C++ rtl_read_dword函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtl_read_dword函数的典型用法代码示例。如果您正苦于以下问题：C++ rtl_read_dword函数的具体用法？C++ rtl_read_dword怎么用？C++ rtl_read_dword使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtl_read_dword函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtl8723_fw_free_to_go

int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
			  int max_count)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	int err = -EIO;
	u32 counter = 0;
	u32 value32;

	do {
		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
	} while ((counter++ < max_count) &&
		 (!(value32 & FWDL_CHKSUM_RPT)));

	if (counter >= max_count) {
		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
			 "chksum report fail ! REG_MCUFWDL:0x%08x .\n",
			 value32);
		goto exit;
	}
	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
		 "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);

	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL) | MCUFWDL_RDY;
	value32 &= ~WINTINI_RDY;
	rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);

	if (is_8723be)
		rtl8723be_firmware_selfreset(hw);
	counter = 0;

	do {
		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
		if (value32 & WINTINI_RDY) {
			RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
				 "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
				 value32);
			err = 0;
			goto exit;
		}

		mdelay(FW_8192C_POLLING_DELAY);

	} while (counter++ < max_count);

	RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
		 value32);

exit:
	return err;
}

开发者ID:020gzh，项目名称:linux，代码行数:51，代码来源:fw_common.c

示例2: rtl92cu_phy_bb_config

bool rtl92cu_phy_bb_config( struct ieee80211_hw *hw )
{
	bool rtstatus = true;
	struct rtl_priv *rtlpriv = rtl_priv( hw );
	struct rtl_hal *rtlhal = rtl_hal( rtl_priv( hw ) );
	u16 regval;
	u32 regval32;
	u8 b_reg_hwparafile = 1;

	_rtl92c_phy_init_bb_rf_register_definition( hw );
	regval = rtl_read_word( rtlpriv, REG_SYS_FUNC_EN );
	rtl_write_word( rtlpriv, REG_SYS_FUNC_EN, regval | BIT( 13 ) |
		       BIT( 0 ) | BIT( 1 ) );
	rtl_write_byte( rtlpriv, REG_AFE_PLL_CTRL, 0x83 );
	rtl_write_byte( rtlpriv, REG_AFE_PLL_CTRL + 1, 0xdb );
	rtl_write_byte( rtlpriv, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB );
	if ( IS_HARDWARE_TYPE_8192CE( rtlhal ) ) {
		rtl_write_byte( rtlpriv, REG_SYS_FUNC_EN, FEN_PPLL | FEN_PCIEA |
			       FEN_DIO_PCIE |	FEN_BB_GLB_RSTn | FEN_BBRSTB );
	} else if ( IS_HARDWARE_TYPE_8192CU( rtlhal ) ) {
		rtl_write_byte( rtlpriv, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD |
			       FEN_BB_GLB_RSTn | FEN_BBRSTB );
	}
	regval32 = rtl_read_dword( rtlpriv, 0x87c );
	rtl_write_dword( rtlpriv, 0x87c, regval32 & ( ~BIT( 31 ) ) );
	if ( IS_HARDWARE_TYPE_8192CU( rtlhal ) )
		rtl_write_byte( rtlpriv, REG_LDOHCI12_CTRL, 0x0f );
	rtl_write_byte( rtlpriv, REG_AFE_XTAL_CTRL + 1, 0x80 );
	if ( b_reg_hwparafile == 1 )
		rtstatus = _rtl92c_phy_bb8192c_config_parafile( hw );
	return rtstatus;
}

开发者ID:Meticulus，项目名称:rtl8188ce-linux-driver，代码行数:32，代码来源:phy.c

示例3: rtl92ee_sw_led_off

void rtl92ee_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u32 ledcfg;

	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
		 "LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin);

	switch (pled->ledpin) {
	case LED_PIN_GPIO0:
		break;
	case LED_PIN_LED0:

		ledcfg = rtl_read_dword(rtlpriv , REG_GPIO_PIN_CTRL);
		ledcfg |= ~BIT(21);
		ledcfg &= ~BIT(29);
		rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, ledcfg);

		break;
	case LED_PIN_LED1:

		break;
	default:
		RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
			 "switch case not process\n");
		break;
	}
	pled->ledon = false;
}

开发者ID:54shaoji，项目名称:rtlwifi_new，代码行数:29，代码来源:led.c

示例4: halbtc_read_4byte

u32 halbtc_read_4byte(void *bt_context, u32 reg_addr)
{
	struct btc_coexist *btcoexist = (struct btc_coexist *)bt_context;
	struct rtl_priv *rtlpriv = btcoexist->adapter;
	
	return	rtl_read_dword(rtlpriv, reg_addr);
}

开发者ID:IDM350，项目名称:linux，代码行数:7，代码来源:halbtcoutsrc.c

示例5: rtl8822be_rx_desc_buff_remained_cnt

u16 rtl8822be_rx_desc_buff_remained_cnt(struct ieee80211_hw *hw, u8 queue_index)
{
	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u16 desc_idx_hw = 0, desc_idx_host = 0, remind_cnt = 0;
	u32 tmp_4byte = 0;

	u32 rw_mask = 0x1ff;

	tmp_4byte = rtl_read_dword(rtlpriv, REG_RXQ_RXBD_IDX_8822B);
	desc_idx_hw = (u16)((tmp_4byte >> 16) & rw_mask);
	desc_idx_host = (u16)(tmp_4byte & rw_mask);

	/* may be no data, donot rx */
	if (desc_idx_hw == desc_idx_host)
		return 0;

	remind_cnt =
		(desc_idx_hw > desc_idx_host) ?
			(desc_idx_hw - desc_idx_host) :
			(RX_DESC_NUM_8822BE - (desc_idx_host - desc_idx_hw));

	rtlpci->rx_ring[queue_index].next_rx_rp = desc_idx_host;

	return remind_cnt;
}

开发者ID:mkrufky，项目名称:linux，代码行数:26，代码来源:trx.c

示例6: rtl_btc_is_disable_edca_turbo

bool rtl_btc_is_disable_edca_turbo(struct rtl_priv *rtlpriv)
{
	bool bt_change_edca = false;
	u32 cur_edca_val;
	u32 edca_bt_hs_uplink = 0x5ea42b, edca_bt_hs_downlink = 0x5ea42b;
	u32 edca_hs;
	u32 edca_addr = 0x504;

	cur_edca_val = rtl_read_dword(rtlpriv, edca_addr);
	if (halbtc_is_wifi_uplink(rtlpriv)) {
		if (cur_edca_val != edca_bt_hs_uplink) {
			edca_hs = edca_bt_hs_uplink;
			bt_change_edca = true;
		}
	} else {
		if (cur_edca_val != edca_bt_hs_downlink) {
			edca_hs = edca_bt_hs_downlink;
			bt_change_edca = true;
		}
	}

	if (bt_change_edca)
		rtl_write_dword(rtlpriv, edca_addr, edca_hs);

	return true;
}

开发者ID:4T-Shirt，项目名称:rtlwifi_new，代码行数:26，代码来源:rtl_btc.c

示例7: rtl92c_phy_bb_config

bool rtl92c_phy_bb_config(struct ieee80211_hw *hw)
{
	bool rtstatus = true;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u16 regval;
	u32 regvaldw;
	u8 reg_hwparafile = 1;

	_rtl92c_phy_init_bb_rf_register_definition(hw);
	regval = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN,
		       regval | BIT(13) | BIT(0) | BIT(1));
	rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x83);
	rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL + 1, 0xdb);
	rtl_write_byte(rtlpriv, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB);
	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN,
		       FEN_PPLL | FEN_PCIEA | FEN_DIO_PCIE |
		       FEN_BB_GLB_RSTn | FEN_BBRSTB);
	rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0x80);
	regvaldw = rtl_read_dword(rtlpriv, REG_LEDCFG0);
	rtl_write_dword(rtlpriv, REG_LEDCFG0, regvaldw | BIT(23));
	if (reg_hwparafile == 1)
		rtstatus = _rtl92c_phy_bb8192c_config_parafile(hw);
	return rtstatus;
}

开发者ID:791254467，项目名称:u8500_kernel，代码行数:25，代码来源:phy.c

示例8: _r92su_fw_reg_ready

static void _r92su_fw_reg_ready(struct rtl_priv *rtlpriv)
{
	unsigned int delay_count = 10;
	do {
		if (rtl_read_dword(rtlpriv, RF_BB_CMD_ADDR) == 0)
			break;
		udelay(5);
	} while (delay_count--);
}

开发者ID:ericdjobs，项目名称:rtl8192su，代码行数:9，代码来源:hw.c

示例9: rtl_proc_get_cam_register_1

static int rtl_proc_get_cam_register_1(char *page, char **start,
		off_t offset, int count, int *eof, void *data)
{
	struct ieee80211_hw *hw = data;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u32 target_cmd = 0;
	u32 target_val=0;
	u8 entry_i=0;
	u32 ulstatus;
	int len = 0;
	int i = 100, j = 0;

	/* This dump the current register page */
	len += snprintf(page + len, count - len,
		"\n#################### SECURITY CAM (0-10) ##################\n ");

	for (j = 0; j < 11; j++) {
		len += snprintf(page + len, count - len, "\nD:  %2x > ", j);
	 	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
	   		/* polling bit, and No Write enable, and address  */
			target_cmd = entry_i + CAM_CONTENT_COUNT * j;
			target_cmd = target_cmd | BIT(31);

			/* Check polling bit is clear */
			while ((i--) >= 0) {
				ulstatus = rtl_read_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM]);
				if (ulstatus & BIT(31)) {
					continue;
				} else {
					break;
				}
			}

	  		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], target_cmd);
	  	 	target_val = rtl_read_dword(rtlpriv, rtlpriv->cfg->maps[RCAMO]);
			len += snprintf(page + len, count - len, "%8.8x ", target_val);
	 	}
	}

	len += snprintf(page + len, count - len,"\n");
	*eof = 1;
	return len;
}

开发者ID:aru132，项目名称:RTL_DRIVER_FOR_LINUX391，代码行数:43，代码来源:debug.c

示例10: rtl_proc_get_cam_register_1

static int rtl_proc_get_cam_register_1(struct seq_file *m, void *v)
{
	struct ieee80211_hw *hw = m->private;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u32 target_cmd = 0;
	u32 target_val=0;
	u8 entry_i=0;
	u32 ulstatus;
	int i = 100, j = 0;

	/* This dump the current register page */
	seq_puts(m,
	    "\n#################### SECURITY CAM (0-10) ##################\n ");

	for (j = 0; j < 11; j++) {
		seq_printf(m, "\nD:  %2x > ", j);
	 	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
	   		/* polling bit, and No Write enable, and address  */
			target_cmd = entry_i + CAM_CONTENT_COUNT * j;
			target_cmd = target_cmd | BIT(31);

			/* Check polling bit is clear */
			while ((i--) >= 0) {
				ulstatus = rtl_read_dword(rtlpriv,
						rtlpriv->cfg->maps[RWCAM]);
				if (ulstatus & BIT(31)) {
					continue;
				} else {
					break;
				}
			}

	  		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
					target_cmd);
	  	 	target_val = rtl_read_dword(rtlpriv,
						    rtlpriv->cfg->maps[RCAMO]);
			seq_printf(m, "%8.8x ", target_val);
	 	}
	}
	seq_puts(m, "\n");
	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:42，代码来源:debug.c

示例11: rtl92s_fw_iocmd_data

void rtl92s_fw_iocmd_data(struct ieee80211_hw *hw, u32* cmd, u8 flag)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);

	if (flag == 0) {
		/* set */
		rtl_write_dword(rtlpriv, REG_IOCMD_DATA, *cmd);
	} else {
		/* query */
		*cmd = rtl_read_dword(rtlpriv, REG_IOCMD_DATA);
	}
}

开发者ID:kyalipay，项目名称:rtl8192su，代码行数:12，代码来源:fw.c

示例12: rtl_proc_get_cam_register_3

static int rtl_proc_get_cam_register_3(struct seq_file *m, void *v)
{
	struct ieee80211_hw *hw = m->private;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u32 target_cmd = 0;
	u32 target_val = 0;
	u8 entry_i = 0;
	u32 ulstatus;
	int i = 100, j = 0;

	/* This dump the current register page */
	seq_puts(m,
	    "\n################### SECURITY CAM (22-31) ##################\n ");

	for (j = 22; j < TOTAL_CAM_ENTRY; j++) {
		seq_printf(m, "\nD:  %2x > ", j);
	 	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
			target_cmd = entry_i+CAM_CONTENT_COUNT*j;
			target_cmd = target_cmd | BIT(31);

			while ((i--) >= 0) {
				ulstatus = rtl_read_dword(rtlpriv,
						rtlpriv->cfg->maps[RWCAM]);
				if (ulstatus & BIT(31)) {
					continue;
				} else {
					break;
				}
			}

	  		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
					target_cmd);
	  	 	target_val = rtl_read_dword(rtlpriv,
						    rtlpriv->cfg->maps[RCAMO]);
			seq_printf(m, "%8.8x ", target_val);
	 	}
	}
	seq_puts(m, "\n");
	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:40，代码来源:debug.c

示例13: rtl92s_fw_iocmd

u8 rtl92s_fw_iocmd(struct ieee80211_hw *hw, const u32 cmd)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	int pollcount = 50;

	rtl_write_dword(rtlpriv, REG_IOCMD_CTRL, cmd);
	msleep(100);
	while (rtl_read_dword(rtlpriv, REG_IOCMD_CTRL) && pollcount > 0) {
		pollcount--;
		msleep(20);
	}

	return !!pollcount;
}

开发者ID:kyalipay，项目名称:rtl8192su，代码行数:14，代码来源:fw.c

示例14: rtl92su_set_check_bssid

void rtl92su_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u32 reg_rcr = rtl_read_dword(rtlpriv, RCR);

	if (rtlpriv->psc.rfpwr_state != ERFON)
		return;

	if (check_bssid)
		reg_rcr |= RCR_CBSSID;
	else
		reg_rcr &= ~RCR_CBSSID;
	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
				      (u8 *) (&reg_rcr));
}

开发者ID:ericdjobs，项目名称:rtl8192su，代码行数:15，代码来源:hw.c

示例15: rtl_proc_get_mac_0

static int rtl_proc_get_mac_0(struct seq_file *m, void *v)
{
	struct ieee80211_hw *hw = m->private;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	int i, n, page;
	int max = 0xff;
	page = 0x000;

	for (n = 0; n <= max; ) {
		seq_printf(m, "\n%8.8x  ", n + page);
		for (i = 0; i < 4 && n <= max; i++, n += 4)
			seq_printf(m, "%8.8x    ",
				   rtl_read_dword(rtlpriv, (page | n)));
	}
	seq_puts(m, "\n");
	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:17，代码来源:debug.c

示例16: rtw_ips_leave

int rtw_ips_leave(struct rtl_priv * rtlpriv)
{
	struct pwrctrl_priv *pwrpriv = &rtlpriv->pwrctrlpriv;
	struct security_priv* psecuritypriv=&(rtlpriv->securitypriv);
	struct mlme_priv *pmlmepriv = &(rtlpriv->mlmepriv);
	int result = _SUCCESS;
	sint keyid;

	down(&pwrpriv->lock);

	if ((pwrpriv->rf_pwrstate == rf_off) &&(!pwrpriv->bips_processing)) {
		pwrpriv->bips_processing = _TRUE;
		pwrpriv->change_rfpwrstate = rf_on;
		pwrpriv->ips_leave_cnts++;
		DBG_871X("==>ips_leave cnts:%d\n",pwrpriv->ips_leave_cnts);

		if ((result = rtw_ips_pwr_up(rtlpriv)) == _SUCCESS) {
			pwrpriv->rf_pwrstate = rf_on;
		}
		DBG_871X_LEVEL(_drv_always_, "nolinked power save leave\n");

		if ((_WEP40_ == psecuritypriv->dot11PrivacyAlgrthm)
		   ||(_WEP104_ == psecuritypriv->dot11PrivacyAlgrthm)) {
			DBG_871X("==>%s,channel(%d),processing(%x)\n",__FUNCTION__,rtlpriv->mlmeextpriv.cur_channel,pwrpriv->bips_processing);
			set_channel_bwmode(rtlpriv, rtlpriv->mlmeextpriv.cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, CHANNEL_WIDTH_20);
			for (keyid = 0; keyid < 4; keyid++) {
				if (pmlmepriv->key_mask & BIT(keyid)) {
					if (keyid == psecuritypriv->dot11PrivacyKeyIndex)
						result=rtw_set_key(rtlpriv,psecuritypriv, keyid, 1);
					else
						result=rtw_set_key(rtlpriv,psecuritypriv, keyid, 0);
				}
			}
		}

		DBG_871X("==> ips_leave.....LED(0x%08x)...\n",rtl_read_dword(rtlpriv,0x4c));
		pwrpriv->bips_processing = _FALSE;

		pwrpriv->bpower_saving = _FALSE;
	}

	up(&pwrpriv->lock);

	return result;
}

开发者ID:paralin，项目名称:rtl8821au-1，代码行数:45，代码来源:rtw_pwrctrl.c

示例17: rtw_ips_leave

int rtw_ips_leave(struct rtl_priv * rtlpriv)
{
	struct pwrctrl_priv *pwrpriv = &rtlpriv->pwrctrlpriv;
	struct security_priv* psecuritypriv=&(rtlpriv->securitypriv);
	struct mlme_priv *pmlmepriv = &(rtlpriv->mlmepriv);
	int result = _SUCCESS;
	int keyid;

	down(&pwrpriv->lock);

	if ((pwrpriv->rf_pwrstate == ERFOFF) &&(!pwrpriv->bips_processing)) {
		pwrpriv->bips_processing = true;
		pwrpriv->change_rfpwrstate = ERFON;
		pwrpriv->ips_leave_cnts++;
		RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "==>ips_leave cnts:%d\n",pwrpriv->ips_leave_cnts);

		if ((result = rtw_ips_pwr_up(rtlpriv)) == _SUCCESS) {
			pwrpriv->rf_pwrstate = ERFON;
		}
		RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "nolinked power save leave\n");

		if ((WEP40_ENCRYPTION == psecuritypriv->dot11PrivacyAlgrthm)
		   ||(WEP104_ENCRYPTION == psecuritypriv->dot11PrivacyAlgrthm)) {
			RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "==>%s,channel(%d),processing(%x)\n",__FUNCTION__,rtlpriv->mlmeextpriv.cur_channel,pwrpriv->bips_processing);
			set_channel_bwmode(rtlpriv, rtlpriv->mlmeextpriv.cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, CHANNEL_WIDTH_20);
			for (keyid = 0; keyid < 4; keyid++) {
				if (pmlmepriv->key_mask & BIT(keyid)) {
					if (keyid == psecuritypriv->dot11PrivacyKeyIndex)
						result=rtw_set_key(rtlpriv,psecuritypriv, keyid, 1);
					else
						result=rtw_set_key(rtlpriv,psecuritypriv, keyid, 0);
				}
			}
		}

		RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "==> ips_leave.....LED(0x%08x)...\n",rtl_read_dword(rtlpriv,0x4c));
		pwrpriv->bips_processing = false;

		pwrpriv->bpower_saving = false;
	}

	up(&pwrpriv->lock);

	return result;
}

开发者ID:ulli-kroll，项目名称:rtl8821au，代码行数:45，代码来源:rtw_pwrctrl.c

示例18: rtl92su_allow_all_destaddr

/* Turn on AAP (RCR:bit 0) for promicuous mode. */
void rtl92su_allow_all_destaddr(struct ieee80211_hw *hw,
				bool allow_all_da, bool write_into_reg)
{
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	u32 reg_rcr = rtl_read_dword(rtlpriv, RCR);

	if (allow_all_da) /* Set BIT0 */
		reg_rcr |= RCR_AAP;
	else /* Clear BIT0 */
		reg_rcr &= ~RCR_AAP;

	if (write_into_reg)
		rtl_write_dword(rtlpriv, RCR, reg_rcr);

	RT_TRACE(rtlpriv, COMP_TURBO | COMP_INIT, DBG_LOUD,
		 "receive_config=0x%08X, write_into_reg=%d\n",
		 reg_rcr, write_into_reg);
}

开发者ID:ericdjobs，项目名称:rtl8192su，代码行数:19，代码来源:hw.c

示例19: rtl92c_init_adaptive_ctrl

void rtl92c_init_adaptive_ctrl(struct ieee80211_hw *hw)
{
	u16	value16;
	u32	value32;
	struct rtl_priv *rtlpriv = rtl_priv(hw);

	/* Response Rate Set */
	value32 = rtl_read_dword(rtlpriv, REG_RRSR);
	value32 &= ~RATE_BITMAP_ALL;
	value32 |= RATE_RRSR_CCK_ONLY_1M;
	rtl_write_dword(rtlpriv, REG_RRSR, value32);
	/* SIFS (used in NAV) */
	value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10);
	rtl_write_word(rtlpriv,  REG_SPEC_SIFS, value16);
	/* Retry Limit */
	value16 = _LRL(0x30) | _SRL(0x30);
	rtl_write_dword(rtlpriv,  REG_RL, value16);
}

开发者ID:7799，项目名称:linux，代码行数:18，代码来源:mac.c

示例20: rtl_proc_get_mac_1

static int rtl_proc_get_mac_1(char *page, char **start,
		off_t offset, int count, int *eof, void *data)
{
	struct ieee80211_hw *hw = data;
	struct rtl_priv *rtlpriv = rtl_priv(hw);
	int len = 0;
	int i, n, page0;
	int max = 0xff;
	page0 = 0x100;

	for (n = 0; n <= max; ) {
		len += snprintf(page + len, count - len, "\n%8.8x  ", n + page0);
		for (i = 0; i < 4 && n <= max; i++, n += 4)
			len += snprintf(page + len, count - len,
				"%8.8x    ", rtl_read_dword(rtlpriv, (page0 | n)));
	}

	len += snprintf(page + len, count - len, "\n");
	*eof = 1;
	return len;

}

开发者ID:aru132，项目名称:RTL_DRIVER_FOR_LINUX391，代码行数:22，代码来源:debug.c

注：本文中的rtl_read_dword函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtl_write_dword函数代码示例发布时间：2022-05-31

C++ rtl_read_byte函数代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18175|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9641|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8166|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8542|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8444|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9368|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8415|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7852|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8399|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ rtl_read_dword函数代码示例

示例1: rtl8723_fw_free_to_go

示例2: rtl92cu_phy_bb_config

示例3: rtl92ee_sw_led_off

示例4: halbtc_read_4byte

示例5: rtl8822be_rx_desc_buff_remained_cnt

示例6: rtl_btc_is_disable_edca_turbo

示例7: rtl92c_phy_bb_config

示例8: _r92su_fw_reg_ready

示例9: rtl_proc_get_cam_register_1

示例10: rtl_proc_get_cam_register_1

示例11: rtl92s_fw_iocmd_data

示例12: rtl_proc_get_cam_register_3

示例13: rtl92s_fw_iocmd

示例14: rtl92su_set_check_bssid

示例15: rtl_proc_get_mac_0

示例16: rtw_ips_leave

示例17: rtw_ips_leave

示例18: rtl92su_allow_all_destaddr

示例19: rtl92c_init_adaptive_ctrl

示例20: rtl_proc_get_mac_1

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-31556

头发稀少怎么变浓密

CVE-2022-34754

haveachin/infrared: An ultra lightweight

ArthurClemens/polythene: Material Design

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053