C++ A_SIZE_8函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中A_SIZE_8函数的典型用法代码示例。如果您正苦于以下问题：C++ A_SIZE_8函数的具体用法？C++ A_SIZE_8怎么用？C++ A_SIZE_8使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了A_SIZE_8函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: intel_830mp_configure

static int intel_830mp_configure(void)
{
	u32 temp;
	u16 temp2;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);

	/* aperture size */
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);

	/* address to map to */
	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);

	/* attbase - aperture base */
	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

	/* agpctrl */
	pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x0000);

	/* gmch */
	pci_read_config_word(agp_bridge->dev, INTEL_NBXCFG, &temp2);
	pci_write_config_word(agp_bridge->dev, INTEL_NBXCFG, temp2 | (1 << 9));
	/* clear any possible AGP-related error conditions */
	pci_write_config_word(agp_bridge->dev, INTEL_I830_ERRSTS, 0x1c);
	return 0;
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:28，代码来源:intel-agp.c

示例2: intel_820_configure

static int intel_820_configure(void)
{
	u32 temp;
	u8 temp2;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);

	/* aperture size */
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);

	/* address to map to */
	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);

	/* attbase - aperture base */
	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

	/* agpctrl */
	pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x0000);

	/* global enable aperture access */
	/* This flag is not accessed through MCHCFG register as in */
	/* i850 chipset. */
	pci_read_config_byte(agp_bridge->dev, INTEL_I820_RDCR, &temp2);
	pci_write_config_byte(agp_bridge->dev, INTEL_I820_RDCR, temp2 | (1 << 1));
	/* clear any possible AGP-related error conditions */
	pci_write_config_word(agp_bridge->dev, INTEL_I820_ERRSTS, 0x001c);
	return 0;
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:30，代码来源:intel-agp.c

示例3: i460_insert_memory_large_io_page

static int i460_insert_memory_large_io_page (struct agp_memory *mem,
				off_t pg_start, int type)
{
	int i, start_offset, end_offset, idx, pg, num_entries;
	struct lp_desc *start, *end, *lp;
	void *temp;

	if (type >= AGP_USER_TYPES || mem->type >= AGP_USER_TYPES)
		return -EINVAL;

	temp = agp_bridge->current_size;
	num_entries = A_SIZE_8(temp)->num_entries;

	/* Figure out what pg_start means in terms of our large GART pages */
	start = &i460.lp_desc[pg_start / I460_KPAGES_PER_IOPAGE];
	end = &i460.lp_desc[(pg_start + mem->page_count - 1) / I460_KPAGES_PER_IOPAGE];
	start_offset = pg_start % I460_KPAGES_PER_IOPAGE;
	end_offset = (pg_start + mem->page_count - 1) % I460_KPAGES_PER_IOPAGE;

	if (end > i460.lp_desc + num_entries) {
		printk(KERN_ERR PFX "Looks like we're out of AGP memory\n");
		return -EINVAL;
	}

	/* Check if the requested region of the aperture is free */
	for (lp = start; lp <= end; ++lp) {
		if (!lp->alloced_map)
			continue;	/* OK, the entire large page is available... */

		for (idx = ((lp == start) ? start_offset : 0);
		     idx < ((lp == end) ? (end_offset + 1) : I460_KPAGES_PER_IOPAGE);
		     idx++)
		{
			if (test_bit(idx, lp->alloced_map))
				return -EBUSY;
		}
	}

	for (lp = start, i = 0; lp <= end; ++lp) {
		if (!lp->alloced_map) {
			/* Allocate new GART pages... */
			if (i460_alloc_large_page(lp) < 0)
				return -ENOMEM;
			pg = lp - i460.lp_desc;
			WR_GATT(pg, agp_bridge->driver->mask_memory(agp_bridge,
				lp->paddr, 0));
			WR_FLUSH_GATT(pg);
		}

		for (idx = ((lp == start) ? start_offset : 0);
		     idx < ((lp == end) ? (end_offset + 1) : I460_KPAGES_PER_IOPAGE);
		     idx++, i++)
		{
			mem->memory[i] = lp->paddr + idx*PAGE_SIZE;
			__set_bit(idx, lp->alloced_map);
			++lp->refcount;
		}
	}
	return 0;
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:60，代码来源:i460-agp.c

示例4: intel_7505_configure

static int intel_7505_configure(void)
{
	u32 temp;
	u16 temp2;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);

	/* aperture size */
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);

	/* address to map to */
	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);

	/* attbase - aperture base */
	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

	/* agpctrl */
	pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x0000);

	/* mchcfg */
	pci_read_config_word(agp_bridge->dev, INTEL_I7505_MCHCFG, &temp2);
	pci_write_config_word(agp_bridge->dev, INTEL_I7505_MCHCFG, temp2 | (1 << 9));

	return 0;
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:27，代码来源:intel-agp.c

示例5: intel_830mp_configure

static int intel_830mp_configure(void)
{
	u32 temp;
	u16 temp2;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);

	
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);

	
	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);

	
	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

	
	pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x0000);

	
	pci_read_config_word(agp_bridge->dev, INTEL_NBXCFG, &temp2);
	pci_write_config_word(agp_bridge->dev, INTEL_NBXCFG, temp2 | (1 << 9));
	
	pci_write_config_word(agp_bridge->dev, INTEL_I830_ERRSTS, 0x1c);
	return 0;
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:28，代码来源:intel-agp.c

示例6: intel_845_configure

static int intel_845_configure(void)
{
	u32 temp;
	u8 temp2;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);

	
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);

	if (agp_bridge->apbase_config != 0) {
		pci_write_config_dword(agp_bridge->dev, AGP_APBASE,
				       agp_bridge->apbase_config);
	} else {
		
		pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
		agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
		agp_bridge->apbase_config = temp;
	}

	
	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

	
	pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x0000);

	
	pci_read_config_byte(agp_bridge->dev, INTEL_I845_AGPM, &temp2);
	pci_write_config_byte(agp_bridge->dev, INTEL_I845_AGPM, temp2 | (1 << 1));
	
	pci_write_config_word(agp_bridge->dev, INTEL_I845_ERRSTS, 0x001c);
	return 0;
}

开发者ID:mjduddin，项目名称:B14CKB1RD_kernel_m8，代码行数:34，代码来源:intel-agp.c

示例7: intel_845_configure

static int intel_845_configure(void)
{
	u32 temp;
	u8 temp2;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);

	/* aperture size */
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);

	if (agp_bridge->apbase_config != 0) {
		pci_write_config_dword(agp_bridge->dev, AGP_APBASE,
				       agp_bridge->apbase_config);
	} else {
		/* address to map to */
		pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
		agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
		agp_bridge->apbase_config = temp;
	}

	/* attbase - aperture base */
	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

	/* agpctrl */
	pci_write_config_dword(agp_bridge->dev, INTEL_AGPCTRL, 0x0000);

	/* agpm */
	pci_read_config_byte(agp_bridge->dev, INTEL_I845_AGPM, &temp2);
	pci_write_config_byte(agp_bridge->dev, INTEL_I845_AGPM, temp2 | (1 << 1));
	/* clear any possible error conditions */
	pci_write_config_word(agp_bridge->dev, INTEL_I845_ERRSTS, 0x001c);
	return 0;
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:34，代码来源:intel-agp.c

示例8: nvidia_configure

static int nvidia_configure(void)
{
	int i, rc, num_dirs;
	u32 apbase, aplimit;
	struct aper_size_info_8 *current_size;
	u32 temp;

	current_size = A_SIZE_8(agp_bridge->current_size);

	/* aperture size */
	pci_write_config_byte(agp_bridge->dev, NVIDIA_0_APSIZE,
		current_size->size_value);

    /* address to map to */
	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &apbase);
	apbase &= PCI_BASE_ADDRESS_MEM_MASK;
	agp_bridge->gart_bus_addr = apbase;
	aplimit = apbase + (current_size->size * 1024 * 1024) - 1;
	pci_write_config_dword(nvidia_private.dev_2, NVIDIA_2_APBASE, apbase);
	pci_write_config_dword(nvidia_private.dev_2, NVIDIA_2_APLIMIT, aplimit);
	pci_write_config_dword(nvidia_private.dev_3, NVIDIA_3_APBASE, apbase);
	pci_write_config_dword(nvidia_private.dev_3, NVIDIA_3_APLIMIT, aplimit);
	if (0 != (rc = nvidia_init_iorr(apbase, current_size->size * 1024 * 1024)))
		return rc;

	/* directory size is 64k */
	num_dirs = current_size->size / 64;
	nvidia_private.num_active_entries = current_size->num_entries;
	nvidia_private.pg_offset = 0;
	if (num_dirs == 0) {
		num_dirs = 1;
		nvidia_private.num_active_entries /= (64 / current_size->size);
		nvidia_private.pg_offset = (apbase & (64 * 1024 * 1024 - 1) &
			~(current_size->size * 1024 * 1024 - 1)) / PAGE_SIZE;
	}

	/* attbase */
	for (i = 0; i < 8; i++) {
		pci_write_config_dword(nvidia_private.dev_2, NVIDIA_2_ATTBASE(i),
			(agp_bridge->gatt_bus_addr + (i % num_dirs) * 64 * 1024) | 1);
	}

	/* gtlb control */
	pci_read_config_dword(nvidia_private.dev_2, NVIDIA_2_GARTCTRL, &temp);
	pci_write_config_dword(nvidia_private.dev_2, NVIDIA_2_GARTCTRL, temp | 0x11);

	/* gart control */
	pci_read_config_dword(agp_bridge->dev, NVIDIA_0_APSIZE, &temp);
	pci_write_config_dword(agp_bridge->dev, NVIDIA_0_APSIZE, temp | 0x100);

	/* map aperture */
	nvidia_private.aperture =
		(volatile u32 __iomem *) ioremap(apbase, 33 * PAGE_SIZE);

	if (!nvidia_private.aperture)
		return -ENOMEM;

	return 0;
}

开发者ID:mikuhatsune001，项目名称:linux2.6.32，代码行数:59，代码来源:nvidia-agp.c

示例9: sis_cleanup

static void sis_cleanup(void)
{
	struct aper_size_info_8 *previous_size;

	previous_size = A_SIZE_8(agp_bridge->previous_size);
	pci_write_config_byte(agp_bridge->dev, SIS_APSIZE,
			      (previous_size->size_value & ~(0x03)));
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:8，代码来源:sis-agp.c

示例10: intel_8xx_cleanup

static void intel_8xx_cleanup(void)
{
	u16 temp;
	struct aper_size_info_8 *previous_size;

	previous_size = A_SIZE_8(agp_bridge->previous_size);
	pci_read_config_word(agp_bridge->dev, INTEL_NBXCFG, &temp);
	pci_write_config_word(agp_bridge->dev, INTEL_NBXCFG, temp & ~(1 << 9));
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, previous_size->size_value);
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:10，代码来源:intel-agp.c

示例11: i460_cleanup

static void i460_cleanup (void)
{
	struct aper_size_info_8 *previous_size;

	previous_size = A_SIZE_8(agp_bridge->previous_size);
	i460_write_agpsiz(previous_size->size_value);

	if (I460_IO_PAGE_SHIFT > PAGE_SHIFT)
		kfree(i460.lp_desc);
}

开发者ID:Epirex，项目名称:Chrono_Kernel-1，代码行数:10，代码来源:i460-agp.c

示例12: via_cleanup

static void via_cleanup(void)
{
	struct aper_size_info_8 *previous_size;

	previous_size = A_SIZE_8(agp_bridge->previous_size);
	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
			      previous_size->size_value);
	/* Do not disable by writing 0 to VIA_ATTBASE, it screws things up
	 * during reinitialization.
	 */
}

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:11，代码来源:via-agp.c

示例13: intel_820_cleanup

static void intel_820_cleanup(void)
{
	u8 temp;
	struct aper_size_info_8 *previous_size;

	previous_size = A_SIZE_8(agp_bridge->previous_size);
	pci_read_config_byte(agp_bridge->dev, INTEL_I820_RDCR, &temp);
	pci_write_config_byte(agp_bridge->dev, INTEL_I820_RDCR,
			temp & ~(1 << 1));
	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE,
			previous_size->size_value);
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:12，代码来源:intel-agp.c

示例14: sis_configure

static int sis_configure(void)
{
	u32 temp;
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);
	pci_write_config_byte(agp_bridge->dev, SIS_TLBCNTRL, 0x05);
	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
	pci_write_config_dword(agp_bridge->dev, SIS_ATTBASE,
			       agp_bridge->gatt_bus_addr);
	pci_write_config_byte(agp_bridge->dev, SIS_APSIZE,
			      current_size->size_value);
	return 0;
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:15，代码来源:sis-agp.c

示例15: i460_free_gatt_table

static int i460_free_gatt_table (struct agp_bridge_data *bridge)
{
	int num_entries, i;
	void *temp;

	temp = agp_bridge->current_size;

	num_entries = A_SIZE_8(temp)->num_entries;

	for (i = 0; i < num_entries; ++i)
		WR_GATT(i, 0);
	WR_FLUSH_GATT(num_entries - 1);

	iounmap(i460.gatt);
	return 0;
}

开发者ID:Epirex，项目名称:Chrono_Kernel-1，代码行数:16，代码来源:i460-agp.c

示例16: __intel_8xx_fetch_size

static int __intel_8xx_fetch_size(u8 temp)
{
	int i;
	struct aper_size_info_8 *values;

	values = A_SIZE_8(agp_bridge->driver->aperture_sizes);

	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
		if (temp == values[i].size_value) {
			agp_bridge->previous_size =
				agp_bridge->current_size = (void *) (values + i);
			agp_bridge->aperture_size_idx = i;
			return values[i].size;
		}
	}
	return 0;
}

开发者ID:mpcdata，项目名称:tnetv107x-usb，代码行数:17，代码来源:intel-agp.c

示例17: via_fetch_size

static int via_fetch_size(void)
{
	int i;
	u8 temp;
	struct aper_size_info_8 *values;

	values = A_SIZE_8(agp_bridge->driver->aperture_sizes);
	pci_read_config_byte(agp_bridge->dev, VIA_APSIZE, &temp);
	for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
		if (temp == values[i].size_value) {
			agp_bridge->previous_size =
			    agp_bridge->current_size = (void *) (values + i);
			agp_bridge->aperture_size_idx = i;
			return values[i].size;
		}
	}
	return 0;
}

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:18，代码来源:via-agp.c

示例18: i460_insert_memory_small_io_page

static int i460_insert_memory_small_io_page (struct agp_memory *mem,
				off_t pg_start, int type)
{
	unsigned long paddr, io_pg_start, io_page_size;
	int i, j, k, num_entries;
	void *temp;

	pr_debug("i460_insert_memory_small_io_page(mem=%p, pg_start=%ld, type=%d, paddr0=0x%lx)\n",
		 mem, pg_start, type, mem->memory[0]);

	if (type >= AGP_USER_TYPES || mem->type >= AGP_USER_TYPES)
		return -EINVAL;

	io_pg_start = I460_IOPAGES_PER_KPAGE * pg_start;

	temp = agp_bridge->current_size;
	num_entries = A_SIZE_8(temp)->num_entries;

	if ((io_pg_start + I460_IOPAGES_PER_KPAGE * mem->page_count) > num_entries) {
		printk(KERN_ERR PFX "Looks like we're out of AGP memory\n");
		return -EINVAL;
	}

	j = io_pg_start;
	while (j < (io_pg_start + I460_IOPAGES_PER_KPAGE * mem->page_count)) {
		if (!PGE_EMPTY(agp_bridge, RD_GATT(j))) {
			pr_debug("i460_insert_memory_small_io_page: GATT[%d]=0x%x is busy\n",
				 j, RD_GATT(j));
			return -EBUSY;
		}
		j++;
	}

	io_page_size = 1UL << I460_IO_PAGE_SHIFT;
	for (i = 0, j = io_pg_start; i < mem->page_count; i++) {
		paddr = mem->memory[i];
		for (k = 0; k < I460_IOPAGES_PER_KPAGE; k++, j++, paddr += io_page_size)
			WR_GATT(j, agp_bridge->driver->mask_memory(agp_bridge,
				paddr, mem->type));
	}
	WR_FLUSH_GATT(j - 1);
	return 0;
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:43，代码来源:i460-agp.c

示例19: i460_configure

static int i460_configure (void)
{
	union {
		u32 small[2];
		u64 large;
	} temp;
	size_t size;
	u8 scratch;
	struct aper_size_info_8 *current_size;

	temp.large = 0;

	current_size = A_SIZE_8(agp_bridge->current_size);
	i460_write_agpsiz(current_size->size_value);

	/*
	 * Do the necessary rigmarole to read all eight bytes of APBASE.
	 * This has to be done since the AGP aperture can be above 4GB on
	 * 460 based systems.
	 */
	pci_read_config_dword(agp_bridge->dev, i460.dynamic_apbase, &(temp.small[0]));
	pci_read_config_dword(agp_bridge->dev, i460.dynamic_apbase + 4, &(temp.small[1]));

	/* Clear BAR control bits */
	agp_bridge->gart_bus_addr = temp.large & ~((1UL << 3) - 1);

	pci_read_config_byte(agp_bridge->dev, INTEL_I460_GXBCTL, &scratch);
	pci_write_config_byte(agp_bridge->dev, INTEL_I460_GXBCTL,
			      (scratch & 0x02) | I460_GXBCTL_OOG | I460_GXBCTL_BWC);

	/*
	 * Initialize partial allocation trackers if a GART page is bigger than a kernel
	 * page.
	 */
	if (I460_IO_PAGE_SHIFT > PAGE_SHIFT) {
		size = current_size->num_entries * sizeof(i460.lp_desc[0]);
		i460.lp_desc = kzalloc(size, GFP_KERNEL);
		if (!i460.lp_desc)
			return -ENOMEM;
	}
	return 0;
}

开发者ID:Epirex，项目名称:Chrono_Kernel-1，代码行数:42，代码来源:i460-agp.c

示例20: via_configure

static int via_configure(void)
{
	struct aper_size_info_8 *current_size;

	current_size = A_SIZE_8(agp_bridge->current_size);
	/* aperture size */
	pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
			      current_size->size_value);
	/* address to map to */
	agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
						    AGP_APERTURE_BAR);

	/* GART control register */
	pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f);

	/* attbase - aperture GATT base */
	pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE,
			    (agp_bridge->gatt_bus_addr & 0xfffff000) | 3);
	return 0;
}

开发者ID:0-T-0，项目名称:ps4-linux，代码行数:20，代码来源:via-agp.c

注：本文中的A_SIZE_8函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ A_SIZE_LVL2函数代码示例发布时间：2022-05-30

C++ A_MEMZERO函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18458|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9758|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8232|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8594|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8505|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9477|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8490|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7912|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8474|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7437|2022-11-06

客服电话

电子邮件

C++ A_SIZE_8函数代码示例

示例1: intel_830mp_configure

示例2: intel_820_configure

示例3: i460_insert_memory_large_io_page

示例4: intel_7505_configure

示例5: intel_830mp_configure

示例6: intel_845_configure

示例7: intel_845_configure

示例8: nvidia_configure

示例9: sis_cleanup

示例10: intel_8xx_cleanup

示例11: i460_cleanup

示例12: via_cleanup

示例13: intel_820_cleanup

示例14: sis_configure

示例15: i460_free_gatt_table

示例16: __intel_8xx_fetch_size

示例17: via_fetch_size

示例18: i460_insert_memory_small_io_page

示例19: i460_configure

示例20: via_configure

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-21540

dustinvtran/ml-videos: A collection of v

delphi线程使用

ravikumar001/maven

更的笔顺,体会更的笔画,理会更的部首

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053