C++ Animate函数代码示例

OGeek|极客世界-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中Animate函数的典型用法代码示例。如果您正苦于以下问题：C++ Animate函数的具体用法？C++ Animate怎么用？C++ Animate使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了Animate函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: Clear

void CExpensiveGiftCtrl::InsertGif(LPCTSTR szFilename,INT nNum)
{
		CString sTmp;
		CPictureExEx* pPicture=(CPictureExEx *)m_pSkinConfContext->GetPictureExEx(szFilename);
		if(pPicture==NULL)
		{
			m_bPicIsOK=FALSE;
			return;
		}
		else
			m_bPicIsOK=TRUE;

		m_cx=pPicture->m_PictureSize.cx;
		m_cy=pPicture->m_PictureSize.cy;
		if (m_cy>61)
			m_cy = 58;
		m_pPicture=pPicture;
        m_nThreadCurrent=0;
	    Clear();
	  	HDC hWinDC =::GetDC(NULL);
		//////////////创建一个GIF的设备/////////////////////
	 	m_hMenDC=CreateCompatibleDC(hWinDC);
		m_hMemBM=CreateCompatibleBitmap(hWinDC,m_pPicture->m_PictureSize.cx,m_pPicture->m_PictureSize.cy);
        SelectObject(m_hMenDC,m_hMemBM);
       	HBRUSH hBrush = CreateSolidBrush(RGB(232,243,255));
	    RECT rect = {0,0,m_pPicture->m_PictureSize.cx,m_pPicture->m_PictureSize.cy};
		FillRect(m_hMenDC,&rect,hBrush);
		Animate();
		::ReleaseDC(NULL,hWinDC);
		::DeleteObject(hBrush);
		SetTimer(1,70,NULL);
	
	
}

开发者ID:kkyoo，项目名称:TestKTV，代码行数:34，代码来源:ExpensiveGiftCtrl.cpp

示例2: Animate

void CXTPPopupControl::OnLButtonDown(UINT nFlags, CPoint point)
{

	if ((GetPopupState() == xtpPopupStateExpanding) && !m_bSplashScreenMode)
	{
		m_nStep = 0;
		Animate(0);
		//kill timer event
		KillTimer(TID_EXPANDING);
		OnShow();
	}

	//test point to pressed controll
	CXTPPopupItem* pPressed = HitTest(point);

	if (m_bAllowMove && (!pPressed || (!pPressed->GetID() && !pPressed->IsButton() && (pPressed->GetCaption().IsEmpty() || !pPressed->IsHyperLink()))))
	{
		TrackMove();
		return;
	}

	//if success test
	if (pPressed)
	{
		m_pPressed = pPressed;
		//set capture
		SetCapture();
		//redraw all valide controls
		RedrawControl();
	}


	CWnd::OnLButtonDown(nFlags, point);
}

开发者ID:killbug2004，项目名称:ghost2013，代码行数:34，代码来源:XTPPopupControl.cpp

示例3: Animate

void HangingLetterSign::LateUpdate()
{
	
	if(mActive)
		Animate();
	
}

开发者ID:kristofe，项目名称:GameEngine，代码行数:7，代码来源:HangingLetterSign.cpp

示例4: return

EXPORT_C TKeyResponse CEikButtonBase::OfferKeyEventL(const TKeyEvent& aKeyEvent,TEventCode aType)
    {
	const TInt code=aKeyEvent.iCode;
	if (code==EKeyDownArrow || code ==EKeyUpArrow)
		return(EKeyWasNotConsumed);
    if (aType!=EEventKey)
        return(EKeyWasConsumed);
	CEikButtonBase::TState oldState=State();
   	switch (code)
        {
	case EKeyLeftArrow:
	case EKeyTab:
    case EKeyRightArrow:
		Animate();
	default:
		;
		}
	TKeyResponse ret=EKeyWasNotConsumed;
	if (State()!=oldState)
		{
		ReportEventL(MCoeControlObserver::EEventStateChanged);
		ret=EKeyWasConsumed;
		}
    return ret;
	}

开发者ID:cdaffara，项目名称:symbiandump-mw1，代码行数:25，代码来源:EIKBUTB.CPP

示例5: onIdle

void onIdle ()
/* pre:  glut window is not doing anything else
   post: scene is updated and re-rendered if necessary */
{
  static int oldTime = 0;
	
  if (isAnimating)
    {
		
      int currentTime = glutGet((GLenum)(GLUT_ELAPSED_TIME));
      /* Ensures fairly constant framerate */
      if (currentTime - oldTime > ANIMATION_DELAY)
        {
	  /* animate the scene */
	  Animate();
	  oldTime = currentTime;
	  /* compute the frame rate */
	  computeFPS();
	  /* notify window it has to be repainted */
	  glutPostRedisplay();
        }
        
     idle_tasks();
    }
}

开发者ID:kkharinarayanan，项目名称:cgass2，代码行数:25，代码来源:main.cpp

示例6: Animate

//  Keep the dart stationary relative to the dartboard (move with the dartboard), also allows dart to 
//  scroll off the screen, hides any darts that are entirely off the screen
void Dart::UpdateDart(int BGPos[]) {
	
	int actualloc[2];
	bool wrapping[2] = {false, false};
	actualloc[0] = loc[0] - BGPos[0]-2*8;
	actualloc[1] = loc[1] - BGPos[1]-2*8;

	if (actualloc[0] < 0) {
		actualloc[0] += 512;
		wrapping[0] = true;
	} 
	if (actualloc[1] < 0) {
		actualloc[1] += 256;
		wrapping[1] = true;
	}
	
	Animate();

	if ((wrapping[0] == true && actualloc[0]+8*8 < 512) || (wrapping[1] == true && actualloc[1]+8*8 < 256) ||
		(wrapping[0] == false && actualloc[0] > SCREEN_WIDTH) || (wrapping[1] == false && actualloc[1] > SCREEN_HEIGHT)) {
		SetObject(dartnumber,
		  ATTR0_SHAPE(0) | ATTR0_8BPP | ATTR0_REG | ATTR0_Y(0) | ATTR0_HIDE,
		  ATTR1_SIZE(2) | ATTR1_X(0),
		  ATTR2_ID8(64) | ATTR2_PRIO(2));				
	} else {		
		SetObject(dartnumber,
		  ATTR0_SHAPE(0) | ATTR0_8BPP | ATTR0_REG | ATTR0_Y(actualloc[1]) | ATTR0_AFF | ATTR0_AFF_DBL,
		  ATTR1_SIZE(2) | ATTR1_X(actualloc[0]) | ATTR1_AFF(dartnumber-1),
		  ATTR2_ID8(64) | ATTR2_PRIO(2));	  
	}
	
}

开发者ID:Steelbadger，项目名称:GBADarts，代码行数:34，代码来源:class.cpp

示例7: GetClientRect

void CExpensiveGiftCtrl::OnTimer(UINT nIDEvent) 
{
	if (nIDEvent == 1)
	{
		if(!m_bTrackLeave)
		   m_nPos+=m_nStep;                //开始相对应长度
       	CRect ClientRect;
    	GetClientRect(&ClientRect);
		if(m_nPos < ClientRect.Width()+m_cx*m_nItemNumber)
		{
			if(m_nAnimate==2)
			{
			   m_nAnimate=0;
			   Animate();
			}
			else
				m_nAnimate++;
		}
		Invalidate();                   //全部重刷
	}
	if (nIDEvent == 1300)
	{
		KillTimer(1300);
		OnUpNewRoadItem();
	}
	if (nIDEvent == 1301)
	{
		KillTimer(1301);
		m_bWaitRoadItem=FALSE;
		if(m_pRoadItem->GetCount()!=0)	//后面有队列,直接推上
			OnWaitNewRoadItem(TRUE);
	}
	CWnd::OnTimer(nIDEvent);

}

开发者ID:kkyoo，项目名称:TestKTV，代码行数:35，代码来源:ExpensiveGiftCtrl.cpp

示例8: Animate

void CSprite::AnimateThink( void )
{
	Animate( pev->framerate * (gpGlobals->time - m_lastTime) );

	pev->nextthink		= gpGlobals->time + 0.1;
	m_lastTime			= gpGlobals->time;
}

开发者ID:NoFreeWill，项目名称:MultiplayerSource，代码行数:7，代码来源:effects.cpp

示例9: Animate

void TwoDRenderer::Update()
{
    if (animate)
    {
        Animate();
    }
}

开发者ID:Jorge-Morales，项目名称:SideProject，代码行数:7，代码来源:2DRender.cpp

示例10: draw_atlantis

/*
 *-----------------------------------------------------------------------------
 *    Called by the mainline code periodically to update the display.
 *-----------------------------------------------------------------------------
 */
ENTRYPOINT void
draw_atlantis(ModeInfo * mi)
{
	atlantisstruct *ap = &atlantis[MI_SCREEN(mi)];

	Display    *display = MI_DISPLAY(mi);
	Window      window = MI_WINDOW(mi);

	MI_IS_DRAWN(mi) = True;

	if (!ap->glx_context)
		return;

	glXMakeCurrent(display, window, *(ap->glx_context));

	glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);

        glPushMatrix();
        glRotatef(current_device_rotation(), 0, 0, 1);
        AllDisplay(ap);
        Animate(ap);
        glPopMatrix();

        if (mi->fps_p) do_fps (mi);
	glXSwapBuffers(display, window);
}

开发者ID:mmarseglia，项目名称:xscreensaver，代码行数:31，代码来源:atlantis.c

示例11: Render

/**-----------------------------------------------------------------------------
 * 화면 그리기
 *------------------------------------------------------------------------------
 */
VOID Render()
{
    /// 후면버퍼와 Z버퍼 초기화
    g_pd3dDevice->Clear( 0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER, D3DCOLOR_XRGB(200,200,200), 1.0f, 0 );

	/// 애니메이션 행렬설정
	Animate();
    /// 렌더링 시작
    if( SUCCEEDED( g_pd3dDevice->BeginScene() ) )
    {
		g_pd3dDevice->SetTexture( 0, g_pTexDiffuse );							/// 0번 텍스쳐 스테이지에 텍스쳐 고정(색깔맵)
		g_pd3dDevice->SetSamplerState( 0, D3DSAMP_MAGFILTER, D3DTEXF_LINEAR );	/// 0번 텍스처 스테이지의 확대 필터
		g_pd3dDevice->SetTextureStageState( 0, D3DTSS_TEXCOORDINDEX, 0 );		/// 0번 텍스처 : 0번 텍스처 인덱스 사용

		g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLOROP,   D3DTOP_MODULATE);
		g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG1, D3DTA_TEXTURE );
		g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG2, D3DTA_DIFFUSE );

		DrawMesh( &g_matAni );
		if ( !g_bHideFrustum )
		{
			g_pFrustum->Draw( g_pd3dDevice );
		}

		/// 렌더링 종료
		g_pd3dDevice->EndScene();
    }

    /// 후면버퍼를 보이는 화면으로!
    g_pd3dDevice->Present( NULL, NULL, NULL, NULL );
}

开发者ID:blastingzone，项目名称:ComputerGraphicsAdvenced，代码行数:35，代码来源:HeightMap.cpp

示例12: fnAlarm

void fnAlarm(void)
{
	rt_uint32_t e;
	uint8_t buf,int_m,t=0;
	uint16_t delay1,delay2,strength;
	rt_thread_delay_hmsm(0,0,3,0);
	int_m = (clock_m+5)%60;
	rt_kprintf("It is %d:%d now\nAlarm Level %d\n",clock_h,clock_m,t);
	rt_event_send(reg_event,REG_ALARM_MSK);
	while (rt_mq_recv(key_mq,&buf,sizeof(uint8_t),0)!=RT_EOK)
	{
		if (clock_m==int_m)
		{
			t+=1;
			int_m = (int_m+5)%60;
			rt_kprintf("Alarm Level %d\n",t);
		}
		switch (t)
		{
			case 0: delay1 = 500; delay2 = 4500; strength = 400; break;
			case 1: delay1 = 1000; delay2 = 2000; strength = 600; break;
			case 2: delay1 = 500; delay2 = 500; strength = 800; break;
			default: delay1 = 500; delay2 = 250; strength = 1000; break;
		}
		SetAlarm(strength);
		rt_thread_delay_hmsm(0,0,0,delay1);
		SetAlarm(0);
		Animate(delay2);
	}
	rt_event_recv(reg_event,REG_ALARM_MSK,RT_EVENT_FLAG_OR|RT_EVENT_FLAG_CLEAR,0,&e);
	return;
}

开发者ID:KNCheung，项目名称:AlarmClockBeta，代码行数:32，代码来源:task_alarm.c

示例13: Update

void XboxLightRing::Update(byte err_code, bool isOn){
  if (err_code != 0){
    if (Animation.IsAnimating() == false) Animate(2); // General Error cycle
  }

  if (isOn && err_code == 0 && Animation.IsAnimating() == false){
    if (eColor == 0) { led1r_value = 0; led1g_value = 254; led2r_value = 0; led2g_value = 254;}
    if (eColor == 1) { led1r_value = 254; led1g_value = 254; led2r_value = 254; led2g_value = 254;}
    if (eColor == 2) { led1r_value = 254; led1g_value = 0; led2r_value = 254; led2g_value = 0;}
    if (eColor == 3) { led1r_value = 254; led1g_value = 0; led2r_value = 0; led2g_value = 254;}
    if (eColor == 4) { led1r_value = 0; led1g_value = 0; led2r_value = 0; led2g_value = 0;}
    
  }
  if (isOn == false && err_code == 0 && Animation.IsAnimating() == false){
    led1r_value = 0;
    led1g_value = 0;
    led2r_value = 0;
    led2g_value = 0;
  }

  // Update animations
  Animation.Update();

  // update leds
  analogWrite(led1g, led1g_value);
  analogWrite(led1r, led1r_value);
  analogWrite(led2g, led2g_value);
  analogWrite(led2r, led2r_value);

  if (bHddActive){
    if (analogRead(hddPin) > 100) analogWrite(led1r, analogRead(hddPin));
  }
}

开发者ID:jacobfk20，项目名称:xbox-FrontPlateController，代码行数:33，代码来源:XboxLightRing.cpp

示例14: Animate

void CCyclerSprite::OnTakeDamage( const CTakeDamageInfo& info )
{
	if( m_maxFrame > 1.0 )
	{
		Animate( 1.0 );
	}
}

开发者ID:oskarlh，项目名称:HLEnhanced，代码行数:7，代码来源:CCyclerSprite.cpp

示例15: Animate

int CCyclerSprite::TakeDamage(entvars_t *pevInflictor, entvars_t *pevAttacker, float flDamage, int bitsDamageType)
{
	if (m_maxFrame > 1)
		Animate(1);

	return 1;
}

开发者ID:AlexCSilva，项目名称:cs16-client，代码行数:7，代码来源:h_cycler.cpp

示例16: Animate

//-------------------------------------------------------------
//- Render
//- Renders the model in its position at time 0
//-------------------------------------------------------------
void CMs3d::Render()
{
	//Note: This function really isn't needed, as it preforms the same basic function
	//      as the render function below.  It is included to provide an implementation of the
	//      Render() function put forth in the CModel class.
	Animate(1.0f, 0.0f, 0.0f, false);
}

开发者ID:jinshizi，项目名称:rushcodes，代码行数:11，代码来源:ms3d.cpp

示例17: ChoosePixelFormat

void CMemoryCardView::CRender::ThreadProc()
{
	unsigned int nPixelFormat = ChoosePixelFormat(m_deviceContext, &m_PFD);
	SetPixelFormat(m_deviceContext, nPixelFormat, &m_PFD);
	m_hRC = wglCreateContext(m_deviceContext);
	wglMakeCurrent(m_deviceContext, m_hRC);

	glEnable(GL_TEXTURE_2D);
	glClearColor(1.0, 1.0, 1.0, 1.0);

	while(!m_threadOver)
	{
		while(m_mailBox.IsPending())
		{
			m_mailBox.ReceiveCall();
		}

		Animate();
		DrawScene();
		Sleep(16);
	}

	m_icons.clear();
	wglMakeCurrent(NULL, NULL);
	wglDeleteContext(m_hRC);
}

开发者ID:250394，项目名称:Play-，代码行数:26，代码来源:MemoryCardView.cpp

示例18: Render

/**-----------------------------------------------------------------------------
 * 화면 그리기
 *------------------------------------------------------------------------------
 */
VOID Render()
{
	UINT nPass;

    /// 후면버퍼와 Z버퍼 초기화
    g_pd3dDevice->Clear( 0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER, D3DCOLOR_XRGB(200,200,200), 1.0f, 0 );
	g_pd3dDevice->SetRenderState( D3DRS_FILLMODE, g_bWireframe ? D3DFILL_WIREFRAME : D3DFILL_SOLID );

	/// 애니메이션 행렬설정
	Animate();
    /// 렌더링 시작
    if( SUCCEEDED( g_pd3dDevice->BeginScene() ) )
    {
		if( g_bUseVS )	// 정점 쉐이더를 사용하여 출력?
		{
			g_pEffect->SetFloat( "g_fTime", (float)(timeGetTime()) / 100 );

			/// 정점선언값과 정점 설정
			g_pd3dDevice->SetVertexDeclaration( g_pDecl );
			g_pd3dDevice->SetStreamSource( 0, g_pVB, 0, sizeof(MYVERTEX) );

			/// fx출력에 사용할 테크닉 선정
			g_pEffect->SetTechnique( "MyShader" );
			
			/// fx를 사용한 출력개시
			g_pEffect->Begin( &nPass, D3DXFX_DONOTSAVESTATE );

			/// PASS 개수만큼 출력
			for( int i = 0; i < nPass ; i++ )
			{
				g_pEffect->BeginPass( i );
				g_pd3dDevice->DrawPrimitive( D3DPT_TRIANGLESTRIP, 0, 1 );
				g_pEffect->EndPass();
			}

			/// fx를 사용한 출력종료
			g_pEffect->End();
		}
		else
		{
			// fx를 사용한뒤에는 이 값을 NULL로 해야 D3D고정 파이프라인을 사용할 수 있다.
			g_pd3dDevice->SetVertexShader( NULL );
			g_pd3dDevice->SetPixelShader( NULL );
			g_pd3dDevice->SetStreamSource( 0, g_pVB, 0, sizeof(MYVERTEX) );
			g_pd3dDevice->SetFVF( MYVERTEX::FVF );
			g_pd3dDevice->SetTexture( 0, g_pTexture );
			g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLOROP,   D3DTOP_MODULATE );	/// MODULATE연산으로 색깔을 섞음
			g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG1, D3DTA_TEXTURE );	/// 첫번째 섞을색은 텍스쳐 색
			g_pd3dDevice->SetTextureStageState( 0, D3DTSS_COLORARG2, D3DTA_DIFFUSE );	/// 두번째 섞을색은 정점 색
			g_pd3dDevice->SetTextureStageState( 0, D3DTSS_ALPHAOP,   D3DTOP_DISABLE );	/// alpha연산은 사용하지 않음
			g_pd3dDevice->DrawPrimitive( D3DPT_TRIANGLESTRIP, 0, 1 );
		}

		g_pd3dDevice->EndScene();
    }

    /// 후면버퍼를 보이는 화면으로!
    g_pd3dDevice->Present( NULL, NULL, NULL, NULL );
}

开发者ID:blastingzone，项目名称:ComputerGraphicsAdvenced，代码行数:63，代码来源:main.cpp

示例19: SetAnimationProperties

MAS::Widget *MAS::Window::Popup(MAS::Dialog *p, int xx, int yy, MAS::Widget *f) {
   SetAnimationProperties(skin->winAnimationLength, skin->winAnimationType);

   Animate();
   Widget *ret = Dialog::Popup(p, xx, yy, f);
   ResetAnimation();
   return ret;
}

开发者ID:bambams，项目名称:ma5king，代码行数:8，代码来源:window.cpp

示例20: Animate

void CCyclerSprite::Think( void )
{
	if ( ShouldAnimate() )
		Animate( pev->framerate * (gpGlobals->time - m_lastTime) );

	pev->nextthink		= gpGlobals->time + 0.1;
	m_lastTime = gpGlobals->time;
}

开发者ID:Hammermaps-DEV，项目名称:SOHL-V1.0-Refresh，代码行数:8，代码来源:h_cycler.cpp

注：本文中的Animate函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ Animation函数代码示例发布时间：2022-05-30

C++ AnglesToAxis函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：18342|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9706|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8196|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8563|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8475|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9417|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8447|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7878|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8433|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7406|2022-11-06

客服电话

电子邮件

C++ Animate函数代码示例

示例1: Clear

示例2: Animate

示例3: Animate

示例4: return

示例5: onIdle

示例6: Animate

示例7: GetClientRect

示例8: Animate

示例9: Animate

示例10: draw_atlantis

示例11: Render

示例12: fnAlarm

示例13: Update

示例14: Animate

示例15: Animate

示例16: Animate

示例17: ChoosePixelFormat

示例18: Render

示例19: SetAnimationProperties

示例20: Animate

请发表评论

全部评论

上一篇：

下一篇：

chasinginfinity/ml-from-scratch: Machine

mkyong/spring3-mvc-maven-annotation-hell

床的笔顺,关于床的笔画,体会床的部首

zendesk/android-floating-action-button:

修改 Delphi 10.3.3 IDE 字体和字体大小

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053