C++ ACRX_T函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ACRX_T函数的典型用法代码示例。如果您正苦于以下问题：C++ ACRX_T函数的具体用法？C++ ACRX_T怎么用？C++ ACRX_T使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ACRX_T函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: getNativeCurve

// Utility function to extract a useful, bounded curve with native
// curve definition data, from the external (bounded) curve
AcBr::ErrorStatus
getNativeCurve(const AcBrEdge& edgeEntity,
               AcGeCurve3d*&   curveGeometry,
               AcGeCurve3d*&   nativeGeometry)
{
    AcBr::ErrorStatus returnValue = edgeEntity.getCurve(curveGeometry);  
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrEdge::getCurve:"));
        errorReport(returnValue);
        return returnValue;
	}
	if (curveGeometry == NULL) {
		acutPrintf(ACRX_T("\n getNativeCurve: external 3d curve is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (curveGeometry->type() != kExternalCurve3d) {
		acutPrintf(ACRX_T("\n getNativeCurve: curve is not an external 3d curve\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (!((AcGeExternalCurve3d*)curveGeometry)->isDefined()) {
		acutPrintf(ACRX_T("\n getNativeCurve: external 3d curve is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (!((AcGeExternalCurve3d*)curveGeometry)->isNativeCurve(nativeGeometry)
	    || (nativeGeometry == NULL)) {
		acutPrintf(ACRX_T("\n getNativeCurve: native 3d curve is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
    return returnValue;
}

开发者ID:Bohr27，项目名称:ObjectARXCore，代码行数:36，代码来源:brgeutl.cpp

示例2: getNativeParamCurve

// Utility function to extract a useful 2d nurb curve with native
// definition data, from the external paramcurve
AcBr::ErrorStatus
getNativeParamCurve(const AcBrLoopEdgeTraverser& loopEdge,
                    AcGeCurve2d*&                pcurveGeometry,
                    AcGeNurbCurve2d&             nurbGeometry)
{
    AcBr::ErrorStatus returnValue = loopEdge.getParamCurve(pcurveGeometry);  
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrLoopEdgeTraverser::getParamCurve:"));
        errorReport(returnValue);
        return returnValue;
	}
	if (pcurveGeometry == NULL) {
		acutPrintf(ACRX_T("\n getNativeParamCurve: external param curve is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (pcurveGeometry->type() != kExternalCurve2d) {
		acutPrintf(ACRX_T("\n getNativeParamCurve: parameter curve is not an external 2d curve\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (!((AcGeExternalCurve2d*)pcurveGeometry)->isDefined()) {
		acutPrintf(ACRX_T("\n getNativeParamCurve: external param curve is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (!((AcGeExternalCurve2d*)pcurveGeometry)->isNurbCurve(nurbGeometry)) {
		acutPrintf(ACRX_T("\n getNativeParamCurve: native 2d nurb curve is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
    return returnValue;
}

开发者ID:Bohr27，项目名称:ObjectARXCore，代码行数:35，代码来源:brgeutl.cpp

示例3: countShells

static AcBr::ErrorStatus 
countShells(const AcBrBrep& brepEntity)
{
	AcBr::ErrorStatus returnValue = AcBr::eOk;

	// make a global shell traverser
	AcBrBrepShellTraverser brepShellTrav;
	returnValue = brepShellTrav.setBrep(brepEntity);
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrBrepShellTraverser::setBrep:"));
		errorReport(returnValue);
		return returnValue;
	}

	// count the shells
	int shellCount = 0;
	while (!brepShellTrav.done() && (returnValue == AcBr::eOk)) {
	    shellCount++;
		returnValue = brepShellTrav.next();
		if (returnValue != AcBr::eOk) {
			acutPrintf(ACRX_T("\n Error in AcBrBrepShellTraverser::next:"));  
			errorReport(returnValue);
			return returnValue;
		}
	}
	acutPrintf(ACRX_T("\n ***Brep has %d shells\n"), shellCount);	  

	return returnValue;
}

开发者ID:Bohr27，项目名称:ObjectARXCore，代码行数:29，代码来源:brcount.cpp

示例4: countComplexes

static AcBr::ErrorStatus 
countComplexes(const AcBrBrep& brepEntity)
{
	AcBr::ErrorStatus returnValue = AcBr::eOk;

