C++ _S_Plane类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中_S_Plane类的典型用法代码示例。如果您正苦于以下问题：C++ _S_Plane类的具体用法？C++ _S_Plane怎么用？C++ _S_Plane使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了_S_Plane类的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int main()
{
	system("clear");

	for(int i=0;i<2;i++) {
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],35,16);
	
	
	}

	map_init(&gPlayer);
	map_load(&gPlayer,"plane1.dat");
	
	Plane_init(&gPlayerObject,&gPlayer,17,10);
	
	set_conio_terminal_mode();
	acc_tick = last_tick = 0;

	while(bLoop) {

		//타이밍처리
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + (double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;

		//실시간입력	
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~\r");
			}
			//gPlayerObject.fpApply(&gPlayerObject,delta_tick,ch);
			gPlayerObject.fpApply(&gPlayerObject,delta_tick,ch);
		}

		//타이밍계산
		acc_tick += delta_tick;
		if(acc_tick > 0.1) {
			//puts("tick...\r");
			gotoxy(0,0);
			map_drawTile(&gScreenBuf[0],0,0,&gScreenBuf[1]);
			
			gPlayerObject.fpDraw(&gPlayerObject,&gScreenBuf[1]);
			//Plane_Draw(&gPlayerObject,&gScreenBuf[1]);

			map_dump(&gScreenBuf[1],Default_Tilepalete);
			acc_tick = 0;
		}
	}


	return 0;
}

开发者ID:dlawltjs，项目名称:gittest，代码行数:56，代码来源:ex8.c

示例2: getch

void *InputThread(void *arg)
{
	while(1)
	{
		if(kbhit() != 0 ) {

			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			}

			gPlayerObject.pfApply(&gPlayerObject,0,ch);

			_S_PACKET_REQ_SETPOS packet_setpos = {
				{1004,200,},0,
				gPlayerObject.m_fXpos,
				gPlayerObject.m_fYpos
			};
			if(send(socket_desc,
						&packet_setpos,
						sizeof(packet_setpos),0) < 0) {
				puts("send failed");
			}

		}

	}
	return NULL;
}

开发者ID:yeongeun0325，项目名称:cygwin，代码行数:30，代码来源:ex8.game.c

示例3: main

int main()
{	
	system("clear");

	for(int i=0;i<2;i++){
		map_init(&gScreenBuffer[i]);
		gScreenBuffer[i].fpnew(&gScreenBuffer[i],35,16);
		//map_new(&gScreenBuffer[i],35,16);
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"plane.dat");

	Plane_init(&gPlayerObject,&gPlayerModel,17,10);
	bullet_init(&gBulletObject,0,0,0,&gPlayerModel);

	map_init(&gBulletModel);
	map_load(&gBulletModel,"plasma.dat");

	bullet_init(&gBulletObject,0,0,0,&gBulletModel);
	
	set_conio_terminal_mode();
	acc_tick=last_tick=0;
	acc_bullet_delay_tick=0;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;
		//실시간 입력
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			}
			else if(ch=='j'){
				double bullet_posx=0;
				double bullet_posy=0;

				double target_posx=gPlayerObject.m_fXpos;
				double target_posy=gPlayerObject.m_fYpos;

				double vx=target_posx-bullet_posx;
				double vy=target_posy-bullet_posy;

				double dist=sqrt(vx*vx+vy*vy);

				vx/=dist; vy/=dist;

				gBulletObject.pfFire(&gBulletObject,bullet_posx,bullet_posy,10,vx,vy,10.0);
			}
			gPlayerObject.pfApply(&gPlayerObject,delta_tick,ch);
			//Plane_Apply(&gPlayerObject,delta_tick,ch);
		}

		acc_bullet_delay_tick+=delta_tick;
		if(acc_bullet_delay_tick>2.0){	//2초동안 방향설정

			acc_bullet_delay_tick=0;

			double bullet_posx=gBulletObject.m_fXpos;
			double bullet_posy=gBulletObject.m_fYpos;

			double target_posx=gPlayerObject.m_fXpos;
			double target_posy=gPlayerObject.m_fYpos;

			double vx=target_posx-bullet_posx;
			double vy=target_posy-bullet_posy;

			double dist=sqrt(vx*vx+vy*vy);

			vx/=dist; vy/=dist;

			gBulletObject.m_fvx=vx;
			gBulletObject.m_fvy=vy;
		}


		//apply위치
		gBulletObject.pfApply(&gBulletObject,delta_tick);
	
