• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ V类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中V的典型用法代码示例。如果您正苦于以下问题:C++ V类的具体用法?C++ V怎么用?C++ V使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了V类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: TYPED_TEST

TYPED_TEST(Bell_Math_Vector2, ConstMethodCompileTime) {
	using T = TypeParam;
	using V = Vector2<T>;

	constexpr V a = { T{1}, 0};
	constexpr V b = { T{10}, T{13} };
	constexpr V c = { T{-5}, T{ 8} };

	static_assert( V::zero ().isZero(), "");
	static_assert(!V::unitX().isZero(), "");
	static_assert(!V::unitY().isZero(), "");

	static_assert(!V::zero ().equals(a), "");
	static_assert( V::unitX().equals(a), "");
	static_assert(!V::unitY().equals(a), "");

	static_assert(b.dot(c) == 54, "");
	static_assert(c.dot(b) == 54, "");

	static_assert(b.cross(c) ==  145, "");
	static_assert(c.cross(b) == -145, "");

	static_assert(b.lengthSq() == 269, "");
	static_assert(c.lengthSq() ==  89, "");

	static_assert(b.distanceSq(c) == 250, "");
	static_assert(c.distanceSq(b) == 250, "");
}
开发者ID:unvBell,项目名称:Bell,代码行数:28,代码来源:Test_Vector2.cpp


示例2: BOOST_FIXTURE_TEST_CASE

BOOST_FIXTURE_TEST_CASE(ViscosityValue, TestFixture<SetupSimple>)
{
    const Opm::BlackoilPropsAdFromDeck::Cells cells(5, 0);

    typedef Opm::BlackoilPropsAdFromDeck::V V;
    typedef Opm::BlackoilPropsAdFromDeck::ADB ADB;

    V Vpw;
    Vpw.resize(cells.size());
    Vpw[0] =  1*Opm::unit::barsa;
    Vpw[1] =  2*Opm::unit::barsa;
    Vpw[2] =  4*Opm::unit::barsa;
    Vpw[3] =  8*Opm::unit::barsa;
    Vpw[4] = 16*Opm::unit::barsa;

    // standard temperature
    V T = V::Constant(cells.size(), 273.15+20);

    BOOST_REQUIRE_EQUAL(Vpw.size(), cells.size());

    const V VmuWat = boprops_ad.muWat(ADB::constant(Vpw), ADB::constant(T), cells).value();

    BOOST_REQUIRE_EQUAL(Vpw.size(), cells.size());

    // Zero pressure dependence in water viscosity
    for (V::Index i = 0, n = VmuWat.size(); i < n; ++i) {
        BOOST_CHECK_EQUAL(VmuWat[i], VmuWat[0]);
    }
}
开发者ID:kristfho,项目名称:opm-simulators,代码行数:29,代码来源:test_boprops_ad.cpp


示例3: init

void init () {
	char *buf;

	buf = (char *) MemAlloc (2048);
	if (! CapInit (buf)) {
		outerr("cannot read termcap\n",0);
		exit (1);
	}
	if (! v.VInit ()) {
		outerr("cannot initialize terminal\n",0);
		exit (1);
	}
	if (COLS < 80) {
		outerr("must be 80 columns on terminal\n",0);
		exit (1);
	}
	KeyInit (keymap, VFlush);
	v.VOpen();
	MemFree ((mem *) buf);

	/* H is the number of lines at file window */

	H = LINES/2-1;

}
开发者ID:kotohvost,项目名称:arvid,代码行数:25,代码来源:main.cpp


示例4: main

int main() {
  {
    using V = std::variant<int, ConstexprTestTypes::NoCtors>;
    constexpr V v;
    static_assert(v.index() == 0, "");
  }
  {
    using V = std::variant<int, long>;
    constexpr V v(std::in_place_index<1>);
    static_assert(v.index() == 1, "");
  }
  {
    using V = std::variant<int, std::string>;
    V v("abc");
    assert(v.index() == 1);
    v = 42;
    assert(v.index() == 0);
  }
#ifndef TEST_HAS_NO_EXCEPTIONS
  {
    using V = std::variant<int, MakeEmptyT>;
    V v;
    assert(v.index() == 0);
    makeEmpty(v);
    assert(v.index() == std::variant_npos);
  }
#endif
}
开发者ID:kraj,项目名称:libcxx,代码行数:28,代码来源:index.pass.cpp