	// make a global complex traverser
	AcBrBrepComplexTraverser brepComplexTrav;
	returnValue = brepComplexTrav.setBrep(brepEntity);
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrBrepComplexTraverser::setBrep:"));
		errorReport(returnValue);
		return returnValue;
	}

	// count the faces
	int complexCount = 0;
	while (!brepComplexTrav.done() && (returnValue == AcBr::eOk)) {
	    complexCount++;
		returnValue = brepComplexTrav.next();
		if (returnValue != AcBr::eOk) {
			acutPrintf(ACRX_T("\n Error in AcBrBrepComplexTraverser::next:"));  
			errorReport(returnValue);
			return returnValue;
		}
	}
	acutPrintf(ACRX_T("\n ***Brep has %d complexes\n"), complexCount);	  

	return returnValue;
}

开发者ID:Bohr27，项目名称:ObjectARXCore，代码行数:29，代码来源:brcount.cpp

示例5: asdktest3

void asdktest3 () {
    //----- Create a line and a circle (memory only)
    AcDbLine *pLine =new AcDbLine (AcGePoint3d (), AcGePoint3d (100, 100, -100)) ;
    AcDbCircle *pCircle =new AcDbCircle (AcGePoint3d (50, 50, 0), AcGeVector3d (0, 0, 1) , 25.0) ;

    //----- Create a region from the circle
    AcDbVoidPtrArray arr1, arr2 ;
    arr1.append (pCircle) ;
    AcDbRegion::createFromCurves (arr1, arr2) ;
    AcDbRegion *pRegion =(AcDbRegion *)arr2.at (0) ;
    delete pCircle ;

    //----- Add the line and the region objects to the collector
    //----- NB: Remember those object are memory objects only
    AsdkHlrCollector collector ;
    collector.setDeleteState (true) ;
    collector.addEntity (pLine) ;
    collector.addEntity (pRegion) ;

    //----- Process hidden line removal
    AsdkHlrEngine hlr (AcGePoint3d (50, 50,0), AcGeVector3d (0, 0, 1), kEntity | kBlock | kShowAll | kProject | kHonorInternals) ;
    hlr.run (collector) ;

    //----- To easily see the result, we do append resulting entities to the current database
    //----- and use the color convention used in command 'TEST1'
    int n =collector.mOutputData.logicalLength () ;
    for ( int i =0 ; i < n ; i++ ) {
        AsdkHlrData *p =collector.mOutputData [i] ;

        AcDbEntity *pEnt =p->getResultEntity () ;
        AsdkHlrData::Visibility vis =p->getVisibility () ;
        if ( vis == AsdkHlrData::kVisible )
            pEnt->setColorIndex (1) ;
        else
            pEnt->setColorIndex (5) ;
        AcDbObjectId id ;
        if ( postToDatabase (NULL, pEnt, id) != Acad::eOk ) {
            acutPrintf (_T("Failed to add entity to current space.\n")) ;
            break ;
        }

        //----- Entity originator path
        AcDbObjectIdArray ids =p->getObjectIds () ;
        if ( ids.logicalLength () > 0 ) {
            acutPrintf (ACRX_T("\n%ld, "), pEnt->objectId ().asOldId ()) ;
            for ( int j =0 ; j < ids.logicalLength () ; j++ ) {
                acutPrintf (ACRX_T("%ld, "), ids.at (j).asOldId ()) ;
            }
        }

        pEnt->close () ;
    }
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:53，代码来源:HlrArxSampleCommands.cpp

示例6: dumpModel

void
dumpModel()
{
    AcBr::ErrorStatus returnValue = AcBr::eOk;

	// Select the entity by type
	AcBrEntity* pEnt = NULL;
	AcDb::SubentType subType = AcDb::kNullSubentType;
	returnValue = selectEntityByType(pEnt, subType);
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in selectEntityByType:"));
		errorReport(returnValue);
		delete pEnt;
    	return;
    }

	switch (subType) {
	case AcDb::kNullSubentType:
		// brep
		returnValue	= brepDump((const AcBrBrep&)(*pEnt));
		if (returnValue != AcBr::eOk) {
			acutPrintf(ACRX_T("\n Error in brepDump:")); 
			errorReport(returnValue);
			return;
		}
		break;
    case AcDb::kFaceSubentType:
		// face
		returnValue = faceDump((const AcBrFace&)(*pEnt));
		if (returnValue != AcBr::eOk) {
			acutPrintf(ACRX_T("\n Error in faceDump:"));
			errorReport(returnValue);
			return;
		}
        break;
    case AcDb::kEdgeSubentType:
	    // edge
		returnValue = edgeDump((const AcBrEdge&)(*pEnt));
		if (returnValue != AcBr::eOk) {
			acutPrintf(ACRX_T("\n Error in edgeDump:"));
			errorReport(returnValue);
			return;
		}
		break;  
    default:
        acutPrintf(ACRX_T("\n dumpModel: unsupported subentity type: %d\n"), subType);
        return;
	}
	delete pEnt;

	return;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:52，代码来源:brdump.cpp

示例7: pickViewport

Adesk::Boolean pickViewport (AcDbViewport *&pVp) {
    ads_point p1, p2 ;
    
    if ( acedGetPoint (NULL, ACRX_T("\nPlease enter point 1: "), p1) != RTNORM )
        return (Adesk::kFalse) ;
    if ( acedGetPoint (p1, ACRX_T("\nPlease enter point 2: "), p2) != RTNORM )
        return (Adesk::kFalse) ;
    acdbUcs2Wcs (p1, p1, Adesk::kFalse ) ;
    acdbUcs2Wcs (p2, p2, Adesk::kFalse ) ;

    int frontClip =AfxMessageBox (ACRX_T("Would you like to clip at the front?"), MB_YESNO) ;
    int backClip =AfxMessageBox (ACRX_T("Would you like to clip at the back?"), MB_YESNO) ;
    
    pVp =new AcDbViewport ;
    pVp->setViewTarget (asPnt3d (p2)) ;
    pVp->setViewDirection (asPnt3d (p1) - asPnt3d (p2)) ;

    pVp->setFrontClipDistance (asPnt3d (p1).distanceTo (asPnt3d (p2))) ;
    pVp->setBackClipDistance (0) ;
    
    acutPrintf (ACRX_T("\nFront Clipping is %d"), pVp->isFrontClipOn ()) ;
    if ( frontClip == IDYES )
        pVp->setFrontClipOn () ;
    acutPrintf (ACRX_T("\nFront Clipping is %d"), pVp->isFrontClipOn ()) ;
    
    acutPrintf (ACRX_T("\nBack Clipping is %d"), pVp->isBackClipOn ()) ;
    if ( backClip == IDYES )
        pVp->setBackClipOn () ;
    acutPrintf(ACRX_T("\nBack Clipping is %d"), pVp->isBackClipOn ()) ;
    
    return (Adesk::kTrue) ;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:32，代码来源:HlrArxSampleCommands.cpp

示例8: entityAssociatedReport

void
entityAssociatedReport(AcBrEntity* entityAssociated)
{
	if (entityAssociated != NULL) {
		if (entityAssociated->isKindOf(AcBrBrep::desc())) {
		    acutPrintf(ACRX_T("\n Mesh subobject is inside the brep\n"));
		} else if (entityAssociated->isKindOf(AcBrFace::desc())) {
			acutPrintf(ACRX_T("\n Mesh subobject is on a face\n"));
		} else if (entityAssociated->isKindOf(AcBrEdge::desc())) {
			acutPrintf(ACRX_T("\n Mesh subobject is on an edge\n"));
		} else if (entityAssociated->isKindOf(AcBrVertex::desc())) {
			acutPrintf(ACRX_T("\n Mesh subobject is on a vertex\n"));
        } else acutPrintf(ACRX_T("\n Unsupported entity type encountered\n"));
	}
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:15，代码来源:brreport.cpp

示例9: bblockReport

void
bblockReport(AcGePoint3d& min, AcGePoint3d& max)
{
    acutPrintf(ACRX_T("\n Bounding Block lower corner is ("));
	acutPrintf (ACRX_T("%lf, "), min.x);	
	acutPrintf (ACRX_T("%lf, "), min.y);
	acutPrintf (ACRX_T("%lf"), min.z);
	acutPrintf(ACRX_T(")\n"));	
    acutPrintf(ACRX_T("\n Bounding Block upper corner is ("));
	acutPrintf (ACRX_T("%lf, "), max.x);	
	acutPrintf (ACRX_T("%lf, "), max.y);
	acutPrintf (ACRX_T("%lf"), max.z);
	acutPrintf(ACRX_T(")\n"));	

	return;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:16，代码来源:brreport.cpp

示例10: listFiles

//------------
// Get project's files names by using mask option.
bool listFiles()
{
    CLogger::Print(_T("*Call: listFiles()"));

    // Check whether or not a DENKI project is opening?
    if (!DenkiIsOpenProject()) {
        CLogger::Print(_T("*Exit: listFiles() - Denki project is not being opened!"));
        return false;
    }

    DenkiDwgProject* pProject = DenkiDwgProject::getCurrent();

    // Create a DenkiGetProjectFileMask object (mask option).
    DenkiGetProjectFileMask mask = (DenkiGetProjectFileMask)(MASK_DENKIZUMEN | MASK_SONOTAZUMEN);
    int nCount = 0;

    // Get project's files into an array.
    const LPCTSTR* pAryDwg = DenkiGetProjectFiles(mask, &nCount);
    if (!pAryDwg) {
        CLogger::Print(_T("*Exit: listFiles() - Fail to get the project's files names!"));
        return false;
    }

    // Steps through the array's items to print out its value.
    for (int nIdx=0; nIdx<nCount; nIdx++) {
        acutPrintf(ACRX_T("\n%02d:%s"), nIdx, pAryDwg[nIdx]);
        CLogger::Print(_T("Inform: %02d : %s"), nIdx, pAryDwg[nIdx]);
    }

    DenkiFreeCharPtrArray(pAryDwg); // Remember to free returned memory after using DenkiGetProjectFiles function
    CLogger::Print(_T("*Exit: listFiles()"));
    return true;
}

开发者ID:vuonganh1993，项目名称:arxlss，代码行数:35，代码来源:LSS03.cpp

示例11: subtype

static AcDb::SubentType
subtype()
{
	// Query the subentity type
	AcDb::SubentType subType = AcDb::kNullSubentType;
    ACHAR opt[128];
   	while (Adesk::kTrue) {
		acutPrintf(ACRX_T("\nEnter Subent Type: "));
		acedInitGet(NULL, ACRX_T("Edge Face Brep"));
		if (acedGetKword(ACRX_T("Edge/Face/<Brep>: "), opt) == RTCAN) {
			subType = AcDb::kNullSubentType;
			break;
		}

        // Map the user input to a valid subentity type
		if ((_tcscmp(opt, ACRX_T("Brep")) == 0) || (_tcscmp(opt, ACRX_T("")) == 0)) {
			subType = AcDb::kNullSubentType;
			break;
        } else if (_tcscmp(opt, ACRX_T("Face")) == 0) {
			subType = AcDb::kFaceSubentType;
			break;
        } else if (_tcscmp(opt, ACRX_T("Edge")) == 0) {
			subType = AcDb::kEdgeSubentType;
			break;
		}
    }

	return subType;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:29，代码来源:brselect.cpp

示例12: ptContainmentReport

void
ptContainmentReport(AcGe::PointContainment containment,
				    AcBrEntity*			   container)
{
    switch (containment) {
	case(AcGe::kOutside):
		acutPrintf(ACRX_T("\n Point is outside entity boundary\n"));
		break;
	case(AcGe::kInside):
		acutPrintf(ACRX_T("\n Point is inside entity boundary\n"));
		break;     
	case(AcGe::kOnBoundary):
		if (container != NULL) {
			if (container->isKindOf(AcBrFace::desc())) {
				acutPrintf(ACRX_T("\n Point is on a face boundary of entity\n"));
			} else if (container->isKindOf(AcBrEdge::desc())) {
				acutPrintf(ACRX_T("\n Point is on an edge boundary of entity\n"));
			} else if (container->isKindOf(AcBrVertex::desc())) {
				acutPrintf(ACRX_T("\n Point is on a vertex boundary of entity\n"));
			} else acutPrintf(ACRX_T("\n Indeterminate point containment\n"));
		}
		break;        
	default: 
		acutPrintf(ACRX_T("\n Indeterminate point containment\n"));
		break;    
	}

	return;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:29，代码来源:brreport.cpp

示例13: nodeDump

AcBr::ErrorStatus
nodeDump(const AcBrNode& node)
{
	AcBr::ErrorStatus returnValue = AcBr::eOk;

	// Determine the entity which contains this node
	AcBrEntity* entityAssociated = NULL;
	returnValue = node.getEntityAssociated(entityAssociated);
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrNode::getEntityAssociated:"));
		errorReport(returnValue);
		delete entityAssociated;
		return returnValue;
	}
	entityAssociatedReport(entityAssociated);
	delete entityAssociated;

	AcGePoint3d nodePoint;
	returnValue = node.getPoint(nodePoint);
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrNode::getPoint:"));
        errorReport(returnValue);
		return returnValue;
	}
	acutPrintf(ACRX_T("\n Node Point is ("));
	acutPrintf (ACRX_T("%lf, "), nodePoint.x);	
	acutPrintf (ACRX_T("%lf, "), nodePoint.y);
	acutPrintf (ACRX_T("%lf"), nodePoint.z);
	acutPrintf(ACRX_T(")\n"));	
	
	return returnValue;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:32，代码来源:brndump.cpp

示例14: addToDatabase

// Add the given entity to the current Database
Acad::ErrorStatus
addToDatabase(AcDbEntity* pEnt, AcDbObjectId& objId)
{
    Acad::ErrorStatus acadReturnValue = Acad::eOk;
    AcDbBlockTable* pBlockTable;
    AcDbBlockTableRecord* pSpaceRecord;

	AcDbDatabase *pCurDwg = acdbHostApplicationServices()->workingDatabase();
    if (pCurDwg==NULL)
        return Acad::eNoDatabase;

    if ((acadReturnValue = pCurDwg->getBlockTable(pBlockTable,
        AcDb::kForRead)) != Acad::eOk) {
        acutPrintf(ACRX_T("\n acdbCurDwg()->getBlockTable() failed"));
        return acadReturnValue;
    }

    if ((acadReturnValue = pBlockTable->getAt(ACDB_MODEL_SPACE, 
        pSpaceRecord, AcDb::kForWrite)) != Acad::eOk) {
        acutPrintf(ACRX_T("\n AcDbBlockTable::getAt() failed"));
        return acadReturnValue;
    }
 
    // close the block table object
    if ((acadReturnValue = pBlockTable->close()) != Acad::eOk) {
        acutPrintf(ACRX_T("\n AcDbBlockTable::close() failed"));
        return acadReturnValue;
    }

    // append the entity to the display list
    if ((acadReturnValue = pSpaceRecord->appendAcDbEntity(objId, pEnt))
        != Acad::eOk) {
        acutPrintf(ACRX_T("\n AcDbBlockTableRecord::appendAcDbEntity() failed"));
        return acadReturnValue;
    }

    // close the block table record object
    if ((acadReturnValue = pSpaceRecord->close()) != Acad::eOk) {
        acutPrintf(ACRX_T("\n AcDbBlockTableRecord::close() failed"));
        return acadReturnValue;
    }

    return acadReturnValue;
}

开发者ID:Bohr27，项目名称:ObjectARXCore，代码行数:45，代码来源:brdbutl.cpp

示例15: LSS10

void LSS10()
{
	CLogger::Print(_T("-------------| START LOGGING LESSONS 10 |--------------"));
	AcDbObjectId idCircle;
	Acad::ErrorStatus es;
	if (Acad::eOk != (es = createCircle(idCircle))) {
		acutPrintf(ACRX_T("Fail to call createCircle() function - Error: %s")
									, acadErrorStatusText(es));
	}
}

开发者ID:vuonganh1993，项目名称:arxlss，代码行数:10，代码来源:LSS10.cpp

示例16: shellTypeReport

void
shellTypeReport(AcBr::ShellType shellType)
{
    switch (shellType) {
	case(AcBr::kShellUnclassified):
		acutPrintf(ACRX_T(" Shell type cannot be determined at this time\n"));
		break;        
    case(AcBr::kShellExterior):
		acutPrintf(ACRX_T(" This is the exterior shell\n"));
		break;
    case(AcBr::kShellInterior):
		acutPrintf(ACRX_T(" This is an interior shell\n"));
		break;
	default:
		acutPrintf(ACRX_T(" Unexpected shell type encountered\n"));
		break;
	}

	return;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:20，代码来源:brreport.cpp

示例17: printXData

bool printXData()
{
	CLogger::Print(_T("*Call: printxData()"));
	AcDbObject* pObj;
	
	//------------
	// Require to select an entity
	if (!(pObj = selectObject(AcDb::kForRead))) {
		CLogger::Print(_T("*Exit: printxData() - Object have not selected."));
		return false;
	}

	//------------
	// Require to enter xData application name
	ACHAR appname[133];
	if (RTNORM != acedGetString(NULL, ACRX_T("\nEnter the desired Xdata application name: "), appname)) 
	{
		CLogger::Print(_T("*Exit: printxData() - Fail to enter the application name!"));
		return false;
	}

	//------------
	// Read the xData that contained in object.
	// If application name is existing then print out its values.
	struct resbuf* pRb;
	pRb = pObj->xData(appname);
	pObj->close();
	if (pRb) {
		acutPrintf(ACRX_T("Inform: Application name '%s' is existing - The values are: "), appname);
		printList(pRb);
		acutRelRb(pRb); // release xData after using!
	} else {
		acutPrintf(ACRX_T("\n*Exit: printxData() - Application name '%s' is not existing."), appname);
		pObj->close();
		return false;
	}

	pObj->close();
	CLogger::Print(_T("*Exit: printxData()"));
	return true;
}

开发者ID:vuonganh1993，项目名称:arxlss，代码行数:41，代码来源:LSS02.cpp

示例18: pointContainment

void
pointContainment()
{
    AcBr::ErrorStatus returnValue = AcBr::eOk;

	// Select the entity by type
	AcBrEntity* pEnt = NULL;
	AcDb::SubentType subType = AcDb::kNullSubentType;
	returnValue = selectEntityByType(pEnt, subType);
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in selectEntityByType:"));
		errorReport(returnValue);
		delete pEnt;
    	return;
    }

	// Query the point by AutoCAD pick
	AcGePoint3d testPt;
	acedGetPoint(NULL, ACRX_T("\n Pick point for containment test: \n"), asDblArray(testPt));

    AcGe::PointContainment containment = AcGe::kOutside;
    AcBrEntity* container = NULL;

    returnValue = pEnt->getPointContainment(testPt, containment, container);
    if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrEntity::getPointContainment:"));
		errorReport(returnValue);
		delete pEnt;
    	return;
    }

    ptContainmentReport(containment, container);

	delete container;
	delete pEnt;

	return;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:38，代码来源:brptcnt.cpp

示例19: loopTypeReport

void
loopTypeReport(AcBr::LoopType loopType)
{
    switch (loopType) {
	case(AcBr::kLoopUnclassified):
		acutPrintf(ACRX_T(" Loop type cannot be determined at this time, or is ambiguous\n"));
		break;        
    case(AcBr::kLoopExterior):
		acutPrintf(ACRX_T(" This is the exterior loop\n"));
		break;
    case(AcBr::kLoopInterior):
		acutPrintf(ACRX_T(" This is an interior loop\n"));
		break;
    case(AcBr::kLoopWinding):
		acutPrintf(ACRX_T(" This is a winding loop on an analytic surface\n"));
		break;
	default:
		acutPrintf(ACRX_T(" Unexpected loop type encountered\n"));
		break;
	}

	return;
}

开发者ID:FengLuanShuangWu，项目名称:AutoCADPlugin-HeatSource，代码行数:23，代码来源:brreport.cpp

示例20: getNativeSurface

// Utility function to extract a useful, unbounded surface with native
// surface definition data, from the external bounded surface
AcBr::ErrorStatus
getNativeSurface(const AcBrFace& faceEntity,
                 AcGeSurface*&   surfaceGeometry,
                 AcGeSurface*&   nativeGeometry)
{
    AcBr::ErrorStatus returnValue = faceEntity.getSurface(surfaceGeometry);  
	if (returnValue != AcBr::eOk) {
		acutPrintf(ACRX_T("\n Error in AcBrFace::getSurface:"));
    	errorReport(returnValue);
        return returnValue;
	}
	if (surfaceGeometry == NULL) {
		acutPrintf(ACRX_T("\n getNativeSurface: external bounded surface is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (surfaceGeometry->type() != kExternalBoundedSurface) {
		acutPrintf(ACRX_T("\n getNativeSurface: surface is not an external bounded surface\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	AcGeExternalSurface baseGeometry;
	((AcGeExternalBoundedSurface*)surfaceGeometry)->getBaseSurface(baseGeometry);
	if (!baseGeometry.isDefined()) {
		acutPrintf(ACRX_T("\n getNativeSurface: external surface is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
	if (!baseGeometry.isNativeSurface(nativeGeometry)
	    || (nativeGeometry == NULL)) {
		acutPrintf(ACRX_T("\n getNativeSurface: native surface is undefined\n"));
        returnValue = AcBr::eMissingGeometry;
        return returnValue;
	}
    return returnValue;
}

开发者ID:Bohr27，项目名称:ObjectARXCore，代码行数:38，代码来源:brgeutl.cpp

注：本文中的ACRX_T函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ACS_SHORT_LOG函数代码示例发布时间：2022-05-30

C++ ACQUIRE_LOCK函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18436|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9749|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8228|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8589|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8502|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9464|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8483|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7909|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8465|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7433|2022-11-06

客服电话

电子邮件

C++ ACRX_T函数代码示例

示例1: getNativeCurve

示例2: getNativeParamCurve

示例3: countShells

示例4: countComplexes

示例5: asdktest3

示例6: dumpModel

示例7: pickViewport

示例8: entityAssociatedReport

示例9: bblockReport

示例10: listFiles

示例11: subtype

示例12: ptContainmentReport

示例13: nodeDump

示例14: addToDatabase

示例15: LSS10

示例16: shellTypeReport

示例17: printXData

示例18: pointContainment

示例19: loopTypeReport

示例20: getNativeSurface

请发表评论

全部评论

上一篇：

下一篇：

GitbookIO/gitbook:

juleswhite/mobile-cloud-asgn1

kyamagu/matlab-json: Use official API: h

墙壁眼睛膝盖

微信小程序 - app.json配置解析

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053