		//타이밍 계산 
		acc_tick += delta_tick;
		
		if(acc_tick > 0.1) {
			//puts("tick..\r");
			gotoxy(0,0);
			map_drawTile(&gScreenBuffer[0],0,0,&gScreenBuffer[1]);
			gPlayerObject.pfDraw(&gPlayerObject,&gScreenBuffer[1]);
			gBulletObject.pfDraw(&gBulletObject,&gScreenBuffer[1]);
			
			//Plane_Draw(&gPlayerObject,&gScreenBuffer[1]);
			map_dump(&gScreenBuffer[1],Default_Tilepalete);
			acc_tick = 0;
		}

//.........这里部分代码省略.........

开发者ID:yeongeun0325，项目名称:cygwin，代码行数:101，代码来源:ex2.c

示例4: main

/*=======================================================*/
int main()
{
    set_conio_terminal_mode();
	acc_tick = last_tick = 0;

 	while(bLoop) {
		// time process
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;

		// input
		if (nFSM == 0) {
			gameStart_Title(delta_tick);

		}
		else if (nFSM == 1) { 
			gameStart_Play();

		}

        if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			}
            else if (ch =='p') {  //laser
				double bullet_pos_x = gTestBulletObject.m_fXpos;
				double bullet_pos_y = gTestBulletObject.m_fYpos;
			
				double target_pos_x = gPlaneObject.m_fXpos;
				double target_pos_y = gPlaneObject.m_fYpos;

				double vx = target_pos_x - bullet_pos_x;
				double vy = target_pos_y - bullet_pos_y;
				double dist  = sqrt(vx*vx+vy*vy);
				vx /= dist;
				vy /= dist;

				gLaserObject.pfFire(&gLaserObject,
				gPlaneObject.m_fXpos,gPlaneObject.m_fYpos,
				-1,0,gPlaneObject.m_fYpos,15);

			}

			gPlaneObject.pfApply(&gPlaneObject,delta_tick,ch);

        }
        gTestAlienObject.pfApply(&gTestAlienObject,delta_tick);
		gTestBulletObject.pfApply(&gTestBulletObject,delta_tick);
		gLaserObject.pfApply(&gLaserObject,delta_tick);

		if (gTestBulletObject.m_nFSM != 0) {
			double bullet_pos_x = gTestBulletObject.m_fXpos;
			double bullet_pos_y = gTestBulletObject.m_fYpos;

			double target_pos_x = gPlaneObject.m_fXpos;
			double target_pos_y = gPlaneObject.m_fYpos;

			double vx = target_pos_x + bullet_pos_x;
			double vy = target_pos_y + bullet_pos_y;
			double dist  = sqrt(vx*vx+vy*vy);

			if(dist < 2) {
				gTestBulletObject.m_nFSM = 0;
				gPlaneObject.m_nFSM = 0;
				
			}

		}
        acc_tick += delta_tick;
		if(acc_tick > 0.1) {
			gotoxy(0,0);
			map_drawTile(&gScreenBuf[0],0,0,&gScreenBuf[1]);

			setColor(33,40);
			gPlaneObject.pfDraw(&gPlaneObject,&gScreenBuf[1]);
			gTestAlienObject.pfDraw(&gTestAlienObject,&gScreenBuf[1]);
			gTestBulletObject.pfDraw(&gTestBulletObject,&gScreenBuf[1]);
			gLaserObject.pfDraw(&gLaserObject,&gScreenBuf[1]);

			map_dump(&gScreenBuf[1],Default_Tilepalete);
			acc_tick = 0;
		}

     }

    return 0;

}

开发者ID:chaem，项目名称:test，代码行数:94，代码来源:game.c

示例5: main

int main()
{
	//srand((float)time(NULL)); //랜덤 함수
	
	for(int i=0;i<2;i++)
	{
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],40,25);
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"plane3.dat");

	map_init(&gBulletModel);
	map_load(&gBulletModel,"plasma1.dat");

	map_init(&gAlienModel);
	map_load(&gAlienModel,"alien1.dat");

	map_init(&gMissileModel);
	map_load(&gMissileModel,"missile.dat");

	map_init(&gFishModel);
	map_load(&gFishModel,"fish1.dat");

//비행기 init
	Plane_init(&gPlayerObject,&gPlayerModel,20,22);

	gPlayerObject.m_nFSM = 1;
	
//에일리언 총알 init
	for(int i=0;i< sizeof(gBulletObject)/sizeof(_S_BULLET_OBJECT) ;i++)
	{
		bullet_init(&gBulletObject[i],0,0,0,&gBulletModel);
		
	}

//비행기 총알 init
	for(int i=0;i< sizeof(gMissileObject)/sizeof(_S_BULLET_OBJECT) ;i++)
	{
		bullet_init(&gMissileObject[i],0,0,0,&gMissileModel);
		
	}

//에일리언 갯수와 위치
	double TablePosition1[] = {0,6.0,30.0,13.0};

	for(int i=0;i<4;i++)
	{
	
		_S_ALIEN_OBJECT *pObj = &gAlienObjects[i];
		alien_init(pObj,&gAlienModel);
		pObj->m_fXpos = TablePosition1[i];
		pObj->m_fYpos = 2;
		pObj->m_nFSM = 1;
		
		gAlienObjects[i].m_pBullet = &gBulletObject[i];
	}

//물고기 init
	//srand(time(NULL));
	double TablePosition2[] = {6.0,19.0,31.0};
	//double TablePosition3[] = {5.0,15.0};
	
	for(int i=0;i<3;i++) 
	{
		_S_FISH_OBJECT *pObj = &gFishObject[i];
		Fish_init(pObj,&gFishModel);
		pObj->m_fXpos = TablePosition2[i]; //rand() % 20; 랜덤값을 불러온다
		pObj->m_fYpos = 2;
		pObj->m_nFSM = 2;
		
		
	}
	

	set_conio_terminal_mode();
	acc_tick=last_tick=0;

	system("clear");

//플레이상태로 만들기
	gPlayerObject.m_nFSM = 1;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;
		//실시간 입력
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			} //비행기 총알
			else if(ch=='j') {
				for(int i=0;i<sizeof(gMissileObject)/sizeof(_S_BULLET_OBJECT);i++) {
//.........这里部分代码省略.........

开发者ID:tamjung00，项目名称:gittest，代码行数:101，代码来源:game_4.c

示例6: main

int main()
{
    set_conio_terminal_mode();
	acc_tick=last_tick=0;
	
    system("clear");

	for(int i =0;i<2;i++) //총알
	{
		map_init(&gScreenBuffer[i]);
		map_new(&gScreenBuffer[i],35,16);
	}

	
	map_init(&gPlayer);
	map_load(&gPlayer,"plane1.dat");

	Plane_init(&gPlayerObject,&gPlayer,17,10);

	double target_x,target_y;
	double center_x,center_y;
	center_x = 14;
	center_y = 7;
	
	target_x = 14;
	target_y = 3;
	
	double angle = 0;
	
	
	
	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;
		
		//실시간 입력
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			}
			//Plane_Apply(&gPlayerObject,delta_tick,ch);
            
            gPlayerObject.fpApply(&gPlayerObject,delta_tick,ch);
        }
         
         //apply 위치

		angle += (delta_tick * 45);
		double tx,ty;
		double rad = angle/180.0 * 3.141592;
		tx = (target_x - center_x) *cos(rad) - (target_y - center_y) * sin(rad);
		ty = (target_x - center_x) *sin(rad) - (target_y - center_y) * cos(rad);
		tx += center_x;
		ty += center_y;
		

        //타이밍 계산 
		acc_tick += delta_tick;
		if(acc_tick > 0.1) {
			//puts("tick...\r");
			gotoxy(0,0);
			//map_drawTile(&gScreenBuf[0],0,0,&gScreenBuf[1]);
			map_drawTile(&gScreenBuffer[0],0,0,&gScreenBuffer[1]);
			map_PutTile(&gScreenBuffer[1],tx,ty,2); 
            map_PutTile(&gScreenBuffer[1],center_x,center_y,5); 
			map_PutTile(&gScreenBuffer[1],target_x,target_y,1) ;
			
			gPlayerObject.fpDraw(&gPlayerObject,&gScreenBuffer[1]);

            //gotoxy(0,0);
			//Plane_Draw(&gPlayerObject,&gScreenBuf[1]);

			//map_dump(&gScreenBuf[1],Default_Tilepalete);
            map_dump(&gScreenBuffer[1],Default_Tilepalete);
            
			acc_tick = 0;
		}

	}

	
	return 0;

}

开发者ID:tamjung00，项目名称:gittest，代码行数:90，代码来源:ex10.c

示例7: main

int main()
{
	system("clear");

	for(int i=0;i<2;i++) {
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],35,16);
	
	
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"plane1.dat");

	map_init(&gBulletModel);
	map_load(&gBulletModel,"plasma.dat");
	
	Plane_init(&gPlayerObject,&gPlayerModel,17,10);
	bullet_init(&gTestBullet,0,0,0,&gBulletModel);

	set_conio_terminal_mode();
	acc_tick = last_tick = 0;

	//플레이상태로 만들기
	gPlayerObject.m_nFSM = 1;
	
	
	while(bLoop) {

		//타이밍처리
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + (double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;

		//실시간입력	
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~\r");
			}
			else if(ch == 'j') {
				
				double bullet_pos_x = 0;
				double bullet_pos_y = 0;

				double target_pos_x = gPlayerObject.m_fXpos;
				double target_pos_y = gPlayerObject.m_fYpos;

				double vx = target_pos_x - bullet_pos_x;
				double vy = target_pos_y - bullet_pos_y;
				double dist = sqrt(vx*vx+vy*vy);
				
				vx /= dist;
				vy /= dist;
				

				gTestBullet.pfFire(&gTestBullet,bullet_pos_x,bullet_pos_y,10.0,vx,vy,10);

			}

			gPlayerObject.pfApply(&gPlayerObject,delta_tick,ch);
		}
		gTestBullet.pfApply(&gTestBullet,delta_tick);

		if(gTestBullet.m_nFSM != 0) {
			double bullet_pos_x = gTestBullet.m_fXpos;
			double bullet_pos_y = gTestBullet.m_fYpos;

			double target_pos_x = gPlayerObject.m_fXpos;
			double target_pos_y = gPlayerObject.m_fYpos;

			double vx = target_pos_x - bullet_pos_x;
			double vy = target_pos_y - bullet_pos_y;
			double dist = sqrt(vx*vx+vy*vy);

			if(dist < 0.25) {
				gTestBullet.m_nFSM = 0;
				gPlayerObject.m_nFSM = 0;
	
			}

		}



		//타이밍계산
		acc_tick += delta_tick;
		if(acc_tick > 0.1) {
			//puts("tick...\r");
			gotoxy(0,0);
			map_drawTile(&gScreenBuf[0],0,0,&gScreenBuf[1]);
			gPlayerObject.pfDraw(&gPlayerObject,&gScreenBuf[1]);
			gTestBullet.pfDraw(&gTestBullet,&gScreenBuf[1]);
				
			map_dump(&gScreenBuf[1],Default_Tilepalete);
			acc_tick = 0;
		}
	}
//.........这里部分代码省略.........

开发者ID:dlawltjs，项目名称:gittest，代码行数:101，代码来源:ex3.c

示例8: main

int main()
{
	system("clear");

	for(int i=0;i<2;i++)
	{
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],35,30);
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"plane5.dat");


	map_init(&gBulletModel);
	map_load(&gBulletModel,"target5.dat");


	Plane_init(&gPlayerObject,&gPlayerModel,17,24);
	bullet_init(&gTestBullet,0,0,0,&gBulletModel);

	set_conio_terminal_mode();
	acc_tick=last_tick=0;

	gPlayerObject.m_nFSM = 1;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;
		//실시간입력	
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("Good bye~ \r");
			}
			else if (ch == 'j') {

				double vx,vy;
				gTestBullet.m_fXpos = 0;
				gTestBullet.m_fYpos = 0;
				getDirection(&gTestBullet,&gPlayerObject,&vx,&vy);
				gTestBullet.pfFire(&gTestBullet,
				gTestBullet.m_fXpos,
				gTestBullet.m_fYpos,
				10,vx,vy,10);
			}

			gPlayerObject.pfApply(&gPlayerObject,delta_tick,ch);
		}

		gTestBullet.pfApply(&gTestBullet,delta_tick);

		if(gTestBullet.m_nFSM != 0)	{
	
			double dist = getDistance(&gTestBullet,&gPlayerObject);

			if(dist < 2.0) {
				gTestBullet.m_nFSM = 0;
				gPlayerObject.m_nFSM = 0;
			}

		}


		//타이밍계산
		acc_tick += delta_tick;
		if(acc_tick > 0.1) {
			gotoxy(0,0);
			map_drawTile(&gScreenBuf[0],0,0,&gScreenBuf[1]);

			gPlayerObject.pfDraw(&gPlayerObject,&gScreenBuf[1]);
			gTestBullet.pfDraw(&gTestBullet,&gScreenBuf[1]);	

			map_dump(&gScreenBuf[1],Default_Tilepalete);
			acc_tick = 0;
		}
	}

	return 0;
}

开发者ID:Honggisun，项目名称:Hong_gittest，代码行数:85，代码来源:ex4.c

示例9: main

int main()
{

	for(int i=0;i<2;i++){
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],45,30);
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"plane1.dat");

	map_init(&gPlasmaModel);
	map_load(&gPlasmaModel,"plasma.dat");

	map_init(&gAlienModel);
	map_load(&gAlienModel,"alien.dat");

	map_init(&gPlaneBulletModel);
	map_load(&gPlaneBulletModel,"bullet1.dat");

	map_init(&gPotal);
	map_load(&gPotal,"potal.dat");

	map_init(&gPotalBulletModel);
	map_load(&gPotalBulletModel,"potal_bullet.dat");

	Plane_init(&gPlayerObject,&gPlayerModel,30,26);
	Potal_init(&gPlayerPotal,&gPotal,1,1);
	Potal_Bullet_init(&gPotalBulletObject,0,0,0,&gPotalBulletModel);

	gPlayerObject.m_nFSM=1;

	for(int i=0;i<sizeof(gPlaneBulletObjects)/sizeof(_S_BULLET_OBJECT);i++){
		bullet_init(&gPlaneBulletObjects[i],0,0,0,&gPlaneBulletModel);
	}

	for(int i=0;i<sizeof(gBulletObjects)/sizeof(_S_BULLET_OBJECT);i++){
		bullet_init(&gBulletObjects[i],0,0,0,&gPlasmaModel);
	}

	double TablePosition[]={0,10,20,30,40};

	for(int i=0;i<5;i++){
		_S_ALIEN_OBJECT *pObj=&gAlienObjects[i];
		alien_init(pObj,&gAlienModel);
		pObj->m_fXpos=TablePosition[i];
		pObj->m_fYpos=5;
		pObj->m_nFSM=1;
		gAlienObjects[i].m_pBullet=&gBulletObjects[i];

	}

	system("clear");

	set_conio_terminal_mode();
	acc_tick=last_tick=0;
	acc_guid_delay_tick=0;
	acc_bullet_delay_tick=0;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;

		//실시간 입력
		if(kbhit()!=0) {
			char ch = getch();
			if(ch=='q') {
				bLoop=0;
				puts("bye~ \r");
			}

			else if(ch=='j') {

				for(int i=0;i<sizeof(gPlaneBulletObjects)/sizeof(_S_BULLET_OBJECT);i++) {
					double vx,vy,c;

					vx=gAlienObjects[i].m_fXpos-gPlayerObject.m_fXpos;
					vy=gAlienObjects[i].m_fYpos-gPlayerObject.m_fYpos;
					c=sqrt(vx*vx+vy*vy);
					vx/=c;	vy/=c;

					_S_BULLET_OBJECT *pObj = &gPlaneBulletObjects[i];
					if(pObj->m_nFSM==0) { //슬립상태
						pObj->pfFire(pObj,gPlayerObject.m_fXpos,gPlayerObject.m_fYpos,10.0,vx,vy,10.0);
						break;
					}
				}

			}
			
			_S_Potal_Bullet_Object *pObj=&gPotalBulletObject;
			if(pObj->m_nFSM==0){
				double potal_bullet_posx=gPlayerPotal.m_nXpos;
				double potal_bullet_posy=gPlayerPotal.m_nYpos;

				double target_x=gPlayerObject.m_fXpos;
//.........这里部分代码省略.........

