本文整理汇总了C++中Accept函数的典型用法代码示例。如果您正苦于以下问题：C++ Accept函数的具体用法？C++ Accept怎么用？C++ Accept使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了Accept函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: tinyHttpServer
int tinyHttpServer(int argc, char** argv) {
int listenfd, connfd, port, clientlen, logfd;
struct sockaddr_in clientaddr;
logfd = open("./runtimelog.txt", O_RDWR | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR | S_IRWXO);
runtimeLogFmt("logfd is %d\n", logfd);
if (argc != 2) {
fprintf(stderr, "usage: %s <port>\n", argv[0]);
exit(1);
}
port = atoi(argv[1]);
listenfd = Open_listenfd(port);
while (1) {
clientlen = sizeof(clientaddr);
connfd = Accept(listenfd, (SA *)&clientaddr, (socklen_t *)&clientlen);
runtimeLogFmt("enter doit()\n");
doit(connfd);
Close(connfd);
}
}
开发者ID:DeathPoem，项目名称:Practice，代码行数:21，代码来源:main.c
示例2: SetParallel
virtual void SetParallel (void) // overload virtual
{
Trafo A;
float fov, newfov = 1.0;
GetSelectionView(A,fov);
// Reduce the field of view angle fov to 1 degree
// scaling the z-coordinate of the translation part of the
// transformation matrix A(2,3) to make the image appear the
// same size.
A(2,3) *= tan(DegToRad(fov)) / tan(DegToRad(newfov));
SetSelectionView(A,newfov,
view->GetActiveGraphPtr()->vbx,
view->GetActiveGraphPtr()->vby,
view->GetActiveGraphPtr()->vbz);
Accept();
// finally always call method of base class of view panel for update
view->display->Viewport3DPanel->MpViewPanel::Accept();
}
开发者ID:lucafuji，项目名称:Gene-Correlation，代码行数:21，代码来源:mpviewport3d.cpp
示例3: switch
int MyServer::qt_metacall(QMetaObject::Call _c, int _id, void **_a)
{
_id = QObject::qt_metacall(_c, _id, _a);
if (_id < 0)
return _id;
if (_c == QMetaObject::InvokeMetaMethod) {
switch (_id) {
case 0: updateTextBrowser((*reinterpret_cast< QString(*)>(_a[1]))); break;
case 1: updateTextBrowserDlg((*reinterpret_cast< QString(*)>(_a[1])),(*reinterpret_cast< QString(*)>(_a[2]))); break;
case 2: addtoListWidget((*reinterpret_cast< QString(*)>(_a[1]))); break;
case 3: deletefromListWidget((*reinterpret_cast< QString(*)>(_a[1]))); break;
case 4: Service(); break;
case 5: Accept(); break;
case 6: DisplayError((*reinterpret_cast< QAbstractSocket::SocketError(*)>(_a[1]))); break;
case 7: OnDisconnected(); break;
default: ;
}
_id -= 8;
}
return _id;
}
开发者ID:kref，项目名称:mobileim，代码行数:21，代码来源:moc_myserver.cpp
示例4: main
int main(int argc, char **argv)
{
int listenfd, connfd, port, clientlen;
struct sockaddr_in clientaddr;
/* Check command line args */
if (argc != 2) {
fprintf(stderr, "usage: %s <port>\n", argv[0]);
exit(1);
}
port = atoi(argv[1]);
listenfd = Open_listenfd(port);
while (1) {
clientlen = sizeof(clientaddr);
connfd = Accept(listenfd, (SA *)&clientaddr, &clientlen); //line:netp:tiny:accept
//echo(connfd);
doit(connfd); //line:netp:tiny:doit
Close(connfd); //line:netp:tiny:close
}
}
开发者ID:Zak-Olyarnik，项目名称:CS-283，代码行数:21，代码来源:server.c
示例5: Accept
void CServerSocket::OnAccept(int nErrorCode)
{
// TODO: Add your specialized code here and/or call the base class
//接收客户端连接
CSocket client;
Accept(client);
//收发数据
//接收数据包的包头
HEADER header={0};
RecvData(client,(BYTE*)&header,sizeof(header));
//根据包头中的文件路径构造文件的服务器路径
CString strFileName=header.szFile;
int nFind=strFileName.ReverseFind('\\');
strFileName=strFileName.Mid(nFind+1);
CString strPath="c:\\"+strFileName;
AfxMessageBox(strPath);
//根据包头中的文件长度，接受文件数据
RecvFile(client,strPath,header.nLen);
CAsyncSocket::OnAccept(nErrorCode);
}
开发者ID:soplist，项目名称:study-c-cpp，代码行数:21，代码来源:ServerSocket.cpp
示例6: main
int main(int argc, char **argv)
{
int listenfd, connfd, port, clientlen;
struct sockaddr_in clientaddr;
if(argc !=2)
{
fprintf(stderr, "usage: %s <port>\n",argv[0]);
exit(1);
}
port = atoi(argv[1]);
listenfd = Open_listenfd(port);
while(1)//无线服务器循环
{
clientlen = sizeof(clientaddr);
connfd = Accept(listenfd, (SA*)&clientaddr, &clientlen);
doit(connfd);//执行事务
Close(connfd);
}
}
开发者ID:zhangyuguo001，项目名称:Tiny_Web_Server，代码行数:21，代码来源:tiny.c
示例7: child_main
void
child_main(int i, int listenfd, int addrlen)
{
int connfd;
void web_child(int);
socklen_t clilen;
struct sockaddr *cliaddr;
cliaddr = Malloc(addrlen);
printf("child %ld starting\n", (long) getpid());
for ( ; ; ) {
clilen = addrlen;
my_lock_wait();
connfd = Accept(listenfd, cliaddr, &clilen);
my_lock_release();
web_child(connfd); /* process the request */
Close(connfd);
}
}
开发者ID:elftech，项目名称:vmware-code，代码行数:21，代码来源:child04.c
示例8: Open_Buffer_Init
//---------------------------------------------------------------------------
void File_ChannelGrouping::Read_Buffer_Init()
{
if (Common==NULL)
{
Common=new common;
Common->Parser=new File_Aes3;
((File_Aes3*)Common->Parser)->SampleRate=SampleRate;
((File_Aes3*)Common->Parser)->ByteSize=ByteDepth*Channel_Total;
((File_Aes3*)Common->Parser)->IsAes3=IsAes3;
Common->Channels.resize(Channel_Total);
for (size_t Pos=0; Pos<Common->Channels.size(); Pos++)
Common->Channels[Pos]=new common::channel;
Element_Code=(int64u)-1;
Open_Buffer_Init(Common->Parser);
}
Accept(); //Forcing acceptance, no possibility to choose something else or detect PCM
#if MEDIAINFO_DEMUX
Demux_UnpacketizeContainer=Config->Demux_Unpacketize_Get();
#endif //MEDIAINFO_DEMUX
}
开发者ID:Dimetro83，项目名称:DC_DDD，代码行数:22，代码来源:File_ChannelGrouping.cpp
示例9: while
//---------------------------------------------------------------------------
bool File_DvbSubtitle::Synchronize()
{
//Synchronizing
if (MustFindDvbHeader)
{
while(Buffer_Offset+3<=Buffer_Size)
{
if (Buffer[Buffer_Offset]==0x20
&& Buffer[Buffer_Offset+1]==0x00
&& (Buffer[Buffer_Offset+2]==0x0F
|| Buffer[Buffer_Offset+1]==0xFF))
break;
Buffer_Offset++;
}
if (Buffer_Offset+3>Buffer_Size)
return false;
Accept();
}
else
{
while(Buffer_Offset<Buffer_Size)
{
if (Buffer[Buffer_Offset]==0x0F
|| Buffer[Buffer_Offset]==0xFF)
break;
Buffer_Offset++;
}
if (Buffer_Offset>=Buffer_Size)
return false;
}
//Synched is OK
Synched=true;
if (!Frame_Count_Valid)
Frame_Count_Valid=Config->ParseSpeed>=0.3?32:2;
return true;
}
开发者ID:MediaArea，项目名称:MediaInfoLib，代码行数:41，代码来源:File_DvbSubtitle.cpp
示例10: Get_L1
//---------------------------------------------------------------------------
void File_Ico::Data_Parse()
{
//Parsing
int32u Size, Offset;
int16u BitsPerPixel;
int8u Width, Height;
Get_L1 (Width, "Width");
Get_L1 (Height, "Height");
Skip_L1( "Colour count");
Skip_L1( "Reserved");
Skip_L2( Type==1?"Colour planes":"X hotspot");
Get_L2 (BitsPerPixel, Type==1?"Bits per pixel":"Y hotspot");
Get_L4 (Size, "Size of the bitmap data");
Get_L4 (Offset, "Offset of the bitmap data");
FILLING_BEGIN_PRECISE();
stream Stream;
Stream.Width=Width;
Stream.Height=Height;
Stream.BitsPerPixel=BitsPerPixel;
Stream.Size=Size;
Stream.Offset=Offset;
Streams.push_back(Stream);
IcoDataSize+=Size;
if (Offset>File_Size || File_Offset+Buffer_Offset+Element_Size+IcoDataSize>File_Size)
Reject("ICO");
Count--;
if (Count==0)
{
if (File_Offset+Buffer_Offset+Element_Size+IcoDataSize!=File_Size)
Reject("ICO");
else
{
Accept("ICO");
Finish("ICO");
}
}
FILLING_END();
}
开发者ID:asfdfdfd，项目名称:MediaInfoLib-Avdump2-Mac，代码行数:41，代码来源:File_Ico.cpp
示例11: Get_UTF8
//---------------------------------------------------------------------------
void File_TimedText::Data_Parse()
{
//Parsing
Ztring Value;
Get_UTF8 (Element_Size, Value, "Value");
FILLING_BEGIN();
if (!Status[IsAccepted])
{
Accept();
#ifdef MEDIAINFO_MPEG4_YES
if (IsChapter)
{
Stream_Prepare(Stream_Menu);
}
else
#endif //MEDIAINFO_MPEG4_YES
{
Stream_Prepare(Stream_Text);
}
Fill(StreamKind_Last, 0, Fill_Parameter(StreamKind_Last, Generic_Format), "Timed Text");
}
#ifdef MEDIAINFO_MPEG4_YES
if (IsChapter)
{
}
else
#endif //MEDIAINFO_MPEG4_YES
{
Finish();
}
#ifdef MEDIAINFO_MPEG4_YES
if (IsChapter && FrameInfo.DTS!=(int64u)-1 && Buffer_Offset==2)
Fill(Stream_Menu, 0, Ztring().Duration_From_Milliseconds(FrameInfo.DTS/1000000).To_UTF8().c_str(), Value);
#endif //MEDIAINFO_MPEG4_YES
FILLING_END();
Element_Offset=Buffer_Size-Buffer_Offset; //Buffer can also contain atoms after the text, ignoring them
}
开发者ID:0vermind，项目名称:NeoLoader，代码行数:41，代码来源:File_TimedText.cpp
示例12: main
int
main(int argc, char** argv)
{
int fd, optval, cfd;
struct sockaddr_in6 server_addr, client_addr;
socklen_t addr_len, client_addr_len;
time_t ticks;
char buf[BUFFER_SIZE];
fd = Socket(AF_INET6, SOCK_STREAM, 0);
optval = 1;
setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof optval);
optval = 0;
setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, &optval, sizeof optval);
memset((void *) &server_addr, 0, sizeof(server_addr));
server_addr.sin6_family = AF_INET6;
#ifdef HAVE_SIN_LEN
server_addr.sin6_len = sizeof(struct sockaddr_in6);
#endif
server_addr.sin6_addr = in6addr_any;
server_addr.sin6_port = htons(atoi(argv[1]));
Bind(fd, (const struct sockaddr *) &server_addr, sizeof(server_addr));
Listen(fd, 1);
for (;;) {
memset((void *) buf, '\0', sizeof(buf));
addr_len = (socklen_t) sizeof(client_addr);
memset((void *) &client_addr, 0, sizeof(client_addr));
client_addr_len = (socklen_t) sizeof(client_addr);
cfd = Accept(fd, (struct sockaddr *) &client_addr, &client_addr_len);
ticks = time(NULL);
snprintf(buf, sizeof(buf), "%.24s\r\n", ctime(&ticks));
printf("%ld\r\n", strlen(buf));
Sendto(cfd, (void *) buf, strlen(buf), 0, (struct sockaddr *)&client_addr, client_addr_len);
Close(cfd);
}
Close(fd);
return(0);
}
开发者ID:frenos，项目名称:inteng，代码行数:40，代码来源:daytime_server.c
示例13: main
int
main(int argc, char **argv) {
int listenfd, connfd;
socklen_t len;
struct sockaddr_in servaddr, cliaddr;
char buff[MAXLINE];
time_t ticks;
listenfd = Socket(AF_INET, SOCK_STREAM, 0);
bzero(&servaddr, sizeof (servaddr));
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
servaddr.sin_port = htons(9997); /* test*/
Bind(listenfd, (SA *) & servaddr, sizeof (servaddr));
Listen(listenfd, LISTENQ);
puts("listening...");
for (;;) {
len = sizeof (cliaddr);
connfd = Accept(listenfd, (SA *) & cliaddr, &len);
printf( "connection from %s, port %d\n",
Inet_ntop(AF_INET, &cliaddr.sin_addr, buff, sizeof (buff)),
ntohs(cliaddr.sin_port));
ticks = time(NULL);
snprintf(buff, sizeof (buff), "%.24s\r\n", ctime(&ticks));
//Write(connfd, buff, strlen(buff)); // normal version, write at once
int i; // call Write for each one byte
for (i = 0; i < strlen(buff); ++i) {
Write(connfd, &buff[i], 1);
}
printf( "writes: %d\n", i);
Close(connfd);
}
}
开发者ID:bharathvu，项目名称:unix_networking_projects，代码行数:40，代码来源:daytimeserver_1.c
示例14: main
int
main(int argc, char **argv)
{
int listenfd, connfd, n;
char buff[100];
fd_set rset, xset;
if (argc == 2)
listenfd = Tcp_listen(NULL, argv[1], NULL);
else if (argc == 3)
listenfd = Tcp_listen(argv[1], argv[2], NULL);
else
err_quit("usage: tcprecv02 [ <host> ] <port#>");
connfd = Accept(listenfd, NULL, NULL);
FD_ZERO(&rset);
FD_ZERO(&xset);
for ( ; ; ) {
FD_SET(connfd, &rset);
FD_SET(connfd, &xset);
Select(connfd + 1, &rset, NULL, &xset, NULL);
if (FD_ISSET(connfd, &xset)) {
n = Recv(connfd, buff, sizeof(buff)-1, MSG_OOB);
buff[n] = 0; /* null terminate */
printf("read %d OOB byte: %s\n", n, buff);
}
if (FD_ISSET(connfd, &rset)) {
if ( (n = Read(connfd, buff, sizeof(buff)-1)) == 0) {
printf("received EOF\n");
exit(0);
}
buff[n] = 0; /* null terminate */
printf("read %d bytes: %s\n", n, buff);
}
}
}
开发者ID:elftech，项目名称:vmware-code，代码行数:40，代码来源:tcprecv02.c
示例15: main
int main(int argc, char **argv)
{
if (argc != 2)
{
fprintf(stderr, "usage: %s <port>\n", argv[0]);
exit(1);
}
int listenfd, clientlen, port;
int *connfd;
struct sockaddr_in clientaddr;
pthread_t tid;
//pthread_rwlock_init(&host_lock, NULL);
pthread_rwlock_init(&lock, NULL);
//Ignore any sigpipe signals
Signal(SIGPIPE, SIG_IGN);
init_cache();
//get port number
port = atoi(argv[1]);
//start listening on the specified port number
listenfd = Open_listenfd(port);
while (1)
{
clientlen = sizeof(clientaddr);
connfd = malloc(sizeof(int));
//accept the connection
*connfd = Accept(listenfd,(SA *)&clientaddr,(unsigned int *)&clientlen);
//create a thread and run execute thread
Pthread_create(&tid, NULL, executeT, connfd);
}
return 0;
}
开发者ID:shilpamurthy，项目名称:HTTP-Proxy-server，代码行数:40，代码来源:proxy.c
示例16: P2PAccept
int P2PAccept(int Sockfd, struct sockaddr_in Dest, void(*Function) (void*), void* Arg){
if(List != NULL){ // 如果链表为空
LinkC_Debug("P2PAccept:LinkC Socket环境没有初始化",LINKC_FAILURE);
return LINKC_FAILURE; // 返回错误
}
LinkC_Socket *Socket = NULL;
if(IsSocketInList(Sockfd,&Socket)==0){
LinkC_Debug("P2PAccept:没有这个套接字",LINKC_FAILURE);
return -1;
}
EmptyPackageList(Socket->RecvList); // 清空发送和接收缓冲区
EmptyPackageList(Socket->SendList);
SetDestAddr(Sockfd,Dest);
int Length = _LCUDP_Package(NULL,0,Socket,CONNECTION_MESSAGE,Socket->SendBuffer);
___LinkC_Send(Socket,Socket->SendBuffer,Length,MSG_DONTWAIT);
if(Function != NULL){ // 执行函数，这里是我发送了无用信息后向服务端确认
Function(Arg);
}
Accept(Sockfd,Dest);
return 0;
}
开发者ID:ExAnthon，项目名称:LinkC，代码行数:22，代码来源:linkc_network_UDP_system.cpp
示例17: main
int main()
{
int listen_sid = Listen(1); // listen on port 1;
int socket_accept, socket_connect;
socket_accept = Accept(listen_sid);
char buf[6];
Receive(socket_accept, buf, 6, 1);
PutString(" Machine 1 has the : ");
PutString(buf); // should be totem
PutChar('\n');
socket_connect = Connect(2,1); // machine i+1
Send(socket_connect, "TOTEM", 6);
return 0;
}
开发者ID:sparklusive，项目名称:project-system，代码行数:22，代码来源:step6_ring_member.c
示例18: main
int main(int argc, char *argv[])
{
int sockfd = Socket(AF_INET,SOCK_STREAM,0);
struct sockaddr_in servaddr;
servaddr.sin_port = htons(SERV_PORT);
servaddr.sin_family = AF_INET;
servaddr.sin_addr.s_addr = INADDR_ANY;
socklen_t servlen = sizeof(servaddr);
Bind(sockfd, (struct sockaddr*) &servaddr, servlen);
Listen(sockfd, SOMAXCONN);
int clifd;
for(; ; )
{
clifd = Accept(sockfd, NULL, NULL);
if(clifd != -1)
{
pid_t child = Fork();
if(child == 0)
{
Close(sockfd);
printf("create child process success! \n");
break;
}
else
{
printf("child process pid [%d]", child);
}
}
}
// echo server
char buff[1024];
while(1)
{
Read(clifd,buff, 1024);
Write(clifd, buff, strlen(buff));
}
return 0;
}
开发者ID:yulingjie，项目名称:Net，代码行数:39，代码来源:tcpserv.c
示例19: connect
void CManageFileTransfer::slotFileReceived(const QString& szId, QSharedPointer<CFileTransfer> file)
{
bool check = connect(file.data(), SIGNAL(sigFinished(const QString&, const QString&)),
SLOT(slotFinished(const QString&, const QString&)));
Q_ASSERT(check);
m_FileTransfer.insertMulti(szId, file);
QSharedPointer<CUser> roster = GLOBAL_USER->GetUserInfoRoster(szId);
if(roster.isNull())
{
LOG_MODEL_ERROR("CManageFileTransfer", "There isn't roster:%s", szId.toStdString().c_str());
return;
}
if(CTool::isImageFile(file->GetFile()))
{
Accept(file);
}
QSharedPointer<CFileTransferAction> action(new CFileTransferAction(file, szId, QTime::currentTime(), false));
roster->GetMessage()->AddMessage(action);
GET_MAINWINDOW->ShowTrayIconMessage(roster->GetInfo()->GetShowName() + ":", tr("Send file %1").arg(file->GetFile()));
emit GET_CLIENT->sigMessageUpdate(szId);
}
开发者ID:corefan，项目名称:rabbitim，代码行数:22，代码来源:ManageFileTransfer.cpp
示例20: main
int main(int argc, char **argv)
{
int i, listenfd, connfd, port, clientlen=sizeof(struct sockaddr_in);
struct sockaddr_in clientaddr;
pthread_t tid;
if (argc != 2) {
fprintf(stderr, "usage: %s <port>\n", argv[0]);
exit(0);
}
port = atoi(argv[1]);
sbuf_init(&sbuf, SBUFSIZE);
listenfd = Open_listenfd(port);
for (i = 0; i < NTHREADS; i++) /* Create worker threads */
Pthread_create(&tid, NULL, thread, NULL);
while (1) {
connfd = Accept(listenfd, (SA *) &clientaddr, &clientlen);
sbuf_insert(&sbuf, connfd); /* Insert connfd in buffer */
}
}
开发者ID:09zwcbupt，项目名称:csapp，代码行数:22，代码来源:echoservert_pre.c
注：本文中的Accept函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论