C++ rtllib_priv函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtllib_priv函数的典型用法代码示例。如果您正苦于以下问题：C++ rtllib_priv函数的具体用法？C++ rtllib_priv怎么用？C++ rtllib_priv使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtllib_priv函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtl8192_rfkill_init

bool rtl8192_rfkill_init(struct net_device *dev)
{
	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);
	struct wireless_dev *wdev = &priv->rtllib->wdev;
	bool radio_enabled;
	bool valid = rtl8192_is_radio_enabled(dev, &radio_enabled);

	if (valid) {
		priv->rfkill_off = radio_enabled;
		printk(KERN_INFO "rtl8192: wireless switch is %s\n",
				priv->rfkill_off ? "on" : "off");
		wiphy_rfkill_set_hw_state(wdev->wiphy, !priv->rfkill_off);
		wiphy_rfkill_start_polling(wdev->wiphy);
		return true;
	} else {
		return false;
	}
}

开发者ID:UNwS，项目名称:rtl8192su，代码行数:18，代码来源:rtl_rfkill.c

示例2: r8192_wx_set_debugflag

static int r8192_wx_set_debugflag(struct net_device *dev,
                                  struct iw_request_info *info,
                                  union iwreq_data *wrqu, char *extra)
{
    struct r8192_priv *priv = rtllib_priv(dev);
    u8 c = *extra;

    if (priv->bHwRadioOff == true)
        return 0;

    printk(KERN_INFO "=====>%s(), *extra:%x, debugflag:%x\n", __func__,
           *extra, rt_global_debug_component);
    if (c > 0)
        rt_global_debug_component |= (1<<c);
    else
        rt_global_debug_component &= BIT31;
    return 0;
}

开发者ID:kennethlyn，项目名称:enclustra_zynq_linux，代码行数:18，代码来源:rtl_wx.c

示例3: r8192_wx_set_rts

static int r8192_wx_set_rts(struct net_device *dev,
                            struct iw_request_info *info,
                            union iwreq_data *wrqu, char *extra)
{
    int ret;
    struct r8192_priv *priv = rtllib_priv(dev);

    if (priv->bHwRadioOff == true)
        return 0;

    down(&priv->wx_sem);

    ret = rtllib_wx_set_rts(priv->rtllib, info, wrqu, extra);

    up(&priv->wx_sem);

    return ret;
}

开发者ID:kennethlyn，项目名称:enclustra_zynq_linux，代码行数:18，代码来源:rtl_wx.c

示例4: r8192_wx_get_PromiscuousMode

static int r8192_wx_get_PromiscuousMode(struct net_device *dev,
			       struct iw_request_info *info,
			       union iwreq_data *wrqu, char *extra)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	struct rtllib_device *ieee = priv->rtllib;

	down(&priv->wx_sem);

	snprintf(extra, 45, "PromiscuousMode:%d, FilterSrcSTAFrame:%d",
		 ieee->IntelPromiscuousModeInfo.bPromiscuousOn,
		 ieee->IntelPromiscuousModeInfo.bFilterSourceStationFrame);
	wrqu->data.length = strlen(extra) + 1;

	up(&priv->wx_sem);

	return 0;
}

开发者ID:454053205，项目名称:linux，代码行数:18，代码来源:rtl_wx.c

示例5: firmware_check_ready

static bool firmware_check_ready(struct net_device *dev,
					u8 load_fw_status)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	struct rt_firmware *pfirmware = priv->pFirmware;
	bool rt_status  = true;

	switch (load_fw_status) {
	case FW_INIT_STEP0_BOOT:
		pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
		break;

	case FW_INIT_STEP1_MAIN:
		pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;

		rt_status = CPUcheck_maincodeok_turnonCPU(dev);
		if (rt_status)
			pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
		else
			RT_TRACE(COMP_FIRMWARE, "CPUcheck_maincodeok_turnon"
				 "CPU fail!\n");

		break;

	case FW_INIT_STEP2_DATA:
		pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
		mdelay(1);

		rt_status = CPUcheck_firmware_ready(dev);
		if (rt_status)
			pfirmware->firmware_status = FW_STATUS_5_READY;
		else
			RT_TRACE(COMP_FIRMWARE, "CPUcheck_firmware_ready fail"
				 "(%d)!\n", rt_status);

		break;
	default:
		rt_status = false;
		RT_TRACE(COMP_FIRMWARE, "Unknown firmware status");
		break;
	}

	return rt_status;
}

开发者ID:7799，项目名称:linux，代码行数:44，代码来源:r8192E_firmware.c

示例6: r8192_wx_set_retry

static int r8192_wx_set_retry(struct net_device *dev,
				struct iw_request_info *info,
				union iwreq_data *wrqu, char *extra)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	int err = 0;

	if (priv->bHwRadioOff == true)
		return 0;

	down(&priv->wx_sem);

	if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
	    wrqu->retry.disabled) {
		err = -EINVAL;
		goto exit;
	}
	if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) {
		err = -EINVAL;
		goto exit;
	}

	if (wrqu->retry.value > R8192_MAX_RETRY) {
		err = -EINVAL;
		goto exit;
	}
	if (wrqu->retry.flags & IW_RETRY_MAX) {
		priv->retry_rts = wrqu->retry.value;
		DMESG("Setting retry for RTS/CTS data to %d",
		      wrqu->retry.value);

	} else {
		priv->retry_data = wrqu->retry.value;
		DMESG("Setting retry for non RTS/CTS data to %d",
		      wrqu->retry.value);
	}


	rtl8192_commit(dev);
exit:
	up(&priv->wx_sem);

	return err;
}

开发者ID:454053205，项目名称:linux，代码行数:44，代码来源:rtl_wx.c

示例7: rtl8192E_resume

int rtl8192E_resume(struct pci_dev *pdev)
{
	struct net_device *dev = pci_get_drvdata(pdev);
	struct r8192_priv *priv = rtllib_priv(dev);
	int err;
	u32 val;

	netdev_info(dev, "================>r8192E resume call.\n");

	pci_set_power_state(pdev, PCI_D0);

	err = pci_enable_device(pdev);
	if (err) {
		netdev_err(dev, "pci_enable_device failed on resume\n");
		return err;
	}
	pci_restore_state(pdev);

	pci_read_config_dword(pdev, 0x40, &val);
	if ((val & 0x0000ff00) != 0)
		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);

	pci_enable_wake(pdev, PCI_D0, 0);

	if (priv->polling_timer_on == 0)
		check_rfctrl_gpio_timer((unsigned long)dev);

	if (!netif_running(dev)) {
		netdev_info(dev,
			    "RTL819XE:UI is open out of resume function\n");
		goto out;
	}

	netif_device_attach(dev);
	if (dev->netdev_ops->ndo_open)
		dev->netdev_ops->ndo_open(dev);

	if (!priv->rtllib->bSupportRemoteWakeUp)
		MgntActSet_RF_State(dev, eRfOn, RF_CHANGE_BY_INIT, true);

out:
	RT_TRACE(COMP_POWER, "<================r8192E resume call.\n");
	return 0;
}

开发者ID:lovejavaee，项目名称:linux-2，代码行数:44，代码来源:rtl_pm.c

示例8: _rtl92e_fw_check_ready

static bool _rtl92e_fw_check_ready(struct net_device *dev,
				   u8 load_fw_status)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	struct rt_firmware *pfirmware = priv->pFirmware;
	bool rt_status  = true;

	switch (load_fw_status) {
	case FW_INIT_STEP0_BOOT:
		pfirmware->status = FW_STATUS_1_MOVE_BOOT_CODE;
		break;

	case FW_INIT_STEP1_MAIN:
		pfirmware->status = FW_STATUS_2_MOVE_MAIN_CODE;

		rt_status = _rtl92e_fw_boot_cpu(dev);
		if (rt_status)
			pfirmware->status = FW_STATUS_3_TURNON_CPU;
		else
			netdev_dbg(dev, "_rtl92e_fw_boot_cpu fail!\n");

		break;

	case FW_INIT_STEP2_DATA:
		pfirmware->status = FW_STATUS_4_MOVE_DATA_CODE;
		mdelay(1);

		rt_status = _rtl92e_wait_for_fw(dev, CPU_GEN_FIRM_RDY, 20);
		if (rt_status)
			pfirmware->status = FW_STATUS_5_READY;
		else
			RT_TRACE(COMP_FIRMWARE,
				 "_rtl92e_is_fw_ready fail(%d)!\n",
				 rt_status);
		break;
	default:
		rt_status = false;
		netdev_dbg(dev, "Unknown firmware status");
		break;
	}

	return rt_status;
}

开发者ID:020gzh，项目名称:linux，代码行数:43，代码来源:r8192E_firmware.c

示例9: cmpk_handle_tx_rate_history

static	void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
{
	struct cmpk_tx_rahis *ptxrate;
	u8 i, j;
	u16				length = sizeof(struct cmpk_tx_rahis);
	u32 *ptemp;
	struct r8192_priv *priv = rtllib_priv(dev);

#ifdef ENABLE_PS
	pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
					 (pu1Byte)(&rtState));

	if (rtState == eRfOff)
		return;
#endif

	ptemp = (u32 *)pmsg;

	for (i = 0; i < (length / 4); i++) {
		u16	 temp1, temp2;

		temp1 = ptemp[i] & 0x0000FFFF;
		temp2 = ptemp[i] >> 16;
		ptemp[i] = (temp1 << 16) | temp2;
	}

	ptxrate = (struct cmpk_tx_rahis *)pmsg;

	if (ptxrate == NULL)
		return;

	for (i = 0; i < 16; i++) {
		if (i < 4)
			priv->stats.txrate.cck[i] += ptxrate->cck[i];

		if (i < 8)
			priv->stats.txrate.ofdm[i] += ptxrate->ofdm[i];

		for (j = 0; j < 4; j++)
			priv->stats.txrate.ht_mcs[j][i] +=
							 ptxrate->ht_mcs[j][i];
	}
}

开发者ID:19Dan01，项目名称:linux，代码行数:43，代码来源:r8192E_cmdpkt.c

示例10: _rtl92e_parse_pci_configuration

static void _rtl92e_parse_pci_configuration(struct pci_dev *pdev,
					    struct net_device *dev)
{
	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);

	u8 tmp;
	u16 LinkCtrlReg;

	pcie_capability_read_word(priv->pdev, PCI_EXP_LNKCTL, &LinkCtrlReg);

	RT_TRACE(COMP_INIT, "Link Control Register =%x\n", LinkCtrlReg);

	pci_read_config_byte(pdev, 0x98, &tmp);
	tmp |= BIT4;
	pci_write_config_byte(pdev, 0x98, tmp);

	tmp = 0x17;
	pci_write_config_byte(pdev, 0x70f, tmp);
}

开发者ID:020gzh，项目名称:linux，代码行数:19，代码来源:rtl_pci.c

示例11: rtl92e_eeprom_read

u32 rtl92e_eeprom_read(struct net_device *dev, u32 addr)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	u32 ret = 0;

	rtl92e_writeb(dev, EPROM_CMD,
		      (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
	udelay(EPROM_DELAY);

	/* EEPROM is configured as x16 */
	if (priv->epromtype == EEPROM_93C56)
		ret = _rtl92e_eeprom_xfer(dev, (addr & 0xFF) | (0x6 << 8), 11);
	else
		ret = _rtl92e_eeprom_xfer(dev, (addr & 0x3F) | (0x6 << 6), 9);

	rtl92e_writeb(dev, EPROM_CMD,
		      (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
	return ret;
}

开发者ID:020gzh，项目名称:linux，代码行数:19，代码来源:rtl_eeprom.c

示例12: rtl8192_is_radio_enabled

static bool rtl8192_is_radio_enabled(struct net_device *dev, bool *radio_enabled)
{
	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);
	bool rf_state = false;
	bool turnonbypowerdomain = false;
	bool valid;

	rtl8192_before_radio_check(dev, &rf_state, &turnonbypowerdomain);
	*radio_enabled = rtl8192_radio_on_off_checking(dev);
	rtl8192_after_radio_check(dev, rf_state, turnonbypowerdomain);
	if (priv->bResetInProgress) {
		priv->RFChangeInProgress = false;
		valid = false;
	} else {
		valid = true;
	}
	
	return valid;
}

开发者ID:UNwS，项目名称:rtl8192su，代码行数:19，代码来源:rtl_rfkill.c

示例13: IPSLeave

void
IPSLeave(struct net_device *dev)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	PRT_POWER_SAVE_CONTROL	pPSC = (PRT_POWER_SAVE_CONTROL)(&(priv->rtllib->PowerSaveControl));
	RT_RF_POWER_STATE 	rtState;

	if (pPSC->bInactivePs)
	{	
		rtState = priv->rtllib->eRFPowerState;	
		if (rtState != eRfOn  && !pPSC->bSwRfProcessing && priv->rtllib->RfOffReason <= RF_CHANGE_BY_IPS)
		{
			RT_TRACE(COMP_PS, "IPSLeave(): Turn on RF.\n");
			pPSC->eInactivePowerState = eRfOn;
			priv->bInPowerSaveMode = false;
			InactivePsWorkItemCallback(dev);
		}
	}
}

开发者ID:UNwS，项目名称:rtl8192su，代码行数:19，代码来源:rtl_ps.c

示例14: rtl92e_rtllib_ips_leave_wq

void rtl92e_rtllib_ips_leave_wq(struct net_device *dev)
{
	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);
	enum rt_rf_power_state rtState;

	rtState = priv->rtllib->eRFPowerState;

	if (priv->rtllib->PowerSaveControl.bInactivePs) {
		if (rtState == eRfOff) {
			if (priv->rtllib->RfOffReason > RF_CHANGE_BY_IPS) {
				netdev_warn(dev, "%s(): RF is OFF.\n",
					    __func__);
				return;
			}
			netdev_info(dev, "=========>%s(): rtl92e_ips_leave\n",
				    __func__);
			schedule_work(&priv->rtllib->ips_leave_wq);
		}
	}
}

开发者ID:AshishNamdev，项目名称:linux，代码行数:20，代码来源:rtl_ps.c

示例15: r8192_wx_set_essid

static int r8192_wx_set_essid(struct net_device *dev,
			      struct iw_request_info *a,
			      union iwreq_data *wrqu, char *b)
{
	struct r8192_priv *priv = rtllib_priv(dev);
	int ret;

	if (priv->bHwRadioOff) {
		netdev_info(dev,
			    "=========>%s():hw radio off,or Rf state is eRfOff, return\n",
			    __func__);
		return 0;
	}
	down(&priv->wx_sem);
	ret = rtllib_wx_set_essid(priv->rtllib, a, wrqu, b);

	up(&priv->wx_sem);

	return ret;
}

开发者ID:DenisLug，项目名称:mptcp，代码行数:20，代码来源:rtl_wx.c

示例16: rtl8192se_send_scan_cmd

int rtl8192se_send_scan_cmd(struct net_device 	*dev, bool start)
{
	struct r8192_priv   *priv = rtllib_priv(dev);
	
	if(start){
		priv->rtllib->scan_watch_dog =0;
#if 0
		queue_delayed_work_rsl(priv->priv_wq,&priv->hw_scan_simu_wq,0);
#else
		rtl8192se_set_scan_cmd(dev, start);
#endif
	} else {
#if 0
		rtl8192se_rx_surveydone_cmd(dev);
#else
		rtl8192se_set_scan_cmd(dev, start);
#endif
	}
	return true;
}

开发者ID:zhangyongsu，项目名称:linux-kernel-source，代码行数:20，代码来源:r8192S_firmware.c

示例17: r8192se_wx_set_radio

static int r8192se_wx_set_radio(struct net_device *dev,
	struct iw_request_info *info,
	union iwreq_data *wrqu, char *extra)
{
	struct r8192_priv *priv = rtllib_priv(dev);

	down(&priv->wx_sem);

	printk(KERN_INFO "%s(): set radio ! extra is %d\n", __func__, *extra);
	if ((*extra != 0) && (*extra != 1)) {
		RT_TRACE(COMP_ERR, "%s(): set radio an err value,must 0(radio "
			 "off) or 1(radio on)\n", __func__);
		up(&priv->wx_sem);
		return -1;
	}
	priv->sw_radio_on = *extra;
	up(&priv->wx_sem);
	return 0;

}

开发者ID:454053205，项目名称:linux，代码行数:20，代码来源:rtl_wx.c

示例18: r8192_wx_get_gen_ie

static int r8192_wx_get_gen_ie(struct net_device *dev,
			       struct iw_request_info *info,
			       union iwreq_data *data, char *extra)
{
	int ret = 0;
	struct r8192_priv *priv = rtllib_priv(dev);
	struct rtllib_device *ieee = priv->rtllib;

	if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
		data->data.length = 0;
		return 0;
	}

	if (data->data.length < ieee->wpa_ie_len)
		return -E2BIG;

	data->data.length = ieee->wpa_ie_len;
	memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
	return ret;
}

开发者ID:454053205，项目名称:linux，代码行数:20，代码来源:rtl_wx.c

示例19: r8192_wx_set_power

static int r8192_wx_set_power(struct net_device *dev,
			     struct iw_request_info *info,
			     union iwreq_data *wrqu, char *extra)
{
	int ret;
	struct r8192_priv *priv = rtllib_priv(dev);

	if (priv->bHwRadioOff == true) {
		RT_TRACE(COMP_ERR, "%s():Hw is Radio Off, we can't set "
			 "Power,return\n", __func__);
		return 0;
	}
	down(&priv->wx_sem);

	ret = rtllib_wx_set_power(priv->rtllib, info, wrqu, extra);

	up(&priv->wx_sem);

	return ret;
}

开发者ID:454053205，项目名称:linux，代码行数:20，代码来源:rtl_wx.c

示例20: rtllib_ips_leave_wq

void rtllib_ips_leave_wq(struct net_device *dev)
{
	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);
	RT_RF_POWER_STATE	rtState;
	rtState = priv->rtllib->eRFPowerState;

	if(priv->rtllib->PowerSaveControl.bInactivePs){ 
		if(rtState == eRfOff){
			if(priv->rtllib->RfOffReason > RF_CHANGE_BY_IPS)
			{
				RT_TRACE(COMP_ERR, "%s(): RF is OFF.\n",__FUNCTION__);
				return;
			}
			else{
				printk("=========>%s(): IPSLeave\n",__FUNCTION__);
				queue_work_rsl(priv->rtllib->wq,&priv->rtllib->ips_leave_wq);				
			}
		}
	}
}

开发者ID:UNwS，项目名称:rtl8192su，代码行数:20，代码来源:rtl_ps.c

注：本文中的rtllib_priv函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtmGetErrorStatus函数代码示例发布时间：2022-05-31

C++ rtl_write_dword函数代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18175|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9641|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8166|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8542|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8444|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9368|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8415|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7852|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8399|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7391|2022-11-06

客服电话

电子邮件

C++ rtllib_priv函数代码示例

示例1: rtl8192_rfkill_init

示例2: r8192_wx_set_debugflag

示例3: r8192_wx_set_rts

示例4: r8192_wx_get_PromiscuousMode

示例5: firmware_check_ready

示例6: r8192_wx_set_retry

示例7: rtl8192E_resume

示例8: _rtl92e_fw_check_ready

示例9: cmpk_handle_tx_rate_history

示例10: _rtl92e_parse_pci_configuration

示例11: rtl92e_eeprom_read

示例12: rtl8192_is_radio_enabled

示例13: IPSLeave

示例14: rtl92e_rtllib_ips_leave_wq

示例15: r8192_wx_set_essid

示例16: rtl8192se_send_scan_cmd

示例17: r8192se_wx_set_radio

示例18: r8192_wx_get_gen_ie

示例19: r8192_wx_set_power

示例20: rtllib_ips_leave_wq

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-31556

头发稀少怎么变浓密

CVE-2022-34754

haveachin/infrared: An ultra lightweight

ArthurClemens/polythene: Material Design

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053