C++ btSliderConstraint类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中btSliderConstraint类的典型用法代码示例。如果您正苦于以下问题：C++ btSliderConstraint类的具体用法？C++ btSliderConstraint怎么用？C++ btSliderConstraint使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了btSliderConstraint类的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: btBoxShape


//.........这里部分代码省略.........

		pHinge2->setDbgDrawSize(btScalar(5.f));
	}


	{
		btCollisionShape* liftShape = new btBoxShape(btVector3(0.5f,2.0f,0.05f));
		m_collisionShapes.push_back(liftShape);
		btTransform liftTrans;
		m_liftStartPos = btVector3(0.0f, 2.5f, 3.05f);
		liftTrans.setIdentity();
		liftTrans.setOrigin(m_liftStartPos);
		m_liftBody = localCreateRigidBody(10,liftTrans, liftShape);

		btTransform localA, localB;
		localA.setIdentity();
		localB.setIdentity();
		localA.getBasis().setEulerZYX(0, M_PI_2, 0);
		localA.setOrigin(btVector3(0.0, 1.0, 3.05));
		localB.getBasis().setEulerZYX(0, M_PI_2, 0);
		localB.setOrigin(btVector3(0.0, -1.5, -0.05));
		m_liftHinge = new btHingeConstraint(*m_carChassis,*m_liftBody, localA, localB);
//		m_liftHinge->setLimit(-LIFT_EPS, LIFT_EPS);
		m_liftHinge->setLimit(0.0f, 0.0f);
		m_dynamicsWorld->addConstraint(m_liftHinge, true);

		btCollisionShape* forkShapeA = new btBoxShape(btVector3(1.0f,0.1f,0.1f));
		m_collisionShapes.push_back(forkShapeA);
		btCompoundShape* forkCompound = new btCompoundShape();
		m_collisionShapes.push_back(forkCompound);
		btTransform forkLocalTrans;
		forkLocalTrans.setIdentity();
		forkCompound->addChildShape(forkLocalTrans, forkShapeA);

		btCollisionShape* forkShapeB = new btBoxShape(btVector3(0.1f,0.02f,0.6f));
		m_collisionShapes.push_back(forkShapeB);
		forkLocalTrans.setIdentity();
		forkLocalTrans.setOrigin(btVector3(-0.9f, -0.08f, 0.7f));
		forkCompound->addChildShape(forkLocalTrans, forkShapeB);

		btCollisionShape* forkShapeC = new btBoxShape(btVector3(0.1f,0.02f,0.6f));
		m_collisionShapes.push_back(forkShapeC);
		forkLocalTrans.setIdentity();
		forkLocalTrans.setOrigin(btVector3(0.9f, -0.08f, 0.7f));
		forkCompound->addChildShape(forkLocalTrans, forkShapeC);

		btTransform forkTrans;
		m_forkStartPos = btVector3(0.0f, 0.6f, 3.2f);
		forkTrans.setIdentity();
		forkTrans.setOrigin(m_forkStartPos);
		m_forkBody = localCreateRigidBody(5, forkTrans, forkCompound);

		localA.setIdentity();
		localB.setIdentity();
		localA.getBasis().setEulerZYX(0, 0, M_PI_2);
		localA.setOrigin(btVector3(0.0f, -1.9f, 0.05f));
		localB.getBasis().setEulerZYX(0, 0, M_PI_2);
		localB.setOrigin(btVector3(0.0, 0.0, -0.1));
		m_forkSlider = new btSliderConstraint(*m_liftBody, *m_forkBody, localA, localB, true);
		m_forkSlider->setLowerLinLimit(0.1f);
		m_forkSlider->setUpperLinLimit(0.1f);
//		m_forkSlider->setLowerAngLimit(-LIFT_EPS);
//		m_forkSlider->setUpperAngLimit(LIFT_EPS);
		m_forkSlider->setLowerAngLimit(0.0f);
		m_forkSlider->setUpperAngLimit(0.0f);
		m_dynamicsWorld->addConstraint(m_forkSlider, true);


