本文整理汇总了C++中PCB_PLOT_PARAMS类的典型用法代码示例。如果您正苦于以下问题：C++ PCB_PLOT_PARAMS类的具体用法？C++ PCB_PLOT_PARAMS怎么用？C++ PCB_PLOT_PARAMS使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了PCB_PLOT_PARAMS类的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: applyPlotSettings
void DIALOG_PLOT::applyPlotSettings()
{
REPORTER& reporter = m_messagesPanel->Reporter();
PCB_PLOT_PARAMS tempOptions;
tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetDXFPlotPolygonMode( m_DXF_plotModeOpt->GetValue() );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
if( !m_DXF_plotTextStrokeFontOpt->IsEnabled() ) // Currently, only DXF supports this option
tempOptions.SetTextMode( PLOTTEXTMODE_DEFAULT );
else
tempOptions.SetTextMode( m_DXF_plotTextStrokeFontOpt->GetValue() ?
PLOTTEXTMODE_DEFAULT : PLOTTEXTMODE_NATIVE );
// Update settings from text fields. Rewrite values back to the fields,
// since the values may have been constrained by the setters.
// read HPLG pen size (this param is stored in mils)
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenDiameter( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->SetValue( msg );
msg.Printf( _( "HPGL pen size constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
//.........这里部分代码省略.........
开发者ID:cpavlina，项目名称:kicad，代码行数:101，代码来源:dialog_plot.cpp
示例2: applyPlotSettings
void DIALOG_PLOT::applyPlotSettings()
{
REPORTER& reporter = m_messagesPanel->Reporter();
PCB_PLOT_PARAMS tempOptions;
tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
( m_drillShapeOpt->GetSelection() ) );
tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );
// Update settings from text fields. Rewrite values back to the fields,
// since the values may have been constrained by the setters.
// read HPLG pen size (this param is stored in mils)
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenDiameter( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
m_HPGLPenSizeOpt->SetValue( msg );
msg.Printf( _( "HPGL pen size constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Read HPGL pen overlay (this param is stored in mils)
msg = m_HPGLPenOverlayOpt->GetValue();
tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;
if( !tempOptions.SetHPGLPenOverlay( tmp ) )
{
msg = StringFromValue( g_UserUnit,
tempOptions.GetHPGLPenOverlay() * IU_PER_MILS );
m_HPGLPenOverlayOpt->SetValue( msg );
msg.Printf( _( "HPGL pen overlay constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
//.........这里部分代码省略.........
开发者ID:JOE-JOE-NGIGI，项目名称:kicad，代码行数:101，代码来源:dialog_plot.cpp
示例3: StartPlotBoard
/** Open a new plotfile using the options (and especially the format)
* specified in the options and prepare the page for plotting.
* Return the plotter object if OK, NULL if the file is not created
* (or has a problem)
*/
PLOTTER* StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
const wxString& aFullFileName,
const wxString& aSheetDesc )
{
// Create the plotter driver and set the few plotter specific
// options
PLOTTER* plotter = NULL;
switch( aPlotOpts->GetFormat() )
{
case PLOT_FORMAT_DXF:
plotter = new DXF_PLOTTER();
break;
case PLOT_FORMAT_POST:
PS_PLOTTER* PS_plotter;
PS_plotter = new PS_PLOTTER();
PS_plotter->SetScaleAdjust( aPlotOpts->GetFineScaleAdjustX(),
aPlotOpts->GetFineScaleAdjustY() );
plotter = PS_plotter;
break;
case PLOT_FORMAT_PDF:
plotter = new PDF_PLOTTER();
break;
case PLOT_FORMAT_HPGL:
HPGL_PLOTTER* HPGL_plotter;
HPGL_plotter = new HPGL_PLOTTER();
/* HPGL options are a little more convoluted to compute, so
they're split in an other function */
ConfigureHPGLPenSizes( HPGL_plotter, aPlotOpts );
plotter = HPGL_plotter;
break;
case PLOT_FORMAT_GERBER:
plotter = new GERBER_PLOTTER();
break;
case PLOT_FORMAT_SVG:
plotter = new SVG_PLOTTER();
break;
default:
wxASSERT( false );
return NULL;
}
// Compute the viewport and set the other options
// page layout is not mirrored, so temporary change mirror option
// just to plot the page layout
PCB_PLOT_PARAMS plotOpts = *aPlotOpts;
if( plotOpts.GetPlotFrameRef() && plotOpts.GetMirror() )
