本文整理汇总了C++中ATLASSERT函数的典型用法代码示例。如果您正苦于以下问题:C++ ATLASSERT函数的具体用法?C++ ATLASSERT怎么用?C++ ATLASSERT使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ATLASSERT函数的16个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: GetRegister
/// returns processor register
BYTE GetRegister(RegisterID enRegisterID)
{
ATLASSERT(enRegisterID <= regLast);
return m_abRegister[enRegisterID];
}
开发者ID:vividos,项目名称:OldStuff,代码行数:6,代码来源:Processor6510.hpp
示例2: ATLASSERT
BOOL CNBLogicalDevice::InitConnectionInfo(PNDASCOMM_CONNECTION_INFO ci, BOOL bWriteAccess)
{
ATLASSERT(m_mapUnitDevices.size());
return PrimaryUnitDevice()->InitConnectionInfo(ci, bWriteAccess);
}
开发者ID:tigtigtig,项目名称:ndas4windows,代码行数:6,代码来源:nbdev.cpp
示例3: ThreadProc
DWORD CALLBACK ThreadProc(PVOID pv)
{
HANDLE hEvent = *(PHANDLE)pv;
HANDLE hEvents[PIPES];
OVERLAPPEDEX Ovlxs[PIPES];
SID_IDENTIFIER_AUTHORITY sia = SECURITY_WORLD_SID_AUTHORITY;
PSID psid = NULL;
ATLASSERT(::AllocateAndInitializeSid(
&sia,
1,
SECURITY_WORLD_RID,
0,
0,
0,
00,
0,
0,
0,
&psid));
EXPLICIT_ACCESS ea = { 0 };
ea.grfAccessPermissions = FILE_ALL_ACCESS;
ea.grfAccessMode = SET_ACCESS;
ea.grfInheritance = NO_INHERITANCE;
ea.Trustee.TrusteeForm = TRUSTEE_IS_SID;
ea.Trustee.TrusteeType = TRUSTEE_IS_WELL_KNOWN_GROUP;
ea.Trustee.ptstrName = (LPTSTR)psid;
PACL pacl = NULL;
ATLASSERT(::SetEntriesInAcl(1, &ea, NULL, &pacl) == ERROR_SUCCESS);
PSECURITY_DESCRIPTOR psd = ::LocalAlloc(LPTR, SECURITY_DESCRIPTOR_MIN_LENGTH);
ATLASSERT(::InitializeSecurityDescriptor(psd, SECURITY_DESCRIPTOR_REVISION));
ATLASSERT(::SetSecurityDescriptorDacl(psd, TRUE, pacl, FALSE));
SECURITY_ATTRIBUTES sa = { 0 };
sa.nLength = sizeof(SECURITY_ATTRIBUTES);
sa.lpSecurityDescriptor = psd;
sa.bInheritHandle = FALSE;
for (int i = 0; i < PIPES; i++)
{
ZeroMemory(&Ovlxs[i], sizeof(OVERLAPPEDEX));
Ovlxs[i].hPipe = (CHandle)::CreateNamedPipe(
NAMED_PIPE,
PIPE_ACCESS_INBOUND | FILE_FLAG_OVERLAPPED,
PIPE_WAIT | PIPE_READMODE_MESSAGE | PIPE_TYPE_MESSAGE,
PIPES,
BUF_SIZE,
BUF_SIZE,
2500,
&sa);
//::_tprintf(_T("CreateNamedPipe(): %ld\n"), ::GetLastError());
ATLASSERT(Ovlxs[i].hPipe != INVALID_HANDLE_VALUE);
hEvents[i] = Ovlxs[i].Ovl.hEvent = ::CreateEvent(NULL, TRUE, FALSE, NULL);
//::_tprintf(_T("CreateEvent(): %ld\n"), ::GetLastError());
ATLASSERT(hEvents[i] != NULL);
ATLASSERT(::ConnectNamedPipe(Ovlxs[i].hPipe, (LPOVERLAPPED)&Ovlxs[i]) == 0);
//::_tprintf(_T("ConnectNamedPipe(): %ld\n"), ::GetLastError());
ATLASSERT(::GetLastError() == ERROR_IO_PENDING);
}
::SetEvent(hEvent);
TCHAR szBuf[BUF_SIZE];
while (::_tcscmp(szBuf, _T("QUIT")))
{
//::_tprintf(_T("Connecting...\n"));
DWORD dwIndex = ::WaitForMultipleObjects(PIPES, hEvents, FALSE, INFINITE) - WAIT_OBJECT_0;
//::_tprintf(_T("Connected.\n"));
DWORD dwBytes = 0;
BOOL bRes = ::GetOverlappedResult(Ovlxs[dwIndex].hPipe, (LPOVERLAPPED)&Ovlxs[dwIndex], &dwBytes, FALSE);
bRes = ::ReadFile(Ovlxs[dwIndex].hPipe, szBuf, sizeof(szBuf), &dwBytes, NULL);
if (bRes && dwBytes > 0)
::_tprintf(_T("[%s]\n"), szBuf);
ATLASSERT(::DisconnectNamedPipe(Ovlxs[dwIndex].hPipe));
ATLASSERT(::ConnectNamedPipe(Ovlxs[dwIndex].hPipe, (LPOVERLAPPED)&Ovlxs[dwIndex]) == 0);
ATLASSERT(::GetLastError() == ERROR_IO_PENDING);
}
for (int i = 0; i < PIPES; i++)
{
::DisconnectNamedPipe(Ovlxs[i].hPipe);
::CloseHandle(Ovlxs[i].Ovl.hEvent);
}
::FreeSid(psid);
//.........这里部分代码省略.........
开发者ID:dranger003,项目名称:Win32ConsoleApplication10,代码行数:101,代码来源:Win32ConsoleApplication1.cpp
示例4: ATLTRACE
STDMETHODIMP CCUBRIDRowset::DeleteRows(HCHAPTER hReserved, DBCOUNTITEM cRows,
const HROW rghRows[], DBROWSTATUS rgRowStatus[])
{
ATLTRACE(atlTraceDBProvider, 2, "CCUBRIDRowset::DeleteRows\n");
ClearError();
if(m_nStatus==1) return RaiseError(E_UNEXPECTED, 1, __uuidof(IRowsetChange), L"This object is in a zombie state");
CHECK_UPDATABILITY(DBPROPVAL_UP_DELETE);
if(cRows==0) return S_OK;
if(rghRows==NULL && cRows>=1) return RaiseError(E_INVALIDARG, 0, __uuidof(IRowsetChange));
// Determine if we're in immediate or deferred mode
bool bDeferred = IsDeferred(this);
int hConn = GetSessionPtr()->GetConnection();
UINT uCodepage = GetSessionPtr()->GetCodepage();
BOOL bSuccess = false;
BOOL bFailed = false;
for(DBCOUNTITEM i=0;i<cRows;i++)
{
HROW hRow = rghRows[i];
// Attempt to locate the row in our map
CCUBRIDRowsetRow *pRow;
{
bool bFound = m_rgRowHandles.Lookup((ULONG)hRow, pRow);
if(!bFound || pRow==NULL)
{ // invalid handle
bFailed = true;
if(rgRowStatus) rgRowStatus[i] = DBROWSTATUS_E_INVALID;
continue;
}
}
if(pRow->m_status==DBPENDINGSTATUS_DELETED)
{ // already deleted
if(rgRowStatus) rgRowStatus[i] = DBROWSTATUS_E_DELETED;
bFailed = true;
continue;
}
ATLASSERT( pRow->m_iRowset==(ULONG)-1 || pRow->m_iRowset<m_rgRowData.GetCount() );
DBROWSTATUS rowStat = DBROWSTATUS_S_OK;
// mark the row as deleted
if(pRow->m_status==DBPENDINGSTATUS_INVALIDROW)
{
bFailed = true;
// unsigned high bit signified neg. number
if(pRow->m_dwRef & 0x80000000)
rowStat = DBROWSTATUS_E_INVALID;
else
rowStat = DBROWSTATUS_E_DELETED;
}
else if(pRow->m_iRowset==(ULONG)-1 && pRow->m_status!=DBPENDINGSTATUS_NEW)
{ // 새로 삽입되었고 Storage로 전송됐다.
bFailed = true;
rowStat = DBROWSTATUS_E_NEWLYINSERTED;
}
else
{
bSuccess = true;
rowStat = DBROWSTATUS_S_OK;
if(pRow->m_status==DBPENDINGSTATUS_NEW)
MakeRowInvalid(this, pRow);
else
pRow->m_status = DBPENDINGSTATUS_DELETED;
}
if(!bDeferred && pRow->m_status==DBPENDINGSTATUS_DELETED)
{ // 변화를 지금 적용
// CCUBRIDRowsetRow의 delete는 ReleaseRows에서 이루어진다.
HRESULT hr = pRow->WriteData(hConn, uCodepage, GetRequestHandle(), m_strTableName);
if(FAILED(hr)) return hr;
MakeRowInvalid(this, pRow);
}
if(rgRowStatus) rgRowStatus[i] = rowStat;
}
if(!bDeferred)
DoCommit(this); // commit
if(bFailed)
{
if(bSuccess)
return DB_S_ERRORSOCCURRED;
else
return RaiseError(DB_E_ERRORSOCCURRED, 0, __uuidof(IRowsetChange));
}
else
return S_OK;
}
开发者ID:CUBRID,项目名称:cubrid-oledb,代码行数:97,代码来源:RowsetChange.cpp
示例5: CLocalResult
CLocalResult()
{
ATLASSERT(false);
}
开发者ID:dehilsterlexis,项目名称:eclide-1,代码行数:4,代码来源:LocalResult.cpp
示例6: SetRegister
/// sets processor register
void SetRegister(RegisterID enRegisterID, BYTE bValue)
{
ATLASSERT(enRegisterID <= regLast);
m_abRegister[enRegisterID] = bValue;
}
开发者ID:vividos,项目名称:OldStuff,代码行数:6,代码来源:Processor6510.hpp
示例7: ATLASSERT
void CStatistic::ReplacePlaceholders( CString & szUrl, const CString & szType, const CString & szAction )
{
if (szUrl.IsEmpty())
{
ATLASSERT(FALSE);
return;
}
if (m_szPID.IsEmpty())
{
m_szPID = GetPID();
}
if (m_szMID.IsEmpty())
{
GetMID(m_szMID.GetBufferSetLength(MAX_PATH), MAX_PATH);
}
if (m_szAppVer.IsEmpty())
{
WCHAR szFile[MAX_PATH] = {};
GetModuleFileName(g_hModule, szFile, MAX_PATH);
PathRemoveFileSpec(szFile);
PathRemoveFileSpec(szFile);
PathAppend(szFile, APP_NAME);
GetFileVer(szFile, m_szAppVer.GetBufferSetLength(MAX_PATH), MAX_PATH);
}
if (m_szModVer.IsEmpty())
{
WCHAR szFile[MAX_PATH] = {};
GetModuleFileName(g_hModule, szFile, MAX_PATH);
GetFileVer(szFile, m_szModVer.GetBufferSetLength(MAX_PATH), MAX_PATH);
}
if (szUrl.Find(URL_PID) > 0)
{
szUrl.Replace(URL_PID, m_szPID);
}
if (szUrl.Find(URL_MID) > 0)
{
szUrl.Replace(URL_MID, m_szMID);
}
if (szUrl.Find(URL_APP_VER) > 0)
{
szUrl.Replace(URL_APP_VER, m_szAppVer);
}
if (szUrl.Find(URL_MOD_VER) > 0)
{
szUrl.Replace(URL_MOD_VER, m_szModVer);
}
if (szUrl.Find(URL_TYPE) > 0)
{
szUrl.Replace(URL_TYPE, szType);
}
if (szUrl.Find(URL_ACTION) > 0)
{
szUrl.Replace(URL_ACTION, szAction);
}
}
开发者ID:N2oBeef,项目名称:vc_scan,代码行数:67,代码来源:Statistics.cpp
示例8: ATLASSERT
CMsgOnlyWnd::~CMsgOnlyWnd()
{
ATLASSERT(NULL == hwnd_);
}
开发者ID:SammyLan,项目名称:Raptor,代码行数:5,代码来源:MsgOnlyWnd.cpp
示例9: _tmain
int _tmain(int argc, _TCHAR* argv[])
{
{
//TP_CALLBACK_ENVIRON cbe = { 0 };
//::InitializeThreadpoolEnvironment(&cbe);
//PTP_POOL ptpp = ::CreateThreadpool(NULL);
//ATLASSERT(ptpp != NULL);
//::SetThreadpoolThreadMaximum(ptpp, 16);
//::SetThreadpoolCallbackPool(&cbe, ptpp);
//PTP_CLEANUP_GROUP ptpcg = ::CreateThreadpoolCleanupGroup();
//::SetThreadpoolCallbackCleanupGroup(&cbe, ptpcg, NULL);
//PTP_WORK ptpw = ::CreateThreadpoolWork(&WorkCallback1, (PVOID)&cbe, &cbe);
//::SubmitThreadpoolWork(ptpw);
{
CHandle hEvent = (CHandle)::CreateEvent(NULL, TRUE, FALSE, NULL);
DWORD dwThreadId = 0;
CHandle hThread = (CHandle)::CreateThread(NULL, 0, &ThreadProc, (PVOID)&hEvent, 0, &dwThreadId);
::WaitForSingleObject(hEvent, INFINITE);
::InstallHook();
::_getch();
::UninstallHook();
CHandle hPipe = (CHandle)::CreateFile(
NAMED_PIPE,
GENERIC_WRITE,
0,
NULL,
OPEN_EXISTING,
0,
NULL);
DWORD dwLastError = ::GetLastError();
ATLASSERT(hPipe != INVALID_HANDLE_VALUE);
DWORD dwMode = PIPE_READMODE_MESSAGE;
ATLASSERT(::SetNamedPipeHandleState(hPipe, &dwMode, NULL, NULL));
TCHAR szBuf[BUF_SIZE];
DWORD dwBytes = 0;
::_stprintf_s(szBuf, _T("QUIT"));
::WriteFile(hPipe, szBuf, sizeof(szBuf), &dwBytes, NULL);
::FlushFileBuffers(hPipe);
::DisconnectNamedPipe(hPipe);
::WaitForSingleObject(hThread, INFINITE);
}
//::WaitForThreadpoolWorkCallbacks(ptpw, FALSE);
//::CloseThreadpoolCleanupGroupMembers(ptpcg, FALSE, NULL);
//::CloseThreadpoolCleanupGroup(ptpcg);
//::CloseThreadpool(ptpp);
}
::_getch();
return 0;
}
开发者ID:dranger003,项目名称:Win32ConsoleApplication10,代码行数:67,代码来源:Win32ConsoleApplication1.cpp
示例10: ATLENSURE_RETURN_HR
HRESULT ThreadController::Resume(_In_ BREAKRESUMEACTION breakResumeAction, _In_ ERRORRESUMEACTION errorResumeAction)
{
ATLENSURE_RETURN_HR(ThreadHelpers::IsOnDispatchThread(m_dispatchThreadId), E_UNEXPECTED);
if (!this->IsConnected() || !this->IsAtBreak())
{
return E_NOT_VALID_STATE;
}
HRESULT hr = S_OK;
// Scope for the CallFrame lock, the local smart pointer's addref will keep it alive after the lock
CComPtr<IRemoteDebugApplicationThread> spDebugThreadKeepAlive;
{
// Lock the callstack, so that we are thread safe
CComCritSecLock<CComAutoCriticalSection> lock(m_csCallFramesLock);
// Create a local smart pointer to addRef so that it won't be released by the other thread while we are using it
spDebugThreadKeepAlive = m_spCurrentBrokenThread;
}
if (spDebugThreadKeepAlive.p != nullptr)
{
// Since we are about to resume, we clear all the current break information
this->ClearBreakInfo();
// By default we abort any errors so that exceptions execute the expected path.
// If we want to support 'continue from exception' such as after using setNextStatement during an exception break,
// we should pass in ERRORRESUMEACTION_SkipErrorStatement,
// But we should not do that by default as it changes the behavior of exceptions when running under the debugger and should only be
// enabled through a user action.
unique_ptr<ResumeFromBreakpointInfo> spResumeFromBreakpointInfo(new ResumeFromBreakpointInfo());
spResumeFromBreakpointInfo->spDebugThread = spDebugThreadKeepAlive;
spResumeFromBreakpointInfo->breakResumeAction = breakResumeAction;
spResumeFromBreakpointInfo->errorResumeAction = errorResumeAction;
// Get the IRemoteDebugApplication using our helper function that keeps it thread safe
CComPtr<IRemoteDebugApplication> spDebugAppKeepAlive;
hr = this->GetRemoteDebugApplication(spDebugAppKeepAlive);
// We need to check if spDebugAppKeepAlive is null, since the debugger may have been activated
// while debugging was disabled (e.g.: after the profiler started).
// If that happened, then m_spDebugApplication would be null when we tried to AddRef it.
if (hr == S_OK && spDebugAppKeepAlive.p != nullptr)
{
// Get the IDebugApplicationThread interface used to make the actual thread switch call
#ifdef _WIN64
CComQIPtr<IDebugApplicationThread64> spDebugThread(spDebugThreadKeepAlive);
#else
CComQIPtr<IDebugApplicationThread> spDebugThread(spDebugThreadKeepAlive);
#endif
ATLENSURE_RETURN_HR(spDebugThread.p != nullptr, E_NOINTERFACE);
CComQIPtr<IDebugApplication> spDebugApp(spDebugAppKeepAlive);
ATLENSURE_RETURN_HR(spDebugApp.p != nullptr, E_NOINTERFACE);
// Create an object for thread switching on to the debugger thread
CComObject<PDMThreadCallback>* pCall;
hr = CComObject<PDMThreadCallback>::CreateInstance(&pCall);
BPT_FAIL_IF_NOT_S_OK(hr);
// We need to make sure that all pending 'Eval' calls have been completed on the current thread before we resume, otherwise the PDM will attempt
// to dequeue and execute an eval after we have resumed, causing chakra to assert that the debugging session has changed (eval started on previous break)
// Queuing a request onto the Sync Queue in the PDM will make sure that the Async evals have completed before we execute our resume.
// This is because the PDM executes all Async requests before any Sync ones (see CProcessThread::DoRequest() - debugger\pdm\scpthred.cpp)
CComObjPtr<PDMThreadCallback> spCall(pCall);
hr = spDebugThread->SynchronousCallIntoThread(spCall, (DWORD)PDMThreadCallbackMethod::CompleteEvals, (DWORD_PTR)spDebugApp.p, (DWORD_PTR)nullptr);
ATLASSERT(hr == S_OK); // We want to try a resume even if this fails (in retail bits)
}
// We need to call resume on the debugger thread so that we get the internal pdm locks in the correct order:
// m_csCrossThreadCallLock then m_csBreakPoint
// If we call ResumeFromBreakPoint directly, we will end up getting the locks in the reverse order which can cause a deadlock.
hr = this->CallDebuggerThread(PDMThreadCallbackMethod::Resume, (DWORD_PTR)nullptr, (DWORD_PTR)spResumeFromBreakpointInfo.release());
// This could fail if we already disconnected, so don't assert, but do return the hr
}
else
{
// We are no longer at a break
return E_NOT_VALID_STATE;
}
// The synchronous call to resume can occasionally cause a PDM break, if that happens, we will still be at a break here, so don't update IE
if (!this->IsAtBreak())
{
// Inform the BHO that we have resumed from the break
// We need to use send message to make sure that the pipe handler has sent the message to the BHO before we
// continue processing messages
::SendMessageW(m_hwndDebugPipeHandler, WM_BREAKMODECHANGED, /*IsAtBreak=*/ FALSE, NULL);
}
return hr;
}
开发者ID:DickvdBrink,项目名称:IEDiagnosticsAdapter,代码行数:94,代码来源:ThreadController.cpp
示例11: switch
BOOL CNBLogicalDevice::GetCommandAbility(int nID)
{
if (IsGroup()) {
switch(nID)
{
case IDM_TOOL_BIND:
return TRUE;
case IDM_TOOL_UNBIND:
// Cannot unbind devices in use.
return !(GetStatus() & NDASBIND_LOGICAL_DEVICE_STATUS_MOUNTED);
case IDM_TOOL_ADDMIRROR:
return FALSE;
case IDM_TOOL_MIGRATE:
return (
IsHDD() && IsMigrationRequired() && IsOperatableAll() && !HasMissingMember());
case IDM_TOOL_REPLACE_DEVICE:
return FALSE;
case IDM_TOOL_USE_AS_MEMBER:
return FALSE;
case IDM_TOOL_SPAREADD:
return (IsFaultTolerant() && !IsMigrationRequired() && IsOperatableAll() && IsHealthy() && DevicesSpare(FALSE)==0);
case IDM_TOOL_RESET_BIND_INFO:
return FALSE;
case IDM_TOOL_CLEAR_DEFECTIVE:
return FALSE;
case IDM_TOOL_USE_AS_BASIC:
return FALSE;
case IDM_TOOL_REMOVE_FROM_RAID:
return FALSE;
default:
ATLASSERT(FALSE);
return FALSE;
}
} else {
// Basic disk type.
switch(nID)
{
case IDM_TOOL_BIND:
return TRUE;
case IDM_TOOL_UNBIND:
return FALSE;
case IDM_TOOL_ADDMIRROR:
return (IsHDD() && IsOperatableAll());
case IDM_TOOL_MIGRATE:
return FALSE;
case IDM_TOOL_REPLACE_DEVICE:
return FALSE;
case IDM_TOOL_USE_AS_MEMBER:
return FALSE;
case IDM_TOOL_SPAREADD:
return FALSE;
case IDM_TOOL_RESET_BIND_INFO:
return (IsHDD() && IsOperatable());
case IDM_TOOL_CLEAR_DEFECTIVE:
return FALSE;
case IDM_TOOL_USE_AS_BASIC:
return FALSE;
case IDM_TOOL_REMOVE_FROM_RAID:
return FALSE;
default:
ATLASSERT(FALSE);
return FALSE;
}
}
return FALSE;
}
开发者ID:tigtigtig,项目名称:ndas4windows,代码行数:66,代码来源:nbdev.cpp
示例12: pCacheMsiToSystem
//.........这里部分代码省略.........
LPTSTR szCachedMsiFile,
DWORD cchMax)
{
TCHAR szMsiFileFullPath[MAX_PATH] = {0};
LPTSTR lpFilePart = NULL;
DWORD nChars = ::GetFullPathName(
szMsiFile,
MAX_PATH,
szMsiFileFullPath,
&lpFilePart);
if (0 == nChars) {
DWORD dwErr = GetLastError();
DBGPRT_ERR_EX(_FT("GetFullPathName %s failed: "), szMsiFile);
return dwErr;
}
TCHAR szCacheFile[MAX_PATH] = {0};
// nChars = GetSystemWindowsDirectory(szCacheFile, MAX_PATH);
nChars = GetWindowsDirectory(szCacheFile, MAX_PATH);
if (0 == nChars) {
DWORD dwErr = GetLastError();
DBGPRT_ERR_EX(_FT("GetSystemWindowsDirectory failed: "));
return dwErr;
}
HRESULT hr = StringCchCat(szCacheFile, MAX_PATH, _T("\\"));
if (FAILED(hr)) {
DBGPRT_ERR_EX(_FT("StringCchCat failed: "));
return HRESULT_CODE(hr);
}
hr = StringCchCat(szCacheFile, MAX_PATH, MSICACHE_DIRECTORY);
if (FAILED(hr)) {
DBGPRT_ERR_EX(_FT("StringCchCat failed: "));
return HRESULT_CODE(hr);
}
LPTSTR szPackageCode = pGetMsiPackageCode(szMsiFile);
if (NULL == szPackageCode) {
DWORD dwErr = GetLastError();
return dwErr;
}
if (szPackageCode[0] != _T('\0')) {
hr = StringCchCat(szCacheFile, MAX_PATH, _T("\\"));
if (FAILED(hr)) {
DBGPRT_ERR_EX(_FT("StringCchCat failed: "));
GlobalFree((HGLOBAL)szPackageCode);
return HRESULT_CODE(hr);
}
hr = StringCchCat(szCacheFile, MAX_PATH, szPackageCode);
if (FAILED(hr)) {
DBGPRT_ERR_EX(_FT("StringCchCat failed: "));
GlobalFree((HGLOBAL)szPackageCode);
return HRESULT_CODE(hr);
}
GlobalFree((HGLOBAL)szPackageCode);
}
hr = StringCchCat(szCacheFile, MAX_PATH, _T("\\"));
if (FAILED(hr)) {
DBGPRT_ERR_EX(_FT("StringCchCat failed: "));
return HRESULT_CODE(hr);
}
hr = StringCchCat(szCacheFile, MAX_PATH, lpFilePart);
if (FAILED(hr)) {
DBGPRT_ERR_EX(_FT("StringCchCat failed: "));
return HRESULT_CODE(hr);
}
SHFILEOPSTRUCT shop;
shop.hwnd = pSetupUI->GetCurrentWindow();
shop.wFunc = FO_COPY;
shop.pFrom = szMsiFileFullPath; // doubly NULL-terminated!!
shop.pTo = szCacheFile;
shop.fFlags = FOF_FILESONLY | FOF_NOCONFIRMMKDIR | FOF_NOCONFIRMATION |
FOF_NOCOPYSECURITYATTRIBS |
FOF_SILENT;
INT iRet = SHFileOperation(&shop);
if (ERROR_SUCCESS != iRet) {
DWORD dwErr = GetLastError();
CString str;
str.FormatMessage(IDS_ERR_CACHING_TO_SYSTEM_FMT,szCacheFile);
pSetupUI->PostErrorMessageBox(GetLastError(),str);
return dwErr;
}
hr = StringCchCopy(szCachedMsiFile, cchMax, szCacheFile);
ATLASSERT(SUCCEEDED(hr));
return ERROR_SUCCESS;
}
开发者ID:tigtigtig,项目名称:ndas4windows,代码行数:101,代码来源:winutil.cpp
示例13: CenterWindow
LRESULT CMainDlg::OnInitDialog(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
{
// center the dialog on the screen
CenterWindow();
// Set window icon
SetIcon(::LoadIcon(_Module.GetResourceInstance(), MAKEINTRESOURCE(IDR_MAINFRAME)), 0);
// Load heading icon
HMODULE hExeModule = LoadLibrary(m_sImageName);
if(hExeModule)
{
// Use IDR_MAINFRAME icon which is the default one for the crashed application.
m_HeadingIcon = ::LoadIcon(hExeModule, MAKEINTRESOURCE(IDR_MAINFRAME));
}
// If there is no IDR_MAINFRAME icon in crashed EXE module, use IDI_APPLICATION system icon
if(m_HeadingIcon == NULL)
{
m_HeadingIcon = ::LoadIcon(NULL, MAKEINTRESOURCE(IDI_APPLICATION));
}
m_link.SubclassWindow(GetDlgItem(IDC_LINK));
m_link.SetHyperLinkExtendedStyle(HLINK_COMMANDBUTTON);
m_linkMoreInfo.SubclassWindow(GetDlgItem(IDC_MOREINFO));
m_linkMoreInfo.SetHyperLinkExtendedStyle(HLINK_COMMANDBUTTON);
m_statEmail = GetDlgItem(IDC_STATMAIL);
m_editEmail = GetDlgItem(IDC_EMAIL);
m_statDesc = GetDlgItem(IDC_DESCRIBE);
m_editDesc = GetDlgItem(IDC_DESCRIPTION);
m_statCrashRpt = GetDlgItem(IDC_CRASHRPT);
m_statHorzLine = GetDlgItem(IDC_HORZLINE);
m_btnOk = GetDlgItem(IDOK);
m_btnCancel = GetDlgItem(IDCANCEL);
CRect rc1, rc2;
m_linkMoreInfo.GetWindowRect(&rc1);
m_statHorzLine.GetWindowRect(&rc2);
m_nDeltaY = rc1.bottom+15-rc2.top;
LOGFONT lf;
memset(&lf, 0, sizeof(LOGFONT));
lf.lfHeight = 25;
lf.lfWeight = FW_NORMAL;
lf.lfQuality = ANTIALIASED_QUALITY;
_TCSCPY_S(lf.lfFaceName, 32, _T("Tahoma"));
m_HeadingFont.CreateFontIndirect(&lf);
ShowMoreInfo(FALSE);
m_dlgProgress.Create(m_hWnd);
// register object for message filtering and idle updates
CMessageLoop* pLoop = _Module.GetMessageLoop();
ATLASSERT(pLoop != NULL);
pLoop->AddMessageFilter(this);
pLoop->AddIdleHandler(this);
UIAddChildWindowContainer(m_hWnd);
return TRUE;
}
开发者ID:doo,项目名称:CrashRpt,代码行数:64,代码来源:MainDlg.cpp
示例14: pGetMsiPackageCode
//
// Caller should free the resource for non-NULL return values
// with GlobalFree
//
static
LPTSTR
pGetMsiPackageCode(LPCTSTR szMsiFile)
{
MSIHANDLE hSummaryInfo = 0;
CMsiApi msiApi;
BOOL fSuccess = msiApi.Initialize();
if (!fSuccess) {
DBGPRT_ERR(_FT("MSIAPI functions are not available.\n"));
SetLastError(ERROR_PROC_NOT_FOUND);
return NULL;
}
UINT uiRet = msiApi.GetSummaryInformation(0, szMsiFile, 0, &hSummaryInfo);
if (ERROR_SUCCESS != uiRet) {
SetLastError(uiRet);
DBGPRT_ERR_EX(_FT("MsiGetSummaryInformation failed: "));
return NULL;
}
UINT uiDataType;
INT iValue;
FILETIME ftValue;
DWORD cchMax = 0;
//
// Get Package Code (PID_REVNUMBER)
//
uiRet = msiApi.SummmaryInfoGetProperty(
hSummaryInfo,
PID_REVNUMBER,
&uiDataType,
&iValue,
&ftValue,
_T(""), // do not pass NULL
&cchMax);
ATLASSERT(VT_LPSTR == uiDataType);
if (ERROR_SUCCESS == uiRet) {
ATLASSERT(FALSE);
return _T("");
} else if (ERROR_MORE_DATA != uiRet) {
SetLastError(uiRet);
DBGPRT_ERR_EX(_FT("MsiSummaryInfoGetProperty PID_REVNUMBER failed: "));
return NULL;
}
++cchMax; // Add NULL
LPTSTR szPackageCode = (LPTSTR)
::GlobalAlloc(GPTR, (cchMax) * sizeof(TCHAR));
if (NULL == szPackageCode) {
DBGPRT_ERR_EX(_FT("GlobalAlloc %d chars failed: "), cchMax );
return NULL;
}
uiRet = msiApi.SummmaryInfoGetProperty(
hSummaryInfo,
PID_REVNUMBER,
&uiDataType,
&iValue,
&ftValue,
szPackageCode,
&cchMax);
ATLASSERT(VT_LPSTR == uiDataType);
if (ERROR_SUCCESS != uiRet) {
DBGPRT_ERR_EX(_FT("SummmaryInfoGetProperty PID_REVNUMBER failed for %d chars: "), cchMax);
::GlobalFree((HGLOBAL)szPackageCode);
return NULL;
}
return szPackageCode;
}
开发者ID:tigtigtig,项目名称:ndas4windows,代码行数:81,代码来源:winutil.cpp
示例15: ATLASSERT
STDMETHODIMP CLHTMLWindow2::GetIDsOfNames(
REFIID riid, LPOLESTR* rgszNames, UINT cNames,
LCID lcid, DISPID* rgdispid
)
{
HRESULT hr;
hr = IDispatchExImpl<CLHTMLWindow2, DispILHTMLWindow, &IID_DispILHTMLWindow, &LIBID_LHTMLLib>::GetIDsOfNames(riid, rgszNames, cNames, lcid, rgdispid);
if (SUCCEEDED(hr))
{
return hr;
}
ATLASSERT(0);
#if 0 // TODO have this
if (m_pActiveDocument->m_containerScriptDispatch)
{
hr = m_pActiveDocument->m_containerScriptDispatch->GetIDsOfNames(riid, rgszNames, cNames, lcid, rgdispid);
if (SUCCEEDED(hr))
{
ATLASSERT(rgdispid[0] >= 0);
rgdispid[0] += 2000;
return hr;
}
}
#endif
return hr;
#if 0
for (int i = 0; i < cNames; i++)
{
DISPID dispid;
hr = IDispatchImpl<DispILHTMLWindow, &IID_DispILHTMLWindow, &LIBID_LHTMLLib>::GetIDsOfNames(riid, &rgszNames[i], 1, lcid, &dispid);
if (SUCCEEDED(hr))
{
rgdispid[i] = dispid;
continue;
}
hr = m_pActiveDocument->m_containerScriptDispatch->GetIDsOfNames(riid, &rgszNames[i], 1, lcid, &dispid);
if (SUCCEEDED(hr))
{
ATLASSERT(dispid >= 0);
rgdispid[i] = dispid+2000;
continue;
}
}
#endif
#if 0
hr = m_pFrame->m_pHTMLWindowImpl->GetIDsOfNames(riid, rgszNames, cNames, lcid, rgdispid);
if (FAILED(hr)) hr = m_pFrame->m_pHTMLDialogImpl->GetIDsOfNames(riid, rgszNames, cNames, lcid, rgdispid);
if (FAILED(hr))
{
hr = m_pFrame->m_pScriptDisp->GetIDsOfNames(riid, rgszNames, cNames, lcid, rgdispid);
if (SUCCEEDED(hr))
{
if (*rgdispid < 100)
ATLASSERT(0);
}
}
#endif
return hr;
}
开发者ID:sigurdle,项目名称:FirstProject2,代码行数:67,代码来源:LHTMLWindow.cpp
示例16: while
void CRunView::AddMenuItems(HMENU hMenu, IDrawMenu* pMenu, int& nIndex, int nCount, int nDepth)
{
USES_CONVERSION;
HTREEITEM hItem = NULL;
while (nIndex < nCount)
{
CComBSTR bstrItemText;
pMenu->GetItemText(nIndex + 1, &bstrItemText);
int nItemDepth = 0;
LPCWSTR p = bstrItemText;
while (*p++ == '.')
nItemDepth++;
if (nItemDepth < nDepth)
{
nIndex--;
break;
}
int nNextItemDepth = nItemDepth;
if (nIndex + 1 < nCount)
{
nNextItemDepth = 0;
CComBSTR bstrNextItemText;
pMenu->GetItemText(nIndex + 2, &bstrNextItemText);
LPCWSTR p = bstrNextItemText;
while (*p++ == '.')
nNextItemDepth++;
}
if (nNextItemDepth > nItemDepth)
{
HMENU hNewMenu = CreatePopupMenu();
ATLASSERT(hNewMenu != NULL);
AddMenuItems(hNewMenu, pMenu, ++nIndex, nCount, nDepth + 1);
AppendMenu(hMenu, MF_POPUP, (UINT)hNewMenu, OLE2T(bstrItemText + nItemDepth));
}
else
{
CString strItemText = bstrItemText + nItemDepth;
if (strItemText == _T("-"))
{
AppendMenu(hMenu, MF_SEPARATOR, 0, 0);
}
else
{
long lShift = 0;
pMenu->GetItemAccelShift(nIndex + 1, &lShift);
long lKeyCode = 0;
pMenu->GetItemAccelKeyCode(nIndex + 1, &lKeyCode);
ACCEL accel;
accel.fVirt = FVIRTKEY;
if ((lShift & 1) != 0)
accel.fVirt |= FSHIFT;
if ((lShift & 2) != 0)
accel.fVirt |= FCONTROL;
if ((lShift & 4) != 0)
accel.fVirt |= FALT;
accel.key = (USHORT)lKeyCode;
accel.cmd = nIndex + 1;
m_arrAccels.Add(accel);
CString strAccel = GetAccelKeyName(lShift, lKeyCode);
if (!strAccel.IsEmpty())
{
strItemText += _T("\t");
strItemText += strAccel;
}
AppendMenu(hMenu, MF_STRING | MF_BYCOMMAND, nIndex + 1, strItemText);
}
}
nIndex++;
}
}
开发者ID:JackWangCUMT,项目名称:SuperCxHMI,代码行数:83,代码来源:RunView.cpp
注:本文中的ATLASSERT函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。 |
请发表评论