本文整理汇总了C++中ThermalZone类的典型用法代码示例。如果您正苦于以下问题：C++ ThermalZone类的具体用法？C++ ThermalZone怎么用？C++ ThermalZone使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了ThermalZone类的16个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: ModelObject
ZoneHVACEquipmentList::ZoneHVACEquipmentList(const ThermalZone & thermalZone)
: ModelObject(ZoneHVACEquipmentList::iddObjectType(),thermalZone.model())
{
OS_ASSERT(getImpl<detail::ZoneHVACEquipmentList_Impl>());
setPointer(OS_ZoneHVAC_EquipmentListFields::ThermalZone,thermalZone.handle());
}
开发者ID:CUEBoxer，项目名称:OpenStudio，代码行数:7，代码来源:ZoneHVACEquipmentList.cpp
示例2: setSourceZone
bool ZoneMixing_Impl::setSourceZone(const ThermalZone& zone) {
bool result(false);
// source zone cannot be the same as this zone
if (zone.handle() != this->zone().handle()){
result = setPointer(OS_ZoneMixingFields::SourceZoneName, zone.handle());
}
return result;
}
开发者ID:MatthewSteen，项目名称:OpenStudio，代码行数:9，代码来源:ZoneMixing.cpp
示例3: TEST_F
TEST_F(ModelFixture, AirflowNetwork_Zone_Basic)
{
Model model;
ThermalZone thermalZone(model);
Space space1(model);
Space space2(model);
EXPECT_FALSE(thermalZone.airflowNetworkZone());
EXPECT_FALSE(space1.thermalZone());
EXPECT_FALSE(space2.thermalZone());
EXPECT_EQ(0u, thermalZone.spaces().size());
EXPECT_TRUE(space1.setThermalZone(thermalZone));
ASSERT_TRUE(space1.thermalZone());
EXPECT_EQ(thermalZone.handle(), space1.thermalZone()->handle());
EXPECT_FALSE(space2.thermalZone());
EXPECT_EQ(1u, thermalZone.spaces().size());
ASSERT_TRUE(space1.thermalZone());
EXPECT_EQ(thermalZone.handle(), space1.thermalZone()->handle());
EXPECT_TRUE(space2.setThermalZone(thermalZone));
ASSERT_TRUE(space2.thermalZone());
EXPECT_EQ(thermalZone.handle(), space2.thermalZone()->handle());
EXPECT_EQ(2u, thermalZone.spaces().size());
auto zone = thermalZone.getAirflowNetworkZone();
auto optzone = thermalZone.airflowNetworkZone();
ASSERT_TRUE(optzone);
EXPECT_EQ(zone, optzone.get());
zone.setFacadeWidth(50.0);
CurveLinear curve(model);
curve.setCoefficient1Constant(55.0);
curve.setCoefficient2x(0.0);
AirflowNetworkOccupantVentilationControl ovc(model, curve);
EXPECT_FALSE(zone.occupantVentilationControl());
EXPECT_TRUE(zone.setOccupantVentilationControl(ovc));
ASSERT_TRUE(zone.occupantVentilationControl());
EXPECT_EQ(ovc, zone.occupantVentilationControl().get());
ThermalZone thermalZoneClone = thermalZone.clone(model).cast<ThermalZone>();
optzone = thermalZoneClone.airflowNetworkZone();
ASSERT_TRUE(optzone);
EXPECT_NE(zone, optzone.get());
EXPECT_EQ(50.0, optzone.get().facadeWidth());
ASSERT_TRUE(optzone.get().occupantVentilationControl());
EXPECT_EQ(ovc, optzone.get().occupantVentilationControl().get());
}
开发者ID:NREL，项目名称:OpenStudio，代码行数:50，代码来源:AirflowNetworkZone_GTest.cpp
示例4: ModelObject
ZoneMixing::ZoneMixing(const ThermalZone& zone)
: ModelObject(ZoneMixing::iddObjectType(), zone.model())
{
OS_ASSERT(getImpl<detail::ZoneMixing_Impl>());
bool ok = setPointer(OS_ZoneMixingFields::ZoneName, zone.handle());
OS_ASSERT(ok);
ok = setPointer(OS_ZoneMixingFields::ScheduleName, zone.model().alwaysOnContinuousSchedule().handle());
OS_ASSERT(ok);
ok = setDesignFlowRate(0.0);
OS_ASSERT(ok);
}
开发者ID:MatthewSteen，项目名称:OpenStudio，代码行数:14，代码来源:ZoneMixing.cpp
示例5: removeFromThermalZone
bool RefrigerationAirChiller_Impl::addToThermalZone(ThermalZone & thermalZone)
{
Model m = this->model();
if( thermalZone.model() != m )
{
return false;
}
removeFromThermalZone();
thermalZone.setUseIdealAirLoads(false);
thermalZone.addEquipment(this->getObject<ZoneHVACComponent>());
return true;
}
开发者ID:jtanaa，项目名称:OpenStudio，代码行数:15，代码来源:RefrigerationAirChiller.cpp
示例6: removeFromThermalZone
bool ZoneHVACBaseboardConvectiveElectric_Impl::addToThermalZone(ThermalZone & thermalZone)
{
Model m = this->model();
if( thermalZone.model() != m )
{
return false;
}
if( thermalZone.isPlenum() )
{
return false;
}
removeFromThermalZone();
thermalZone.setUseIdealAirLoads(false);
thermalZone.addEquipment(this->getObject<ZoneHVACComponent>());
return true;
}
开发者ID:pepsi7959，项目名称:OpenStudio，代码行数:22，代码来源:ZoneHVACBaseboardConvectiveElectric.cpp
示例7: removeFromThermalZone
//reimplemented to override the base-class method in ZoneHVACComponent
//because this component doesn't get attached to the zone inlet and zone outlet nodes
bool ZoneHVACLowTempRadiantVarFlow_Impl::addToThermalZone(ThermalZone & thermalZone)
{
Model m = this->model();
if( thermalZone.model() != m )
{
return false;
}
if( thermalZone.isPlenum() )
{
return false;
}
removeFromThermalZone();
thermalZone.setUseIdealAirLoads(false);
thermalZone.addEquipment(this->getObject<ZoneHVACComponent>());
return true;
}
开发者ID:pepsi7959，项目名称:OpenStudio，代码行数:24，代码来源:ZoneHVACLowTempRadiantVarFlow.cpp
示例8: removeFromThermalZone
bool FanZoneExhaust_Impl::addToThermalZone(ThermalZone & thermalZone)
{
Model m = this->model();
if( thermalZone.model() != m )
{
return false;
}
removeFromThermalZone();
thermalZone.setUseIdealAirLoads(false);
// Zone Exhaust Node (Exhaust Fan Inlet node)
Node exhaustNode(m);
PortList exhaustPortList = thermalZone.exhaustPortList();
unsigned nextPort = exhaustPortList.nextPort();
m.connect(exhaustPortList,nextPort,exhaustNode,exhaustNode.inletPort());
ModelObject mo = this->getObject<ModelObject>();
m.connect(exhaustNode,exhaustNode.outletPort(),mo,this->inletPort());
// Node (Exhaust Fan Outlet Node)
Node exhaustFanOutletNode(m);
m.connect(mo,this->outletPort(),exhaustFanOutletNode,exhaustFanOutletNode.inletPort());
thermalZone.addEquipment(this->getObject<ZoneHVACComponent>());
return true;
}
开发者ID:CUEBoxer，项目名称:OpenStudio，代码行数:37，代码来源:FanZoneExhaust.cpp
示例9: secondaryAirInletNode
bool AirTerminalSingleDuctParallelPIUReheat_Impl::setInducedAirPlenumZone(ThermalZone & plenumZone)
{
bool result = true;
if( ! plenumZone.isPlenum() )
{
result = false;
}
boost::optional<Node> t_secondaryAirInletNode;
if( result )
{
t_secondaryAirInletNode = secondaryAirInletNode();
if( ! t_secondaryAirInletNode )
{
result = false;
}
}
boost::optional<AirLoopHVACReturnPlenum> plenum;
if( result )
{
plenum = plenumZone.getImpl<detail::ThermalZone_Impl>()->airLoopHVACReturnPlenum();
if( ! plenum )
{
result = false;
}
}
if( result )
{
Model t_model = model();
PortList pl = plenum->getImpl<detail::AirLoopHVACReturnPlenum_Impl>()->inducedAirOutletPortList();
t_model.connect(pl,pl.nextPort(),t_secondaryAirInletNode.get(),t_secondaryAirInletNode->inletPort());
}
return result;
}
开发者ID:jtanaa，项目名称:OpenStudio，代码行数:38，代码来源:AirTerminalSingleDuctParallelPIUReheat.cpp
示例10: removeFromThermalZone
bool ZoneHVACComponent_Impl::addToThermalZone(ThermalZone & thermalZone)
{
Model m = this->model();
if( thermalZone.model() != m ) {
return false;
}
if( thermalZone.isPlenum() ) {
return false;
}
removeFromThermalZone();
thermalZone.setUseIdealAirLoads(false);
// Connect nodes if this is an air based zone hvac component
if( inletPort() != 0u && outletPort() != 0u ) {
// Exhaust Node
Node exhaustNode(m);
PortList exhaustPortList = thermalZone.exhaustPortList();
unsigned nextPort = exhaustPortList.nextPort();
m.connect(exhaustPortList,nextPort,exhaustNode,exhaustNode.inletPort());
ModelObject mo = this->getObject<ModelObject>();
m.connect(exhaustNode,exhaustNode.outletPort(),mo,this->inletPort());
// Air Inlet Node
Node airInletNode(m);
PortList inletPortList = thermalZone.inletPortList();
unsigned nextInletPort = inletPortList.nextPort();
m.connect(airInletNode,airInletNode.outletPort(),inletPortList,nextInletPort);
m.connect(mo,this->outletPort(),airInletNode,airInletNode.inletPort());
}
thermalZone.addEquipment(this->getObject<ZoneHVACComponent>());
return true;
}
开发者ID:Anto-F，项目名称:OpenStudio，代码行数:38，代码来源:ZoneHVACComponent.cpp
示例11: setControlledZone
bool ZoneControlContaminantController_Impl::setControlledZone(ThermalZone& zone) {
return setPointer(OS_ZoneControl_ContaminantControllerFields::ControlledZoneName,zone.handle());
}
开发者ID:Anto-F，项目名称:OpenStudio，代码行数:3，代码来源:ZoneControlContaminantController.cpp
示例12: setControlZone
void SetpointManagerSingleZoneReheat_Impl::setControlZone(ThermalZone & thermalZone)
{
SetpointManagerSingleZoneReheat thisModelObject = this->getObject<SetpointManagerSingleZoneReheat>();
thisModelObject.setPointer(OS_SetpointManager_SingleZone_ReheatFields::ControlZoneName,thermalZone.handle());
}
开发者ID:ChengXinDL，项目名称:OpenStudio，代码行数:6，代码来源:SetpointManagerSingleZoneReheat.cpp
示例13: createRegisterAndNameIdfObject
boost::optional<IdfObject> ForwardTranslator::translateZoneMixing( ZoneMixing & modelObject )
{
// Makes sure the modelObject gets put in the map, and that the new idfObject gets put in
// the final file. Also set's the idfObject's name.
IdfObject idfObject = createRegisterAndNameIdfObject(IddObjectType::ZoneMixing, modelObject);
boost::optional<double> value;
// ZoneName
ThermalZone zone = modelObject.zone();
translateAndMapModelObject(zone);
idfObject.setString(ZoneMixingFields::ZoneName, zone.name().get());
// ScheduleName
Schedule schedule = modelObject.schedule();
translateAndMapModelObject(schedule);
idfObject.setString(ZoneMixingFields::ScheduleName, schedule.name().get());
// DesignFlowRateCalculationMethod
idfObject.setString(ZoneMixingFields::DesignFlowRateCalculationMethod, modelObject.designFlowRateCalculationMethod());
// DesignFlowRate
value = modelObject.designFlowRate();
if (value){
idfObject.setDouble(ZoneMixingFields::DesignFlowRate, *value);
}
// FlowRateperZoneFloorArea
value = modelObject.flowRateperZoneFloorArea();
if (value){
idfObject.setDouble(ZoneMixingFields::FlowRateperZoneFloorArea, *value);
}
// FlowRateperPerson
value = modelObject.flowRateperPerson();
if (value){
idfObject.setDouble(ZoneMixingFields::FlowRateperPerson, *value);
}
// AirChangesperHour
value = modelObject.airChangesperHour();
if (value){
idfObject.setDouble(ZoneMixingFields::AirChangesperHour, *value);
}
// SourceZone
boost::optional<ThermalZone> sourceZone = modelObject.sourceZone();
if (sourceZone){
// DLM: do not translate source zone now, it will be translated at the right time
idfObject.setString(ZoneMixingFields::SourceZoneName, sourceZone->name().get());
}
// DeltaTemperature
value = modelObject.deltaTemperature();
if (value){
idfObject.setDouble(ZoneMixingFields::DeltaTemperature, *value);
}
// DeltaTemperatureScheduleName
boost::optional<Schedule> optSchedule = modelObject.deltaTemperatureSchedule();
if (optSchedule){
translateAndMapModelObject(*optSchedule);
idfObject.setString(ZoneMixingFields::DeltaTemperatureScheduleName, optSchedule->name().get());
}
// MinimumZoneTemperatureScheduleName
optSchedule = modelObject.minimumZoneTemperatureSchedule();
if (optSchedule){
translateAndMapModelObject(*optSchedule);
idfObject.setString(ZoneMixingFields::MinimumZoneTemperatureScheduleName, optSchedule->name().get());
}
// MaximumZoneTemperatureScheduleName
optSchedule = modelObject.maximumZoneTemperatureSchedule();
if (optSchedule){
translateAndMapModelObject(*optSchedule);
idfObject.setString(ZoneMixingFields::MaximumZoneTemperatureScheduleName, optSchedule->name().get());
}
// MinimumSourceZoneTemperatureScheduleName
optSchedule = modelObject.minimumSourceZoneTemperatureSchedule();
if (optSchedule){
translateAndMapModelObject(*optSchedule);
idfObject.setString(ZoneMixingFields::MinimumSourceZoneTemperatureScheduleName, optSchedule->name().get());
}
// MaximumSourceZoneTemperatureScheduleName
optSchedule = modelObject.maximumSourceZoneTemperatureSchedule();
if (optSchedule){
translateAndMapModelObject(*optSchedule);
idfObject.setString(ZoneMixingFields::MaximumSourceZoneTemperatureScheduleName, optSchedule->name().get());
}
// MinimumOutdoorTemperatureScheduleName
optSchedule = modelObject.minimumOutdoorTemperatureSchedule();
if (optSchedule){
translateAndMapModelObject(*optSchedule);
idfObject.setString(ZoneMixingFields::MinimumOutdoorTemperatureScheduleName, optSchedule->name().get());
}
//.........这里部分代码省略.........
开发者ID:MatthewSteen，项目名称:OpenStudio，代码行数:101，代码来源:ForwardTranslateZoneMixing.cpp
示例14: setThermalZone
bool ElectricLoadCenterInverterSimple_Impl::setThermalZone(const ThermalZone& thermalZone) {
return setPointer(OS_ElectricLoadCenter_Inverter_SimpleFields::ZoneName, thermalZone.handle());
}
开发者ID:NREL，项目名称:OpenStudio，代码行数:3，代码来源:ElectricLoadCenterInverterSimple.cpp
示例15: setControlZone
bool SetpointManagerSingleZoneHumidityMaximum_Impl::setControlZone(const ThermalZone& thermalZone) {
bool result = setPointer(OS_SetpointManager_SingleZone_Humidity_MaximumFields::ControlZoneName, thermalZone.handle());
return result;
}
开发者ID:NREL，项目名称:OpenStudio，代码行数:4，代码来源:SetpointManagerSingleZoneHumidityMaximum.cpp
示例16: setThermalZone
bool RefrigerationWalkInZoneBoundary_Impl::setThermalZone(const ThermalZone& thermalZone) {
bool result = setPointer(OS_Refrigeration_WalkIn_ZoneBoundaryFields::ZoneName, thermalZone.handle());
return result;
}
开发者ID:Anto-F，项目名称:OpenStudio，代码行数:4，代码来源:RefrigerationWalkInZoneBoundary.cpp
注：本文中的ThermalZone类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论