• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ UTFT类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中UTFT的典型用法代码示例。如果您正苦于以下问题:C++ UTFT类的具体用法?C++ UTFT怎么用?C++ UTFT使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了UTFT类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: doDraw

//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void PulsesCountScreen::doDraw(TFTMenu* menu)
{
  UTFT* dc = menu->getDC();
  uint8_t* oldFont = dc->getFont();

  dc->setFont(BigRusFont);
  dc->setColor(VGA_WHITE);

  menu->print("ПАРАМЕТРЫ",130,2);
  menu->print("СИСТОЛИЧЕСКОЕ  ", 1, 37);
  menu->print("ДИАСТОЛИЧЕСКОЕ ", 1, 72);
  menu->print("ЧАСТОТА ПУЛЬСА", 1, 107);
  menu->print("ПАЛЬПАЦИЯ", 1, 142);


  if (channel4PulsesVal.toInt() == 0)
  {
	  screenButtons->relabelButton(channel4Button, "ОТКЛ");
  }
  else
  {
	  screenButtons->relabelButton(channel4Button, "ВКЛ");
  }
  screenButtons->drawButton(channel4Button);
  
  dc->setFont(oldFont);
}
开发者ID:ArduinoNanoV3,项目名称:ArduinoNanoV3,代码行数:28,代码来源:Screen2.cpp


示例2: SdrawScreen

void ECCalibrateScreen::SdrawScreen()
{
	myUTFT.clrScr();
	myUTFT.setBackColor(0, 0, 255);

	myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLUE);

	myButtons.addButton( 10, 10, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 160, 10, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 10, 64, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 160, 64, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 10, 116, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 160, 116, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 10, 170, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
	myButtons.addButton( 160, 170, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);

	myButtons.drawButtons();

	//Add text to buttons.
	myUTFT.setBackColor (161,190,237);
	myUTFT.print("Reset", 55, 30);
	myUTFT.print("Info", 190, 30);
	myUTFT.print("Read", 55, 90);
	myUTFT.print("TRead", 190, 90);
	myUTFT.print("Stop", 55, 146);
	myUTFT.print("Start", 190, 146);
	myUTFT.print("Back", 55, 195);
	myUTFT.print("Calibrate", 185, 195);
}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:29,代码来源:ECCalibrateScreen.cpp


示例3: render

void License::render(UTFT tft) {
	tft.clrScr();
	tft.setFont(SmallFont);
	_tft = tft;
	_index = _offset = 0;
	update();
}
开发者ID:danielesteban,项目名称:DarthStep,代码行数:7,代码来源:License.cpp


示例4: SwaitForTouch

void ECCalibrateScreen::endCalibration()
{
	myUTFT.fillScr(VGA_BLUE);
	myUTFT.setColor(VGA_RED);
	myUTFT.fillRoundRect(80, 70, 239, 169);

	myUTFT.setColor(VGA_WHITE);
	myUTFT.setBackColor(VGA_RED);
	myUTFT.print("! All Done !", CENTER, 93);
	myUTFT.print("Touch Screen", CENTER, 119);
	myUTFT.print("To Exit", CENTER, 132);

	SwaitForTouch();
	myUTFT.clrScr();

	myUTFT.setFont(BigFont);

	myButtons.enableButton( /*resetButton*/ 0);
	myButtons.enableButton( /*infoButton*/ 1);
	myButtons.enableButton( /*readButton*/ 2);
	myButtons.enableButton( /*tempReadButton*/ 3);
	myButtons.enableButton( /*stopButton*/ 4);
	myButtons.enableButton( /*startButton*/ 5);
	myButtons.enableButton( /*backButton*/6);
	myButtons.enableButton( /*calibrateButton*/7);

	SdrawScreen();

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:29,代码来源:ECCalibrateScreen.cpp


示例5:

//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1_0::doDraw(TFTMenu* menu)
{
  UTFT* dc = menu->getDC();
  dc->setColor(VGA_WHITE);
  dc->setBackColor(VGA_BLACK);
  dc->setFont(TFT_FONT);
  
  // тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
  menu->print("Настройки", 50, 0);
}
开发者ID:XBeeModule,项目名称:XBee,代码行数:11,代码来源:Screen1_0.cpp


示例6: resetButtons

void PlugScreen::drawScreen(  )
{
	//Clear What was there.
	 myUTFT.clrScr();

	 resetButtons();
	 myUTFT.setBackColor (0, 0, 0);
	 myUTFT.print("Plug Setup", CENTER, 1);
	 myUTFT.setBackColor(0, 0, 255);

	 //Draw Lights button
	 lightsButton = myButtons.addButton( 10, 54, 145, 53, mainButton);
	 myButtons.drawButton(lightsButton);
	 myUTFT.print("Lights", 35, 71);

	 heaterButton = myButtons.addButton( 10, 110, 145, 53, mainButton);
	 myButtons.drawButton(heaterButton);
	 myUTFT.print("Heater", 35, 135);


	 pumpButton = myButtons.addButton( 160, 54, 145, 53, mainButton);
	 myButtons.drawButton(pumpButton);
	 myUTFT.print("Pump", 190, 71);

	 settingsButton = myButtons.addButton( 160, 110, 145, 53, mainButton);
	 myButtons.drawButton(settingsButton);
	 myUTFT.print("Override", 175, 135);

	 //Draw back button
	 back2SetupButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
	 myButtons.drawButton(back2SetupButton);
	 myUTFT.print("Back", 55, 195);

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:34,代码来源:PlugScreen.cpp


示例7: resetButtons

/*
 * Delivering this instruction will instruct the E.C. Circuit to transmit it device info.
	Full proper syntax: i<cr> or I<CR>
	The E.C. Circuit will respond: E,V3.0,4/11<CR>
	Where:
	E =E.C. Circuit
	V3.1= Firmware version
	5/13= Date firmware was written
 */
void ECCalibrateScreen::getInfo()
{
	inputstring = "I\r";  //Command to get info
	Serial3.print(inputstring); //send command to sensor.

	//Draw part of the screen here and the info when we have it.
	//info comes after the loop has iterated.
	myUTFT.clrScr();
	resetButtons();
	//Draw back button
	subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
	myButtons.drawButton(subBackButton);
	myUTFT.setBackColor (161,190,237);
	myUTFT.print("Back", 45, 185);

	waiting_for_info = true;

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:27,代码来源:ECCalibrateScreen.cpp


示例8: delay

void ECCalibrateScreen::getTempSingleReading()
{
	inputstring = ( waterTempString + "\r");  //"17.8\r"Command to get reading.
	Serial3.print(inputstring); //send command to sensor.
	delay(1000); //This takes 1000ms to complete.

	//Draw part of the screen here and the info when we have it.
	//info comes after the loop has iterated.
	myUTFT.clrScr();
	resetButtons();
	//Draw back button
	subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
	myButtons.drawButton(subBackButton);
	myUTFT.setBackColor (161,190,237);
	myUTFT.print("Back", 45, 185);

	waiting_for_single_reading = true;

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:19,代码来源:ECCalibrateScreen.cpp


示例9:

//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doUpdate(TFTMenu* menu)
{
    // тут обновляем внутреннее состояние
	if (isActive())
	{
		DS3231Time tm = RealtimeClock.getTime();
		if (oldsecond != tm.second)
		{
			oldsecond = tm.second;
			UTFT* dc = menu->getDC();
			dc->setColor(VGA_WHITE);
			dc->setBackColor(VGA_BLACK);
			// получаем компоненты даты в виде строк
			String strDate = RealtimeClock.getDateStr(tm);
			String strTime = RealtimeClock.getTimeStr(tm);
			dc->setFont(SmallRusFont);
			// печатаем их
			dc->print(strDate, 5, 305);
			dc->print(strTime, 160, 305);
															//dc->printNumF(setupPin.power3V3, 1, 195, 1);    //
															//dc->printNumF(setupPin.power5V0, 1, 195, 15);   //
															//dc->printNumI(setupPin.power200, 195, 30);      //
		}
	}
}
开发者ID:XBeeModule,项目名称:XBee,代码行数:26,代码来源:Screen1.cpp