plotOpts.SetMirror( false );
initializePlotter( plotter, aBoard, &plotOpts );
if( plotter->OpenFile( aFullFileName ) )
{
plotter->StartPlot();
// Plot the frame reference if requested
if( aPlotOpts->GetPlotFrameRef() )
{
PlotWorkSheet( plotter, aBoard->GetTitleBlock(),
aBoard->GetPageSettings(),
1, 1, // Only one page
aSheetDesc, aBoard->GetFileName() );
if( aPlotOpts->GetMirror() )
initializePlotter( plotter, aBoard, aPlotOpts );
}
/* When plotting a negative board: draw a black rectangle
* (background for plot board in white) and switch the current
* color to WHITE; note the color inversion is actually done
* in the driver (if supported) */
if( aPlotOpts->GetNegative() )
{
EDA_RECT bbox = aBoard->ComputeBoundingBox();
FillNegativeKnockout( plotter, bbox );
}
return plotter;
}
delete plotter;
return NULL;
}
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:97，代码来源:plot_board_layers.cpp
示例4: PlotSilkScreen
/* Creates the plot for silkscreen layers
* Silkscreen layers have specific requirement for pads (not filled) and texts
* (with option to remove them from some copper areas (pads...)
*/
void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, LAYER_MSK aLayerMask,
const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Plot footprint outlines :
itemplotter.Plot_Edges_Modules();
// Plot pads (creates pads outlines, for pads on silkscreen layers)
int layersmask_plotpads = aLayerMask;
// Calculate the mask layers of allowed layers for pads
if( !aPlotOpt.GetPlotPadsOnSilkLayer() ) // Do not plot pads on silk screen layers
layersmask_plotpads &= ~(SILKSCREEN_LAYER_BACK | SILKSCREEN_LAYER_FRONT );
if( layersmask_plotpads )
{
for( MODULE* Module = aBoard->m_Modules; Module; Module = Module->Next() )
{
for( D_PAD * pad = Module->Pads(); pad != NULL; pad = pad->Next() )
{
// See if the pad is on this layer
LAYER_MSK masklayer = pad->GetLayerMask();
if( (masklayer & layersmask_plotpads) == 0 )
continue;
EDA_COLOR_T color = ColorFromInt(0);
if( (layersmask_plotpads & SILKSCREEN_LAYER_BACK) )
color = aBoard->GetLayerColor( SILKSCREEN_N_BACK );
if((layersmask_plotpads & SILKSCREEN_LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetLayerColor( SILKSCREEN_N_FRONT ) );
itemplotter.PlotPad( pad, color, LINE );
}
}
}
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
// Plot filled areas
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* edge_zone = aBoard->GetArea( ii );
if( ( GetLayerMask( edge_zone->GetLayer() ) & aLayerMask ) == 0 )
continue;
itemplotter.PlotFilledAreas( edge_zone );
}
// Plot segments used to fill zone areas (outdated, but here for old boards
// compatibility):
for( SEGZONE* seg = aBoard->m_Zone; seg != NULL; seg = seg->Next() )
{
if( ( GetLayerMask( seg->GetLayer() ) & aLayerMask ) == 0 )
continue;
aPlotter->ThickSegment( seg->GetStart(), seg->GetEnd(), seg->GetWidth(),
itemplotter.GetMode() );
}
}
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:78，代码来源:plot_board_layers.cpp
示例5: PlotSolderMaskLayer
/* Plot a solder mask layer.
* Solder mask layers have a minimum thickness value and cannot be drawn like standard layers,
* unless the minimum thickness is 0.
* Currently the algo is:
* 1 - build all pad shapes as polygons with a size inflated by
* mask clearance + (min width solder mask /2)
* 2 - Merge shapes
* 3 - deflate result by (min width solder mask /2)
* 4 - oring result by all pad shapes as polygons with a size inflated by
* mask clearance only (because deflate sometimes creates shape artifacts)
* 5 - draw result as polygons
*
* TODO:
* make this calculation only for shapes with clearance near than (min width solder mask)
* (using DRC algo)
* plot all other shapes by flashing the basing shape
* (shapes will be better, and calculations faster)
*/
void PlotSolderMaskLayer( BOARD *aBoard, PLOTTER* aPlotter,
LAYER_MSK aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt,
int aMinThickness )
{
LAYER_NUM layer = ( aLayerMask & SOLDERMASK_LAYER_BACK ) ?
