C++ dependent类代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中dependent类的典型用法代码示例。如果您正苦于以下问题：C++ dependent类的具体用法？C++ dependent怎么用？C++ dependent使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了dependent类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: memberFunctionCalled

// Checks to see that non-const member functions are not called on the container
// object.
// These could be conceivably allowed with a lower required confidence level.
void memberFunctionCalled() {
  for (int i = 0; i < v.size(); ++i) {
    sum += v[i];
    v.foo();
  }

  for (int i = 0; i < v.size(); ++i) {
    sum += v[i];
    dependent<int>::iterator it = v.begin();
  }
}

开发者ID:309972460，项目名称:software，代码行数:14，代码来源:negative-pseudoarray-extra.cpp

示例2: constRef

void constRef(const dependent<int>& ConstVRef) {
  int sum = 0;
  // FIXME: This does not work with size_t (probably due to the implementation
  // of dependent); make dependent work exactly like a std container type.
  for (int i = 0; i < ConstVRef.size(); ++i) {
    sum += ConstVRef[i];
  }
  // CHECK-MESSAGES: :[[@LINE-3]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : ConstVRef)
  // CHECK-FIXES-NEXT: sum += Elem;

  for (auto I = ConstVRef.begin(), E = ConstVRef.end(); I != E; ++I) {
    sum += *I;
  }
  // CHECK-MESSAGES: :[[@LINE-3]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : ConstVRef)
  // CHECK-FIXES-NEXT: sum += Elem;
}

开发者ID:krzysztofjanski，项目名称:clang-tools-extra，代码行数:18，代码来源:modernize-loop-convert-basic.cpp

示例3: multipleContainers

// Checks for multiple containers being indexed container.
void multipleContainers() {
  dependent<int> badArr;

  for (int i = 0; i < v.size(); ++i)
    sum += v[i] + badArr[i];

  for (int i = 0; i < v.size(); ++i)
    sum += badArr[i];

  for (int i = 0; i < v.size(); ++i) {
    int k = badArr[i];
    sum += k + 2;
  }

  for (int i = 0; i < v.size(); ++i) {
    int k = badArr[i];
    sum += v[i] + k;
  }
}

开发者ID:309972460，项目名称:software，代码行数:20，代码来源:negative-pseudoarray.cpp

示例4: aliasing

void aliasing() {
  // If the loop container is only used for a declaration of a temporary
  // variable to hold each element, we can name the new variable for the
  // converted range-based loop as the temporary variable's name.

  // In the following case, "t" is used as a temporary variable to hold each
  // element, and thus we consider the name "t" aliased to the loop.
  // The extra blank braces are left as a placeholder for after the variable
  // declaration is deleted.
  for (int i = 0; i < N; ++i) {
    Val &t = Arr[i];
    {}
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & t : Arr)
  // CHECK-FIXES-NOT: Val &{{[a-z_]+}} =
  // CHECK-FIXES: {}
  // CHECK-FIXES-NEXT: int y = t.x;

  // The container was not only used to initialize a temporary loop variable for
  // the container's elements, so we do not alias the new loop variable.
  for (int i = 0; i < N; ++i) {
    Val &t = Arr[i];
    int y = t.x;
    int z = Arr[i].x + t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : Arr)
  // CHECK-FIXES-NEXT: Val &t = elem;
  // CHECK-FIXES-NEXT: int y = t.x;
  // CHECK-FIXES-NEXT: int z = elem.x + t.x;

  for (int i = 0; i < N; ++i) {
    Val t = Arr[i];
    int y = t.x;
    int z = Arr[i].x + t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : Arr)
  // CHECK-FIXES-NEXT: Val t = elem;
  // CHECK-FIXES-NEXT: int y = t.x;
  // CHECK-FIXES-NEXT: int z = elem.x + t.x;

  // The same for pseudo-arrays like std::vector<T> (or here dependent<Val>)
  // which provide a subscript operator[].
  for (int i = 0; i < v.size(); ++i) {
    Val &t = v[i];
    {}
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & t : v)
  // CHECK-FIXES: {}
  // CHECK-FIXES-NEXT: int y = t.x;

  // The same with a call to at()
  for (int i = 0; i < pv->size(); ++i) {
    Val &t = pv->at(i);
    {}
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & t : *pv)
  // CHECK-FIXES: {}
  // CHECK-FIXES-NEXT: int y = t.x;

  for (int i = 0; i < N; ++i) {
    Val &t = func(Arr[i]);
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : Arr)
  // CHECK-FIXES-NEXT: Val &t = func(elem);
  // CHECK-FIXES-NEXT: int y = t.x;

  int IntArr[N];
  for (unsigned i = 0; i < N; ++i) {
    if (int alias = IntArr[i]) {
      sideEffect(alias);
    }
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto alias : IntArr)
  // CHECK-FIXES-NEXT: if (alias)

  for (unsigned i = 0; i < N; ++i) {
    while (int alias = IntArr[i]) {
      sideEffect(alias);
    }
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto alias : IntArr)
  // CHECK-FIXES-NEXT: while (alias)

  for (unsigned i = 0; i < N; ++i) {
    switch (int alias = IntArr[i]) {
    default:
      sideEffect(alias);
    }
//.........这里部分代码省略.........

开发者ID:urho3d，项目名称:clang-tools-extra，代码行数:101，代码来源:modernize-loop-convert-extra.cpp

示例5: sideEffect

namespace NamingAlias {

const int N = 10;

Val Arr[N];
dependent<Val> v;
dependent<Val> *pv;
Val &func(Val &);
void sideEffect(int);

void aliasing() {
  // If the loop container is only used for a declaration of a temporary
  // variable to hold each element, we can name the new variable for the
  // converted range-based loop as the temporary variable's name.

  // In the following case, "t" is used as a temporary variable to hold each
  // element, and thus we consider the name "t" aliased to the loop.
  // The extra blank braces are left as a placeholder for after the variable
  // declaration is deleted.
  for (int i = 0; i < N; ++i) {
    Val &t = Arr[i];
    {}
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & t : Arr)
  // CHECK-FIXES-NOT: Val &{{[a-z_]+}} =
  // CHECK-FIXES: {}
  // CHECK-FIXES-NEXT: int y = t.x;

  // The container was not only used to initialize a temporary loop variable for
  // the container's elements, so we do not alias the new loop variable.
  for (int i = 0; i < N; ++i) {
    Val &t = Arr[i];
    int y = t.x;
    int z = Arr[i].x + t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : Arr)
  // CHECK-FIXES-NEXT: Val &t = elem;
  // CHECK-FIXES-NEXT: int y = t.x;
  // CHECK-FIXES-NEXT: int z = elem.x + t.x;

  for (int i = 0; i < N; ++i) {
    Val t = Arr[i];
    int y = t.x;
    int z = Arr[i].x + t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : Arr)
  // CHECK-FIXES-NEXT: Val t = elem;
  // CHECK-FIXES-NEXT: int y = t.x;
  // CHECK-FIXES-NEXT: int z = elem.x + t.x;

  // The same for pseudo-arrays like std::vector<T> (or here dependent<Val>)
  // which provide a subscript operator[].
  for (int i = 0; i < v.size(); ++i) {
    Val &t = v[i];
    {}
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & t : v)
  // CHECK-FIXES: {}
  // CHECK-FIXES-NEXT: int y = t.x;

  // The same with a call to at()
  for (int i = 0; i < pv->size(); ++i) {
    Val &t = pv->at(i);
    {}
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & t : *pv)
  // CHECK-FIXES: {}
  // CHECK-FIXES-NEXT: int y = t.x;

  for (int i = 0; i < N; ++i) {
    Val &t = func(Arr[i]);
    int y = t.x;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : Arr)
  // CHECK-FIXES-NEXT: Val &t = func(elem);
  // CHECK-FIXES-NEXT: int y = t.x;

  int IntArr[N];
  for (unsigned i = 0; i < N; ++i) {
    if (int alias = IntArr[i]) {
      sideEffect(alias);
    }
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto alias : IntArr)
  // CHECK-FIXES-NEXT: if (alias)

  for (unsigned i = 0; i < N; ++i) {
    while (int alias = IntArr[i]) {
      sideEffect(alias);
    }
//.........这里部分代码省略.........

开发者ID:urho3d，项目名称:clang-tools-extra，代码行数:101，代码来源:modernize-loop-convert-extra.cpp

示例6: aliasing

void aliasing() {
  // If the loop container is only used for a declaration of a temporary
  // variable to hold each element, we can name the new variable for the
  // converted range-based loop as the temporary variable's name.

  // In the following case, "T" is used as a temporary variable to hold each
  // element, and thus we consider the name "T" aliased to the loop.
  // The extra blank braces are left as a placeholder for after the variable
  // declaration is deleted.
  for (int I = 0; I < N; ++I) {
    Val &T = Arr[I];
    {}
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & T : Arr)
  // CHECK-FIXES-NOT: Val &{{[a-z_]+}} =
  // CHECK-FIXES-NEXT: {}
  // CHECK-FIXES-NEXT: int Y = T.X;

  // The container was not only used to initialize a temporary loop variable for
  // the container's elements, so we do not alias the new loop variable.
  for (int I = 0; I < N; ++I) {
    Val &T = Arr[I];
    int Y = T.X;
    int Z = Arr[I].X + T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & I : Arr)
  // CHECK-FIXES-NEXT: Val &T = I;
  // CHECK-FIXES-NEXT: int Y = T.X;
  // CHECK-FIXES-NEXT: int Z = I.X + T.X;

  for (int I = 0; I < N; ++I) {
    Val T = Arr[I];
    int Y = T.X;
    int Z = Arr[I].X + T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & I : Arr)
  // CHECK-FIXES-NEXT: Val T = I;
  // CHECK-FIXES-NEXT: int Y = T.X;
  // CHECK-FIXES-NEXT: int Z = I.X + T.X;

  // The same for pseudo-arrays like std::vector<T> (or here dependent<Val>)
  // which provide a subscript operator[].
  for (int I = 0; I < V.size(); ++I) {
    Val &T = V[I];
    {}
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & T : V)
  // CHECK-FIXES-NEXT: {}
  // CHECK-FIXES-NEXT: int Y = T.X;

  // The same with a call to at()
  for (int I = 0; I < Pv->size(); ++I) {
    Val &T = Pv->at(I);
    {}
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & T : *Pv)
  // CHECK-FIXES-NEXT: {}
  // CHECK-FIXES-NEXT: int Y = T.X;

  for (int I = 0; I < N; ++I) {
    Val &T = func(Arr[I]);
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & I : Arr)
  // CHECK-FIXES-NEXT: Val &T = func(I);
  // CHECK-FIXES-NEXT: int Y = T.X;

  int IntArr[N];
  for (unsigned I = 0; I < N; ++I) {
    if (int Alias = IntArr[I]) {
      sideEffect(Alias);
    }
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Alias : IntArr)
  // CHECK-FIXES-NEXT: if (Alias)

  for (unsigned I = 0; I < N; ++I) {
    while (int Alias = IntArr[I]) {
      sideEffect(Alias);
    }
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Alias : IntArr)
  // CHECK-FIXES-NEXT: while (Alias)

  for (unsigned I = 0; I < N; ++I) {
    switch (int Alias = IntArr[I]) {
    default:
      sideEffect(Alias);
    }
//.........这里部分代码省略.........

开发者ID:berenm，项目名称:swang，代码行数:101，代码来源:modernize-loop-convert-extra.cpp

示例7: sideEffect

namespace NamingAlias {

const int N = 10;

Val Arr[N];
dependent<Val> V;
dependent<Val> *Pv;
Val &func(Val &);
void sideEffect(int);

void aliasing() {
  // If the loop container is only used for a declaration of a temporary
  // variable to hold each element, we can name the new variable for the
  // converted range-based loop as the temporary variable's name.

  // In the following case, "T" is used as a temporary variable to hold each
  // element, and thus we consider the name "T" aliased to the loop.
  // The extra blank braces are left as a placeholder for after the variable
  // declaration is deleted.
  for (int I = 0; I < N; ++I) {
    Val &T = Arr[I];
    {}
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & T : Arr)
  // CHECK-FIXES-NOT: Val &{{[a-z_]+}} =
  // CHECK-FIXES-NEXT: {}
  // CHECK-FIXES-NEXT: int Y = T.X;

  // The container was not only used to initialize a temporary loop variable for
  // the container's elements, so we do not alias the new loop variable.
  for (int I = 0; I < N; ++I) {
    Val &T = Arr[I];
    int Y = T.X;
    int Z = Arr[I].X + T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & I : Arr)
  // CHECK-FIXES-NEXT: Val &T = I;
  // CHECK-FIXES-NEXT: int Y = T.X;
  // CHECK-FIXES-NEXT: int Z = I.X + T.X;

  for (int I = 0; I < N; ++I) {
    Val T = Arr[I];
    int Y = T.X;
    int Z = Arr[I].X + T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & I : Arr)
  // CHECK-FIXES-NEXT: Val T = I;
  // CHECK-FIXES-NEXT: int Y = T.X;
  // CHECK-FIXES-NEXT: int Z = I.X + T.X;

  // The same for pseudo-arrays like std::vector<T> (or here dependent<Val>)
  // which provide a subscript operator[].
  for (int I = 0; I < V.size(); ++I) {
    Val &T = V[I];
    {}
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & T : V)
  // CHECK-FIXES-NEXT: {}
  // CHECK-FIXES-NEXT: int Y = T.X;

  // The same with a call to at()
  for (int I = 0; I < Pv->size(); ++I) {
    Val &T = Pv->at(I);
    {}
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & T : *Pv)
  // CHECK-FIXES-NEXT: {}
  // CHECK-FIXES-NEXT: int Y = T.X;

  for (int I = 0; I < N; ++I) {
    Val &T = func(Arr[I]);
    int Y = T.X;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & I : Arr)
  // CHECK-FIXES-NEXT: Val &T = func(I);
  // CHECK-FIXES-NEXT: int Y = T.X;

  int IntArr[N];
  for (unsigned I = 0; I < N; ++I) {
    if (int Alias = IntArr[I]) {
      sideEffect(Alias);
    }
  }
  // CHECK-MESSAGES: :[[@LINE-5]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Alias : IntArr)
  // CHECK-FIXES-NEXT: if (Alias)

  for (unsigned I = 0; I < N; ++I) {
    while (int Alias = IntArr[I]) {
      sideEffect(Alias);
    }
//.........这里部分代码省略.........

开发者ID:berenm，项目名称:swang，代码行数:101，代码来源:modernize-loop-convert-extra.cpp

示例8: noContainer

// Check for loops that don't mention containers
void noContainer() {
  for (auto i = 0; i < v.size(); ++i) { }
  // CHECK: for (auto & elem : v) { }

  for (auto i = 0; i < v.size(); ++i) ;
  // CHECK: for (auto & elem : v) ;
}

开发者ID:aleguna，项目名称:llvm-project，代码行数:8，代码来源:pseudoarray.cpp

示例9: noContainer

// Check for loops that don't mention containers.
void noContainer() {
  for (auto I = 0; I < V.size(); ++I) {
  }

  for (auto I = 0; I < V.size(); ++I)
    ;
}

开发者ID:krzysztofjanski，项目名称:clang-tools-extra，代码行数:8，代码来源:modernize-loop-convert-basic.cpp

示例10: noContainer

// Check for loops that don't mention containers.
void noContainer() {
  for (auto i = 0; i < v.size(); ++i) {
  }

  for (auto i = 0; i < v.size(); ++i)
    ;
}

开发者ID:urho3d，项目名称:clang-tools-extra，代码行数:8，代码来源:modernize-loop-convert-basic.cpp

示例11: increment

// Checks for invalid increment steps:
void increment() {
  for (int i = 0; i < v.size(); --i)
    sum += v[i];

  for (int i = 0; i < v.size(); i)
    sum += v[i];

  for (int i = 0; i < v.size();)
    sum += v[i];

  for (int i = 0; i < v.size(); i += 2)
    sum ++;
}

开发者ID:309972460，项目名称:software，代码行数:14，代码来源:negative-pseudoarray.cpp

示例12: f

void f() {
  int sum = 0;
  for (int i = 0, e = v.size(); i < e; ++i) {
    printf("Fibonacci number is %d\n", v[i]);
    sum += v[i] + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : v)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", elem);
  // CHECK-FIXES-NEXT: sum += elem + 2;

  for (int i = 0, e = v.size(); i < e; ++i) {
    printf("Fibonacci number is %d\n", v.at(i));
    sum += v.at(i) + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : v)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", elem);
  // CHECK-FIXES-NEXT: sum += elem + 2;

  for (int i = 0, e = pv->size(); i < e; ++i) {
    printf("Fibonacci number is %d\n", pv->at(i));
    sum += pv->at(i) + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : *pv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", elem);
  // CHECK-FIXES-NEXT: sum += elem + 2;

  // This test will fail if size() isn't called repeatedly, since it
  // returns unsigned int, and 0 is deduced to be signed int.
  // FIXME: Insert the necessary explicit conversion, or write out the types
  // explicitly.
  for (int i = 0; i < pv->size(); ++i) {
    printf("Fibonacci number is %d\n", (*pv).at(i));
    sum += (*pv)[i] + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : *pv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", elem);
  // CHECK-FIXES-NEXT: sum += elem + 2;

  for (int i = 0; i < cv->size(); ++i) {
    printf("Fibonacci number is %d\n", cv->at(i));
    sum += cv->at(i) + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (auto & elem : *cv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", elem);
  // CHECK-FIXES-NEXT: sum += elem + 2;
}

开发者ID:nick-schultz，项目名称:clang-tools-extra，代码行数:51，代码来源:modernize-loop-convert-basic.cpp

示例13: f

void f() {
  int Sum = 0;
  for (int I = 0, E = V.size(); I < E; ++I) {
    printf("Fibonacci number is %d\n", V[I]);
    Sum += V[I] + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : V)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem);
  // CHECK-FIXES-NEXT: Sum += Elem + 2;

  for (int I = 0, E = V.size(); I < E; ++I) {
    printf("Fibonacci number is %d\n", V.at(I));
    Sum += V.at(I) + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : V)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem);
  // CHECK-FIXES-NEXT: Sum += Elem + 2;

  for (int I = 0, E = Pv->size(); I < E; ++I) {
    printf("Fibonacci number is %d\n", Pv->at(I));
    Sum += Pv->at(I) + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : *Pv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem);
  // CHECK-FIXES-NEXT: Sum += Elem + 2;

  // This test will fail if size() isn't called repeatedly, since it
  // returns unsigned int, and 0 is deduced to be signed int.
  // FIXME: Insert the necessary explicit conversion, or write out the types
  // explicitly.
  for (int I = 0; I < Pv->size(); ++I) {
    printf("Fibonacci number is %d\n", (*Pv).at(I));
    Sum += (*Pv)[I] + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : *Pv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem);
  // CHECK-FIXES-NEXT: Sum += Elem + 2;

  for (int I = 0; I < Cv->size(); ++I) {
    printf("Fibonacci number is %d\n", Cv->at(I));
    Sum += Cv->at(I) + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (int Elem : *Cv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem);
  // CHECK-FIXES-NEXT: Sum += Elem + 2;
}

开发者ID:krzysztofjanski，项目名称:clang-tools-extra，代码行数:51，代码来源:modernize-loop-convert-basic.cpp

示例14: mixedVariables

// Checks for incorrect loop variables.
void mixedVariables() {
  int badIndex;
  for (int i = 0; badIndex < v.size(); ++i)
    sum += v[i];

  for (int i = 0; i < v.size(); ++badIndex)
    sum += v[i];

  for (int i = 0; badIndex < v.size(); ++badIndex)
    sum += v[i];

  for (int i = 0; badIndex < v.size(); ++badIndex)
    sum += v[badIndex];
}

开发者ID:309972460，项目名称:software，代码行数:15，代码来源:negative-pseudoarray.cpp

示例15: indexStartAndEnd

// Checks for the index start and end:
void indexStartAndEnd() {
  for (int i = 0; i < v.size() + 1; ++i)
    sum += v[i];

  for (int i = 0; i < v.size() - 1; ++i)
    sum += v[i];

  for (int i = 1; i < v.size(); ++i)
    sum += v[i];

  for (int i = 1; i < v.size(); ++i)
    sum += v[i];

  for (int i = 0; ; ++i)
    sum += (*pv)[i];
}

开发者ID:309972460，项目名称:software，代码行数:17，代码来源:negative-pseudoarray.cpp

示例16: multipleArrays

// Checks for an array indexed in addition to the container.
void multipleArrays() {
  int badArr[N];

  for (int i = 0; i < v.size(); ++i)
    sum += v[i] + badArr[i];

  for (int i = 0; i < v.size(); ++i)
    sum += badArr[i];

  for (int i = 0; i < v.size(); ++i) {
    int k = badArr[i];
    sum += k + 2;
  }

  for (int i = 0; i < v.size(); ++i) {
    int k = badArr[i];
    sum += v[i] + k;
  }
}

