C++ ToolManager类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ToolManager类的典型用法代码示例。如果您正苦于以下问题：C++ ToolManager类的具体用法？C++ ToolManager怎么用？C++ ToolManager使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了ToolManager类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: switch

	//---------------------------------------------------------------------------
	void WorldViewWindowManager::notifyMessageBoxChoice(MessageBoxButton _button)
	{
		switch(_button)
		{
			case MessageBoxButton::CANCEL:
			{
				cancelWindowClosing();
				break;
			}
			case MessageBoxButton::BUTTON1: // Save
			{
				if(!mSaveWorldTool)
				{
					ToolManager* toolMgr = ToolManagerList::getSingleton().getToolManager("EditorToolManager");
					mSaveWorldTool = toolMgr->getTool("SaveWorld");
				}
				if(mSaveWorldTool)
				{
					mSaveWorldTool->activateTool();
					registerFrameListener();
				}
				break;
			}
			case MessageBoxButton::BUTTON2: // Don't save
			{
				WorldManager::getSingleton().destroyWorld(getActiveWindow()->getWorld());
				_processWindowClosing();
				break;
			}
		}
	}

开发者ID:raduetsya，项目名称:GothOgre，代码行数:32，代码来源:WorldViewWindowManager.cpp

示例2: valuatorThreshold

ValuatorTurnNavigationToolFactory::ValuatorTurnNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("ValuatorTurnNavigationTool",toolManager),
	 valuatorThreshold(0.25),
	 flyDirection(Vector(0,1,0)),
	 flyFactor(getDisplaySize()*Scalar(0.5)),
	 rotationAxis0(Vector(0,0,1)),
	 rotationAxis1(Vector(1,0,0)),
	 rotationCenter(Point::origin),
	 rotationFactor(Scalar(90))
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1);
	layout.setNumValuators(2);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	valuatorThreshold=cfs.retrieveValue<Scalar>("./valuatorThreshold",valuatorThreshold);
	flyDirection=cfs.retrieveValue<Vector>("./flyDirection",flyDirection);
	flyDirection.normalize();
	flyFactor=cfs.retrieveValue<Scalar>("./flyFactor",flyFactor);
	rotationAxis0=cfs.retrieveValue<Vector>("./rotationAxis0",rotationAxis0);
	rotationAxis0.normalize();
	rotationAxis1=cfs.retrieveValue<Vector>("./rotationAxis1",rotationAxis1);
	rotationAxis1.normalize();
	rotationCenter=cfs.retrieveValue<Point>("./rotationCenter",rotationCenter);
	rotationFactor=Math::rad(cfs.retrieveValue<Scalar>("./rotationFactor",rotationFactor));
	
	/* Set tool class' factory pointer: */
	ValuatorTurnNavigationTool::factory=this;
	}

开发者ID:Doc-Ok，项目名称:OpticalTracking，代码行数:35，代码来源:ValuatorTurnNavigationTool.cpp

示例3:

ButtonInputDeviceToolFactory::ButtonInputDeviceToolFactory(ToolManager& toolManager)
	:ToolFactory("ButtonInputDeviceTool",toolManager)
	{
	/* Initialize tool layout: */
	layout.setNumButtons(8,true);
	layout.setNumValuators(0,true);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	
	/* Insert class into class hierarchy: */
	ToolFactory* inputDeviceToolFactory=toolManager.loadClass("InputDeviceTool");
	inputDeviceToolFactory->addChildClass(this);
	addParentClass(inputDeviceToolFactory);
	
	/* Initialize translation and rotation vectors: */
	Scalar translateFactor=cfs.retrieveValue<Scalar>("./translateFactor",Scalar(4)*getInchFactor());
	Scalar rotateFactor=Math::rad(cfs.retrieveValue<Scalar>("./rotateFactor",Scalar(60)));
	for(int i=0;i<6;++i)
		translations[i]=Vector::zero;
	for(int i=0;i<3;++i)
		{
		translations[2*i+0][i]=-translateFactor;
		translations[2*i+1][i]=translateFactor;
		}
	rotations[0]=Vector(0,0,-rotateFactor);
	rotations[1]=Vector(0,0,rotateFactor);
	rotations[2]=Vector(0,-rotateFactor,0);
	rotations[3]=Vector(0,rotateFactor,0);
	rotations[4]=Vector(rotateFactor,0,0);
	rotations[5]=Vector(-rotateFactor,0,0);
	
	/* Set tool class' factory pointer: */
	ButtonInputDeviceTool::factory=this;
	}

开发者ID:Doc-Ok，项目名称:OpticalTracking，代码行数:35，代码来源:ButtonInputDeviceTool.cpp

示例4: valuatorThreshold

ValuatorFlyNavigationToolFactory::ValuatorFlyNavigationToolFactory(ToolManager& toolManager)
    :ToolFactory("ValuatorFlyNavigationTool",toolManager),
     valuatorThreshold(0),
     flyDirection(Vector(0,1,0)),
     flyFactor(getDisplaySize()*Scalar(0.5))
{
    /* Initialize tool layout: */
    layout.setNumDevices(1);
    layout.setNumValuators(0,1);

    /* Insert class into class hierarchy: */
    ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
    navigationToolFactory->addChildClass(this);
    addParentClass(navigationToolFactory);

    /* Load class settings: */
    Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
    valuatorThreshold=cfs.retrieveValue<Scalar>("./valuatorThreshold",valuatorThreshold);
    flyDirection=cfs.retrieveValue<Vector>("./flyDirection",flyDirection);
    flyDirection.normalize();
    flyFactor=cfs.retrieveValue<Scalar>("./flyFactor",flyFactor);

    /* Set tool class' factory pointer: */
    ValuatorFlyNavigationTool::factory=this;
}

开发者ID:jrevote，项目名称:3DA-Vrui，代码行数:25，代码来源:ValuatorFlyNavigationTool.cpp

示例5: lightsaberLength

JediToolFactory::JediToolFactory(ToolManager& toolManager)
	:ToolFactory("JediTool",toolManager),
	 lightsaberLength(Scalar(48)*getInchFactor()),
	 lightsaberWidth(Scalar(6)*getInchFactor()),
	 baseOffset(Scalar(3)*getInchFactor()),
	 lightsaberImageFileName(std::string(VRUI_INTERNAL_CONFIG_SHAREDIR)+"/Textures/Lightsaber.png")
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* toolFactory=toolManager.loadClass("PointingTool");
	toolFactory->addChildClass(this);
	addParentClass(toolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	lightsaberLength=cfs.retrieveValue<Scalar>("./lightsaberLength",lightsaberLength);
	lightsaberWidth=cfs.retrieveValue<Scalar>("./lightsaberWidth",lightsaberWidth);
	baseOffset=cfs.retrieveValue<Scalar>("./baseOffset",baseOffset);
	lightsaberImageFileName=cfs.retrieveString("./lightsaberImageFileName",lightsaberImageFileName);
	
	/* Set tool class' factory pointer: */
	JediTool::factory=this;
	}

开发者ID:KeckCAVES，项目名称:Vrui，代码行数:25，代码来源:JediTool.cpp

示例6: scaleDeviceDistance

SixDofWithScaleNavigationToolFactory::SixDofWithScaleNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("SixDofWithScaleNavigationTool",toolManager),
	 scaleDeviceDistance(getInchFactor()*Scalar(6)),
	 deviceScaleDirection(0,1,0),
	 scaleFactor(getInchFactor()*Scalar(12))
	{
	/* Initialize tool layout: */
	layout.setNumDevices(2);
	layout.setNumButtons(0,1);
	layout.setNumButtons(1,0);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	scaleDeviceDistance=cfs.retrieveValue<Scalar>("./scaleDeviceDistance",scaleDeviceDistance);
	scaleDeviceDistance2=scaleDeviceDistance*scaleDeviceDistance;
	deviceScaleDirection=cfs.retrieveValue<Vector>("./deviceScaleDirection",deviceScaleDirection);
	scaleFactor=cfs.retrieveValue<Scalar>("./scaleFactor",scaleFactor);
	
	/* Set tool class' factory pointer: */
	SixDofWithScaleNavigationTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui，代码行数:26，代码来源:SixDofWithScaleNavigationTool.cpp

示例7: rotatePlaneOffset

MouseDialogNavigationToolFactory::MouseDialogNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("MouseDialogNavigationTool",toolManager),
	 rotatePlaneOffset(getInchFactor()*Scalar(3)),
	 rotateFactor(getInchFactor()*Scalar(3)),
	 screenDollyingDirection(0,-1,0),
	 screenScalingDirection(0,-1,0),
	 dollyFactor(Scalar(1)),
	 scaleFactor(getInchFactor()*Scalar(3)),
	 spinThreshold(getUiSize()*Scalar(2)),
	 interactWithWidgets(true)
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	rotatePlaneOffset=cfs.retrieveValue<Scalar>("./rotatePlaneOffset",rotatePlaneOffset);
	rotateFactor=cfs.retrieveValue<Scalar>("./rotateFactor",rotateFactor);
	screenDollyingDirection=cfs.retrieveValue<Vector>("./screenDollyingDirection",screenDollyingDirection);
	screenScalingDirection=cfs.retrieveValue<Vector>("./screenScalingDirection",screenScalingDirection);
	dollyFactor=cfs.retrieveValue<Scalar>("./dollyFactor",dollyFactor);
	scaleFactor=cfs.retrieveValue<Scalar>("./scaleFactor",scaleFactor);
	spinThreshold=cfs.retrieveValue<Scalar>("./spinThreshold",spinThreshold);
	interactWithWidgets=cfs.retrieveValue<bool>("./interactWithWidgets",interactWithWidgets);
	
	/* Set tool class' factory pointer: */
	MouseDialogNavigationTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui-2.2-003，代码行数:33，代码来源:MouseDialogNavigationTool.cpp

示例8: linearSnapThreshold

ComeHitherNavigationToolFactory::ComeHitherNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("ComeHitherNavigationTool",toolManager),
	 linearSnapThreshold(getDisplaySize()*Scalar(0.5)),
	 angularSnapThreshold(Scalar(45)),
	 maxLinearVelocity(getDisplaySize()*Scalar(1.5)),
	 maxAngularVelocity(Scalar(90.0))
	{
	/* Initialize tool layout: */
	layout.setNumDevices(1);
	layout.setNumButtons(0,1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	linearSnapThreshold=cfs.retrieveValue<Scalar>("./linearSnapThreshold",linearSnapThreshold);
	angularSnapThreshold=Math::rad(cfs.retrieveValue<Scalar>("./angularSnapThreshold",angularSnapThreshold));
	maxLinearVelocity=cfs.retrieveValue<Scalar>("./maxLinearVelocity",maxLinearVelocity);
	maxAngularVelocity=Math::rad(cfs.retrieveValue<Scalar>("./maxAngularVelocity",maxAngularVelocity));
	
	/* Set tool class' factory pointer: */
	ComeHitherNavigationTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui，代码行数:26，代码来源:ComeHitherNavigationTool.cpp

示例9: rotatePlaneOffset

MouseNavigationToolFactory::MouseNavigationToolFactory(ToolManager& toolManager)
    :ToolFactory("MouseNavigationTool",toolManager),
     rotatePlaneOffset(getInchFactor()*Scalar(12)),
     rotateFactor(getInchFactor()*Scalar(12)),
     invertDolly(false),
     screenDollyingDirection(0,1,0),
     screenScalingDirection(0,1,0),
     dollyFactor(getInchFactor()*Scalar(12)),
     scaleFactor(getInchFactor()*Scalar(12)),
     wheelDollyFactor(getInchFactor()*Scalar(-12)),
     wheelScaleFactor(Scalar(0.5)),
     spinThreshold(Scalar(0)),
     showScreenCenter(false),
     interactWithWidgets(true),
     showMouseCursor(false),
     mouseCursorSize(Scalar(0.5),Scalar(0.5),Scalar(0.0)),
     mouseCursorHotspot(Scalar(0.0),Scalar(1.0),Scalar(0.0)),
     mouseCursorImageFileName(DEFAULTMOUSECURSORIMAGEFILENAME),
     mouseCursorNominalSize(24)
{
    /* Initialize tool layout: */
    layout.setNumDevices(1);
    layout.setNumButtons(0,3);
    layout.setNumValuators(0,1);

    /* Insert class into class hierarchy: */
    ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
    navigationToolFactory->addChildClass(this);
    addParentClass(navigationToolFactory);

    /* Load class settings: */
    Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
    rotatePlaneOffset=cfs.retrieveValue<Scalar>("./rotatePlaneOffset",rotatePlaneOffset);
    rotateFactor=cfs.retrieveValue<Scalar>("./rotateFactor",rotateFactor);
    invertDolly=cfs.retrieveValue<bool>("./invertDolly",invertDolly);
    screenDollyingDirection=cfs.retrieveValue<Vector>("./screenDollyingDirection",screenDollyingDirection);
    screenScalingDirection=cfs.retrieveValue<Vector>("./screenScalingDirection",screenScalingDirection);
    dollyFactor=cfs.retrieveValue<Scalar>("./dollyFactor",dollyFactor);
    scaleFactor=cfs.retrieveValue<Scalar>("./scaleFactor",scaleFactor);
    wheelDollyFactor=cfs.retrieveValue<Scalar>("./wheelDollyFactor",wheelDollyFactor);
    wheelScaleFactor=cfs.retrieveValue<Scalar>("./wheelScaleFactor",wheelScaleFactor);
    spinThreshold=cfs.retrieveValue<Scalar>("./spinThreshold",spinThreshold);
    showScreenCenter=cfs.retrieveValue<bool>("./showScreenCenter",showScreenCenter);
    interactWithWidgets=cfs.retrieveValue<bool>("./interactWithWidgets",interactWithWidgets);
    showMouseCursor=cfs.retrieveValue<bool>("./showMouseCursor",showMouseCursor);
    mouseCursorSize=cfs.retrieveValue<Size>("./mouseCursorSize",mouseCursorSize);
    mouseCursorHotspot=cfs.retrieveValue<Vector>("./mouseCursorHotspot",mouseCursorHotspot);
    mouseCursorImageFileName=cfs.retrieveString("./mouseCursorImageFileName",mouseCursorImageFileName);
    mouseCursorNominalSize=cfs.retrieveValue<unsigned int>("./mouseCursorNominalSize",mouseCursorNominalSize);

    /* Set tool class' factory pointer: */
    MouseNavigationTool::factory=this;
}

开发者ID:jrevote，项目名称:3DA-Vrui，代码行数:53，代码来源:MouseNavigationTool.cpp

示例10:

MenuToolFactory::MenuToolFactory(ToolManager& toolManager)
	:ToolFactory("MenuTool",toolManager)
	{
	/* Insert class into class hierarchy: */
	ToolFactory* toolFactory=toolManager.loadClass("UserInterfaceTool");
	toolFactory->addChildClass(this);
	addParentClass(toolFactory);
	}

开发者ID:VisualIdeation，项目名称:Vrui，代码行数:8，代码来源:MenuTool.cpp

示例11: canRoll

SixAxisSurfaceNavigationToolFactory::SixAxisSurfaceNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("SixAxisSurfaceNavigationTool",toolManager),
	 canRoll(true),
	 bankTurns(false),levelSpeed(5),
	 canFly(true),
	 probeSize(getDisplaySize()),
	 maxClimb(getDisplaySize()),
	 fixAzimuth(false),
	 drawHud(true),hudColor(0.0f,1.0f,0.0f),hudRadius(float(getFrontplaneDist()*1.25f)),hudFontSize(float(getUiSize())*1.5f)
	{
	/* Initialize tool layout: */
	layout.setNumValuators(6);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	Vector trans;
	for(int i=0;i<3;++i)
		trans[i]=getDisplaySize();
	trans=cfs.retrieveValue<Vector>("./translateFactors",trans);
	for(int i=0;i<3;++i)
		translateFactors[i]=trans[i];
	Vector rot=cfs.retrieveValue<Vector>("./rotateFactors",Vector(180,180,180));
	for(int i=0;i<3;++i)
		rotateFactors[i]=Math::rad(rot[i]);
	canRoll=cfs.retrieveValue<bool>("./canRoll",canRoll);
	bankTurns=cfs.retrieveValue<bool>("./bankTurns",bankTurns);
	levelSpeed=cfs.retrieveValue<Scalar>("./levelSpeed",levelSpeed);
	if(levelSpeed<Scalar(0))
		levelSpeed=Scalar(0);
	canFly=cfs.retrieveValue<bool>("./canFly",canFly);
	probeSize=cfs.retrieveValue<Scalar>("./probeSize",probeSize);
	maxClimb=cfs.retrieveValue<Scalar>("./maxClimb",maxClimb);
	fixAzimuth=cfs.retrieveValue<bool>("./fixAzimuth",fixAzimuth);
	drawHud=cfs.retrieveValue<bool>("./drawHud",drawHud);
	hudColor=cfs.retrieveValue<Color>("./hudColor",hudColor);
	hudRadius=cfs.retrieveValue<float>("./hudRadius",hudRadius);
	hudFontSize=cfs.retrieveValue<float>("./hudFontSize",hudFontSize);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("SurfaceNavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Set tool class' factory pointer: */
	SixAxisSurfaceNavigationTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui-2.2-003，代码行数:46，代码来源:SixAxisSurfaceNavigationTool.cpp

示例12:

MultiDeviceNavigationToolFactory::MultiDeviceNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("MultiDeviceNavigationTool",toolManager)
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1,true);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	configuration.read(cfs);
	
	/* Set tool class' factory pointer: */
	MultiDeviceNavigationTool::factory=this;
	}

开发者ID:KeckCAVES，项目名称:Vrui，代码行数:18，代码来源:MultiDeviceNavigationTool.cpp

示例13: addParentClass

SixAxisTransformToolFactory::SixAxisTransformToolFactory(ToolManager& toolManager)
    :ToolFactory("SixAxisTransformTool",toolManager)
{
    /* Initialize tool layout: */
    layout.setNumButtons(1,true);
    layout.setNumValuators(6,true);

    /* Insert class into class hierarchy: */
    ToolFactory* transformToolFactory=toolManager.loadClass("TransformTool");
    transformToolFactory->addChildClass(this);
    addParentClass(transformToolFactory);

    /* Load class settings: */
    config.load(toolManager.getToolClassSection(getClassName()));

    /* Set tool class' factory pointer: */
    SixAxisTransformTool::factory=this;
}

开发者ID:soimy，项目名称:OpticalTracking，代码行数:18，代码来源:SixAxisTransformTool.cpp

示例14: cfs

SixAxisNavigationToolFactory::SixAxisNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("SixAxisNavigationTool",toolManager)
	{
	/* Initialize tool layout: */
	layout.setNumValuators(7);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs(toolManager.getToolClassSection(getClassName()));
	config.load(cfs);
	
	/* Set tool class' factory pointer: */
	SixAxisNavigationTool::factory=this;
	}

开发者ID:Doc-Ok，项目名称:OpticalTracking，代码行数:18，代码来源:SixAxisNavigationTool.cpp

示例15: floorPlane

WalkNavigationToolFactory::WalkNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("WalkNavigationTool",toolManager),
	 floorPlane(getFloorPlane()),
	 centerOnActivation(false),
	 centerPoint(getDisplayCenter()),
	 moveSpeed(getDisplaySize()),
	 innerRadius(getDisplaySize()*Scalar(0.5)),outerRadius(getDisplaySize()*Scalar(0.75)),
	 centerViewDirection(getForwardDirection()),
	 rotateSpeed(Math::rad(Scalar(120))),
	 innerAngle(Math::rad(Scalar(30))),outerAngle(Math::rad(Scalar(120))),
	 drawMovementCircles(true),
	 movementCircleColor(0.0f,1.0f,0.0f)
	{
	/* Initialize tool layout: */
	layout.setNumDevices(1);
	layout.setNumButtons(0,1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	floorPlane=cfs.retrieveValue<Plane>("./floorPlane",floorPlane);
	floorPlane.normalize();
	centerOnActivation=cfs.retrieveValue<bool>("./centerOnActivation",centerOnActivation);
	centerPoint=cfs.retrieveValue<Point>("./centerPoint",centerPoint);
	centerPoint=floorPlane.project(centerPoint);
	moveSpeed=cfs.retrieveValue<Scalar>("./moveSpeed",moveSpeed);
	innerRadius=cfs.retrieveValue<Scalar>("./innerRadius",innerRadius);
	outerRadius=cfs.retrieveValue<Scalar>("./outerRadius",outerRadius);
	centerViewDirection=cfs.retrieveValue<Vector>("./centerViewDirection",centerViewDirection);
	centerViewDirection=floorPlane.project(centerViewDirection);
	centerViewDirection.normalize();
	rotateSpeed=Math::rad(cfs.retrieveValue<Scalar>("./rotateSpeed",Math::deg(rotateSpeed)));
	innerAngle=Math::rad(cfs.retrieveValue<Scalar>("./innerAngle",Math::deg(innerAngle)));
	outerAngle=Math::rad(cfs.retrieveValue<Scalar>("./outerAngle",Math::deg(outerAngle)));
	drawMovementCircles=cfs.retrieveValue<bool>("./drawMovementCircles",drawMovementCircles);
	movementCircleColor=cfs.retrieveValue<Color>("./movementCircleColor",movementCircleColor);
	
	/* Set tool class' factory pointer: */
	WalkNavigationTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui，代码行数:44，代码来源:WalkNavigationTool.cpp

示例16:

DraggingToolFactory::DraggingToolFactory(ToolManager& toolManager)
	:ToolFactory("DraggingTool",toolManager)
	{
	#if 0
	/* Insert class into class hierarchy: */
	ToolFactory* toolFactory=toolManager.loadClass("Tool");
	toolFactory->addChildClass(this);
	addParentClass(toolFactory);
	#endif
	}

开发者ID:VisualIdeation，项目名称:Vrui，代码行数:10，代码来源:DraggingTool.cpp

示例17: markerSize

PlaneSnapInputDeviceToolFactory::PlaneSnapInputDeviceToolFactory(ToolManager& toolManager)
	:ToolFactory("PlaneSnapInputDeviceTool",toolManager),
	 markerSize(getUiSize())
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* inputDeviceToolFactory=toolManager.loadClass("InputDeviceTool");
	inputDeviceToolFactory->addChildClass(this);
	addParentClass(inputDeviceToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	markerSize=cfs.retrieveValue<Scalar>("./markerSize",markerSize);
	
	/* Set tool class' factory pointer: */
	PlaneSnapInputDeviceTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui-2.3-001，代码行数:19，代码来源:PlaneSnapInputDeviceTool.cpp

示例18: interactWithWidgets

RayScreenMenuToolFactory::RayScreenMenuToolFactory(ToolManager& toolManager)
	:ToolFactory("RayScreenMenuTool",toolManager),
	 interactWithWidgets(false)
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* menuToolFactory=toolManager.loadClass("MenuTool");
	menuToolFactory->addChildClass(this);
	addParentClass(menuToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	interactWithWidgets=cfs.retrieveValue<bool>("./interactWithWidgets",interactWithWidgets);
	
	/* Set tool class' factory pointer: */
	RayScreenMenuTool::factory=this;
	}

开发者ID:Doc-Ok，项目名称:OpticalTracking，代码行数:19，代码来源:RayScreenMenuTool.cpp

示例19: rotateFactor

TrackballNavigationToolFactory::TrackballNavigationToolFactory(ToolManager& toolManager)
	:ToolFactory("TrackballNavigationTool",toolManager),
	 rotateFactor(1)
	{
	/* Initialize tool layout: */
	layout.setNumButtons(1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* navigationToolFactory=toolManager.loadClass("NavigationTool");
	navigationToolFactory->addChildClass(this);
	addParentClass(navigationToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	rotateFactor=cfs.retrieveValue<Scalar>("./rotateFactor",rotateFactor);
	
	/* Set tool class' factory pointer: */
	TrackballNavigationTool::factory=this;
	}

开发者ID:VisualIdeation，项目名称:Vrui-2.2-003，代码行数:19，代码来源:TrackballNavigationTool.cpp

示例20: rotateFactor

RayInputDeviceToolFactory::RayInputDeviceToolFactory(ToolManager& toolManager)
	:ToolFactory("RayInputDeviceTool",toolManager),
	 rotateFactor(getInchFactor()*Scalar(3))
	{
	/* Initialize tool layout: */
	layout.setNumDevices(1);
	layout.setNumButtons(0,1);
	
	/* Insert class into class hierarchy: */
	ToolFactory* inputDeviceToolFactory=toolManager.loadClass("InputDeviceTool");
	inputDeviceToolFactory->addChildClass(this);
	addParentClass(inputDeviceToolFactory);
	
	/* Load class settings: */
	Misc::ConfigurationFileSection cfs=toolManager.getToolClassSection(getClassName());
	rotateFactor=cfs.retrieveValue<Scalar>("./rotateFactor",rotateFactor);
	
	/* Set tool class' factory pointer: */
	RayInputDeviceTool::factory=this;
	}

开发者ID:jrevote，项目名称:3DA-Vrui，代码行数:20，代码来源:RayInputDeviceTool.cpp

注：本文中的ToolManager类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ToolPtr类代码示例发布时间：2022-05-31

C++ ToolHandler类代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18225|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9662|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8174|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8544|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8451|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9376|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8421|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7855|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8406|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7393|2022-11-06

客服电话

电子邮件

C++ ToolManager类代码示例

示例1: switch

示例2: valuatorThreshold

示例3:

示例4: valuatorThreshold

示例5: lightsaberLength

示例6: scaleDeviceDistance

示例7: rotatePlaneOffset

示例8: linearSnapThreshold

示例9: rotatePlaneOffset

示例10:

示例11: canRoll

示例12:

示例13: addParentClass

示例14: cfs

示例15: floorPlane

示例16:

示例17: markerSize

示例18: interactWithWidgets

示例19: rotateFactor

示例20: rotateFactor

请发表评论

全部评论

上一篇：

下一篇：

librespeed/speedtest: Self-hosted Speedt

CVE-2022-34989

kyamagu/matlab-json: Use official API: h

四维彩超怎么看性别？四维看男孩女孩诀窍

mathjax/MathJax-i18n: MathJax localizati

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053