开发者ID:yeongeun0325，项目名称:cygwin，代码行数:101，代码来源:test.c

示例10: main

int main()
{

	for(int i=0;i<2;i++)
	{
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],35,35);
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"airplane.dat");
	
	map_init(&gBulletModel);
	map_load(&gBulletModel,"bullet1.dat");
	
	map_init(&gAlienModel);
	map_load(&gAlienModel,"tank1.dat");
	
	Plane_init(&gPlayerObject,&gPlayerModel,17,10);
	//bullet_init(&gBulletModel,0,0,0,&gBulletModel);
		
	gPlayerObject.m_nFSM = 1;

	double TablePosition[] = {0,8,16,24};
	
/*	for(int i=0;i<2;i++)
	{
		_S_BULLET_OBJECT *pObj = &gBulletObject[i];
		bullet_init(pObj,&gBulletObject[i];
		pObj->m_nFSM = 1;
	}
*/
	for(int i=0;i<4;i++)
	{
		_S_ALIEN_OBJECT *pObj = &gAlienObjects[i];
		alien_init(pObj,&gAlienModel);
		pObj->m_fXpos = TablePosition[i];
		pObj->m_fYpos = 2;
		pObj->m_nFSM = 1;
	}
/*	set_conio_terminal_mode();
	acc_tick=last_tick=0;

	int targetx,targety;

	int fire_x, fire_y;
*/
	
	system("clear");
	
	set_conio_terminal_mode();
	acc_tick=last_tick=0;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;
		//실시간 입력
		
/*		fire_x = gAlienObjects.m_nXpos;
		fire_y = gAlienObjects.m_nYpos;

		targetx = gPlayerObject.m_nXpos;
		targety = gPlayerObject.m_nypos;
*/	
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			}
/*			else if(ch == 'j') {
				double vx,vy,c;
				vx = targetx - fire_x;
				vy = targety - fire_y;
				c = sqrt(vx*vx+vy*vy);
				vx /= c;
				vy /= c;

				bullet_fire(&gBulletObject,fire_x,fire_y,10.0,vx,vy,10.0);
			
			}*/
		gPlayerObject.pfApply(&gPlayerObject,delta_tick,ch);
//		bullet_apply(&gBulletObject,delta_tick);
		}

		for(int i=0;i<4;i++ ) 
		{
			_S_ALIEN_OBJECT *pObj = &gAlienObjects[i];
			pObj->pfApply(pObj,delta_tick);

		}


		//타이밍 계산 
		acc_tick += delta_tick;
		if(acc_tick > 0.1) {
//.........这里部分代码省略.........

开发者ID:dldud，项目名称:gittest，代码行数:101，代码来源:game.c

示例11: main

int main()
{
	{
		int err = pthread_create(&tid,NULL,&InputThread,NULL);
		if(err != 0) {
			printf("err : %s \r\n",strerror(err));
		}
		else {
			printf("thread create success \r\n");
		}
	}

	struct sockaddr_in server;

	socket_desc = socket(AF_INET,SOCK_STREAM,0);
	if(socket_desc == -1)
	{
		puts("err create socket");
	}
	server.sin_addr.s_addr = inet_addr("127.0.0.1");
	server.sin_family = AF_INET;
	server.sin_port = htons(8080);
	if(connect(socket_desc,(struct sockaddr *)&server,sizeof(server)) < 0) {
		puts("connect error");
		return 1;
	}

	for(int i=0;i<2;i++)
	{
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],35,16);
	}

	map_init(&gPlayerModel);
	map_load(&gPlayerModel,"plane.dat");

	Plane_init(&gPlayerObject,&gPlayerModel,15,10);
	gPlayerObject.m_nFSM = 1;
	system("clear");

	set_conio_terminal_mode();
	acc_tick=last_tick=0;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;

		//타이밍 계산 
		acc_tick += delta_tick;
		if(acc_tick > 0.1) {
			gotoxy(0,0);
			map_drawTile(&gScreenBuf[0],0,0,&gScreenBuf[1]);
		
			gPlayerObject.pfDraw(&gPlayerObject,&gScreenBuf[1]);
			
			map_dump(&gScreenBuf[1],Default_Tilepalete);
			acc_tick = 0;
		}

	}

	return 0;

}

开发者ID:yeongeun0325，项目名称:cygwin，代码行数:68，代码来源:ex8.game.c

示例12: main

int main()
{

	system("clear");
	for(int i=0;i<10;i++)
	{
		map_init(&gScreenBuf[i]);
		map_new(&gScreenBuf[i],35,30);
	}
	map_init(&gPlaneModel);
	map_load(&gPlaneModel,"plane5.dat");


	map_init(&gAlienModel);
	map_load(&gAlienModel,"alien5.dat");

	map_init(&gPlasmaModel);
	map_load(&gPlasmaModel,"bullet5.dat");

	map_init(&gBulletModel);
	map_load(&gBulletModel,"bullet5.dat");


	Plane_init(&gTestPlaneObject,&gPlaneModel,17,25);
	

	gTestPlaneObject.m_nFSM = 1;

	double TablePosition[] = {0,3.0,6.0,9.0,12.0,15.0,18.0,21.0,24.0};

	for(int i=0;i< sizeof(gTestBulletObject)/sizeof(_S_BULLET_OBJECT); i++)
	{
		bullet_init(&gTestBulletObject[i],0,0,0,&gBulletModel);
	}
		for(int i=0;i< 10; i++)
	{
		bullet_init(&gTestBulletObject2[i],0,0,0,&gPlasmaModel);
	}
	
	
	for(int i=0;i<10;i++)
	{
		_S_ALIEN_OBJECT *pObj = &gTestAlienObject[i];
		alien_init(pObj,&gAlienModel,1,2);
		pObj->m_fXpos = TablePosition[i];
		pObj->m_fYpos = 3;
		pObj->m_nFSM = 1;
		gTestAlienObject[i].m_pBullet = &gTestBulletObject2[i];
	}


	set_conio_terminal_mode();
	acc_tick=last_tick=0;

	while(bLoop) {
		//타이밍처리 
		clock_gettime(CLOCK_MONOTONIC,&work_timer);
		double cur_tick = work_timer.tv_sec + 
			(double)(work_timer.tv_nsec * 1e-9);
		double delta_tick = cur_tick - last_tick;
		last_tick = cur_tick;
		//실시간 입력
		if(kbhit() != 0) {
			char ch = getch();
			if(ch == 'q') {
				bLoop = 0;
				puts("bye~ \r");
			}
			if(ch == 'j') {
				for(int i=0;i<sizeof(gTestBulletObject)/sizeof(_S_BULLET_OBJECT);i++) {
					_S_BULLET_OBJECT *pObj = &gTestBulletObject[i];
					if(pObj->m_nFSM == 0) { //슬립상태라면...
						pObj->pfFire(pObj,
								gTestPlaneObject.m_fXpos,
								gTestPlaneObject.m_fYpos,5,0,-2,10);
						break;
					}

				}
			}
		
			gTestPlaneObject.pfApply(&gTestPlaneObject,delta_tick,ch);
		}
	
		

		for(int i=0;i<sizeof(gTestBulletObject)/sizeof(_S_BULLET_OBJECT);i++) {
			_S_BULLET_OBJECT *pObj = &gTestBulletObject[i];
			pObj->pfApply(pObj,delta_tick);


		}
		for(int i=0;i<10;i++) {
			_S_ALIEN_OBJECT *pObj = &gTestAlienObject[i];
			pObj->pfApply(pObj,delta_tick);		
	
		}
		for(int i=0;i<10;i++) {
			gTestBulletObject2[i].pfApply(&gTestBulletObject2[i],delta_tick);
		
//.........这里部分代码省略.........

开发者ID:Honggisun，项目名称:Hong_gittest，代码行数:101，代码来源:ex8.c

注：本文中的_S_Plane类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ _Ty类代码示例发布时间：2022-05-31

C++ _RecordsetPtr类代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18259|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8177|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8548|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9388|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ _S_Plane类代码示例

示例1: main

示例2: getch

示例3: main

示例4: main

示例5: main

示例6: main

示例7: main

示例8: main

示例9: main

示例10: main

示例11: main

示例12: main

请发表评论

全部评论

上一篇：

下一篇：

微信小程序学习7--小程序架构分析

ufna/VaOceanMobile: Ocean shader created

armancodv/building-energy-model-matlab:

FGRibreau/import-tweets-to-mastodon: How

Delphi 2009 超前预知

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053