示例5: quitdeco

/* cmd, com */
void quitdeco(void) {
	VMove (LINES-1, 0);
	VClearLine ();
	VSync ();
	v.VClose ();
	exit (0);
}
开发者ID:kotohvost,项目名称:arvid,代码行数:8,代码来源:main.cpp


示例6: S

 S(const V<int>& arr) : arr(arr) {
     auto& a = this->arr; 
     N = a.size();
     reverse(a.begin(), a.end());
     a.push_back(0);
     reverse(a.begin(), a.end());
     
     t.resize(N+1, V<V<int>>(N+1, V<int>(N+1, -1)));        
 }
开发者ID:antoshkaplus,项目名称:CompetitiveProgramming,代码行数:9,代码来源:borw.cpp


示例7: test_default_ctor_basic

void test_default_ctor_basic() {
  {
    std::variant<int> v;
    assert(v.index() == 0);
    assert(std::get<0>(v) == 0);
  }
  {
    std::variant<int, long> v;
    assert(v.index() == 0);
    assert(std::get<0>(v) == 0);
  }
  {
    using V = std::variant<int, long>;
    constexpr V v;
    static_assert(v.index() == 0, "");
    static_assert(std::get<0>(v) == 0, "");
  }
  {
    using V = std::variant<int, long>;
    constexpr V v;
    static_assert(v.index() == 0, "");
    static_assert(std::get<0>(v) == 0, "");
  }
}
开发者ID:AstroVPK,项目名称:LLVM-4.0.0,代码行数:24,代码来源:default.pass.cpp


示例8: main

int main(){
	int T,a,b,r;
	for(scanf("%d",&T);T--;){
		scanf("%d%d%d",&a,&b,&r);r--;
		V x(n*n);
		V e(n*n);
		z.resize(n*n);

		x[0]=x[1]=x[2]=1;
		e[0]=1,e[3]=1;

		for(;r;r>>=1){
			if(r&1)e=Me(e,x);
			x=Mx(x);
		}
		printf("%lld\n",(e[0]*b+e[1]*a)%m);
	}
}
开发者ID:AbhiNki,项目名称:procon,代码行数:18,代码来源:fibonacci-finding-easy.cpp


示例9: main

main(){
	int t=1,T,r;
	for(;~scanf("%d",&r);){
		int f=1-r%2;
		V x(n*n);
		V e(n*n);
		z.resize(n*n);

		x[0]=1,x[1]=3,x[2]=1,x[3]=1;
		e[0]=1,e[3]=1; //unit

		for(;r;r>>=1){
			if(r&1)e=Me(e,x);
			x=Mx(x);
		}
		printf("%d\n",(int)(2*e[0]-f)%1000);
	}
}
开发者ID:SymonSaroar,项目名称:procon,代码行数:18,代码来源:tyama_yukicoder344.cpp


示例10: main

int main(){
	int T;
	long long t,t0;
	//for(scanf("%d",&T);T--;){
		cin>>t;
		V x(n*n);
		V e(n*n);
		z.resize(n*n);

		x[0]=x[3]=3;
		x[1]=x[2]=1;
		e[0]=e[3]=1;
		for(;t;t>>=1){
			if(t&1)e=Me(e,x);
			x=Mx(x);
		}
		cout<<e[0]<<endl;
	//}
}
开发者ID:AbhiNki,项目名称:procon,代码行数:19,代码来源:tyama_codeforces186C.cpp


示例11: TEST_TYPES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

}}}*/

#include "unittest.h"

using namespace Vc;

// reversed{{{1
TEST_TYPES(V, reversed, (ALL_VECTORS, SIMD_ARRAYS(2), SIMD_ARRAYS(3), SIMD_ARRAYS(15)))
{
    const V x = V::IndexesFromZero() + 1;
    const V reference = V::generate([](int i) { return V::Size - i; });
    COMPARE(x.reversed(), reference);
}

