本文整理汇总了C++中ABTS_INT_EQUAL函数的典型用法代码示例。如果您正苦于以下问题：C++ ABTS_INT_EQUAL函数的具体用法？C++ ABTS_INT_EQUAL怎么用？C++ ABTS_INT_EQUAL使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ABTS_INT_EQUAL函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: test_mkdir
static void test_mkdir(abts_case *tc, void *data)
{
apr_status_t rv;
apr_finfo_t finfo;
rv = apr_dir_make("data/testdir", APR_UREAD | APR_UWRITE | APR_UEXECUTE, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_stat(&finfo, "data/testdir", APR_FINFO_TYPE, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_INT_EQUAL(tc, APR_DIR, finfo.filetype);
}
开发者ID:Alivx，项目名称:apache2nginx，代码行数:12，代码来源:testdir.c
示例2: recv0_pollset
static void recv0_pollset(abts_case *tc, void *data)
{
apr_status_t rv;
int lrv;
const apr_pollfd_t *descs = NULL;
recv_msg(s, 0, p, tc);
rv = apr_pollset_poll(pollset, 0, &lrv, &descs);
ABTS_INT_EQUAL(tc, 1, APR_STATUS_IS_TIMEUP(rv));
ABTS_INT_EQUAL(tc, 0, lrv);
ABTS_PTR_EQUAL(tc, NULL, descs);
}
开发者ID:KunZheng，项目名称:mosbench，代码行数:12，代码来源:testpoll.c
示例3: test_file_remove
static void test_file_remove(abts_case *tc, void *data)
{
apr_status_t rv;
apr_file_t *filetest = NULL;
rv = apr_file_remove(FILENAME, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_file_open(&filetest, FILENAME, APR_FOPEN_READ,
APR_FPROT_UREAD | APR_FPROT_UWRITE | APR_FPROT_GREAD, p);
ABTS_INT_EQUAL(tc, 1, APR_STATUS_IS_ENOENT(rv));
}
开发者ID:cmjonze，项目名称:apr，代码行数:12，代码来源:testfile.c
示例4: test_xthread
static void test_xthread(abts_case *tc, void *data)
{
apr_file_t *f;
const char *fname = "data/testxthread.dat";
apr_status_t rv;
apr_int32_t flags = APR_FOPEN_CREATE|APR_FOPEN_READ|APR_FOPEN_WRITE|APR_FOPEN_APPEND|APR_FOPEN_XTHREAD;
char buf[128] = { 0 };
/* Test for bug 38438, opening file with append + xthread and seeking to
the end of the file resulted in writes going to the beginning not the
end. */
apr_file_remove(fname, p);
APR_ASSERT_SUCCESS(tc, "open test file",
apr_file_open(&f, fname, flags,
APR_UREAD|APR_UWRITE, p));
APR_ASSERT_SUCCESS(tc, "write should succeed",
apr_file_puts("hello", f));
apr_file_close(f);
APR_ASSERT_SUCCESS(tc, "open test file",
apr_file_open(&f, fname, flags,
APR_UREAD|APR_UWRITE, p));
/* Seek to the end. */
{
apr_off_t offset = 0;
rv = apr_file_seek(f, APR_END, &offset);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
}
APR_ASSERT_SUCCESS(tc, "more writes should succeed",
apr_file_puts("world", f));
/* Back to the beginning. */
{
apr_off_t offset = 0;
rv = apr_file_seek(f, APR_SET, &offset);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
}
apr_file_read_full(f, buf, sizeof(buf), NULL);
ABTS_STR_EQUAL(tc, "helloworld", buf);
apr_file_close(f);
}
开发者ID:XianliangJ，项目名称:mtcp，代码行数:52，代码来源:testfile.c
示例5: close_pipe
static void close_pipe(abts_case *tc, void *data)
{
apr_status_t rv;
apr_size_t nbytes = 256;
char buf[256];
rv = apr_file_close(readp);
rv = apr_file_close(writep);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_file_read(readp, buf, &nbytes);
ABTS_INT_EQUAL(tc, 1, APR_STATUS_IS_EBADF(rv));
}
开发者ID:AbrahamJewowich，项目名称:FreeSWITCH，代码行数:13，代码来源:testpipe.c
示例6: test_removeall
static void test_removeall(abts_case *tc, void *data)
{
apr_status_t rv;
rv = apr_dir_remove("data/one/two/three", p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_dir_remove("data/one/two", p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_dir_remove("data/one", p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
}
开发者ID:321543223，项目名称:kbengine，代码行数:13，代码来源:testdir.c
示例7: test_mkdir_twice
static void test_mkdir_twice(abts_case *tc, void *data)
{
apr_status_t rv;
rv = apr_dir_make("data/testdir", APR_UREAD | APR_UWRITE | APR_UEXECUTE, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_dir_make("data/testdir", APR_UREAD | APR_UWRITE | APR_UEXECUTE, p);
ABTS_INT_EQUAL(tc, 1, APR_STATUS_IS_EEXIST(rv));
rv = apr_dir_remove("data/testdir", p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
}
开发者ID:321543223，项目名称:kbengine，代码行数:13，代码来源:testdir.c
示例8: test_seek
static void test_seek(abts_case *tc, void *data)
{
apr_status_t rv;
apr_off_t offset = 5;
apr_size_t nbytes = 256;
char *str = apr_pcalloc(p, nbytes + 1);
apr_file_t *filetest = NULL;
rv = apr_file_open(&filetest, FILENAME,
APR_FOPEN_READ,
APR_UREAD | APR_UWRITE | APR_GREAD, p);
APR_ASSERT_SUCCESS(tc, "Open test file " FILENAME, rv);
rv = apr_file_read(filetest, str, &nbytes);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_SIZE_EQUAL(tc, strlen(TESTSTR), nbytes);
ABTS_STR_EQUAL(tc, TESTSTR, str);
memset(str, 0, nbytes + 1);
rv = apr_file_seek(filetest, SEEK_SET, &offset);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_file_read(filetest, str, &nbytes);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_SIZE_EQUAL(tc, strlen(TESTSTR) - 5, nbytes);
ABTS_STR_EQUAL(tc, TESTSTR + 5, str);
apr_file_close(filetest);
/* Test for regression of sign error bug with SEEK_END and
buffered files. */
rv = apr_file_open(&filetest, FILENAME,
APR_FOPEN_READ | APR_FOPEN_BUFFERED,
APR_UREAD | APR_UWRITE | APR_GREAD, p);
APR_ASSERT_SUCCESS(tc, "Open test file " FILENAME, rv);
offset = -5;
rv = apr_file_seek(filetest, SEEK_END, &offset);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_SIZE_EQUAL(tc, strlen(TESTSTR) - 5, nbytes);
memset(str, 0, nbytes + 1);
nbytes = 256;
rv = apr_file_read(filetest, str, &nbytes);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_SIZE_EQUAL(tc, 5, nbytes);
ABTS_STR_EQUAL(tc, TESTSTR + strlen(TESTSTR) - 5, str);
apr_file_close(filetest);
}
开发者ID:XianliangJ，项目名称:mtcp，代码行数:51，代码来源:testfile.c
示例9: make_socket
static void make_socket(apr_socket_t **sock, apr_sockaddr_t **sa,
apr_port_t port, apr_pool_t *p, abts_case *tc)
{
apr_status_t rv;
rv = apr_sockaddr_info_get(sa, "127.0.0.1", APR_UNSPEC, port, 0, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_socket_create(sock, (*sa)->family, SOCK_DGRAM, 0, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_socket_bind((*sock), (*sa));
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
}
开发者ID:Ga-vin，项目名称:apache，代码行数:14，代码来源:testpoll.c
示例10: timeout_pollcb
static void timeout_pollcb(abts_case *tc, void *data)
{
apr_status_t rv;
pollcb_baton_t pcb;
POLLCB_PREREQ;
pcb.count = 0;
pcb.tc = tc;
rv = apr_pollcb_poll(pollcb, 1, trigger_pollcb_cb, &pcb);
ABTS_INT_EQUAL(tc, 1, APR_STATUS_IS_TIMEUP(rv));
ABTS_INT_EQUAL(tc, 0, pcb.count);
}
开发者ID:Ga-vin，项目名称:apache，代码行数:14，代码来源:testpoll.c
示例11: test_getc
static void test_getc(abts_case *tc, void *data)
{
apr_file_t *f = NULL;
apr_status_t rv;
char ch;
rv = apr_file_open(&f, FILENAME, APR_READ, 0, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
apr_file_getc(&ch, f);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_INT_EQUAL(tc, (int)TESTSTR[0], (int)ch);
apr_file_close(f);
}
开发者ID:aptana，项目名称:Jaxer，代码行数:14，代码来源:testfile.c
示例12: list_split_multi
static void list_split_multi(abts_case *tc, void *data)
{
int i;
apr_status_t rv;
apr_array_header_t *pathelts;
pathelts = NULL;
rv = apr_filepath_list_split(&pathelts, path_in, p);
ABTS_PTR_NOTNULL(tc, pathelts);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_INT_EQUAL(tc, parts_out_count, pathelts->nelts);
for (i = 0; i < pathelts->nelts; ++i)
ABTS_STR_EQUAL(tc, parts_out[i], ((char**)pathelts->elts)[i]);
}
开发者ID:0jpq0，项目名称:kbengine，代码行数:14，代码来源:testpath.c
示例13: test_dec32
static void test_dec32(abts_case *tc, void *data)
{
apr_uint32_t y32;
int rv;
apr_atomic_set32(&y32, 2);
rv = apr_atomic_dec32(&y32);
ABTS_INT_EQUAL(tc, 1, y32);
ABTS_ASSERT(tc, "atomic_dec returned zero when it shouldn't", rv != 0);
rv = apr_atomic_dec32(&y32);
ABTS_INT_EQUAL(tc, 0, y32);
ABTS_ASSERT(tc, "atomic_dec didn't returned zero when it should", rv == 0);
}
开发者ID:AAthresh，项目名称:quantlib，代码行数:15，代码来源:testatomic.c
示例14: test_userdata_set
static void test_userdata_set(abts_case *tc, void *data)
{
apr_status_t rv;
apr_file_t *filetest = NULL;
rv = apr_file_open(&filetest, FILENAME,
APR_WRITE,
APR_UREAD | APR_UWRITE | APR_GREAD, p);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
rv = apr_file_data_set(filetest, "This is a test",
"test", apr_pool_cleanup_null);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
apr_file_close(filetest);
}
开发者ID:aptana，项目名称:Jaxer，代码行数:15，代码来源:testfile.c
示例15: send_last_pollset
static void send_last_pollset(abts_case *tc, void *data)
{
apr_status_t rv;
const apr_pollfd_t *descs = NULL;
int num;
send_msg(s, sa, LARGE_NUM_SOCKETS - 1, tc);
rv = apr_pollset_poll(pollset, -1, &num, &descs);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
ABTS_INT_EQUAL(tc, 1, num);
ABTS_PTR_NOTNULL(tc, descs);
ABTS_PTR_EQUAL(tc, s[LARGE_NUM_SOCKETS - 1], descs[0].desc.s);
ABTS_PTR_EQUAL(tc, s[LARGE_NUM_SOCKETS - 1], descs[0].client_data);
}
开发者ID:Ga-vin，项目名称:apache，代码行数:15，代码来源:testpoll.c
示例16: test_anon
static void test_anon(abts_case *tc, void *data)
{
apr_proc_t proc;
apr_status_t rv;
apr_shm_t *shm;
apr_size_t retsize;
int cnt, i;
int recvd;
rv = apr_shm_create(&shm, SHARED_SIZE, NULL, p);
APR_ASSERT_SUCCESS(tc, "Error allocating shared memory block", rv);
ABTS_PTR_NOTNULL(tc, shm);
retsize = apr_shm_size_get(shm);
ABTS_INT_EQUAL(tc, SHARED_SIZE, retsize);
boxes = apr_shm_baseaddr_get(shm);
ABTS_PTR_NOTNULL(tc, boxes);
rv = apr_proc_fork(&proc, p);
if (rv == APR_INCHILD) { /* child */
int num = msgwait(5, 0, N_BOXES);
/* exit with the number of messages received so that the parent
* can check that all messages were received.
*/
exit(num);
}
else if (rv == APR_INPARENT) { /* parent */
i = N_BOXES;
cnt = 0;
while (cnt++ < N_MESSAGES) {
if ((i-=3) < 0) {
i += N_BOXES; /* start over at the top */
}
msgput(i, MSG);
apr_sleep(apr_time_make(0, 10000));
}
}
else {
ABTS_FAIL(tc, "apr_proc_fork failed");
}
/* wait for the child */
rv = apr_proc_wait(&proc, &recvd, NULL, APR_WAIT);
ABTS_INT_EQUAL(tc, N_MESSAGES, recvd);
rv = apr_shm_destroy(shm);
APR_ASSERT_SUCCESS(tc, "Error destroying shared memory block", rv);
}
开发者ID:0jpq0，项目名称:kbengine，代码行数:48，代码来源:testshm.c
示例17: test_atomics_threaded
static void test_atomics_threaded(abts_case *tc, void *data)
{
apr_thread_t *t1[NUM_THREADS];
apr_thread_t *t2[NUM_THREADS];
apr_thread_t *t3[NUM_THREADS];
apr_status_t s1[NUM_THREADS];
apr_status_t s2[NUM_THREADS];
apr_status_t s3[NUM_THREADS];
apr_status_t rv;
int i;
#ifdef HAVE_PTHREAD_SETCONCURRENCY
pthread_setconcurrency(8);
#endif
rv = apr_thread_mutex_create(&thread_lock, APR_THREAD_MUTEX_DEFAULT, p);
APR_ASSERT_SUCCESS(tc, "Could not create lock", rv);
for (i = 0; i < NUM_THREADS; i++) {
apr_status_t r1, r2, r3;
r1 = apr_thread_create(&t1[i], NULL, thread_func_mutex, NULL, p);
r2 = apr_thread_create(&t2[i], NULL, thread_func_atomic, NULL, p);
r3 = apr_thread_create(&t3[i], NULL, thread_func_none, NULL, p);
ABTS_ASSERT(tc, "Failed creating threads",
r1 == APR_SUCCESS && r2 == APR_SUCCESS &&
r3 == APR_SUCCESS);
}
for (i = 0; i < NUM_THREADS; i++) {
apr_thread_join(&s1[i], t1[i]);
apr_thread_join(&s2[i], t2[i]);
apr_thread_join(&s3[i], t3[i]);
ABTS_ASSERT(tc, "Invalid return value from thread_join",
s1[i] == exit_ret_val && s2[i] == exit_ret_val &&
s3[i] == exit_ret_val);
}
ABTS_INT_EQUAL(tc, x, NUM_THREADS * NUM_ITERATIONS);
ABTS_INT_EQUAL(tc, apr_atomic_read32(&y), NUM_THREADS * NUM_ITERATIONS);
/* Comment out this test, because I have no clue what this test is
* actually telling us. We are checking something that may or may not
* be true, and it isn't really testing APR at all.
ABTS_ASSERT(tc, "We expect this to fail, because we tried to update "
"an integer in a non-thread-safe manner.",
z != NUM_THREADS * NUM_ITERATIONS);
*/
}
开发者ID:AAthresh，项目名称:quantlib，代码行数:48，代码来源:testatomic.c
示例18: test_thread_rwlock
static void test_thread_rwlock(abts_case *tc, void *data)
{
apr_thread_t *t1, *t2, *t3, *t4;
apr_status_t s1, s2, s3, s4;
s1 = apr_thread_rwlock_create(&rwlock, p);
if (s1 == APR_ENOTIMPL) {
ABTS_NOT_IMPL(tc, "rwlocks not implemented");
return;
}
APR_ASSERT_SUCCESS(tc, "rwlock_create", s1);
ABTS_PTR_NOTNULL(tc, rwlock);
i = 0;
x = 0;
s1 = apr_thread_create(&t1, NULL, thread_rwlock_func, NULL, p);
APR_ASSERT_SUCCESS(tc, "create thread 1", s1);
s2 = apr_thread_create(&t2, NULL, thread_rwlock_func, NULL, p);
APR_ASSERT_SUCCESS(tc, "create thread 2", s2);
s3 = apr_thread_create(&t3, NULL, thread_rwlock_func, NULL, p);
APR_ASSERT_SUCCESS(tc, "create thread 3", s3);
s4 = apr_thread_create(&t4, NULL, thread_rwlock_func, NULL, p);
APR_ASSERT_SUCCESS(tc, "create thread 4", s4);
apr_thread_join(&s1, t1);
apr_thread_join(&s2, t2);
apr_thread_join(&s3, t3);
apr_thread_join(&s4, t4);
ABTS_INT_EQUAL(tc, MAX_ITER, x);
apr_thread_rwlock_destroy(rwlock);
}
开发者ID:skizhak，项目名称:open-media-flow-controller，代码行数:34，代码来源:testlock.c
示例19: test_file_close
static void test_file_close(abts_case *tc, void *data)
{
apr_status_t rv;
rv = apr_file_close(thefile);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
}
开发者ID:Arcterus，项目名称:MoarVM，代码行数:7，代码来源:testmmap.c
示例20: no_options
static void no_options(abts_case *tc, void *data)
{
int largc = 5;
const char * const largv[] = {"testprog", "-a", "-b", "-c", "-d"};
apr_getopt_t *opt;
apr_status_t rv;
char ch;
const char *optarg;
char str[8196];
str[0] = '\0';
rv = apr_getopt_init(&opt, p, largc, largv);
ABTS_INT_EQUAL(tc, APR_SUCCESS, rv);
opt->errfn = unknown_arg;
opt->errarg = str;
while (apr_getopt(opt, "efgh", &ch, &optarg) == APR_SUCCESS) {
switch (ch) {
case 'a':
case 'b':
case 'c':
case 'd':
format_arg(str, ch, optarg);
break;
default:
break;
}
}
ABTS_STR_EQUAL(tc, "testprog: illegal option -- a\n", str);
}
开发者ID:ohmann，项目名称:checkapi，代码行数:31，代码来源:testargs.c
注：本文中的ABTS_INT_EQUAL函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论