep(hi->pdata.tx_level_shift_en, 0);
		hr_msleep(20);
		writeFile(fp, &all_zero, 1); 
		HS_LOG("Write 0xaa to unblock");
		hr_msleep(10);
		HS_LOG("close file");
		closeFile(fp);
		fp = NULL;
		if (hi->pdata.tx_level_shift_en)
			gpio_set_value_cansleep(hi->pdata.tx_level_shift_en, 1);
	}
}
开发者ID:InvisiSource，项目名称:Haunted，代码行数:17，代码来源:htc_headset_one_wire.c


示例9: headset_button_event

void headset_button_event(int is_press, int type)
{
	HS_DBG();

	if (!hs_hpin_stable()) {
		HS_LOG("The HPIN is unstable, SKIP THE BUTTON EVENT.");
		return;
	}
	if (!get_mic_state()) {
		HS_LOG("IGNORE key %d (Not support MIC)", type);
		return;
	}
	if (!is_press)
		button_released(type);
	else if (!atomic_read(&hi->btn_state))
		button_pressed(type);
}
开发者ID:freak007，项目名称:hox-kernel，代码行数:17，代码来源:htc_headset_mgr.c


示例10: irq_init_work_func

static void irq_init_work_func(struct work_struct *work)
{
	HS_DBG();

	if (hi->pdata.hpin_gpio) {
		HS_LOG("Enable detect IRQ");
		set_irq_type(hi->hpin_irq, IRQF_TRIGGER_LOW);
		enable_irq(hi->hpin_irq);
	}

	if (hi->pdata.key_gpio) {
		HS_LOG("Enable button IRQ");
		hi->key_irq_type = IRQF_TRIGGER_LOW;
		set_irq_type(hi->key_irq, hi->key_irq_type);
		enable_irq(hi->key_irq);
	}
}
开发者ID:anticline，项目名称:android_kernel_htc_msm8939，代码行数:17，代码来源:htc_headset_gpio.c


示例11: headset_1wire_parse_dt

static int headset_1wire_parse_dt(struct htc_hs_1wire_data *wire)
{
    int i,ret = 0;
    const char *ttyname;
    u32 remoteadc[6] = {0};
    struct device_node *dt = wire->dev->of_node;
    HS_LOG("%s", __func__);

    wire->pdata->tx_level_shift_en = of_get_named_gpio(dt, "hs_1wire,tx_level_shift_en", 0);
    if (gpio_is_valid(wire->pdata->tx_level_shift_en)) {
        HS_LOG("tx_lv_en:%d", wire->pdata->tx_level_shift_en);
    } else
        HS_LOG("tx_lv_en parser err");

    ret = of_property_read_u32_array(dt, "hs_1wire,one_wire_remote", remoteadc, 6);
    if (ret < 0) {
        HS_LOG("remote parser failure");
    } else {
        for (i = 0; i < ARRAY_SIZE(remoteadc); i++) {
            wire->pdata->one_wire_remote[i] = (char)remoteadc[i];
        }
        HS_LOG("remote: %#x %#x %#x", remoteadc[0], remoteadc[1],
               remoteadc[2]);
    }

    ret = of_property_read_string(dt, "hs_1wire,onewire_tty_dev", &ttyname);
    if (ret < 0) {
        HS_LOG("tty_dev string parser failue");
    } else {
        snprintf(wire->pdata->onewire_tty_dev, 15, "/dev/%s", ttyname);
        HS_LOG("tty=%s", wire->pdata->onewire_tty_dev);
    }

    return 0;
}
开发者ID:qtekfun，项目名称:kernel_htc_msm8939，代码行数:35，代码来源:htc_headset_one_wire.c


示例12: hs_read_aid

static int hs_read_aid(void)
{
	char in_buf[10];
	int read_count, i;
		read_count = readFile(fp, in_buf, 10);
		HS_LOG("[1wire]read_count = %d", read_count);
		if (read_count > 0) {
			for (i = 0; i < read_count; i++) {
				HS_LOG("[1wire]in_buf[%d] = 0x%x", i, in_buf[i]);
				if ((in_buf[i] & 0xF0) == 0x80 && in_buf[i] > 0x80) {
					hi->aid = in_buf[i];
					return 0;
				}
			}
		}
	return -1;

}
开发者ID:InvisiSource，项目名称:Haunted，代码行数:18，代码来源:htc_headset_one_wire.c


示例13: hs_gpio_request_irq

static int hs_gpio_request_irq(unsigned int gpio, unsigned int *irq,
			       irq_handler_t handler, unsigned long flags,
			       const char *name, unsigned int wake)
{
	int ret = 0;

	HS_DBG();

	ret = gpio_request(gpio, name);
	if (ret < 0)
		return ret;

	ret = gpio_direction_input(gpio);
	if (ret < 0) {
		gpio_free(gpio);
		return ret;
	}

	if (!(*irq)) {
		ret = gpio_to_irq(gpio);
		if (ret < 0) {
			gpio_free(gpio);
			return ret;
		}
		HS_LOG("gpio_to_irq ret = %d", ret);
		*irq = (unsigned int) ret;
	}

	HS_LOG("[HS] irq=%d", *irq);
	ret = request_irq(*irq, handler, flags, name, NULL);
	if (ret < 0) {
		gpio_free(gpio);
		return ret;
	}

	ret = set_irq_wake(*irq, wake);
	if (ret < 0) {
		free_irq(*irq, 0);
		gpio_free(gpio);
		return ret;
	}

	return 1;
}
开发者ID:anticline，项目名称:android_kernel_htc_msm8939，代码行数:44，代码来源:htc_headset_gpio.c


示例14: hs_gpio_uart_set

static void hs_gpio_uart_set(int value)
{
	value = !!value;

	if (value != headset_uart_enable) {
		headset_uart_enable = value;
		HS_LOG("%s headset uart", value? "enable": "disable");
		gpio_set_value(hi->pdata.uart_gpio, value);
	}
}
开发者ID:anticline，项目名称:android_kernel_htc_msm8939，代码行数:10，代码来源:htc_headset_gpio.c


示例15: mutex_lock

static struct file *openFile(char *path,int flag,int mode)
{
	mm_segment_t old_fs;
	mutex_lock(&hi->mutex_lock);
	old_fs = get_fs();
	set_fs(KERNEL_DS);
	HS_LOG("Open: fp count = %d", ++fp_count);
	fp=filp_open(path, flag, mode);
	set_fs(old_fs);
	if (!fp)
		return NULL;
	if(IS_ERR(fp))
	   HS_LOG("File Open Error:%s",path);

	if(!fp->f_op)
	   HS_LOG("File Operation Method Error!!");

	return fp;
}
开发者ID:anoane，项目名称:Evita_UL_422-JB，代码行数:19，代码来源:htc_headset_one_wire.c


示例16: hs_1wire_report_type

static int hs_1wire_report_type(char **string)
{
	const int type_num = 3; /*How many 1-wire accessories supported*/
	char *hs_type[] = {
		"headset_beats_20",
		"headset_mic_midtier",
		"headset_beats_solo_20",
	};
	hi->aid &= 0x7f;
	HS_LOG("[1wire]AID = 0x%x", hi->aid);
	if (hi->aid > type_num || hi->aid < 1) {
		*string = "1wire_unknown";
		return 14;
	}else {
		*string = hs_type[hi->aid - 1];
		HS_LOG("Report %s type, size %d", *string, sizeof(hs_type[hi->aid -1]));
		return sizeof(hs_type[hi->aid -1]);
	}
}
开发者ID:Bigtime1267，项目名称:HTC-C525c，代码行数:19，代码来源:htc_headset_one_wire.c


示例17: closeFile

int closeFile(struct file *fp)
{
	mm_segment_t old_fs;
	old_fs = get_fs();
	set_fs(KERNEL_DS);
	HS_LOG("Close: fp count = %d", --fp_count);
	filp_close(fp,NULL);
	set_fs(old_fs);
	return 0;
}
开发者ID:Bigtime1267，项目名称:HTC-C525c，代码行数:10，代码来源:htc_headset_one_wire.c


示例18: hs_8x60_remote_adc

static int hs_8x60_remote_adc(int *adc)
{
	int ret = 0;

	HS_DBG();

	ret = pm8058_htc_config_mpp_and_adc_read(adc, 1, CHANNEL_ADC_HDSET,
						 hi->pdata.adc_mpp,
						 hi->pdata.adc_amux);
	if (ret) {
		*adc = -1;
		HS_LOG("Failed to read remote ADC");
		return 0;
	}

	HS_LOG("Remote ADC %d (0x%X)", *adc, *adc);

	return 1;
}
开发者ID:LeeDroid-，项目名称:Shooter-2.6.35-MR，代码行数:19，代码来源:htc_headset_8x60.c


示例19: hs_1wire_report_type

static int hs_1wire_report_type(char **string)
{
    const int type_num = 3;
    char *hs_type[] = {
        "headset_mic_1wire",
        "headset_mic_midtier",
        "headset_mic_oneseg",
    };
    hi->aid &= 0x7f;
    HS_LOG("[1wire]AID = 0x%x", hi->aid);
    if (hi->aid > type_num || hi->aid < 1) {
        *string = "1wire_unknown";
        return 14;
    } else {
        *string = hs_type[hi->aid - 1];
        HS_LOG("Report %s type, size %d", *string, sizeof(hs_type[hi->aid -1]));
        return sizeof(hs_type[hi->aid -1]);
    }
}
开发者ID:qtekfun，项目名称:kernel_htc_msm8939，代码行数:19，代码来源:htc_headset_one_wire.c


示例20: button_1wire_work_func

/*One-wire button event handler*/
int button_1wire_work_func()
{
	int cnt = 0;
	char a_buf[20];
	int count = 0;
	int r,bflag;
	int key = 99;

	while(1){
		bflag=0;
		r=readFile(fp,a_buf,10);

		if(r>0){
			HS_LOG("Read %d bytes, count:%d, %s",r,count,a_buf);
			for(cnt = 0; cnt < r; cnt++){
				HS_LOG("0x%x \n", (int) a_buf[cnt]);
				if ((int)a_buf[cnt]==123){
					key = 3;
					bflag=1;
				}
				if ((int)a_buf[cnt]==125){
					key = 1;
					bflag=1;
				}
				if ((int)a_buf[cnt]==126){
					key = 2;
					bflag=1;
				}
				if ((int)a_buf[cnt]==127){
					key = 0;
					bflag=1;
			}
		}
		}
		count++;

		if(bflag == 1 || count == CHECK_COUNT)
			break;

		msleep(1);
	}
	return key;
}
开发者ID:freak007，项目名称:hox-kernel，代码行数:44，代码来源:htc_headset_mgr.c



注：本文中的HS_LOG函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ HTList_nextObject函数代码示例发布时间：2022-05-31
下一篇：
C++ HR函数代码示例发布时间：2022-05-31
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap