• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    迪恩网络公众号

C++ base::Writer类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中base::Writer的典型用法代码示例。如果您正苦于以下问题:C++ Writer类的具体用法?C++ Writer怎么用?C++ Writer使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了Writer类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: SaveDocFile

void PropertyColorList::SaveDocFile (Base::Writer &writer) const
{
    Base::OutputStream str(writer.Stream());
    uint32_t uCt = (uint32_t)getSize();
    str << uCt;
    for (std::vector<App::Color>::const_iterator it = _lValueList.begin(); it != _lValueList.end(); ++it) {
        str << it->getPackedValue();
    }
}
开发者ID:Daedalus12,项目名称:FreeCAD_sf_master,代码行数:9,代码来源:PropertyStandard.cpp


示例2: Save

void PropertyStringList::Save (Base::Writer &writer) const
{
    writer.Stream() << writer.ind() << "<StringList count=\"" <<  getSize() <<"\">" << endl;
    writer.incInd();
    for(int i = 0;i<getSize(); i++) {
        std::string val = encodeAttribute(_lValueList[i]);
        writer.Stream() << writer.ind() << "<String value=\"" <<  val <<"\"/>" << endl;
    }
    writer.decInd();
    writer.Stream() << writer.ind() << "</StringList>" << endl ;
}
开发者ID:Daedalus12,项目名称:FreeCAD_sf_master,代码行数:11,代码来源:PropertyStandard.cpp


示例3: SaveDocFile

void PointKernel::SaveDocFile (Base::Writer &writer) const
{
    Base::OutputStream str(writer.Stream());
    uint32_t uCt = (uint32_t)size();
    str << uCt;
    // store the data without transforming it
    for (std::vector<value_type>::const_iterator it = _Points.begin(); it != _Points.end(); ++it) {
        str << it->x << it->y << it->z;
    }
}
开发者ID:pgilfernandez,项目名称:FreeCAD,代码行数:10,代码来源:Points.cpp


示例4: SaveDocFile

void PropertyVectorList::SaveDocFile (Base::Writer &writer) const
{
    Base::OutputStream str(writer.Stream());
    uint32_t uCt = (uint32_t)getSize();
    str << uCt;
    if (writer.getFileVersion() > 0) {
        for (std::vector<Base::Vector3d>::const_iterator it = _lValueList.begin(); it != _lValueList.end(); ++it) {
            str << it->x << it->y << it->z;
        }
    }
    else {
        for (std::vector<Base::Vector3d>::const_iterator it = _lValueList.begin(); it != _lValueList.end(); ++it) {
            float x = (float)it->x;
            float y = (float)it->y;
            float z = (float)it->z;
            str << x << y << z;
        }
    }
}
开发者ID:5263,项目名称:FreeCAD,代码行数:19,代码来源:PropertyGeo.cpp


示例5: saveObject

void PropertyPythonObject::saveObject(Base::Writer &writer) const
{
    Base::PyGILStateLocker lock;
    try {
        PropertyContainer* parent = this->getContainer();
        if (parent->isDerivedFrom(Base::Type::fromName("App::DocumentObject"))) {
            if (this->object.hasAttr("__object__")) {
                writer.Stream() << " object=\"yes\"";
            }
        }
        if (parent->isDerivedFrom(Base::Type::fromName("Gui::ViewProvider"))) {
            if (this->object.hasAttr("__vobject__")) {
                writer.Stream() << " vobject=\"yes\"";
            }
        }
    }
    catch (Py::Exception& e) {
        e.clear();
    }
}
开发者ID:AjinkyaDahale,项目名称:FreeCAD,代码行数:20,代码来源:PropertyPythonObject.cpp


示例6: SaveDocFile

void PropertyCurvatureList::SaveDocFile (Base::Writer &writer) const
{
    Base::OutputStream str(writer.Stream());
    uint32_t uCt = (uint32_t)getSize();
    str << uCt;
    for (std::vector<CurvatureInfo>::const_iterator it = _lValueList.begin(); it != _lValueList.end(); ++it) {
        str << it->fMaxCurvature << it->fMinCurvature;
        str << it->cMaxCurvDir.x << it->cMaxCurvDir.y << it->cMaxCurvDir.z;
        str << it->cMinCurvDir.x << it->cMinCurvDir.y << it->cMinCurvDir.z;
    }
}
开发者ID:3DPrinterGuy,项目名称:FreeCAD,代码行数:11,代码来源:MeshProperties.cpp


示例7: Save

void PropertyLinkSubList::Save (Base::Writer &writer) const
{
    writer.Stream() << writer.ind() << "<LinkSubList count=\"" <<  getSize() <<"\">" << endl;
    writer.incInd();
    for(int i = 0;i<getSize(); i++)
        writer.Stream() << writer.ind() <<
            "<Link " <<
            "obj=\"" <<  _lValueList[i]->getNameInDocument() << "\" " <<
            "sub=\"" <<  _lSubList[i] <<
        "\"/>" << endl; ;
    writer.decInd();
    writer.Stream() << writer.ind() << "</LinkSubList>" << endl ;
}
开发者ID:Barleyman,项目名称:FreeCAD_sf_master,代码行数:13,代码来源:PropertyLinks.cpp


示例8: Save

void PropertyColumnWidths::Save(Base::Writer &writer) const
{
        // Save column information
    writer.Stream() << writer.ind() << "<ColumnInfo Count=\"" << size() << "\">" << std::endl;
    writer.incInd(); // indention for 'ColumnInfo'
    std::map<int, int>::const_iterator coli = begin();
    while (coli != end()) {
        writer.Stream() << writer.ind() << "<Column name=\"" << columnName(coli->first) << "\" width=\"" << coli->second << "\" />" << std::endl;
        ++coli;
    }
    writer.decInd(); // indention for 'ColumnInfo'
    writer.Stream() << writer.ind() << "</ColumnInfo>" << std::endl;
}
开发者ID:abdullahtahiriyo,项目名称:FreeCAD_sf_master,代码行数:13,代码来源:PropertyColumnWidths.cpp


示例9: SaveDocFile

void PropertyPartShape::SaveDocFile (Base::Writer &writer) const
{
    // If the shape is empty we simply store nothing. The file size will be 0 which
    // can be checked when reading in the data.
    if (_Shape._Shape.IsNull())
        return;
    // NOTE: Cleaning the triangulation may cause problems on some algorithms like BOP
    // Before writing to the project we clean all triangulation data to save memory
    BRepBuilderAPI_Copy copy(_Shape._Shape);
    const TopoDS_Shape& myShape = copy.Shape();
    BRepTools::Clean(myShape); // remove triangulation

    // create a temporary file and copy the content to the zip stream
    // once the tmp. filename is known use always the same because otherwise
    // we may run into some problems on the Linux platform
    static Base::FileInfo fi(Base::FileInfo::getTempFileName());

    if (!BRepTools::Write(myShape,(const Standard_CString)fi.filePath().c_str())) {
        // Note: Do NOT throw an exception here because if the tmp. file could
        // not be created we should not abort.
        // We only print an error message but continue writing the next files to the
        // stream...
        App::PropertyContainer* father = this->getContainer();
        if (father && father->isDerivedFrom(App::DocumentObject::getClassTypeId())) {
            App::DocumentObject* obj = static_cast<App::DocumentObject*>(father);
            Base::Console().Error("Shape of '%s' cannot be written to BRep file '%s'\n", 
                obj->Label.getValue(),fi.filePath().c_str());
        }
        else {
            Base::Console().Error("Cannot save BRep file '%s'\n", fi.filePath().c_str());
        }
    }

    Base::ifstream file(fi, std::ios::in | std::ios::binary);
    if (file){
        unsigned long ulSize = 0; 
        std::streambuf* buf = file.rdbuf();
        if (buf) {
            unsigned long ulCurr;
            ulCurr = buf->pubseekoff(0, std::ios::cur, std::ios::in);
            ulSize = buf->pubseekoff(0, std::ios::end, std::ios::in);
            buf->pubseekoff(ulCurr, std::ios::beg, std::ios::in);
        }

        // read in the ASCII file and write back to the stream
        std::strstreambuf sbuf(ulSize);
        file >> &sbuf;
        writer.Stream() << &sbuf;
    }

    file.close();
    // remove temp file
    fi.deleteFile();
}
开发者ID:ADVALAIN596,项目名称:FreeCAD_sf_master,代码行数:54,代码来源:PropertyTopoShape.cpp


示例10: Save

void PropertyRowHeights::Save(Base::Writer &writer) const
{
    // Save row information
    writer.Stream() << writer.ind() << "<RowInfo Count=\"" << size() << "\">" << std::endl;
    writer.incInd(); // indention for 'RowInfo'

    std::map<int, int>::const_iterator ri = begin();
    while (ri != end()) {
        writer.Stream() << writer.ind() << "<Row name=\"" << rowName(ri->first) << "\"  height=\"" << ri->second << "\" />" << std::endl;
        ++ri;
    }
    writer.decInd(); // indention for 'RowInfo'
    writer.Stream() << writer.ind() << "</RowInfo>" << std::endl;
}
开发者ID:abdullahtahiriyo,项目名称:FreeCAD_sf_master,代码行数:14,代码来源:PropertyRowHeights.cpp


示例11: Save

void PropertyLinkSub::Save (Base::Writer &writer) const
{
    const char* internal_name = "";
    // it can happen that the object is still alive but is not part of the document anymore and thus
    // returns 0
    if (_pcLinkSub && _pcLinkSub->getNameInDocument())
        internal_name = _pcLinkSub->getNameInDocument();
    writer.Stream() << writer.ind() << "<LinkSub value=\"" <<  internal_name <<"\" count=\"" <<  _cSubList.size() <<"\">" << std::endl;
    writer.incInd();
    for(unsigned int i = 0;i<_cSubList.size(); i++)
        writer.Stream() << writer.ind() << "<Sub value=\"" <<  _cSubList[i]<<"\"/>" << endl;
    writer.decInd();
    writer.Stream() << writer.ind() << "</LinkSub>" << endl ;
}
开发者ID:ulrich1a,项目名称:FreeCAD_sf_master,代码行数:14,代码来源:PropertyLinks.cpp


示例12: Save

/** 
 * Adds a separate XML file to the projects file that contains information about the view providers.
 */
void Document::Save (Base::Writer &writer) const
{
    // It's only possible to add extra information if force of XML is disabled
    if (writer.isForceXML() == false) {
        writer.addFile("GuiDocument.xml", this);

        if (App::GetApplication().GetParameterGroupByPath
            ("User parameter:BaseApp/Preferences/Document")->GetBool("SaveThumbnail",false)) {
            std::list<MDIView*> mdi = getMDIViews();
            for (std::list<MDIView*>::iterator it = mdi.begin(); it != mdi.end(); ++it) {
                if ((*it)->getTypeId().isDerivedFrom(View3DInventor::getClassTypeId())) {
                    View3DInventorViewer* view = static_cast<View3DInventor*>(*it)->getViewer();
                    d->thumb.setFileName(d->_pcDocument->FileName.getValue());
                    d->thumb.setSize(128);
                    d->thumb.setViewer(view);
                    d->thumb.Save(writer);
                    break;
                }
            }
        }
    }
}
开发者ID:jaywarrick,项目名称:FreeCAD_sf_master,代码行数:25,代码来源:Document.cpp


示例13: SaveDocFile

void PropertyFileIncluded::SaveDocFile (Base::Writer &writer) const
{
    Base::ifstream from(Base::FileInfo(_cValue.c_str()));
    if (!from)
        throw Base::Exception("PropertyFileIncluded::SaveDocFile() "
        "File in document transient dir deleted");

    // copy plain data
    unsigned char c;
    std::ostream& to = writer.Stream();
    while (from.get((char&)c)) {
        to.put((const char)c);
    }
}
开发者ID:Daedalus12,项目名称:FreeCAD_sf_master,代码行数:14,代码来源:PropertyFile.cpp


示例14: Save

void PropertyPartShape::Save (Base::Writer &writer) const
{
    if(!writer.isForceXML()) {
        //See SaveDocFile(), RestoreDocFile()
        if (writer.getMode("BinaryBrep")) {
            writer.Stream() << writer.ind() << "<Part file=\"" 
                            << writer.addFile("PartShape.bin", this)
                            << "\"/>" << std::endl;
        }
        else {
            writer.Stream() << writer.ind() << "<Part file=\"" 
                            << writer.addFile("PartShape.brp", this)
                            << "\"/>" << std::endl;
        }
    }
}
开发者ID:DevJohan,项目名称:FreeCAD_sf_master,代码行数:16,代码来源:PropertyTopoShape.cpp


示例15: Save

void PropertyPythonObject::Save (Base::Writer &writer) const
{
    //if (writer.isForceXML()) {
        std::string repr = this->toString();
        repr = Base::base64_encode((const unsigned char*)repr.c_str(), repr.size());
        std::string val = /*encodeValue*/(repr);
        writer.Stream() << writer.ind() << "<Python value=\"" << val
                        << "\" encoded=\"yes\"";

        Base::PyGILStateLocker lock;
        try {
            if (this->object.hasAttr("__module__") && this->object.hasAttr("__class__")) {
                Py::String mod(this->object.getAttr("__module__"));
                Py::Object cls(this->object.getAttr("__class__"));
                if (cls.hasAttr("__name__")) {
                    Py::String name(cls.getAttr("__name__"));
                    writer.Stream() << " module=\"" << (std::string)mod << "\""
                                    << " class=\"" << (std::string)name << "\"";
                }
            }
            else {
                writer.Stream() << " json=\"yes\"";
            }
        }
        catch (Py::Exception&) {
            Base::PyException e; // extract the Python error text
            e.ReportException();
        }

        saveObject(writer);
        writer.Stream() << "/>" << std::endl;
    //}
    //else {
    //    writer.Stream() << writer.ind() << "<Python file=\"" << 
    //    writer.addFile("pickle", this) << "\"/>" << std::endl;
    //}
}
开发者ID:AjinkyaDahale,项目名称:FreeCAD,代码行数:37,代码来源:PropertyPythonObject.cpp


示例16: SaveDocFile

void PropertyFileIncluded::SaveDocFile (Base::Writer &writer) const
{
    Base::ifstream from(Base::FileInfo(_cValue.c_str()), std::ios::in | std::ios::binary);
    if (!from) {
        std::stringstream str;
        str << "PropertyFileIncluded::SaveDocFile(): "
            << "File '" << _cValue << "' in transient directory doesn't exist.";
        throw Base::FileSystemError(str.str());
    }

    // copy plain data
    unsigned char c;
    std::ostream& to = writer.Stream();
    while (from.get((char&)c)) {
        to.put((char)c);
    }
}
开发者ID:ickby,项目名称:FreeCAD_sf_master,代码行数:17,代码来源:PropertyFile.cpp


示例17: Save

void PropertyMeshKernel::Save (Base::Writer &writer) const
{
    if (writer.isForceXML()) {
        writer.Stream() << writer.ind() << "<Mesh>" << std::endl;
        MeshCore::MeshOutput saver(_meshObject->getKernel());
        saver.SaveXML(writer);
    }
    else {
        writer.Stream() << writer.ind() << "<Mesh file=\"" << 
        writer.addFile("MeshKernel.bms", this) << "\"/>" << std::endl;
    }
}
开发者ID:3DPrinterGuy,项目名称:FreeCAD,代码行数:12,代码来源:MeshProperties.cpp


示例18: SaveDocFile

void Thumbnail::SaveDocFile (Base::Writer &writer) const
{
    if (!this->viewer)
        return;
    QImage img;
    try {
        this->viewer->savePicture(this->size, this->size, View3DInventorViewer::Current, img);
        // Alternative way of off-screen rendering
#if 0
        QGLFramebufferObject fbo(this->size, this->size,QGLFramebufferObject::Depth);
        fbo.bind();
        glEnable(GL_DEPTH_TEST);
        glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
        glDepthRange(0.1,1.0);
        glEnable(GL_LINE_SMOOTH);
        SoGLRenderAction gl(SbViewportRegion(this->size,this->size));
        gl.apply(this->viewer->getSceneManager()->getSceneGraph());
        fbo.release();
        img = fbo.toImage();
#endif
    }
    catch (...) {
        return; // offscreen rendering failed
    }

    QPixmap px = Gui::BitmapFactory().pixmap(App::Application::Config()["AppIcon"].c_str());
    px = BitmapFactory().merge(QPixmap::fromImage(img),px,BitmapFactoryInst::BottomRight);

    // according to specification add some meta-information to the image
    uint mt = QDateTime::currentDateTime().toTime_t();
    QString mtime = QString::fromAscii("%1").arg(mt);
    img.setText(QLatin1String("Software"), qApp->applicationName());
    img.setText(QLatin1String("Thumb::Mimetype"), QLatin1String("application/x-extension-fcstd"));
    img.setText(QLatin1String("Thumb::MTime"), mtime);
    img.setText(QLatin1String("Thumb::URI"), this->uri.toString());

    QByteArray ba;
    QBuffer buffer(&ba);
    buffer.open(QIODevice::WriteOnly);
    px.save(&buffer, "PNG");
    writer.Stream().write(ba.constData(), ba.length());
}
开发者ID:Didier94,项目名称:FreeCAD_sf_master,代码行数:42,代码来源:Thumbnail.cpp


示例19: SaveDocFile

void Thumbnail::SaveDocFile (Base::Writer &writer) const
{
    if (!this->viewer)
        return;
    QImage img;
    bool pbuffer = QGLPixelBuffer::hasOpenGLPbuffers();
    if (App::GetApplication().GetParameterGroupByPath
        ("User parameter:BaseApp/Preferences/Document")->GetBool("DisablePBuffers",!pbuffer)) {
        this->createThumbnailFromFramebuffer(img);
    }
    else {
        try {
            this->viewer->savePicture(this->size, this->size, QColor(), img);
        }
        catch (...) {
            this->createThumbnailFromFramebuffer(img);
        }
    }

    QPixmap px = Gui::BitmapFactory().pixmap(App::Application::Config()["AppIcon"].c_str());
    if (!img.isNull())
        px = BitmapFactory().merge(QPixmap::fromImage(img),px,BitmapFactoryInst::BottomRight);

    if (!px.isNull()) {
        // according to specification add some meta-information to the image
        uint mt = QDateTime::currentDateTime().toTime_t();
        QString mtime = QString::fromLatin1("%1").arg(mt);
        img.setText(QLatin1String("Software"), qApp->applicationName());
        img.setText(QLatin1String("Thumb::Mimetype"), QLatin1String("application/x-extension-fcstd"));
        img.setText(QLatin1String("Thumb::MTime"), mtime);
        img.setText(QLatin1String("Thumb::URI"), this->uri.toString());

        QByteArray ba;
        QBuffer buffer(&ba);
        buffer.open(QIODevice::WriteOnly);
        px.save(&buffer, "PNG");
        writer.Stream().write(ba.constData(), ba.length());
    }
}
开发者ID:abdullahtahiriyo,项目名称:FreeCAD_sf_master,代码行数:39,代码来源:Thumbnail.cpp


示例20: SaveDocFile

void PropertyPythonObject::SaveDocFile (Base::Writer &writer) const
{
    std::string buffer = this->toString();
    for (std::string::iterator it = buffer.begin(); it != buffer.end(); ++it)
        writer.Stream().put(*it);
}
开发者ID:AjinkyaDahale,项目名称:FreeCAD,代码行数:6,代码来源:PropertyPythonObject.cpp



注:本文中的base::Writer类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ base::XMLReader类代码示例发布时间:2022-05-31
下一篇:
C++ base::VectorPy类代码示例发布时间:2022-05-31
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap