本文整理汇总了C++中rt_put_prio函数的典型用法代码示例。如果您正苦于以下问题:C++ rt_put_prio函数的具体用法?C++ rt_put_prio怎么用?C++ rt_put_prio使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了rt_put_prio函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: rt_mut_delete
OS_RESULT rt_mut_delete (OS_ID mutex) {
/* Delete a mutex object */
P_MUCB p_MCB = mutex;
P_TCB p_TCB;
__DMB();
/* Restore owner task's priority. */
if (p_MCB->level != 0) {
p_MCB->owner->prio = p_MCB->prio;
if (p_MCB->owner != os_tsk.run) {
rt_resort_prio (p_MCB->owner);
}
}
while (p_MCB->p_lnk != NULL) {
/* A task is waiting for mutex. */
p_TCB = rt_get_first ((P_XCB)p_MCB);
rt_ret_val(p_TCB, 0/*osOK*/);
rt_rmv_dly(p_TCB);
p_TCB->state = READY;
rt_put_prio (&os_rdy, p_TCB);
}
if (os_rdy.p_lnk && (os_rdy.p_lnk->prio > os_tsk.run->prio)) {
/* preempt running task */
rt_put_prio (&os_rdy, os_tsk.run);
os_tsk.run->state = READY;
rt_dispatch (NULL);
}
p_MCB->cb_type = 0;
return (OS_R_OK);
}
开发者ID:antonio-salieri,项目名称:mbed,代码行数:34,代码来源:rt_Mutex.c
示例2: rt_sem_delete
OS_RESULT rt_sem_delete (OS_ID semaphore) {
/* Delete semaphore */
P_SCB p_SCB = semaphore;
P_TCB p_TCB;
while (p_SCB->p_lnk != NULL) {
/* A task is waiting for token */
p_TCB = rt_get_first ((P_XCB)p_SCB);
rt_ret_val(p_TCB, 0);
rt_rmv_dly(p_TCB);
p_TCB->state = READY;
rt_put_prio (&os_rdy, p_TCB);
}
if (os_rdy.p_lnk && (os_rdy.p_lnk->prio > os_tsk.run->prio)) {
/* preempt running task */
rt_put_prio (&os_rdy, os_tsk.run);
os_tsk.run->state = READY;
rt_dispatch (NULL);
}
p_SCB->cb_type = 0;
return (OS_R_OK);
}
开发者ID:1deus,项目名称:tmk_keyboard,代码行数:25,代码来源:rt_Semaphore.c
示例3: rt_mut_release
OS_RESULT rt_mut_release (OS_ID mutex) {
/* Release a mutex object */
P_MUCB p_MCB = mutex;
P_TCB p_TCB;
if (p_MCB->level == 0 || p_MCB->owner != os_tsk.run) {
/* Unbalanced mutex release or task is not the owner */
return (OS_R_NOK);
}
__DMB();
if (--p_MCB->level != 0) {
return (OS_R_OK);
}
/* Restore owner task's priority. */
os_tsk.run->prio = p_MCB->prio;
if (p_MCB->p_lnk != NULL) {
/* A task is waiting for mutex. */
p_TCB = rt_get_first ((P_XCB)p_MCB);
#ifdef __CMSIS_RTOS
rt_ret_val(p_TCB, 0/*osOK*/);
#else
rt_ret_val(p_TCB, OS_R_MUT);
#endif
rt_rmv_dly (p_TCB);
/* A waiting task becomes the owner of this mutex. */
p_MCB->level = 1;
p_MCB->owner = p_TCB;
p_MCB->prio = p_TCB->prio;
/* Priority inversion, check which task continues. */
if (os_tsk.run->prio >= rt_rdy_prio()) {
rt_dispatch (p_TCB);
}
else {
/* Ready task has higher priority than running task. */
rt_put_prio (&os_rdy, os_tsk.run);
rt_put_prio (&os_rdy, p_TCB);
os_tsk.run->state = READY;
p_TCB->state = READY;
rt_dispatch (NULL);
}
}
else {
/* Check if own priority raised by priority inversion. */
if (rt_rdy_prio() > os_tsk.run->prio) {
rt_put_prio (&os_rdy, os_tsk.run);
os_tsk.run->state = READY;
rt_dispatch (NULL);
}
}
return (OS_R_OK);
}
开发者ID:antonio-salieri,项目名称:mbed,代码行数:51,代码来源:rt_Mutex.c
示例4: rt_tsk_prio
OS_RESULT rt_tsk_prio (OS_TID task_id, U8 new_prio) {
/* Change execution priority of a task to "new_prio". */
P_TCB p_task;
if (task_id == 0) {
/* Change execution priority of calling task. */
os_tsk.run->prio = new_prio;
run:if (rt_rdy_prio() > new_prio) {
rt_put_prio (&os_rdy, os_tsk.run);
os_tsk.run->state = READY;
rt_dispatch (NULL);
}
return (OS_R_OK);
}
/* Find the task in the "os_active_TCB" array. */
if (task_id > os_maxtaskrun || os_active_TCB[task_id-1] == NULL) {
/* Task with "task_id" not found or not started. */
return (OS_R_NOK);
}
p_task = os_active_TCB[task_id-1];
p_task->prio = new_prio;
if (p_task == os_tsk.run) {
goto run;
}
rt_resort_prio (p_task);
if (p_task->state == READY) {
/* Task enqueued in a ready list. */
p_task = rt_get_first (&os_rdy);
rt_dispatch (p_task);
}
return (OS_R_OK);
}
开发者ID:1deus,项目名称:tmk_keyboard,代码行数:33,代码来源:rt_Task.c
示例5: rt_evt_psh
void rt_evt_psh (P_TCB p_CB, U16 set_flags) {
/* Check if task has to be waken up */
U16 event_flags;
p_CB->events |= set_flags;
event_flags = p_CB->waits;
if (p_CB->state == WAIT_AND) {
/* Check for AND-connected events */
if ((p_CB->events & event_flags) == event_flags) {
goto rdy;
}
}
if (p_CB->state == WAIT_OR) {
/* Check for OR-connected events */
if (p_CB->events & event_flags) {
p_CB->waits &= p_CB->events;
rdy: p_CB->events &= ~event_flags;
rt_rmv_dly (p_CB);
p_CB->state = READY;
#ifdef __CMSIS_RTOS
rt_ret_val2(p_CB, 0x08/*osEventSignal*/, p_CB->waits);
#else
rt_ret_val (p_CB, OS_R_EVT);
#endif
rt_put_prio (&os_rdy, p_CB);
}
}
}
开发者ID:Azizou,项目名称:ECSE426-Project-Theremin,代码行数:28,代码来源:rt_Event.c
示例6: rt_mut_wait
OS_RESULT rt_mut_wait (OS_ID mutex, U16 timeout) {
/* Wait for a mutex, continue when mutex is free. */
P_MUCB p_MCB = mutex;
if (p_MCB->level == 0) {
p_MCB->owner = os_tsk.run;
p_MCB->prio = os_tsk.run->prio;
goto inc;
}
if (p_MCB->owner == os_tsk.run) {
/* OK, running task is the owner of this mutex. */
inc:p_MCB->level++;
return (OS_R_OK);
}
/* Mutex owned by another task, wait until released. */
if (timeout == 0) {
return (OS_R_TMO);
}
/* Raise the owner task priority if lower than current priority. */
/* This priority inversion is called priority inheritance. */
if (p_MCB->prio < os_tsk.run->prio) {
p_MCB->owner->prio = os_tsk.run->prio;
rt_resort_prio (p_MCB->owner);
}
if (p_MCB->p_lnk != NULL) {
rt_put_prio ((P_XCB)p_MCB, os_tsk.run);
}
else {
p_MCB->p_lnk = os_tsk.run;
os_tsk.run->p_lnk = NULL;
os_tsk.run->p_rlnk = (P_TCB)p_MCB;
}
rt_block(timeout, WAIT_MUT);
return (OS_R_TMO);
}
开发者ID:thaidao,项目名称:Workspace_Ex,代码行数:35,代码来源:rt_Mutex.c
示例7: rt_dec_dly
void rt_dec_dly (void) {
/* Decrement delta time of list head: remove tasks having a value of zero.*/
P_TCB p_rdy;
if (os_dly.p_dlnk == NULL) {
return;
}
os_dly.delta_time--;
while ((os_dly.delta_time == 0) && (os_dly.p_dlnk != NULL)) {
p_rdy = os_dly.p_dlnk;
if (p_rdy->p_rlnk != NULL) {
/* Task is really enqueued, remove task from semaphore/mailbox */
/* timeout waiting list. */
p_rdy->p_rlnk->p_lnk = p_rdy->p_lnk;
if (p_rdy->p_lnk != NULL) {
p_rdy->p_lnk->p_rlnk = p_rdy->p_rlnk;
p_rdy->p_lnk = NULL;
}
p_rdy->p_rlnk = NULL;
}
rt_put_prio (&os_rdy, p_rdy);
os_dly.delta_time = p_rdy->delta_time;
if (p_rdy->state == WAIT_ITV) {
/* Calculate the next time for interval wait. */
p_rdy->delta_time = p_rdy->interval_time + (U16)os_time;
}
p_rdy->state = READY;
os_dly.p_dlnk = p_rdy->p_dlnk;
if (p_rdy->p_dlnk != NULL) {
p_rdy->p_dlnk->p_blnk = (P_TCB)&os_dly;
p_rdy->p_dlnk = NULL;
}
p_rdy->p_blnk = NULL;
}
}
开发者ID:lyncxy119,项目名称:Sentry,代码行数:35,代码来源:rt_List.c
示例8: rt_mbx_wait
OS_RESULT rt_mbx_wait (OS_ID mailbox, void **message, U16 timeout) {
/* Receive a message; possibly wait for it */
P_MCB p_MCB = mailbox;
P_TCB p_TCB;
/* If a message is available in the fifo buffer */
/* remove it from the fifo buffer and return. */
if (p_MCB->count) {
*message = p_MCB->msg[p_MCB->last];
if (++p_MCB->last == p_MCB->size) {
p_MCB->last = 0;
}
if (p_MCB->state == 2) {
/* A task is waiting to send message */
p_TCB = rt_get_first ((P_XCB)p_MCB);
if (p_MCB->p_lnk == NULL) {
p_MCB->state = 0;
}
#ifdef __CMSIS_RTOS
rt_ret_val(p_TCB, 0/*osOK*/);
#else
rt_ret_val(p_TCB, OS_R_OK);
#endif
p_MCB->msg[p_MCB->first] = p_TCB->msg;
if (++p_MCB->first == p_MCB->size) {
p_MCB->first = 0;
}
rt_rmv_dly (p_TCB);
rt_dispatch (p_TCB);
}
else {
rt_dec (&p_MCB->count);
}
return (OS_R_OK);
}
/* No message available: wait for one */
if (timeout == 0) {
return (OS_R_TMO);
}
if (p_MCB->p_lnk != NULL) {
rt_put_prio ((P_XCB)p_MCB, os_tsk.run);
}
else {
p_MCB->p_lnk = os_tsk.run;
os_tsk.run->p_lnk = NULL;
os_tsk.run->p_rlnk = (P_TCB)p_MCB;
/* Task is waiting to receive a message */
p_MCB->state = 1;
}
rt_block(timeout, WAIT_MBX);
#ifndef __CMSIS_RTOS
os_tsk.run->msg = message;
#endif
return (OS_R_TMO);
}
开发者ID:Dirk7589,项目名称:ECSE426FinalProject,代码行数:55,代码来源:rt_Mailbox.c
示例9: rt_tsk_pass
void rt_tsk_pass (void) {
/* Allow tasks of same priority level to run cooperatively.*/
P_TCB p_new;
p_new = rt_get_same_rdy_prio();
if (p_new != NULL) {
rt_put_prio ((P_XCB)&os_rdy, os_tsk.run);
os_tsk.run->state = READY;
rt_switch_req (p_new);
}
}
开发者ID:1deus,项目名称:tmk_keyboard,代码行数:11,代码来源:rt_Task.c
示例10: rt_mbx_send
OS_RESULT rt_mbx_send (OS_ID mailbox, void *p_msg, U16 timeout) {
/* Send message to a mailbox */
P_MCB p_MCB = mailbox;
P_TCB p_TCB;
if (p_MCB->state == 1) {
/* A task is waiting for message */
p_TCB = rt_get_first ((P_XCB)p_MCB);
if (p_MCB->p_lnk == NULL) {
p_MCB->state = 0;
}
#ifdef __CMSIS_RTOS
rt_ret_val2(p_TCB, 0x10/*osEventMessage*/, (U32)p_msg);
#else
*p_TCB->msg = p_msg;
rt_ret_val (p_TCB, OS_R_MBX);
#endif
rt_rmv_dly (p_TCB);
rt_dispatch (p_TCB);
}
else {
/* Store message in mailbox queue */
if (p_MCB->count == p_MCB->size) {