		btCompoundShape* loadCompound = new btCompoundShape();
		m_collisionShapes.push_back(loadCompound);
		btCollisionShape* loadShapeA = new btBoxShape(btVector3(2.0f,0.5f,0.5f));
		m_collisionShapes.push_back(loadShapeA);
		btTransform loadTrans;
		loadTrans.setIdentity();
		loadCompound->addChildShape(loadTrans, loadShapeA);
		btCollisionShape* loadShapeB = new btBoxShape(btVector3(0.1f,1.0f,1.0f));
		m_collisionShapes.push_back(loadShapeB);
		loadTrans.setIdentity();
		loadTrans.setOrigin(btVector3(2.1f, 0.0f, 0.0f));
		loadCompound->addChildShape(loadTrans, loadShapeB);
		btCollisionShape* loadShapeC = new btBoxShape(btVector3(0.1f,1.0f,1.0f));
		m_collisionShapes.push_back(loadShapeC);
		loadTrans.setIdentity();
		loadTrans.setOrigin(btVector3(-2.1f, 0.0f, 0.0f));
		loadCompound->addChildShape(loadTrans, loadShapeC);
		loadTrans.setIdentity();
		m_loadStartPos = btVector3(0.0f, 3.5f, 7.0f);
		loadTrans.setOrigin(m_loadStartPos);
		m_loadBody  = localCreateRigidBody(loadMass, loadTrans, loadCompound);
	}



	
	resetForklift();
	
//	setCameraDistance(26.f);

	m_guiHelper->autogenerateGraphicsObjects(m_dynamicsWorld);
}

开发者ID:Ochakko，项目名称:MameBake3D，代码行数:101，代码来源:Hinge2Vehicle.cpp

示例2: groundExtents


//.........这里部分代码省略.........

		btCollisionShape* forkShapeA = new btBoxShape(btVector3(1.0f,0.1f,0.1f));
		m_collisionShapes.push_back(forkShapeA);
		btCompoundShape* forkCompound = new btCompoundShape();
		m_collisionShapes.push_back(forkCompound);
		btTransform forkLocalTrans;
		forkLocalTrans.setIdentity();
		forkCompound->addChildShape(forkLocalTrans, forkShapeA);

		btCollisionShape* forkShapeB = new btBoxShape(btVector3(0.1f,0.02f,0.6f));
		m_collisionShapes.push_back(forkShapeB);
		forkLocalTrans.setIdentity();
		forkLocalTrans.setOrigin(btVector3(-0.9f, -0.08f, 0.7f));
		forkCompound->addChildShape(forkLocalTrans, forkShapeB);

		btCollisionShape* forkShapeC = new btBoxShape(btVector3(0.1f,0.02f,0.6f));
		m_collisionShapes.push_back(forkShapeC);
		forkLocalTrans.setIdentity();
		forkLocalTrans.setOrigin(btVector3(0.9f, -0.08f, 0.7f));
		forkCompound->addChildShape(forkLocalTrans, forkShapeC);

		btTransform forkTrans;
		m_forkStartPos = btVector3(0.0f, 0.6f, 3.2f);
		forkTrans.setIdentity();
		forkTrans.setOrigin(m_forkStartPos);
		m_forkBody = localCreateRigidBody(5, forkTrans, forkCompound);

		localA.setIdentity();
		localB.setIdentity();
		localA.getBasis().setEulerZYX(0, 0, M_PI_2);
		localA.setOrigin(btVector3(0.0f, -1.9f, 0.05f));
		localB.getBasis().setEulerZYX(0, 0, M_PI_2);
		localB.setOrigin(btVector3(0.0, 0.0, -0.1));
		m_forkSlider = new btSliderConstraint(*m_liftBody, *m_forkBody, localA, localB, true);
		m_forkSlider->setLowerLinLimit(0.1f);
		m_forkSlider->setUpperLinLimit(0.1f);
//		m_forkSlider->setLowerAngLimit(-LIFT_EPS);
//		m_forkSlider->setUpperAngLimit(LIFT_EPS);
		m_forkSlider->setLowerAngLimit(0.0f);
		m_forkSlider->setUpperAngLimit(0.0f);
		m_dynamicsWorld->addConstraint(m_forkSlider, true);


		btCompoundShape* loadCompound = new btCompoundShape();
		m_collisionShapes.push_back(loadCompound);
		btCollisionShape* loadShapeA = new btBoxShape(btVector3(2.0f,0.5f,0.5f));
		m_collisionShapes.push_back(loadShapeA);
		btTransform loadTrans;
		loadTrans.setIdentity();
		loadCompound->addChildShape(loadTrans, loadShapeA);
		btCollisionShape* loadShapeB = new btBoxShape(btVector3(0.1f,1.0f,1.0f));
		m_collisionShapes.push_back(loadShapeB);
		loadTrans.setIdentity();
		loadTrans.setOrigin(btVector3(2.1f, 0.0f, 0.0f));
		loadCompound->addChildShape(loadTrans, loadShapeB);
		btCollisionShape* loadShapeC = new btBoxShape(btVector3(0.1f,1.0f,1.0f));
		m_collisionShapes.push_back(loadShapeC);
		loadTrans.setIdentity();
		loadTrans.setOrigin(btVector3(-2.1f, 0.0f, 0.0f));
		loadCompound->addChildShape(loadTrans, loadShapeC);
		loadTrans.setIdentity();
		m_loadStartPos = btVector3(0.0f, 3.5f, 7.0f);
		loadTrans.setOrigin(m_loadStartPos);
		m_loadBody  = localCreateRigidBody(loadMass, loadTrans, loadCompound);
	}

开发者ID:MixerMovies，项目名称:RedShadow，代码行数:66，代码来源:ForkLiftDemo.cpp

示例3:

void Hinge2Vehicle::resetForklift()
{
	gVehicleSteering = 0.f;
	gBreakingForce = defaultBreakingForce;
	gEngineForce = 0.f;

	m_carChassis->setCenterOfMassTransform(btTransform::getIdentity());
	m_carChassis->setLinearVelocity(btVector3(0,0,0));
	m_carChassis->setAngularVelocity(btVector3(0,0,0));
	m_dynamicsWorld->getBroadphase()->getOverlappingPairCache()->cleanProxyFromPairs(m_carChassis->getBroadphaseHandle(),getDynamicsWorld()->getDispatcher());
#if 0
	if (m_vehicle)
	{
		m_vehicle->resetSuspension();
		for (int i=0;i<m_vehicle->getNumWheels();i++)
		{
			//synchronize the wheels with the (interpolated) chassis worldtransform
			m_vehicle->updateWheelTransform(i,true);
		}
	}
#endif
	btTransform liftTrans;
	liftTrans.setIdentity();
	liftTrans.setOrigin(m_liftStartPos);
	m_liftBody->activate();
	m_liftBody->setCenterOfMassTransform(liftTrans);
	m_liftBody->setLinearVelocity(btVector3(0,0,0));
	m_liftBody->setAngularVelocity(btVector3(0,0,0));

	btTransform forkTrans;
	forkTrans.setIdentity();
	forkTrans.setOrigin(m_forkStartPos);
	m_forkBody->activate();
	m_forkBody->setCenterOfMassTransform(forkTrans);
	m_forkBody->setLinearVelocity(btVector3(0,0,0));
	m_forkBody->setAngularVelocity(btVector3(0,0,0));

//	m_liftHinge->setLimit(-LIFT_EPS, LIFT_EPS);
	m_liftHinge->setLimit(0.0f, 0.0f);
	m_liftHinge->enableAngularMotor(false, 0, 0);

	
	m_forkSlider->setLowerLinLimit(0.1f);
	m_forkSlider->setUpperLinLimit(0.1f);
	m_forkSlider->setPoweredLinMotor(false);

	btTransform loadTrans;
	loadTrans.setIdentity();
	loadTrans.setOrigin(m_loadStartPos);
	m_loadBody->activate();
	m_loadBody->setCenterOfMassTransform(loadTrans);
	m_loadBody->setLinearVelocity(btVector3(0,0,0));
	m_loadBody->setAngularVelocity(btVector3(0,0,0));

}

开发者ID:Ochakko，项目名称:MameBake3D，代码行数:55，代码来源:Hinge2Vehicle.cpp

示例4: if

void Hinge2Vehicle::lockForkSlider(void)
{
	btScalar linDepth = m_forkSlider->getLinearPos();
	btScalar lowLim = m_forkSlider->getLowerLinLimit();
	btScalar hiLim = m_forkSlider->getUpperLinLimit();
	m_forkSlider->setPoweredLinMotor(false);
	if(linDepth <= lowLim)
	{
		m_forkSlider->setLowerLinLimit(lowLim);
		m_forkSlider->setUpperLinLimit(lowLim);
	}
	else if(linDepth > hiLim)
	{
		m_forkSlider->setLowerLinLimit(hiLim);
		m_forkSlider->setUpperLinLimit(hiLim);
	}
	else
	{
		m_forkSlider->setLowerLinLimit(linDepth);
		m_forkSlider->setUpperLinLimit(linDepth);
	}
	return;
} // Hinge2Vehicle::lockForkSlider()