SOLDERMASK_N_BACK : SOLDERMASK_N_FRONT;
int inflate = aMinThickness/2;
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( layer != item->GetLayer() )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Build polygons for each pad shape.
// the size of the shape on solder mask should be:
// size of pad + clearance around the pad.
// clearance = solder mask clearance + extra margin
// extra margin is half the min width for solder mask
// This extra margin is used to merge too close shapes
// (distance < aMinThickness), and will be removed when creating
// the actual shapes
CPOLYGONS_LIST bufferPolys; // Contains shapes to plot
CPOLYGONS_LIST initialPolys; // Contains exact shapes to plot
/* calculates the coeff to compensate radius reduction of holes clearance
* due to the segment approx ( 1 /cos( PI/circleToSegmentsCount )
*/
int circleToSegmentsCount = 32;
double correction = 1.0 / cos( M_PI / circleToSegmentsCount );
// Plot pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
// add shapes with exact size
module->TransformPadsShapesWithClearanceToPolygon( layer,
initialPolys, 0,
circleToSegmentsCount, correction );
// add shapes inflated by aMinThickness/2
module->TransformPadsShapesWithClearanceToPolygon( layer,
bufferPolys, inflate,
circleToSegmentsCount, correction );
}
// Plot vias on solder masks, if aPlotOpt.GetPlotViaOnMaskLayer() is true,
if( aPlotOpt.GetPlotViaOnMaskLayer() )
{
// The current layer is a solder mask,
// use the global mask clearance for vias
int via_clearance = aBoard->GetDesignSettings().m_SolderMaskMargin;
int via_margin = via_clearance + inflate;
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* via = dynamic_cast<const VIA*>( track );
if( !via )
continue;
// vias are plotted only if they are on the corresponding
// external copper layer
LAYER_MSK via_mask_layer = via->GetLayerMask();
if( via_mask_layer & LAYER_BACK )
//.........这里部分代码省略.........
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:101，代码来源:plot_board_layers.cpp
示例6: PlotStandardLayer
/* Plot a copper layer or mask.
* Silk screen layers are not plotted here.
*/
void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter,
LAYER_MSK aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
EDA_DRAW_MODE_T plotMode = aPlotOpt.GetMode();
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Draw footprint shapes without pads (pads will plotted later)
// We plot here module texts, but they are usually on silkscreen layer,
// so they are not plot here but plot by PlotSilkScreen()
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( ! (aLayerMask & GetLayerMask( item->GetLayer() ) ) )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Plot footprint pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( (pad->GetLayerMask() & aLayerMask) == 0 )
continue;
wxSize margin;
double width_adj = 0;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
switch( aLayerMask &
( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT |
SOLDERPASTE_LAYER_BACK | SOLDERPASTE_LAYER_FRONT ) )
{
case SOLDERMASK_LAYER_FRONT:
case SOLDERMASK_LAYER_BACK:
margin.x = margin.y = pad->GetSolderMaskMargin();
break;
case SOLDERPASTE_LAYER_FRONT:
case SOLDERPASTE_LAYER_BACK:
margin = pad->GetSolderPasteMargin();
break;
default:
break;
}
wxSize padPlotsSize;
padPlotsSize.x = pad->GetSize().x + ( 2 * margin.x ) + width_adj;
padPlotsSize.y = pad->GetSize().y + ( 2 * margin.y ) + width_adj;
// Don't draw a null size item :
if( padPlotsSize.x <= 0 || padPlotsSize.y <= 0 )
continue;
EDA_COLOR_T color = BLACK;
if( (pad->GetLayerMask() & LAYER_BACK) )
color = aBoard->GetVisibleElementColor( PAD_BK_VISIBLE );
if((pad->GetLayerMask() & LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetVisibleElementColor( PAD_FR_VISIBLE ) );
// Temporary set the pad size to the required plot size:
wxSize tmppadsize = pad->GetSize();
pad->SetSize( padPlotsSize );
switch( pad->GetShape() )
{
//.........这里部分代码省略.........
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:101，代码来源:plot_board_layers.cpp
示例7: PlotOneBoardLayer
void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_NUM aLayer,
const PCB_PLOT_PARAMS& aPlotOpt )
{
PCB_PLOT_PARAMS plotOpt = aPlotOpt;
int soldermask_min_thickness = aBoard->GetDesignSettings().m_SolderMaskMinWidth;
// Set a default color and the text mode for this layer
aPlotter->SetColor( aPlotOpt.GetColor() );
aPlotter->SetTextMode( aPlotOpt.GetTextMode() );
// Specify that the contents of the "Edges Pcb" layer are to be plotted
// in addition to the contents of the currently specified layer.
LAYER_MSK layer_mask = GetLayerMask( aLayer );
if( !aPlotOpt.GetExcludeEdgeLayer() )
layer_mask |= EDGE_LAYER;
switch( aLayer )
{
case FIRST_COPPER_LAYER:
case LAYER_N_2:
case LAYER_N_3:
case LAYER_N_4:
case LAYER_N_5:
case LAYER_N_6:
case LAYER_N_7:
case LAYER_N_8:
case LAYER_N_9:
case LAYER_N_10:
case LAYER_N_11:
case LAYER_N_12:
case LAYER_N_13:
case LAYER_N_14:
case LAYER_N_15:
case LAST_COPPER_LAYER:
// Skip NPTH pads on copper layers ( only if hole size == pad size ):
plotOpt.SetSkipPlotNPTH_Pads( true );
// Drill mark will be plotted,
// if drill mark is SMALL_DRILL_SHAPE or FULL_DRILL_SHAPE
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
case SOLDERMASK_N_BACK:
case SOLDERMASK_N_FRONT:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot solder mask:
if( soldermask_min_thickness == 0 )
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotSolderMaskLayer( aBoard, aPlotter, layer_mask, plotOpt,
soldermask_min_thickness );
break;
case SOLDERPASTE_N_BACK:
case SOLDERPASTE_N_FRONT:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
case SILKSCREEN_N_FRONT:
case SILKSCREEN_N_BACK:
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
// Gerber: Subtract soldermask from silkscreen if enabled
if( aPlotter->GetPlotterType() == PLOT_FORMAT_GERBER
&& plotOpt.GetSubtractMaskFromSilk() )
{
if( aLayer == SILKSCREEN_N_FRONT )
layer_mask = GetLayerMask( SOLDERMASK_N_FRONT );
else
layer_mask = GetLayerMask( SOLDERMASK_N_BACK );
// Create the mask to subtract by creating a negative layer polarity
aPlotter->SetLayerPolarity( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot the mask
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
break;
default:
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
break;
}
}
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:92，代码来源:plot_board_layers.cpp
示例8: PlotSolderMaskLayer
/* Plot a solder mask layer.
* Solder mask layers have a minimum thickness value and cannot be drawn like standard layers,
* unless the minimum thickness is 0.
* Currently the algo is:
* 1 - build all pad shapes as polygons with a size inflated by
* mask clearance + (min width solder mask /2)
* 2 - Merge shapes
* 3 - deflate result by (min width solder mask /2)
* 4 - oring result by all pad shapes as polygons with a size inflated by
* mask clearance only (because deflate sometimes creates shape artifacts)
* 5 - draw result as polygons
*
* TODO:
* make this calculation only for shapes with clearance near than (min width solder mask)
* (using DRC algo)
* plot all other shapes by flashing the basing shape
* (shapes will be better, and calculations faster)
*/
void PlotSolderMaskLayer( BOARD *aBoard, PLOTTER* aPlotter,
LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt,
int aMinThickness )
{
LAYER_ID layer = aLayerMask[B_Mask] ? B_Mask : F_Mask;
int inflate = aMinThickness/2;
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerSet( aLayerMask );
// Plot edge layer and graphic items
// They do not have a solder Mask margin, because they are only graphic items
// on this layer (like logos), not actually areas around pads.
itemplotter.PlotBoardGraphicItems();
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( layer != item->GetLayer() )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Build polygons for each pad shape.
// the size of the shape on solder mask should be:
// size of pad + clearance around the pad.
// clearance = solder mask clearance + extra margin
// extra margin is half the min width for solder mask
// This extra margin is used to merge too close shapes
// (distance < aMinThickness), and will be removed when creating
// the actual shapes
SHAPE_POLY_SET areas; // Contains shapes to plot
SHAPE_POLY_SET initialPolys; // Contains exact shapes to plot
/* calculates the coeff to compensate radius reduction of holes clearance
* due to the segment approx ( 1 /cos( PI/circleToSegmentsCount )
*/
int circleToSegmentsCount = 32;
double correction = 1.0 / cos( M_PI / circleToSegmentsCount );
// Plot pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
// add shapes with exact size
module->TransformPadsShapesWithClearanceToPolygon( layer,
initialPolys, 0,
circleToSegmentsCount, correction );
// add shapes inflated by aMinThickness/2
module->TransformPadsShapesWithClearanceToPolygon( layer,
areas, inflate,
circleToSegmentsCount, correction );
}
// Plot vias on solder masks, if aPlotOpt.GetPlotViaOnMaskLayer() is true,
if( aPlotOpt.GetPlotViaOnMaskLayer() )
{
// The current layer is a solder mask,
// use the global mask clearance for vias
int via_clearance = aBoard->GetDesignSettings().m_SolderMaskMargin;
int via_margin = via_clearance + inflate;
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* via = dyn_cast<const VIA*>( track );
if( !via )
continue;
// vias are plotted only if they are on the corresponding
// external copper layer
LSET via_set = via->GetLayerSet();
//.........这里部分代码省略.........
开发者ID:JOE-JOE-NGIGI，项目名称:kicad，代码行数:101，代码来源:plot_board_layers.cpp
示例9: PlotLayerOutlines
/* Plot outlines of copper, for copper layer
*/
void PlotLayerOutlines( BOARD* aBoard, PLOTTER* aPlotter,
LSET aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerSet( aLayerMask );
SHAPE_POLY_SET outlines;
for( LSEQ seq = aLayerMask.Seq( plot_seq, DIM( plot_seq ) ); seq; ++seq )
{
LAYER_ID layer = *seq;
outlines.RemoveAllContours();
aBoard->ConvertBrdLayerToPolygonalContours( layer, outlines );
outlines.Simplify();
// Plot outlines
std::vector< wxPoint > cornerList;
// Now we have one or more basic polygons: plot each polygon
for( int ii = 0; ii < outlines.OutlineCount(); ii++ )
{
for(int kk = 0; kk <= outlines.HoleCount (ii); kk++ )
{
cornerList.clear();
const SHAPE_LINE_CHAIN& path = (kk == 0) ? outlines.COutline( ii ) : outlines.CHole( ii, kk - 1 );
for( int jj = 0; jj < path.PointCount(); jj++ )
cornerList.push_back( wxPoint( path.CPoint( jj ).x , path.CPoint( jj ).y ) );
// Ensure the polygon is closed
if( cornerList[0] != cornerList[cornerList.size() - 1] )
cornerList.push_back( cornerList[0] );
aPlotter->PlotPoly( cornerList, NO_FILL );
}
}
// Plot pad holes
if( aPlotOpt.GetDrillMarksType() != PCB_PLOT_PARAMS::NO_DRILL_SHAPE )
{
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
wxSize hole = pad->GetDrillSize();
if( hole.x == 0 || hole.y == 0 )
continue;
if( hole.x == hole.y )
aPlotter->Circle( pad->GetPosition(), hole.x, NO_FILL );
else
{
wxPoint drl_start, drl_end;
int width;
pad->GetOblongDrillGeometry( drl_start, drl_end, width );
aPlotter->ThickSegment( pad->GetPosition() + drl_start,
pad->GetPosition() + drl_end, width, SKETCH );
}
}
}
}
// Plot vias holes
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* via = dyn_cast<const VIA*>( track );
if( via && via->IsOnLayer( layer ) ) // via holes can be not through holes
{
aPlotter->Circle( via->GetPosition(), via->GetDrillValue(), NO_FILL );
}
}
}
}
开发者ID:JOE-JOE-NGIGI，项目名称:kicad，代码行数:81，代码来源:plot_board_layers.cpp
示例10: PlotOneBoardLayer
void PlotOneBoardLayer( BOARD *aBoard, PLOTTER* aPlotter, LAYER_ID aLayer,
const PCB_PLOT_PARAMS& aPlotOpt )
{
PCB_PLOT_PARAMS plotOpt = aPlotOpt;
int soldermask_min_thickness = aBoard->GetDesignSettings().m_SolderMaskMinWidth;
// Set a default color and the text mode for this layer
aPlotter->SetColor( aPlotOpt.GetColor() );
aPlotter->SetTextMode( aPlotOpt.GetTextMode() );
// Specify that the contents of the "Edges Pcb" layer are to be plotted
// in addition to the contents of the currently specified layer.
LSET layer_mask( aLayer );
if( !aPlotOpt.GetExcludeEdgeLayer() )
layer_mask.set( Edge_Cuts );
if( IsCopperLayer( aLayer ) )
{
// Skip NPTH pads on copper layers ( only if hole size == pad size ):
// Drill mark will be plotted,
// if drill mark is SMALL_DRILL_SHAPE or FULL_DRILL_SHAPE
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
{
plotOpt.SetSkipPlotNPTH_Pads( false );
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
}
else
{
plotOpt.SetSkipPlotNPTH_Pads( true );
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
}
else
{
switch( aLayer )
{
case B_Mask:
case F_Mask:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot solder mask:
if( soldermask_min_thickness == 0 )
{
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
else
PlotSolderMaskLayer( aBoard, aPlotter, layer_mask, plotOpt,
soldermask_min_thickness );
break;
case B_Adhes:
case F_Adhes:
case B_Paste:
case F_Paste:
plotOpt.SetSkipPlotNPTH_Pads( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
break;
case F_SilkS:
case B_SilkS:
if( plotOpt.GetFormat() == PLOT_FORMAT_DXF )
PlotLayerOutlines( aBoard, aPlotter, layer_mask, plotOpt );
else
PlotSilkScreen( aBoard, aPlotter, layer_mask, plotOpt );
// Gerber: Subtract soldermask from silkscreen if enabled
if( aPlotter->GetPlotterType() == PLOT_FORMAT_GERBER
&& plotOpt.GetSubtractMaskFromSilk() )
{
if( aLayer == F_SilkS )
layer_mask = LSET( F_Mask );
else
layer_mask = LSET( B_Mask );
// Create the mask to subtract by creating a negative layer polarity
aPlotter->SetLayerPolarity( false );
// Disable plot pad holes
plotOpt.SetDrillMarksType( PCB_PLOT_PARAMS::NO_DRILL_SHAPE );
// Plot the mask
PlotStandardLayer( aBoard, aPlotter, layer_mask, plotOpt );
}
break;
// These layers are plotted like silk screen layers.
// Mainly, pads on these layers are not filled.
//.........这里部分代码省略.........
开发者ID:JOE-JOE-NGIGI，项目名称:kicad，代码行数:101，代码来源:plot_board_layers.cpp
示例11: PlotLayerOutlines
void PlotLayerOutlines( BOARD *aBoard, PLOTTER* aPlotter,
LAYER_MSK aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
CPOLYGONS_LIST outlines;
for( LAYER_NUM layer = FIRST_LAYER; layer < NB_PCB_LAYERS; layer++ )
{
LAYER_MSK layer_mask = GetLayerMask( layer );
if( (aLayerMask & layer_mask ) == 0 )
continue;
outlines.RemoveAllContours();
aBoard->ConvertBrdLayerToPolygonalContours( layer, outlines );
// Merge all overlapping polygons.
KI_POLYGON_SET kpolygons;
KI_POLYGON_SET ktmp;
outlines.ExportTo( ktmp );
kpolygons += ktmp;
// Plot outlines
std::vector< wxPoint > cornerList;
for( unsigned ii = 0; ii < kpolygons.size(); ii++ )
{
KI_POLYGON polygon = kpolygons[ii];
// polygon contains only one polygon, but it can have holes linked by
// overlapping segments.
