本文整理汇总了C++中ASSERT_ALWAYS函数的典型用法代码示例。如果您正苦于以下问题：C++ ASSERT_ALWAYS函数的具体用法？C++ ASSERT_ALWAYS怎么用？C++ ASSERT_ALWAYS使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ASSERT_ALWAYS函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: check_inf_nan
static void
check_inf_nan (void)
{
/* only if nans and infs are available */
#if _GMP_IEEE_FLOATS && !defined(MPFR_ERRDIVZERO)
mpfr_t x;
double d;
mpfr_init2 (x, 123);
mpfr_set_inf (x, 1);
d = mpfr_get_d (x, MPFR_RNDZ);
ASSERT_ALWAYS (d > 0);
ASSERT_ALWAYS (DOUBLE_ISINF (d));
mpfr_set_inf (x, -1);
d = mpfr_get_d (x, MPFR_RNDZ);
ASSERT_ALWAYS (d < 0);
ASSERT_ALWAYS (DOUBLE_ISINF (d));
mpfr_set_nan (x);
d = mpfr_get_d (x, MPFR_RNDZ);
ASSERT_ALWAYS (DOUBLE_ISNAN (d));
mpfr_clear (x);
#endif
}
开发者ID:Canar，项目名称:mpfr，代码行数:27，代码来源:tget_d.c
示例2: check_inf_nan
static void
check_inf_nan (void)
{
/* only if nans and infs are available */
#if _GMP_IEEE_FLOATS
mpfr_t x;
double d;
long exp;
mpfr_init2 (x, 123);
mpfr_set_inf (x, 1);
d = mpfr_get_d_2exp (&exp, x, MPFR_RNDZ);
ASSERT_ALWAYS (d > 0);
ASSERT_ALWAYS (DOUBLE_ISINF (d));
mpfr_set_inf (x, -1);
d = mpfr_get_d_2exp (&exp, x, MPFR_RNDZ);
ASSERT_ALWAYS (d < 0);
ASSERT_ALWAYS (DOUBLE_ISINF (d));
mpfr_set_nan (x);
d = mpfr_get_d_2exp (&exp, x, MPFR_RNDZ);
ASSERT_ALWAYS (DOUBLE_ISNAN (d));
mpfr_clear (x);
#endif
}
开发者ID:Distrotech，项目名称:mpfr，代码行数:28，代码来源:tget_d_2exp.c
示例3: fun_fscanf
int
fun_fscanf (const char *input, const char *fmt, void *a1, void *a2)
{
FILE *fp;
int ret;
fp = fopen (TEMPFILE, "w+");
ASSERT_ALWAYS (fp != NULL);
ASSERT_ALWAYS (fputs (input, fp) != EOF);
ASSERT_ALWAYS (fflush (fp) == 0);
rewind (fp);
if (a2 == NULL)
ret = fscanf (fp, fmt, a1);
else
ret = fscanf (fp, fmt, a1, a2);
got_ftell = ftell (fp);
ASSERT_ALWAYS (got_ftell != -1L);
fromstring_next_c = getc (fp);
ASSERT_ALWAYS (fclose (fp) == 0);
return ret;
}
开发者ID:KrisChaplin，项目名称:LRT2x4_v1.0.2.06_GPL_source，代码行数:25，代码来源:t-scanf.c
示例4: xrange
/*
max_freq = 10000000
for prescaler in xrange(int(TIMEVT_INPUT_CLOCK / float(max_freq) + 0.5), 65535 + 1):
if TIMEVT_INPUT_CLOCK % prescaler:
continue
if int(1e9) % (TIMEVT_INPUT_CLOCK / prescaler):
continue
print prescaler, TIMEVT_INPUT_CLOCK / prescaler, int(1e9) / (TIMEVT_INPUT_CLOCK / prescaler)
*/
void motor_timer_init(void)
{
chSysDisable();
// Power-on and reset
TIMEVT_RCC_ENR |= TIMEVT_RCC_ENR_MASK;
TIMEVT_RCC_RSTR |= TIMEVT_RCC_RSTR_MASK;
TIMEVT_RCC_RSTR &= ~TIMEVT_RCC_RSTR_MASK;
TIMSTP_RCC_ENR |= TIMSTP_RCC_ENR_MASK;
TIMSTP_RCC_RSTR |= TIMSTP_RCC_RSTR_MASK;
TIMSTP_RCC_RSTR &= ~TIMSTP_RCC_RSTR_MASK;
chSysEnable();
// Find the optimal prescaler value
uint32_t prescaler = (uint32_t)(TIMEVT_INPUT_CLOCK / ((float)MAX_FREQUENCY)); // Initial value
if (prescaler < 1)
prescaler = 1;
for (;; prescaler++) {
ASSERT_ALWAYS(prescaler < 0xFFFF);
if (TIMEVT_INPUT_CLOCK % prescaler) {
continue;
}
const uint32_t prescaled_clock = TIMEVT_INPUT_CLOCK / prescaler;
if (INT_1E9 % prescaled_clock) {
continue;
}
break; // Ok, current prescaler value can divide the timer frequency with no remainder
}
_nanosec_per_tick = INT_1E9 / (TIMEVT_INPUT_CLOCK / prescaler);
ASSERT_ALWAYS(_nanosec_per_tick < 1000); // Make sure it is sane
printf("Motor: Timer resolution: %u nanosec\n", (unsigned)_nanosec_per_tick);
// Enable IRQ
nvicEnableVector(TIMEVT_IRQn, MOTOR_IRQ_PRIORITY_MASK);
nvicEnableVector(TIMSTP_IRQn, MOTOR_IRQ_PRIORITY_MASK);
// Start the event timer
TIMEVT->ARR = 0xFFFF;
TIMEVT->PSC = (uint16_t)(prescaler - 1);
TIMEVT->CR1 = TIM_CR1_URS;
TIMEVT->SR = 0;
TIMEVT->EGR = TIM_EGR_UG; // Reload immediately
TIMEVT->CR1 = TIM_CR1_CEN; // Start
// Start the timestamping timer
TIMSTP->ARR = 0xFFFF;
TIMSTP->PSC = (uint16_t)(prescaler - 1);
TIMSTP->CR1 = TIM_CR1_URS;
TIMSTP->SR = 0;
TIMSTP->EGR = TIM_EGR_UG; // Reload immediately
TIMSTP->DIER = TIM_DIER_UIE;
TIMSTP->CR1 = TIM_CR1_CEN; // Start
}
开发者ID:Aerobota，项目名称:sapog，代码行数:67，代码来源:motor_timer.c
示例5: adc_calibrate
static void adc_calibrate(ADC_TypeDef* const adc)
{
// RSTCAL
ASSERT_ALWAYS(!(adc->CR2 & ADC_CR2_RSTCAL));
adc->CR2 |= ADC_CR2_RSTCAL;
while (adc->CR2 & ADC_CR2_RSTCAL) { }
// CAL
ASSERT_ALWAYS(!(adc->CR2 & ADC_CR2_CAL));
adc->CR2 |= ADC_CR2_CAL;
while (adc->CR2 & ADC_CR2_CAL) { }
}
开发者ID:branux，项目名称:sapog，代码行数:12，代码来源:motor_adc.c
示例6: hubii_eint_init
void
hubii_eint_init(cnodeid_t cnode)
{
int bit, rv;
ii_iidsr_u_t hubio_eint;
hubinfo_t hinfo;
cpuid_t intr_cpu;
devfs_handle_t hub_v;
ii_ilcsr_u_t ilcsr;
int bit_pos_to_irq(int bit);
int synergy_intr_connect(int bit, int cpuid);
hub_v = (devfs_handle_t)cnodeid_to_vertex(cnode);
ASSERT_ALWAYS(hub_v);
hubinfo_get(hub_v, &hinfo);
ASSERT(hinfo);
ASSERT(hinfo->h_cnodeid == cnode);
ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);
if ((ilcsr.ii_ilcsr_fld_s.i_llp_stat & 0x2) == 0) {
/*
* HUB II link is not up.
* Just disable LLP, and don't connect any interrupts.
*/
ilcsr.ii_ilcsr_fld_s.i_llp_en = 0;
REMOTE_HUB_S(hinfo->h_nasid, IIO_ILCSR, ilcsr.ii_ilcsr_regval);
return;
}
/* Select a possible interrupt target where there is a free interrupt
* bit and also reserve the interrupt bit for this IO error interrupt
*/
intr_cpu = intr_heuristic(hub_v,0,INTRCONNECT_ANYBIT,II_ERRORINT,hub_v,
"HUB IO error interrupt",&bit);
if (intr_cpu == CPU_NONE) {
printk("hubii_eint_init: intr_reserve_level failed, cnode %d", cnode);
return;
}
rv = intr_connect_level(intr_cpu, bit, 0, NULL);
synergy_intr_connect(bit, intr_cpu);
request_irq(bit_pos_to_irq(bit) + (intr_cpu << 8), hubii_eint_handler, 0, "SN hub error", (void *)hub_v);
ASSERT_ALWAYS(rv >= 0);
hubio_eint.ii_iidsr_regval = 0;
hubio_eint.ii_iidsr_fld_s.i_enable = 1;
hubio_eint.ii_iidsr_fld_s.i_level = bit;/* Take the least significant bits*/
hubio_eint.ii_iidsr_fld_s.i_node = COMPACT_TO_NASID_NODEID(cnode);
hubio_eint.ii_iidsr_fld_s.i_pi_id = cpuid_to_subnode(intr_cpu);
REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, hubio_eint.ii_iidsr_regval);
}
开发者ID:ya-mouse，项目名称:cnu-680pro，代码行数:53，代码来源:huberror.c
示例7: hubii_eint_init
void
hubii_eint_init(cnodeid_t cnode)
{
int bit, rv;
ii_iidsr_u_t hubio_eint;
hubinfo_t hinfo;
cpuid_t intr_cpu;
vertex_hdl_t hub_v;
int bit_pos_to_irq(int bit);
ii_ilcsr_u_t ilcsr;
hub_v = (vertex_hdl_t)cnodeid_to_vertex(cnode);
ASSERT_ALWAYS(hub_v);
hubinfo_get(hub_v, &hinfo);
ASSERT(hinfo);
ASSERT(hinfo->h_cnodeid == cnode);
ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);
if ((ilcsr.ii_ilcsr_fld_s.i_llp_stat & 0x2) == 0) {
/*
* HUB II link is not up. Disable LLP. Clear old errors.
* Enable interrupts to handle BTE errors.
*/
ilcsr.ii_ilcsr_fld_s.i_llp_en = 0;
REMOTE_HUB_S(hinfo->h_nasid, IIO_ILCSR, ilcsr.ii_ilcsr_regval);
}
/* Select a possible interrupt target where there is a free interrupt
* bit and also reserve the interrupt bit for this IO error interrupt
*/
intr_cpu = intr_heuristic(hub_v,0,SGI_II_ERROR,0,hub_v,
"HUB IO error interrupt",&bit);
if (intr_cpu == CPU_NONE) {
printk("hubii_eint_init: intr_reserve_level failed, cnode %d", cnode);
return;
}
rv = intr_connect_level(intr_cpu, SGI_II_ERROR, 0, NULL);
request_irq(SGI_II_ERROR, hubii_eint_handler, SA_SHIRQ, "SN_hub_error", (void *)hub_v);
irq_desc(bit)->status |= SN2_IRQ_PER_HUB;
ASSERT_ALWAYS(rv >= 0);
hubio_eint.ii_iidsr_regval = 0;
hubio_eint.ii_iidsr_fld_s.i_enable = 1;
hubio_eint.ii_iidsr_fld_s.i_level = bit;/* Take the least significant bits*/
hubio_eint.ii_iidsr_fld_s.i_node = COMPACT_TO_NASID_NODEID(cnode);
hubio_eint.ii_iidsr_fld_s.i_pi_id = cpuid_to_subnode(intr_cpu);
REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, hubio_eint.ii_iidsr_regval);
}
开发者ID:romanalexander，项目名称:Trickles，代码行数:51，代码来源:shuberror.c
示例8: check_one
void
check_one (mpf_srcptr src, mpf_srcptr trunc, mpf_srcptr ceil, mpf_srcptr floor)
{
mpf_t got;
mpf_init2 (got, mpf_get_prec (trunc));
ASSERT_ALWAYS (PREC(got) == PREC(trunc));
ASSERT_ALWAYS (PREC(got) == PREC(ceil));
ASSERT_ALWAYS (PREC(got) == PREC(floor));
#define CHECK_SEP(name, fun, want) \
mpf_set_ui (got, 54321L); /* initial junk */ \
fun (got, src); \
MPF_CHECK_FORMAT (got); \
if (mpf_cmp (got, want) != 0) \
{ \
printf ("%s wrong\n", name); \
check_print (src, got, want); \
abort (); \
}
CHECK_SEP ("mpf_trunc", mpf_trunc, trunc);
CHECK_SEP ("mpf_ceil", mpf_ceil, ceil);
CHECK_SEP ("mpf_floor", mpf_floor, floor);
#define CHECK_INPLACE(name, fun, want) \
mpf_set (got, src); \
fun (got, got); \
MPF_CHECK_FORMAT (got); \
if (mpf_cmp (got, want) != 0) \
{ \
printf ("%s wrong\n", name); \
check_print (src, got, want); \
abort (); \
}
CHECK_INPLACE ("mpf_trunc", mpf_trunc, trunc);
/* Can't do these unconditionally in case truncation by mpf_set strips
some low non-zero limbs which would have rounded the result. */
if (ABSIZ(src) <= PREC(trunc)+1)
{
CHECK_INPLACE ("mpf_ceil", mpf_ceil, ceil);
CHECK_INPLACE ("mpf_floor", mpf_floor, floor);
}
mpf_clear (got);
}
开发者ID:AllardJ，项目名称:Tomato，代码行数:48，代码来源:t-trunc.c
示例9: check_fib_table
void
check_fib_table (void)
{
int i;
for (i = 1; i <= FIB_TABLE_LIMIT; i++)
ASSERT_ALWAYS (FIB_TABLE(i) != 0);
}
开发者ID:mahdiz，项目名称:mpclib，代码行数:7，代码来源:t-fib_ui.c
示例10: mlreset
void
mlreset(int slave)
{
if (!slave) {
/*
* We are the master cpu and node.
*/
master_nasid = get_nasid();
set_master_bridge_base();
/* We're the master processor */
master_procid = smp_processor_id();
master_nasid = cpuid_to_nasid(master_procid);
/*
* master_nasid we get back better be same as one from
* get_nasid()
*/
ASSERT_ALWAYS(master_nasid == get_nasid());
/* early initialization of iograph */
iograph_early_init();
/* Initialize Hub Pseudodriver Management */
hubdev_init();
} else { /* slave != 0 */
/*
* This code is performed ONLY by slave processors.
*/
}
}
开发者ID:dduval，项目名称:kernel-rhel3，代码行数:33，代码来源:ml_SN_init.c
示例11: mpn_redc_n
void
mpn_redc_n (mp_ptr rp, mp_ptr up, mp_srcptr mp, mp_size_t n, mp_srcptr ip)
{
mp_ptr xp, yp, scratch;
mp_limb_t cy;
mp_size_t rn;
TMP_DECL;
TMP_MARK;
ASSERT (n > 8);
rn = mpn_mulmod_bnm1_next_size (n);
scratch = TMP_ALLOC_LIMBS (n + rn + mpn_mulmod_bnm1_itch (rn, n, n));
xp = scratch;
mpn_mullo_n (xp, up, ip, n);
yp = scratch + n;
mpn_mulmod_bnm1 (yp, rn, xp, n, mp, n, scratch + n + rn);
ASSERT_ALWAYS (2 * n > rn); /* could handle this */
cy = mpn_sub_n (yp + rn, yp, up, 2*n - rn); /* undo wrap around */
MPN_DECR_U (yp + 2*n - rn, rn, cy);
cy = mpn_sub_n (rp, up + n, yp + n, n);
if (cy != 0)
mpn_add_n (rp, rp, mp, n);
TMP_FREE;
}
开发者ID:AlexeiSheplyakov，项目名称:gmp.pkg，代码行数:32，代码来源:redc_n.c
示例12: check_various
void
check_various (void)
{
mpf_t got;
mpq_t q;
mpf_init (got);
mpq_init (q);
/* 1/1 == 1 */
mpf_set_prec (got, 20L);
mpq_set_ui (q, 1L, 1L);
mpf_set_q (got, q);
MPF_CHECK_FORMAT (got);
ASSERT_ALWAYS (mpf_cmp_ui (got, 1L) == 0);
/* 1/(2^n+1), a case where truncating the divisor would be wrong */
mpf_set_prec (got, 500L);
mpq_set_ui (q, 1L, 1L);
mpz_mul_2exp (mpq_denref(q), mpq_denref(q), 800L);
mpz_add_ui (mpq_denref(q), mpq_denref(q), 1L);
check_one (got, q);
mpf_clear (got);
mpq_clear (q);
}
开发者ID:BrianGladman，项目名称:mpir，代码行数:26，代码来源:t-set_q.c
示例13: check_various
void
check_various (void)
{
mpf_t got, u, v;
mpf_init (got);
mpf_init (u);
mpf_init (v);
/* 100/4 == 25 */
mpf_set_prec (got, 20L);
mpf_set_ui (u, 100L);
mpf_set_ui (v, 4L);
mpf_div (got, u, v);
MPF_CHECK_FORMAT (got);
ASSERT_ALWAYS (mpf_cmp_ui (got, 25L) == 0);
/* 1/(2^n+1), a case where truncating the divisor would be wrong */
mpf_set_prec (got, 500L);
mpf_set_prec (v, 900L);
mpf_set_ui (v, 1L);
mpf_mul_2exp (v, v, 800L);
mpf_add_ui (v, v, 1L);
mpf_div (got, u, v);
check_one ("1/2^n+1, separate", got, u, v);
mpf_clear (got);
mpf_clear (u);
mpf_clear (v);
}
开发者ID:AlexeiSheplyakov，项目名称:gmp.pkg，代码行数:30，代码来源:t-div.c
示例14: _vic_set_interrupt_vector
void _vic_set_interrupt_vector(OS_InterruptVector isr, UINT32 index)
{
// VIC0
if(index < 32)
{
*VIC0VECTADDR(index) = (UINT32) isr;
}
// VIC1
else if(index < 64)
{
*VIC1VECTADDR(index - 32) = (UINT32) isr;
}
// VIC2
else if(index < 96)
{
*VIC2VECTADDR(index - 64) = (UINT32) isr;
}
// VIC3
else if(index < 128)
{
*VIC3VECTADDR(index - 96) = (UINT32) isr;
}
else
{
ASSERT_ALWAYS("Invalid interrupt index");
}
return;
}
开发者ID:bbhat，项目名称:charm，代码行数:29，代码来源:vic.c
示例15: check_one
void
check_one (const char *desc, mpf_ptr got, mpf_srcptr u, mpir_ui v)
{
mp_size_t usize, usign;
mp_ptr wp;
mpf_t want;
MPF_CHECK_FORMAT (got);
/* this code not nailified yet */
ASSERT_ALWAYS (BITS_PER_UI <= GMP_NUMB_BITS);
usign = SIZ (u);
usize = ABS (usign);
wp = refmpn_malloc_limbs (usize + 1);
wp[usize] = mpn_mul_1 (wp, PTR(u), usize, (mp_limb_t) v);
PTR(want) = wp;
SIZ(want) = (usign >= 0 ? usize+1 : -(usize+1));
EXP(want) = EXP(u) + 1;
refmpf_normalize (want);
if (! refmpf_validate ("mpf_mul_ui", got, want))
{
mp_trace_base = -16;
printf (" %s\n", desc);
mpf_trace (" u", u);
printf (" v %ld 0x%lX\n", v, v);
abort ();
}
free (wp);
}
开发者ID:BrianGladman，项目名称:mpir，代码行数:32，代码来源:t-mul_ui.c
示例16: mpz_to_mpn
static void
mpz_to_mpn (mp_ptr ap, mp_size_t an, const mpz_t b)
{
mp_size_t bn = mpz_size (b);
ASSERT_ALWAYS (bn <= an);
MPN_COPY_INCR (ap, mpz_limbs_read (b), bn);
MPN_ZERO (ap + bn, an - bn);
}
开发者ID:ChristopherRussell，项目名称:gap，代码行数:8，代码来源:t-minvert.c
示例17: my__gmpn_tdiv_qr
void
my__gmpn_tdiv_qr (mp_ptr qp, mp_ptr rp, mp_size_t qxn,
mp_srcptr np, mp_size_t nn, mp_srcptr dp, mp_size_t dn)
{
ASSERT_ALWAYS (qxn == 0);
ASSERT (nn >= 0);
ASSERT (dn >= 0);
ASSERT (dn == 0 || dp[dn - 1] != 0);
ASSERT (! MPN_OVERLAP_P (qp, nn - dn + 1 + qxn, np, nn));
ASSERT (! MPN_OVERLAP_P (qp, nn - dn + 1 + qxn, dp, dn));
int adjust;
gmp_pi1_t dinv;
TMP_DECL;
TMP_MARK;
/* conservative tests for quotient size */
adjust = np[nn - 1] >= dp[dn - 1];
mp_ptr n2p, d2p;
mp_limb_t cy;
int cnt;
qp[nn - dn] = 0; /* zero high quotient limb */
count_leading_zeros (cnt, dp[dn - 1]);
cnt -= GMP_NAIL_BITS;
d2p = TMP_ALLOC_LIMBS (dn);
mpn_lshift (d2p, dp, dn, cnt);
for (int i=0; i<dn; i+=1)
{
printf("d2p %08x\n", *( (int*) (((void*)(d2p))+(i*4))));
}
n2p = TMP_ALLOC_LIMBS (nn + 1);
cy = mpn_lshift (n2p, np, nn, cnt);
for (int i=0; i<nn; i+=1)
{
printf("n2p %08x\n", *( (int*) (((void*)(n2p))+(i*4))));
}
n2p[nn] = cy;
nn += adjust;
printf("d2p[dn-1] = %08lx\nd2p[dn-2] = %08lx\n", d2p[dn-1], d2p[dn-2]);
invert_pi1 (dinv, d2p[dn - 1], d2p[dn - 2]);
printf("dinv %08lx\n", dinv.inv32);
my_mpn_sbpi1_div_qr (qp, n2p, nn, d2p, dn, dinv.inv32);
for (int i=0; i<nn; i+=1)
{
printf("inside qp %08x\n", *( (int*) (((void*)(qp))+(i*4))));
}
n2p[nn] = cy;
mpn_rshift (rp, n2p, dn, cnt);
TMP_FREE;
return;
}
开发者ID:ysangkok，项目名称:gmp-emscripten-tests，代码行数:58，代码来源:my_tdiv_qr.c
示例18: do_hub_intr_alloc
static hub_intr_t
do_hub_intr_alloc(devfs_handle_t dev,
device_desc_t dev_desc,
devfs_handle_t owner_dev,
int uncond_nothread)
{
cpuid_t cpu = 0;
int vector;
hub_intr_t intr_hdl;
cnodeid_t cnode;
int cpuphys, slice;
int nasid;
iopaddr_t xtalk_addr;
struct xtalk_intr_s *xtalk_info;
xwidget_info_t xwidget_info;
ilvl_t intr_swlevel = 0;
cpu = intr_heuristic(dev, dev_desc, -1, 0, owner_dev, NULL, &vector);
if (cpu == CPU_NONE) {
printk("Unable to allocate interrupt for 0x%p\n", (void *)owner_dev);
return(0);
}
cpuphys = cpu_physical_id(cpu);
slice = cpu_physical_id_to_slice(cpuphys);
nasid = cpu_physical_id_to_nasid(cpuphys);
cnode = cpuid_to_cnodeid(cpu);
if (slice) {
xtalk_addr = SH_II_INT1 | GLOBAL_MMR_SPACE |
((unsigned long)nasid << 36) | (1UL << 47);
} else {
xtalk_addr = SH_II_INT0 | GLOBAL_MMR_SPACE |
((unsigned long)nasid << 36) | (1UL << 47);
}
intr_hdl = snia_kmem_alloc_node(sizeof(struct hub_intr_s), KM_NOSLEEP, cnode);
ASSERT_ALWAYS(intr_hdl);
xtalk_info = &intr_hdl->i_xtalk_info;
xtalk_info->xi_dev = dev;
xtalk_info->xi_vector = vector;
xtalk_info->xi_addr = xtalk_addr;
xwidget_info = xwidget_info_get(dev);
if (xwidget_info) {
xtalk_info->xi_target = xwidget_info_masterid_get(xwidget_info);
}
intr_hdl->i_swlevel = intr_swlevel;
intr_hdl->i_cpuid = cpu;
intr_hdl->i_bit = vector;
intr_hdl->i_flags |= HUB_INTR_IS_ALLOCED;
hub_device_desc_update(dev_desc, intr_swlevel, cpu);
return(intr_hdl);
}
开发者ID:muromec，项目名称:linux-ezxdev，代码行数:58，代码来源:shub_intr.c
示例19: Run
void Run(){
TestRunnerThread runner;
runner.start();
nitki::Thread::sleep(1000);
ASSERT_ALWAYS(runner.success)
runner.join();
}
开发者ID:dgu123，项目名称:nitki，代码行数:10，代码来源:tests.cpp
示例20: ThreadGetHandle
HANDLE ThreadGetHandle(DWORD ThreadId)
{
SHARED_ACQUIRE(LockThreads);
if(threadList.find(ThreadId) != threadList.end())
return threadList[ThreadId].Handle;
ASSERT_ALWAYS("Trying to get handle of a thread that doesn't exist!");
return nullptr;
}
开发者ID:V10git，项目名称:x64dbg，代码行数:10，代码来源:thread.cpp
注：本文中的ASSERT_ALWAYS函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论