开发者ID:Ochakko，项目名称:MameBake3D，代码行数:23，代码来源:Hinge2Vehicle.cpp

示例5: btDantzigSolver

void Hinge2Vehicle::specialKeyboard(int key, int x, int y)
{
#if 0
	if (key==GLUT_KEY_END)
		return;

	//	printf("key = %i x=%i y=%i\n",key,x,y);

	int state;
	state=glutGetModifiers();
	if (state & GLUT_ACTIVE_SHIFT) 
	{
		switch (key) 
			{
			case GLUT_KEY_LEFT : 
				{
				
					m_liftHinge->setLimit(-M_PI/16.0f, M_PI/8.0f);
					m_liftHinge->enableAngularMotor(true, -0.1, maxMotorImpulse);
					break;
				}
			case GLUT_KEY_RIGHT : 
				{
					
					m_liftHinge->setLimit(-M_PI/16.0f, M_PI/8.0f);
					m_liftHinge->enableAngularMotor(true, 0.1, maxMotorImpulse);
					break;
				}
			case GLUT_KEY_UP :
				{
					m_forkSlider->setLowerLinLimit(0.1f);
					m_forkSlider->setUpperLinLimit(3.9f);
					m_forkSlider->setPoweredLinMotor(true);
					m_forkSlider->setMaxLinMotorForce(maxMotorImpulse);
					m_forkSlider->setTargetLinMotorVelocity(1.0);
					break;
				}
			case GLUT_KEY_DOWN :
				{
					m_forkSlider->setLowerLinLimit(0.1f);
					m_forkSlider->setUpperLinLimit(3.9f);
					m_forkSlider->setPoweredLinMotor(true);
					m_forkSlider->setMaxLinMotorForce(maxMotorImpulse);
					m_forkSlider->setTargetLinMotorVelocity(-1.0);
					break;
				}

			default:
				DemoApplication::specialKeyboard(key,x,y);
				break;
			}

	} else
	{
			switch (key) 
			{
			case GLUT_KEY_LEFT : 
				{
					gVehicleSteering += steeringIncrement;
					if (	gVehicleSteering > steeringClamp)
						gVehicleSteering = steeringClamp;

					break;
				}
			case GLUT_KEY_RIGHT : 
				{
					gVehicleSteering -= steeringIncrement;
					if (	gVehicleSteering < -steeringClamp)
						gVehicleSteering = -steeringClamp;

					break;
				}
			case GLUT_KEY_UP :
				{
					gEngineForce = maxEngineForce;
					gBreakingForce = 0.f;
					break;
				}
			case GLUT_KEY_DOWN :
				{
					gEngineForce = -maxEngineForce;
					gBreakingForce = 0.f;
					break;
				}

			case GLUT_KEY_F7:
				{
					btDiscreteDynamicsWorld* world = (btDiscreteDynamicsWorld*)m_dynamicsWorld;
					world->setLatencyMotionStateInterpolation(!world->getLatencyMotionStateInterpolation());
					printf("world latencyMotionStateInterpolation = %d\n", world->getLatencyMotionStateInterpolation());
					break;
				}
			case GLUT_KEY_F6:
				{
					//switch solver (needs demo restart)
					useMCLPSolver = !useMCLPSolver;
					printf("switching to useMLCPSolver = %d\n", useMCLPSolver);

					delete m_solver;
					if (useMCLPSolver)
//.........这里部分代码省略.........

开发者ID:Ochakko，项目名称:MameBake3D，代码行数:101，代码来源:Hinge2Vehicle.cpp

注：本文中的btSliderConstraint类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ btSolverBody类代码示例发布时间：2022-05-31

C++ btRigidBody类代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8456|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7862|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ btSliderConstraint类代码示例

示例1: btBoxShape

示例2: groundExtents

示例3:

示例4: if

示例5: btDantzigSolver

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

ceejbot/LOUDBOT: AUTOMATED SHOUTING FOR

CVE-2022-29834

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053