// To plot clean outlines, we have to break this polygon into more polygons with
// no overlapping segments, using Clipper, because boost::polygon
// does not allow that
ClipperLib::Path raw_polygon;
ClipperLib::Paths normalized_polygons;
for( unsigned ic = 0; ic < polygon.size(); ic++ )
{
KI_POLY_POINT corner = *(polygon.begin() + ic);
raw_polygon.push_back( ClipperLib::IntPoint( corner.x(), corner.y() ) );
}
ClipperLib::SimplifyPolygon( raw_polygon, normalized_polygons );
// Now we have one or more basic polygons: plot each polygon
for( unsigned ii = 0; ii < normalized_polygons.size(); ii++ )
{
ClipperLib::Path& polygon = normalized_polygons[ii];
cornerList.clear();
for( unsigned jj = 0; jj < polygon.size(); jj++ )
cornerList.push_back( wxPoint( polygon[jj].X , polygon[jj].Y ) );
// Ensure the polygon is closed
if( cornerList[0] != cornerList[cornerList.size()-1] )
cornerList.push_back( cornerList[0] );
aPlotter->PlotPoly( cornerList, NO_FILL );
}
}
// Plot pad holes
if( aPlotOpt.GetDrillMarksType() != PCB_PLOT_PARAMS::NO_DRILL_SHAPE )
{
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
wxSize hole = pad->GetDrillSize();
if( hole.x == 0 || hole.y == 0 )
continue;
if( hole.x == hole.y )
aPlotter->Circle( pad->GetPosition(), hole.x, NO_FILL );
else
{
wxPoint drl_start, drl_end;
int width;
pad->GetOblongDrillGeometry( drl_start, drl_end, width );
aPlotter->ThickSegment( pad->GetPosition() + drl_start,
pad->GetPosition() + drl_end, width, SKETCH );
}
}
}
}
// Plot vias holes
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* via = dyn_cast<const VIA*>( track );
if( via && via->IsOnLayer( layer ) ) // via holes can be not through holes
{
aPlotter->Circle( via->GetPosition(), via->GetDrillValue(), NO_FILL );
//.........这里部分代码省略.........
开发者ID:johnbeard，项目名称:kicad-source-mirror，代码行数:101，代码来源:plot_board_layers.cpp
示例12: OnInitDialog
void DIALOG_GEN_MODULE_POSITION::OnInitDialog( wxInitDialogEvent& event )
{
// Output directory
m_outputDirectoryName->SetValue( m_plotOpts.GetOutputDirectory() );
m_radioBoxUnits->SetSelection( m_unitsOpt );
m_radioBoxFilesCount->SetSelection( m_fileOpt );
m_sdbSizerButtonsOK->SetDefault();
GetSizer()->SetSizeHints(this);
Centre();
}
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:11，代码来源:gen_modules_placefile.cpp
示例13: initDialog
void DIALOG_GEN_MODULE_POSITION::initDialog()
{
m_config = Kiface().KifaceSettings();
m_config->Read( PLACEFILE_UNITS_KEY, &m_unitsOpt, 1 );
m_config->Read( PLACEFILE_OPT_KEY, &m_fileOpt, 0 );
// Output directory
m_outputDirectoryName->SetValue( m_plotOpts.GetOutputDirectory() );
m_radioBoxUnits->SetSelection( m_unitsOpt );
m_radioBoxFilesCount->SetSelection( m_fileOpt );
m_sdbSizerButtonsOK->SetDefault();
}
开发者ID:BTR1，项目名称:kicad-source-mirror，代码行数:13，代码来源:gen_modules_placefile.cpp
示例14: OnOKButton
void DIALOG_GEN_MODULE_POSITION::OnOKButton( wxCommandEvent& event )
{
m_unitsOpt = m_radioBoxUnits->GetSelection();
m_fileOpt = m_radioBoxFilesCount->GetSelection();
// Set output directory and replace backslashes with forward ones
// (Keep unix convention in cfg files)
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
m_plotOpts.SetOutputDirectory( dirStr );
m_parent->SetPlotSettings( m_plotOpts );
CreateFiles();
}
开发者ID:ianohara，项目名称:kicad-source-mirror，代码行数:17，代码来源:gen_modules_placefile.cpp
示例15: OnOKButton
void DIALOG_GEN_MODULE_POSITION::OnOKButton( wxCommandEvent& event )
{
m_unitsOpt = m_radioBoxUnits->GetSelection();
m_fileOpt = m_radioBoxFilesCount->GetSelection();
m_fileFormat = m_rbFormat->GetSelection();
m_config->Write( PLACEFILE_UNITS_KEY, m_unitsOpt );
m_config->Write( PLACEFILE_OPT_KEY, m_fileOpt );
m_config->Write( PLACEFILE_FORMAT_KEY, m_fileFormat );
// Set output directory and replace backslashes with forward ones
// (Keep unix convention in cfg files)
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
m_plotOpts.SetOutputDirectory( dirStr );
m_parent->SetPlotSettings( m_plotOpts );
CreateFiles();
// the dialog is not closed here.
}
开发者ID:RyuKojiro，项目名称:kicad-source-mirror，代码行数:24，代码来源:gen_modules_placefile.cpp
|
客服电话
APP下载
官方微信
请发表评论