// testCall{{{1
template<typename T, typename Mem> struct Foo
{
    Foo() : i(0) {}
    void reset() { i = 0; }
    void operator()(T v) { d[i++] = v; }
    Mem d;
    int i;
};

TEST_TYPES(V, testCall, (ALL_VECTORS))
开发者ID:VcDevel,项目名称:Vc,代码行数:31,代码来源:utils.cpp


示例12: TEST_CASE

 */


#include "prio_queue.hpp"
#include <queue>

#define CATCH_CONFIG_MAIN
#include <catch.hpp>

using A = rollbear::prio_q_internal::heap_heap_addressing<8>;
using V = rollbear::prio_q_internal::skip_vector<int, 4>;
using rollbear::prio_queue;

TEST_CASE("a default constructed vector is empty", "[vector]")
{
  V v;
  REQUIRE(v.size() == 0);
  REQUIRE(v.empty());
}

TEST_CASE("a has size 2 after one push_key", "[vector]")
{
  V v;
  auto i = v.push_back(1);
  REQUIRE(!v.empty());
  REQUIRE(v.size() == 2);
  REQUIRE(i == 1);
}

TEST_CASE("a vector of size 2 becomes empty on pop", "[vector]")
{
开发者ID:rollbear,项目名称:prio_queue,代码行数:31,代码来源:self_test.cpp


示例13: computeInjectedProduced

    /// @brief Computes injected and produced volumes of all phases,
    ///        and injected and produced polymer mass - in the compressible case.
    /// Note 1: assumes that only the first phase is injected.
    /// Note 2: assumes that transport has been done with an
    ///         implicit method, i.e. that the current state
    ///         gives the mobilities used for the preceding timestep.
    /// @param[in]  props     fluid and rock properties.
    /// @param[in]  polyprops polymer properties
    /// @param[in]  state     state variables (pressure, fluxes etc.)
    /// @param[in]  transport_src  if < 0: total reservoir volume outflow,
    ///                       if > 0: first phase *surface volume* inflow.
    /// @param[in]  inj_c     injected concentration by cell
    /// @param[in]  dt        timestep used
    /// @param[out] injected  must point to a valid array with P elements,
    ///                       where P = s.size()/transport_src.size().
    /// @param[out] produced  must also point to a valid array with P elements.
    /// @param[out] polyinj   injected mass of polymer
    /// @param[out] polyprod  produced mass of polymer
    void computeInjectedProduced(const BlackoilPropsAdInterface& props,
                                 const Opm::PolymerPropsAd& polymer_props,
                                 const PolymerBlackoilState& state,
                                 const std::vector<double>& transport_src,
                                 const std::vector<double>& inj_c,
                                 const double dt,
                                 double* injected,
                                 double* produced,
                                 double& polyinj,
                                 double& polyprod)
    {
        const int num_cells = transport_src.size();
        if (props.numCells() != num_cells) {
            OPM_THROW(std::runtime_error, "Size of transport_src vector does not match number of cells in props.");
        }
        const int np = props.numPhases();
        if (int(state.saturation().size()) != num_cells*np) {
            OPM_THROW(std::runtime_error, "Sizes of state vectors do not match number of cells.");
        }
		std::vector<int> cells(num_cells);
		const V p = Eigen::Map<const V>(&state.pressure()[0], num_cells, 1);
        const DataBlock s = Eigen::Map<const DataBlock>(&state.saturation()[0], num_cells, np);
		const V sw = s.col(0);
		const V so = s.col(1);
		const V c = Eigen::Map<const V>(&state.concentration()[0], num_cells, 1);
		const V cmax = Eigen::Map<const V>(&state.maxconcentration()[0], num_cells, 1);
		const V trans_src = Eigen::Map<const V>(&transport_src[0], num_cells, 1);
		V src = V::Constant(num_cells, -1.0); // negative is injec, positive is producer.
		for (int cell = 0; cell < num_cells; ++cell) {
			cells[cell] = cell;
			if(transport_src[cell] > 0.0) {
				src[cell] = 1.0;
			}
		}
        //Add PhasePresence make muOil() happy.
        std::vector<PhasePresence> phaseCondition(num_cells);
        for (int c = 0; c < num_cells; ++c) {
            phaseCondition[c] = PhasePresence();
            phaseCondition[c].setFreeWater();
            phaseCondition[c].setFreeOil();
        }
		const Selector<double> src_selector(src);
		const V one = V::Constant(num_cells, 1.0);
		const V zero = V::Zero(num_cells);
		const std::vector<V> kr = props.relperm(sw, so, zero, cells);
		const V muw = props.muWat(p, cells);
		const V muo = props.muOil(p, zero, phaseCondition, cells);
        const V krw_eff = polymer_props.effectiveRelPerm(c, cmax, kr[0]);
		const V inv_muw_eff = polymer_props.effectiveInvWaterVisc(c, muw.data());
		std::vector<V> mob(np);
		mob[0] = krw_eff * inv_muw_eff;
		mob[1] = kr[1] / muo;
		
		const V watmob_c = src_selector.select(mob[0], one);
		const V oilmob_c = src_selector.select(mob[1], zero);
		const V flux = trans_src * dt;
	    const V totmob_c = watmob_c + oilmob_c;
		const V wat_src = flux * (watmob_c / totmob_c);
		const V oil_src = flux * (oilmob_c / totmob_c);
		const V mc = polymer_props.polymerWaterVelocityRatio(c);
		
        polyinj = 0.0;
        polyprod = 0.0;
		std::fill(injected, injected + np , 0.0);
		std::fill(produced, produced + np , 0.0);
		for (int cell = 0; cell < num_cells; ++cell) {
			if (wat_src[cell] < 0) {
				injected[0] += wat_src[cell];
				polyinj += injected[0] * inj_c[cell];
			} else {
				produced[0] += wat_src[cell];
				produced[1] += oil_src[cell];
				polyprod += produced[0] * mc[cell];
			}
		}
    }
开发者ID:qilicun,项目名称:script,代码行数:94,代码来源:utilities.cpp


示例14: main

main (int argc, char **argv, char **envp) {
	register c;

	if (argc > 2) {
		outerr("Usage: deco [dirname]\n",0);
		exit (1);
	}
	outerr("Demos Commander, Copyright (C) 1989-1994 Serge Vakulenko\n",0);
	palette = dflt_palette;
	EnvInit (envp);
	uid = getuid ();
	gid = getgid ();
# ifdef GROUPS
	gidnum = getgroups (sizeof(gidlist)/sizeof(gidlist[0]), (unsigned int *)gidlist);
# endif
	ppid = getppid ();
	user = username (uid);
	group = groupname (gid);
	tty = ttyname (0);
	machine = getmachine ();
#if 0
	sigign();
#else
	signal(SIGTERM, SIG_IGN);
	signal(SIGQUIT, SIG_IGN);
	signal(SIGINT, SIG_IGN);
# ifdef SIGTSTP
	signal(SIGTSTP, SIG_IGN);
# endif
#endif
	init ();
//	inithome ();
	VClear ();
/* init class dir */
	if (argc > 1)
//		chdir (argv [1]);
		left = new dir(argv [1]);
	else
		left = new dir;
	right = new dir;
	left->d.basecol = 0;
	right->d.basecol = 40;
/*-----------*/
	initfile.read();
	if (uid == 0)
		palette.dimfg = 6;
	v.VSetPalette (palette.fg, palette.bg, palette.revfg, palette.revbg,
		palette.boldfg, palette.boldbg, palette.boldrevfg, palette.boldrevbg,
		palette.dimfg, palette.dimbg, palette.dimrevfg, palette.dimrevbg);
	setdir (left, ".");
	setdir (right, ".");
	left->chdir(left->d.cwd);
	cur = left;
	draw.draw(cur, left, right);
	for (;;) {
		if (! cmdreg)
			draw.drawcursor(cur);
//		cmd.drawcmd(cur, &left, &right);
		VSync ();
		c = KeyGet ();
		if (! cmdreg)
			draw.undrawcursor(cur);
		switch (c) {
		case '+':               /* select */
		case '-':               /* unselect */
			if (! cpos && ! cmdreg && ! cur->d.status) {
				if (c == '+')
					tagall ();
				else
					untagall ();
				draw.draw(cur, left, right);
				continue;
			}
		default:
//			if (c>=' ' && c<='~' || c>=0300 && c<=0376) {
//				if (cpos || c!=' ')
//					cmd.inscmd(c);
//				continue;
//			}
			VBeep ();
			continue;
//		case cntrl ('V'):       /* quote next char */
//			cmd.inscmd(quote ());
//			continue;
//		case cntrl ('J'):       /* insert file name */
//			if (! cmdreg && ! cur->status)
//				cmd.namecmd(cur);
//			continue;
//		case cntrl ('G'):
//			cmd.delcmd();
//			continue;
//		case meta ('b'):        /* backspace */
//			if (cpos) {
//				cmd.leftcmd();
//				cmd.delcmd();
//			}
//			continue;
		case cntrl ('O'):       /* set/unset command mode */
		case cntrl ('P'):       /* set/unset command mode */
			switchcmdreg ();
//.........这里部分代码省略.........
开发者ID:kotohvost,项目名称:arvid,代码行数:101,代码来源:main.cpp


示例15: rebind

 void rebind( V const & v) { _v.rebind(v);}
开发者ID:Swagataacharya,项目名称:TRIQS,代码行数:1,代码来源:view_tools.hpp


示例16: captureN

}}}*/

#include "unittest.h"
#include "../common/simdarray.h"

using namespace Vc;

template <typename T, size_t N> constexpr size_t captureN(const SimdArray<T, N> &)
{
    return N;
}

TEST_TYPES(V, createArray, (SIMD_ARRAY_LIST))
{
    typedef typename V::VectorEntryType VT;
    V array;

    COMPARE(array.size(), captureN(V()));
    VERIFY(sizeof(array) >= array.size() * sizeof(VT));
    VERIFY(sizeof(array) <= 2 * array.size() * sizeof(VT));
}

template <typename T, typename U> constexpr T bound(T x, U max)
{
    return x > max ? max : x;
}

TEST_TYPES(V, checkArrayAlignment, (SIMD_ARRAY_LIST))
{
    using T = typename V::value_type;
    using M = typename V::mask_type;
开发者ID:jcowgill,项目名称:Vc,代码行数:31,代码来源:simdarray.cpp


示例17: main

int main()
try
{
    typedef Opm::AutoDiffBlock<double> ADB;
    typedef ADB::V V;
    typedef Eigen::SparseMatrix<double> S;

    Opm::time::StopWatch clock;
    clock.start();
    const Opm::GridManager gm(3,3);//(50, 50, 10);
    const UnstructuredGrid& grid = *gm.c_grid();
    using namespace Opm::unit;
    using namespace Opm::prefix;
    // const Opm::IncompPropertiesBasic props(2, Opm::SaturationPropsBasic::Linear,
    //                                        { 1000.0, 800.0 },
    //                                        { 1.0*centi*Poise, 5.0*centi*Poise },
    //                                        0.2, 100*milli*darcy,
    //                                        grid.dimensions, grid.number_of_cells);
    // const Opm::IncompPropertiesBasic props(2, Opm::SaturationPropsBasic::Linear,
    //                                        { 1000.0, 1000.0 },
    //                                        { 1.0, 1.0 },
    //                                        1.0, 1.0,
    //                                        grid.dimensions, grid.number_of_cells);
    const Opm::IncompPropertiesBasic props(2, Opm::SaturationPropsBasic::Linear,
                                           { 1000.0, 1000.0 },
                                           { 1.0, 30.0 },
                                           1.0, 1.0,
                                           grid.dimensions, grid.number_of_cells);
    V htrans(grid.cell_facepos[grid.number_of_cells]);
    tpfa_htrans_compute(const_cast<UnstructuredGrid*>(&grid), props.permeability(), htrans.data());
    V trans_all(grid.number_of_faces);
    // tpfa_trans_compute(const_cast<UnstructuredGrid*>(&grid), htrans.data(), trans_all.data());
    const int nc = grid.number_of_cells;
    std::vector<int> allcells(nc);
    for (int i = 0; i < nc; ++i) {
        allcells[i] = i;
    }
    std::cerr << "Opm core " << clock.secsSinceLast() << std::endl;

    // Define neighbourhood-derived operator matrices.
    const Opm::HelperOps ops(grid);
    const int num_internal = ops.internal_faces.size();
    std::cerr << "Topology matrices " << clock.secsSinceLast() << std::endl;

    typedef Opm::AutoDiffBlock<double> ADB;
    typedef ADB::V V;

    // q
    V q(nc);
    q.setZero();
    q[0] = 1.0;
    q[nc-1] = -1.0;

    // s0 - this is explicit now
    typedef Eigen::Array<double, Eigen::Dynamic, 2, Eigen::RowMajor> TwoCol;
    TwoCol s0(nc, 2);
    s0.leftCols<1>().setZero();
    s0.rightCols<1>().setOnes();

    // totmob - explicit as well
    TwoCol kr(nc, 2);
    props.relperm(nc, s0.data(), allcells.data(), kr.data(), 0);
    const V krw = kr.leftCols<1>();
    const V kro = kr.rightCols<1>();
    const double* mu = props.viscosity();
    const V totmob = krw/mu[0] + kro/mu[1];

    // Moved down here because we need total mobility.
    tpfa_eff_trans_compute(const_cast<UnstructuredGrid*>(&grid), totmob.data(),
                           htrans.data(), trans_all.data());
    // Still explicit, and no upwinding!
    V mobtransf(num_internal);
    for (int fi = 0; fi < num_internal; ++fi) {
        mobtransf[fi] = trans_all[ops.internal_faces[fi]];
    }
    std::cerr << "Property arrays " << clock.secsSinceLast() << std::endl;

    // Initial pressure.
    V p0(nc,1);
    p0.fill(200*Opm::unit::barsa);

    // First actual AD usage: defining pressure variable.
    const std::vector<int> bpat = { nc };
    // Could actually write { nc } instead of bpat below,
    // but we prefer a named variable since we will repeat it.
    const ADB p = ADB::variable(0, p0, bpat);
    const ADB ngradp = ops.ngrad*p;
    // We want flux = totmob*trans*(p_i - p_j) for the ij-face.
    const ADB flux = mobtransf*ngradp;
    const ADB residual = ops.div*flux - q;
    std::cerr << "Construct AD residual " << clock.secsSinceLast() << std::endl;

    // It's the residual we want to be zero. We know it's linear in p,
    // so we just need a single linear solve. Since we have formulated
    // ourselves with a residual and jacobian we do this with a single
    // Newton step (hopefully easy to extend later):
    //   p = p0 - J(p0) \ R(p0)
    // Where R(p0) and J(p0) are contained in residual.value() and
    // residual.derived()[0].

//.........这里部分代码省略.........
开发者ID:babrodtk,项目名称:opm-simulators,代码行数:101,代码来源:sim_simple.cpp


示例18: h

void h() {
  using namespace U; // Using directive
  using V::f; // Using declaration
  f(); // Calls V::f();
  U::f(); // Must fully qualify to call
}
开发者ID:archfp,项目名称:floorplan,代码行数:6,代码来源:UsingDeclaration1.cpp


示例19:

    ~SmartPointerListElement()
    {
        value.reset();

        prev = nullptr;
        next = nullptr;
    }
开发者ID:Xertz,项目名称:Vulkan,代码行数:7,代码来源:SmartPointerList.hpp


示例20: u

 J u()
 {
   for (int x = 0; x < e.s(); ++x)
     if (e[x])
       return J(e[x], this);
   return v();
 }
开发者ID:Akheon23,项目名称:chromecast-mirrored-source.toolchain,代码行数:7,代码来源:store-expr1.C



注:本文中的V类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ V1类代码示例发布时间:2022-05-31
下一篇:
C++ Uuid类代码示例发布时间:2022-05-31
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap