C++ AR_DEBUG_ASSERT函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中AR_DEBUG_ASSERT函数的典型用法代码示例。如果您正苦于以下问题：C++ AR_DEBUG_ASSERT函数的具体用法？C++ AR_DEBUG_ASSERT怎么用？C++ AR_DEBUG_ASSERT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了AR_DEBUG_ASSERT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: HIFInit

A_STATUS HIFInit(OSDRV_CALLBACKS *callbacks)
{
	SD_API_STATUS sdStatus;
	
    AR_DEBUG_ASSERT(callbacks != NULL);

    /* store the callback handlers */
    osdrvCallbacks = *callbacks;

    /* Register with bus driver core */
    NDIS_DEBUG_PRINTF(DBG_LEVEL_HIF, "AR6000: HIFInit registering \r\n");
    registered = 1;
#if defined(CONFIG_PM)
	// TODO about power management.
#endif /* CONFIG_PM */

    /* Register with bus driver core */
    sdFunction.pName      = "sdio_wlan";
    sdFunction.pProbe     = hifDeviceInserted;
    sdFunction.pRemove    = hifDeviceRemoved;

	
	A_MUTEX_INIT(&hif_lock);
	NdisAllocateSpinLock(&sLock);
	
    sdStatus = SDIORegisterFunction(&sdFunction);
    AR_DEBUG_ASSERT(SD_API_SUCCESS(sdStatus));	
    
    return A_OK;
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:30，代码来源:hif.c

示例2: _WRITE_WINDOW_ADDR

/*
 * Commit an address to either WINDOW_WRITE_ADDR_REG or to
 * WINDOW_READ_ADDR_REG.  We write the least significan byte (LSB)
 * last, since it triggers the read/write.
 */
static void
_WRITE_WINDOW_ADDR(HTC_TARGET *target, A_UINT32 whichreg, A_UINT32 value)
{
    A_UINT32 window_addr;
    HIF_REQUEST request;
    A_STATUS status;
    A_UINT32 address;

    window_addr = value;
    HIF_FRAME_REQUEST(&request, HIF_WRITE, HIF_EXTENDED_IO, HIF_SYNCHRONOUS,
                      HIF_BYTE_BASIS, HIF_INCREMENTAL_ADDRESS);

    address = getRegAddr(whichreg, ENDPOINT_UNUSED);
#ifdef ONLY_16BIT
    status = HIFReadWrite(target->device, address+2, 
                          (A_UCHAR *)&window_addr+2, 2, &request, NULL);
    AR_DEBUG_ASSERT(status == A_OK);

    status = HIFReadWrite(target->device, address, 
                          (A_UCHAR *)&window_addr, 2, &request, NULL);
    status = HIFReadWrite(target->device, address, 
                          (A_UCHAR *)&window_addr, 2, &request, NULL);
    AR_DEBUG_ASSERT(status == A_OK);
#else
    status = HIFReadWrite(target->device, address+1, 
                          (A_UCHAR *)&window_addr+1, 3, &request, NULL);
    AR_DEBUG_ASSERT(status == A_OK);

    status = HIFReadWrite(target->device, address, 
                          (A_UCHAR *)&window_addr, 1, &request, NULL);
    AR_DEBUG_ASSERT(status == A_OK);
#endif
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:38，代码来源:htc.c

示例3: hifDeviceRemoved

static void hifDeviceRemoved(struct sdio_func *func)
{
    A_STATUS status = A_OK;
    HIF_DEVICE *device;
    int ret;
    AR_DEBUG_ASSERT(func != NULL);

    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +hifDeviceRemoved\n"));
    device = getHifDevice(func);
    if (device->claimedContext != NULL) {
        status = osdrvCallbacks.deviceRemovedHandler(device->claimedContext, device);
    }
    do {
        if (device->is_suspend) {
            device->is_suspend = FALSE;
            break;
        }
        if (!IS_ERR(device->async_task)) {
            init_completion(&device->async_completion);
            device->async_shutdown = 1;
            up(&device->sem_async);
            wait_for_completion(&device->async_completion);
            device->async_task = NULL;
        }
        /* Disable the card */
        sdio_claim_host(device->func);
        ret = sdio_disable_func(device->func);
        sdio_release_host(device->func);
    } while (0);
    delHifDevice(device);
    AR_DEBUG_ASSERT(status == A_OK);
    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -hifDeviceRemoved\n"));
}

开发者ID:plaguedbypenguins，项目名称:atheros_sdk2，代码行数:33，代码来源:hif.c

示例4: HIFInit

/* ------ Functions ------ */
A_STATUS HIFInit(OSDRV_CALLBACKS *callbacks)
{
    int status;
    AR_DEBUG_ASSERT(callbacks != NULL);

    A_REGISTER_MODULE_DEBUG_INFO(hif);

    /* store the callback handlers */
    osdrvCallbacks = *callbacks;

    /* Register with bus driver core */
    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFInit registering\n"));
    registered = 1;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) && defined(CONFIG_PM)
    if (callbacks->deviceSuspendHandler && callbacks->deviceResumeHandler) {
        ar6k_driver.drv.pm = &ar6k_device_pm_ops;
    }
#endif /* CONFIG_PM */
    status = sdio_register_driver(&ar6k_driver);
    AR_DEBUG_ASSERT(status==0);

    if (status != 0) {
        return A_ERROR;
    }

    return A_OK;

}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:29，代码来源:hif.c

示例5: hifDeviceRemoved

static void hifDeviceRemoved(struct sdio_func *func)
{
    A_STATUS status = A_OK;
    HIF_DEVICE *device;
    AR_DEBUG_ASSERT(func != NULL);

    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: +hifDeviceRemoved\n"));
    device = getHifDevice(func);
    if (device->claimedContext != NULL) {
        status = osdrvCallbacks.deviceRemovedHandler(device->claimedContext, device);
    }

    if (device->is_suspend) {
        device->is_suspend = FALSE;
    } else {
        if (hifDisableFunc(device, func)!=0) {
            status = A_ERROR;
        }
    }
    CleanupHIFScatterResources(device);
     
    delHifDevice(device);
    AR_DEBUG_ASSERT(status == A_OK);
    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: -hifDeviceRemoved\n"));
}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:25，代码来源:hif.c

示例6: HIFShutDownDevice

void
HIFShutDownDevice(HIF_DEVICE *device)
{
    SD_API_STATUS sdStatus;
    //SDCONFIG_BUS_MODE_DATA busSettings;
	UCHAR         buffer;

	if (device == NULL) {
		HIF_DEBUG_PRINTF(ATH_LOG_ERR, "Invalid Handle passed\n");
		return;
	}
    /* Remove the allocated current if any */
	/*
	 * There is no equivalent for this one in WINCE
    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_FREE_SLOT_CURRENT, 
                               NULL, 0);
    DBG_ASSERT(SDIO_SUCCESS(status));
	*/

    /* Disable the card */
	SDIODisconnectInterrupt(device->handle);
    sdStatus = SDSetCardFeature(device->handle, SD_IO_FUNCTION_DISABLE,
			                      NULL, 0);
    AR_DEBUG_ASSERT(SD_API_SUCCESS(sdStatus));

    /* Perform a soft I/O reset */
	sdStatus = SDReadWriteRegistersDirect(device->handle, SD_IO_WRITE, 0, 
					SD_IO_REG_IO_ABORT, 1, &buffer, 0);
    AR_DEBUG_ASSERT(SD_API_SUCCESS(sdStatus));

    /* 
     * WAR - Codetelligence driver does not seem to shutdown correctly in 1
     * bit mode. By default it configures the HC in the 4 bit. Its later in
     * our driver that we switch to 1 bit mode. If we try to shutdown, the
     * driver hangs so we revert to 4 bit mode, to be transparent to the 
     * underlying bus driver.
     */
	/*
	 * Not sure whether this is required for WINCE hence commenting
	 */
	/*
    if (sdio1bitmode) {
        ZERO_OBJECT(busSettings);
        busSettings.BusModeFlags = device->handle->pHcd->CardProperties.BusMode;
        SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags, 
                               SDCONFIG_BUS_WIDTH_4_BIT);

        // Issue config request to change the bus width to 4 bit
        status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL,
                                   &busSettings, 
                                   sizeof(SDCONFIG_BUS_MODE_DATA));
        DBG_ASSERT(SDIO_SUCCESS(status));
    }
	*/

    /* Unregister with bus driver core */
    sdStatus = SDIOUnregisterFunction(&sdFunction);
    AR_DEBUG_ASSERT(SD_API_SUCCESS(sdStatus));
	return;
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:60，代码来源:hif.c

示例7: htcServiceCPUInterrupt

void
htcServiceCPUInterrupt(HTC_TARGET *target)
{
    A_STATUS status;
    A_UINT32 address;
    HIF_REQUEST request;
    A_UINT8 cpu_int_status;

    HTC_DEBUG_PRINTF(ATH_LOG_INF, "CPU Interrupt\n");
    cpu_int_status = target->table.cpu_int_status &
                     target->table.cpu_int_status_enable;
    AR_DEBUG_ASSERT(cpu_int_status);
    HTC_DEBUG_PRINTF(ATH_LOG_INF, 
                    "Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
                    cpu_int_status);

    /* Figure out the interrupt number */
    HTC_DEBUG_PRINTF(ATH_LOG_INF, "Interrupt Number: 0x%x\n", 
                    htcGetBitNumSet(cpu_int_status));

    /* Clear the interrupt */
    target->table.cpu_int_status = cpu_int_status; /* W1C */
    HIF_FRAME_REQUEST(&request, HIF_WRITE, HIF_EXTENDED_IO, HIF_SYNCHRONOUS, 
                      HIF_BYTE_BASIS, HIF_FIXED_ADDRESS);
    address = getRegAddr(CPU_INT_STATUS_REG, ENDPOINT_UNUSED);
    status = HIFReadWrite(target->device, address, 
                          &target->table.cpu_int_status, 1, &request, NULL);

    AR_DEBUG_ASSERT(status == A_OK);
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:30，代码来源:htc_events.c

示例8: hifIRQHandler

SD_API_STATUS 
hifIRQHandler(SD_DEVICE_HANDLE hDevice, PVOID notUsed)
{
#ifndef CEPC
	A_STATUS         status;
    HIF_DEVICE      *device;
	A_BOOL			 callDSR;
#endif

    HIF_DEBUG_PRINTF(ATH_LOG_TRC, "hifIRQHandler : Enter\n");

#ifndef CEPC
	/* Disable device interrupts */
	device = getHifDevice(hDevice);

	status = htcCallbacks.deviceInterruptDisabler(device, &callDSR);
	AR_DEBUG_ASSERT(status == A_OK);

	/* Call the DSR Handler if it is not a Spurious Interrupt */
	if (callDSR) {
		status = htcCallbacks.dsrHandler(device);
		AR_DEBUG_ASSERT(status == A_OK);
	}
#else
	NdisSetEvent(&hifIRQEvent);
#endif
	HIF_DEBUG_PRINTF(ATH_LOG_TRC, "hifIRQHandler : Exit\n");
	return SD_API_STATUS_SUCCESS;
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:29，代码来源:hif.c

示例9: CF_BusRequest_16

static A_STATUS 
CF_BusRequest_16(CF_DEVICE_HANDLE cfHandle, CF_REQUEST *pReq)
{
    volatile A_UINT16     *data, *base;
    A_UINT32     len, i;
    CF_DEVICE    *device;

    device = (CF_DEVICE *)cfHandle;

    if (device == NULL || pReq == NULL) {
        return A_ERROR;
    }

    HIF_DEBUG_PRINTF(ATH_LOG_TRC,"CF_BusRequest_16 \n");

    data = (A_UINT16 *)pReq->pDataBuffer;
    base = (A_UINT16 *)(device->mappedMemBase + pReq->address);
    len = pReq->length;

    /*
     * Assert on odd address and odd length 
     */
    
    AR_DEBUG_ASSERT(!(((A_UINT32)data)%2));
    AR_DEBUG_ASSERT(!(((A_UINT32)base)%2));
    AR_DEBUG_ASSERT(!(len%2));
    
    len = len/2;

    if (pReq->flags & CFREQ_FLAGS_DATA_WRITE) {
        if (pReq->flags & CFREQ_FLAGS_FIXED_ADDRESS) {
            for (i = 0; i < len; i++) {
                *base = *data;
                data++;
            }
        }  else {
            for (i = 0; i < len; i++) {
                *base = *data;
                base++;
                data++;
            }
        }

    } else {
        if (pReq->flags & CFREQ_FLAGS_FIXED_ADDRESS) {
            for (i = 0; i < len; i++) {
                *data = *base;
                data++;
            }
        } else {
            for (i = 0; i < len; i++) {
                *data = *base;
                base++;
                data++;
            }
        }
    }
    return A_OK;
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:59，代码来源:ar6000_cf.c

示例10: htcInterruptEnabler

A_STATUS htcInterruptEnabler(HIF_DEVICE *device) {

	A_STATUS status;
    A_UINT32 address;
    HIF_REQUEST request;
	HTC_TARGET *target;
	HTC_REG_REQUEST_ELEMENT *element;

    target = getTargetInstance(device);
    AR_DEBUG_ASSERT(target != NULL);
    HTC_DEBUG_PRINTF(ATH_LOG_TRC, 
                    "htcInterruptEnabler Enter target: 0x%p\n", target);

	target->table.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
                                      INT_STATUS_ENABLE_CPU_SET(0x01) |
                                      INT_STATUS_ENABLE_COUNTER_SET(0x01) |
                                      INT_STATUS_ENABLE_MBOX_DATA_SET(0x0F);
	/* Reenable Dragon Interrupts */
	element = allocateRegRequestElement(target);
    AR_DEBUG_ASSERT(element != NULL);
#ifdef ONLY_16BIT
    FILL_REG_BUFFER(element, (A_UINT16 *)&target->table.int_status_enable, 2, 
                    INT_STATUS_ENABLE_REG, ENDPOINT_UNUSED);
#else
    FILL_REG_BUFFER(element, &target->table.int_status_enable, 1, 
                    INT_STATUS_ENABLE_REG, ENDPOINT_UNUSED);
#endif

	HIF_FRAME_REQUEST(&request, HIF_WRITE, HIF_EXTENDED_IO, HIF_ASYNCHRONOUS, 
                      HIF_BYTE_BASIS, HIF_FIXED_ADDRESS);
    address = getRegAddr(INT_STATUS_ENABLE_REG, ENDPOINT_UNUSED);
#ifdef ONLY_16BIT
    status = HIFReadWrite(target->device, address, 
                          &target->table.int_status_enable, 2, 
                          &request, element);
#else
    status = HIFReadWrite(target->device, address, 
                          &target->table.int_status_enable, 1, 
                          &request, element);
#endif

#ifndef HTC_SYNC
	AR_DEBUG_ASSERT(status == A_OK);
#else
	AR_DEBUG_ASSERT(status == A_OK || status == A_PENDING);
	if ( status == A_OK ) {
		element->completionCB(element, status);
	}
#endif //HTC_SYNC


    HTC_DEBUG_PRINTF(ATH_LOG_TRC,"htcInterruptEnabler Exit\n");

	return A_OK;
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:55，代码来源:htc_events.c

示例11: HIFMaskInterrupt

void HIFMaskInterrupt(HIF_DEVICE *device)
{
    SDIO_STATUS status;
    AR_DEBUG_ASSERT(device != NULL);
    AR_DEBUG_ASSERT(device->handle != NULL);

    /* Mask our function IRQ */
    status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ, 
                               NULL, 0);
    AR_DEBUG_ASSERT(SDIO_SUCCESS(status));

}

开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:12，代码来源:hif.c

示例12: htcInterruptPending

A_STATUS
htcInterruptPending(HIF_DEVICE *device, A_BOOL *intPending)
{
    A_STATUS status;
    A_UINT32 address;
    HTC_TARGET *target;
    HIF_REQUEST request;
    A_UCHAR      intStatus[2] = {0,0};
    A_UCHAR      intMask[2] = {0,0};

    target = getTargetInstance(device);
    AR_DEBUG_ASSERT(target != NULL);
    HTC_DEBUG_PRINTF(ATH_LOG_TRC, 
                    "htcInterruptPending Enter target: 0x%p\n", target);

    // get the current interrupt status register
    HIF_FRAME_REQUEST(&request, HIF_READ, HIF_EXTENDED_IO, HIF_SYNCHRONOUS,
                      HIF_BYTE_BASIS, HIF_FIXED_ADDRESS);
    address = getRegAddr(INT_STATUS_REG, ENDPOINT_UNUSED);

#ifdef ONLY_16BIT
    status = HIFReadWrite(target->device, address, 
                          intStatus, 2, &request, NULL);
#else
    status = HIFReadWrite(target->device, address, 
                          intStatus, 1, &request, NULL);
#endif
    AR_DEBUG_ASSERT(status == A_OK);

    // get the interrupt enable register value 
    HIF_FRAME_REQUEST(&request, HIF_READ, HIF_EXTENDED_IO, HIF_SYNCHRONOUS,
                      HIF_BYTE_BASIS, HIF_FIXED_ADDRESS);

    address = getRegAddr(INT_STATUS_ENABLE_REG, ENDPOINT_UNUSED);

#ifdef ONLY_16BIT
    status = HIFReadWrite(target->device, address, 
                          intMask, 2, &request, NULL);
#else
    status = HIFReadWrite(target->device, address, 
                          intMask, 1, &request, NULL);
#endif
    AR_DEBUG_ASSERT(status == A_OK);
    if (!((intMask[0] & intStatus[0]) == 0)) {
	    *intPending = TRUE;
    } else {
	    *intPending = FALSE;
    }
    return A_OK;
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:50，代码来源:htc_events.c

示例13: HIFMaskInterrupt

void HIFMaskInterrupt(HIF_DEVICE *device)
{
    int ret;;

    AR_DEBUG_ASSERT(device != NULL);
    AR_DEBUG_ASSERT(device->func != NULL);

    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFMaskInterrupt\n"));

    /* Mask our function IRQ */
    sdio_claim_host(device->func);
    ret = sdio_release_irq(device->func);
    sdio_release_host(device->func);
    AR_DEBUG_ASSERT(ret == 0);
}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:15，代码来源:hif.c

示例14: hifRWCompletionHandler

void 
hifRWCompletionHandler(SDREQUEST *request) 
{
    void *context;
    A_STATUS status = A_OK;
    HIF_DEVICE *device;
    BUS_REQUEST *busrequest;

    busrequest = (BUS_REQUEST *)request->pCompleteContext;
    AR_DEBUG_ASSERT(busrequest->request == request);
    device = busrequest->device;
    context = busrequest->context;
    if (!SDIO_SUCCESS(request->Status)) {
        status = A_ERROR;    
    }
    
        /* free the request, we have all the info we need */
    hifFreeBusRequest(device,busrequest);
    busrequest = NULL;
    
    if (device->shutdownInProgress) {
        device->htcCallbacks.rwCompletionHandler(context, A_ERROR);
        return;
    }
    
    device->htcCallbacks.rwCompletionHandler(context, status);
}

开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:27，代码来源:hif.c

示例15: sort_barcodes

/**
 * Returns a lexicographically sorted list of merged barcodes, each paired with
 * the 0-based index of corresponding barcode in the source vector.
 */
barcode_vec sort_barcodes(const fastq_pair_vec& barcodes)
{
    AR_DEBUG_ASSERT(!barcodes.empty());
    barcode_vec sorted_barcodes;

    const size_t max_key_1_len = barcodes.front().first.length();
    const size_t max_key_2_len = barcodes.front().second.length();
    for (auto it = barcodes.begin(); it != barcodes.end(); ++it) {
        if (it->first.length() != max_key_1_len) {
            throw barcode_error("mate 1 barcodes do not have the same length");
        } else if (it->second.length() != max_key_2_len) {
            throw barcode_error("mate 2 barcodes do not have the same length");
        }

        std::string barcode;
        barcode.reserve(max_key_1_len + max_key_2_len);
        barcode.append(it->first.sequence());
        barcode.append(it->second.sequence());

        sorted_barcodes.push_back(barcode_pair(barcode, it - barcodes.begin()));
    }

    std::sort(sorted_barcodes.begin(), sorted_barcodes.end());

    return sorted_barcodes;
}

开发者ID:MikkelSchubert，项目名称:adapterremoval，代码行数:30，代码来源:barcode_table.cpp

示例16: hifIRQThread

DWORD
hifIRQThread(void *Context)
{

	A_STATUS         status = A_OK;
	HIF_DEVICE      *device;

	device = (HIF_DEVICE *)Context;

	NDIS_DEBUG_PRINTF(DBG_LEVEL_HIF, " %s() is Running... \r\n",__FUNCTION__);


	while (TRUE) 
	{
		NdisWaitEvent(&hifIRQEvent, 0);
		NdisResetEvent(&hifIRQEvent);
		
		NDIS_DEBUG_PRINTF(DBG_TRACE, "%s() - Running  & ",__FUNCTION__);
		status = device->htcCallbacks.dsrHandler(device->htcCallbacks.context);
		AR_DEBUG_ASSERT(status == A_OK);
		NDIS_DEBUG_PRINTF(DBG_TRACE, " Exit \r\n");
		
		SDIOConnectInterrupt(device->handle,hifIRQHandler);
				
	} // while
	return SD_API_STATUS_SUCCESS;
	
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:28，代码来源:hif.c

示例17: HIFRegisterCallbacks

void
HIFRegisterCallbacks(HTC_CALLBACKS *callbacks)
{
    A_STATUS    status;
    
    /* Store the callback and event handlers */
    htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler;
    htcCallbacks.deviceRemovedHandler  = callbacks->deviceRemovedHandler;
    htcCallbacks.deviceSuspendHandler  = callbacks->deviceSuspendHandler;
    htcCallbacks.deviceResumeHandler   = callbacks->deviceResumeHandler;
    htcCallbacks.deviceWakeupHandler   = callbacks->deviceWakeupHandler;
    htcCallbacks.rwCompletionHandler   = callbacks->rwCompletionHandler;
    htcCallbacks.deviceInterruptDisabler = callbacks->deviceInterruptDisabler;
    htcCallbacks.deviceInterruptEnabler = callbacks->deviceInterruptEnabler;
    htcCallbacks.dsrHandler            = callbacks->dsrHandler;

    /* Register the callback handlers with the lower driver */
    cfFunction.pName      = "cf_wlan";
    cfFunction.pProbe     = hifDeviceInserted;
    cfFunction.pRemove    = hifDeviceRemoved;
    cfFunction.pIsr       = hifISRHandler;
    cfFunction.pDsr       = hifDSRHandler;

    status = CF_RegisterFunction(&cfFunction);

    AR_DEBUG_ASSERT(status == A_OK);
}

开发者ID:NemProjects，项目名称:WLAN，代码行数:27，代码来源:hif.c

示例18: HTCControlRecv

    /* callback when a control message arrives on this endpoint */
void HTCControlRecv(void *Context, HTC_PACKET *pPacket)
{
    AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0);

    if (pPacket->Status == A_ECANCELED) {
        /* this is a flush operation, return the control packet back to the pool */
        HTC_FREE_CONTROL_RX((HTC_TARGET*)Context,pPacket);    
        return;
    }  
    
        /* the only control messages we are expecting are NULL messages (credit resports) */   
    if (pPacket->ActualLength > 0) {
        AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
                        ("HTCControlRecv, got message with length:%d \n",
                        pPacket->ActualLength + (A_UINT32)HTC_HDR_LENGTH));

#ifdef ATH_DEBUG_MODULE
            /* dump header and message */
        DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH,
                       pPacket->ActualLength + HTC_HDR_LENGTH,
                       "Unexpected ENDPOINT 0 Message");
#endif
    }

    HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket,&((HTC_TARGET*)Context)->EndPoint[0]);
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:27，代码来源:htc_services.c

示例19: HIFUnMaskInterrupt

void
HIFUnMaskInterrupt(HIF_DEVICE *device)
{
    int ret;;

    AR_DEBUG_ASSERT(device != NULL);
    AR_DEBUG_ASSERT(device->func != NULL);

    AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFUnMaskInterrupt\n"));

    /* Register the IRQ Handler */
    sdio_claim_host(device->func);
    ret = sdio_claim_irq(device->func, hifIRQHandler);
    sdio_release_host(device->func);
    AR_DEBUG_ASSERT(ret == 0);
}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:16，代码来源:hif.c

示例20: HIFAckInterrupt

void
HIFAckInterrupt(HIF_DEVICE *device)
{
    AR_DEBUG_ASSERT(device != NULL);

    /* Acknowledge our function IRQ */
}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:7，代码来源:hif.c

注：本文中的AR_DEBUG_ASSERT函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ AR_DEBUG_PRINTF函数代码示例发布时间：2022-05-30

C++ ARX_UNUSED函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18445|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9756|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8232|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8593|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8505|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9471|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8487|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7912|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8470|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7437|2022-11-06

客服电话

电子邮件

C++ AR_DEBUG_ASSERT函数代码示例

示例1: HIFInit

示例2: _WRITE_WINDOW_ADDR

示例3: hifDeviceRemoved

示例4: HIFInit

示例5: hifDeviceRemoved

示例6: HIFShutDownDevice

示例7: htcServiceCPUInterrupt

示例8: hifIRQHandler

示例9: CF_BusRequest_16

示例10: htcInterruptEnabler

示例11: HIFMaskInterrupt

示例12: htcInterruptPending

示例13: HIFMaskInterrupt

示例14: hifRWCompletionHandler

示例15: sort_barcodes

示例16: hifIRQThread

示例17: HIFRegisterCallbacks

示例18: HTCControlRecv

示例19: HIFUnMaskInterrupt

示例20: HIFAckInterrupt

请发表评论

全部评论

上一篇：

下一篇：

dustinvtran/ml-videos: A collection of v

[Go]GO语言实战-小程序或公众号接口gin框架

delphi线程使用

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053