示例10: delay

//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doDraw(TFTMenu* menu)
{
  UTFT* dc = menu->getDC();
  dc->setColor(VGA_WHITE);
  dc->setBackColor(VGA_BLACK);
  dc->setFont(TFT_FONT);
  // тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
  menu->print("Главный экран", 15, 0);
  
  //// выводим число
  //dc->setColor(VGA_BLUE);
  //int number = 12345;
  //dc->printNumI(number, 20,200);

  //dc->setFont(SmallSymbolFont);
  //// выводим спецсимвол
  //dc->printChar(47,20,250);

  // возвращает шрифт по умолчанию
  dc->setFont(TFT_FONT); 
  /*RealXBeeMenu.XBee_status();
  delay(300);*/
  }
开发者ID:XBeeModule,项目名称:XBee,代码行数:24,代码来源:Screen1.cpp


示例11: render

void Mixer::render(UTFT tft) {
	tft.clrScr();

	tft.setColor(255, 255, 255);
	tft.fillRect(0, 0, tft.getDisplayXSize() - 1, 12);
	tft.setBackColor(255, 255, 255);
	tft.setColor(0, 0, 0);
	tft.setFont(SmallFont);
	tft.print("Mixer", 10, 0);

	_tft = tft;
	for(byte x=0;x<3; x++) {
		renderedGains[x] = 0;
		renderMute(x);
	}
	update();
}
开发者ID:danielesteban,项目名称:DarthStep,代码行数:17,代码来源:Mixer.cpp


示例12: begin

void ECCalibrateScreen::begin()
{

	// Initial setup
	myUTFT.InitLCD();
	myUTFT.clrScr();

	myTouch.InitTouch();
	myTouch.setPrecision(PREC_MEDIUM);

	myUTFT.setFont(BigFont);
	myUTFT.setBackColor(0, 0, 255);
	myButtons.setTextFont(BigFont);

	resetButtons();

	sensorstring = "";
	sensorstring.reserve(30); //set aside some bytes for receiving data
	inputstring = "";

	waiting_for_info = false;
	waiting_for_single_reading = false;
	sensor_stringcomplete = false;
	factReset = false;
	inStopMode = false;
	waiting_for_dry = false;

	Serial3.begin(38400); //To communicate with the sensor.

	Serial.begin(115200);

	//Start Read straight away.
	inputstring = ( waterTempString + ",C\r");  //Start based on temp.
	Serial3.print(inputstring); //send command to sensor.

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:36,代码来源:ECCalibrateScreen.cpp


示例13: startCalibration

void ECCalibrateScreen::startCalibration()
{

	myButtons.disableButton( resetButton );
	myButtons.disableButton( infoButton );
	myButtons.disableButton( readButton );
	myButtons.disableButton( tempReadButton );
	myButtons.disableButton( stopButton );
	myButtons.disableButton( startButton );
	myButtons.disableButton( backButton);
	myButtons.disableButton( calibrateButton);

	inputstring = "P,1\r";  //In Hydroponics we use always E.C Sensor 0.1 -- Fresh Water
	Serial3.print(inputstring); //send command to sensor.

	myUTFT.setFont(SmallFont);
	dryCalibration();
	highCalibration();

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:20,代码来源:ECCalibrateScreen.cpp


示例14: drawDryScreen

void drawDryScreen()
{
	String version = sensorstring.substring(3,6);
	String date = sensorstring.substring(7,11);
	sensorstring="";

	//resetButtons();
	myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
	//Indicate that we have changed screens.


	myUTFT.setBackColor (VGA_BLACK);
	myUTFT.print("EC HW Info", CENTER, 1);

	myUTFT.print("Sensor Version", CENTER, 30);
	myUTFT.print(version, CENTER, 54);
	myUTFT.print("Firmware Date", CENTER, 78);
	myUTFT.print(date, CENTER, 102);

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:20,代码来源:ECCalibrateScreen.cpp


示例15: drawReadingScreen

//Static so can be used with the callback.
void drawReadingScreen()
{
	String EC = sensorstring.substring(0,3);
	String TDS = sensorstring.substring(4,6);
	String SAL = sensorstring.substring(7,8);
	sensorstring="";