/* No free message entry, wait for one. If message queue is full, */
/* then no task is waiting for message. The 'p_MCB->p_lnk' list */
/* pointer can now be reused for send message waits task list. */
if (timeout == 0) {
return (OS_R_TMO);
}
if (p_MCB->p_lnk != NULL) {
rt_put_prio ((P_XCB)p_MCB, os_tsk.run);
}
else {
p_MCB->p_lnk = os_tsk.run;
os_tsk.run->p_lnk = NULL;
os_tsk.run->p_rlnk = (P_TCB)p_MCB;
/* Task is waiting to send a message */
p_MCB->state = 2;
}
os_tsk.run->msg = p_msg;
rt_block (timeout, WAIT_MBX);
return (OS_R_TMO);
}
/* Yes, there is a free entry in a mailbox. */
p_MCB->msg[p_MCB->first] = p_msg;
rt_inc (&p_MCB->count);
if (++p_MCB->first == p_MCB->size) {
p_MCB->first = 0;
}
}
return (OS_R_OK);
}
开发者ID:Dirk7589,项目名称:ECSE426FinalProject,代码行数:52,代码来源:rt_Mailbox.c
示例11: rt_chk_robin
__weak void rt_chk_robin (void) {
/* Check if Round Robin timeout expired and switch to the next ready task.*/
P_TCB p_new;
if (os_robin.task != os_rdy.p_lnk) {
/* New task was suspended, reset Round Robin timeout. */
os_robin.task = os_rdy.p_lnk;
os_robin.time = (U16)os_time + os_robin.tout - 1;
}
if (os_robin.time == (U16)os_time) {
/* Round Robin timeout has expired, swap Robin tasks. */
os_robin.task = NULL;
p_new = rt_get_first (&os_rdy);
rt_put_prio ((P_XCB)&os_rdy, p_new);
}
}
开发者ID:antonio-salieri,项目名称:mbed,代码行数:16,代码来源:rt_Robin.c
示例12: rt_mbx_send
OS_RESULT rt_mbx_send (OS_ID mailbox, void *p_msg, U16 timeout) {
/* Send message to a mailbox */
P_MCB p_MCB = mailbox;
P_TCB p_TCB;
if (p_MCB->p_lnk != NULL && p_MCB->count == 0) {
/* A task is waiting for message */
p_TCB = rt_get_first ((P_XCB)p_MCB);
*p_TCB->msg = p_msg;
p_TCB->ret_val = OS_R_MBX;
rt_rmv_dly (p_TCB);
rt_dispatch (p_TCB);
os_tsk.run->ret_val = OS_R_OK;
}
else {
/* Store message in mailbox queue */
if (p_MCB->count == p_MCB->size) {
/* No free message entry, wait for one. If message queue is full, */
/* then no task is waiting for message. The 'p_MCB->p_lnk' list */
/* pointer can now be reused for send message waits task list. */
if (timeout == 0) {
return (OS_R_TMO);
}
if (p_MCB->p_lnk != NULL) {
rt_put_prio ((P_XCB)p_MCB, os_tsk.run);
}
else {
p_MCB->p_lnk = os_tsk.run;
os_tsk.run->p_lnk = NULL;
os_tsk.run->p_rlnk = (P_TCB)p_MCB;
/* Signal the 'isr_mbx_receive ()' that the task is waiting */
/* to send a message */
p_MCB->isr_st = 1;
}
os_tsk.run->msg = p_msg;
rt_block (timeout, WAIT_MBX);
return (OS_R_TMO);
}
/* Yes, there is a free entry in a mailbox. */
p_MCB->msg[p_MCB->first] = p_msg;
rt_inc (&p_MCB->count);
if (++p_MCB->first == p_MCB->size) {
p_MCB->first = 0;
}
}
return (OS_R_OK);
}
开发者ID:thaidao,项目名称:Workspace_Ex,代码行数:47,代码来源:rt_Mailbox.c
示例13: rt_alloc_box
void *rt_mem_alloc (void *box_mem)
{
void *ptr;
//printf("Entered malloc\n");
ptr = rt_alloc_box(box_mem);
if(ptr != NULL)
return ptr;
else {
// add task to waiting list.
rt_put_prio(&wait_list, os_tsk.run);
rt_block (0xffff, (U8)os_tsk.run);
return NULL;
}
/*
void *ptr;
ptr = rt_alloc_box(box_mem);
printf("wait_count: %d\n", wait_count);
if (ptr != NULL)
{
if (wait_count > 0)
{
if (os_tsk.run->prio <= highest_prio)
{
highest_prio = os_tsk.run->prio;
printf("highest_prio: %d\n", highest_prio);
return ptr;
}
}
else if (wait_count == 0) //Empty list, with mem available, just add task
{
return ptr;
}
}
else
{
rt_put_prio(&wait_list, os_tsk.run);
//increment counter when a task is added to wait list
wait_count++;
printf("wait_count, if mem no available: %d\n", wait_count);
rt_block (0xffff, (U8)os_tsk.run);
}
*/
}
开发者ID:raunaqsawhney,项目名称:operating-systems,代码行数:46,代码来源:rt_User.c
示例14: rt_mbx_psh
void rt_mbx_psh (P_MCB p_CB, void *p_msg) {
/* Store the message to the mailbox queue or pass it to task directly. */
P_TCB p_TCB;
/* Check if this was an 'isr_mbx_receive ()' post service request. */
if (p_CB->p_lnk != NULL && p_CB->isr_st == 2) {
/* A task is waiting to send message, remove it from the waiting list. */
p_CB->isr_st = 0;
p_TCB = rt_get_first ((P_XCB)p_CB);
p_TCB->ret_val = OS_R_OK;
/* Store the message to the mailbox queue. */
p_CB->msg[p_CB->first] = p_TCB->msg;
rt_inc (&p_CB->count);
if (++p_CB->first == p_CB->size) {
p_CB->first = 0;
}
goto rdy;
}
/* A task is waiting for message, pass the message to task directly. */
if (p_CB->p_lnk != NULL && p_CB->count == 0) {
p_TCB = rt_get_first ((P_XCB)p_CB);
*p_TCB->msg = p_msg;
p_TCB->ret_val = OS_R_MBX;
rdy:p_TCB->state = READY;
rt_rmv_dly (p_TCB);
rt_put_prio (&os_rdy, p_TCB);
}
else {
/* No task is waiting for message, store the message to the mailbox queue.*/
if (p_CB->count < p_CB->size) {
p_CB->msg[p_CB->first] = p_msg;
rt_inc (&p_CB->count);
if (++p_CB->first == p_CB->size) {
p_CB->first = 0;
}
}
else {
os_error (OS_ERR_MBX_OVF);
}
}
}
开发者ID:thaidao,项目名称:Workspace_Ex,代码行数:41,代码来源:rt_Mailbox.c
示例15: rt_resort_prio
void rt_resort_prio (P_TCB p_task) {
/* Re-sort ordered lists after the priority of 'p_task' has changed. */
P_TCB p_CB;
if (p_task->p_rlnk == NULL) {
if (p_task->state == READY) {
/* Task is chained into READY list. */
p_CB = (P_TCB)&os_rdy;
goto res;
}
}
else {
p_CB = p_task->p_rlnk;
while (p_CB->cb_type == TCB) {
/* Find a header of this task chain list. */
p_CB = p_CB->p_rlnk;
}
res:rt_rmv_list (p_task);
rt_put_prio ((P_XCB)p_CB, p_task);
}
}
开发者ID:lyncxy119,项目名称:Sentry,代码行数:21,代码来源:rt_List.c
示例16: rt_sem_psh
void rt_sem_psh (P_SCB p_CB) {
/* Check if task has to be waken up */
P_TCB p_TCB;
if (p_CB->p_lnk != NULL) {
/* A task is waiting for token */
p_TCB = rt_get_first ((P_XCB)p_CB);
rt_rmv_dly (p_TCB);
p_TCB->state = READY;
#ifdef __CMSIS_RTOS
rt_ret_val(p_TCB, 1);
#else
rt_ret_val(p_TCB, OS_R_SEM);
#endif
rt_put_prio (&os_rdy, p_TCB);
}
else {
/* Store token */
p_CB->tokens++;
}
}
开发者ID:1deus,项目名称:tmk_keyboard,代码行数:21,代码来源:rt_Semaphore.c
示例17: rt_dispatch
void rt_dispatch (P_TCB next_TCB) {
/* Dispatch next task if any identified or dispatch highest ready task */
/* "next_TCB" identifies a task to run or has value NULL (=no next task) */
if (next_TCB == NULL) {
/* Running task was blocked: continue with highest ready task */
next_TCB = rt_get_first (&os_rdy);
rt_switch_req (next_TCB);
}
else {
/* Check which task continues */
if (next_TCB->prio > os_tsk.run->prio) {
/* preempt running task */
rt_put_rdy_first (os_tsk.run);
os_tsk.run->state = READY;
rt_switch_req (next_TCB);
}
else {
/* put next task into ready list, no task switch takes place */
next_TCB->state = READY;
rt_put_prio (&os_rdy, next_TCB);
}
}
}
开发者ID:1deus,项目名称:tmk_keyboard,代码行数:23,代码来源:rt_Task.c
示例18: rt_sem_wait
OS_RESULT rt_sem_wait (OS_ID semaphore, U16 timeout) {
/* Obtain a token; possibly wait for it */
P_SCB p_SCB = semaphore;
if (p_SCB->tokens) {
p_SCB->tokens--;
return (OS_R_OK);
}
/* No token available: wait for one */
if (timeout == 0) {
return (OS_R_TMO);
}
if (p_SCB->p_lnk != NULL) {
rt_put_prio ((P_XCB)p_SCB, os_tsk.run);
}
else {
p_SCB->p_lnk = os_tsk.run;
os_tsk.run->p_lnk = NULL;
os_tsk.run->p_rlnk = (P_TCB)p_SCB;
}
rt_block(timeout, WAIT_SEM);
return (OS_R_TMO);
}
开发者ID:1deus,项目名称:tmk_keyboard,代码行数:23,代码来源:rt_Semaphore.c
示例19: rt_evt_psh
void rt_evt_psh (P_TCB p_CB, U16 set_flags) {
/* Check if task has to be waken up */
U16 event_flags;
p_CB->events |= set_flags;
event_flags = p_CB->waits;
if (p_CB->state == WAIT_AND) {
/* Check for AND-connected events */
if ((p_CB->events & event_flags) == event_flags) {
goto rdy;
}
}
if (p_CB->state == WAIT_OR) {
/* Check for OR-connected events */
if (p_CB->events & event_flags) {
p_CB->waits &= p_CB->events;
rdy: p_CB->events &= ~event_flags;
rt_rmv_dly (p_CB);
p_CB->state = READY;
p_CB->ret_val = OS_R_EVT;
rt_put_prio (&os_rdy, p_CB);
}
}
}
开发者ID:ianleung,项目名称:Operating-Systems,代码行数:24,代码来源:rt_Event.c
示例20: rt_mut_delete
OS_RESULT rt_mut_delete (OS_ID mutex) {
/* Delete a mutex object */
P_MUCB p_MCB = mutex;
P_TCB p_TCB;
P_MUCB p_mlnk;
U8 prio;
if (p_MCB->level != 0U) {
p_TCB = p_MCB->owner;
/* Remove mutex from task mutex owner list. */
p_mlnk = p_TCB->p_mlnk;
if (p_mlnk == p_MCB) {
p_TCB->p_mlnk = p_MCB->p_mlnk;
}
else {
while (p_mlnk) {
if (p_mlnk->p_mlnk == p_MCB) {
p_mlnk->p_mlnk = p_MCB->p_mlnk;
break;
}
p_mlnk = p_mlnk->p_mlnk;
}
}
/* Restore owner task's priority. */
prio = p_TCB->prio_base;
p_mlnk = p_TCB->p_mlnk;
while (p_mlnk) {
if ((p_mlnk->p_lnk != NULL) && (p_mlnk->p_lnk->prio > prio)) {
/* A task with higher priority is waiting for mutex. */
prio = p_mlnk->p_lnk->prio;
}
p_mlnk = p_mlnk->p_mlnk;
}
if (p_TCB->prio != prio) {
p_TCB->prio = prio;
if (p_TCB != os_tsk.run) {
rt_resort_prio (p_TCB);
}
}
}
while (p_MCB->p_lnk != NULL) {
/* A task is waiting for mutex. */
p_TCB = rt_get_first ((P_XCB)p_MCB);
rt_ret_val(p_TCB, 0U/*osOK*/);
rt_rmv_dly(p_TCB);
p_TCB->state = READY;
rt_put_prio (&os_rdy, p_TCB);
}
if ((os_rdy.p_lnk != NULL) && (os_rdy.p_lnk->prio > os_tsk.run->prio)) {
/* preempt running task */
rt_put_prio (&os_rdy, os_tsk.run);
os_tsk.run->state = READY;
rt_dispatch (NULL);
}
p_MCB->cb_type = 0U;
return (OS_R_OK);
}
开发者ID:DanKupiniak,项目名称:mbed,代码行数:65,代码来源:rt_Mutex.c
注:本文中的rt_put_prio函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论