本文整理汇总了C++中APR_BUCKET_NEXT函数的典型用法代码示例。如果您正苦于以下问题:C++ APR_BUCKET_NEXT函数的具体用法?C++ APR_BUCKET_NEXT怎么用?C++ APR_BUCKET_NEXT使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了APR_BUCKET_NEXT函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: test_truncfile
/* Regression test for PR 34708, where a file bucket will keep
* duplicating itself on being read() when EOF is reached
* prematurely. */
static void test_truncfile(abts_case *tc, void *data)
{
apr_bucket_alloc_t *ba = apr_bucket_alloc_create(p);
apr_bucket_brigade *bb = apr_brigade_create(p, ba);
apr_file_t *f = make_test_file(tc, "testfile.txt", "hello");
apr_bucket *e;
const char *buf;
apr_size_t len;
apr_brigade_insert_file(bb, f, 0, 5, p);
apr_file_trunc(f, 0);
e = APR_BRIGADE_FIRST(bb);
ABTS_ASSERT(tc, "single bucket in brigade",
APR_BUCKET_NEXT(e) == APR_BRIGADE_SENTINEL(bb));
apr_bucket_file_enable_mmap(e, 0);
ABTS_ASSERT(tc, "read gave APR_EOF",
apr_bucket_read(e, &buf, &len, APR_BLOCK_READ) == APR_EOF);
ABTS_ASSERT(tc, "read length 0", len == 0);
ABTS_ASSERT(tc, "still a single bucket in brigade",
APR_BUCKET_NEXT(e) == APR_BRIGADE_SENTINEL(bb));
apr_file_close(f);
apr_brigade_destroy(bb);
apr_bucket_alloc_destroy(ba);
}
开发者ID:QsBBQ,项目名称:masspinger,代码行数:35,代码来源:testbuckets.c
示例2: find_policy_file_request
/**
* Searches the input request for a flash socket policy request. This request,
* unfortunately, does not follow the HTTP protocol and cannot be handled
* via a special HTTP handler. Instead, it is a short xml string followed by
* a null character:
*
* '<policy-file-request/>\0'
*
* A peek into the incoming data checks the first character of the stream to
* see if it is '<' (as opposed to typically something else for HTTP). If it
* is not, then this function returns and HTTP input is read normally. If it
* is, then the remaining bytes in the policy-file-request are read and
* checked. If a match is found, then the filter state will be updated to
* inform the output filter to send a cross-domain policy as a response. If
* no match is found, HTTP traffic will proceed as usual.
*
* @param f the input filter.
* @param state the filter state.
*
* @return APR_SUCCESS on success, some other status on failure.
*/
static apr_status_t find_policy_file_request(
ap_filter_t* f, filter_state* state)
{
apr_status_t rval = APR_SUCCESS;
// create a temp buffer for speculative reads
apr_bucket_brigade* tmp = apr_brigade_create(f->c->pool, f->c->bucket_alloc);
// FIXME: not sure how blocking mode works ... can it return fewer than
// the number of specified bytes?
// peek at the first PFR_LENGTH bytes
rval = ap_get_brigade(
f->next, tmp, AP_MODE_SPECULATIVE, APR_BLOCK_READ, PFR_LENGTH);
if(rval == APR_SUCCESS)
{
// quickly check the first bucket for the beginning of a pfr
const char* data;
apr_size_t length;
apr_bucket* b = APR_BRIGADE_FIRST(tmp);
rval = apr_bucket_read(b, &data, &length, APR_BLOCK_READ);
if(rval == APR_SUCCESS && length > 0 && data[0] == '<')
{
// possible policy file request, fill local buffer
char pfr[PFR_LENGTH];
char* ptr = pfr;
memcpy(ptr, data, length);
ptr += length;
memset(ptr, '\0', PFR_LENGTH - length);
b = APR_BUCKET_NEXT(b);
while(rval == APR_SUCCESS && b != APR_BRIGADE_SENTINEL(tmp))
{
rval = apr_bucket_read(b, &data, &length, APR_BLOCK_READ);
if(rval == APR_SUCCESS)
{
memcpy(ptr, data, length);
ptr += length;
b = APR_BUCKET_NEXT(b);
}
}
if(rval == APR_SUCCESS)
{
// see if pfr is a policy file request: '<policy-file-request/>\0'
if((ptr - pfr == PFR_LENGTH) && (pfr[PFR_LENGTH - 1] == '\0') &&
(strncmp(pfr, "<policy-file-request/>", PFR_LENGTH -1) == 0))
{
// pfr found
state->found = 1;
}
}
}
}
return rval;
}
开发者ID:0anasm,项目名称:titanium_mobile,代码行数:77,代码来源:mod_fsp.c
示例3: APU_DECLARE
APU_DECLARE(apr_status_t) apr_brigade_to_iovec(apr_bucket_brigade *b,
struct iovec *vec, int *nvec)
{
int left = *nvec;
apr_bucket *e;
struct iovec *orig;
apr_size_t iov_len;
apr_status_t rv;
orig = vec;
for (e = APR_BRIGADE_FIRST(b);
e != APR_BRIGADE_SENTINEL(b);
e = APR_BUCKET_NEXT(e))
{
if (left-- == 0)
break;
rv = apr_bucket_read(e, (const char **)&vec->iov_base, &iov_len,
APR_NONBLOCK_READ);
if (rv != APR_SUCCESS)
return rv;
vec->iov_len = iov_len; /* set indirectly in case size differs */
++vec;
}
*nvec = vec - orig;
return APR_SUCCESS;
}
开发者ID:AbrahamJewowich,项目名称:FreeSWITCH,代码行数:29,代码来源:apr_brigade.c
示例4: h2_util_bl_print
apr_size_t h2_util_bl_print(char *buffer, apr_size_t bmax,
const char *tag, const char *sep,
h2_blist *bl)
{
apr_size_t off = 0;
const char *sp = "";
apr_bucket *b;
if (bl) {
memset(buffer, 0, bmax--);
off += apr_snprintf(buffer+off, bmax-off, "%s(", tag);
for (b = H2_BLIST_FIRST(bl);
bmax && (b != H2_BLIST_SENTINEL(bl));
b = APR_BUCKET_NEXT(b)) {
off += h2_util_bucket_print(buffer+off, bmax-off, b, sp);
sp = " ";
}
off += apr_snprintf(buffer+off, bmax-off, ")%s", sep);
}
else {
off += apr_snprintf(buffer+off, bmax-off, "%s(null)%s", tag, sep);
}
return off;
}
开发者ID:yewang15215,项目名称:mod_h2,代码行数:25,代码来源:h2_bucket_beam.c
示例5: modperl_brigade_dump
void modperl_brigade_dump(apr_bucket_brigade *bb, apr_file_t *file)
{
apr_bucket *bucket;
int i = 0;
#ifndef WIN32
if (file == NULL) {
file = modperl_global_get_server_rec()->error_log;
}
apr_file_printf(file, "dump of brigade 0x%lx\n", (unsigned long)bb);
for (bucket = APR_BRIGADE_FIRST(bb);
bucket != APR_BRIGADE_SENTINEL(bb);
bucket = APR_BUCKET_NEXT(bucket))
{
apr_file_printf(file,
" %d: bucket=%s(0x%lx), length=%ld, data=0x%lx\n",
i, bucket->type->name,
(unsigned long)bucket,
(long)bucket->length,
(unsigned long)bucket->data);
/* apr_file_printf(file, " : %s\n", (char *)bucket->data); */
i++;
}
#endif
}
开发者ID:gitpan,项目名称:mod_perl,代码行数:27,代码来源:modperl_filter.c
示例6: read_msg
static int read_msg(request_rec *r, msg_t **msg)
{
conn_rec *c = r->connection;
apr_bucket_brigade *bb = apr_brigade_create(r->pool, c->bucket_alloc);
char *dbuf = apr_palloc(r->pool, MAX_MSG_SIZE);
int dbpos = 0;
int seen_eos = 0;
do {
apr_status_t rv;
apr_bucket *bucket;
rv = ap_get_brigade(r->input_filters, bb, AP_MODE_READBYTES,
APR_BLOCK_READ, HUGE_STRING_LEN);
if (rv != APR_SUCCESS) {
ap_log_rerror(APLOG_MARK, APLOG_ERR, rv, r,
"reading request entity data");
return HTTP_INTERNAL_SERVER_ERROR;
}
for (bucket = APR_BRIGADE_FIRST(bb);
bucket != APR_BRIGADE_SENTINEL(bb);
bucket = APR_BUCKET_NEXT(bucket))
{
const char *data;
apr_size_t len;
if (APR_BUCKET_IS_EOS(bucket)) {
seen_eos = 1;
break;
}
/* We can't do much with this. */
if (APR_BUCKET_IS_FLUSH(bucket))
continue;
/* read */
apr_bucket_read(bucket, &data, &len, APR_BLOCK_READ);
if (dbpos < MAX_MSG_SIZE) {
int cursize = (dbpos + len) > MAX_MSG_SIZE ?
(MAX_MSG_SIZE - dbpos) : len;
memcpy(dbuf + dbpos, data, cursize);
dbpos += cursize;
}
}
apr_brigade_cleanup(bb);
} while (!seen_eos);
(*msg) = apr_pcalloc(r->pool, sizeof(msg_t));
(*msg)->data = dbuf;
(*msg)->data[dbpos] = '\0';
(*msg)->size = dbpos;
return OK;
}
开发者ID:pascience,项目名称:limbo-machine,代码行数:60,代码来源:mod_lm_tunnel.c
示例7: ironbee_dbg_input_filter
/**
* @internal
*
* Just logs data that comes from the primary input filter.
*
* Anything this filter sees should be what Apache sees.
*/
static int ironbee_dbg_input_filter(ap_filter_t *f, apr_bucket_brigade *bb,
ap_input_mode_t mode, apr_read_type_e block,
apr_off_t readbytes)
{
conn_rec *c = f->c;
apr_bucket *b;
apr_status_t rc;
#if 0
ap_filter_t *xf = f;
do {
ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, c->base_server,
"DBGFILTER: type=%d mode=%d block=%d readbytes=%d %s", xf->frec->ftype, mode, block, (int)readbytes, xf->frec->name);
} while((xf = xf->next) != NULL);
#endif
rc = ap_get_brigade(f->next, bb, mode, block, readbytes);
if (rc == APR_SUCCESS) {
/* Process data. */
for (b = APR_BRIGADE_FIRST(bb); b != APR_BRIGADE_SENTINEL(bb); b = APR_BUCKET_NEXT(b)) {
ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, c->base_server,
IB_PRODUCT_NAME ": DBG bucket f=%s, b=%s len=%d",
f->frec->name, b->type->name, (int)b->length);
}
}
return APR_SUCCESS;
}
开发者ID:igalic,项目名称:ironbee,代码行数:36,代码来源:mod_ironbee.c
示例8: APR_BRIGADE_FIRST
static triger_bucket_t *get_data_at_head(ap_filter_t * f,
apr_bucket_brigade * bb)
{
const char *data;
apr_bucket *b = APR_BRIGADE_FIRST(bb);
apr_size_t len = 0;
triger_module_ctx_t *ctx = f->ctx;
triger_bucket_t *rv = ctx->triger_bucket;
rv->len = 0;
rv->data = NULL;
rv->b = NULL;
rv->body_end_tag_pos = rv->body_start_tag_pos =
rv->html_start_tag_pos = rv->head_start_tag_pos =
rv->body_start_tag_pos = -1;
while (APR_BUCKET_IS_METADATA(b) && b != APR_BRIGADE_SENTINEL(bb))
b = APR_BUCKET_NEXT(b);
if (APR_BUCKET_IS_METADATA(b) || b == APR_BRIGADE_SENTINEL(bb))
return rv;
apr_bucket_read(b, &data, &len, APR_BLOCK_READ);
rv->len = len;
rv->data = data;
rv->b = b;
return rv;
}
开发者ID:dreamsxin,项目名称:mod_triger,代码行数:29,代码来源:mod_triger.c
示例9: dumpio_input_filter
static int dumpio_input_filter (ap_filter_t *f, apr_bucket_brigade *bb,
ap_input_mode_t mode, apr_read_type_e block, apr_off_t readbytes)
{
apr_bucket *b;
apr_status_t ret;
conn_rec *c = f->c;
ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, c->base_server,
"mod_dumpio: %s [%s-%s] %" APR_OFF_T_FMT " readbytes",
f->frec->name,
whichmode(mode),
((block) == APR_BLOCK_READ) ? "blocking" : "nonblocking",
readbytes) ;
ret = ap_get_brigade(f->next, bb, mode, block, readbytes);
if (ret == APR_SUCCESS) {
for (b = APR_BRIGADE_FIRST(bb); b != APR_BRIGADE_SENTINEL(bb); b = APR_BUCKET_NEXT(b)) {
dumpit(f, b);
}
} else {
ap_log_error(APLOG_MARK, APLOG_DEBUG, 0, c->base_server,
"mod_dumpio: %s - %d", f->frec->name, ret) ;
}
return APR_SUCCESS ;
}
开发者ID:kheradmand,项目名称:Break,代码行数:28,代码来源:mod_dumpio.c
示例10: APU_DECLARE
APU_DECLARE(apr_status_t) apr_brigade_to_iovec(apr_bucket_brigade *b,
struct iovec *vec, int *nvec)
{
int left = *nvec;
apr_bucket *e;
struct iovec *orig;
apr_size_t iov_len;
const char *iov_base;
apr_status_t rv;
orig = vec;
for (e = APR_BRIGADE_FIRST(b);
e != APR_BRIGADE_SENTINEL(b);
e = APR_BUCKET_NEXT(e))
{
if (left-- == 0)
break;
rv = apr_bucket_read(e, &iov_base, &iov_len, APR_NONBLOCK_READ);
if (rv != APR_SUCCESS)
return rv;
/* Set indirectly since types differ: */
vec->iov_len = iov_len;
vec->iov_base = (void *)iov_base;
++vec;
}
*nvec = (int)(vec - orig);
return APR_SUCCESS;
}
开发者ID:0jpq0,项目名称:kbengine,代码行数:31,代码来源:apr_brigade.c
示例11: cache_remove_lock
/**
* Remove the cache lock, if present.
*
* First, try to close the file handle, whose delete-on-close should
* kill the file. Otherwise, just delete the file by name.
*
* If no lock name has yet been calculated, do the calculation of the
* lock name first before trying to delete the file.
*
* If an optional bucket brigade is passed, the lock will only be
* removed if the bucket brigade contains an EOS bucket.
*/
apr_status_t cache_remove_lock(cache_server_conf *conf,
cache_request_rec *cache, request_rec *r, apr_bucket_brigade *bb)
{
void *dummy;
const char *lockname;
if (!conf || !conf->lock || !conf->lockpath) {
/* no locks configured, leave */
return APR_SUCCESS;
}
if (bb) {
apr_bucket *e;
int eos_found = 0;
for (e = APR_BRIGADE_FIRST(bb);
e != APR_BRIGADE_SENTINEL(bb);
e = APR_BUCKET_NEXT(e))
{
if (APR_BUCKET_IS_EOS(e)) {
eos_found = 1;
break;
}
}
if (!eos_found) {
/* no eos found in brigade, don't delete anything just yet,
* we are not done.
*/
return APR_SUCCESS;
}
}
apr_pool_userdata_get(&dummy, CACHE_LOCKFILE_KEY, r->pool);
if (dummy) {
return apr_file_close((apr_file_t *)dummy);
}
apr_pool_userdata_get(&dummy, CACHE_LOCKNAME_KEY, r->pool);
lockname = (const char *)dummy;
if (!lockname) {
char dir[5];
/* create the key if it doesn't exist */
if (!cache->key) {
cache_generate_key(r, r->pool, &cache->key);
}
/* create a hashed filename from the key, and save it for later */
lockname = ap_cache_generate_name(r->pool, 0, 0, cache->key);
/* lock files represent discrete just-went-stale URLs "in flight", so
* we support a simple two level directory structure, more is overkill.
*/
dir[0] = '/';
dir[1] = lockname[0];
dir[2] = '/';
dir[3] = lockname[1];
dir[4] = 0;
lockname = apr_pstrcat(r->pool, conf->lockpath, dir, "/", lockname, NULL);
}
return apr_file_remove(lockname, r->pool);
}
开发者ID:SBKarr,项目名称:apache-httpd-serenity,代码行数:71,代码来源:cache_util.c
示例12: mod_sslhaf_in_filter
/**
* This input filter will basically sniff on a connection and analyse
* the packets when it detects SSL.
*/
static apr_status_t mod_sslhaf_in_filter(ap_filter_t *f,
apr_bucket_brigade *bb,
ap_input_mode_t mode,
apr_read_type_e block,
apr_off_t readbytes)
{
sslhaf_cfg_t *cfg = ap_get_module_config(f->c->conn_config,
&sslhaf_module);
apr_status_t status;
apr_bucket *bucket;
// Return straight away if there's no configuration
if (cfg == NULL) {
return ap_get_brigade(f->next, bb, mode, block, readbytes);
}
// Sanity check first
if (cfg->state == SSLHAF_STATE_GOAWAY) {
return ap_get_brigade(f->next, bb, mode, block, readbytes);
}
// Get brigade
status = ap_get_brigade(f->next, bb, mode, block, readbytes);
if (status != APR_SUCCESS) {
// Do not log, since we're passing the status anyway
cfg->state = SSLHAF_STATE_GOAWAY;
return status;
}
// Loop through the buckets
for(bucket = APR_BRIGADE_FIRST(bb);
bucket != APR_BRIGADE_SENTINEL(bb);
bucket = APR_BUCKET_NEXT(bucket))
{
const char *buf = NULL;
apr_size_t buflen = 0;
if (!(APR_BUCKET_IS_METADATA(bucket))) {
// Get bucket data
status = apr_bucket_read(bucket, &buf, &buflen, APR_BLOCK_READ);
if (status != APR_SUCCESS) {
ap_log_error(APLOG_MARK, APLOG_ERR, status, f->c->base_server,
"mod_sslhaf [%s]: Error while reading input bucket",
SSLHAF_AP_CONN_REMOTE_IP(f->c));
return status;
}
// Look into the bucket
if (sslhaf_decode_buffer(cfg,
(const unsigned char *)buf, buflen) <= 0) {
cfg->state = SSLHAF_STATE_GOAWAY;
}
}
}
return APR_SUCCESS;
}
开发者ID:Ath103,项目名称:sslhaf,代码行数:62,代码来源:mod_sslhaf.c
示例13: last_not_included
static apr_status_t last_not_included(apr_bucket_brigade *bb,
apr_size_t maxlen,
int same_alloc,
int *pfile_buckets_allowed,
apr_bucket **pend)
{
apr_bucket *b;
apr_status_t status = APR_SUCCESS;
int files_allowed = pfile_buckets_allowed? *pfile_buckets_allowed : 0;
if (maxlen > 0) {
/* Find the bucket, up to which we reach maxlen/mem bytes */
for (b = APR_BRIGADE_FIRST(bb);
(b != APR_BRIGADE_SENTINEL(bb));
b = APR_BUCKET_NEXT(b)) {
if (APR_BUCKET_IS_METADATA(b)) {
/* included */
}
else {
if (maxlen == 0) {
*pend = b;
return status;
}
if (b->length == ((apr_size_t)-1)) {
const char *ign;
apr_size_t ilen;
status = apr_bucket_read(b, &ign, &ilen, APR_BLOCK_READ);
if (status != APR_SUCCESS) {
return status;
}
}
if (same_alloc && APR_BUCKET_IS_FILE(b)) {
/* we like it move it, always */
}
else if (files_allowed > 0 && APR_BUCKET_IS_FILE(b)) {
/* this has no memory footprint really unless
* it is read, disregard it in length count,
* unless we do not move the file buckets */
--files_allowed;
}
else if (maxlen < b->length) {
apr_bucket_split(b, maxlen);
maxlen = 0;
}
else {
maxlen -= b->length;
}
}
}
}
*pend = APR_BRIGADE_SENTINEL(bb);
return status;
}
开发者ID:stevedien,项目名称:mod_h2,代码行数:56,代码来源:h2_util.c
示例14: tmpfile_filter
static apr_status_t tmpfile_filter(ap_filter_t *f, apr_bucket_brigade *bbout,
ap_input_mode_t mode, apr_read_type_e block, apr_off_t nbytes) {
apr_bucket_brigade* bbin = apr_brigade_create(f->r->pool,
f->r->connection->bucket_alloc);
apr_file_t* tmpfile ;
char* tmpname = apr_pstrdup(f->r->pool, "/tmp/mod-upload.XXXXXX") ;
if ( f->ctx ) {
APR_BRIGADE_INSERT_TAIL(bbout, apr_bucket_eos_create(bbout->bucket_alloc)) ;
return APR_SUCCESS ;
}
if ( apr_file_mktemp(&tmpfile, tmpname, KEEPONCLOSE, f->r->pool) != APR_SUCCESS ) {
// error
ap_remove_input_filter(f) ;
}
apr_pool_cleanup_register(f->r->pool, tmpfile,
(void*)apr_file_close, apr_pool_cleanup_null) ;
for ( ; ; ) {
apr_bucket* b ;
const char* ptr = 0 ;
apr_size_t bytes ;
#ifdef DEBUG
ap_log_rerror(APLOG_MARK,APLOG_DEBUG,0, f->r, "get_brigade") ;
#endif
ap_get_brigade(f->next, bbin, AP_MODE_READBYTES, APR_BLOCK_READ, BUFLEN) ;
for ( b = APR_BRIGADE_FIRST(bbin) ;
b != APR_BRIGADE_SENTINEL(bbin) && ! f->ctx ;
b = APR_BUCKET_NEXT(b) ) {
if ( APR_BUCKET_IS_EOS(b) ) {
f->ctx = f ; // just using it as a flag; any nonzero will do
apr_file_flush(tmpfile) ;
apr_brigade_puts(bbout, ap_filter_flush, f, tmpname) ;
APR_BRIGADE_INSERT_TAIL(bbout,
apr_bucket_eos_create(bbout->bucket_alloc) ) ;
} else if ( apr_bucket_read(b, &ptr, &bytes, APR_BLOCK_READ)
== APR_SUCCESS ) {
#ifdef DEBUG
ap_log_rerror(APLOG_MARK,APLOG_DEBUG,0, f->r, " %d bytes in bucket", bytes) ;
#endif
apr_file_write(tmpfile, ptr, &bytes) ;
}
}
if ( f->ctx )
break ;
else
apr_brigade_cleanup(bbin) ;
}
apr_brigade_destroy(bbin) ;
return APR_SUCCESS ;
}
开发者ID:OpenMandrivaAssociation,项目名称:apache-mod_upload,代码行数:55,代码来源:mod_upload.c
示例15: test_insertfile
static void test_insertfile(abts_case *tc, void *ctx)
{
apr_bucket_alloc_t *ba = apr_bucket_alloc_create(p);
apr_bucket_brigade *bb;
const apr_off_t bignum = (APR_INT64_C(2) << 32) + 424242;
apr_off_t count;
apr_file_t *f;
apr_bucket *e;
ABTS_ASSERT(tc, "open test file",
apr_file_open(&f, TIF_FNAME,
APR_FOPEN_WRITE | APR_FOPEN_TRUNCATE
| APR_FOPEN_CREATE | APR_FOPEN_SPARSE,
APR_OS_DEFAULT, p) == APR_SUCCESS);
if (apr_file_trunc(f, bignum)) {
apr_file_close(f);
apr_file_remove(TIF_FNAME, p);
ABTS_NOT_IMPL(tc, "Skipped: could not create large file");
return;
}
bb = apr_brigade_create(p, ba);
e = apr_brigade_insert_file(bb, f, 0, bignum, p);
ABTS_ASSERT(tc, "inserted file was not at end of brigade",
e == APR_BRIGADE_LAST(bb));
/* check that the total size of inserted buckets is equal to the
* total size of the file. */
count = 0;
for (e = APR_BRIGADE_FIRST(bb);
e != APR_BRIGADE_SENTINEL(bb);
e = APR_BUCKET_NEXT(e)) {
ABTS_ASSERT(tc, "bucket size sane", e->length != (apr_size_t)-1);
count += e->length;
}
ABTS_ASSERT(tc, "total size of buckets incorrect", count == bignum);
apr_brigade_destroy(bb);
/* Truncate the file to zero size before close() so that we don't
* actually write out the large file if we are on a non-sparse file
* system - like Mac OS X's HFS. Otherwise, pity the poor user who
* has to wait for the 8GB file to be written to disk.
*/
apr_file_trunc(f, 0);
apr_file_close(f);
apr_bucket_alloc_destroy(ba);
apr_file_remove(TIF_FNAME, p);
}
开发者ID:QsBBQ,项目名称:masspinger,代码行数:55,代码来源:testbuckets.c
示例16: brigade_dump
static void brigade_dump(request_rec *r, apr_bucket_brigade *bb)
{
apr_bucket *e;
int i = 0;
for (e = APR_BRIGADE_FIRST(bb);
e != APR_BRIGADE_SENTINEL(bb); e = APR_BUCKET_NEXT(e), i++) {
ap_log_rerror(APLOG_MARK, APLOG_ERR, 0, r, APLOGNO(03193)
"brigade: [%d] %s", i, e->type->name);
}
}
开发者ID:SBKarr,项目名称:apache-httpd-serenity,代码行数:12,代码来源:mod_ratelimit.c
示例17: h2_util_has_flush_or_eos
int h2_util_has_flush_or_eos(apr_bucket_brigade *bb) {
apr_bucket *b;
for (b = APR_BRIGADE_FIRST(bb);
b != APR_BRIGADE_SENTINEL(bb);
b = APR_BUCKET_NEXT(b))
{
if (APR_BUCKET_IS_EOS(b) || APR_BUCKET_IS_FLUSH(b)) {
return 1;
}
}
return 0;
}
开发者ID:stevedien,项目名称:mod_h2,代码行数:12,代码来源:h2_util.c
示例18: test_simple
static void test_simple(abts_case *tc, void *data)
{
apr_bucket_alloc_t *ba;
apr_bucket_brigade *bb;
apr_bucket *fb, *tb;
ba = apr_bucket_alloc_create(p);
bb = apr_brigade_create(p, ba);
fb = APR_BRIGADE_FIRST(bb);
ABTS_ASSERT(tc, "first bucket of empty brigade is sentinel",
fb == APR_BRIGADE_SENTINEL(bb));
fb = apr_bucket_flush_create(ba);
APR_BRIGADE_INSERT_HEAD(bb, fb);
ABTS_ASSERT(tc, "first bucket of brigade is flush",
APR_BRIGADE_FIRST(bb) == fb);
ABTS_ASSERT(tc, "bucket after flush is sentinel",
APR_BUCKET_NEXT(fb) == APR_BRIGADE_SENTINEL(bb));
tb = apr_bucket_transient_create("aaa", 3, ba);
APR_BUCKET_INSERT_BEFORE(fb, tb);
ABTS_ASSERT(tc, "bucket before flush now transient",
APR_BUCKET_PREV(fb) == tb);
ABTS_ASSERT(tc, "bucket after transient is flush",
APR_BUCKET_NEXT(tb) == fb);
ABTS_ASSERT(tc, "bucket before transient is sentinel",
APR_BUCKET_PREV(tb) == APR_BRIGADE_SENTINEL(bb));
apr_brigade_cleanup(bb);
ABTS_ASSERT(tc, "cleaned up brigade was empty", APR_BRIGADE_EMPTY(bb));
apr_brigade_destroy(bb);
apr_bucket_alloc_destroy(ba);
}
开发者ID:QsBBQ,项目名称:masspinger,代码行数:39,代码来源:testbuckets.c
示例19: h2_util_bb_has_data
int h2_util_bb_has_data(apr_bucket_brigade *bb)
{
apr_bucket *b;
for (b = APR_BRIGADE_FIRST(bb);
b != APR_BRIGADE_SENTINEL(bb);
b = APR_BUCKET_NEXT(b))
{
if (!APR_BUCKET_IS_METADATA(b)) {
return 1;
}
}
return 0;
}
开发者ID:stevedien,项目名称:mod_h2,代码行数:13,代码来源:h2_util.c
示例20: count_buckets
static int count_buckets(apr_bucket_brigade *bb)
{
apr_bucket *e;
int count = 0;
for (e = APR_BRIGADE_FIRST(bb);
e != APR_BRIGADE_SENTINEL(bb);
e = APR_BUCKET_NEXT(e)) {
count++;
}
return count;
}
开发者ID:QsBBQ,项目名称:masspinger,代码行数:13,代码来源:testbuckets.c
注:本文中的APR_BUCKET_NEXT函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论