	//resetButtons();
	myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
	//Indicate that we have changed screens.


	myUTFT.setBackColor (VGA_BLACK);
	myUTFT.print("EC Get Reading", CENTER, 1);

	myUTFT.print("EC Level", CENTER, 30);
	myUTFT.print(EC, CENTER, 54);
	myUTFT.print("TDS Level", CENTER, 78);
	myUTFT.print(TDS, CENTER, 102);
	myUTFT.print(SAL, CENTER, 126);

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:23,代码来源:ECCalibrateScreen.cpp


示例16: String

void ECCalibrateScreen::updateLowWaitScreen()
{
	iSeconds = iSeconds - 3;
	String thisString = String(iSeconds);
	myUTFT.clrScr();
	myUTFT.print("Calibration in Progress", CENTER, 30);
	myUTFT.print("Seconds left until ready " + thisString, CENTER, 42);


	switch(iCounter){

	case 0:
		Serial.println("PRINT 0");
		myUTFT.print("************************************", CENTER, 114);
		iCounter = 1;
		break;
	case 1:
		Serial.println("PRINT 1");
		myUTFT.print("******************", CENTER, 114);
		iCounter = 2;
		break;
	case 2:
		Serial.println("PRINT 2");
		myUTFT.print("*****", CENTER, 114);
		iCounter = 0;
		break;

	}

   if(iSeconds == 0){
	   iSeconds = max_seconds_for_calibration;
	   //Move to next stage.
	   endCalibration();
   }



}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:38,代码来源:ECCalibrateScreen.cpp


示例17: setAddresstoEEPROM

void PlugScreen::waitForReceiver(NewRemoteCode receivedCode)
{
	//Clear What was there.
	myUTFT.setFont(SmallFont);
	myUTFT.clrScr();
	myUTFT.setColor(255, 0, 0);
	myUTFT.fillRect(0, 0, 220, 13);
	myUTFT.setColor(255, 255, 255);
	myUTFT.setBackColor(255, 0, 0);
	myUTFT.drawLine(0, 14, 320, 14);
	myUTFT.print("ID Set", CENTER, 1);
	myUTFT.setBackColor(0, 0, 0);

	setAddresstoEEPROM(receivedCode.address);
	if(plugDevice.lights)
	{
		EEPROM.write(EEPROM_LEARNED_LIGHTS_UNIT,receivedCode.unit);
		plugDevice.lights = false;
	}
	if(plugDevice.pump)
	{
		EEPROM.write(EEPROM_LEARNED_PUMP_UNIT,receivedCode.unit);
		plugDevice.pump = false;
	}
	if(plugDevice.heater)
	{
		EEPROM.write(EEPROM_LEARNED_HEATER_UNIT,receivedCode.unit);
		plugDevice.heater = false;
	}

	//unsigned long add = getAddress();
	String sAddress(receivedCode.address);
	String slightID(receivedCode.unit);

	myUTFT.print("The unit has been set to unit ", LEFT, 30);
	myUTFT.print(slightID, LEFT, 42);
	myUTFT.print("The Transmitting Address is", LEFT, 54);
	myUTFT.print(sAddress, LEFT, 66);
	myUTFT.print("You can now use the plug", LEFT, 78);
	myUTFT.print("**********************************", LEFT, 90);

	myButtons.deleteAllButtons();
	exitButton = -1;

	exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
	myButtons.drawButton(exitButton);
	myUTFT.setBackColor (161,190,237);
	myUTFT.print("Back", 55, 195);
	myUTFT.setFont(BigFont);