开发者ID:309972460，项目名称:software，代码行数:20，代码来源:negative-pseudoarray.cpp

示例17: constness

// Ensure that 'const auto &' is used with containers of non-trivial types.
void constness() {
  int Sum = 0;
  for (int I = 0, E = Constv.size(); I < E; ++I) {
    printf("Fibonacci number is %d\n", Constv[I].X);
    Sum += Constv[I].X + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (const auto & Elem : Constv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem.X);
  // CHECK-FIXES-NEXT: Sum += Elem.X + 2;

  for (int I = 0, E = Constv.size(); I < E; ++I) {
    printf("Fibonacci number is %d\n", Constv.at(I).X);
    Sum += Constv.at(I).X + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (const auto & Elem : Constv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem.X);
  // CHECK-FIXES-NEXT: Sum += Elem.X + 2;

  for (int I = 0, E = Pconstv->size(); I < E; ++I) {
    printf("Fibonacci number is %d\n", Pconstv->at(I).X);
    Sum += Pconstv->at(I).X + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (const auto & Elem : *Pconstv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem.X);
  // CHECK-FIXES-NEXT: Sum += Elem.X + 2;

  // This test will fail if size() isn't called repeatedly, since it
  // returns unsigned int, and 0 is deduced to be signed int.
  // FIXME: Insert the necessary explicit conversion, or write out the types
  // explicitly.
  for (int I = 0; I < Pconstv->size(); ++I) {
    printf("Fibonacci number is %d\n", (*Pconstv).at(I).X);
    Sum += (*Pconstv)[I].X + 2;
  }
  // CHECK-MESSAGES: :[[@LINE-4]]:3: warning: use range-based for loop instead
  // CHECK-FIXES: for (const auto & Elem : *Pconstv)
  // CHECK-FIXES-NEXT: printf("Fibonacci number is %d\n", Elem.X);
  // CHECK-FIXES-NEXT: Sum += Elem.X + 2;
}

开发者ID:krzysztofjanski，项目名称:clang-tools-extra，代码行数:43，代码来源:modernize-loop-convert-basic.cpp

示例18: loops

  void loops() {
    for (int I = 0; I < N; ++I) {
      printf("%d\n", Ints[I]);
    }
    // CHECK-MESSAGES: :[[@LINE-3]]:5: warning: use range-based for loop instead
    // CHECK-FIXES: for (int Int : Ints)
    // CHECK-FIXES-NEXT: printf("%d\n", Int);

    for (int I = 0; I < N; ++I) {
      printf("%d\n", Ints_[I]);
    }
    // CHECK-MESSAGES: :[[@LINE-3]]:5: warning: use range-based for loop instead
    // CHECK-FIXES: for (int Int : Ints_)
    // CHECK-FIXES-NEXT: printf("%d\n", Int);

    for (int I = 0; I < DInts.size(); ++I) {
      printf("%d\n", DInts[I]);
    }
    // CHECK-MESSAGES: :[[@LINE-3]]:5: warning: use range-based for loop instead
    // CHECK-FIXES: for (int DInt : DInts)
    // CHECK-FIXES-NEXT: printf("%d\n", DInt);
  }

开发者ID:berenm，项目名称:swang，代码行数:22，代码来源:modernize-loop-convert-extra.cpp

示例19: indexUse

// Checks to make sure that the index isn't used outside of the container:
void indexUse() {
  for (int i = 0; i < v.size(); ++i)
    v[i] += 1 + i;
}

开发者ID:309972460，项目名称:software，代码行数:5，代码来源:negative-pseudoarray.cpp

示例20: wrongEnd

void wrongEnd() {
  int bad;
  for (int i = 0, e = v.size(); i < bad; ++i)
    sum += v[i];
}

开发者ID:309972460，项目名称:software，代码行数:5，代码来源:negative-pseudoarray.cpp

注：本文中的dependent类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ deque类代码示例发布时间：2022-05-31

C++ dense_bitset类代码示例发布时间：2022-05-31

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18257|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9673|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8175|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8547|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8455|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9387|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8427|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7861|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8411|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7394|2022-11-06

客服电话

电子邮件

C++ dependent类代码示例

示例1: memberFunctionCalled

示例2: constRef

示例3: multipleContainers

示例4: aliasing

示例5: sideEffect

示例6: aliasing

示例7: sideEffect

示例8: noContainer

示例9: noContainer

示例10: noContainer

示例11: increment

示例12: f

示例13: f

示例14: mixedVariables

示例15: indexStartAndEnd

示例16: multipleArrays

示例17: constness

示例18: loops

示例19: indexUse

示例20: wrongEnd

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

颜的笔顺,诠释颜的笔画,聊聊颜的部首

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053