C++ AJ_DeliverMsg函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中AJ_DeliverMsg函数的典型用法代码示例。如果您正苦于以下问题：C++ AJ_DeliverMsg函数的具体用法？C++ AJ_DeliverMsg怎么用？C++ AJ_DeliverMsg使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了AJ_DeliverMsg函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: AJ_PeerAuthenticate

AJ_Status AJ_PeerAuthenticate(AJ_BusAttachment* bus, const char* peerName, AJ_PeerAuthenticateCallback callback, void* cbContext)
{
    AJ_Message msg;
    char guidStr[33];
    AJ_GUID localGuid;
    uint32_t version = REQUIRED_AUTH_VERSION;

    /*
     * Check there isn't an authentication in progress
     */
    if (authContext.callback || authContext.peerGuid) {
        /*
         * The existing authentication may have timed-out
         */
        if (AJ_GetElapsedTime(&authContext.timer, TRUE) < MAX_AUTH_TIME) {
            return AJ_ERR_RESOURCES;
        }
        /*
         * Report the failed authentication
         */
        PeerAuthComplete(AJ_ERR_TIMEOUT);
    }
    authContext.callback = callback;
    authContext.cbContext = cbContext;
    authContext.peerName = peerName;
    AJ_InitTimer(&authContext.timer);
    /*
     * Kick off autnetication with an ExchangeGUIDS method call
     */
    AJ_MarshalMethodCall(bus, &msg, AJ_METHOD_EXCHANGE_GUIDS, peerName, 0, AJ_NO_FLAGS, CALL_TIMEOUT);
    AJ_GetLocalGUID(&localGuid);
    AJ_GUID_ToString(&localGuid, guidStr, sizeof(guidStr));
    AJ_MarshalArgs(&msg, "su", guidStr, version);
    return AJ_DeliverMsg(&msg);
}

开发者ID:bigzero，项目名称:ajtcl，代码行数:35，代码来源:aj_peer.c

示例2: AppHandleCat

AJ_Status AppHandleCat(AJ_Message* msg)
{
    AJ_Status status = AJ_OK;
    AJ_Message reply;
    char* partA;
    char* partB;
    char* totalString;
    AJ_AlwaysPrintf(("%s:%d:%s %d\n", __FILE__, __LINE__, __FUNCTION__, 0));

    AJ_UnmarshalArgs(msg, "ss", &partA, &partB);

    totalString = (char*) AJ_Malloc(strlen(partA) + strlen(partB) + 1);
    if (!totalString) {
        return AJ_ERR_RESOURCES;
    }
    strcpy(totalString, partA);
    strcpy(totalString + strlen(partA), partB);

    AJ_MarshalReplyMsg(msg, &reply);
    AJ_MarshalArgs(&reply, "s", totalString);

    status = AJ_DeliverMsg(&reply);
    AJ_Free(totalString);
    return status;
}

开发者ID:fonlabs，项目名称:ajtcl，代码行数:25，代码来源:bastress2.c

示例3: EventsAndActionsMessageProcessor

AJSVC_ServiceStatus EventsAndActionsMessageProcessor(AJ_BusAttachment* busAttachment, AJ_Message* msg, AJ_Status* msgStatus)
{
    AJ_Message reply;
    AJSVC_ServiceStatus serviceStatus = AJSVC_SERVICE_STATUS_HANDLED;

    switch (msg->msgId) {
    case EVENTSANDACTIONS_GET_PROP:
        *msgStatus = AJ_BusPropGet(msg, EventsAndActionsPropGetHandler, NULL);
        break;

    case EVENTSANDACTIONS_SET_PROP:
        *msgStatus = AJ_BusPropSet(msg, EventsAndActionsPropSetHandler, NULL);
        break;

    case ACTIONS_SETMODETOAUTO:
    case ACTIONS_SETMODETOCOOL:
    case ACTIONS_SETMODETOHEAT:
    case ACTIONS_SETMODETOFAN:
    case ACTIONS_SETMODETOOFF:
        AJ_MarshalReplyMsg(msg, &reply);
        setCurrentMode((msg->msgId & 0xFF) - (ACTIONS_SETMODETOAUTO & 0xFF));
        *msgStatus = AJ_DeliverMsg(&reply);
        break;

    default:
        serviceStatus = AJSVC_SERVICE_STATUS_NOT_HANDLED;
        break;
    }

    return serviceStatus;
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:31，代码来源:EventsAndActionsSample.c

示例4: AJ_BusSetSignalRuleSerial

AJ_Status AJ_BusSetSignalRuleSerial(AJ_BusAttachment* bus, const char* ruleString, uint8_t rule, uint8_t flags, uint32_t* serialNum)
{
    AJ_Status status;
    AJ_Message msg;
    uint32_t msgId = (rule == AJ_BUS_SIGNAL_ALLOW) ? AJ_METHOD_ADD_MATCH : AJ_METHOD_REMOVE_MATCH;

    AJ_InfoPrintf(("AJ_BusSetSignalRuleSerial(bus=0x%p, ruleString=\"%s\", rule=%d.)\n", bus, ruleString, rule));

    status = AJ_MarshalMethodCall(bus, &msg, msgId, AJ_DBusDestination, 0, flags, AJ_METHOD_TIMEOUT);
    if (status == AJ_OK) {
        uint32_t sz = 0;
        uint8_t nul = 0;
        if (serialNum) {
            *serialNum = msg.hdr->serialNum;
        }
        sz = (uint32_t)strlen(ruleString);
        status = AJ_DeliverMsgPartial(&msg, sz + 5);
        AJ_MarshalRaw(&msg, &sz, 4);
        AJ_MarshalRaw(&msg, ruleString, strlen(ruleString));
        AJ_MarshalRaw(&msg, &nul, 1);
    }
    if (status == AJ_OK) {
        status = AJ_DeliverMsg(&msg);
    }
    return status;
}

开发者ID:durake，项目名称:core-ajtcl，代码行数:26，代码来源:aj_bus.c

示例5: SendEvent

static AJ_Status SendEvent(AJ_BusAttachment* busAttachment, uint32_t eventId)
{
    AJ_Status status = AJ_OK;
    AJ_Message msg;

    status = AJ_MarshalSignal(busAttachment, &msg, eventId, NULL, 0, AJ_FLAG_SESSIONLESS, 0);
    if (status != AJ_OK) {
        goto ErrorExit;
    }
    status = AJ_DeliverMsg(&msg);
    if (status != AJ_OK) {
        goto ErrorExit;
    }
    status = AJ_CloseMsg(&msg);
    if (status != AJ_OK) {
        goto ErrorExit;
    }
    AJ_AlwaysPrintf(("Event sent successfully\n"));
    return status;

ErrorExit:

    AJ_AlwaysPrintf(("Event sending failed with status=%s\n", AJ_StatusText(status)));
    return status;
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:25，代码来源:EventsAndActionsSample.c

示例6: AppHandleCat

static AJ_Status AppHandleCat(AJ_Message* msg)
{
#define BUFFER_SIZE 256
    const char* string0;
    const char* string1;
    char buffer[BUFFER_SIZE];
    AJ_Message reply;
    AJ_Arg replyArg;

    AJ_UnmarshalArgs(msg, "ss", &string0, &string1);
    AJ_MarshalReplyMsg(msg, &reply);

    /* We have the arguments. Now do the concatenation. */
    strncpy(buffer, string0, BUFFER_SIZE);
    buffer[BUFFER_SIZE - 1] = '\0';
    strncat(buffer, string1, BUFFER_SIZE - strlen(buffer));
    buffer[BUFFER_SIZE - 1] = '\0';

    AJ_InitArg(&replyArg, AJ_ARG_STRING, 0, buffer, 0);
    AJ_MarshalArg(&reply, &replyArg);

    return AJ_DeliverMsg(&reply);

#undef BUFFER_SIZE
}

开发者ID:CasyWang，项目名称:Triton，代码行数:25，代码来源:basic_service.cpp

示例7: AJ_BusAddSignalRule

AJ_Status AJ_BusAddSignalRule(AJ_BusAttachment* bus, const char* signalName, const char* interfaceName, uint8_t rule)
{
    AJ_Status status;
    AJ_Message msg;
    const char* str[5];
    uint32_t msgId = (rule == AJ_BUS_SIGNAL_ALLOW) ? AJ_METHOD_ADD_MATCH : AJ_METHOD_REMOVE_MATCH;

    AJ_InfoPrintf(("AJ_BusAddSignalRule(bus=0x%p, signalName=\"%s\", interfaceName=\"%s\", rule=%d.)\n", bus, signalName, interfaceName, rule));

    str[0] = "type='signal',member='";
    str[1] = signalName;
    str[2] = "'interface='";
    str[3] = interfaceName;
    str[4] = "'";

    status = AJ_MarshalMethodCall(bus, &msg, msgId, AJ_DBusDestination, 0, 0, AJ_METHOD_TIMEOUT);
    if (status == AJ_OK) {
        size_t i;
        uint32_t sz = 0;
        uint8_t nul = 0;
        for (i = 0; i < ArraySize(str); ++i) {
            sz += (uint32_t)strlen(str[i]);
        }
        status = AJ_DeliverMsgPartial(&msg, sz + 5);
        AJ_MarshalRaw(&msg, &sz, 4);
        for (i = 0; i < ArraySize(str); ++i) {
            AJ_MarshalRaw(&msg, str[i], strlen(str[i]));
        }
        AJ_MarshalRaw(&msg, &nul, 1);
    }
    if (status == AJ_OK) {
        status = AJ_DeliverMsg(&msg);
    }
    return status;
}

开发者ID:jchuang1977，项目名称:alljoyn_14.02_thin_client，代码行数:35，代码来源:aj_bus.c

示例8: ExecuteAction

AJ_Status ExecuteAction(AJ_Message* msg, uint32_t msgId, ExecuteActionContext* context)
{
    AJ_Message reply;
    AJ_MarshalReplyMsg(msg, &reply);

    switch (msgId) {
    case EN_MYDEVICE_OVENACTION_EXEC:
    case DE_AT_MYDEVICE_OVENACTION_EXEC:
        {
            AJ_InfoPrintf(("Starting the Oven. Execute was called\n"));
        }
        break;

    case EN_MYDEVICE_LIGHTCONFIRM_EXEC_ACTION1:
    case DE_AT_MYDEVICE_LIGHTCONFIRM_EXEC_ACTION1:
        {
            AJ_InfoPrintf(("Execute Action1 was called\n"));
        }
        break;

    case EN_MYDEVICE_LIGHTCONFIRM_EXEC_ACTION2:
    case DE_AT_MYDEVICE_LIGHTCONFIRM_EXEC_ACTION2:
        {
            AJ_InfoPrintf(("Execute Action2 was called\n"));
        }
        break;

    case EN_MYDEVICE_LIGHTCONFIRM_EXEC_ACTION3:
    case DE_AT_MYDEVICE_LIGHTCONFIRM_EXEC_ACTION3:
        {
            AJ_InfoPrintf(("Execute Action3 was called\n"));
        }
        break;

    case EN_MYDEVICE_AREYOUSURE_EXEC_ACTION1:
    case DE_AT_MYDEVICE_AREYOUSURE_EXEC_ACTION1:
        {
            AJ_InfoPrintf(("Execute Action1 was called\n")); addDismissSignal(context, MYDEVICE_NOTIFICATION_ACTION_AREYOUSURE_SIGNAL_DISMISS);
        }
        break;

    case EN_MYDEVICE_AREYOUSURE_EXEC_ACTION2:
    case DE_AT_MYDEVICE_AREYOUSURE_EXEC_ACTION2:
        {
            AJ_MarshalErrorMsg(msg, &reply, AJ_ErrServiceUnknown);
        }
        break;

    case EN_MYDEVICE_AREYOUSURE_EXEC_ACTION3:
    case DE_AT_MYDEVICE_AREYOUSURE_EXEC_ACTION3:
        {
            AJ_MarshalErrorMsg(msg, &reply, AJ_ErrServiceUnknown);
        }
        break;


    }

    return AJ_DeliverMsg(&reply);
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:60，代码来源:ControlPanelGenerated.c

示例9: AJNS_Producer_SendNotifySignal

/**
 * Send notify signal
 */
static AJ_Status AJNS_Producer_SendNotifySignal(AJ_BusAttachment* busAttachment, AJNS_Notification* notification, uint32_t ttl, uint32_t* messageSerialNumber)
{
    AJ_Status status;
    AJ_Message msg;
    uint32_t serialNum;

//    AJ_InfoPrintf(("In SendNotifySignal\n"));
    status = AJNS_Producer_MarshalNotificationMsg(busAttachment, &msg, notification, ttl);
    if (status != AJ_OK) 
	{
 //       AJ_InfoPrintf(("Could not Marshal Message\n"));
        return status;
    }
    serialNum = msg.hdr->serialNum;
    status = AJ_DeliverMsg(&msg);
    if (status != AJ_OK) 
	{
        AJ_ErrPrintf(("Could not Deliver Message\n"));
        return status;
    }
 //   AJ_InfoPrintf(("***************** Notification id %d delivered successfully with serial number %u *****************\n", notification->notificationId, serialNum));
    if (messageSerialNumber != NULL)
	{
        *messageSerialNumber = serialNum;
    }

    AJ_CloseMsg(&msg);

    return status;
}

开发者ID:marus-ka，项目名称:alljoyn_lsf_lamp，代码行数:33，代码来源:NotificationProducer.c

示例10: CPS_IdleConnectedHandler

void CPS_IdleConnectedHandler(AJ_BusAttachment*bus)
{
    if (runningTestNum == lastTestRun || CPSsessionId == 0) {
        return;
    }

    if (runningTestNum == numTests) {
        runningTestNum = 0;
        AJ_InfoPrintf(("Finished running all the tests\n"));
        exit(0);
    }

    AJ_Status status;
    AJ_Message msg;

    status = AJ_MarshalMethodCall(&busAttachment, &msg, testsToRun[runningTestNum].msgId,
                                  announceSender, CPSsessionId, 0, CPSC_CONNECT_TIMEOUT);

    uint16_t numParam;
    for (numParam = 0; numParam < testsToRun[runningTestNum].numParams; numParam++) {
        if (status == AJ_OK) {
            status = AJ_MarshalArgs(&msg, "q", testsToRun[runningTestNum].param[numParam]);
        }
    }

    if (status == AJ_OK) {
        status = AJ_DeliverMsg(&msg);
        lastTestRun = runningTestNum;
    }

    AJ_InfoPrintf(("MakeMethodCall() test number %i resulted in a status of %s.\n", lastTestRun + 1, AJ_StatusText(status)));
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:32，代码来源:ControlPanelClient.c

示例11: AJNS_Consumer_SendDismissRequest

AJ_Status AJNS_Consumer_SendDismissRequest(AJ_BusAttachment* busAttachment, uint16_t version, int32_t notificationId, const char* appId, const char* senderName, uint32_t sessionId)
{
    AJ_Status status = AJ_OK;

    if ((status == AJ_OK) && (sessionId != 0)) {
        AJ_Message dismissMsg;
        status = AJ_MarshalMethodCall(busAttachment, &dismissMsg, NOTIFICATION_PRODUCER_DISMISS_PROXY, senderName, sessionId, AJ_NO_FLAGS, AJ_CALL_TIMEOUT);
        if (status != AJ_OK) {
            AJ_ErrPrintf(("Could not marshal method call\n"));
            return status;
        }
        status = AJ_MarshalArgs(&dismissMsg, "i", notificationId);
        if (status != AJ_OK) {
            AJ_ErrPrintf(("Could not marshal arguments\n"));
            return status;
        }
        status = AJ_DeliverMsg(&dismissMsg);
        if (status != AJ_OK) {
            AJ_ErrPrintf(("Could not deliver message\n"));
            return status;
        }
        AJ_CloseMsg(&dismissMsg);
    }

    return status;
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:26，代码来源:NotificationConsumer.c

示例12: AppHandlePing

static AJ_Status AppHandlePing(AJ_Message* msg)
{
    AJ_Status status;
    AJ_Message reply;
    AJ_Arg arg;

    status = AJ_UnmarshalArg(msg, &arg);

    if (AJ_OK == status) {

        if (arg.typeId == AJ_ARG_STRING) {
            AJ_Printf("Received ping request '%s'.\n", arg.val.v_string);
        } else {
            AJ_Printf("Unexpected arg type '%d' in ping request.\n", arg.typeId);
        }

        status = AJ_MarshalReplyMsg(msg, &reply);

        if (AJ_OK == status) {
            /*
             * Just return the arg we received
             */
            status = AJ_MarshalArg(&reply, &arg);

            if (AJ_OK == status) {
                status = AJ_DeliverMsg(&reply);
            }
        }
    }

    return status;
}

开发者ID:CasyWang，项目名称:Triton，代码行数:32，代码来源:SecureService.cpp

示例13: SendPing

AJ_Status SendPing(AJ_BusAttachment* bus, uint32_t sessionId)
{
    AJ_Status status;
    AJ_Message msg;

    AJ_AlwaysPrintf(("Sending ping request '%s'.\n", pingString));

    status = AJ_MarshalMethodCall(bus,
                                  &msg,
                                  PRX_PING,
                                  fullServiceName,
                                  sessionId,
                                  AJ_FLAG_ENCRYPTED,
                                  METHOD_TIMEOUT);
    if (AJ_OK == status) {
        status = AJ_MarshalArgs(&msg, "s", pingString);
    } else {
        AJ_InfoPrintf(("In SendPing() AJ_MarshalMethodCall() status = %d.\n", status));
    }

    if (AJ_OK == status) {
        status = AJ_DeliverMsg(&msg);
    } else {
        AJ_InfoPrintf(("In SendPing() AJ_MarshalArgs() status = %d.\n", status));
    }

    if (AJ_OK != status) {
        AJ_InfoPrintf(("In SendPing() AJ_DeliverMsg() status = %d.\n", status));
    }

    return status;
}

开发者ID:durake，项目名称:core-ajtcl，代码行数:32，代码来源:SecureClient.c

示例14: AJCFG_GetConfigurationsHandler

AJ_Status AJCFG_GetConfigurationsHandler(AJ_Message* msg)
{
    AJ_Status status = AJ_OK;
    AJ_Message reply;
    char* language;
    int8_t langIndex = AJSVC_PROPERTY_STORE_ERROR_LANGUAGE_INDEX;
    AJSVC_PropertyStoreCategoryFilter filter;

    AJ_InfoPrintf(("Handling GetConfigurations request\n"));

    memset(&filter, 0, sizeof(AJSVC_PropertyStoreCategoryFilter));
    filter.bit1Config = TRUE;
    status = AJ_UnmarshalArgs(msg, "s", &language);
    if (status != AJ_OK) {
        return status;
    }
    if (AJSVC_IsLanguageSupported(msg, &reply, language, &langIndex)) {
        status = AJ_MarshalReplyMsg(msg, &reply);
        if (status != AJ_OK) {
            return status;
        }
        status = AJSVC_PropertyStore_ReadAll(&reply, filter, langIndex);
        if (status != AJ_OK) {
            return status;
        }
    }
    status = AJ_DeliverMsg(&reply);
    if (status != AJ_OK) {
        return status;
    }

    return status;
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:33，代码来源:ConfigService.c

示例15: AJSUSI_VgaGetBacklightBrightness_Handler

AJ_Status AJSUSI_VgaGetBacklightBrightness_Handler(AJ_Message* msg)
{
    AJ_Status status = AJ_OK;
    AJ_Message reply;
    AJ_Arg replyArg;
    uint32_t id, bright;

    //Get Args
    status = AJ_UnmarshalArgs(msg, "u", &id);
    if (status != AJ_OK) {
        return status;
    }
    AJ_InfoPrintf(("%s : id=%d\n", __func__, id));

    //SUSI API
    if (AJ_SusiVgaGetBacklightBrightness(id, &bright)) {
        AJ_MarshalErrorMsg(msg, &reply, AJ_ErrFeatureNotAvailable);
        return AJ_DeliverMsg(&reply);
    }

    //Status Reply
    AJ_InfoPrintf(("%s : ret=0x%x\n", __func__, bright));
    AJ_InitArg(&replyArg, AJ_ARG_UINT32, 0, &bright, 0);
    return SendReplyMsg(msg, &replyArg);
}

开发者ID:ADVANTECH-Corp，项目名称:AlljoynSusiService，代码行数:25，代码来源:SusiVGA.c

示例16: AJOBS_GetScanInfoHandler

AJ_Status AJOBS_GetScanInfoHandler(AJ_Message* msg)
{
    AJ_Status status = AJ_OK;
    AJ_Message reply;
    AJ_Arg array;
    AJ_Arg structure;
    uint32_t elapsed;

    AJ_InfoPrintf(("Handling GetScanInfo request\n"));

    status = AJ_MarshalReplyMsg(msg, &reply);
    if (status != AJ_OK) {
        return status;
    }

    elapsed = AJ_GetElapsedTime(AJOBS_GetLastScanTime(), TRUE);
    if (elapsed > 0) {
        elapsed /= 60000;
    }
    status = AJ_MarshalArgs(&reply, "q", (uint16_t) elapsed);
    if (status != AJ_OK) {
        return status;
    }
    status = AJ_MarshalContainer(&reply, &array, AJ_ARG_ARRAY);
    if (status != AJ_OK) {
        return status;
    }

    int i = 0;
    for (; i < AJOBS_GetScanInfoCount(); ++i) {
        status = AJ_MarshalContainer(&reply, &structure, AJ_ARG_STRUCT);
        if (status != AJ_OK) {
            return status;
        }
        status = AJ_MarshalArgs(&reply, "s", (AJOBS_GetScanInfos())[i].ssid);
        if (status != AJ_OK) {
            return status;
        }
        status = AJ_MarshalArgs(&reply, "n", (AJOBS_GetScanInfos())[i].authType);
        if (status != AJ_OK) {
            return status;
        }
        status = AJ_MarshalCloseContainer(&reply, &structure);
        if (status != AJ_OK) {
            return status;
        }
    }

    status = AJ_MarshalCloseContainer(&reply, &array);
    if (status != AJ_OK) {
        return status;
    }
    status = AJ_DeliverMsg(&reply);
    if (status != AJ_OK) {
        return status;
    }

    return status;
}

开发者ID:avernon，项目名称:asl_distribution，代码行数:59，代码来源:OnboardingService.c

示例17: AppHandleOnOff

static AJ_Status AppHandleOnOff(AJ_Message* msg, uint8_t on)
{
    AJ_Message reply;

    AJ_AlwaysPrintf(("AppHandleOnOff(%u)\n", on));
    DUE_led(on);

    AJ_MarshalReplyMsg(msg, &reply);
    return AJ_DeliverMsg(&reply);
}

开发者ID:durake，项目名称:core-ajtcl，代码行数:10，代码来源:due_led.cpp

示例18: AJ_BusReplyAcceptSession

AJ_Status AJ_BusReplyAcceptSession(AJ_Message* msg, uint32_t accept)
{
    AJ_Message reply;

    AJ_InfoPrintf(("AJ_BusReplyAcceptSession(msg=0x%p, accept=%d.)\n", msg, accept));

    AJ_MarshalReplyMsg(msg, &reply);
    AJ_MarshalArgs(&reply, "b", accept);
    return AJ_DeliverMsg(&reply);
}

开发者ID:jchuang1977，项目名称:alljoyn_14.02_thin_client，代码行数:10，代码来源:aj_bus.c

示例19: SendHello

static AJ_Status SendHello(AJ_BusAttachment* bus)
{
    AJ_Status status;
    AJ_Message msg;

    status = AJ_MarshalMethodCall(bus, &msg, AJ_METHOD_HELLO, AJ_DBusDestination, 0, AJ_FLAG_ALLOW_REMOTE_MSG, 5000);
    if (status == AJ_OK) {
        status = AJ_DeliverMsg(&msg);
    }
    return status;
}

开发者ID:reignme，项目名称:ajtcl，代码行数:11，代码来源:aj_connect.c

示例20: ExecuteAction

AJ_Status ExecuteAction(AJ_Message* msg, uint32_t msgId, ExecuteActionContext* context)
{
    AJ_Message reply;
    AJ_MarshalReplyMsg(msg, &reply);

    switch (msgId) {
//EXECUTE_ACTION_GO_HERE
    }

    return AJ_DeliverMsg(&reply);
}

开发者ID:dengcj0，项目名称:QCA4010，代码行数:11，代码来源:PreGenControlPanelGenerated.c

注：本文中的AJ_DeliverMsg函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ AJ_ErrPrintf函数代码示例发布时间：2022-05-30

C++ AJ_AlwaysPrintf函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18443|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9750|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8230|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8590|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8503|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9467|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8484|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7910|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8466|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7435|2022-11-06

客服电话

电子邮件

C++ AJ_DeliverMsg函数代码示例

示例1: AJ_PeerAuthenticate

示例2: AppHandleCat

示例3: EventsAndActionsMessageProcessor

示例4: AJ_BusSetSignalRuleSerial

示例5: SendEvent

示例6: AppHandleCat

示例7: AJ_BusAddSignalRule

示例8: ExecuteAction

示例9: AJNS_Producer_SendNotifySignal

示例10: CPS_IdleConnectedHandler

示例11: AJNS_Consumer_SendDismissRequest

示例12: AppHandlePing

示例13: SendPing

示例14: AJCFG_GetConfigurationsHandler

示例15: AJSUSI_VgaGetBacklightBrightness_Handler

示例16: AJOBS_GetScanInfoHandler

示例17: AppHandleOnOff

示例18: AJ_BusReplyAcceptSession

示例19: SendHello

示例20: ExecuteAction

请发表评论

全部评论

上一篇：

下一篇：

序言 - Kubernetes 实践指南

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053