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:51,代码来源:PlugScreen.cpp


示例18: drawPrepareScreen

void  PlugScreen::drawPrepareScreen()
{
	Serial.println("PlugScreen::handlePlugScreen SET LIGHTS ID  \n");
	myUTFT.setFont(SmallFont);
	myUTFT.clrScr();
	myUTFT.setColor(255, 0, 0);
	myUTFT.fillRect(0, 0, 220, 13);
	myUTFT.setColor(255, 255, 255);
	myUTFT.setBackColor(255, 0, 0);
	myUTFT.drawLine(0, 14, 320, 14);
	myUTFT.print("Plug Setting", CENTER, 1);
	myUTFT.setBackColor(0, 0, 0);

	myUTFT.print("Use the remote that came with your", LEFT, 30);
	myUTFT.print("plugs to set which unit and address it", LEFT, 42);
	myUTFT.print("uses.Just point the remote at the screen", LEFT, 54);
	myUTFT.print("and press a button for the unit you want", LEFT, 66);
	myUTFT.print("to use for the lights", LEFT, 78);
	myUTFT.print("", LEFT, 90);
	myUTFT.print("Please press a unit for the lights", LEFT, 102);
	myUTFT.print("", LEFT, 114);

	exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
	myButtons.drawButton(exitButton);
	myUTFT.setBackColor (161,190,237);
	myUTFT.print("Cancel", 55, 195);
	myUTFT.setFont(BigFont);
}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:28,代码来源:PlugScreen.cpp


示例19: waitForTouch

void ECCalibrateScreen::dryCalibration()
{

	myUTFT.clrScr();
	myUTFT.setColor(255, 0, 0);
	myUTFT.fillRect(0, 0, 220, 13);
	myUTFT.setColor(255, 255, 255);
	myUTFT.setBackColor(255, 0, 0);
	myUTFT.drawLine(0, 14, 320, 14);
	myUTFT.print("EC Calibration", CENTER, 1);
	myUTFT.setBackColor(0, 0, 0);

	myUTFT.print("Do NOT put sensor in any Liquid you are", LEFT, 30);
	myUTFT.print("going to calibrate for a dry condition", LEFT, 42);
	myUTFT.print("This is much like setting a TARE on a", LEFT, 54);
	myUTFT.print("scale", LEFT, 66);
	myUTFT.print("", LEFT, 78);
	myUTFT.print("Please make sure that the EC sensor is", LEFT, 90);
	myUTFT.print("connected to the BNC connector before", LEFT, 102);
	myUTFT.print("you continue", LEFT, 114);
	//myUTFT.print("crosshairs in sequence.", LEFT, 126);
	myUTFT.print("Touch screen to continue", CENTER, 162);

	waitForTouch();
	myUTFT.clrScr();

	inputstring = "Z0\r";  //Command to get info
	Serial3.print(inputstring); //send command to sensor.

}
开发者ID:markcgriffiths,项目名称:hydrocontroller,代码行数:30,代码来源:ECCalibrateScreen.cpp


示例20: render

void Keyboard::render(UTFT tft) {
    tft.clrScr();
    tft.setFont(BigFont);

    tft.setBackColor(255, 255, 255);
    tft.setColor(255, 255, 255);
    tft.drawRoundRect(30, 30, tft.getDisplayXSize() - 111, 70);
    tft.fillRect(tft.getDisplayXSize() - 106, 30, tft.getDisplayXSize() - 66, 70);
    tft.setColor(0, 0, 0);
    tft.print("<-", tft.getDisplayXSize() - 102, 43);
    tft.setColor(255, 255, 255);
    tft.fillRect(tft.getDisplayXSize() - 61, 30, tft.getDisplayXSize() - 21, 70);
    tft.setColor(0, 0, 0);
    tft.print("OK", tft.getDisplayXSize() - 57, 43);

    byte br = 9,
         nl = 0,
         offset = 1;

    int x = offset,
        y = 120;

    for(byte j=0; j<numKeys; j++) {
        tft.setColor(255, 255, 255);
        tft.fillRect(x, y, x + 30, y + 30);
        tft.setColor(0, 0, 0);
        String str = "";
        str += keys[j]; //lame!
        tft.print(str, x + 7, y + 8);
        x += 32;
        nl++;
        if(nl > br) {
            offset += 15;
            x = offset;
            nl = 0;
            y += 32;
            br -= 1;
        }
    }

    _tft = tft;
}
开发者ID:sepych,项目名称:ArduinoLib,代码行数:42,代码来源:Keyboard.cpp



注:本文中的UTFT类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ UTL_ScopeActiveIterator类代码示例发布时间:2022-05-31
下一篇:
C++ UTF8类代码示例发布时间:2022-05-31
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap